Search Results

Search found 1323 results on 53 pages for 'onboard vga'.

Page 14/53 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work

    - by Victor S
    I'm running Ubuntu 11.10, FF 11, ATI Catalyst v12.2, Driver Package version 8.95, WebGL doesn't work. This is a pretty capable setup and definetly did have FF work previously, Note: I've downloaded and installed the ATI drivers from AMD. Not sure how to get WebGL working. Updated My video card info: 01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller]) Subsystem: ATI Technologies Inc Device 0b00 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fbee0000 (64-bit, non-prefetchable) [size=128K] I/O ports at d000 [size=256] Expansion ROM at fbec0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [150] Advanced Error Reporting Kernel driver in use: fglrx_pci Kernel modules: fglrx, radeon

    Read the article

  • Could not apply stored configuration for monitors

    - by Hernantz
    Well this happened when I upgraded to Natty. Not only seems I can't change my resolution to higher than 1024x768 but it appears at the left and using only 70% of the monitor's width. I tried logging in but in ubuntu classic mode, and i was able to change it, but that trick did not work anymore. (May this be a compiz problem?) Anyways, here is my /var/log/Xorg.0.log http://pastebin.com/Ew4wwLab and lspci -nn | grep VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) I tried using xrandr for adding manually a resolution of 1280x1768 but without luck. Here is the xrandr output Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0*+ 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) TV1 disconnected (normal left inverted right x axis y axis) 1280x1024 (0xc6) 109.0MHz h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz

    Read the article

  • How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

    - by rewbs
    I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

    Read the article

  • How to make "xrandr" work with GMA500?

    - by Nwbie
    Is it error at driver of graphic chip or Xorg or kernel? I am Asus T91mt with GMA500, Ubuntu 12.04.1. I would like too see only a notice of connection at least. A log of xrandr: $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation System Corporation System Controller Hub (SCH Poulcbo) Graphics Controller (rev 07) vp@vc:~$ xrandr --verbose xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 (0x138) normal (normal) 0mm x 0mm Identifier: 0x137 Timestamp: 26863 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1024x600 (0x138) 0.0MHz *current h: width 1024 start 0 end 0 total 1024 skew 0 clock 0.0KHz v: height 600 start 0 end 0 total 600 clock 0.0Hz vp@vc:~$ xrandr --prop xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 600, current 1024 x 600, maximum 1024 x 600 default connected 1024x600+0+0 0mm x 0mm 1024x600 0.0* vp@vc:~$ Please help, i am linux newbie and i am tired ;/

    Read the article

  • GPU hung when switching graphic card

    - by Lie Ryan
    I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

    Read the article

  • Monitor not detected - low resolution only

    - by Jens
    I just installed Ubuntu 11.1 on my desktop pc. It was a clean install, no upgrading. I have a Samsung Syncmaster BX2450 connected to the PC. My problem is that I cannot make Ubuntu recognize my monitor - which is capable of more than 1024. I ran a shut down of lightdm, and ran sudo X -configure, but it gave me a "configuration failed". Nothing seems to work - any ideas? VESA: GF119 Board - 13100000 xx@xxx:~$ lspci -nn |grep VGA 02:00.0 VGA compatible controller [0300]: nVidia Corporation GT520 [GeForce GT520] [10de:1040] (rev a1) xx@xxx:~$ xrandr -q xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 61.0* 800x600 61.0 640x480 60.0

    Read the article

  • How to set the monitor to its native resolution when xrandr approach isn't working?

    - by Krishna Kant Sharma
    I am trying to setup my Samsung syncmaster B2030 monitor in ubuntu 12.04. It's native resolution is 1600x900 which I am not getting in ubuntu and which I am trying to get. I tried using xrandr approach provided in these urls: 1) http://www.ubuntugeek.com/how-change-display-resolution-settings-using-xrandr.html 2) How to set the monitor to its native resolution which is not listed in the resolutions list? S1) I used cvt 1600 900 60 to get the modeline. Output was: # 1600x900 59.95 Hz (CVT 1.44M9) hsync: 55.99 kHz; pclk: 118.25 MHz Modeline "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync S2) I then used xrandr and output was: Screen 0: minimum 8 x 8, current 1152 x 864, maximum 8192 x 8192 DVI-I-0 disconnected (normal left inverted right x axis y axis) VGA-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) which gave me "VGA-0". S3) Then I used xrandr --newmode "1600x900_60.00" 118.25 1600 1696 1856 2112 900 903 908 934 -hsync +vsync But instead of adding the modeline it just threw an error: X Error of failed request: BadName (named color or font does not exist) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 16 (RRCreateMode) Serial number of failed request: 29 Current serial number in output stream: 29 My system details: 1) ubuntu 12.04 LTS 2) Graphic card: GeForce 9400 GT/PCIe/SSE2 (driver is successfully installed. I am checking it in System Settings Details. And it's showing that driver is installed and its "GeForce 9400 GT/PCIe/SSE2") 3) Monitor: Samsung syncmaster B2030 4) Resolutions I am getting: 800x600 1024x768 1152x864 (I am currently using this one) 1360x768 (this one isn't working properly) Does anyone know what I can do? Thanks in advance. UPDATE (1): Today I tried it again. And adding a modeline (using --newmode) worked. But when I used --addmode by: xrandr --addmode VGA-0 1600x900_60.00 It gave this error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 153 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30

    Read the article

  • How do I install the Intel Graphics driver in my system?

    - by John
    Can someone help me out and explain or point me in the right direction on how to check video drivers and see if my video card running okay? I had 10.04 installed on my Thinkpad r61 with Compiz Manager and life was great, until the machine took water damage. I bought an ASUS (X54H) since and am trying out 12.04, but the desktop just doesn't look right. I always struggled with video driver installation. There are no proprietary drivers available in the hardware manager. When I run lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) I will greatly appreciate your help. I want to use Linux more, but like I said video drivers appear to be my biggest concern. I have also tried 12.04 on my desktop PC, but again failed to configure video card, so switched back to Windows 7.

    Read the article

  • Can't activate "mirror display"

    - by Nemo Peeters
    I have Ubuntu 12.04 on a Dell latitude E6410, I have a problem when using the VGA output I always have dual monitor and can't switch on the "mirror display" toggle under systems setting/displays. It's rather annoying when having to do presentation with a video projector. the option "mirror display" is in light grey and I can"t tick the box. Thanks for those who might have an idea how to resolve this? update: driver is: Intel® Ironlake Mobile x86/MMX/SSE2 card something like this ? description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 64 bits clock: 33MHz

    Read the article

  • Mint 13 no longer using NVidia card after restart

    - by GenericUsrnme
    Here's the story; I bought a new graphics card, along with other parts, about a week ago. I put them in, install new drivers everything's working fine. Now after a restart I boot into some lovely 1024x768 resolution with only one screen on. I check in the NVidia X Server settings to see if my screen was changed there, there's nothing there except Application profiles and nvidia-settings. I check hardinfo to see if the card is actually recognised; VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 660] (rev a1) (prog-if 00 [VGA controller]) I don't really know much about the graphics end of things so I'm not sure what I should be doing here to fix this, I don't even know what I should be looking FOR even, so any help is much appreciated! Thanks in advance

    Read the article

  • Freezes if desktop effects is used.

    - by munir
    I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

    Read the article

  • Gnome-shell video freeze

    - by josephsmendoza
    So i have a 14.04 Ubuntu Gnome Live USB on my 16GB USB 3.0. It runs fine except sometimes it the screen will freeze, but I know stuff is still happening cause I can hear media playing. I did a little digging and i'm still not sure why, can someone help? Sorry if i don't provide enough details. ubuntu-gnome@ubuntu-gnome:~$ lspci -nnk | grep -iA2 VGA 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9400}[10de:0867] (rev b1) Subsystem: Apple Inc. iMac 9,1 [106b:00ad] Kernel driver in use: nouveau

    Read the article

  • Graphics card support

    - by Daryl
    Brand new user to Ubuntu and Linux. Quick question that I think already know the answer to: Does Ubuntu 11.10 have an updated driver for my graphics card? I was planning on being able to s-video out and watch videos on my tv like I could when I had Vista installed. daryl@daryl-Aspire-3050:~$ lspci -nn | grep VGA 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS482 [Radeon Xpress 200M] [1002:5975] ATI Radeon Xpress 1100 is the actual card. As it is, Ubuntu is not recognizing when I plug an s-video cable into my laptop. I've narrowed it down to using what I think is a generic driver because all of the s-video enable commands I found and tried have failed.

    Read the article

  • Trouble with 12.10 lag

    - by Brennan
    Well basicly lately I have been having lag problems with 12.10. I will post my specs, but before the update to 12.10, it said that I had intel graphics. Now it says I have Gallium. My specs: *Memory: 3.9 GiB *Processor: Pentium(R) Dual-Core CPU E5500 @ 2.80GHz × 2 *Graphics: Gallium 0.4 on llvmpipe (LLVM 3.2, 128 bits) (used to say intel graphics) *OS Type: 32-bit *Disk: 486.1 GB The output of the command sudo apt-cache check is this: E: Invalid operation check The output of the command sudo lspci -nnk | grep -A5 VGA is this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:836d] Kernel driver in use: i915 00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01) Subsystem: ASUSTeK Computer Inc. Device [1043:8445] Kernel driver in use: snd_hda_intel

    Read the article

  • How can I use two video cards to power three screens?

    - by notatoad
    I have two Radeon 6450 graphics cards in my computer, with three screens. Only the screens plugged into the first graphics card are recognized and configurable in the displays setting panel. How can I use the displays plugged into my second graphics card? Both cards are present in lspci: 01:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 01:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] 02:00.0 VGA compatible controller: ATI Technologies Inc NI Caicos [AMD RADEON HD 6450] 02:00.1 Audio device: ATI Technologies Inc NI Caicos HDMI Audio [AMD RADEON HD 6450] I'm using the open source driver instead of the proprietary driver because the proprietary driver won't output 1440x2560.

    Read the article

  • display port on x230 not working

    - by Aaron
    having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

    Read the article

  • Freezes if desktop effects is used [closed]

    - by munir
    I have found that using desktop effects in Ubuntu versions later than 8.10 causes the desktop to freeze after a few seconds on my PC. the command lspci -nn gave the following 00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2772] (rev 02) and with lspci -k I have 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) Kernel driver in use: i915 Kernel modules: i915 The intel graphics cards seems to have some performence issues with xorg driver. However I have not noticed any freeze in Ubuntu 8.10. There are some workarounds at https://wiki.ubuntu.com/X/Bugs/Lucidi8xxFreezes to make them work. But I can't find out what workaround should I do with my graphics controller. I have tried workaround F but it did not help. can anyone help me find a workaround for my graphics card? and is it actually possible to use desktop effect in this graphics card ?

    Read the article

  • Crash on shutdown when using second monitor

    - by plua
    I have recently added a second monitor to my setup. Instead of one VGA monitor, I now have one VGA and one DVI monitor hooked up to the computer. The displays work just fine. However, ever since this monitor was added Ubuntu (10.10) does not shut down properly. I go to shutdown and it starts shutting down but just hangs and I need to manually shut it down. This has been like this for weeks and I feel not comfortable shutting it down this way over and over again. Has anybody any idea what this can be? Or, also useful, does anybody know how to get some info on why this crash occurs? Any logs that can be used for this? Thanks! Paul

    Read the article

  • Can't set proper resolution with a Geforce 520

    - by D0X
    I installed the 12.04 LTS but cannot get my two monitors working. The latest nvidia-current drivers installed, but i just cant set proper resolution. My card is a geforce 520 1 DVI 1 VGA. With the nvidia drivers installed i can set the DVI monitor to 1600x1200 but the VGA no further than 1360x768 (with nvidia-settings). Without the nvidia driver (using the nouveau) it doesn't work either. This same issue i had with 11.10 and i had high hopes for 12.04.

    Read the article

  • Monitor not recognised after apt-get upgrade on 11.10 - maximum 1024x768 resolution

    - by Josh
    I did an apt-get upgrade through update manager on 11.10. After restarting my VGA monitor is no longer recognised and I can only get a maximum of 1024x768 on a 1440x900 monitor. I can't find xorg.conf so I am pretty lost! xrandr output: Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DVI-0 disconnected (normal left inverted right x axis y axis) S-video disconnected (normal left inverted right x axis y axis)

    Read the article

  • How can I solve display glitches and poor performance with ATI fglrx driver on my ThinkPad X100e?

    - by rewbs
    Hi all, I noticed that video performance on my Thinkpad X100e was very poor compared to Windows 7, so I installed the ATI fglrx proprietary drivers by using the "Additional Drivers" dialogue box. The system has an ATI Radeon Mobility HD 3200 chip. The result of installing the drivers is pretty devastatingly negative, with symptoms such as skewed content in windows, browser tabs and text boxes failing to refresh when their content changes. In fact, please excuse typos in this post, because I can't really see what I am typing. :) I also notice that HD video playback performance is no better - perhaps even worse - than prior to installing the drivers. Example of what I see: Here's the output of fglrxinfo: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 3200 Graphics OpenGL version string: 3.3.10237 Compatibility Profile Context Output of lspci | grep -i vga: 01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] I'm on Ubuntu 10.10 with kernel 2.6.35-22-generic-pae. What can I try? Many thanks, -R

    Read the article

  • display port on x230 not workgin

    - by Aaron
    having problems with my new lenovo x230 - using dual montiors, only vga registers anything. This has the Intel graphics controller : 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) TO get it to even boot, had to add the nomodeset parameter to the kernel. Otherwise will not even start up X Ive upgraded my kernel to the latest 3.6 with no difference. The display section reads the monitor as the only display and labels it as laptop. Cant seem to get it to work! Any help would be greatly appreciated.

    Read the article

  • Why am I stuck at 640x480 on an Optimus hybrid-graphics system?

    - by exilada
    I have Intel HD 3000 graphics card onboard and nvidia 520 mx optimus techolonogy card. I was try to install Nvidia driver but it was failure. Now I cant use anything. Have one resolution 640x480 every media disconnected and I cant connect $ xrandr Screen 0: minimum 320 x 200, current 640 x 480, maximum 8192 x 8192 LVDS1 connected 640x480+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 640x480 59.9* VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09 ) glxinfo | grep vendor server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: Tungsten Graphics, Inc Blockquote something wrong here I guess I try to some solutions but didnt work even it cant nvidia-xconfig file after these By the way system get eror sometimes about xorg Sorry for my English thaks for help.

    Read the article

  • ubuntu 13.10 secondary monitor - doesn't redraw properly

    - by Daniel
    Hi I've just installed Ubuntu 13.10 on a Lenovo w350 and am having some issues with graphics driver. standard nouveau drivers work great on the laptop display but when I attach an external display it goes bad on the external monitor, seems it's not re-drawing properly. (Photo attached). I've tried other drivers but none of them detect the external monitor when connected. Any ideas? 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K1000M] (rev a1) screenshot of effected monitor -- http://i.imgur.com/UZWMpQO.jpg UPDATE 1: I have noticed that if I leave the System Monitor open the display improves. Wierd. UPDATE 2: If I leave a video going the lag/flicker issues stop.

    Read the article

  • Inserting x200s into (ultrabase) docking station mirror screen is always activated leading to non optimal resolution

    - by kiu
    Builtin LCD should be 1440x900 External LCD should be 1920x1080 If X200s is inserted into docking station the option mirror screen is always activated leading to a resolution of 1152x864 which looks terrible on the builtin and external lcd. My manual configuration for docking mode (seperate screens with maximum resolution) should be respected, but "Make Default" button has no consequences. Found a quick fix, but this cant be the offical ubuntu way... /etc/udev/rules.d/99-vga.rules: SUBSYSTEM=="drm", ACTION=="change", RUN+="/usr/local/sbin/vga_changed.sh" /usr/local/sbin/vga_changed.sh: #!/bin/bash dmode="$(cat /sys/class/drm/card0-VGA-1/status)" export DISPLAY=:0.0 if [ "${dmode}" = disconnected ]; then /usr/bin/sudo -u kiu /usr/bin/xrandr --output LVDS1 --mode 1440x900 --pos 0x0 --output VGA1 --off elif [ "${dmode}" = connected ]; then /usr/bin/sudo -u kiu /usr/bin/xrandr --output LVDS1 --mode 1440x900 --pos 0x0 --output VGA1 --auto --mode 1920x1080 --right-of LVDS1 fi

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >