Search Results

Search found 931 results on 38 pages for 'sean taylor'.

Page 14/38 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Windows 7 boot problem on a Lenovo Thinkpad Z61m 9450HAG

  - by Matt Taylor

  I recently did a full upgrade of Windows 7 on my Thinkpad. Everything worked fine after up until the second reboot (the first reboot after some updates installed worked OK). At second reboot time the system would just black screen before the Windows logo appears. Disk/wireless/power/battery lights are all lit and the disk light is active (flickering). However, if I remove my battery and boot with just power it boots fine and quickly, and everything is OK. Any help on why this won't boot with battery plugged in is greatly appreciated. I need to take this battery out on the road/trains, etc. A little more detail on this story. The battery I had inserted when doing the (failed) boot was a long life battery. I have not tried inserting this battery when Windows is logged in. I have another (normal life) battery that I have charged up within Windows. It has just got to 100% and I am about to reboot with it in. I am using the Lenovo power manager to diagnose the battery - all seems OK. I will report back shortly as to the outcome. OK, so I chose the reboot option from within Windows, the machine seemed to shutdown okay, but then stalled. It didn't turn off completely and didn't reboot, but just sat, with the fan humming, somewhere in between! I had to hold the power button in for a few seconds until the fan stopped and then hit the power button again to boot the machine from fresh. One good thing, with this battery (the normal one) it booted into Windows 7 the first time with a battery! So, now I have rebooting issues. I have 3 errors in the event log: A timeout was reached (30000 milliseconds) while waiting for the lxdxCATSCustConnectService service to connect. The lxdxCATSCustConnectService service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion. The following boot-start or system-start driver(s) failed to load: cdrom Any thoughts?

  Read the article

• Lenovo remote control media redirect

  - by Braithwaite Patrick Sean

  On a lenovo ThinkServer RD240 running firmware 1.20 with the latest BNC software, using the remote console to redirect a CD-ROM fails with the error: "CD-ROM redirection is not supported on this platform". Similar error for forwarding an iso image, foppy and USB drive. I tried executing the management console from Ubuntu, Windows 7 and OS X with the exact same error. The question is: What platform does the jViewer console support any kind of media redirection?

  Read the article

• Tab Completion In Emacs shell-mode SSH Sessions

  - by Sean M

  My current use pattern of emacs results in my having several shell-mode buffers open, each running an ssh session. I am running into an issue with this, though - when I try to tab-complete file names and other things in my remote session, the shell attempts to use completions available on the local machine instead of on the remote machine. For example, if the file ~/foobar exists on the local machine and ~/frob exists on the remote machine, typing in ~/f and pressing tab results in ~/foobar instead of completing correctly. If I use ssh outside of emacs and try the same thing, I get the correct completion of ~/frob instead. How can I get tab-completion to complete the way it does in normal ssh sessions ?

  Read the article

• How can I get black window borders in Windows 8?

  - by sean e

  In Windows 8, when I go into Control Panel\Appearance and Personalization\Personalization\Window Color and Appearance the amount of control over window colors is greatly reduced as compared to Windows 7. The color controls do not allow you to make Window borders display in black. Is there some other way to set the window border color in Windows 8? Edit 1: Clearly the standard way does not work in Windows 8. The question is, is there another way? Perhaps through the registry for example? Edit 2: I tried copying the values in HKEY_CURRENT_USER\Software\Microsoft\Windows\DWM from my Win7 system to the Win8 system without success (killing the 2 DWM processes after each change - they are automatically restarted and do use the new values).

  Read the article

• Is there a way to change the playback speed of a screencast recorded with Camtasia for Mac?

  - by Adam Taylor

  Preferably within Camtasia for Mac but if I need to use another programme, I guess I will. I recorded a 2.5hr coding session that I want to speed up to 2.5 minutes ideally... just for fun! Thanks

  Read the article

• Force running a program as non-administrator in Vista

  - by Peter Taylor

  I've just installed, on Vista 32-bit, a program which in my opinion shouldn't require administrator rights. It's not installed in a system directory, and its purpose shouldn't obviously require any special privileges. However, the .exe has a UAC shield on it, and it asks me to elevate privileges immediately upon execution. I'm prepared to risk it doing nasty things with the privileges of my user account, but not prepared to risk elevating it. Is there anything I can do short of setting up a virtual machine for it (or downloading the source and compiling it myself)? (FWIW, the program in question is Pencil - pencil.evolus.vn/en-US/Downloads/Application.aspx - but I'm more interested in general answers than app-specific ones).

  Read the article

• Visual Studio 2008/2010 Intellisense disable tab key

  - by Sean Edwards

  So I've been having problems with my left wrist and working on code for extended period of times, and I've pretty much narrowed the cause down to Intellisense autocomplete and the tab key. Ok, to be fair, I can't blame Intellisense, but constantly reaching over to hit that key is causing problems. I've discovered Enter does the exact same thing in that context, but that's not the key I instinctively reach for. Is it possible to outright disable the function of the tab key in intellisense, so I'm forced to use Enter instead (which I hit without contorting my wrist oddly.) Thanks. P.S. I do have Visual Assist, so if it's not possible in Visual Studio itself, can VAssistX help?

  Read the article

• Outlook unable to print email

  - by Jason Taylor

  I have an installation of Outlook 2003 that won't print emails as of this morning. It can print calendars, and every other program can print fine. Outlook won't print the emails to any printer, not even a PDF creator. As soon as you hit "Print" nothing happens, there's no notification that the print job was sent or anything. The print server never receives a request to print from the computer.

  Read the article

• After Upgrading Ubuntu to 9.10 my hard drive now has a warning.

  - by Sean

  it is a 500gb hard drive format as ext3 path /dev/sdc1 The disk utility does not even see this. This Warning is from gparted: e2label: No such device or address while trying to open /dev/sdc1 Couldn't find valid filesystem superblock. Couldn't find valid filesystem superblock. dump2fs 1.41.9 (22-Aug-2009) dumpe2fs: No such device or address while trying to open /dev/sdc1 Unable to read contents of this file system? Because of this some operations may be unavailable. END OF ERROR MESSAGE Did I lose something during the upgrade of the system? Was it the hard drive or the Ubuntu system that went bad?

  Read the article

• Can't Configure IBM 8275-416 Switch Via Serial

  - by Sean M

  I am attempting to configure an IBM 8275-416 switch (I found a manual here) via serial connection. However, when I connect with HyperTerminal, the output contains a lot of garbage characters. It's pretty much unusable, because there's enough layout-breaking text-gunk that it's very difficult to determine what's actually being displayed. . I was able to reset the switch to factory defaults via the terminal interface, so I know that it's not entirely broken. It also performs basic functions all right (i.e., you plug in clients and Ethernet cables - they can connect to clients plugged into other ports) - but I'd like it to do more than that (VLANs yay). I don't know if its in-band UI is operational or not, because I can't get the terminal interface to behave well enough to properly turn on the web/SNMP UI. So that's not available. Things I've tried: - Changing the encoding: HyperTerminal lets me choose between Standard JIS and Shift-JIS. Neither setting fixes the issue. - Checking emulation settings: The manual demands VT100, 19200 baud, 8 data bits, and such: I have faithfully applied these settings, both in HyperTerminal's settings and in the properties of the COM1 port in Device Manager (connecting from a Windows machine). - Restoring to factory defaults: See above. Things that it could be, but that seem unlikely: - Cabling: Couldn't find a proper null-modem cable, so used two 232-to-RJ45 adapters. But if it was a problem with the cable, wouldn't it be more likely to not connect or do input at all, rather than just garble the text? Since I was actually able to perform the reset-to-factory defaults operation, I don't think it's this. - Device as a whole broken: It is a decade and change old, so it's possible that it's just dying slowly. Again, though, it seems like there would be more symptoms than just garbled text in the terminal. What else can I try to get a sane interface to this switch?

  Read the article

• *.example.com wildcard domain can be parsed from a single page?

  - by Sean Kean

  For a domain 'example.com' - what is the easiest way to set up a wildcard dns (*.example.com), hosting, and htaccess/httpd.conf/virtualhost, and script on a page so that: how.do.i.setup.a.site.with.wildcards.like.this.example.com or anything.that.is.given.as.a.subdomain.for.example.com is rendered by a page at example.com/index.html - yet keeps the wildcard subdomain in the URL bar and passes the full URL as a parameter for rendering tags in HTML? An example tag is a Facebook comment: { div class="fb-comments" data-href="http://how.do.i.setup.a.site.with.wildcards.like.this.example.com" data-num-posts="2" data-width="500" } I just opened a hosting account with spry.com and have a VPS running Ubuntu 11.04-x86-LAMP - Essentially, what is the most straightforward way of doing this? Thanks so much. (I originally posted this over on stackoverflow but realize its more of a serverfault question)

  Read the article

• Windows Server 2012 Hyper-V very slow

  - by Matt Taylor

  I have been running several Hyper-V VMs on Windows Server 2008 R2 for the past couple of years and enjoying perfectly adequate performance for my testing/development/r&d environments. I'm a software developer so my hardware knowledge is basic however I built the rig using: •Gigabyte GA-X58A-UD3R Intel X58 (Socket 1366) DDR3 Motherboard •Intel Core i7 960 3.20GHz (Bloomfield) (Socket LGA1366) •24GB triple channel RAM The host OS is running on an OCZ SSD and all the VMs are running on a 2TB Marvell SATA3 RAID 0 array consisting of 2 Western Digital Caviar Black 7,200rpm drives. I have tested the speed of the 2TB drive and appear to be getting less than 3Mbs but it can adequately run a 4 VM farm including a DC, (SQL) database and IIS application servers. I recently upgraded the SSD on which the host runs to a 256GB OCZ Vertex 4 and took the opportunity to upgrade to Windows Server 2012 and installed the Hyper-V role. I tried importing one of my existing Windows Server 2008 R2 VMs (and converted it to .vhdx) plus I have tried creating a brand new Windows Server 2008 R2 VM but both are running extremely slowly and I can see nothing obvious using the host and guest Task Manager/Resource Monitor tools. In both cases the VM has 8GB RAM (fixed), 4 CPUs, fixed size HD (not expanding) and is using an external virtual network running on a separate NIC to the host. I have upgraded the BIOS to the latest available version and checked the virtualization settings. I have run out of "obvious" (to a developer) things to check/configure and my next option will be to re-install the host OS but before I do I would very much appreciate any advice from any experts out there. Thanks

  Read the article

• How do I stop VMware player from resizing?

  - by Sean

  Hi! I just downloaded VMware player (I used to use Virtual Box, but I needed Windows Aero, and vbox doesn't support that yet) But it will automatically resize the guest when I resize the window, and I do not want that. I did not see an option to turn it off. Does anyone know? Thank you.

  Read the article

• overusage of RAM in Hypervm VPS

  - by Mac Taylor

  hey guys I have a VPS running on hypervm in proceses list i have something like this > /usr/libexec/mysqld --basedir=/usr > --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/ user : mysql which takes 150 mb RAM and then /usr/sbin/named -u named -t /var/named/chroot user : Named 50 mb RAM taken by this process how can i solve this overusage of RAM and reduce it . I have access to root and SSH

  Read the article

• Broad Band LAN connection through existing 6 wire phone line ( no phone connected )

  - by Paul Taylor

  I have an (up to but never achieved ) 10 mb broadband signal coming into my house along the telephone line. The modem then connects the broadband signal via a LAN connection and Wi-Fi signal to my computers and iPad. My workshop desk is 54 yards (approx. 50m) downhill from the modem (part of a separate building) – too far to give a good direct signal. The inside corner of the workshop (by a window) receives a weak signal. I have a disconnected telephone cable consisting of 6 wires going from the house to the workshop. The telephone is no longer used in the workshop - we use our mobile number for business calls. A broad band signal using the cable would not have to share with a phone. What would be the most economic price/efficient way to get the broadband signal to the workshop? I am writing in hope that since the telephone didn't need the six wires, an Ethernet connection might be similar and not need all the eight wires for a LAN connection. In theory could use the telephone wire to pull an Ethernet cable trough the underground pipe but I doubt if the cable would survive the strain. The broad band connection in the workshop does not have to have network facility. My skill level is high enough to do house wiring, plumbing and gas fitting; so given any sound advice and a wiring diagram or instructions I can probably work out the rest myself.

  Read the article

• How disable Apple iCal from popping up with every email invite/update?

  - by Sean

  My iCal has new behavior (since upgrading to SL). Every time I get an ical attachment in Mail, the iCal app flies up in my face. I don't see any way to turn off this behavior and it's amazingly disruptive when I'm busy with other activities. Help? EDIT: I want iCal to add the invitations, so when I cmd-tab to the app those items are in the queue awaiting approval. What I am hoping to learn is how to stop the popup action forcing the application to become the top-level window.

  Read the article

• once VPNed into pfSense, unable to hit the public URLs of my websites - they are routed to the pfSense box

  - by Sean

  I have a pfSense box setup as the firewall/router/VPN appliance at my colo. Once I VPN into the colo (either pptp or openvpn, pptp preferred due to multiple clients and ease of configuration), I am able to hit all my servers by their private 10.10.10.x ip and am able to browse the public internet without issue. When I try and hit the URL of a domain hosted by one of my servers, I am prompted for credentials. If I login using the pfSense credentials, I'm connected to pfSense as if I'd used it's internal IP. If I hack my hosts file to point url - server private IP it works fine, but this is obviously not a good solution. To recap: not connected to VPN - www.myurl.com works connected to VPN - www.myurl.com never makes it to the correct server, but is sent only to the pfSense box I'm sure it's something small that I've missed in the pfSense config.

  Read the article

• Is there a way to insert a formatted calculation into Excel 2010 without using an image?

  - by Ryan Taylor

  I am maintaining a list of database column names, notes, and their calculations in an Excel 2010 spreadsheet. The calculations are included so as to document how to derive the values for the various columns and not for calculations within the spreadsheet. I have been entering the calculations into the cells simply as unformatted text like so: 100 - ((FiscalYearRegionConsumption - BaselineRegionConsumption) / (GoalRegionConsumption - BaselineRegionConsumption)) * 100 However, for long and/or complex calculations this could become rather unreadable. To improve readability and comprehension I would like to "pretty" print the calculation in an Excel cell. This would result in formatting that would like like this: The only solution I have come up with is to: Write the calculation in another application such as Word Take a screenshot of said calculation Past the screenshot into Excel The primary concern with this approach is maintenance. Should the calculation change or need correction I have to update two different sources of information. Is there a better way included a formatted calculation into an Excel cell?

  Read the article

• Powershell SQL query--connection string

  - by sean

  I am trying to query several different SQL servers and run a command on each of them. I am unable to get the connection string right. Code, below. I receive the following error:Login failed. The login is from an untrusted domain and cannot be used with Windows authentication. I thought if I passed it the credentials it wouldn't care about the domain. How do I get around this? Thanks in advance. $serverList = @(Get-Content "c:\AllServers.txt") $query = "SELECT COUNT(thing) AS [RowCount] FROM My_table" $Database = "My_DB" # Read a file foreach ( $svr in $serverList ) { $conn=new-object System.Data.SqlClient.SQLConnection $ConnectionString = "Server={0};Database={1};User ID=sa;Password=Password;Integrated Security=True" -f $svr, $Database $conn.ConnectionString=$ConnectionString $conn.Open() $cmd=new-object system.Data.SqlClient.SqlCommand($Query,$conn) $conn.Close() }

  Read the article

• Need help finding a program to split PDFs based on text in specific areas

  - by Sean

  I reeeeally need help with this. I work for a University in the admissions office and we get large PDFs of every document that an applicant uploads to us. What I need to do is split these PDFs into separate documents. Each of the separate documents has a head at the top of what type of document it is (Statement of Purpose, Transcript, etc). I found a program a few weeks ago that at first seemed to work great (A-PDF Splitter). It would look for every type of document in a combined PDF (eg. Statement of Purpose), and if it saw that heading it would create a new PDF named "ORIGINALFILENAME-Statement of Purpose". I soon discovered though that the program breaks for no reason on certain PDFs, and I have to take the time to take that PDF out of the queue and start the splitting over again (and we get 250 a day). I contacted their support and they basically told me I was SOL. So please, if you can find me a program to split PDFs into smaller PDFs based on if it finds particular text in a region, then I would be forever in dept to you. If I don't find one soon then I'm going to be spending the entire day splitting PDFs by hand and my boss isn't going to be happy.

  Read the article

• Samba Does Not List Files In Shared Directory

  - by Sean M

  I am running Samba on a CentOS server, and I am experiencing a problem where it allows me to connect to the server and see a share, but shows the share as an empty directory. I find this behavior strange. Here is the stanza in my smb.conf for the given share: [seanm] path = /home/seanm writeable = yes valid users = seanm, root read only = No Here's what I see on the server side: [seanm@server ~]$ ls -l -rw-r--r-- 1 seanm seanm 40 Jan 4 13:45 pangram.txt And yet: [seanm@client ~]$ smbclient //server/seanm -U seanm -W WORKGROUP Enter seanm's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1] smb: \> ls . D 0 Fri Jan 7 10:08:55 2011 .. D 0 Fri Jan 7 07:58:31 2011 58994 blocks of size 262144. 50356 blocks available This behavior is present on both a Windows client and a Linux client system. The behavior is present with the firewall on and with the firewall off, so it's not that. Neither /var/log/messages nor /var/log/secure have any complaints about Samba. I doubt that SELinux is a problem: just in case, here are the relevant settings. [root@server ~]# getsebool -a | grep samba samba_domain_controller --> off samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off What am I doing wrong here, and what can I do to fix it?

  Read the article

• Restarting rsyslog re-sends logs again

  - by Jay Taylor

  I am running Ubuntu 12.04.1 LTS on EC2. I have a bunch of application servers which are configured to forward their logs to a central server via rsyslog. Since putting in Nagios monitoring on the log files on the central server, I've been getting alerts indicating that particular application servers are failing to forward their logs to the centralized server. Logging into the machines and restarting the rsyslog service fixes the problem. However, rsyslog then re-transmits the logs again, resulting in duplicates on the collector. Why is it doing this?

  Read the article

• How do Windows 7 encrypted files look like?

  - by Sean Farrell

  Ok this is kind of an odd question: How do Windows 7 (Home Premium) encrypted files look like "from the outside"? Now here is the story. An acquaintance of a freind of mine got a nasty virus / scareware. So I wiped out my PC technician cap and went to work on it. What I did was remove the drive from the laptop and put drive into my external drive bay. I scanned the drive and yes it was loaded with stuff. That basically cured the infection and I could start the system back up. To check if it cured the problem I wanted to see the system while running. There where two user accounts, on with a password and one without (both admin users !?!). So I logged into the unprotected user and cleaned up the residual issues, like proxy server to localhost in the browser config. Now I wanted to do the same for the password protected user. What I noticed that from my system and the unprotected user account the files of the protected user looked garbled. The files are something like 12 random alphanum chars, but the folders looked ok. Naive as was thought this might be how encrypted files looked "from the outside". (I never use Microsoft's own security features, so how would I know. TrueCrypt is one big blob.) Since the second user could not be reached, I though sod it and removed the password from the account. (That might have been a mistake, I know.) Now I did the same clean up tasks and all nice and fine; except for the files which where still "encrypted". So I looked into many Windows Encrypted Files recovery posts and not all hope is lost, since I should be able to extract the certificate and with the password regain access to the files. Also note that windows did "only" prompt me that removing the password would be insecure, not that access to encrypted files would be lost, like it is claimed in most recovery articles. Resetting the password did not help and I gave up for the night. The question that nagged me half of the last night was, what if the files are not encrypted, but the scare-ware encrypted / destroyed the files? I don't want to spend hours of work trying to recover files that are not recoverable. The ting is that the user does not remember turning it on and aren't the files marked in blue and the filename is readable? Many thanks for input from users who have more knowledge about WEF...

  Read the article

• Firefox addin to "dim" a page

  - by Sean

  Hi, this is simple - I have a page opened all the time in FF, and don't want others passing by to see immediately the page. Is there a plugin that would allow to "dim" the page, unless you over it with a mouse or set focus on window? The idea is similar to laptops screen dimming. Thanks.

  Read the article

• Cisco ASA site-to-site vpn not initiating phase 1 (not sending udp 500 packets)

  - by Sean Steadman

  I am hoping someone here can help me with my problem. I am trying to setup an IPSEC site-to-site VPN between two cisco ASA 5520's in GNS3 (both using 8.4.2). I have been unsuccesful in getting the tunnel up and it appears neither ASA is sending packets out,in regards to phase 1 and phase 2 (tested by using wireshark and seeing NO udp 500 packets). Doing show ipsec sa and such shows nothing. CALIFORNIA(config)# show ipsec sa There are no ipsec sas FLA-ASA# show ipsec sa There are no ipsec sas I will attach both configurations in two different pastebin files as to keep this post a bit cleaner. Essentially California side has 172.20.1.0/24 and Florida side has 10.10.10.0/24. California ASA config: http://pastebin.com/v0pngYzF Florida ASA config: http://pastebin.com/E2geybta Please let me know if there is any other vital information that could help. I have gotten IPSEC tunnels to work using openSwan (linux) and cisco routers but cannot for the life of me get ASA IPSEC tunnels to work. The ASDM is out of the question I only use cli. Thanks for any useful help!

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >