Search Results

Search found 1323 results on 53 pages for 'onboard vga'.

Page 13/53 | < Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >

  • Diagnosing PC crashes (most often while using shared folders or torrents)

    - by Dyppl
    For the last few weeks my PC (pretty old P4 with WinXP SP3) has been crashing randomly. It just suddenly reboots instanteneously. It feels hardware-related but I wasn't able to determine wether it's software or hardware that causes it. I did notice a pattern though: it's more likely to crash when I copy a lot of files over network or have uTorrent running, but sometimes it crashes when I am not doing anything with it. Copying files from it over network causes it to crash in 1 to 10 minutes almost every time. Using torrents causes it to crash every 1-3 hours. With neither or that on it crashes every 24 hours or so. I ruled out the following probable causes: PSU (I bought a new one and turned off most of the drives so the power is sufficient 100%) Bad HDD or interface cable on my SATA disk from which I was originally copying the data over network (bought new SATA cable and later yanked out the HDD completely, PC still crashes without it) Video adapter (AGP slot is now empty, using the onboard VGA at the moment) Network adapter (removed it from PCI, using onboard LAN) CPU (I think: I changed the termopaste and it's temperature is below 50C) RAM (I think: I ran Memtest86 and it didn't show any errors) At the moment I only have only one system HDD and DVD drives, a mouse and a keyboard plugged in. The fact that it crashes most often when I use network extensively makes me think that maybe it's software related (I removed the network adapter from PCI and now am using an onboard one, so network hardware is unlikely to cause problems). I am now pondering system reinstall but it's not a pleasant solution so I decided to ask wether there are better ideas first. If someone can share a good diagnostic tool it would be great because I didn't find anything good. Thanks in advance, I hope that "help to diagnose" questions aren't entirely banned here. EDIT: Motherboard is actually ~4 years old as I replaced it back in 2007

    Read the article

  • Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

    - by tonyrogerson
    This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    Hello. I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so I reset the machine. There must be a way round this. Any help to set up a dual head config for Ubuntu using Config #1 would be hugely appreciated. TIA, Mike

    Read the article

  • Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

    - by mejpark
    I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

    Read the article

  • Three native monitors on Dell OptiPlex 9010

    - by matthewk
    http://www.dell.com/uk/business/p/optiplex-9010/pd says: Configure your workspace the way you want it with support for up to three native monitors via DP/DP/VGA ports. So I ordered one, and have connected three monitors, but I can only enable two at a time. It can be both of the ones connected by DisplayPort, or one of the ones connected by DisplayPort and the one connected by VGA. Does anyone know whether it really is possible to enable all three at once, and if so, how?

    Read the article

  • Attach radeon driver to specific PCI devices?

    - by genpfault
    I have two Radeon cards in this machine, a 6570 and a 6950: lspci | grep VGA: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Turks [Radeon HD 6570] 02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Cayman PRO [Radeon HD 6950] I'm trying to get VGA passthrough to work with KVM on Debian Wheezy, passing through the 6950 as a secondary video card to a Windows 7 guest. This works fine if I blacklist the radeon kernel module via /etc/modprobe.d/. If I remove the blacklist to run X11 (or even just a KMS console) on the 6570 the radeon module seems to attach to both cards: dmesg | egrep "01:00.0|02:00.0|radeon": pci 0000:01:00.0: [1002:6759] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xf7e20000-0xf7e3ffff 64bit] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] pci 0000:01:00.0: reg 30: [mem 0xf7e00000-0xf7e1ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:02:00.0: [1002:6719] type 0 class 0x000300 pci 0000:02:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 18: [mem 0xf7d20000-0xf7d3ffff 64bit] pci 0000:02:00.0: reg 20: [io 0xd000-0xd0ff] pci 0000:02:00.0: reg 30: [mem 0xf7d00000-0xf7d1ffff pref] pci 0000:02:00.0: supports D1 D2 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none vgaarb: bridge control possible 0000:02:00.0 vgaarb: bridge control possible 0000:01:00.0 pci 0000:01:00.0: Boot video device [drm] radeon kernel modesetting enabled. radeon 0000:01:00.0: setting latency timer to 64 radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF [drm] radeon: 1024M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:01:00.0: irq 46 for MSI/MSI-X radeon 0000:01:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:01:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fbcon: radeondrmfb (fb0) is primary device fb0: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 radeon 0000:02:00.0: enabling device (0000 -> 0003) radeon 0000:02:00.0: setting latency timer to 64 radeon 0000:02:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) radeon 0000:02:00.0: GTT: 512M 0x0000000080000000 - 0x000000009FFFFFFF [drm] radeon: 2048M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. radeon 0000:02:00.0: irq 49 for MSI/MSI-X radeon 0000:02:00.0: radeon: using MSI. [drm] radeon: irq initialized. radeon 0000:02:00.0: WB enabled [drm] radeon: ib pool ready. [drm] radeon: power management initialized fb1: radeondrmfb frame buffer device [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 1 [drm] radeon: finishing device. radeon 0000:02:00.0: ffff88041a941800 unpin not necessary [drm] radeon: ttm finalized pci-stub 0000:02:00.0: claimed by stub pci-stub 0000:02:00.0: irq 49 for MSI/MSI-X This causes the Win7 VM to bluescreen on boot. How can I configure things so that the radeon module only attaches to the 6570 and not the 6950?

    Read the article

  • Installing Video Card Driver on Ubuntu in VMware Workstation ?

    - by Mohammad
    I'm using VMware® Workstation v7.0.1 build-227600, I've installed it on my Win7 x64 I've installed Ubuntu 9.10 on VMware Whenever I've posted lspci | grep VGA in Ubuntu's Terminal the following info has showed : 00:0f.0 VGA compatible controller: VMware SVGA II Adapter Now , I'm gonna use Ubuntu Visual Effect, so I have to install Video Card Driver. Is it possible to install Video Card Driver in Ubuntu this situation ? BTW, My video card is NVIDIA GeForce 8600 GT

    Read the article

  • Does a laptop with a GPU also use IGP?

    - by blee
    I have a Thinkpad T60 with dual screen setup: The laptop's LCD: Is normal looking. VGA external monitor: Looks "wavy," but I hooked it up to another computer and it looked fine. Does this imply my GPU is connected to the VGA-out and the built-in LCD is driven by IGP? Is this typically how a laptop with one GPU works? Thanks.

    Read the article

  • Can't get decent refresh rate on crt connected to dvi

    - by Ernst
    Hi, I have a CRT connected to a dvi connector on a videocard using a vga cable and a dvi to vga adapter. Now I cannot set the refresh rate to anything decent (only 60Hz and lower). I've hat this happen using different CRT's, graphics cards (although all ATI, both agp and pcie), and operating systems (both linux and windows). Any idea on how to solve this, maybe some bios setting? Thanks

    Read the article

  • How to make a boot profile permanent?

    - by Usman Ajmal
    Hi, I have a Finnix live CD. I can customize it by remastering it. When I boot with the live CD I need to make a little change in the boot profile The boot profile before making the changes is linux apm=power-off vga=791 initrd=minirt quiet The boot profile after making the change become linux apm=power-off vga=791 initrd=minirt quiet root=/dev/sr0 Now, I need to make this change (adding root=/dev/sr0) permanent. How can I do that?

    Read the article

  • Windows 8 redraw/repaint issues

    - by obuolys
    This is what happens when I scroll a window (click for full-size versions): It can happen in any application, even in Chrome. My computer's specs: ASUS p8z77-v motherboard Intel Core-i7 3770k Intel HD Graphics 4000 integrated VGA Windows 8 Pro x64 I have tried to reinstall VGA drivers, tried to install an older driver from intel.com or asus.com, but no success with resolving the issue. Currently I am using driver version 2867. How can I fix this?

    Read the article

  • Not getting native resolution of external monitor in Ubuntu

    - by darthvader
    Since there us a defect in my laptop screen, I am using an external Dell 1600x1000 monitor. Windows was recognizing the native resolution correctly. But when I installed Ubuntu 10.10, I get only up to 1024x768 in the Monitor preferences. I had a look at this and tried to add resolution by running xrandr --addmode VGA 1600×1000 but I am getting the error xrandr: cannot find output "VGA" What is the way out.

    Read the article

  • Correct Display configuration. Errors while trying to arrange displays

    - by David Russell Parrish Bojrquez
    I am trying to set up my tv with my laptop trough a VGA cable. The display application in Ubuntu throws a lot of errors to me and I have given up in trying to do it myself. I try to apply the 1920 1080 display. The selected configuration for displays could not be applied Requested size (3200, 1080) exceeds 3D hardware limit (2048, 2048). You must either rearrange the displays so that they fit within a (2048, 2048) square or select the Ubuntu 2D session at login. And Also this: Failed to apply configuration: %s GDBus.Error:org.gtk.GDBus.UnmappedGError.Quark._gnome_2drr_2derror_2dquark.Code3: Requested size (3200, 1080) exceeds 3D hardware limit (2048, 2048). You must either rearrange the displays so that they fit within a (2048, 2048) square or select the Ubuntu 2D session at login. Please Help. @Leozitop No I don't see anything when connected to 1920 1080 because the setup fails before actually applying. Yes there are other resolutions which do work. I believe the problem has something to do with the rotation it is set up. My Ubuntu Display application has only clockwise and counterclockwise options for the TV display. I really don't know why this is happening. Basic procedure: Plug in cable, did not get the resolution I wanted. Changed settings, applied them. Re-peat until desired display is shown. I'm not a computer illiterate, really it baffles me that this is happening. Output of xrandr: david@LapUbuntu:~$ xrandr Screen 0: minimum 320 x 200, current 1880 x 800, maximum 4096 x 4096 LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm 1280x800 60.0*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 600x800+1280+0 left (normal left inverted right x axis y axis) 1600mm x 900mm 1920x1080 60.0 + 1280x1024 60.0 1360x768 60.0 1280x720 60.0 1024x768 60.0 800x600 60.3* 640x480 60.0 TV1 unknown connection (normal left inverted right x axis y axis) 848x480 59.9 + 640x480 59.9 + 1024x768 59.9 800x600 59.9 Note that VGA says left and indeed it is, but no other option was available in the display. Also, note the TV1 unknown connection which I have no idea what it is. Note, also, that this has nothing to do with the display since W7 on the computer works fine and since while boot up, and also, before starting session in ubuntu the rotation is normal. I'll also mention that I HAVE re-installed Ubuntu since I had posted this question from a Live CD of 12.04 LTS. And that before the posting of the question also using 12.04 before another backup that I had to do, the VGA setup was fine without any problems.

    Read the article

  • On VirtualBox Guest OS “Could not initialize GLX"

    - by trivelt
    I have a remote build-machine with Jenkins and I'm trying to run GUI application. In Jenkins I installed Xvnc plugin, which uses TightVNC Server, but each build has failed. Earlier, there was a problem with loading driver swrast (by libGL), currently in the log there is this line: [Error] Could not initialize GLX Remote desktop is Ubuntu 14.04 running over VirtualBox, so I installed VBoxAddons but it didn't resolve the problem. Below I'm putting some logs, maybe helpful for you. $ cat /var/log/Xorg.0.log | grep GL [ 20.545] (==) AIGLX enabled [ 20.545] Loading extension GLX [ 20.913] (EE) AIGLX error: vboxvideo does not export required DRI extension [ 20.914] (EE) AIGLX: reverting to software rendering [ 21.615] (II) AIGLX: Loaded and initialized swrast [ 21.615] (II) GLX: Initialized DRISWRAST GL provider for screen 0 $ lsmod | grep box vboxsf 43786 0 vboxpci 23194 0 vboxnetadp 25670 0 vboxnetflt 27613 0 vboxdrv 339502 3 vboxnetadp,vboxnetflt,vboxpci vboxvideo 12658 0 vboxguest 248441 3 vboxsf drm 302817 1 vboxvideo $ lspci | grep VGA 00:02.0 VGA compatible controller: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter Any ideas what should I do?

    Read the article

  • HDMI with Intel Mobile 4 Graphics Controller

    - by roel
    When connecting my TV over HDMI, it shows up in display settings and xrandr: Aspire1825PTZ:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Aspire1825PTZ:~$ xrandr Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected (normal left inverted right x axis y axis) 720x576 50.0 720x480 59.9 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) DP3 disconnected (normal left inverted right x axis y axis) TV1 disconnected (normal left inverted right x axis y axis) However, the resolution is way too low and the screen remains black. Everything works fine in Windows, but I'd rather not reboot just to watch a film... Could anyone help me please?

    Read the article

  • Unity very slow while Gnome Classic running just fine

    - by Sorin Sbarnea
    I see tons of people complaining about Unity speed and I think the problem is not with the video drivers. When I login to Gnome Classic the system is behaving just fine, but when on Unity I can barely do use it: windows are moved hard, terminal is damn slow. Is there any solution or bug that I should track? Details Ubuntu 11.10 Two monitors setup Latest Nvidia proprietary drivers (tested with default ones also, no change) 6GB RAM, Xeon @ 2.8 Nvidia Driver 280.13 - Quadro NVS 295 with 8 cores 256MB RAM. lspci | grep VGA 02:00.0 VGA compatible controller: nVidia Corporation G98 [Quadro NVS 295] (rev a1) uname -a Linux sorins 3.0.0-16-generic #29-Ubuntu SMP Tue Feb 14 12:48:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

    Read the article

  • HP EliteBook 8440p screen flickers after blank screen (nvidia)

    - by fliegenderfrosch
    When my screen turns blank after 10 min or after locking the screen and I begin using the laptop again, the screen is flickering. It looks as if every second line of pixels is blinking and the flickering is mainly present in the upper part of the screen. I am using Ubuntu 12.04 with the latest binary Nvidia drivers (current-updates). lshw | grep VGA tells me: 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [NVS 3100M] (rev a2) The problem doesn’t occur after sleeping or on an external display. I used Kubuntu 11.10 before, where the problem didn’t occur either. Is there anything I can do except waiting for new drivers?

    Read the article

  • HD flash video lagging on LG R400

    - by dhojgaard
    I'm installing Ubuntu on my friends laptop. An LG R400 with ATI Mobility Radeon X2300 graphics drivers. On Windows Vista which runs pretty slow the HD flash videos 1080p on Youtube vimeo and other places work with no problems, but on Ubuntu i can not really play videos above 480p Above that they are lagging. That annoys me because i know he will use them, and how am i supposed to convince him that Ubuntu is the way to go if it can not play the videos that windows vista can? Unity 3d is working fine so i think the graphics drivers is working, and when i download the hd videos and play as mp4 in vlc they also work fine. lspci -nn | grep VGA shows the following: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Mobility Radeon X2300 Hope that someone can help me convince my friend that Ubuntu is rocking!

    Read the article

  • Intel graphics Ubuntu 12.04.3 LTS: does not detect second monitor

    - by user206551
    I have some problems to get the second monitor working on my Ubuntu 12.04.3 LTS. If I click on the detect button it does not work. Info about my system: $uname -a Linux LabTop2 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:22:28 UTC 2013 i686 i686 i386 GNU/Linux $cat /etc/*-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.3 LTS" NAME="Ubuntu" VERSION="12.04.3 LTS, Precise Pangolin" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu precise (12.04.3 LTS)" VERSION_ID="12.04" $lspci |grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) $lsmod | grep video uvcvideo 72250 0 videobuf2_core 39385 1 uvcvideo videodev 96131 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12920 1 uvcvideo videobuf2_memops 13042 1 videobuf2_vmalloc video 19116 1 i915 $xrandr -q xrandr: Failed to get size of gamma for output default Screen 0: minimum 1366 x 768, current 1368 x 768, maximum 1368 x 768 default connected 1368x768+0+0 0mm x 0mm 1366x768 0.0 1368x768 0.0* Before upgrading the system, xrand -q showed my much more resolution options and the other monitor. I have tried to install intel-linux-graphics-installer but this version of ubuntu is not supported Any help will be apreciated!!

    Read the article

  • How do I change my resolution to 1600*900 for a wide screen monitor?

    - by Madhu
    How do I change my resolution to 1600*900 for a wide screen monitor in Oneiric? My Hardware configuration is as below: madhu@madhu-Home:~$ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge) 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02) 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 00:1f.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10) madhu@madhu-Home:~$ cat /etc/X11/xorg.conf

    Read the article

  • How can I set a second screen (DISPLAY=:0.1) as the default gnome display?

    - by Pedro Silva
    Due to various reasons, I have my main monitor set as the secondary display in xorg.conf. I would like to have gnome initialize metacity, gnome-panel as running primarily on :0.1, instead of :0.0. Is this possible at all? To clarify, this is a laptop with its LCD turned off. My main monitor is connected to the VGA out and is driven by the nouveau driver for NVIDIA; a secondary monitor is on a displaylink usb-vga donverter. The seconday monitor is set in xorg.conf as the primary display (no way around it). I can do things like DISPLAY=:0.1 gnome-terminal to run applications on the main monitor. My question is whether it is possible to do this (GNOME-) system-wide.

    Read the article

  • Beginner Geek: How to Use Multiple Monitors to Be More Productive

    - by Chris Hoffman
    Many people swear by multiple monitors, whether they’re geeks or just people who need to be productive. Why use just one monitor when you can use two or more and see more at once? Additional monitors allow you to expand your desktop, getting more screen real estate for your open programs. Windows makes it very easy to set up additional monitors, and your computer probably has the necessary ports. Why Use Multiple Monitors? Multiple monitors give you more screen real estate. Hook up multiple monitors to a computer and you can move your mouse back and forth between them, dragging programs between monitors as if you had an extra-large desktop. People who swear by multiple monitors use them to display multiple things on-screen at a time. Rather than Alt+Tabbing and task switching to glance at another window, you can just look over with your eyes and then look back to the program you’re using. Some examples of use cases for multiple monitors include: Coders who want to view their code on one display with the other display reserved for documentation. They can just glance over at the documentation and look back at their primary workspace. Anyone who needs to view something while working. Viewing a web page while writing an email, viewing another document while writing an something, or working with two large spreadsheets and having both visible at once. People who need to keep an eye on information, whether it’s email or up-to-date statistics, while working. Gamers who want to see more of the game world, extending the game across multiple displays. Geeks who just want to watch a video on one screen while doing something else on the other screen. Hooking Up Multiple Monitors Hooking up an additional monitor to your computer should be very simple. Most new computers come with more than one port for a monitor — whether DVI, HDMI, the older VGA port, or a mix. Some computers may include splitter cables that allow you to connect multiple monitors to a single port. Most laptops also come with ports that allow you to hook up an external monitor. Plug a monitor into your laptop’s DVI or VGA port and Windows will allow you to use both your laptop’s integrated display and the external monitor at once. This all depends on the ports your computer has and how your monitor connects. If you have an old VGA monitor lying around and you have a modern laptop with only DVI or HDMI connectors, you may need an adapter that allows you to plug your monitor’s VGA cable into the new port. Be sure to take your computer’s ports into account before you get another monitor for it. Managing Multiple Monitors With Windows Windows makes using multiple monitors easy. Just plug the monitor into the appropriate port on your computer and Windows should automatically extend your desktop onto it. You can now just drag and drop windows between monitors. To control how this works, right-click your Windows desktop and select Screen resolution. Choose an option from the Multiple displays box. The Extend option extends your desktop onto an additional monitor, while the other options are mainly useful if you’re using an additional monitor for presentations — for example, you could mirror your laptop’s desktop onto a large monitor or blank your laptop’s screen while it’s connected to a larger display. Be sure to arrange your monitors properly so Windows understands how your monitors are physically positioned. Windows 8 allows you to extend your Windows taskbar across multiple monitors. You’ll find this option in the taskbar’s options window — right-click the taskbar and select Properties. You can also choose where you want Windows to display taskbar buttons for open programs — on any monitor’s taskbar or only on the taskbar on the associated monitor. Windows 7 doesn’t have these convenient features built-in — your second monitor won’t have a taskbar. To extend your taskbar onto an additional monitor, you’ll need a third-party utility like the free and open-source Dual Monitor Taskbar. If you just have a single monitor, you can also use the Aero Snap feature to quickly place multiple Windows applications side by side. On Windows 7 or 8, press Windows Key + Left or Windows Key + Right to make the current window take up the left or right half of your display. You could also drag any window’s title bar to the left or right edges of your screen and release the window. How useful this feature is depends on your monitor’s size and resolution. If you have a large, high-resolution monitor, it will allow you to see a lot. If you have a smaller laptop monitor with the seemingly standard 1366×768 resolution, you won’t be able to see much of each snapped window at once, so snapping windows may not be practical. Image Credit: Chance Reecher on Flickr, Camp Atterbury Joint Maneuver Training Center on Flickr, Xavier Caballe on Flickr     

    Read the article

  • Triple monitor setup with an ATI Radeon 4200?

    - by Ben Clapp
    I have a relatively new Powerspec computer (i5 quad core processor, about a year or two old) and just grabbed a new relatively inexpensive ($40?) graphics card. It has 1 DVI, one VGA, and one HDMI output. I have two (different type) monitors plugged into the DVI and VGA slots, and they work great. However, I cannot seem to be able to get a third monitor in the HDMI slot to work. I can see the monitor (and monitor info) show up in display settings. However, if I try to switch the monitor to 'on' and click apply, nothing happens. Anyone have the slightest idea what the problem might be? (It's a Radeon graphics card FYI; if I remember right I think it was the Radeon 4200?)

    Read the article

  • installing my Graphic Card on ubuntu12.04

    - by lamouchi amine
    I have a HP Pavillion G6 series 1225, i5 laptop with Radeon HD 6470M switchable VGA. i installed Ubuntu 12.04 LTS but the VGA drivers don't work properly. I want to install drivers into the Ubuntu. But when I do it arrived error message like this: sorry, installation of this driver failed. Please have a look at the log file for details: /var/log/jockey.log I found a solution in a link: http://ubuntuforums.org/showthread.php?t=1930450 It works for a few steps and then in the installation of the package of the AMD driver, a message pops up 'fatal error' and it redirects me to Ask Ubuntu to find a solution, please help me, I need to make it work.

    Read the article

< Previous Page | 9 10 11 12 13 14 15 16 17 18 19 20  | Next Page >