Search Results

Search found 1002 results on 41 pages for 'phones'.

Page 14/41 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Linux DHCPD Mac-Address based Groups

    - by GruffTech
    Our Current DHCPD.conf looks like the following. subnet 10.0.32.0 netmask 255.255.255.0 { range 10.0.32.100 10.0.32.254; option subnet-mask 255.255.255.0; option broadcast-address 10.0.32.255; option domain-name-servers 208.67.222.222,208.67.220.220; option routers 10.0.32.5; host Dev-ABaird-W { hardware ethernet 00:1D:09:3E:49:13; fixed-address 10.0.32.94; } ... more static hosts .... } About as basic as it gets. The old router is 10.0.32.1, our company wanted to implement a squid proxy to better monitor web traffic while at work, and if necessary block large time-wasters, IE Facebook.com. However, we've quickly realized that this change has played a mean prank on our Polycom SIP Phones. Occasionally our phones will not ring, the end recipient hears ringing (this is artificially created by our PBX) however the handset never rings. The ONLY thing that has changed in our network is the option routers line. So, Since all Polycom MAC addresses begin with 00:04:F2 would it be possible in DHCP to say any 00:04:F2:::* MAC addresses get option routers 10.0.32.1, and anything else must talk with our Gateway?

    Read the article

  • How do I specify the emergency location in CDP?

    - by chrish
    In the LLDP-MED and Cisco Discovery Protocol whitepaper, it compares LLDP-MED and CDP. The part I am interested in is emergency location configuration. In LLDP-MED, I can specify the Emergency Line Indentification Number (ELIN) and that number will be used by some IP Phones (e.g. Aastra) when placing emergency calls. The whitepaper states: Location Identification Discovery This capability is important because it normally provides location information from the switch to the phone. (If the phone is configured with location information or can determine its location, then it may send this information to the switch. However, the real value is getting this information from the switch to the phone for phones that cannot determine their own location.) Location identification discovery allows the phone to be aware of its location-information that can be used for location-based applications on the phone. More importantly, this capability can be used to provide location information when making emergency calls. Both Cisco Discovery Protocol and LLDP-MED support the transportation of location information. However, LLDP-MED has more supported data formats than Cisco Discovery Protocol. I have found the documentation on how to set the location and associate the location to the interfaces for LLDP-MED. How is this done for CDP? Is ELIN supported for CDP?

    Read the article

  • How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

    - by Maharshi Raval
        I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

    Read the article

  • How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

    - by Maharshi Raval
        I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

    Read the article

  • Wifi Works with Android and Windows 8 but not Linux and Win 7

    - by eramm
    Support has told me that our company wide wifi network is setup to support mobile phones only. However it doesn't make sense to me that they can identify a mobile device rather they have setup the Access Point to use a protocol that is only supported on Android and Windows phones. Because the Access Point supports Windows mobile this means that laptops running Windows 8 can also connect to the Access Point (proven). So it stands to reason that since Android is based on Linux there must be a way to connect using Linux as well. iwlist shows IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : 802.1x WIreshark seems to show that a connection is being made to a website to get a certificate and use a Domain Controller for authentication. Questions: 1) what protocol could they be using that is supported on Win Mobile and Android but not on Win 7 and Linux (Debian) ? 2) what tools can I use to help me discover what protocol i need to support ? I have used iwlist and wireshark but I was not able to glean to much useful information from them. I can post the results if needed. 3) is there an app i can use on my Android phone to help me understand what kind of network it is connecting to ? I can provide more information if you tell me how to get it. I just don't know what I am looking for.

    Read the article

  • Cisco Call Manager adding 7945's

    - by Will
    Hello we currently have a call manager settup (older we are working on upgrading it) but for now we are looking to add 7945 IP phones. We currently have 7960's all over the place, but we can't get these new anymore. Here is the info about our call manager ace.dll 5.2.5.0 CCM4.1(3) aced.dll CCM4.1(3) AdministrativeReportingTool.exe 4.1(0.45) 4.1(3)sr4d Apache Tomcat 4.1 CCM4.1(3) ASTIsapi.dll 3.3.2.0 4.1(3)sr4d AudioTranslator.exe 4.0.0.3 CCM4.1(3) Aupair.exe 4.1.3.10472 4.1(3)sr4d AupairChangeNotify.dll 4.1.0.11 CCM4.1(3) AuthFilt.dll 4.0.0.0 4.1(3)sr4d AVVIDCustomerDirectoryConfigurationPlugin.exe 4.1.0.17(0) CCM4.1(3) bootp.exe 2.0.2.2 CCM4.1(3) BulkAdministrationTool.exe 5.1(4c) 4.1(3)sr4d CallBackService.exe 3.3.2.3 4.1(3)sr4d ccm.exe 4.1.3.17472 4.1(3)sr4d CcmPerfMon.dll 4.1(3)sr4d CCNTEST.EXE CCM4.1(3) cdpintf.dll 4.0.0.0 CCM4.1(3) Cisco CallManager 4.1(3)sr4d 4.1(3)sr4d One of the admins recommenced downloading a device pack, which we did. However when we ran it on the call manager server it gave the error "unable to read script" Any recommendations on how to get these phones working with our Call Manager? Thank you.

    Read the article

  • VOIP and internet connection speeds [cable vs. fiber]

    - by microchasm
    Our office is migrating to IP telephony. We have less than 10 employees that will be using the phones. We currently have cable internet, and they just bumped the speeds: There is a data center that was just recently built in our building, and we were considering co-lo'ing there in the near future. As a result, they offered us access to their triple-redundant internet, but it's quite expensive. They are offering 3mbps committed with up to 10mbps burst for $250/month (discounted). We pay ~$120 for our cable (which the plan was to keep--at least for TV). I want the phone system and LAN to be as separate as possible. Was thinking about keeping the cable for LAN, and using the other connection for the phones (until I saw the price). Now I'm thinking it might make sense to add on to our existing cable setup, and change our phone to only have DSL as a backup for the cable. Is there any real benefit to the fiber? Especially for the price? Any other suggestions or ideas? Thanks.

    Read the article

  • CodePlex Daily Summary for Monday, October 22, 2012

    CodePlex Daily Summary for Monday, October 22, 2012Popular ReleasesSQLLib: Alpha release 17: Added CLR UDFs: * clr.fn_regex_instr - similar to Oracle REGEX_INSTR * clr.fn_regex_substr - similar to Oracle REGEX_SUBSTR To deploy CLR objects copy ClrAgg.dll and ClrRegEx.dll to a folder of you choice (currently deployment script points to C:\Program Files\Microsoft SQL Server\100\CLR\ClrAgg.dll) and execute deployment scripts InstallCLRAggregates.sql and InstallCLRRegEx.sql Thank you for rating the download and/or your feedback.EPiServer CMS ElencySolutions.MultipleProperty: ElencySolutions.MultipleProperty v1.6.3: The ElencySolutions.MulitpleProperty property controls have been developed by Lee Crowe a technical developer at Fortune Cookie (London). Installation notes The property copy page can be locked down by adding the following location element, the path of this will be different depending on whether you use the embedded or non embedded resource version. When installing the nuget package these will be added automatically, examples below: Embedded: <location path="util/ElencySolutionsMultipleP...Fiskalizacija za developere: FiskalizacijaDev 1.1: Ovo je prva nadogradnja ovog projekta nakon inicijalnog predstavljanja - dodali smo nekoliko feature-a, bilo zato što smo sami primijetili da bi ih bilo dobro dodati, bilo na osnovu vaših sugestija - hvala svima koji su se ukljucili :) Ovo su stvari riješene u v1.1.: 1. Bilo bi dobro da se XML dokument koji se šalje u CIS može snimiti u datoteku (http://fiskalizacija.codeplex.com/workitem/612) 2. Podrška za COM DLL (VB6) (http://fiskalizacija.codeplex.com/workitem/613) 3. Podrška za DOS (unu...MCEBuddy 2.x: MCEBuddy 2.3.4: Changelog for 2.3.4 (32bit and 64bit) 1. Fixed a bug introduced in 2.3.3 that would cause HD recordings and recordings with multiple audio channels to fail. 2. Updated <encoder-unsupported> option to compare with all Audio tracks for videos with multiple audio tracks. 3. Fixed a bug with SRT and EDL files, when input and output directory are the same the files are not preserved.BlogEngine.NET: BlogEngine.NET 2.7 RC: Cheap ASP.NET Hosting - $4.95/Month - Click Here!! Click Here for More Info Cheap ASP.NET Hosting - $4.95/Month - Click Here! dot This is a Release Candidate version for BlogEngine.NET 2.7. The most current, stable version of BlogEngine.NET is version 2.6. Find out more about the BlogEngine.NET 2.7 RC here. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.7 instructions...Pulse: Pulse 0.6.3.0: Fixed a number of bugs that showed up since my update yesterday. Fixes included are for: - Weird issue where the initial "Nature" wallbase.cc search would duplicate itself - After changing a providers settings it wouldn't take affect until you restarted Pulse (removing or adding a provider entirely did take effect though) - Another small issue with the regex for the wallbase.cc wallpapers that I tweaked yesterday, seems good now though.Liberty: v3.4.0.0 Release 20th October 2012: Change Log -Added -Halo 4 support (invincibility, ammo editing) -Reach A warning dialog now shows up when you first attempt to swap a weapon -Fixed -A few minor bugsDoctor Reg: Doctor Reg V1.0: Doctor Reg V1.0 PT-PTkv: kv 1.0: if it were any more stable it would be a barn.LINQ for C++: cpplinq-20121020: LINQ for C++ is an attempt to bring LINQ-like list manipulation to C++11. This release includes just the source code. What's new in this release: join range operators: Inner Joins two ranges using a key selector reverse range operator distinct range operator union_with range operator intersect_with range operator except range operator concat range operator sequence_equal range aggregator to_lookup range aggregator This is a sample on how to use cpplinq: #include "cpplinq.h...helferlein_Form: 02.03.05: Requirements.Net 4.0 DotNetNuke 05.06.07 or higher, maybe it works with lower versions, but I developed it on this one and tested it on DotNetNuke 06.02.00 as well helferlein_BabelFish version 01.01.03 - please upgrade this first! Issues fixed Fixed issue with all users from all portals are listed as Host users in the sender options (E-Mail Options - Sender - ALL Users Listed) Registered postback-button for Excel-Export on Form submission edit control Changed behaviour Due to some mis...ClosedXML - The easy way to OpenXML: ClosedXML 0.68.1: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Orchard Project: Orchard 1.6 RC: RELEASE NOTES This is the Release Candidate version of Orchard 1.6. You should use this version to prepare your current developments to the upcoming final release, and report problems. Please read our release notes for Orchard 1.6 RC: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you wil...Rawr: Rawr 5.0.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature (for Professional and Entreprise Editions) UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring release of a nugget package to help developers speed up development http://nuget.org/packages/Magelia.Webstore.Client optimization of the data update mechanism (a.k.a. "burst") Performance improvment of the d...New ProjectsAdvanced Systems Generator: A very advanced systems generator in the first phase...planning. Android Phones: Creating Web 2.0 site featuring different types of Android phone where Users and fun of the phones can rate, evaluate and comment on different android phonesAppFabpraisal: AppFabPraisal is a project containing Concept Work around Health Monitoring in AppFabric.ASP.NET Web 2.0 Proje: this is a testAssignment1: This is a simple project allow users to sum two numbersBarryKileyiRobotics: The irobotics websiteBI Loteria: BI de jogos de loteria e lotofacil, para maximizar o numero de acerto em logos desse tipo.BKileyiRoboticsA1: iRobotics BlipiNET: Dostepowa biblioteka .NET do funkcjonalnosci API serwisu Blipi.plCAPRSFinal: Subversion, pruebas unitarias, etc.CityON: l' applicazione fornirà servizi informativi e supporterà l' utente nella pianificazione delle attivitàCryptographer: Cryptographer is a simple encryption/decryption application written in C# WinForms. It allows encryption and decryption using MD5, Rijndael, XOR and Hex.Design Patterns at TUM: Implement and provide the set of design patters in the area of software engineering. DigitalCV: DigitalCV is an API and editor for creating digital curriculum vitaes.Energy Informatics: The idea of this project is to follow a research in the area of energy informatics where we can provide value from the computer science.Ficharts.Net: ??Ficharts?Asp.Net????FlakerNET: Dostepowa biblioteka .NET do funkcjonalnosci API serwisu Flaker.plgillsassignment2: This is my second assignment which has 2 aspx pages.Image Space Occlusion Culling Engine: ISOCE is an Image Space Occlusion Culling Engine optimized to perform occlusion culling in CPU. Developed in C++ using SIMD optimizations.Liubaobao File Manager: A web based file managernetception: netception is an error tracking system aimed at enterprise environments. it aims to build on existing logging projects with business related informationPhoneGap MVC: Demo MVC application using PhoneGapProjetoIntegrador: Projeto Integrador para PUCPR Londrina.Quicklight: The Quicklight project that allows a developer to write anything from Rich Internet Applications to Apps for mobile phones using C# and HTML based Razor viewsRarawel: Crawl website with custom URIs and grab contentSharePoint Online Helper Library: Use .NET code or PowerShell to automate SharePoint Online deployment tasks, such as authenticating without browser, and activate sandbox solutions.SharkCrawler: SharkCrawler is a simple web page crawler written in C# for demonstration of how regular crawler is working.Shin Warrior Players Union: This is a ASP.NET Web 2.0 Project for WSCC coursework.Simple Servers Monitor: Monitor Servers via simple and yet comprehensive interface. Test Hgsubversion: For Testing hgsubversion.Visualizador de escandallos: Visualizador recursivo de estructuras tipo arbol para escandallos de producción.WebscriptingAssignment: sum of two numbersWrapCode - Template: WrapCode.com Custom WordPress template.XMLCatalogueTemplate(C#): MSP????????????????????????????。 ?????????????????。

    Read the article

  • 5 Ways to Determine Mobile Location

    - by David Dorf
    In my previous post, I mentioned the importance of determining the location of a consumer using their mobile phone.  Retailers can track anonymous mobile phones to determine traffic patterns both inside and outside their stores.  And with consumers' permission, retailers can send location-aware offers to mobile phones; for example, a coupon for cereal as you walk down that aisle.  When paying with Square, your location is matched with the transaction.  So there are lots of reasons for retailers to want to know the location of their customers.  But how is it done? I thought I'd dive a little deeper on that topic and consider the approaches to determining location. 1. Tower Triangulation By comparing the relative signal strength from multiple antenna towers, a general location of a phone can be roughly determined to an accuracy of 200-1000 meters.  The more towers involved, the more accurate the location. 2. GPS Using Global Positioning Satellites is more accurate than using cell towers, but it takes longer to find the satellites, it uses more battery, and it won't well indoors.  For geo-fencing applications, like those provided by Placecast and Digby, cell towers are often used to determine if the consumer is nearing a "fence" then switches to GPS to determine the actual crossing of the fence. 3. WiFi Triangulation WiFi triangulation is usually more accurate than using towers just because there are so many more WiFi access points (i.e. radios in routers) around. The position of each WiFi AP needs to be recorded in a database and used in the calculations, which is what Skyhook has been doing since 2008.  Another advantage to this method is that works well indoors, although it usually requires additional WiFi beacons to get the accuracy down to 5-10 meters.  Companies like ZuluTime, Aisle411, and PointInside have been perfecting this approach for retailers like Meijer, Walgreens, and HomeDepot. Keep in mind that a mobile phone doesn't have to connect to the WiFi network in order for it to be located.  The WiFi radio in the phone only needs to be on.  Even when not connected, WiFi radios talk to each other to prepare for a possible connection. 4. Hybrid Approaches Naturally the most accurate approach is to combine the approaches described above.  The more available data points, the greater the accuracy.  Companies like ShopKick like to add in acoustic triangulation using the phone's microphone, and NearBuy can use video analytics to increase accuracy. 5. Magnetic Fields The latest approach, and this one is really new, takes a page from the animal kingdom.  As you've probably learned from guys like Marlin Perkins, some animals use the Earth's magnetic fields to navigate.  By recording magnetic variations within a store, then matching those readings with ones from a consumer's phone, location can be accurately determined.  At least that's the approach IndoorAtlas is taking, and the science seems to bear out.  It works well indoors, and doesn't require retailers to purchase any additional hardware.  Keep an eye on this one.

    Read the article

  • Top 5 Mobile Apps To Keep Track Of Cricket Scores [ICC World Cup]

    - by Gopinath
    The ICC World Cup 2011 has started with a bang today and the first match between India vs Bangladesh was a cracker. India trashed Bangladesh with a huge margin, thanks to Sehwag for scoring an entertaining 175 runs in 140 runs. At the moment it’s very clear that whole India is gripped with cricket fever and so the rest of fans across the globe. Couple of days ago we blogged about how to watch live streaming of ICC cricket world cup online for free as well as top 10 websites to keep track live scores on your computers. What about tracking live cricket scores on mobiles phones? Here is our guide to top mobile apps available for Symbian(Nokia), Android, iOS and Windows mobiles. By the way, we are covering free apps alone in this post. Why to waste money when free apps are available? SnapTu – Symbian Mobile App SnapTu is a multi feature application that lets you to track live cricket scores, read latest news and check stats published on cric info. SnapTu has tie up with Cric Info and accessing all of CricInfo website on your mobile is very easy. Along with live scores, SnapTu also lets you access your Facebook, Twitter and Picassa on your mobile. This is my favourite application to track cricket on Symbian mobiles. Download SnapTu for your mobiles here Yahoo! Cricket – Symbian & iOS App Yahoo! Cricket Scores is another dedicated application to catch up with live scores and news on your Nokia mobiles and iPhones. This application is developed by Yahoo!, the web giant as well as the official partner of ICC. Features of the app at a glance Cricket: Get a summary page with latest scores, upcoming matches and details of the recent matches News: View sections devoted to the latest news, interviews and photos Statistics: Find the latest team and player stats Download Yahoo! Cricket For Symbian Phones   Download Yahoo! Cricket For iOS ESPN CricInfo – Android and iOS App Is there any site that is better than CricInfo to catch up with latest cricket news and live scores? I say No. ESPN CricInfo is the best website available on the web to get up to the minute  cricket information with in-depth analysis from cricket experts. The live commentary provided by CricInfo site is equally enjoyable as watching live cricket on TV. CricInfo guys have their official applications for Android mobiles and iOS devices and you accessing ball by ball updates on these application is joy. Download ESPN Crick Info App: Android Version, iPhone Version NDTV Cricket – Android, iOS and Blackberry App NDTV Cricket App is developed by NDTV, the most popular English TV news channel in India. This application provides live coverage of international and domestic cricket (Test, ODI & T20) along with latest News, Photos, Videos and Stats. This application is available for iOS devices(iPhones, iPads, iPod Touch), Android mobiles and Blackberry devices. Download NDTV Cricket for iOS here & here    Download NDTV Apps For Rest of OSs ECB Cricket – Symbian, iOS & Android App If you are an UK citizen then  this may be the right application to download for getting live cricket score updates as well as latest news about England Cricket Board. ECB Cricket is an official application of England Cricket Board Download ECB Cricket : Android Version, iPhone Version, Symbian Version Are there any better apps that we missed to feature in this list? This article titled,Top 5 Mobile Apps To Keep Track Of Cricket Scores [ICC World Cup], was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Security and the Mobile Workforce

    - by tobyehatch
    Now that many organizations are moving to the BYOD philosophy (bring your own devices), security for phones and tablets accessing company sensitive information is of paramount importance. I had the pleasure to interview Brian MacDonald, Principal Product Manager for Oracle Business Intelligence (BI) Mobile Products, about this subject, and he shared some wonderful insight about how the Oracle Mobile Security Tool Kit is addressing mobile security and doing some pretty cool things.  With the rapid proliferation of phones and tablets, there is a perception that mobile devices are a security threat to corporate IT, that mobile operating systems are not secure, and that there are simply too many ways to inadvertently provide access to critical analytic data outside the firewall. Every day, I see employees working on mobile devices at the airport, while waiting for their airplanes, and using public WIFI connections at coffee houses and in restaurants. These methods are not typically secure ways to access confidential company data. I asked Brian to explain why. “The native controls for mobile devices and applications are indeed insufficiently secure for corporate deployments of Business Intelligence and most certainly for businesses where data is extremely critical - such as financial services or defense - although it really applies across the board. The traditional approach for accessing data from outside a firewall is using a VPN connection which is not a viable solution for mobile. The problem is that once you open up a VPN connection on your phone or tablet, you are creating an opening for the whole device, for all the software and installed applications. Often the VPN connection by itself provides insufficient encryption – if any – which means that data can be potentially intercepted.” For this reason, most organizations that deploy Business Intelligence data via mobile devices will only do so with some additional level of control. So, how has the industry responded? What are companies doing to address this very real threat? Brian explained that “Mobile Device Management (MDM) and Mobile Application Management (MAM) software vendors have rapidly created solutions for mobile devices that provide a vast array of services for controlling, managing and establishing enterprise mobile usage policies. On the device front, vendors now support full levels of encryption behind the firewall, encrypted local data storage, credential management such as federated single-sign-on as well as remote wipe, geo-fencing and other risk reducing features (should a device be lost or stolen). More importantly, these software vendors have created methods for providing these capabilities on a per application basis, allowing for complete isolation of the application from the mobile operating system. Finally, there are tools which allow the applications themselves to be distributed through enterprise application stores allowing IT organizations to manage who has access to the apps, when updates to the applications will happen, and revoke access after an employee leaves. So even though an employee may be using a personal device, access to company data can be controlled while on or near the company premises. So do the Oracle BI mobile products integrate with the MDM and MAM vendors? Brian explained that our customers use a wide variety of mobile security vendors and may even have more than one in-house. Therefore, Oracle is ensuring that users have a choice and a mechanism for linking together Oracle’s BI offering with their chosen vendor’s secure technology. The Oracle BI Mobile Security Toolkit, which is a version of the Oracle BI Mobile HD application, delivered through the Oracle Technology Network (OTN) in its component parts, helps Oracle users to build their own version of the Mobile HD application, sign it with their own enterprise development certificates, link with their security vendor of choice, then deploy the combined application through whichever means they feel most appropriate, including enterprise application stores.  Brian further explained that Oracle currently supports most of the major mobile security vendors, has close relationships with each, and maintains strong partnerships enabling both Oracle and the vendors to test, update and release a cooperating solution in lock-step. Oracle also ensures that as new versions of the Oracle HD application are made available on the Apple iTunes store, the same version is also immediately made available through the Security Toolkit on OTN.  Rest assured that as our workforce continues down the mobile path, company sensitive information can be secured.  To listen to the entire podcast, click here. To learn more about the Oracle BI Mobile HD, click  here To learn more about the BI Mobile Security Toolkit, click here 

    Read the article

  • Isis Finally Rolls Out

    - by David Dorf
    Google has rolled their wallet out for several chains; I see the NFC readers in Walgreen's when I'm sent their for milk.  But Isis has been relatively quiet until now.  As of last week they have finally launched in their two test cities: Austin, and Salt Lake City.  Below are the supported carriers and phones as of now, but more phones will be added later. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} AT&T supports: HTC One™ X, LG Escape™, Samsung Galaxy Exhilarate™, Samsung Galaxy S® III, Samsung Galaxy Rugby Pro™ T-Mobile supports: Samsung Galaxy S® II, Samsung Galaxy S® III, Samsung Galaxy S® Relay 4G Verizon supports: Droid Incredible 4G LTE. Of course iPhone owners have no wallet since Apple didn't included an NFC chip. To start using Isis, you have to take your NFC-capable phone to your carrier's store to get the SIM replaced with a more sophisticated one that has a secure element configured for Isis.  The "secure element" is the cryptographic logic that secures mobile payments.  Carriers like the secure element in the SIM while non-carriers (like Google) prefer the secure element in the phone's electronics. (I'm not entirely sure if you could support both Isis and Google Wallet on the same phone.  Anybody know?) Then you can download the Isis app from Google Play and load your cards.  Most credit cards are supported, and there's a process to verify the credit cards are valid.  Then you can select from the list of participating retailers to "follow."  Selecting a retailer allows that retailer to give you offers via the app. The app is well done and easy to use.  You can select a default payment type and also switch between them easily.  When the phone is tapped on the reader, there are two exchanges of information.  The payment information is transferred, and then the Isis "SmartTap" information which includes optional loyalty number and digital coupons.  Of course the value of mobile wallets comes from the ease of handling all three data types (i.e. payment, loyalty, offers). There are several advertisements for Isis running now, and my favorite is below.

    Read the article

  • How to Speed Up Any Android Phone By Disabling Animations

    - by Chris Hoffman
    Android phones — and tablets, too — display animations when moving between apps and screens. These animations look very slick, but they waste time — especially on fast phones, which could switch between apps instantly if not for the animations. Disabling these animations will speed up navigating between different apps and interface screens on your phone, saving you time. You can also speed up the animations if you’d rather see them. Access the Developer Options Menu First, we’ll need to access the Developer Options menu. It’s hidden by default so Android users won’t stumble across it unless they’re actually looking for it. To access the Developer Options menu, open the Settings screen, scroll down to the bottom of the list, and tap the About phone or About tablet option. Scroll down to the Build number field and tap it repeatedly. Eventually, you’ll see a message appear saying “You are now a developer!”. The Developer options submenu now appears on the Settings screen. You’ll find it near the bottom of the list, just above the About phone or About tablet option. Disable Interface Animations Open the Developer Options screen and slide the switch at the top of the screen to On. This allows you to change the hidden options on this screen. If you ever want to re-enable the animations and revert your changes, all you have to do is slide the Developer Options switch back to Off. Scroll down to the Drawing section. You’ll find the three options we want here — Window animation scale, Transition animation scale, and Animator duration scale. Tap each option and set it to Animation off to disable the associated animations. If you’d like to speed up the animations without disabling them entirely, select the Animation .5x option instead. If you’re feeling really crazy, you can even select longer animation durations. You can make the animations take as much as ten times longer with the Animation 10x setting. The Animator duration scale option applies to the transition animation that appears when you tap the app drawer button on your home screen.  Your change here won’t take effect immediately — you’ll have to restart Android’s launcher after changing the Animator duration scale setting. To restart Android’s launcher, open the Settings screen, tap Apps, swipe over to the All category, scroll down, and tap the Launcher app. Tap the Force stop button to forcibly close the launcher, then tap your device’s home button to re-launch the launcher. Your app drawer will now open immediately, too. Now whenever you open an app or transition to a new screen, it will pop up as quickly as possible — no waiting for animations and wasting processing power rendering them. How much of a speed improvement you’ll see here depends on your Android device and how fast it is. On our Nexus 4, this change makes many apps appear and become usable instantly if they’re running in the background. If you have a slower device, you may have to wait a moment for apps to be usable. That’s one of the big reasons why Android and other operating systems use animations. Animations help paper over delays that can occur while the operating system loads the app.     

    Read the article

  • Building Enterprise Smartphone App &ndash; Part 1: Why Build Smart Phone Apps

    - by Tim Murphy
    This is part 1 in a series of post based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Intro Most of us already carry smartphones. We play games on them. We keep up with what is going on with our friends and our favorite teams. We take pictures of our kids at their events. But the question is if that is all they are good for. Many companies have aspects of their business that lend themselves to being performed by mobile devices. Some of them lean toward larger device such as tablets, but many can be executed on smartphones. This and the following articles will discuss some of the possible applications of smartphone technology for businesses, the platforms that are available and the considerations you need to make when building them. I'll take a look at some specific scenarios and wrap up with a couple of capabilities that are just emerging that can be used in the future. Why Build Enterprise Smartphone Applications So what are some of the ways that you can leverage smartphone technology to gain efficiency in your business or a clients business. There are a few major areas that I have seen mobile platforms being an advantage to. Your mobile sales force is a key candidate for leveraging smartphone apps.  They can visit clients in their retail location and place orders on site. It is a more personal approach which can gain you customer loyalty.  A sales person may also gather information about the way a client does business or who their target market is. This allows them you to focus marketing information or build customized support for your customer. You may also have need to track physical inventory in a store. This is something that has historically been done with laser scanners, but with the camera capabilities in today's phones and tablets it is possible to use more general multi-purpose devices.  This can save costs on both hardware and telecommunication contracts. Delivery verification is another area that historically has been the domain of specialized devices but can now be accomplished with smartphones.  This also reduces costs because it is also used for communicating with the driver and other operations.  Add to that the navigation capability of smartphones and you can see how the return on investment increases. Executives are always on the go. They spend most of their time in meetings and yet they need access to decision making information at their finger tips. With a smartphone app they can get alerts when major sales are closed or critical accounting process are completed that may need their attention. They can also answer questions by instantly pulling up BI reports. I have often heard operations support people say that they need things like VPN and RDP from their phones. If they can also have notifications of outages or critical support requests they can be react to situations without needing to be tied to their desks. These are all valid reasons to need smartphone applications.  In the next installment I will discuss platforms and features. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

    Read the article

  • How can I install the BlackBerry v5.0.0 component pack into Eclipse?

    - by Dan J
    I'm trying to install the latest v5.0.0 "beta 2" BlackBerry OS Component Pack into Eclipse 3.4.2 with BlackBerry Eclipse plugin v1.0.0.67, but have hit a few problems. Has anybody found an easy way to do this? I had no trouble installing the v4.5.0 and v4.7.0 Component Packs. It's rather strange that BlackBerry are shipping new phones with the v5.0.0 OS installed (e.g. a Storm 2 9550 and Bold 9700 that I just bought), and pushing that update to phones whilst the BlackBerry website still considers the v5.0.0 SDK / Component Packs to be "beta 2"! If anybody knows when an official non-beta Component Pack is going to be released that might solve my problem... In case it helps, the problems I've hit so far are: -Contrary to the implication on the BlackBerry website, the Eclipse "Software Update..." option for the v5.0.0 Component Pack claims it only works on the v1.0.0 Eclipse BlackBerry plugin, not the new v1.1 one. -I then tried to install the v5.0.0 Component Pack through the "Software Updates..." menu in Eclipse using the v1.0.0 Eclipse BlackBery plugin. Once I'd done the 200MB download the install failed with a "Invalid zip file format" error. -I might just have been unlucky with a corrupted download but I did try it twice, once through "Software Updates..." and once by selecting "Archive" to install the downloaded Component Pack (which unlike v4.5.0 and v4.7.0 was a JAR, not a ZIP).

    Read the article

  • Multiple consecutive alerts in Java ME

    - by Casebash
    According to the documentation, Display.setCurrent doesn't work if the current displayable is an alert. Does anyone know how to work around this so that we can go from one alert to another? I am using CLDC 1.0 and MIDP 2.0. My attempt The spec does allow us to edit an alert while it is on screen, but some Nokia phones don't handle it well at all. So I am now trying to go from the alert to a canvas, then back to the alert. Of course I don't want the user to interact with the previous canvas, so it seems that I am forced to create a new blank canvas. As a sidenote, this has the slight disadvantage of looking worse on phones which still have the previous screen when an alert is shown. The bigger problem is how to transition from the blank canvas back to an alert once the canvas is loaded. Testing on the Motorola emulator revealed that showNotify is not called after returning from an alert to the previous screen. I guess I could create the next alert in the paint method, but this seems like a ugly hack.

    Read the article

  • Issue with 'Hello Android' tutorial

    - by Mike Needham
    I am brand new to Eclipse and Android, but somewhat familiar with Java. That having been said, I tried to follow the 'Hello Android' tutorial from the developer site using the latest Eclipse (Galieo) and the 2.1 Android SDK, I am on a Macintosh running Snow Leopard (OS X 10.6). I have a default virtual device (though my target is actually for phones like my own HTC Incredible which has the snapdragon processor and of course all the latest accoutrement in smart phones. Everything seemed to go okay until I went to RUN>RUN and then selected 'Android Application'. My computer spins it's wheels for a while and then I see two errors. I have pasted the output below: [2010-05-04 01:53:46 - HelloAndroid] ------------------------------ [2010-05-04 01:53:46 - HelloAndroid] Android Launch! [2010-05-04 01:53:46 - HelloAndroid] adb is running normally. [2010-05-04 01:53:46 - HelloAndroid] Performing com.example.helloandroid.HelloAndroid activity launch [2010-05-04 01:53:46 - HelloAndroid] Automatic Target Mode: launching new emulator with compatible AVD 'myAVD' [2010-05-04 01:53:46 - HelloAndroid] Launching a new emulator with Virtual Device 'myAVD' [2010-05-04 01:53:58 - HelloAndroid] New emulator found: emulator-5554 [2010-05-04 01:53:58 - HelloAndroid] Waiting for HOME ('android.process.acore') to be launched... [2010-05-04 01:53:59 - Emulator] 2010-05-04 01:53:59.501 emulator[10398:903] Warning once: This application, or a library it uses, is using NSQuickDrawView, which has been deprecated. Apps should cease use of QuickDraw and move to Quartz. [2010-05-04 01:54:23 - HelloAndroid] emulator-5554 disconnected! Cancelling 'com.example.helloandroid.HelloAndroid activity launch'! I never do see the text in the emulator and the emulator crashes with a message about it quitting unexpectedly. The actual code is line by line from the tutorial and I have never been able to get to the XML part yet. I am not sure what is wrong with my environment setup or if it is just an incompatibility with Snow Leopard? I would REALLY appreciate any help in resolving this as I am very interested in developing on this platform. Thank-you, Mike N Lawrence, Kansas

    Read the article

  • What is the proper way to set my drawable directories to support the new Dell Streak without losing support for older devices?

    - by emmby
    This seems to be a widespread problem. I have the following drawable directories: drwxr-xr-x 18 mike staff 612 Feb 4 17:28 drawable/ drwxr-xr-x 51 mike staff 1734 Feb 4 17:32 drawable-nodpi/ drwxr-xr-x 44 mike staff 1496 Feb 4 17:30 drawable-normal-mdpi/ My xml drawable resources are in drawable. My resources intended for the large-mdpi (Dell Streak) and normal-hdpi (Droid, Nexus, Incredible, etc.) are all in drawable-nodpi. My resources for normal-mdpi (older phones like the G1) are in drawable-normal-mdpi. Unfortunately, the normal-hdpi phones like the Droid are pulling their resources from drawable-normal-mdpi instead of from drawable-nodpi. This is likely because of the rules in How Android Finds the Best-matching Resource. So the question is, how do I provide support for large-mdpi devices like the Streak along with normal-hdpi devices like the Droid, as well as normal-mdpi devices like the G1? The simplest solution would probably be to make two copies of my large resources, one in normal-hdpi for the droid and one in large-mdpi for the streak, but i'd like to avoid duplicating all of these resources. Update Per Mayra's suggestion, I could make an alias for every resource. However, there are a lot of resources I'd have to make aliases for, which would make maintenance a nightmare going forward, so I'm hoping for another solution.

    Read the article

  • How to manage a single-selection (exclusive) list?

    - by Andy
    I've got a detail view that consists of a table view with a few rows of data. I can fill the rows just fine, and moving back and forth from the parent view to the subview works too. This detail view should allow the user to select a single value, placing a checkmark accessory in the cell and then returning to the parent view (where the selected value becomes the cell.textLabel.text property of the cell from which the detail view was called). This all works as of right now. However, when the user taps the cell in the parent view to go back to the detail view (to change their selection), my checkmark has disappeared and I cannot for the life of me figure out how to make it stay. Here's my cellForRowAtIndexPath: method: - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:CellIdentifier] autorelease]; } NSString *labelText = [[phones objectAtIndex:indexPath.row] valueForKey:@"phoneNumberLabel"]; cell.textLabel.text = labelText; NSString *currentLabel = [ruleBuilder.tableView cellForRowAtIndexPath:selectedIndexPath].textLabel.text; if (labelText == currentLabel) { cell.accessoryType = UITableViewCellAccessoryCheckmark; } NSString *detailText = [[phones objectAtIndex:indexPath.row] valueForKey:@"phoneNumber"]; cell.detailTextLabel.text = detailText; return cell; } I've checked out Apple's sample code for exclusive-list management in Table View Programming Guide, but the snippet seems incomplete, and I can't find the related code in Apple's sample code. This doesn't seem like it ought to be that hard to do.

    Read the article

  • Add organization details in contact list

    - by Nemat
    Hi Friends..... I have to add organization details in contacts.Here is my code: Uri newPersonUri = null; ContentValues personValues = new ContentValues(); // Add name and get its Uri personValues.put(People.NAME, arrValues[0] + " " + arrValues[1]); personValues.put(People.STARRED, 0); // STARRED 0 = Contacts, 1 = Favorites personValues.put(People.NOTES, arrValues[9]); //add notes newPersonUri = context.getContentResolver().insert(android.provider.Contacts.People.CONTENT_URI, personValues); ContentValues organisationValues = new ContentValues(); Uri orgUri = Uri.withAppendedPath(newPersonUri, android.provider.Contacts.Organizations.CONTENT_DIRECTORY); //Uri orgUri =Uri.withAppendedPath(newPersonUri, "organizations"); organisationValues.clear(); organisationValues.put(Organizations.COMPANY, arrValues[10]); organisationValues.put(Organizations.TITLE, arrValues[11]); organisationValues.put(Organizations.TYPE, Organizations.TYPE_WORK); objContext.getContentResolver().insert(orgUri, organisationValues); It works fine in some phones but in some phones it gives "java.lang.UnsupportedOperationException: Unknown uri: content://contacts/people/201/organizations" What can be the reason..... Any help will be appreciated!!!! Thanks in Advance Nemat

    Read the article

  • How do I send data between two computers over the internet

    - by Johan
    I have been struggling with this for the entire day now, I hope somebody can help me with this. My problem is fairly simple: I wish to transfer data (mostly simple commands) from one PC to another over the internet. I have been able to achieve this using sockets in Java when both computers are connected to my home router. I then connected both computers to the internet using two different mobile phones and attempted to transmit the data again. I used the mobile phones as this provides a direct route to the internet and if I use my router I have to set up port forwarding, at least, that is how I understand it. I think the problem lies in the method that I set up the client socket. I used: Socket kkSocket = new Socket(ipAddress, 3333); where ipAddress is the IP address of the computer running the server. I got the IP address by right-clicking on the connection, status, support. Is that the correct IP address to use or where can I obtain the address of the server? Also, is it possible to get a fixed name for my computer that I can use instead of entering the IP address, as this changes every time I connect to the internet using my mobile phone? Alternatively, are there better methods to solving my problem such as using http, and if so, where can I find more information about this? Thanks!

    Read the article

  • Databinding expression for retrieving value of related collection using LINQ

    - by joshb
    I have a GridView that is bound to a LINQDataSource control that is returning a collection of customers. Within my DataGrid I need to display the home phone number of a customer, if they have one. The phone numbers of a customer are stored in a separate table with a foreign key pointing to the customer table. The following binding expression gets me the first phone number for a customer: <asp:TemplateField HeaderText="LastName" SortExpression="LastName"> <ItemTemplate> <asp:Label ID="PhoneLabel" runat="server" Text='<%# Eval("Phones[0].PhoneNumber") %>'></asp:Label> </ItemTemplate> </asp:TemplateField> I need to figure out how to get the home phone number specifically (filter based on phone type) and handle the scenario where the customer does not have a home phone in the database. Right now it's throwing an out of range exception if the customer does not have any phone numbers. I've tried using the Where operator with a lambda expression to filter the phone type but it doesn't work: <%# Eval("Phones.Where(p => p.PhoneTypeId == 2).PhoneNumber") %> Solutions or links to any good articles on the subject would be much appreciated.

    Read the article

  • Set tier price on different products (special conditions) in Magento?

    - by user1547625
    Let’s say I sell mobile phones. I might sell phones with the following tiered pricing iPhone4 (1x$200ea. 3x$150ea. 10x$100ea.) iPhone4s (1x$300ea. 3x$250ea. 10x$200ea.) iPhone5 (1x$500ea. 3x$400ea. 10x$1300ea.) Plus maybe I sell Samsungs, Nokias, accessories, etc. So let’s say a customer wants to buy 3 iphones, but they want 1x iPhone 4, 1x iPhone 4s and 1x iPhone 5. Instead of getting the single unit price for each, we would want to group iphones, so that they would get the 3x price for each unit. So they would spend $150 on the iPhone 4, $250 on the iPhone 4s and $400 on the iPhone 5.... We’d have several categories and could create some type of spreadsheet for you, but would want to also have the ability to set up this categorization in the future. So please tell me how to get this done from magento admin or any other way?

    Read the article

  • Exchange 2007 - Exchange ActiveSync

    - by Wu
    We have ISA 2006 and Exchange 2007 and would like to get the Exchange ActiveSync to sync with non-windows base phones eg.Sony Ericsson... We got it to sync with Windows base phone ie. smart phone or PDA... but not able to get it to syc with Sony Ericsson phone which is not a windows base phone. Does anyone come across this issue before and how to solve it?

    Read the article

  • Using Android 2.0 with Exchange server behind firewall

    - by Yurik
    Blackberry has an enterprise server that works with MS Exchange, and pushes all updates to the user's blackberry devices. We are considering switching to Android phones, which supposedly support Exchange servers. Will there be a similar program for Android? Are there any configuration changes that have to be done on Exchange server? (Exchange is behind the corp firewall).

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >