Search Results

Search found 71021 results on 2841 pages for 'remote work'.

Page 14/2841 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Iptables remote port forwarding and dynamic remote ip

  - by lbwtz2

  Hello, I want to forward a port from my remote vps to my domestic server and I am quite a newbie with iptables. The problem is that I am using a dynamic dns service to reach my home server from the internet so I don't have a fixed ip and iptables doesn't like urls. The rules I am willing to use are these: -t nat -A PREROUTING -p tcp -i eth0 -d xxx.xxx.xxx.xxx --dport 8888 -j DNAT --to myhome.tld:80 -A FORWARD -p tcp -i eth0 -d myhome.tld --dport 80 -j ACCEPT Of course I recevie a Error BAD IP ADDRESS because of myhome.tld. What can I do?

  Read the article

• "Work stealing" vs. "Work shrugging"?

  - by John

  Why is it that I can find lots of information on "work stealing" and nothing on "work shrugging" as a dynamic load-balancing strategy? By "work-shrugging" I mean busy processors pushing excessive work towards less loaded neighbours rather than idle processors pulling work from busy neighbours ("work-stealing"). I think the general scalability should be the same for both strategies. However I believe that it is much more efficient for busy processors to wake idle processors if and when there is definitely work for them to do than having idle processors spinning or waking periodically to speculatively poll all neighbours for possible work. Anyway a quick google didn't show up anything under the heading of "Work Shrugging" or similar so any pointers to prior-art and the jargon for this strategy would be welcome. Clarification/Confession In more detail:- By "Work Shrugging" I actually envisage the work submitting processor (which may or may not be the target processor) being responsible for looking around the immediate locality of the preferred target processor (based on data/code locality) to decide if a near neighbour should be given the new work instead because they don't have as much work to do. I am talking about an atomic read of the immediate (typically 2 to 4) neighbours' estimated q length here. I do not think this is any more coupling than implied by the thieves polling & stealing from their neighbours - just much less often - or rather - only when it makes economic sense to do so. (I am assuming "lock-free, almost wait-free" queue structures in both strategies). Thanks.

  Read the article

• Spring MVC jQuery remote validation

  - by raulsan

  Hi, I am using Spring MVC on the server side, but in one of the pages I decided to create an AJAX validation with jQuery rather than the default Spring validation. Everything works great, except when I have to do a remote validation to check if a "title" already exists. For the javascript I have the following: var validator = $("form").validate({ rules: { title: { minlength: 6, required: true, remote: { url: location.href.substring(0,location.href.lastIndexOf('/'))+"/checkLocalArticleTitle.do", type: "GET" } }, html: { minlength: 50, required: true } }, messages: { title: { required: "A title is required.", remote: "This title already exists." } } }); Then, I use Spring-Json to make this validation and give a response: @RequestMapping("/checkLocalArticleTitle.do") public ModelAndView checkLocalArticleTitle(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { Map model = new HashMap(); String result = "FALSE"; try{ String title = request.getParameter("title"); if(!EJBRequester.articleExists(title)){ result = "TRUE"; } }catch(Exception e){ System.err.println("Exception: " + e.getMessage()); } model.put("result",result); return new ModelAndView("jsonView", model); } However, this does not work and the field "title" is never validated. I think the reason for this is that I am returning an answer in the manner: {result:"TRUE"} when in fact, the answer should be: {"TRUE"} I don't know how to return a single response like this one using a ModelAndView answer. Another thing that is not working is the customized message for the "remote" validation: messages: { title: { required: "A title is required.", remote: "This title already exists." } }, The required message works, but not the remote message. I looked around, but I didn't see many people using Spring and jQuery at the same time. I would appreciate some help here.

  Read the article

• Return if remote stored procedure fails

  - by njk

  I am in the process of creating a stored procedure. This stored procedure runs local as well as external stored procedures. For simplicity, I'll call the local server [LOCAL] and the remote server [REMOTE]. USE [LOCAL] GO SET ANSI_NULLS ON GO SET QUOTED_IDENTIFIER ON GO ALTER PROCEDURE [dbo].[monthlyRollUp] AS SET NOCOUNT, XACT_ABORT ON BEGIN TRY EXEC [REOMTE].[DB].[table].[sp] --This transaction should only begin if the remote procedure does not fail BEGIN TRAN EXEC [LOCAL].[DB].[table].[sp1] COMMIT BEGIN TRAN EXEC [LOCAL].[DB].[table].[sp2] COMMIT BEGIN TRAN EXEC [LOCAL].[DB].[table].[sp3] COMMIT BEGIN TRAN EXEC [LOCAL].[DB].[table].[sp4] COMMIT END TRY BEGIN CATCH -- Insert error into log table INSERT INTO [dbo].[log_table] (stamp, errorNumber, errorSeverity, errorState, errorProcedure, errorLine, errorMessage) SELECT GETDATE(), ERROR_NUMBER(), ERROR_SEVERITY(), ERROR_STATE(), ERROR_PROCEDURE(), ERROR_LINE(), ERROR_MESSAGE() END CATCH GO When using a transaction on the remote procedure, it throws this error: OLE DB provider ... returned message "The partner transaction manager has disabled its support for remote/network transactions.". I get that I'm unable to run a transaction locally for a remote procedure. How can I ensure that the this procedure will exit and rollback if any part of the procedure fails?

  Read the article

• Sending microphone input over Remote Desktop 7.0

  - by Taylor Price

  I am using Remote Desktop 7 (the new version that came out with Windows 7) to control a Windows XP Pro machine. I have selected "Record from this computer" in the Remote Audio settings. When I connect to the machine, go to the control panel, open the sound panel, and go to the audio tab, I find that the default sound playback device is "Microsoft RDP Audio Driver". However, there is no default sound recording device. As expected, my IP phone thinks there is no recording device. If I am sitting in front of the computer with a mic plugged in, it works just fine. Has anybody else been able to get this work appropriately? Is there anything that I have to setup on the XP machine to get this working? Thanks in advance. Edit: As John T pointed out below, you have to be connecting to a Windows 7 Enterprise or Ultimate machine for this to work. I've also found out that Multi-monitor support has the same requirement.

  Read the article

• Remote Desktop to Server 2008R2 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• MySQL remote access not working - Port Close?

  - by dave.zap

  I am not able to get a remote connection established to MySQL. From my pc I am able to telnet to 3306 on the existing server, but when I try the same with the new server it hangs for few minutes then returns # mysql -utest3 -h [server ip] -p Enter password: ERROR 2003 (HY000): Can't connect to MySQL server on '[server ip]' (110) Here is some output from the server. # nmap -sT -O localhost -p 3306 ... PORT STATE SERVICE 3306/tcp closed mysql ... # netstat -anp | grep mysql tcp 0 0 [server ip]:3306 0.0.0.0:* LISTEN 6349/mysqld unix 2 [ ACC ] STREAM LISTENING 12286 6349/mysqld /DATA/mysql/mysql.sock # netstat -anp | grep 3306 tcp 0 0 [server ip]:3306 0.0.0.0:* LISTEN 6349/mysqld unix 3 [ ] STREAM CONNECTED 3306 1411/audispd # lsof -i TCP:3306 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME mysqld 6349 mysql 10u IPv4 12285 0t0 TCP [domain]:mysql (LISTEN) I am running... OS CentOS release 5.8 (Final) mysql 5.5.28 (Remi) Note: Internal connections to mysql work fine. I have disabled IPtables, the box has no other firewall, it runs Apache on port 80 and ssh no problem. Had followed this tutorial - http://www.cyberciti.biz/tips/how-do-i-enable-remote-access-to-mysql-database-server.html I have bound the IP address in my.cnf user=mysql bind-address = [sever ip] port=3306 I even started over by deleting the mysql folder in my datastore and running mysql_install_db --datadir=/DATA/mysql --force Then recreated all the users as per the manual... http://dev.mysql.com/doc/refman/5.5/en/adding-users.html I have created one test user CREATE USER 'test'@'%' IDENTIFIED BY '[password]'; GRANT ALL PRIVILEGES ON *.* TO 'test'@'%' WITH GRANT OPTION; FLUSH PRIVILEGES; So all I can see is that the port is not really open. Where else might I look? thanks

  Read the article

• Windows Server 2008 Remote Desktop printing blank pages

  - by Colin Pickard

  I have a Windows Server 2008 (not R2) machine which has problems with redirected printing. Clients connecting via Remote Desktop have their printers redirected and appearing for them to print to, but printing from applications on the server to local printers is giving blank pages, missing pages, or pages with headers/footers but no middle section. The issues are consistant for similar prints, but sometimes other prints and/or applications will work correctly. I have installed PDFCreator locally on the server, and the same print jobs sent by the same application appear correctly in the PDFs. Printing that PDF via the redirected printer prints correctly. I have tried the following: Installing drivers. I’ve installed several drivers different drivers, for both the client and server operating system and architecture, on the client and the server. Reinstalling the printers. I’ve tried reinstalling on remote print servers, the clients, and the host server, and tried different client machines. Granting everyone full permissions on the print spool folder on the server. Editing the registry to forward non-USB ports (http://support.microsoft.com/kb/302361) None of these have made any difference. The clients are using Windows 7 or Windows XP and none of them have any issues with printing locally. Any ideas? Thanks!

  Read the article

• Remote Desktop to Server 2008 fails from one particular Win7 client

  - by Jesse McGrew

  I have a VPS running Windows Web Server 2008 R2. I'm able to connect using Remote Desktop from my home PC (Windows 7), personal laptop (Windows 7), and work laptop (Windows XP). However, I cannot connect from my work PC (Windows 7). I receive the error "The logon attempt failed" in the RDP client, and the server event log shows "An account failed to log on" with this explanation: Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: username Account Domain: hostname Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: JESSE-PC Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: NtLmSsp Authentication Package: NTLM Transited Services: - Package Name (NTLM only): - Key Length: 0 I can connect from the offending work PC if I start up Windows XP Mode and use the RDP client inside that. The server is part of a domain but my account is local, so I'm logging in using a username of the form hostname\username. None of the clients are part of a domain. The server uses a self-signed certificate, and connecting from home I get a warning about that, but connecting from work I just get the logon error.

  Read the article

• Multiple Remote Desktop Connection in Windows Server 2003?

  - by Joel Bradley

  My company is transitioning all user PC's to Windows 7 64-Bit in anticipation of the 2014 cutoff for Windows XP support. So far everything has been going great except for one specific piece of software that will not run in Windows 7. The current plan is to give everyone a cheap secondary PC to run this software but I feel that's a little much for software that's not even used all the time, although it is essential. I've suggested we install virtual machines but the company does not want to pay for the XP licences. I have access to a copy of Windows Server 2003 that is no longer being used and I was wondering if it was possible to create a remote desktop server. I know it can be done on a one-to-one basis, but this is a 15 person helpdesk. I'd like to be able to support multiple remote dekstop sessions, each with their own logins and dekstops. Is this possible? Are there any other alternatives to my issue? FYI, I've been told that XP mode is only free for consumers. There are costs when used in a corporate environment.

  Read the article

• Windows 7 remote desktop connection does not respond to mouse or keyboard

  - by Daniel Jette

  Pretty much every time I connect to my work PC from home (both running Windows 7), I can see the screen refresh and signs of life (clock changes, notifications pop up), but I cannot interact with the remote machine at all. Mouse and keyboard input are both ignored. If I repeatedly reconnect, I will eventually get a connection that works. I think either a setting on my host machine, VPN client or work network is configured wrong. My home PC is running Windows 7 Professional. My work PC is running Windows 7 Enterprise. My VPN client is Cisco AnyConnect. Is this a problem anyone else has run in to? Any suggestions for settings to tweak?

  Read the article

• Enabling Multiple Monitor Support from Terminal Services/Remote Desktop over Citrix

  - by Nicolas Webb

  Our Remote Desktop/Terminal Services solution where I work relies on Citrix for machines not connected via the VPN. We're using Citrix Xen server (I'm pretty sure) and I'm going to try to connect to a Windows 7 Host (my work computer) and I think the RDC client runs on a Win2003 host (exposed via Citrix). Is it possible to take advantage of Windows 7 multiple monitor support for RDC with this setup? Would I need to try getting my Citrix guys to have a different host machine for the RDC (Win2008, or Win7?)? I'm probably going to connect using the OS X Citrix client, but I'd be willing to BootCamp/Fusion up a Windows instance to work remotely, as well. I really want to be able to use multiple monitors remotely. It does "span" multiple montiors currently (I have a 3000x1024 desktop, for example) but I'd rather it be "true" multiple monitor instead of one giant desktop, if possible.

  Read the article

• Synchronizing local and remote cache in distributed caching

  - by ltfishie

  With a distributed cache, a subset of the cache is kept locally while the rest is held remotely. In a get operation, if the entry is not available locally, the remote cache will be used and and the entry is added to local cache. In a put operation, both the local cache and remote cache are updated. Other nodes in the cluster also need to be notified to invalidate their local cache as well. What's a simplest way to achieve this if you implemented it yourself, assuming that nodes are not aware of each other. Edit My current implementation goes like this: Each cache entry contains a time stamp. Put operation will update local cache and remote cache Get operation will try local cache then remote cache A background thread on each node will check remote cache periodically for each entry in local cache. If the timestamp on remote is newer overwrite the local. If entry is not found in remote, delete it from local.

  Read the article

• Remote Desktop event ID 20499. No noticeable issues

  - by Marc05

  I get a warning event with ID 20499 for TerminalServices-RemoteConnectionManager.The error is: Remote Desktop Services has taken too long to load the user configuration from server \server.domain.home for user administrator. Yet, I don't see any issues (I'm guessing because that user is on the machine local). Why am I getting this warning? I'm on Windows Server 2012 R2 connecting from a Windows 8.1.

  Read the article

• Remote Email Access?

  - by Tyler

  I have remote email access from an iPhone or my Android phone, but I cannot setup a Windows Email Client to check my email using the exact same information I provided in my phones. The email system is an Exchange 2003 and I hate using the cheap Outlook Web App that it has. User: [email protected] Password: 1234 Server: mail.domain.com And that works for they phones. So why can't I get it to work on my email client? Maybe a DNS problem?

  Read the article

• routing and remote access service which was unable to start

  - by Reed Knackstedt

  Hi.. when I go through the set up in xp pro sp3 to create incoming network connection i get this message, incoming conections depends on routing and remote access serice which was unable to start.. This happens on both of my machines I try it on.. Help Thanks Reed..

  Read the article

• problem with enabling remote management of hyper-v server 2008 r2

  - by Pai Gaudêncio

  Howdy, I just recently installed hyper-v server 2008 r2 on a dedicated server i have, but i'm having trouble enabling remote management. Running the HVRemote - http://code.msdn.microsoft.com/HVRemote - tool seems to have yielded some positive results, and all tests on the server pass (firewall, permissions, etc), but client-side things are not working. I'm stuck at this step : 5: - Simple query to root\cimv2 WMI namespace FAIL - Simple query failed Cannot perform simple query against root\cimv2 Anyone could help me figure this out? I'm almost giving up and installing XenServer... Thanks

  Read the article

• Unable to establish remote access to workplace pc windows 7

  - by sam

  I am successfully connected to my workplace via vpn. But when I try to connect to my pc via remote desktop it keep asking for credentials even I am providing the right one. This works fine in windows xp but unable to connect using win 7. Also after establishing a vpn I lost my internet access. Any idea.

  Read the article

• Total newb having SSH tunnel and remote MySQL access problems

  - by kscott

  I don't often work with linux or need to SSH tunnel into remote MySQL databases, so pardon my ignorance. I'm using Windows 7 and am needing to connect to a remote MySQL instance on a Linux server. For months I had been using the HeidiSQL client application successfully. Today two things happened: the DB moved to a new server and I updated HeidiSQL, now I cannot log in to the MySQL server, when attempting I get this message from Heidi: SQL Error (2003) in statement #0: Can't connect to MySQL server on 'localhost' (10061) If I use Putty, I can connect to the server and get MySQL access through command line, including fetching data from the DB. I assume this means my credentials and address are correct, but do not understand why putting those same details into HeidiSQL's SSH tunnel info won't work. I also downloaded the MySQL Workbench and attempted to set up a connection through that client and got this message: Cannot Connect to Database Server Your connection attempt failed for user 'myusername' from your host to server at localhost:3306: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 Please: 1 Check that mysql is running on server localhost 2 Check that mysql is running on port 3306 (note: 3306 is the default, but this can be changed) 3 Check the myusername has rights to connect to localhost from your address (mysql rights define what clients can connect to the server and from which machines) 4 Make sure you are both providing a password if needed and using the correct password for localhost connecting from the host address you're connecting from From Googling around I see that it could be related to the MySQL bind-address, but I am a third party sub-contractor with no access to the MySQL settings of this box and the system admin is assuring me that I'm an idiot and need to figure it out on my end. This is completely possible but I don't know what else to try. Edit 1 - The client settings I am using In Heidi and MySQL Workbench I am using the following: SSH host + port: theHostnameOfTheRemoteServer.com:22 {this is the same host I can Putty to} SSH Username: mySSHusername {the same user name I use for my Putty connection} SSH Password: mySSHpassword {the same password for the Putty connection} Local port: 3307 {this is on the SSH settings tab and was defaulted to 3307 by Heidi, changing it to 3306 gives me a different error: SQL Error (1045) in statement #0: Access denied for user 'mySQLusername'@'localhost' (using password: YES)"} MySQL host: theHostnameOfTheRemoteServer.com {consensus seems to be I should use 'localhost' here} MySQL User: mySQLusername {which I can connect with once in with Putty} MySQL Password: mySQLpassword {which works once in with Putty} Port: 3306

  Read the article

• Remote desktop to dedicated server running CentOS 5

  - by Saif Bechan

  I have a dedicated server running CentOS. I was wondering if it is possible to remote desktop to this server. If this is possible can someone explain to me how this works. I have downloaded a VMware image of CentSO, and i can run it with the VMware player, but I don't know what to do next. If this is possible can someone guide me in the right direction.

  Read the article

• SMTP Remote Queue on Exchange 2003

  - by Adam

  We are currently using Windows Server 2003 R2 with Exchange 2003 and SolarWinds Exchange Monitor to monitor. A couple of weeks ago the SMTP remote queue began to build up and it got to about 150 messages in the queue when it began to go down. For the last couple of days the queue has been building up and it has now reached 450 messages. Is there anyway that i can clear this and is it anything that I need to worry about? Thanks guys!

  Read the article

• Debian 6 Server Enabling Remote Desktop [closed]

  - by Sampath

  I am currently running a web server on Debian 6 without a GUI. I connect to the server through SSH using putty from my Windows desktop. When managing Windows systems we use RDP to connect remotely, so how would I do the same for my Debian server? Note: I am not an linux power user. My Debian 6 server is a web server serving ruby on rails+mysql, so I would prefer a light weight remote desktop solution.

  Read the article

• View Remote Desktop access logs on Win 2003

  - by NealWalters

  Is there a history log of each use of Remote Desktop. I'd like to view and audit IP addresses. I'm running a dedicated server hosted by a web hosting company. Had some problems recently, and trying to validate if anyone besides me actually logged on (i.e. if user/pass is compromised). Thanks, Neal Walters

  Read the article

• WMI Remote connection objsWbemLocator.ConnectServer

  - by Sam

  I have an issue when connecting to remote machines using the following: Set objWMIService = objSWbemLocator.ConnectServer _ (sIP, "root\CIMV2", strUser, strPassword, "MS_409", "ntlmdomain:" + sDomain, 128) the problem is that some machines are not timing out and the process hangs. Is there a way to cancel the connect and continue with the next ip? I'm using vbscript. Thanks, Sam

  Read the article

• Options for gaming remotely on a LAN?

  - by Schwern

  I have a Windows 7 desktop for gaming, a big bulky tower with a nice graphics card. I'd like to sit out on my porch rather than inside while the weather is nice and play games. I have a high end Macbook Pro. What are my options? I figure either remote desktop over the LAN on the Macbook or maybe wireless video, keyboard and mouse. Something so I don't have to physically move the PC. The sort of games range from things like Skyrim to SW:TOR to Torchlight 2. What are my options? They have to do a better than running Boot Camp on the Macbook (MacBookPro8,1 i7 2.7 Ghz but Intel Graphics 3000). I realize there's a lot of issues involved in running a game over a remote desktop with a decent frame rate, I'm interested in a practical answer with real experience behind them. Ideally something that works on a OS X so I don't have to reboot into Windows.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >