Search Results

Search found 433 results on 18 pages for 'snap'.

Page 14/18 | < Previous Page | 10 11 12 13 14 15 16 17 18  | Next Page >

• Server Manager from Windows 2008 to Hyper-V 2008 R2?

  - by Roger Lipscombe

  My workstation is running Windows Server 2008. I do not have local admin privileges. I have a Hyper-V Server 2008 R2 (i.e. Core+Hyper-V) box. On that box, I do have local admin privileges. I can Remote Desktop to the box; Hyper-V Manager works fine (outside of Server Manager). It's just that there are some things that are easier to do in Server Manager (partition disks, etc.) than at the command line. I'd like to use Server Manager on my workstation to manage the Hyper-V box. However: When I run Server Manager on my workstation, it prompts for elevation, and won't then let me connect to another server. If I attempt to run MMC and then add "Server Manager" as a Snap-in, it doesn't prompt me for the server name. Then it complains that I'm not an Administrator. It doesn't provide for connecting to another server. The Remote Server Administration Tools (RSAT) are for Windows Vista and Windows 7 RC. These don't install on Windows 2008.

  Read the article

• Expand disk space on Ubuntu 10.04 (VMWare Guest)

  - by Jason Clawson

  I need to resize the disk space of an ubuntu guest in VMWare Workstation. After using the expand disk utility in vmware workstation, I need to do some linux magic to resize the parition. I have searched and found a lot of posts about resizing it. Unfortunately I don't really understand it all that well. Can anyone help me out with this? df -h gives me: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 19G 2.6G 16G 15% / none 496M 172K 495M 1% /dev none 500M 0 500M 0% /dev/shm none 500M 64K 500M 1% /var/run none 500M 0 500M 0% /var/lock none 500M 0 500M 0% /lib/init/rw none 19G 2.6G 16G 15% /var/lib/ureadahead/debugfs /dev/sda1 228M 36M 181M 17% /boot lvs says: LV VG Attr LSize Origin Snap% Move Log Copy% Convert root ubuntu -wi-ao 18.88g swap_1 ubuntu -wi-ao 884.00m fdisk -l says: Disk /dev/sda: 21.5 GB, 21474836480 bytes 255 heads, 63 sectors/track, 2610 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00033718 Device Boot Start End Blocks Id System /dev/sda1 * 1 32 248832 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 32 2611 20719617 5 Extended /dev/sda5 32 2611 20719616 8e Linux LVM I really appreciate the help.

  Read the article

• ESXi 4.1 host not recognising existing VMFS datastore

  - by ThatGraemeGuy

  Existing setup: host1 and host2, ESX 4.0, 2 HBAs each. lun1 and lun2, 2 LUNs belonging to the same RAID set (my terminology might be sketchy here). This has been working just fine all along. I added host3, ESXi 4.1, 2 HBAs. If I view Configuration / Storage Adapters, I can see that both HBAs see both LUNs, but if I view Configuration / Storage, I only see 1 datastore. host1/2 can see both LUNs and I have VMs running on both too. I have rescanned, refreshed and even rebooted, but host3 refuses to acknowledge 1 of the datastores. Does anyone know what's going on? Update: I re-installed the host with ESX (not i) 4.0, same version as the existing hosts and it's still not recognising the vmfs. I think I'm going to SVmotion everything off that datastore then format it. Update2: I've created the LUN from scratch and the problem gets even weirder. I've presented the LUN to all 3 hosts, and I can see the LUN in the vSphere client's Configuration / Storage Adapters section on all 3 hosts. If I create a datastore on the LUN via the Configuration / Storage section on host1, it works fine and I can create an empty folder via datastore browser, but the datastore is not seen by the host2 and host3. I can use the Add Storage wizard on host2 and it will see the LUN. At this point the "VMFS Label" column has the label I gave with "(head)" appended. If I try the Add Storage wizard's "Keep the existing signature" option, it fails with an error "Cannot change the host configuration." and a dialog box that says 'Call "HostStorageSystem.ResolveMultipleUnresolvedVmfsVolumes" for object "storageSystem-17" on vCenter Server "vcenter.company.local" failed.' If I try the Add Storage wizard's "Assign a new signature" option on host2, it will complete and the VMFS label will have "snap-(hexnumber)-" prepended. At this point its also visible on host3, but not host1. I have a similar setup in a different datacenter which didn't give me all this trouble.

  Read the article

• Anonymous access to SMB share hosted on Server 2008 R2 Enterprise

  - by bwerks

  Hi all, First off, I have read through this post and a whole slew of non-SF posts which seem to address the same or a similar problem, however I was still unable to fix my problem. I've got three machines in this situation: a domain-joined server that runs Server 2008 R2 Enterprise ("share server") a domain-joined workstation running XP Pro SP3 ("test server") a domain-unjoined test server running Server 2003 R2 SP2 ("workstation") The share server is exposing a share on the network that the test server must access--it's a Source/Symbol Server share for our debugging purposes. I believe visual studio simply accesses the the share with its own credentials in this case, meaning that the share must be accessible anonymously since the test server isn't joined to the domain and there's no opportunity to supply domain authentication. I've attempted a lot of things to avoid the authentication window when accessing the share: I've enabled the Guest account on the share server and given Guest full sharing/NTFS permissions for the share. I've given ANONYMOUS LOGON full sharing/NTFS permissions for the share. I've added my share to “Network Access: Shares that can be accessed anonymously” in LSP. I've disabled “Network access: Restrict anonymous access to Named Pipes and Shares” in LSP. I've enabled “Network access: Let Everyone permissions apply to anonymous users” in LSP. Added ANONYMOUS LOGON to “Access this computer from the network” in LSP. Added the Guest account to “Access this computer from the network” in LSP. Attempted to provision the share using the Share and Storage Management MMC snap-in. Unfortunately when I attempt to access the share from the test server, I still see the prompt and I'm forced to enter "Guest" manually. I also tried this workflow using the local administrator account on a workstation, and the same thing happens both with and without XP Simple File Sharing enabled. Any idea why I'm getting these results, or what I should have done differently?

  Read the article

• How do you do a keyword search the Services.msc (mmc) window in Windows 7?

  - by Warren P

  When you want to run a service, you have very limited capabilities, in all current Windows versions, as far as I can tell. I usually start Services by typing "services.msc" into the Start-Run box, on most versions of Windows, this works. I know how to click the "Name" column in the MMC view of Windows Services. If you know what the first few characters of a service name is, you can usually sort by the name, and type the prefix to scroll the list down (find Windows Search for example). This seems pretty weak to me, so I spent some time searching the interwebs for tools that do a better job of managing services. Usually I have a keyword that I know "fooWare" might be the keyword, and I need to find the (usually badly named) service and start it and stop it. This is often WAY too hard. The best I could do is "NET SERVICES" from the command line, and maybe add a grep in there, but that doesn't list every service, only a few of them. And the MMC snap-in in Win7 now has an Export List button, exporting to csv text file feature which I have used from time to time, to export and then search. I have thought of writing my own tool. I'm hoping a better "service manager" utility exists out there that sysadmins use. I'd like a search box at the top right corner, kind of the same way that the Add-Remove-Programs dialog in Win7 and Vista has a search facility. Does such a services utility exist out there?

  Read the article

• How to add Sharepoint Powershell to Console2

  - by BGM

  Salvete! I want to add the Powershell Console for Sharepoint to the tablist in Console2. I already have plain Powershell, but I want the Sharepoint Powershell snapin added automatically. If I look at the properties of the Sharepoint Powershell Console shortcut, I see this: C:\Windows\System32\WindowsPowerShell\v1.0\PowerShell.exe -NoExit " & ' C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\\sharepoint.ps1 ' " but that doesn't work in Console2, so I tried this, which doesn't work either: C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe -PSConsoleFile "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\psconsole.psc1" -NoExit " & ' C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\\sharepoint.ps1 ' " Whenever I try, it will load Powershell, but not the Sharepoint Console. I get this: Add-PSSnapin : The Windows PowerShell snap-in 'Microsoft.SharePoint.PowerShell' is not installed on this machine. At C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\CONFIG\POWERSHELL\Registration\SharePoint.ps1:3 char:13 + Add-PsSnapin <<<< Microsoft.SharePoint.PowerShell + CategoryInfo : InvalidArgument: (Microsoft.SharePoint.PowerShell:String) [Add-PSSnapin], PSArgumentException + FullyQualifiedErrorId : AddPSSnapInRead,Microsoft.PowerShell.Commands.AddPSSnapinCommand I tried this out, too. Anybody know?

  Read the article

• Un-install network printer drivers from Win7 64 Home Premium

  - by AkkA

  I recently bought a NAS device that has print server functionality through USB. The printer was already installed and fully working on another Win XP box, set up that box to see the printer over the network and it prints fine. I tried to install the printer on my Win7 laptop (64 bit, Home Premium), but got the wrong drivers somehow, or it just refuses to work. I need to completely un-install the printer drivers and start from scratch. Removing the printer (by going to the printers folder, right click and remove) does not actually un-install the drivers. It only removes the printer from active use. Even if I try to re-install new drivers it will load the old ones. I have read a few things on the net that say to load up a device snap-in or something of the sort into Computer Management, but this seems to be valid for Win7 Pro or greater, the function everyone tells you to use isnt available in Home Premium. Is there anything I can use to manage device driver files in Home Premium? I want to completely remove them from the computer.

  Read the article

• GUI interfaces to ATI card behave weirdly out of the box and after updates.

  - by jdk

  My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

  Read the article

• vmware esxi 5, cant create snapshots and consolidate fails, how to delete old or consolidate redo logs?

  - by Scott Szretter

  I have a VM that seems to be working ok, but when VMWare DR (or I) tries to create a snap shot, it fails, and when I view the summary page of the VM it has a warning at the top showing that the disks need to be consolidated. So I go to snapshot manager for the VM and choose consolidate (in snapshot manager, there are no snapshots actually listed by the way). If fails with this error: This virtual machine has 255 or more redo logs in a single branch of its snapshot tree. The maximum supported limit has been reached, creating new snapshots will not be allowed. To create new snapshots, please delete old snapshots or consolidate the redo logs. If I browse the data store (which has plenty of free space, 2 TB and this vm is under 40gb), in the vm folder, I do in fact see a bunch of files, numbered all the way to 0255: myvm-000255-ctk.vmdk myvm-000255-delta.vmdk myvm-000255.vmdk How can I clean all this up? Is there an SSH command line command or can I delete some of the files safely? Thanks!

  Read the article

• How to merge arbitrary snapshot into base vdi in Virtualbox

  - by jmathew

  I botched a transfer of a VM from one harddisk to the other. Now I'm left with the base vdi and a whole bunch of snapshots. My steps Copied old VM directory over to new HDD Deleted old VM and added new VM using using Machine-add and providing the old XML file Couldn't add base vdi file due to conflict so changed the UUID of base vdi with VBOXMANGE.EXE internalcommands sethduuid <path/to/vdi> Attempt to rollback to a snapshot, but it seems the VM is looking for the snapshots on the old HDD (which is formatted and gone) This is the error (networked is the name): Failed to restore the snapshot networked of the virtual machine lfs. Could not open the medium 'H:\vm\ft.vdi'. VD: error VERR_PATH_NOT_FOUND opening image file 'H:\vm\ft.vdi' (VERR_PATH_NOT_FOUND). Result Code: E_FAIL (0x80004005) Component: Medium Interface: IMedium {53f9cc0c-e0fd-40a5-a404-a7a5272082cd} The old HDD was drive H: the new one is drive N: How can I modify the snapshots/VM to look in N:\vm\ft.vdi for the base vdi? I've already set the default settings in VirtualBox in general (default vm/vm snapshot location). Or if not that how can I merge the old snap shot with the base vdi given that the only things that have changed is the base vdi's UUID?

  Read the article

• Utilities for finding x/y screen coordinates

  - by slothbear

  I have an application that needs the user to enter the x and y location of a couple of items on the screen. [Yes, this is crap and I'll replace it, but for now...] On Mac OS X, I'm using Snapz Pro X. When I choose to take a snap of a selection, the interface displays the mouse cursor location. This is OK for my personal use, but I can't ask users to buy a $69 program for this function. I thought I had a solution with the built-in program "Grab", but it reports the coordinates from the bottom left, and I need it from the top left. I don't have access to Windows; not sure what to use there. I've not even been able to come up with good search terms since mouse and coordinates and x/y are so common. Ideas are welcome there. Extra credit: same x/y finder for Linux. A Java program would be OK too, since the main application is in Java.

  Read the article

• When modern computers boot, what initial setup of RAM do they execute, and how does it exactly work?

  - by user272840

  I know the title reeks of confusion, and some of you might assume I am just wondering about how the computer boots in general, but I'm not. But I'll sort this out for you people now: 1.Onboard firmware is how mostly all modern computer devices work, whether or not with EFI/UEFI(even without "onboard firmware", older computers still employed bank switching, or similar methods with snap-in firmware, cartridges, etc.) 2.On startup there is no "programs" running in the traditional sense yet, i.e. no kernel, OS, user-applications; all of the instructions, especially the very first instruction, is specified by the Instruction Pointer, I am guessing. How is the IP/PC/etc. set to first point to an address for a BIOS/firmware/etc. instruction, and how do the BIOS instructions map themself out in memory prior to startup? 3.Aside from MMIO, BIOS uses certain RAM addresses to have instructions. The big ? comes in when I ask this ... how does BIOS do this? Conclusion: I am assuming that with the very first instruction there is an initial hardware setup for BIOS prior to complete OS bootup. What I want to know is if it's hardware engineered to always work this way, if there's another step in this bootup method I am missing, a gap of information I am unaware of, or how this all works from the very first instruction, and the RAM data itself.

  Read the article

• VirtualBox how to merge arbitrary snapshot into base vdi

  - by jmathew

  I botched a transfer of a VM from one harddisk to the other. Now I'm left with the base vdi and a whole bunch of snapshots. My steps Copied old VM directory over to new HDD Deleted old VM and added new VM using using Machine-add and providing the old XML file Couldn't add base vdi file due to conflict so changed the UUID of base vdi with VBOXMANGE.EXE internalcommands sethduuid Attempt to rollback to a snapshot, but it seems the VM is looking for the snapshots on the old HDD (which is formatted and gone) This is the error (networked is the name): Failed to restore the snapshot networked of the virtual machine lfs. Could not open the medium 'H:\vm\ft.vdi'. VD: error VERR_PATH_NOT_FOUND opening image file 'H:\vm\ft.vdi' (VERR_PATH_NOT_FOUND). Result Code: E_FAIL (0x80004005) Component: Medium Interface: IMedium {53f9cc0c-e0fd-40a5-a404-a7a5272082cd} The old HDD was drive H: the new one is drive N: How can I modify the snapshots/VM to look in N:\vm\ft.vdi for the base vdi? I've already set the default settings in VirtualBox in general (default vm/vm snapshot location). Or if not that how can I merge the old snap shot with the base vdi given that the only things that have changed is the base vdi's UUID? Thanks

  Read the article

• Does ICS modify windows firewall policies in the registry?

  - by insipid

  I had a host machine I wanted to enable ICS on. First I realized that doing so was not possible until I enabled the Windows Firewall. Once I enabled the firewall and set up ICS, I noticed due to group policy I could no longer disable the firewall. Also, any ports I tried to open seemed to be ignored. Although nothing seemed to be configured when I used the mmc snap-in to view local computer policy, when I checked the registry I noticed several policies set there in HKLM (such as disabling AllowLocalPolicyMerge). I was able to remove the policies from the registry and my open ports worked, but they were eventually re-added without my input. The network I am sharing the internet from is an "unsecured" wireless network with an authentication page, is it possible that this is causing those policies to be set? Did ICS set those policies? When you go to the properties of the ICS enabled adapter and go to the ICS settings it takes you to a tab called services where you can add and remove "services running on your network that internet users can access". Is this related to the windows firewall?

  Read the article

• Magical moving desktop icons

  - by Nathan Taylor

  I have encountered a very strange behavior in Windows 7 that I cannot seem to identify and I have never seen or heard of on any system configuration. Whenever I move my mouse to the left-most edge of my primary display (centered in 3-display setup), my desktop icons magically move away from the cursor (up or down and to the right). It only happens when my desktop has focus and the mouse is positioned on the left, top or bottom edge of the main display. Moving the mouse all the way to the right edge of my right secondary display causes the mouse icons to snap back into their correct position. Ridiculous video of the issue My setup is 3 displays on two display adapters. The main display is running at 2560x1600, connected to the machine via a USB-powered DVI-D to DisplayPort adapter and is driven by an NVIDIA NVS 3100M video card. The secondary displays are running at 1440x900 and 1200x1920 and are driven by integrated Intel HD Graphics (mobile). It seems like some kind of panning behavior, but it's obviously not working as expected. I have updated all of my drivers, but no change. It's probably worth noting that the desktop icons are set to auto-arrange.

  Read the article

• User unable to delete folder / files "File in use by another user" Server 2003

  - by Az

  I am administering a standalone Windows 2003 Terminal Server with no domain membership. Occasionally (about once a week or so) a user will attempt to delete a sub-folder in a Shared folder and gets denied with "File in use by another user". I tried checking the shared folder snap-in and that folder is not open. She has full control and is the owner of the folder as well. I even checked in "Effective permissions" for some of the folders / files she cant delete and she truly has full control. I am able to delete the folder as Administrator with no problem. Another odd thing, she can delete the files IN the folder most of the time (this issue happens on both folders and files in the share). Sometimes merely waiting a day or two will allow her to delete the folder or files. I am curious as to why she gets the message that it is in use as creator/owner with full control yet I don't get it simply as a member of the Admin group. If anyone out there has any ideas I'd love to hear them! THANK YOU.

  Read the article

• Removing expired self-signed certificate in IE9 (created with IIS7.5)

  - by Itison

  Over 1 year ago, I created a self-signed certificate in IIS 7.5 and exported it. I then installed it for IE9 (it may have been IE8 at the time), which worked fine until a year later when the certificate expired. I have put this off, but today I created a new self-signed certificate in IIS, exported it, and attempted to install it in IE9. The problem is that for whatever reason, IE cannot seem to forget about the old, expired certificate. Here's what I tried initially: Accessed my ASP.NET application and see the Certificate error. Clicked "View certificates". Clicked "Install Certificate" and then Next/Next/Finish. At this point, it says the import is successful, but it still only shows the expired certificate. I've tried simply double-clicking on the exported certificate on my desktop. Initially I chose to automatically select the certificate store, but then I tried it again and manually selected "Trusted Root Certification Authorities". I've also tried dragging/dropping the certificate over an IE window and clicking "Open". The process is then exactly the same as it is if I had double-clicked on the certificate, but I had hoped that this would somehow specifically tell IE to use this certificate. I tried opening MMC and with the Certificate snap-in, confirmed that the new certificate was added under "Trusted Root Certification Authorities". It was also under my "Personal" certificates (I guess this is where it goes by default). Nothing worked, so I went through every folder in MMC and deleted the expired certificate. I also deleted the expired certificate in IIS. Nothing has worked. Any ideas? I see no clear resolution and I can't seem to find any posts related to this issue.

  Read the article

• How to fix Windows 7 device removal notification loop

  - by Barry Kelly

  Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

  Read the article

• C#, Powershell - Microsoft.Exchange.Management.PowerShell.Admin

  - by Svein Erik

  I'm having troubles using the Microsoft.Exchange.Management.PowerShell.Admin on a server. The server is not the one running Exchange 2007, it's a remote server (in the same zone). I can't figure out how to add the Snapin for Powershell - Microsoft.Exchange.Management.PowerShell.Admin. Is it possible to just get the dll file from the Exchange 2007 server, and copy it to the server where my code is running? Can someone please explain what I need to do to get my code running? The exception that i'm getting now is: "No Windows PowerShell Snap-ins are available for version 1". This is the code that generates the error: public void CreateMailBox(User user) { //Create a runspace for your cmdlets to run and include the Exchange Management SnapIn... RunspaceConfiguration runspaceConf = RunspaceConfiguration.Create(); PSSnapInException PSException = null; PSSnapInInfo info = runspaceConf.AddPSSnapIn("Microsoft.Exchange.Management.PowerShell.Admin", out PSException); Runspace runspace = RunspaceFactory.CreateRunspace(runspaceConf); runspace.Open(); Pipeline pipeline = runspace.CreatePipeline(); Command command = new Command("New-Mailbox"); command.Parameters.Add("Name", user.UserName); .... The error is coming on the line with PSSnapInfo info = runspaceConf..... I'm using .NET 3.5

  Read the article

• How do I set up TFS PowerShell Snapin

  - by TheSean

  I have installed TFS Power Tools and I am trying to use the powershell snapin, but I can't figure out how to set it up. When I look in the install folder, I only see the following 5 dlls. Microsoft.TeamFoundation.PowerToys.Client.dll Microsoft.TeamFoundation.PowerToys.Common.dll Microsoft.TeamFoundation.PowerToys.Controls.dll Microsoft.VisualStudio.TeamFoundation.PowerToys.Common.dll Microsoft.VisualStudio.TeamFoundation.PowerToys.dll I used instalutil to install each one, and then I used the folowing ps code to see what cmdlets where installed so I could add the snapin but it looks like only a handfull exist in those dlls and these commands are not useful to me right now. PS H:\> get-pssnapin -registered Name : TfsBPAPowerShellSnapIn PSVersion : 1.0 Description : This is a PowerShell snap-in that includes Team Foundation Server cmdlets. PS H:\> get-command -pssnapin TfsBPAPowerShellSnapIn CommandType Name Definition ----------- ---- ---------- Cmdlet Get-MsiProductId Get-MsiProductId [[-ProductIndex] <Int32>] [[-Mo... Cmdlet Get-TfsDBServer Get-TfsDBServer [[-DBPath] <String>] [-Verbose] ... Cmdlet Get-TfsHealthPing Get-TfsHealthPing [-Verbose] [-Debug] [-ErrorAct... Cmdlet Get-TfsSqlData Get-TfsSqlData [[-ConnectionBuilder] <SqlConnect... thanks.

  Read the article

• sqlite3 problem..need help..urgently..HELP**

  - by summer

  - (void) hydrateDetailViewData { //if detail view is hydrated then do not get it from database if(isDetailViewHydrated) return; if(detailStmt == nil) { const char *sql = "select snapTitle, snapDesc from Snap where snapID =?"; if(sqlite3_prepare_v2(database, sql, -1, &detailStmt, NULL) != SQLITE_OK) NSAssert1(0, @"Error while creating detail view statement. '%s'", sqlite3_errmsg(database)); NSLog(@"SQLite= %d", sqlite3_step(detailStmt)); } if (sqlite3_step(detailStmt) == SQLITE_ROW)//execute sql statement on database, and make sure it executed properly. { self.snapDescription = [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 1)]; } looking at the above code, can someone tell me what's wrong and why is it that i can't get it to load on my detailview?i basically followed the tutorial on iphone sdk article..but yet i am having this don't know why error..need help urgently because i have been at this for days!!it's driving me crazy! i can even send my project if u guys need to take a look..help please!! Error msg: * Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[UIViewController _loadViewFromNibNamed:bundle:] was unable to load a nib named "DetailView"' 2010-03-15 16:35:55.202 Snap2Play[58213:20b]

  Read the article

• C# Web Reference and PHP

  - by Louis

  I am attempting to call a Web Service (created in PHP) from my C# application. I have successfully added the Web Reference in Visual Studios, however I cannot figure out exactly how to invoke the call to the web service. I have been following this tutorial: http://sanity-free.org/article25.html however when I try and compile I get a "The type or namespace name 'SimpleService' could not be found". My C# code is as follows: using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Text; using System.Windows.Forms; using System.IO; namespace inVision_OCR { public partial class Form1 : Form { public Form1() { InitializeComponent(); } private void translateButton_Click(object sender, EventArgs e) { // We need to snap the image here somehow . . . // Open up the image and read its contents into a string FileStream file = new FileStream("\\Hard Disk\\ocr_images\\test.jpg", FileMode.Open); StreamReader sr = new StreamReader(file); string s = sr.ReadToEnd(); sr.Close(); // Using SOAP, pass this message to our development server SimpleService svc = new SimpleService(); string s1 = svc.getOCR("test"); MessageBox.Show(s); } } } Any help would be appreciated.

  Read the article

• How to solve "catastrophic failure" with 32-bit COM component in SysWOW64\cscript or wscript

  - by kcrumley

  I'm trying to run a VBScript script that uses a 7-year-old 3rd-party 32-bit COM component on Windows Server 2008 R2, with the command-line 32-bit script host, SysWOW64\cscript.exe. When I call CreateObject on the class, it appears to be successful, but the very first time I try to use a property or method (I've tried several different ones) on the object, it gives me the "catastrophic failure". I have identical results with SysWOW64\wscript.exe, except, of course, that my error message comes in a msgbox instead of the command-line window. I think this has to do specifically with the 64-bit scripting hosts because of the following: The equivalent Classic ASP script, calling the same component and using 95% of the same code, works correctly on the same server, with IIS configured to support 32-bit COM. The same VBScript works correctly on a 32-bit Windows XP machine and a 32-bit Windows Server 2003 machine. The component fails in exactly the same way on my 64-bit Windows 7 machine. My Google searches for solutions to this problem have mostly turned up a lot of different problems that were solved by putting the COM component into a toolbar in Visual Studio. Obviously, that solution doesn't apply here. My questions are: Is there a core problem that is always behind a "catastrophic failure" from a Windows scripting host calling a COM component? Is there a place in a configuration snap-in, or in the registry, where I need to make a change similar to the change I had to make to the IIS Application pool to "Enable 32-bit Applications"? Is there a general place in the Server 2008 R2 Event Viewer that I should be looking, to see if there are any more details on the failure, in case it turns out to be specific to this component? Thanks in advance.

  Read the article

• Android: Creating a Scrollable Layout

  - by MD

  I'm trying to create a "scrollable" layout in Android. Even using developers.android.com, though, I feel a little bit lost at the moment. I'm somewhat new to Java, but not so much that I feel I should be having these issues--being new to Android is the bigger problem right now. The layout I'm trying to create should scroll in a sort of a "grid". I THINK what I'm looking for is the Gallery view, but I'm really lost as to how to implement it at the moment. I want it to "snap" to center the frame, like in the actual Gallery application. Essentially, if I had a photo gallery of 9 pictures, the idea is to scroll between them up/down AND side to side, in a 3x3 manner. Doesn't need to dynamically adjust, or anything like that, I just want a grid I can scroll through. I'm also not asking for anyone to give me explicit code for it--I'm trying to learn, more than anything. But pointing me in the right direction for helpful layout programming resources would be greatly appreciated, and confirming if it's a Gallery view I'm looking for would also be really helpful. EDIT: To clarify, the goal is to have ONE item on screen at a time. If you scroll between one item and the next, the previous one leaves the screen, and the new one snaps into place. So if it were a photo gallery, each spot on the grid would take up the entire screen size, approximately, and would be flung out of the viewable area when you slide across to the next photo, in either direction. (Photos are just an example for illustration purposes)

  Read the article

• Resizing and saving an image in WinMobile and .NET CF throws OutOfMemoryException

  - by devguy

  I have a WinMobile app which allows the user the snap a photo with the camera, and then use for for various things. The photo can be snapped at 1600x1200, 800x600 or 640x480, but it must always be resized to 400px for the longest size (the other is proportional of course). Here's the code: private void LoadImage(string path) { Image tmpPhoto = new Bitmap(path); // calculate new bitmap size... double width = ... double height = ... // draw new bitmap Image photo = new Bitmap(width, height, System.Drawing.Imaging.PixelFormat.Format24bppRgb); using (Graphics g = Graphics.FromImage(photo)) { g.FillRectangle(new SolidBrush(Color.White), new Rectangle(0, 0, photo.Width, photo.Height)); int srcX = (int)((double)(tmpPhoto.Width - width) / 2d); int srcY = (int)((double)(tmpPhoto.Height - height) / 2d); g.DrawImage(tmpPhoto, new Rectangle(0, 0, photo.Width, photo.Height), new Rectangle(srcX, srcY, photo.Width, photo.Height), GraphicsUnit.Pixel); } tmpPhoto.Dispose(); // save new image and dispose photo.Save(Path.Combine(config.TempPath, config.TempPhotoFileName), System.Drawing.Imaging.ImageFormat.Jpeg); photo.Dispose(); } Now the problem is that the app breaks in the photo.Save call, with an OutOfMemoryException. And I don't know why, since I dispose the tempPhoto (with the original photo from the camera) as soon as I can, and I also dispose the Graphics obj. Why does this happen? It seems impossible to me that one can't take a photo with the camera and resize/save it without making it crash :( Should I restor t C++ for such a simple thing? Thanks.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18  | Next Page >