Search Results

Search found 14216 results on 569 pages for 'nvidia settings'.

Page 14/569 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• nvidia ignores the resolution listed in xorg.conf, even though I have 'nvidia-settings --load-config-only' on startup

  - by ihadanny

  when my machine boots, I see a nice 1920X1080 resolution screen, but the minute I login to my user, it's reverted to an ugly 720Xwhatever. When I run nvidia-settings and select 1920X1080, it's ok again. What am I missing??? my /etc/X11/xorg.conf contains: Section "Screen" ... Option "metamodes" "nvidia-auto-select +0+0; 1920x1080 +0+0" ... EndSection I'm using unity 3.8.16 on ubuntu 11.04, and when I check on gnome-session-properties I see that I have sh -c '/usr/bin/nvidia-settings --load-config-only on my startup.

  Read the article

• Tuning Nvidia driver in Nvidia X Server Settings in Ubuntu to avoid tearing?

  - by c00kiemonster

  I'm running Ubuntu 10.10 on an Asus at3ion motherboard. I have installed the proprietary nvidia drivers and everything is working fine, but it's a but ragged when I move windows etc. I think the issue is called tearing. There is flickering and the window isn't refreshed smoothly. The ion acceleration works fine (I am running xbmc at 1080p completely without any issues). Please note I am not interested in any fancy effects etc, I just want the graphics to be smooth and nice. How can I tune the nvidia driver for this, i.e., what do I need to change in the Nvidia X Server Settings?

  Read the article

• Win 7 dual monitor: Don't move application windows when turn off second monitor

  - by codewaggle

  The title is correct, it should say "Don't" not "Doesn't". I Don't want the application windows to be moved to the main monitor when I turn off the monitors. On my Win XP dual monitor system, I can turn off the monitors and when I turn them back on, the application windows are in the same locations on the same monitors as when I turned the monitors off. On the Win 7 system, every time I turn off the monitors (or just the second monitor), all of the application windows are moved to the "main" monitor. After experimenting with the settings, I've found one process that enables me to turn off the monitors and still keep my application windows laid out in my chosen locations on the two monitors: 1) Switch the display setting to a single monitor. 2) Turn off the monitors. 3) Turn on the monitors. 4) Switch the display setting back to "Extend these Displays". After step 4, the application windows that I had laid out on the second monitor are moved back to their original locations on the second monitor. Is there a windows or nVidia setting that would leave the application windows on the second monitor so that I don't need to switch the display settings every time I turn off the monitors? Specs: Windows 7 64-bit dual monitors (1 DP, 1 DVI) Desktop (most questions seem to be about laptops) nVidia Quadro 2000 nVidia Control Panel nVidia nView Control Panel

  Read the article

• Appearance, Online accounts disappeared in System Settings in Ubuntu 13.10

  - by ptanmay143

  I was installing apps and icons and I notices that there were about 4 games installed, so I went to software centre to remove them then I wanted to add my Facebook account in Online Accounts but Alas! It was disappeared. But it was there when I searched for Online Accounts in Unity Dash. Please help me. I think I might have uninstalled wrong packages. Can anyone tell me the packages that are associalted with them. I am attaching a screenshot of my settings and the Online Accounts appearance in Unity Dash.

  Read the article

• ~/.xsession-errors is 2.7gb big (and growing), on fresh install, caused by gnome-settings-daemon errors

  - by Alex Black

  I've just installed Ubuntu 10.10 x64, activated the recommended Nvidia drivers, and I noticed my hard disk space is disappearing, I narrowed the culprit down to this: alex@alex-home:~$ ls -la .x* -rw------- 1 alex alex 4436076400 2010-11-19 22:35 .xsession-errors -rw------- 1 alex alex 10495 2010-11-19 21:46 .xsession-errors.old Any idea what this file is, why its so big, and why its growing? A few seconds later: alex@alex-home:~$ ls -la .x* -rw------- 1 alex alex 5143604317 2010-11-19 22:36 .xsession-errors -rw------- 1 alex alex 10495 2010-11-19 21:46 .xsession-errors.old tailing it: alex@alex-home:~$ tail .xsession-errors (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed (gnome-settings-daemon:1514): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed Also, the process "gnome-settings" seems to be using 100% cpu: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1514 alex 20 0 268m 10m 7044 R 100 0.1 7:06.10 gnome-settings-

  Read the article

• System Settings icons missing

  - by pst007x

  Is there any way to reset the System Settings Control Panel page? The Control Panel was fine, but the for no apparent reason, PRIVACY, BACKGROUND and a host of other icons have vanished... My system seems pretty messed up after the upgrade... Shutdown, Reset, and Logout from the menu no longer work either... However, I can launch the Privacy panel from the terminal: activity-log-manager and it runs... so why is this, and others, now missing from the System Setting Control Panel? I have checked and: activity-log-manager-control-center is installed Is there a config file I can check, or a setting in Gconf where the list of icons are referenced? I have run - in desperation - sudo apt-get purge unity* sudo apt-get purge ubuntu* sudo apt-get autoremove Run Gconf-cleaner and Janitor then re-installed all packages Still the same issue....?

  Read the article

• Why are my 32bit OpenGL libraries pointing to mesa instead of nvidia, and how do I fix it?

  - by Codemonkey

  I have installed Nvidia's drivers on my Ubuntu 13 system, but according to this command (ldconfig -p | grep GL): $ ldconfig -p | grep GL libQtOpenGL.so.4 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libQtOpenGL.so.4 libGLU.so.1 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLU.so.1 libGLEWmx.so.1.8 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLEWmx.so.1.8 libGLEW.so.1.8 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/libGLEW.so.1.8 libGLESv2.so.2 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/mesa-egl/libGLESv2.so.2 libGL.so.1 (libc6,x86-64) => /usr/lib/libGL.so.1 libGL.so.1 (libc6) => /usr/lib/i386-linux-gnu/mesa/libGL.so.1 libGL.so (libc6,x86-64) => /usr/lib/libGL.so libEGL.so.1 (libc6,x86-64) => /usr/lib/x86_64-linux-gnu/mesa-egl/libEGL.so.1 The 32bit version of OpenGL is pointing to mesa's libraries instead of nvidia. This causes my Steam games to refuse to launch with the error: Could not find required OpenGL entry point 'glGetError'! Either your video card is unsupported, or your OpenGL driver needs to be updated. Why is this the case? When the nvidia installer asked me if I wanted to install "32bit compatability libraries" (or something like that) I chose yes. How do I fix this? Edit: I just reinstalled the same Nvidia driver, and that apparently removed the 32bit OpenGL driver completely: $ ldconfig -p | grep libGL.so libGL.so.1 (libc6,x86-64) => /usr/lib/libGL.so.1 libGL.so (libc6,x86-64) => /usr/lib/libGL.so Now Steam won't start: You are missing the following 32-bit libraries, and Steam may not run: libGL.so.1 Again, I chose YES when the installer asked me if I wanted to install 32bit libraries. Why are they not installed!?

  Read the article

• Is it possible to get xRandR to see two separate outputs with the nvidia driver?

  - by rumtscho

  I have two monitors, which I have set up with nvidia-settings in Twinview. The result: When I want to do something in xRandR, it does not function. It doesn't report one output per video card head, but a single output mapped to the combined area of both monitors: rumtscho@bradbury:~$ xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 3840 x 1440, current 3840 x 1440, maximum 3840 x 1440 default connected 3840x1440+0+0 0mm x 0mm 3840x1440 50.0* Now I promised somebody to help test a driver. The developer is using an open source driver for Intel video cards, and his driver assumes that there is more than one xRandR output, each mapped to a monitor. So I tried rewriting my xorg.conf to somehow get two outputs to show up, but failed. Googling showed that people faced with the xRandR-nvidia problem either stopped using xRandR and achieved what they needed with nvidia-settings, or changed their driver to nouveau. The first is not going to help in my situation, and I am not willing to give up the proprietary driver, because Compiz won't work without it. So does anybody know a way to get nvidia to actually pass on information on outputs to xRandR?

  Read the article

• No TV-Out on Windows 7 with Nvidia Geforce 9400GT

  - by Alon

  I have Windows 7 x64 and a Nvidia Geforce 9400GT video card. I have connected my TV (SANSUI LCT40SD SAKURA) to my computer/video card with S-Video. When I try to set up multiple displays in Nvidia Control Panel, I can't find the TV. I have only my normal screen "LG W1934" which is enabled. How can I fix it? Thank you.

  Read the article

• Nvidia Gefore 9800 GT Low FPS [closed]

  - by AskaGamer

  I have a Nvidia Geforce 9800 GT would like to improve the performance especially with regards to the FPS. Is there some setting on my Nvidia panel that I can modify to change my FPS? Does anyone know of a good overclocking tool that will work the way it should?

  Read the article

• Why do I see nvidia-185-modaliases and nvidia-195-modaliases in Ubuntu software updates?

  - by bstpierre

  For some reason I see both the Ubuntu 185 and 195 drivers in the Ubuntu Update Manager. In the NVidia X server settings I see the driver as version 185.18.36. I think I managed to install two versions of the NVidia drivers at the same time.

  Read the article

• nvidia on ubuntu 10.10: switching dvi socket

  - by lurscher

  i have ubuntu 10.10 x86_64 with nvidia 9800 gt and nvidia driver version 270.41.06 my video card has two DVI sockets, but i only use single monitor configuration. Now, i think the main DVI socket might be busted, so i want to try to enable the other as the main one, however, i don't know how to achieve that. I tried just plugging the monitor in that socket but it won't just auto-detect (it would have been way too easy to just work)

  Read the article

• Installed nvidia driver, activated it, and now Unity is gone. No bars, menus, nothing

  - by Noel

  I installed the nvidia driver (installed the ubuntu-x-swat ones, updated them, got the updates for them, installed bumblebee. I restarted everytime I did those steps, so no, i don't simply need to 'restart X'. I tried to run things using bumblebee, but bumblebee was like "can't access GPU driver". So I ran nvidia-settings, it said the drivers weren't in use, so I ran "sudo nvidia-xconfig", then restarted. Now, my login screen looks differently than it did before: it asks me if I want to load: "GNOME, GNOME - no effects, Cairo Dock - GNOME, System Default, or Ubuntu" when I log in, but WORST OF ALL: i no longer have any kind of GNOME/unity GUI. There are no title bars above any windows, no close/minimize/maximize buttons. The unity bar is gone, and will not show up when I call it. And the top status bar is also no longer there.

  Read the article

• How to remove tearing in videos with Nvidia driver?

  - by Daimon

  I'm using ubuntu 11.10 as my HTPC OS on ION board. Tearing was always a big problem but this guide (http://www.omgubuntu.co.uk/2010/01/how-to-fix-video-tearing-in-videos-nvidia-ubuntu/) used to solve it in previous versions. I mean it used to because it doesn't solve it anymore. I tried making same changes (although compiz config is little different and same options are in different panels) but with no success. I also tried to manually set resolution and refresh rate of HDTV in nvidia settings - no changes at all. I know that open source drivers would solve a problem but it's not an option because I need VDPAU acceleration. I've also read that completely disabling of Composite solves the problem - can't do that because compizconfig-settings-manager crashes on attempt. More info about setup: Ubuntu 11.10 64bit Nvidia ION board newest official version of proprietary driver SMplayer with vdpau settings Full HD HDTV

  Read the article

• How do I figure out which version of OpenCL comes with my nvidia-current-dev package?

  - by levesque

  I am running Ubuntu 10.04 with an nvidia geforce GT 240 card. I installed nvidia-current-dev with apt-get, thus I got a bunch of headers and lib files for OpenCL. However, I am unable to figure out if I have OpenCL 1.0 or 1.1 (could be 1.2, though I doubt it). Does anyone know a way to figure out which version of OpenCL comes with the nvidia-current-dev package (version: 195.36.24-0ubuntu1~10.04.2)? If not, is there another place where I could get an answer?

  Read the article

• Newly installed 12.04 on Radeon or NVIDIA type of gfx card?

  - by Falk

  I use a Nvidia Quadro NVS 290/PCIe/SSE2 at work with dual monitor setup. Since 11.10 things has gone downwards with performance. But now with 12.04 performance is even worse, and I can agree that the 290 is old and puny. So when I look what low profile cards I can get to my computer today, the choice it Radeon HD 6570 or NVIDIA Quadro 600. I have always used Nvidia on linux beq I think that historically their drivers worked better. But which one do you recommend today on 12.04 and Unity3d? -- Regards Falk

  Read the article

• Installed nvidia graphics driver (current, 8800GTX) has issues, how do I disable/uninstall it?

  - by Craig

  I installed the restricted nvidia graphics driver (current) on my computer, then restarted to finish the install. Upon reboot I got some prompt about there being an X server problem, It told me to try auto-fixing or something, none of its options worked, they all failed horribly and caused the computer to crash immediately on selecting any of them. I decided to re-install. Again I got in, downloaded updates, and installed the driver. This time upon boot the X-server immediately crashes and im brought to tty1. If I hit ctrl+alt+F7 I see a beige-background prompt says the usual about checking battery state, pulse audio etc., you see right before the x-server starts. According to X (if I do sudo startx) there are no displays, and the nvidia graphics driver is not working. First off, how do I set ubuntu back to the default driver (I have only a CLI right now -.-), then how do I install a more appropriate nvidia driver

  Read the article

• How do I install the latest NVIDIA drivers from the .run file?

  - by Shahe Tajiryan

  This is what I am trying to do. I downloaded the latest driver for my VGA from http://www.nvidia.com. The installation needs the X11 to be shut down, so I log out of my account, then press Ctrl+Alt+F1, then log in with my username and password, then run the command sh NVIDIA-Linux-x86_64-285.05.09.run in every possible way, I have even tried CHMODing the package with 777 permissions, but still I'm getting the sh: can't open NVIDIA-Linux-x86_64-285.05.09.run error. Any help would be greatly appreciated.

  Read the article

• How do I install latest NVIDIA drivers from the .run file?

  - by Shahe Tajiryan

  This is what I am trying to do. I downloaded the latest driver for my VGA from http://www.nvidia.com. The installation needs the X11 to be shut down, so I log out of my account, then press CTRL+ALT+F1, then log in with my username and password, then run the command sh NVIDIA-Linux-x86_64-285.05.09.run in every possible way, I have even tried CHMODing the package with 777 permissions, but still I'm getting the sh: can't open NVIDIA-Linux-x86_64-285.05.09.run error. Any help would be greatly appreciated.

  Read the article

• NVIDIA GeForce GT750M drivers for Ubuntu 13.10 on iMac

  - by Eugene B

  I have just got a new iMac 14.3 with 21.5' display. It has Intel i7 processor and NVIDIA GeForce GT750M graphics card with GPU (Device ID: 0x00fe9). I have installed Ubuntu 13.10 on it (dual boot with refit). Everything works fine apart from graphics. It is clear that graphics' not accelerated, and there are no drivers suggested in the "Additional drivers" section. I have tried to Install nvidia drivers from the repository. Download nvidia drivers and install them manually. Follow instructions here. Follow instructions here. Follow instructions here. Install bumblebee. Play around with xorg.conf file. Blacklist nouveau. As you may guess, nothing worked. The weirdest thing is, that when I boot from a LiveCD, it picks up screen resolution and all the rest correctly, though when I install the system to my Hard Drive it clearly does not have proper drivers. Does anyone have any suggestion what to do?

  Read the article

• Windows 7 - Can't get my TV working as primary display with nVidia 7900GS

  - by Daniel Schaffer

  I just installed Windows 7 Ultimate 64 RTM (from MSDN) on my HTPC, which is connected to a 42" Magnavox LCD TV via component cables to my nVidia 7900GS. Everything was fine through the installation until I went to install the official driver from nVidia. Towards the end of the installation, the TV blinked off and wouldn't come back on. I went and got an LCD monitor and plugged it into a DVI port and the monitor came right up, but was automatically selected as the primary display. Now, if I set the TV to be the primary display, the TV just blanks until I hit escape to cancel the "settings have changed, do you want to keep them" dialog. Any suggestions? Update: I'm able to set the TV as the primary display using the Windows 7 "screen resolution" configuration panel. However, if I try to remove the LCD monitor either by unplugging it or using the configuration, the TV blanks out again. Update 2: This setup was working correctly in Vista Home Premium 32-bit. Update 3: I've uninstalled the nVidia driver and am using the driver that Windows Update installed. As much as this offends my geek sensibilities (must use the "right" driver!!), well, It Works™.

  Read the article

• 3 Monitors, Ubuntu 12.04, Gnome 3, 2 nvidia cards, WITH xrandr or xinerama?

  - by Josh

  Ok. I have been banging my head against the wall for over a week now trying to get 3 monitors to work. I have: 1 - Nvidia 8600 GT 512MB PCIEx16 1 - Nvidia GT 240 1GB PCIEx16 They are not running in SLI (obviously). I have tried to use everything from tutorials to a few templates, all the way up to nvidia-settings, etc etc etc.. From what I hear, Xinerama doesnt like gnome 3 because of the compositing, although I have read a lot about using Xrandr instead, and getting the compositing working, but alas, I cannot. It always either crashes X and I have to replace the xorg.conf with my backup, or it defaults to the gnome-classic desktop, and on top of that, when it does default, it keeps adding more and more panels. Basically, I want to be able to use all 3 monitors (yes, just like in windows) to drag and drop from different windows. I have xorg-edit, but I am still not too sure on how to set this up? Is there any way to: A Get compositing working with 3 monitors, 2 nvidia cards, xinerama, and gnome 3? or BUse twinview with 3 monitors (I have heard it can be done by manually editing xorg.conf) or CSet up Xrandr to draw all 3 monitors with compositing. or DUse separate X for each monitor, and be able to use gnome with compositing, as well as drag between all 3 or EANYTHING. lol. I just want this to work. Any help you can provide would be greatly appreciated. BTW, I am running an ubuntu mini install with gnome. Everything works great but this. I can run it fine with 2 monitors and compositing, but not with 3. Also, what is the best GUI tool for editing xorg.conf? Im not finding anything that is up to date at all, and also is understandable by humans. haha. Im actually an engineer by trade, and have been working with computers a LONG time, but this xorg.conf stuff is really confusing the crap out of me. lol Thanks!

  Read the article

• How do I disable a Nvidia 9600GT on MacBookPro 5.1?

  - by Gjan

  i finally put up a Dual Boot with Ubuntu and Lion on my old MacBookPro 5.1 As reported in many cases the discrete graphics card is turned on all the time consuming a lot of power and thus heating up the laptop. Since the discrete graphics card does not support the nvidia optimus technology, the corresponding packge nvidia-prime does not help in this case. Therefore my question is, how to manually disable the discrete graphics card Nvdidia 9600GT ? Preferably a 'switch-on-the-run' version, but a 'set-on-boot' would be totally fine!

  Read the article

• How to get GUI back after freeze interrupted an Nvidia driver update?

  - by Reinere

  I just went through a driver update. The OS froze, so I had to hard reboot the PC. Now I just get the login prompt in terminal. So, I tried to run startx. codeError: API mismatch: the NVIDIA kernel module has version 304.43 but this NVIDIA driver Component has version 295.49` I just got this error. I have to type sudo su then modprobe ndiswrapper to get my Wi-Fi to work, so step by step instructions after that would be greatly helpful.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >