Search Results

Search found 2976 results on 120 pages for 'timeout'.

Page 14/120 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• FTP timeout only the first time

  - by user1474681

  I'm using PureFTPd on MacOSX (Snow Leopard, not server version). When trying to access the FTP account from the outside via dyndns (e.g. using https://www.wormly.com/test_ftp_server) the connection always times out the FIRST time. When I try AGAIN in the next few seconds it works. What is this about? I have forwarded the ports to my apple router and tried disabling the OSX firewall as well. Thanks for any advice. Dennis

  Read the article

• psloggedon timeout question

  - by user60707

  I have a list of machine names from my network that I have put in a batchfile to run through the list and show me who is logged onto each. psloggedon \machineA psloggedon \machineB psloggedon \machineC psloggedon \machineD psloggedon \machineE psloggedon \machineF Psloggedon works fine, however when it hits a machine that isnt actually on the network, it hangs for a good 30 - 60 seconds before moving onto the next machine...I was just wondering if there was any way to speed this up so that if it hits a machine that isnt on the network, it moves onto the next machine in the list much quicker. I have read in other places that this could be possible by adding a ping -n loop into the command but im not sure how to get that to work? any ideas guys? Many thanks in advance. Jimmy

  Read the article

• IIS FTP service - download timeouts and restarts getting the data twice

  - by accel229

  We have an IIS FTP site on a Windows Server 2003 x64 machine. Application Layer Gateway service is disabled (so http://support.microsoft.com/kb/931130 does not apply). Windows Firewall service is disabled as well. Connection timeout for the FTP site (there is only one) is set to 1,200 seconds = 20 minutes. An external client can connect to the site, list directory contents and download small files. When a client attempts to download a large file (eg, if the download continues for 3 minutes, which is still under 20 minutes, but relatively long), the server sends all data, then the connection times out, the client issues REST / RETR commands attempting to restart the download since after the last byte (which I believe should succeed and receive exactly 0 bytes), and the server behaves as if the client tried to restart after byte 0, that is, it sends the entire file all over. Any ideas on how to fix this?

  Read the article

• ssh timeout issue connecting to an EC2 instance on OS X

  - by mamusr

  I am new to AWS and not a networking expert but curious to know more about it. I created a VPC with a public subnet only. Then i created an EC2 instance using an Ubuntu 14.04 64-bit pv AMI image (ami-e84d8480) as well generating the key pair needed to connect to it through ssh. I followed amazon's instructions to connect to an EC2 instance via ssh which did not work. Here is my attempted input and debug log: Running on OS X 10.9.4 user$ ssh -vvv -i key.pem [email protected] OpenSSH_6.2p2, OSSLShim 0.9.8r 8 Dec 2011 debug1: Reading configuration data /etc/ssh_config debug1: /etc/ssh_config line 20: Applying options for * debug1: /etc/ssh_config line 102: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to xxx.xxx.xxx.xxx [xxx.xxx.xxx.xxx] port 22. debug1: connect to address xxx.xxx.xxx.xxx port 22: Operation timed out ssh: connect to host xxx.xxx.xxx.xxx port 22: Operation timed out To attempt to resolve the issue: I enabled the SSH port. Tried different usernames other than ubuntu, like ec2-user and root. Initially set an inbound ssh rule in the security group to connect to only my ip address. When that did not work, i changed it to allow any ip to connect. But those actions did not fix the problem. Here are my guesses as to what i am missing in getting the EC2 instance connection to work. My etc/ssh_config file may be preventing the connection from taking place. I may have missed an important networking detail when setting up the VPC. I do not have a public ip address specified for the instance. I am connecting through the private ip address. My questions for the community: Am i going about it the wrong way connecting to the instance through the private ip address? if so, do i need to specify a public ip address for it to connect or some other method?

  Read the article

• SQL Server Express 2005 cannot connect

  - by jp

  hi all, I have a SQL Server Express 2005 install on a godaddy virtual terminal which currently is only connected to(locally with mgt studio) every few days or so. Every time i try to connect I get a cannot connect to SQL Server error and after a restart it I can connect just fine locally. I was wondering if there is a timeout setting or something that I am missing that I need to change so that if it is not connected to for a while it does not required a restart? any ideas? thanks!

  Read the article

• On boot firmware request for intel GMA 3100 chipset timing out

  - by Yannick M.

  I am currently in the process of installing a Gentoo linux box with a Vanilla 2.6.29-r5 kernel with gentoo-xen-kernel patches in order to run the Xen Hypervisor. After rebooting with the new kernel, the booting process seemed to hang on: [ 0.863005] platform microcode: firmware: requesting intel-ucode/06-0f-07 [ 60.863442] Microcode Update Driver: v2.00-xen <[email protected]>, Peter Oruba Apparently the firmware request times out after 60 seconds (/sys/class/firmware/timeout) and booting just continues. I have done some research and have found that on RHEL-4 this problem was related to the mount of /sys changed and the firmware.agent hotplug script couldn't parse the line correctly. However I am having some difficulty tracking down how to fix this on Gentoo. Any and all ideas are greatly appreciated! Thanks

  Read the article

• Connection timeout when trying to SSH

  - by dan

  The other day I tried to connect to my remote server via SSH as i always have. But now when I try to connect it just times out after about 60 seconds. I run service ssh start Which tells me that Job is already running: ssh. I then ran $netstat -tnlp Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:993 0.0.0.0:* LISTEN 1972/dovecot tcp 0 0 0.0.0.0:995 0.0.0.0:* LISTEN 1972/dovecot tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 2030/mysqld tcp 0 0 0.0.0.0:110 0.0.0.0:* LISTEN 1972/dovecot tcp 0 0 0.0.0.0:143 0.0.0.0:* LISTEN 1972/dovecot tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN 2157/perl tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 3028/sshd tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN 2273/master tcp6 0 0 :::80 :::* LISTEN 2618/apache2 tcp6 0 0 :::21 :::* LISTEN 2291/proftpd: (acce tcp6 0 0 :::22 :::* LISTEN 3028/sshd I am able to access subdomains on my site, and FTP, but don't have the ability to SSH or even ping remotely. Any thoughts?

  Read the article

• Random timeouts in IIS7

  - by Cor-Paul

  Hi, I have a weird problem which I think is caused by my IIS7 installation on Vista 64 bit. I have a bunch of AJAX calls and JS dynamic file loads (~30) in a local application, and I get random timeouts (or so it seems) in my browser. In Chrome it looks like the page just stops loading (no HDD activity), in Firefox/Firebug I can see that some of the files are being loaded but they never actually finish. When I reload the page the same occurs, but for (random) other files that must be loaded. When I try to load one of those JS files concurrently (so during the timeout in FF) in another browser, the file loads there. So I am pretty sure the request can be handled by IIS. I am thinking about a limit or so on simultaneous requests from the same browser which is not working correctly, but I am pretty clueless on how to solve this. Does anyone recognize this problem and know a solution? Thanks!

  Read the article

• ssh-agent key timeout with screen or tmux on bastion host

  - by Jericon

  Normally I have ssh-agent running, I ssh to my bastion host then open a tmux session and connect to other boxes through that. Key forwarding works for any sessions that I open from that point forward. If I resume my tmux session after closing terminal, sleeping my laptop, whatever, my key forwarding on my bastion sessions still work, as does forwarding on any new sessions. Existing ones don't work, though. I have a little thing in my bashrc that keeps key forwarding working when I resume tmux, but I am having trouble figuring out how to get it to keep working for sessions open within tmux. For example, I have bastion01, dbhost01, dbhost02, webhost01, and webhost02. If I open a connection to bastion01, start tmux there, and then connect to dbhost01 and webhost01 forwarding works. If I close that connection, reconnect and attach my existing tmux session, then add connections to dbhost02 and webhost02, key forwarding works on the 02 boxes, but does not on the 01. Please help!

  Read the article

• tcp msl timeout

  - by iamrohitbanga

  The following is given in the book TCP IP Illustrated by Stevens Quiet Time Concept The 2MSL wait provides protection against delayed segments from an earlier incarnation of a connection from being interpreted as part of a new connection that uses the same local and foreign IP addresses and port numbers. But this works only if a host with connections in the 2MSL wait does not crash. What if a host with ports in the 2MSL wait crashes, reboots within MSL seconds, and immediately establishes new connections using the same local and foreign IP addresses and port numbers corresponding to the local ports that were in the 2MSL wait before the crash? In this scenario, delayed segments from the connections that existed before the crash can be misinterpreted as belonging to the new connections created after the reboot. This can happen regardless of how the initial sequence number is chosen after the reboot. To protect against this scenario, RFC 793 states that TCP should not create any connections for MSL seconds after rebooting. This is called the quiet time Few implementations abide by this since most hosts take longer than MSL seconds to reboot after a crash. Do operating systems wait for 2MSL seconds now after a reboot before initiating a TCP connection. The boot times are also less these days. Although the ports and sequence numbers are random but is this wait implemented in Linux?

  Read the article

• tcp msl timeout implementation in linux

  - by iamrohitbanga

  The following is given in the book TCP IP Illustrated by Stevens Quiet Time Concept The 2MSL wait provides protection against delayed segments from an earlier incarnation of a connection from being interpreted as part of a new connection that uses the same local and foreign IP addresses and port numbers. But this works only if a host with connections in the 2MSL wait does not crash. What if a host with ports in the 2MSL wait crashes, reboots within MSL seconds, and immediately establishes new connections using the same local and foreign IP addresses and port numbers corresponding to the local ports that were in the 2MSL wait before the crash? In this scenario, delayed segments from the connections that existed before the crash can be misinterpreted as belonging to the new connections created after the reboot. This can happen regardless of how the initial sequence number is chosen after the reboot. To protect against this scenario, RFC 793 states that TCP should not create any connections for MSL seconds after rebooting. This is called the quiet time Few implementations abide by this since most hosts take longer than MSL seconds to reboot after a crash. Do operating systems wait for 2MSL seconds now after a reboot before initiating a TCP connection. The boot times are also less these days. Although the ports and sequence numbers are random but is this wait implemented in Linux? Also RFC 793 says that this wait is not required if history is maintained. Does linux maintain any history of used sequence numbers for connections to handle this case?

  Read the article

• L2TP over IPSec VPN with OpenSwan and XL2TPD can't connect, timeout on Centos 6

  - by Disco

  I'm setting up LT2p over IPSec on my Centos 6.3 fresh install. I have iptables flushed, permit all. Whenever I try to connect, i get a 'no reply from vpn' and nothi Here's my ipsec.conf file (Server is 1.2.3.4) : config setup nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off protostack=netkey conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=1.2.3.4 leftprotoport=17/1701 right=%any rightprotoport=17/%any My /etc/ipsec.secrets 1.2.3.4 %any: PSK "password" My sysctl.conf (appened lines) net.ipv4.ip_forward = 1 net.ipv4.conf.default.rp_filter = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.log_martians = 0 net.ipv4.conf.default.log_martians = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.icmp_ignore_bogus_error_responses = 1 Here's what 'ipsec verify' gives: # ipsec verify Checking your system to see if IPsec got installed and started correctly: Version check and ipsec on-path [OK] Linux Openswan U2.6.32/K2.6.32-279.19.1.el6.x86_64 (netkey) Checking for IPsec support in kernel [OK] SAref kernel support [N/A] NETKEY: Testing for disabled ICMP send_redirects [OK] NETKEY detected, testing for disabled ICMP accept_redirects [OK] Checking that pluto is running [OK] Pluto listening for IKE on udp 500 [OK] Pluto listening for NAT-T on udp 4500 [OK] Checking for 'ip' command [OK] Checking /bin/sh is not /bin/dash [WARNING] Checking for 'iptables' command [OK] Opportunistic Encryption Support [DISABLED] And I see xl2tpd is listening on 1701/udp : udp 0 0 1.2.3.4:1701 0.0.0.0:* 2096/xl2tpd

  Read the article

• Apache+FastCGI Timeout Problem

  - by Sadjad Fouladi

  Hi all. I've recently installed mod_fastcgi and Apache 2.2. I've a simple cgi script as below (test.fcgi): #!/bin/sh echo sadjad But when I invoke "mysite.com/test.fcgi" I see "Internal Server Error" message after a short period of time. The error.log file shows this error message: [Tue Jan 31 22:23:57 2006] [warn] FastCGI: (dynamic) server "~/public_html/oaduluth/dispatch.fcgi" has failed to remain running for 30 seconds given 3 attempts, its restart interval has been backed off to 600 seconds This is my .htaccess file: AddHandler fastcgi-script .fcgi RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^(.*)$ django.fcgi/$1 [QSA,L] I'm very confused, please help me! [Sorry for my poor English!]

  Read the article

• SSL timeout on some sites, across all browsers, on Mac OS X Snow Leopard

  - by dansays

  For the past several weeks, I've been receiving "Error 7 (net::ERR_TIMED_OUT): The operation timed out" when I attempt to connect to either Twitter or Paypal via SSL. I get this specific error in Google Chrome, but the same problem occurs in both Safari and Firefox. Other sites work fine, and other computers on my network can access these two sites. I have no firewall settings that would prevent me from accessing these sites over port 443. I notice that both Twitter and Paypal both have "Verisign Class 3 Extended Validation SSL CA" certificates. It is unclear whether this is related to the problem. In an effort to troubleshoot, I attempted to open the test sites referenced on Verisign's root certificate support page, which worked fine. Just to be sure, I downloaded and installed the root package file and installed all included Verisign certificates. No joy. I feel like I've hit a dead end. Any ideas? Update the first: I also cannot connect to FedEx.com, who also has a Verisign Class 3 Extended Validation cert. Update the second: Aaaaaaand it fixed itself. I did nothing. Or, I did something that worked, but in a delayed fashion. Frustrating, but a win is a win. I'll take it.

  Read the article

• How to configure autofs5 timeout on per-filesystem basis?

  - by Norman Ramsey

  Because of a show-stopping bug in Debian autofs 4, I just upgraded to autofs5. It is not honoring the timeout option in my auto.master file: /var/autofs/removable /etc/auto.removable --timeout=2 I use this map for thumb drives and so on; I don't want a general default timeout of 2 seconds. I did some digging and although the --timeout option worked in autofs 4, and it appears in some examples on the Web, it is not actually sanctioned (or even mentioned) in the documentation for the auto.master file. So I don't feel I can report the problem as a bug. How can I get autofs5 to timeout after 2 seconds only on designated filesystems? Update: I am using a Debian-packaged autofs5, version 5.0.4-3.2.

  Read the article

• Apache connection intermittantly times out on LAN

  - by jonescb

  I'm using Fedora 12 with Apache 2.2.14, and I was having this error on 2.2.13 as well. Even when I connect to my server over LAN, Firefox will occasionally time out while connecting. I can't figure out what is causing this. The error log isn't showing anything. I even cleaned the error log file, so that if something happened, it'd be a little easier to spot. But I'm still getting time outs, and nothing in the error log. Can anybody help me find what the problem is? Here is my httpd.conf Pastebin It's the default Fedora configuration; I've only changed the ServerName if I remember correctly. I'm pretty sure it's not the Timeout setting, because on LAN it should never time out. I don't believe it's a load issue either, I'm the only one connecting to it. I'm not an Apache expert, so if more information is needed I'll need some instructions on how to get that data.

  Read the article

• clients auto-lock feature for inactvity timeout not working

  - by Swaminathan Shanmugam

  In our sbs 2003 domain environment, the clients' pc's inactive for default period will be locked out automatically and only Ctrl+ Alt + Del & client password combination will unlock the client's pcs. Recently around 9 months before, all our client's pc's joined the new sbs 2011 but (usually all are locking with Win+L key combination manually)the auto lock feature is not working from the beginning onwards. Now only I am brought up with this issue by clients. Please help me set that option!

  Read the article

• Unable to connect to FTP - Connection timeout after MLSD

  - by Afrosimon

  So here is my problem, I'm absolutely unable to connect to a FTP server, in circumstances I've never seen before. Here is the situation : I get a "Connection timed out" just after the MLSD command. I usually use Filezilla, under Ubuntu, but to make sure the problem isn't related to this particular client I tried a few others : gftp on ubuntu and winscp and freeftp on windows 7. All the same result. Also made sure to try with Active or Passive modes. Same result. At this point I would be inclined to think there is something wrong with my current network (furthermore, according to a coworker the FTP server is OK). But I did check with http://ftptest.net/ and I am able to get the directory listing (which I'm not able to through a FTP client). So in the end the last thing I didn't tried is to go on another network, solution which seems would work, but wouldn't be very practical in the long run. And thus I guess there's something wrong with my router... but what could it possibly be? Note : I did try to register and post this question on filezilla's board first... but I can't create an account with a gmail nor hotmail account. WTF?

  Read the article

• psloggedon timeout question.

  - by user60707

  Hi guys, I have a list of machine names from my network that I have put in a batchfile to run through the list and show me who is logged onto each. psloggedon \machineA psloggedon \machineB psloggedon \machineC psloggedon \machineD psloggedon \machineE psloggedon \machineF Psloggedon works fine, however when it hits a machine that isnt actually on the network, it hangs for a good 30 - 60 seconds before moving onto the next machine...I was just wondering if there was any way to speed this up so that if it hits a machine that isnt on the network, it moves onto the next machine in the list much quicker. I have read in other places that this could be possible by adding a ping -n loop into the command but im not sure how to get that to work? any ideas guys? Many thanks in advance. Jimmy

  Read the article

• IIS FTP service - download timeouts and restarts getting the data twice

  - by accel229

  We have an IIS FTP site on a Windows Server 2003 x64 machine. Application Layer Gateway service is disabled (so http://support.microsoft.com/kb/931130 does not apply). Windows Firewall service is disabled as well. Connection timeout for the FTP site (there is only one) is set to 1,200 seconds = 20 minutes. An external client can connect to the site, list directory contents and download small files. When a client attempts to download a large file (eg, if the download continues for 3 minutes, which is still under 20 minutes, but relatively long), the server sends all data, then the connection times out, the client issues REST / RETR commands attempting to restart the download since after the last byte (which I believe should succeed and receive exactly 0 bytes), and the server behaves as if the client tried to restart after byte 0, that is, it sends the entire file all over. Any ideas on how to fix this?

  Read the article

• Kill ssh background process after disconnect / timeout?

  - by keflavich

  I frequently use ssh tunnels to access VNC sessions on remote machines, but this is on my laptop so the connections break when I put it to sleep for the night. If I then try to re-open the connection in the morning, I have to manually kill the ssh session, otherwise I get this error: bind: Address already in use channel_setup_fwd_listener: cannot listen to port: 1202 Could not request local forwarding. The SSH command I'm using is this: ssh -N -C -f -L 1202:localhost:5900 name@server What's the best way to have the ssh tunnel die when it disconnects? Or reset?

  Read the article

• SSH Server Timeout on port 22 but not on higher port

  - by mikelberger

  If I run an SSH server on my Windows 2008 server box on the default port 22 I always get Operation Timed Out on the client. If I run it on another port (say 2222) it works fine. I've opened up the firewall. Netstat shows that the server is listening on the correct port. I have used two different Windows SSH servers (freeSSHd and WinSSHD) and they both have the same result. What else could be causing the difference between running the SSH server on port 22 versus port 2222?

  Read the article

• Why are my log in times taking so long in Linux?

  - by Jamie

  In recent weeks, login times on my Ubuntu server have started timing out; both through SSH and the local command line console. Examination of the /var/auth.log yields nothing interesting. How can I diagnose long log in times on my Ubuntu server? I should mention, also, that no updates have been performed since the problem has started, and that the /, /boot/ and /usr/ file systems are mounted as readonly. [Edit] This is a stand alone machine, so it doesn't authenticate with Active Directory, LDAP etc. Also, the login prompt is responsive, as is the password prompt. Upon typing the password then CR, I'll timeout. After four a five tries, I will be able to login, although I'm worried this will start taking longer.

  Read the article

• Timeout ssh sessions after inactivity?

  - by Insyte

  PCI requirement 8.5.15 states: "If a session has been idle for more than 15 minutes, require the user to re-enter the password to re-activate the terminal." The first, and most obvious, way to deal with ssh sessions that are idling at the bash prompt is by enforcing a read-only, global $TMOUT of 900. Unfortunately, that only covers sessions sitting at the bash prompt. The spirit of the PCI spec would also require killing sessions running top/vim/etc. I've considered writing a */1 cron job that parses the output of "/usr/bin/w" and kills the associated shell, but that seems like a blunt instrument. Any ideas for something that would actually do what the spec requires and just lock the terminal? I've looked at away and vlock; they both seem great for voluntarily locking your terminal, but I need a cron/daemon task that will enforce locking.

  Read the article

• MySQL Procedure causing Dead Lock

  - by Phanindra

  I am using MySQL server 5.1.45. And I am having a procedure with huge business logic. With less number of invocation of this procedure, my application is working fine, but when the number of invocations are getting increased this procedure is throwing Lock wait timeout exception. My Question is will Procedure creates temporary tables dynamically..? As in my procedure I am using Truncate statement which may cause to release all transactions. I am not DBA, please help me out of this.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >