Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 14/361 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• Still no wireless after b43 with Dell Inspiron 1525 (Ubuntu 12.04)

  - by DanielleN

  So I followed the instructions here http://ubuntuforums.org/showthread.php?t=1974006 about how to solve this issue. It worked for a bit and then stopped. After doing a modprobe I could at least see my network and click on it but it would not connect (I can always see it if I look under the listed wireless networks under VPN Connections, however). I'm thinking, from what I read at least, the issue might be that my wireless switch was on during those first steps. Do I now have to undo the b43 install and do it again? Or is there something else I could try? I just made the switch to Linux yesterday, so I am hesitant at this point to mess with anything on my own. I should note now that it was installed by someone who knows what they are doing, so we are all good on that front.

  Read the article

• Slow internet connection with a Digicom Wireless 11n 300m (rt2800)

  - by beboka8

  After upgrading to ubuntu 11.10 the speed of my internet connection has considerably reduced. I surf on internet using a wireless usb adapter Digicom Wireless 11n 300m which works with rt2800usb driver. The fact is, on the installation cd there's no tracks of that driver but instead of it there is another one called rt2870 which I tried to load using ndiswraper, but it did not recognize any hardware. I'm not sure the solution of my problem is simply changing the driver, but I have no other ideas. Can anyone help me?

  Read the article

• Windows Wireless Drivers - Install

  - by Justin Y.

  I have nearly ended my journey of making a dual-boot windows xp and ubuntu computer. Along with version 12.04, came the problem with my NetGear WNDA3100v2 wireless adapter. It wasn't compatible. My last step in my adventure is to install the software called Windows Wireless Drivers. I have internet access on my laptop and a flash drive. It would be preferable to receive a link to this program, because I see no link on the website, and I can't download it from the Ubuntu Software Center. Thanks.

  Read the article

• Setting up wireless drivers in Ubuntu 9.10?

  - by xdya

  I've just installed ubuntu to a notebook, deleting the windows xp that was installed before, so now nothing works I couldn't solve the problem of getting the blank screen with the versions 12.. and 10.. so now there is 9.10 installed, which works fine. Well, it boots up at least. I can't get working the drivers though. I'm totally new to linux, and I've read in some forums that in this version you have to install all of them yourself, because the system won't detect them automatically. Therefore I tried to find the drive for my wireless card, but actually I have no clue how to get it work. Could someone please help me out? So here are the specs: System installed as mentioned: Ubuntu 9.10 Computer: Acer Aspire 3100 Wireless according to laptop specs: 10/100 Fast Ethernet, Wake-on-LAN ready, Acer InviLink™ 802.11b/g Wi-Fi CERTIFIED I would really appreciate some detailed description to setting up my internet Thanks!!

  Read the article

• Wireless hardware is not getting switched on in 12.04

  - by user89733

  I have recently installed ubuntu 12.04 in sony vaio VPCEH. And updated all the available updates through update manager. When i switch on the bluetooth/wireless (hardware switch), only the bluetooth is turning on. For wireless, it shows as "hardware disabled". P.S: It was working fine few days before. Suddenly It is not turning on. i just get an answer for this question while googling. just enter the following command in the terminal. "sudo rfkill unblock all" This will unblock all hardware ports. that's it!!!!!! :) It works,..

  Read the article

• Newly installed DIR-615 - how to connect to the wireless?

  - by JK123

  I've just installed a D-Link DIR 615, but can't figure out how to connect to the wireless.. When I double click my wireless icon in the tray, it does show the new network. Its starts the "WiFi protected setup wizard" and the first thing it asks for is the "Device Ownership Password". I have no idea what that is - I've tried the PIN and the router password. On the next page it says: SSID: _(name)__ Security type: _wpa2 personal aes ccmp_ Password: _some long key that is not what I entered during router setup_ I change the key to the one I created when setting up the router. I've also tried leaving the key as it is shown in the dialog. But it does not connect either way. All it says is "Configuration failed" So how do I connect to the new wireless network??

  Read the article

• Wireless Activity Monitoring for PCI DSS Compliance

  - by dkusleika

  In an effort to be PCI DSS compliant, I took a trustkeeper.net questionnaire. I failed the question that asks Is the presence of wireless access points tested for by using a wireless analyzer at least quarterly or by deploying a wireless IDS/IPS to identify all wireless devices in use? (SAQ #11.1) My only wireless access point is outside my firewall, so even if you cracked my wireless you couldn't get inside my domain (unless you crack that too). My firewall doesn't have IPS and I couldn't tell if it had IDS. I looked around for a wireless analyzer, but what I found was $500, which is a little pricey for my size business. And even if I got it, I'm not sure I would understand what it tells me. Surely there are smaller/less sophisticated businesses that take credit cards and have solved this. My questions are: What are the risks if someone were to crack my wireless? (Could they read all internet traffic? Just wireless traffic? Just use my internet connection?) And what is the best/cheapest way to test my connection point quarterly? Should I buy the $500 analyzer? Domain is Windows Server 2000. Firewall is Sonicwall Pro 2040. Router is 8 port D-link.

  Read the article

• wireless to wired internet

  - by Mark T

  My wife uses an old computer which doesn't really like having an internet connection via a USB wireless adapter. I've tried several, and none have been satisfactory. The connection gets dropped often and it is frustrating for her. A wireless card also had the same trouble. Repositioning the computer made no difference. (Two laptops, nearby, connect just fine and stay up, so it isn't the router.) However, the computer always worked well when I had an Ethernet cable connected to it. I know there is a box which will connect to my wireless network and provide an Ethernet cable connection. But the terminology used is so complex, I can't tell what it is I really need. In case that wasn't clear, here it is in different words: What I need is just the opposite of a wireless router. My wireless router takes my cable modem's Ethernet connection and makes it available to wireless clients. What I want is a box which is a wireless client to my wireless router and provides an Ethernet cable connection that I can connect to any device. I need to know the right name for a box with such capabilities. If you know of some inexpensive examples, that would also be helpful. I'm running a wireless G network with a Linksys Router.

  Read the article

• Crash after plugging in the Logitech H600 wireless transmitter

  - by SneezyDinosaur

  I recently bought the Logitech H600 Wireless Headset. When I plug in the USB wireless transmitter, Ubuntu 12.04 LTS crashes. How does that come and what do you suggest me to do? Same problem here, as soon as the H600 headset is plugged in 12.04 crashes. Relevant snip from /var/log/Xorg.failsafe.log is below, complete log can be found as a gist [ 2676.496] (**) Logitech Logitech Wireless Headset: Applying InputClass "evdev keyboard catchall" [ 2676.496] (II) Using input driver 'evdev' for 'Logitech Logitech Wireless Headset' [ 2676.496] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 2676.496] (**) Logitech Logitech Wireless Headset: always reports core events [ 2676.496] (**) evdev: Logitech Logitech Wireless Headset: Device: "/dev/input/event16" [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Vendor 0x46d Product 0xa29 [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found absolute multitouch axes [ 2676.496] (--) evdev: Logitech Logitech Wireless Headset: Found keys [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as mouse [ 2676.496] (II) evdev: Logitech Logitech Wireless Headset: Configuring as keyboard [ 2676.496] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.3/input/input16/event16" [ 2676.496] (II) XINPUT: Adding extended input device "Logitech Logitech Wireless Headset" (type: KEYBOARD, id 10) [ 2676.496] (**) Option "xkb_rules" "evdev" [ 2676.496] (**) Option "xkb_model" "pc105" [ 2676.496] (**) Option "xkb_layout" "us" [ 2676.497] (II) evdev: Logitech Logitech Wireless Headset: initialized for absolute axes. [ 2676.497] Backtrace: [ 2676.497] 0: /usr/bin/X (xorg_backtrace+0x37) [0xb7698637] [ 2676.497] 1: /usr/bin/X (0xb7510000+0x18c3ba) [0xb769c3ba] [ 2676.497] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb74ed40c] [ 2676.497] 3: /lib/i386-linux-gnu/libc.so.6 (0xb7155000+0x135d32) [0xb728ad32] [ 2676.497] 4: /usr/bin/X (XIChangeDeviceProperty+0x16c) [0xb7630b0c] [ 2676.497] 5: /usr/lib/xorg/modules/input/evdev_drv.so (0xb3f4a000+0x634e) [0xb3f5034e]

  Read the article

• Wifi installation issues with a Sitecom 300N x2 Wireless Network dongle

  - by SlyrNemesis

  Linux newbie here, anyway so here is the problem, I run Ubuntu 10.10 and I have a Sitecom 300N x2 Wireless Network dongle with chipset 8192SU, I used ndiswrapper to install my Windows Wireless driver because Sitecom doesn't have a linux driver, it says hardware present but it doesn't find any Wireless networks, nor does it connect to one. What can I do? The command "dmesg | grep ndis" gave this output in the terminal: [ 9.999954] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 11.111901] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferAndNetBufferList' [ 11.111973] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists' [ 11.112099] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver' [ 11.112161] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateMdl' [ 11.112220] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver' [ 11.112280] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool' [ 11.112339] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool' [ 11.112399] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeMdl' [ 11.112457] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMAllocatePort' [ 11.112515] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMNetPnPEvent' [ 11.112573] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMFreePort' [ 11.112631] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete' [ 11.112780] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes' [ 11.112848] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx' [ 11.112946] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx' [ 11.113017] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete' [ 11.113112] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority' [ 11.113200] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem' [ 11.113271] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem' [ 11.113342] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem' [ 11.113413] ndiswrapper (import:233): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList' [ 11.113481] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionBind' [ 11.113547] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionBindClass' [ 11.113613] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionUnbindClass' [ 11.113680] ndiswrapper (import:233): unknown symbol: WDFLDR.SYS:'WdfVersionUnbind' [ 11.113742] ndiswrapper (load_sys_files:206): couldn't prepare driver 'net8192su' [ 11.148888] ndiswrapper (load_wrap_driver:108): couldn't load driver net8192su; check system log for messages from 'loadndisdriver' [ 11.365200] usbcore: registered new interface driver ndiswrapper [ 12.818573] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.819183] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.819796] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.820505] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.821115] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.821726] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.822339] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.822948] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.823560] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy [ 12.824204] Modules linked in: snd_wavefront snd_emu10k1(+) snd_cs4236 snd_usb_audio snd_wss_lib snd_opl3_lib snd_ac97_codec ac97_bus nouveau(+) snd_pcm i915 snd_usbmidi_lib snd_util_mem snd_page_alloc snd_hwdep snd_mpu401 snd_mpu401_uart snd_seq_midi snd_rawmidi ttm snd_seq_midi_event drm_kms_helper snd_seq ppdev snd_timer snd_seq_device drm ndiswrapper snd parport_pc emu10k1_gp intel_agp ns558 gameport soundcore i2c_algo_bit shpchp lp video output agpgart parport usbhid hid 8139too 8139cp mii floppy

  Read the article

• Wireless connection works but the internet is too slow to use in Ubuntu 11.04

  - by Garrin

  The internet is so slow as to be unusable. And I'm not being picky. Even after minutes I can't get my Google home page to load. I tried installing a package through apt-get and was getting rates between 0 and a few hundred bytes/s. That's bytes, not kilobytes! Mostly 0 however (no exaggeration, it spends large amounts of time stalled). And I would go to a speed test web site of some kind but I can't since nothing will load. Briefly put, the laptop I am using was connected to two wireless networks while using Ubuntu 11.04 without any issues before this. It was also connected to a wired network without any issues. It dual boats Windows 7 which has never had any issues, not even with the current wireless network. Just to be clear, on the current wi-fi network, Windows 7 encounters no issues (speedtest.net puts the network speed at 1mb/s) but my network connection in Ubuntu 11.04 is so slow as to literally be unusable. I am unfamiliar with the router except for the fact that it boasts a Rogers logo (that's a large ISP/cable provider in Canada for those not familiar with the land of igloos and polar bears). I am far from the router and some desktop widget I use tells me the signal strength is at 58% (it seems fairly reliable and this would appear to match up with the filled bars in the network icon). I should also mention I'm just renting a room in this house so I'm not the network administrator and while I can access the 192.168.0.1 router page, the password wasn't set to 'password' so it's not much use to me. Here are a bunch of commands I ran which don't tell me a whole lot but I thought might be more instructive to the wise around here: lspci (just showing my network card): 05:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) This one is self explanatory. PING www.googele.com (216.65.41.185) 56(84) bytes of data. 64 bytes from nnw.net (216.65.41.185): icmp_req=1 ttl=51 time=267 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=2 ttl=51 time=190 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=3 ttl=51 time=212 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=4 ttl=51 time=207 ms 64 bytes from nnw.net (216.65.41.185): icmp_req=5 ttl=51 time=220 ms --- www.googele.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4003ms rtt min/avg/max/mdev = 190.079/219.699/267.963/26.121 ms ifconfig eth0 Link encap:Ethernet HWaddr 20:6a:8a:02:20:da UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:960 (960.0 B) TX bytes:960 (960.0 B) wlan0 Link encap:Ethernet HWaddr 20:7c:8f:05:c6:bf inet addr:192.168.0.16 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::227c:8fff:fe05:c6bf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:982 errors:0 dropped:0 overruns:0 frame:0 TX packets:658 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:497250 (497.2 KB) TX bytes:95076 (95.0 KB) Thank you

  Read the article

• Acer Aspire 3680 Wireless Signal Problem

  - by SHiNKiROU

  I am using Acer Aspire 3680. I recently reinstalled Windows Vista, and the wireless did not work by default. I installed the "Atheros Wireless LAN Driver" on this site: http://support.acer-euro.com/drivers/notebook/as_3680.html The result, the wireless APs are successfully scanned. However, when I tried to join a network, even with 5/5 signal, an error message showed up diagnosing signal too little. I restarted as Ubuntu, and wireless worked perfectly, with same computer position. Even more confusing, When I moved to the kitchen (2 meters close to the router), the wireless connected, when I move back to my room, wireless failed on Vista and worked on Ubuntu. It is clearly the driver problem. Acer laptops seems come with pre-installed drivers, but after re-installation, they are all gone. (I can't find the original Acer backup disc) Please do not answer "move closer to the AP" and something related to "interference", as wireless worked with Ubuntu's default driver.

  Read the article

• 'Object variable or With block variable not set' error when setting a range in VBA

  - by David Gard

  I have a function that creates a Pivot Table, but I am getting an error when I try to set a range that will be merged and have a title added to it. In the below code, pivot_title_range is a 'String' variable, and is optional when calling the funtion. title_range is a 'Range' variable. Both lines that set the range (whether or not the users declares pivot_title_range) cause the same error. If pivot_title_range = "" Then title_range = ActiveSheet.Range("B3:E4") Else title_range = ActiveSheet.Range(pivot_title_range) End If Here is the error that I am getting - Run-time error '91': Object variable or With block variable not set If required, here is a Pastebin of the full function - http://pastebin.com/L711jayc. The offending code starts on line 160. Is anybody able to tell me what I am doing wrong? Thanks.

  Read the article

• Is it possible to have the D-Link DIR-628 run in wireless bridge mode?

  - by Matt R

  Short of installing 3rd party software, does the D-Link DIR-628 run in bridged wireless? I'm trying to have the dlink hook up to an existing linksys wireless router to add more range/get stronger signal.

  Read the article

• Wireless not working - HP Probook 4540s

  - by Oguzhan

  I just installed Ubuntu 12.04 on 3 HP Probook 4540s's, and none of them seems to be able to connect to wireless networks. I have 1 Probook 4540s with Windows 7 installed and I can access wlan from it. I tried installing the necessary drivers from HP's website, but it still doesn't seem to be working. I've seen other people with different Probooks having similar problems, but their computers seem to be able to detect and even attempt to connect wlans, while mine doesn't even acknowledge that it has wireless. Any help would be appreciated. lspci: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] 03:00.0 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30) 03:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30) 03:00.3 System peripheral: JMicron Technology Corp. MS Host Controller (rev 30) 04:00.0 Network controller: Ralink corp. Device 3290 04:00.1 Bluetooth: Ralink corp. Device 3298 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07)

  Read the article

• Troubleshooting wireless network connectivity

  - by taserian

  I'm currently running Ubuntu 10.10, and I'm running into trouble keeping my wireless connection alive. After rebooting, I get about 5-10 minutes of a good speed connection; afterwards, the connection just zeroes out. I've gotten around to stirring up a shell script that gives me another 10 minutes or so of connectivity. Script contents below: #! /bin/bash sudo ifconfig wlan0 up echo "Enabling wireless device . . ." sleep 5 sudo iwconfig wlan0 essid MyNetworkName echo "Connecting to network. . ." sleep 10 sudo dhclient wlan0 echo "Getting IP address. . ." sleep 5 echo "Done. Closing window. . ." sleep 5 Shortly after running the line "sudo iwconfig wlan0 essid MyNetworkName" from the script, I notice the speed pick up. Other computers in my home running Windows XP are not affected by this problem, so all indications point to my Ubuntu machine. Does anyone have any pointers as to how to resolve this?

  Read the article

• Connected to wireless, but no internet access

  - by boogaloo

  After installing Ubuntu 12.04 a week ago wireless internet had been working fine. It stopped working yesterday, however, and I'm at a loss for what to do even after scouring replies to similar posted problems. I have tried using Google's public DNS and turning off proxy settings on Firefox. I have used nm-tool and lshw to make sure my wireless device and driver are connected. If anyone can help me resolve this issue I would be extremely grateful! @kregerjd $ ping -c3 www.google.com ping: unknown host www.google.com @Alaa: $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 $ ping -c4 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data From 192.168.1.104 icmp_seq=1 Destination Host Unavailable From 192.168.1.104 icmp_seq=2 Destination Host Unavailable --- 192.168.1.1 ping statistics --- 4 packets transmitted, 0 received, +2 errors, 100% packet loss, time 2998ms pipe 4

  Read the article

• 12.10 Wireless hotspot configuration and internet browsing - question

  - by Indian

  In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

  Read the article

• Wireless switch on Dell XT2 - strange behaviour of rfkill

  - by DyP

  I have an Dell Latitude XT2 using an Intel WLAN card (lspci lists it as "Intel Corporation Ultimate N WiFi Link 5300") running Lubuntu 12.04 with recent updates. The laptop has a hardware WLAN switch. I have problems activating the WLAN when booting with the hardware switch set to "off". The situation is a bit confusing, unfortunately. rfkill lists two WLAN devices (though lspci only shows the Intel one). This is the situation when booting with the hardware switch set to "Off": 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes From some tests, I conclude WLAN is only activated when both, the dell-wifi and phy0, are unblocked by soft- and hardware. But I can only unblock dell-wifi after the hardware switch is set to "on". Procedure right from boot with hardware switch set to "Off": Soft-unblocking phy0 works as expected. Could be done by start-up script. sudo rfkill unblock 0: nothing happens. Soft block of dell-wifi not removed. Set the hardware switch to "on": phy0 gets its hard block removed. Still no WLAN. sudo rfkill unblock 0: both the soft and hard lock of dell-wifi are removed. WLAN is now active and works. sudo rfkill block 0: only adds the soft block as expected. WLAN goes off again. So, in order to activate WLAN, I have to use the hardware switch and afterwards (manually) run a script - that's a bit inconvenient. Does someone know a better solution? Maybe a daemon could help that listens to rfkill events to unblock dell-wifi after I have set the hardware switch to "on"? (sounds like another workaround) When booting with the hardware switch set to "On", nothing is blocked neither hard nor soft.

  Read the article

• AR242x / AR542x wireless card not working

  - by Pipan87

  My wifi worked perfect until I updated to the latest version of Ubuntu. Now I don't find any wireless connections at all. I have tried lots of guides on the internet but I can't get it to work. I did however start to work once after writing something I don't remember in Terminal, but after rebooting it stopped working again. Some info (don't know if you need more to help): 01:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0) Subsystem: Acer Incorporated [ALI] Device 022c Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 55200000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=128] Capabilities: [40] Power Management version 2 Capabilities: [48] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [58] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [180] Device Serial Number ff-93-2e-de-00-23-8b-ff Kernel driver in use: ATL1E Kernel modules: atl1e 02:00.0 Ethernet controller: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Foxconn International, Inc. Device e00d Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at 54100000 (64-bit, non-prefetchable) [size=64K] Capabilities: [40] Power Management version 2 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [60] Express Legacy Endpoint, MSI 00 Capabilities: [90] MSI-X: Enable- Count=1 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Kernel driver in use: ath5k Kernel modules: ath5k

  Read the article

• Unable to enable wireless in ubuntu 12.04

  - by Joe

  I have a Vostro 2520 and not sure how to enable wireless on my machine. The details are given below, would appreciate any pointers to resolving this issue. lsmod returns Module Size Used by ath9k 132390 0 ath9k_common 14053 1 ath9k ath9k_hw 411151 2 ath9k,ath9k_common ath 24067 3 ath9k,ath9k_common,ath9k_hw b43 365785 0 mac80211 506816 2 ath9k,b43 cfg80211 205544 4 ath9k,ath,b43,mac80211 bcma 26696 1 b43 ssb 52752 1 b43 ndiswrapper 282628 0 ums_realtek 18248 0 usb_storage 49198 1 ums_realtek uas 18180 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_cirrus 24002 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep psmouse 97362 0 dell_wmi 12681 0 sparse_keymap 13890 1 dell_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq wmi 19256 1 dell_wmi snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_cirrus,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device mac_hid 13253 0 i915 473240 3 drm_kms_helper 46978 1 i915 uvcvideo 72627 0 drm 242038 4 i915,drm_kms_helper videodev 98259 1 uvcvideo soundcore 15091 1 snd dell_laptop 18119 0 dcdbas 14490 1 dell_laptop i2c_algo_bit 13423 1 i915 v4l2_compat_ioctl32 17128 1 videodev snd_page_alloc 18529 2 snd_hda_intel,snd_pcm video 19596 1 i915 serio_raw 13211 0 mei 41616 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 sudo lshw -class network *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:07:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7c00000-f7c07fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 07 serial: 78:45:c4:a3:aa:65 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168e-3_0.0.4 03/27/12 ip=192.168.1.5 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: yes

  Read the article

• Wireless does not work 12.10

  - by superkoop

  My primary issue is that my wireless does not work after I installed 12.10. The output to rfkill list all: 5: hci0: Bluetooth Soft blocked: no Hard blocked: no The output to lshw -class network is: *-network description: Ethernet interface product: 88E8040 PCI-E Fast Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:09:00.0 logical name: eth0 version: 12 serial: 00:21:9b:d6:46:51 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:fe8fc000-fe8fffff ioport:de00(size=256) *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0b:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:17 memory:fe7fc000-fe7fffff The output to lspci -nn for the pertinent information is: 0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01) Thus, it seems the solution would be to run: sudo apt-get install linux-headers-generic sudo apt-get install --reinstall bcmwl-kernel-source sudo modprobe wl However, I do not currently have access to an ethernet connection, as I am currently only able to use verizon wireless 3g internet. Thus, is there a way to set up ICS with a Vista machine so that I can access the internet by using the Vista machine as the host? Or, is it possible to fix this by downloading the important packages in vista and moving them to ubuntu via USB drive?

  Read the article

• Can't connect to Wireless

  - by SimplyRed37

  Good day all! I hope you are doing good. I have performed a WUBI installation of 12.04 on my HP G62 laptop, which has an Atheros AR9285 wireless chipset. Everything works fine with my wired network connection. However, wireless is unable to connect to my wifi network. I enter the WPA2 key and then it attemps to connect, but eventually comes back, asking for the WPA2 key again, as if it was not good. All of the other laptops in the household are able to connect, using the same key (I configured them all, so I am 500% sure of the WPA2 key). Any idea as to what could be causing this? I can definitely post the output of CLI commands like "rfkill list" or "sudo lshw -class network", or "ifconfig". I have installed Ubuntu a few time but I am definitely still a newbie, but I am definitely computer savyy. Looking forward to suggestions . Thanks in advance !!! Dan...

  Read the article

• WiFi can't reconnect after suspend/hibernate on Ubuntu 12.04.1

  - by CyberOPS

  I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. When I updated to Ubuntu 12.04 I encrypted the home folder, so I wasn't able to suspend or hibernate anymore (disappointing :l). Because of this and another issue I had1, I chose to reinstall. Sometime after I reinstalled, I was reminded about reconnection issue because it wasn't working after I suspended. I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Since I'm new to linux, I'm gonna have a tough time figuring this out by myself. So does anyone know how, or what I need to figure out how, to fix this? Info: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (Not using Wubi) Wireless Card Driver: Intel Wireless WiFi Link drivers for Linux (iwlwifi) 1 - ntfs-config caused colord to crash on startup, even after NTFS-Config was removed.

  Read the article

• 12.04 WiFi issue on a particular access point

  - by user71706

  I have a WiFi access point that I connect to a PC to share its Internet connection with multiple machines, in a training environment. All the machines with 11.04 connect to this access point with no problem, and can access any server on the Internet. These machines have an Intel Wireless -N 1030 BGN chipset (as reported by lspci). Now, my problem is that I don't manage to connect 12.04 machines to this wireless network. The systems I tried do manage to connect (confirmed by Network Manager), but when I try to access a website like http://kernel.org, the browser shows "Connecting to kernel.org...", but displays a "The connection has timed out" error page. Other symptoms: Name resolution works (for example 'nslookup kernel.org') finds kernel.org's IP address 'ping kernel.org' doesn't work The same 12.04 machines have no problem at all with other wireless networks. So there is probably something weird in my access point (though the 11.04 machines are not impacted). Would you have any suggestions for investigating this issue? Thanks, Michael.

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >