Search Results

Search found 12899 results on 516 pages for 'usb boot'.

Page 14/516 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

  • Ubuntu 11.10 loads from live usb fine, but boots to black screen from harddrive. Why?

    - by Estel
    A few days ago I had a hard drive failure, which was running Windows XP (32-bit) just fine. The second hard drive in my computer held a few unimportant files, so I formatted it in the Ubuntu setup and installed 11.10 without a hitch. I had been using it for about a week, but decided to install Windows 7 (64-bit) in order to utilize Networking with my home server (running Windows Server 2000). My system is 64-bit based, and thus I had no problems installing other than a basic RAM error that required me to remove my RAM down to a single stick. I played with the settings in Windows 7 for around an hour before I shut down. After reinstalling the RAM, Windows 7 would not boot. In this, I then assumed that something about my system was rejecting Win7 and I reinstalled Ubuntu. However, now Ubuntu (11.10) boots into black screen, and I've already attempted activating the grub menu with the shift key, and following steps listed here: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen but nothing seems to work. I've reinstalled twice now, with the same result each time. Now, the very odd part about this whole scenario is that the USB I installed from has no problems booting as a live USB. This puzzles me greatly, because the hard drive boots straight to black screen and the live USB loads normally. At this point, my only theory is that the boot sector of the hard disk was somehow corrupted with Win7, and that Ubuntu was unable to completely write through. I used Darik's Boot n Nuke to wipe the drive, but was met with an error, this also puzzles me because the hard disk has no promblems reading or writing. Any suggestions/comments are appreciated. If you have a theory, I will be more than happy to oblige. Additional information: Intel Core2 Duo e6400 2.13GHz nVidia GeForce 7-series (7900 GS) 4 GB DDR2 333MHz (2x 2GB) Dell XPS 410 BIOS Revision 2.5.3

    Read the article

  • 3G USB Modem Not Working in 12.04

    - by Seyed Mohammad
    When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

    Read the article

  • How to install Grub2 under several common scenarios

    - by Huckle
    I feel the community has long needed a clean guide on how to install Grub2 under a a few extremely common scenarios. I will accept answer as solved when it has one section per scenario and assumes nothing other than what is specified. Please add to the existing answer, wiki style, keeping to the original assumptions. Rules: 1. You cannot, at any point in the answer, invoke Ubiquity (the Ubuntu installer). 2. I strongly recommend not using any automatic boor-repair tools as they're not very educational Scenario 1: Non-booting Linux OS, No boot partition, Fix from Live CD Setup: /dev/sda1 is formatted ext* /dev/sda2 is formatted linux_swap /dev/sda1 doesn't boot because MBR is scrambled and /boot/* was erased Explain: How to boot to a Live CD / USB and restore Grub2 to the MBR and /boot of /dev/sda1 Scenario 2: Non-booting Linux OS, Boot partition, Fix from Live CD Setup: /dev/sda1 is formatted fat /dev/sda2 is formatted ext* /dev/sda3 is formatted linux_swap /dev/sda2 doesn't boot because the MBR is scrambled and /dev/sda1 was formatted Explain: How to boot to a Live CD / USB and restore Grub2 to the MBR and /dev/sda1 and then update the fstab on /dev/sda2 Scenario 3: Install on to thumb drive, Booting various OSes, From Linux OS Setup: /dev/sdb is removable media /dev/sdb1 is formatted fat /dev/sdb2 is formatted ext* /dev/sdb3 is formatted fat The MBR of /dev/sdb is otherwise not initialized You are executing from a Linux based OS installed on /dev/sda Explain: How to install Grub2 on to /dev/sdb1, mark /dev/sdb1 active, be able to chose between /dev/sdb2 and /dev/sdb3 on boot. Scenario 4: (Bonus) Install on to thumb drive, Booting ISO, From Linux OS Setup: /dev/sdb is removable media /dev/sdb1 is formatted fat /dev/sdb1 contains /iso/live.iso /dev/sdb2 is formatted ext* /dev/sdb3 is formatted fat The MBR of /dev/sdb is otherwise not initialized You are executing from a Linux based OS installed on /dev/sda Explain: How to install Grub2 on to /dev/sdb1, mark /dev/sdb1 active, be able to chose between /dev/sdb2, /dev/sdb3, and /iso/live.iso on boot.

    Read the article

  • Boot Ubuntu on USB flash drive in Mac OS X 10.4... and Ubuntu

    - by thetester
    I would like to create an OS-agnostic installation of Ubuntu on a flash drive, that boots under Ubuntu and under Mac OS X. Ideally the process would look like: Install Ubuntu 11.10 (or 12.04 if necessary) on a flash drive (from Ubuntu). Boot from flash drive (on PC) to modify files, etc. Plug drive into Mac with OS X 10.4, boot to Ubuntu from it, and use. I have an 8G flash drive. What is the sanest way to do this?

    Read the article

  • How To Boot with "mem=1024m" Argument using GRUB - Ubuntu 10.04

    - by nicorellius
    I am still working on this question. This new one is a different question so I thought it would be good to post a new question. Is this the proper protocol or should I have just edited the other question? I'm running Ubuntu 10.04 with the kernel 2.6.32-22-generic on a Toshiba Satellite laptop. When I enter the GRUB menu (I have Ubuntu 9.10 installed as well), I can choose which kernel to boot. I use scroll down to the one I want and press "e" and I expect to be able to enter mem=1024m and force the kernel to use this much memory. But when I run cat /proc/meminfo or look in the process manager after booting wth this argument I still see all the RAM: ~2 GB. Am I using this boot argument incorrectly? The boot configuration (before I add anything) looks like this: insmod ext2 set root=(hd0,1) search --no-floppy --fs-uuid --set 10270f21-1c42-494b-bd3f-813c23f6d\ 518 linux /boot/vmlinuz-2.6.32-22-generic root=UUID=10270f21-1c42-494b-b\ d3f-813c23f6d518 ro quiet splash initrd /boot/initrd.img-2.6.32-22-generic The way I did this was that I added the mem=1024m after the last line and pressed Ctrl+x (Emacs save and boot the kernel) and the system booted. I tried adding mem=1024m to the end and the beginning of this list and it appeared to not change the RAM allocation.

    Read the article

  • USB to LPT adapter?

    - by Dave
    I'm bummed out, pretty much all of our computers here lack parallel ports. I have an EETools ChipMax programming tool that has one of the old-school Centronics connectors on the back. I figured that someone must make a USB to LPT adapter. Sure enough, I found one from iogear, the GUC1284B that is a USB to Parallel Printer cable. Note the boldface on the Printer. It must connect to a printer -- it isn't some generic USB to parallel interface, unfortunately. Does anyone here know of an adapter that works for parallel devices that aren't printers? I'd hate to have to buy a USB version of the ChipMax when I don't need to use it very much.

    Read the article

  • Installing Windows XP sp3 into USB 2.0 WD 320Gb Hard Drive

    - by NetKabuki
    I have a HP laptop with support for 3 USB 2.0 ports. I also have a clean 320Gb WD USB 2.0 drive. The HP can boot from USB (Bios options). I used the install disk (XP SP3 bootable) and after a few stutters, was actually able to load up a partition on the 320Gb drive with Windows. I cannot consistently get the system to boot up off the USB drive. I am able to drop Ubuntu on that same WD drive and boot up. I can even get Grub2 on Ubuntu to recognize the Win OS. But booting the Win OS is an impossible task. What can I do differently - if anything?

    Read the article

  • Windows 7 boot from downloaded .iso

    - by Travis
    Downloaded Windows 7 .iso off the net and want to install from USB key on old laptop (previously/still running XP) that has no CD/DVD drive. Here's what I've got so far: Read the instructions in this post: http://kmwoley.com/blog/?p=345 , which were quite straight forward and clear. Properly formatted USB key with another laptop (this one running vista), also with no DVD drive wasn't sure how to make the USB bootable, since my .iso was downloaded and I have no DVD drive. Any help would be much appreciated!!

    Read the article

  • Max length of a USB Cable?

    - by Click Ok
    I want to use a very long USB cable to, for example, place a webcam in a different room. The max length that I found was 5 meters. What the max length of a USB cable and... What the max length that I can get using USB extension cables? Thanks in advance!

    Read the article

  • Can't access USB drive anymore

    - by marie
    I have a 32 GB Lacie Cookey USB flash disk that doesn't show in the Computer window but it's visible as a device. cmd > diskpart DISKPART> list disk Disk ### Status Size -------- ------------- ------ Disk 0 Online 149 G Disk 1 No Media 0 DISKPART> select disk 1 Disk 1 is now the selected disk. DISKPART> clean Virtual Disk Service error: There is no media in the device. It also appears in the Disk Management tool, but the box is empty. Is there anything I can do or is it dead? ............................................................ output from ChipGenius: Description: [F:]USB Mass Storage Device(LaCie CooKey) Device Type: Mass Storage Device Protocal Version: USB 2.00 Current Speed: High Speed Max Current: 200mA USB Device ID: VID = 059F PID = 103B Serial Number: 070535924B170C18 Device Vendor: LaCie Device Name: CooKey Device Revision: 0100 Manufacturer: LaCie Product Model: CooKey Product Revision: PMAP Controller Vendor: Phison Controller Part-Number: PS2251-67(PS2267) - F/W 06.08.53 [2012-09-26] Flash ID code: 983AA892 - Toshiba [TLC] Tools on web: http://dl.mydigit.net/special/up/phison.html

    Read the article

  • Make a bootable USB drive that can install both Windows XP and Ubuntu

    - by Utkarsh
    I have ISO images for both Ubuntu and Windows XP. I want to host both of them on a USB drive so that I can install either without needing installation CDs (I don't have a CD drive). How can I do that? SO, I want to have both Windows XP and Ubuntu on my USB Drive so that i could install any one of tem just from a USB. I do not have CD Drive thats why i wanna do that. I have ISO image of both ubuntu and windows xp

    Read the article

  • How to make a bootable USB drive out of a bootable DVD or CD

    - by Svish
    Is there a "universal" way of how you can make a bootable USB drive out of a bootable dvd or cd? What makes a USB drive bootable? What makes a dvd and cd bootable? For example there is a program called UNetBootin which can make bootable USB drives, but seems like it only works with various linux distributions. (Tried it with a Win7 image and the SystemRescueCD, which didn't work so well...). Main reason I ask is that I have a Support DVD which came with an Asus EEE, and it of course doesn't have an external dvd drive. So I am curious if I can sort of move that dvd over to a USB drive so that I can use it without buying one. Not asking just specifically about this one case though, I am curious to know a bit more about this in general. So, if you have a general bootable DVD or CD (Or a DVD or CD image for that matter), could be linux distro, windows install disk, support disks, etc., is it possible to "move" it over to a USB drive and make that work like the DVD or CD did? (Being bootable and all).

    Read the article

  • Intermittent USB 3.0 access - How do I troubleshoot?

    - by Billy ONeal
    I've got a WD Passport hard disk with "superspeed" USB 3.0 support. When I use my USB 3.0 flash drive (this is a Lenovo X220 laptop), USB 3.0 consistently works. But when I use the passport drive, almost without fail the connection drops to USB 2.0. Touching the cable seems to immediately trigger the problem, but it seems to happen on its own though. I've got another cable on order right now... but is it likely the cable's the issue here? Is there anything else I can check?

    Read the article

  • Can I format a usb stick on windows xp, in HFS+ format, and make the usb stick mac os x bootable?

    - by user717236
    My Intel Mac OS X computer is corrupt and I feel, at this point, I need to perform a fresh install of the OS. It consistently and automatically logs out, right after I log in. I tried logging in as the root. I tried safe boot and it wouldn't load. Anyway, the point is I want put the Mac OS X installer on a USB thumb drive and have it boot up on the Intel Mac OS X computer. Unfortunately, the computer is inaccessible, as I mentioned above. So, I have a Windows XP machine that I'm using and attempting to create a bootable USB thumb drive that's compatible with Mac OS X. I have tried transmac, macdrive, and paradox for windows -- all of which proved unable to format the usb stick in HFS+. How do I know this? Well, even though the Transmac reports that's been formatted to HFS+, Computer Management in Windows says otherwise: I even put the installer on the usb drive, after transmac reportedly formatted it properly, and the mac os x computer didn't even recognize that a USB thumb drive was inserted, via pressing the option key at boot-up time. I'm not sure what the problem is and how to actually format the drive. Can anybody offer any help? I would appreciate it. Thank you.

    Read the article

  • Is it possible to connect an internal USB 3 card reader in a computer with only USB 2?

    - by Grzenio
    I would like to buy an internal flash card reader. There are now loads of USB 3 reader, however I still have an USB 2 system. Would it be possible to connect the new reader to the old USB port on the motherboard? I understand that I will not be able to take advantage of having the faster reader with the old motherboard, but I am planning an upgrade next year and I would like to avoid having to upgrade the card reader as well...

    Read the article

  • "Boot Error" message when booting Ubuntu 9.10 from USB sticks (Occurs only on 1 PC)

    - by xeross
    Hey, Since today suddenly both my USB ubuntu installations (2 different USB sticks) try to boot and nothing loads but all I see is a message saying "Boot Error". When I press space it continues booting from the main hard drive. I tried reinstalling ubuntu on the USB stick but same error. This only happens on 1 computer and started happening today, before it worked just fine. Any idea what's causing this ? Regards, Xeross

    Read the article

  • USB port not working

    - by sharza
    Everytime I put pendrive in the USB port(all ports in my computer) it doesnt work especially when plug the USB Flash Drive, but after several hours it work again. But When I try to open this pen drive data on other computers, I'm able to open & work ... So definitely there is no problem with my pen drive. and I've enabled USB keyboard & mouse in Bios. I using windows xp and using USB 2.0 Please help ...

    Read the article

  • Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

    - by user93353
    I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

    Read the article

  • Hard-drive will randomly fail to load GRUB. Booting a live USB/CD fixes the issue temporarily

    - by Usagi
    I am running 12.04 64-bit and am dual booting with Win7, for full disclosure, although I suspect that has nothing to do with my problem. Occasionally the boot-loader(GRUB) will fail to load and I will be presented with a black screen with a single blinking line. There is no apparent pattern although I suspect there is one and it is related to a program I am running. This has happened to me eight out of ten power cycles now and I can fix it consistently, however, I have no idea why it happens. My current fix is to boot a live CD (I've tried both KNOPPIX and Ubuntu with the same result) and that's it. Somehow booting with the live CD is enough to "wake-up" my hard drive. I then reboot and GRUB magically appears again. So what is going on? Is it possible that a program is corrupting my MBR and the live CD is restoring it? How can I narrow down the possibilities? Thanks. Additional: This is still a problem. I'm convinced now that it is not hardware related as I've spent the last month and several boot cycles on Windows without a hiccup. Recently when I started using Ubuntu again the problem started again. I am more interested in figuring out what is going on rather than actually fixing the problem. Are there any tools, logs, etc. I can use to unravel this mystery?

    Read the article

  • Windows 8 changes GRUB2 in every boot!

    - by yxd
    I've installed Win8 and Ubuntu 12.10 both UEFI style (win8 first then ubuntu). GRUB2 shows me Both Ubuntu and Win8 entries. If I boot into Ubuntu is fine. I could reboot anytime I will see GRUB2 unchanged. The story changes when I Boot into Win8. When I boot to Win8 using GRUB2 it takes me to the Windows Boot manager (which only has the Windows 8 entry). I hit Windows and it boots fine. When I reboot, there's no GRUB2 nor Win loader. It has no boot loader. I boot a liveCD and download boot-repair and everything is back. It's a never ending cycle. Is GRUB2 supposed to load the Win boot loader? What can I do to fix it?

    Read the article

  • HP ProBook 4720s UEFI boot only manually into 12.04

    - by HainjeDAF
    I'm trying to get UEFI boot on my ProBook 4720s. Because I swapped the HDD for a SSD I had a blank canvas to start. The 12.04 Live DVD refuses to boot into UEFI, as do Alternate and desktop CD's. However, when I make a 16Gb flashdrive into a live FS using the bootdisk tool in ubuntu, I can boot from USB, manually into UEFI mode. It even sidesteps to DVD as medium when I boot from USB with 12.04 Live DVD present. I installed a GPT partitiontable with part 1, label EFI, fs FAT32, flag BOOT, mounts at /boot/efi part 2, label Linux-ROOT, fs ext4, no flags, mounts at / part 3, label Linux-SWAP, fs swap, no flags, mounts as swap So far, My system refuses to boot from harddrive by itself. I have to select "Boot from EFI file" and manually browse to (HD0,GPT1)\EFI\ubuntu\grubx64.efi any other option ends in "no system disk, please insert boot disk" I tried installing BURG, but that merely enforces non-efi boot. I tried most of the solutions I could find, but one says \EFI\grub\grub.cfg next says \EFI\ubuntu\ubuntu,cfg I'm confused and getting frustrated. How do I correctly install Ubuntu 12.04 in UEFI mode on this machine???

    Read the article

  • Must go through Windows Boot Loader to get to Grub

    - by Zach
    I just installed a fresh copy of Precise alongside Windows 7. I have to separate 750GB hard drives; /dev/sda holds the Windows partitions and /dev/sdb holds the Ubuntu partitions. Other than that, these are fresh installs of both Windows 7 and Ubuntu 12.04. Whenever I boot, Grub doesn't load, instead it goes to a black screen with a single blinking (horizontal bar) cursor in the top right corner. However, if I boot, hit escape right as the BIOS/POST screen finishes up, see the Windows Boot Loader and hit escape to make it go back to the BIOS screen. After the BIOS screen, grub shows up and everything functions normally; I can boot into Ubuntu or Win7. I don't want to have to do the Escape, Escape, Wait, Boot trick every time. I have no idea what would be wrong or what information I could give you guys to help diagnose. I have run a sudo update-grub and it found everything normally. I tried adding nomodeset flag in the /etc/default/grub line GRUB_CMDLINE_LINUX_DEFAULT which searching around made me think might work. Thoughts on what I could do to fix this? EDIT: I've tried changing the boot order so that both drives in the BIOS (both are labeled as "Internal HDD") have had a try booting first. I think the problem may be that every time I boot, the BIOS boot order is different... and I have to reset it. It seems to not be stable... but I'm not sure how to go about fixing that either. The machine has both traditional BIOS and UEFI. It came standard in "Legacy" mode; so it is currently set to boot through Legacy mode. I've reinstalled Ubuntu now, and now if I hit escape at the end of the BIOS/POST startup screen, it takes me to GRUB menu. Otherwise it automatically loads Windows. It seems like GRUB is now the acting bootloader, it just doesn't automatically start that unless I ask it to open a bootloader. In my other machines, it has always automatically started at the end of BIOS/POST. EDIT2: Using gparted, I just looked at my partitions, it would seem that my linux-swap partition is currently flagged as the boot partition for my Ubuntu install. I currently only have 2 partitions: one of "ext4" with a mount point of "/" and flag " "; and the "linux-swap" with mount point " " and flag "boot." If I change the boot flag to be on "/," it does not reliably solve the problem. After 10 boots: 2 Booted successfully to GRUB 5 Booted directly to Windows 7 3 booted to the black screen with the cursor and hung there Further research makes me think this is an issue of the BIOS not reliably booting hard drives in the same order or not finding both hard drives. If I ask it to create a "boot menu" sometimes it has 2 entries for "Internal HDD," sometimes 1. Also the list it creates changes order every time I bring it up; so it is not following a consistent boot sequence. Will report back if this is not an issue with GRUB.

    Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >