Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 11/361 | < Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >

• If I enable/disable my wireless device, my computer will panic

  - by Yinyanghu

  Now, I use Debian 6.0.6 instead of Fedora 16/17. But I still sustain the problem of my wireless problem. If I enable/disable my laptop wireless device or my usb wifi adaptor, my laptop will panic. It seems like all the processes stop at that time and I have to restart my laptop directly. P.S. I think I installed the drivers correctly and the linux kernel may have some bugs. For example, when I unplug my usb wifi adaptor or I use this command, ifdown wlan0 I encounter this problem. Wireless Device: PCI: 03:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) USB: Bus 002 Device 005: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

  Read the article

• Can't connect to wireless without typing sudo modprobe b43 in terminal

  - by user90889

  I just upgraded to 12.04 on an old ACER Travelmate 5320 using Broadcom 4311. I wasn't able to connect to the internet through the wireless for a few days. It didn't even display wireless networks. I was finally able to make it work by following the instructions found here: http://linuxwireless.org/en/users/Drivers/b43#supported However, each time I log on to the computer I have to go to the terminal and type sudo modprobe b43 to make the wireless work. Is there somehow I can avoid this? I have used Ubuntu for many years but always relied on other people to help me with the technical stuff. The terminal is alien to me so I literally follow online forum instructions without knowing what I'm doing. Also, I tried many many things before I managed to make it work. So I'm worried I may have installed something that now conflicts with whatever the sudo modprobe b43 does. Thank you

  Read the article

• No wireless after resuming from suspend?

  - by lapor

  When I resume my computer from suspend it doesn't want to connect to any wireless connection. It looks like it is connecting, but after a while it asks me to retype a password for wireless connection. It connect after I restart it. I am using Toshiba Satellite A210 and Ubuntu 10.10 (I have the same problem with 10.04 and 11.04 beta2. 14:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) Subsystem: Askey Computer Corp. Device 7128 Flags: bus master, fast devsel, latency 0, IRQ 19 Memory at cfcf0000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath5k Kernel modules: ath5k Should I file a bug?

  Read the article

• Ubuntu 12.04 on Vm Player showing Wired Network Instead of Wireless Network

  - by Fak365

  I am new to Ubuntu, recently I installed ubuntu 12.04 in Vm Player (Virtual Machine) on my Dell laptop having windows 7 ultimate 32 bit for just to check the security of my wireless network and want to crack the WiFi (WPA-PSK) password but in ubuntu it does not show the wireless network it shows the 2 arrow sign as i have not connect the ethernet cable to my laptop and connected through WiFi on my main OS (windows 7) but it shows the wired network and internet is working but it does not show wifi connection. On windows 7 WiFi is connected and showing the WiFi connection and working correctly.But my main motive is to crack the WiFi password as it can't detect WiFi network so what to do? Please Help.!!thanks My Laptop Specification : Laptop : Dell Latitude D620 OS : Windows 7 Ultimate 32 bit Processor : Core Duo 2 T7200 @ 2Ghz Ram : 2 GB WiFi card : Intel Pro/Wireless 3945 ABG Virtual Machine : Vm Player V 5.0.1 If Need to Install Drivers Please Give Me Full Information how to install and which driver I should install. Thanks In Advance.

  Read the article

• wireless not working, but wired does

  - by user211762

  First of all I'm new to Ubuntu, just bought a laptop with Ubuntu yesterday. I disable wireless networking in the upper right corner, and I don't have option to enable it back. I tried a lot of things and none is seems to work: I installed Wicd network manger, and it says no wireless network found, but i assure you there are several of them as my smart tv can detect them. when I type rfkill list, I get this: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no when I type ifconfig wlan0, I get this: wlan0: error fetching interface information: Device not found

  Read the article

• Manually re-enable wireless and bluetooth

  - by tacozmeister

  So, today, I decided to turn off bluetooth to save battery power. When I did so, it did everything like normal. Whatever. But whenever I want to re-enable Wifi and Bluetooth, it just has "Enable Wireless" and "Enable bluetooth" grayed out in the respective things on the top-right of the desktop. I am using 12.04 Precise Pangolin on a Dell laptop that has never had wireless problems before. Clicking the grayed-out part does nothing. Re-logging and restarting has no effect, and I'm on an account that has full administrative permission. My attempts: ~$ sudo dmesg | grep wlan0 [19.960211] ADDRCONF(NETDEV_UP): wlan0: link is not ready . ~$ sudo dmesg | grep blue [[nothing]] What do I do to manually re-enable wireless and bluetooth?

  Read the article

• Router to WIFI Client to Router (New solution for distance when repeater doesnt help)

  - by Kangarooo

  Ethernet to TL-WR340G with WIFI enabled Using TL-WA500 tried repeater mode which was not good enough and had password problems (could not connect if using either ASCII or Normal password in one way then in repeater worked other way) and also could not forward (repeat) WPA/WPA2 security. So since this repeater can also be as client, I made it as client and used another router (TL-WR740N) to get from wire connection from that client and all was working for a little bit. Every machine is set up to be auto DHCP. 1st when setting up client mode I found it working after doing reset. Then after some tens of minutes internet stopped working. When I removed WiFi client then all went back to normal. Where is the problem and how to make this work? Ethernet- TL-WR340G(AutoDHCP) ==> wifi ==> TL-WA500 TL-WA500 wifi client mode(AutoDHCP) ==> wire ==> TL-WR740N TL-WR740N router mode (AutoDHCP) ==> My Computer In other words: TL-WR340G ) ) ) ) TL-WA500 ===== TL-WR740N ==== PC1 ) ) WiFi === Wire

  Read the article

• Frequent and weird wifi disconnections

  - by Sidou

  How would you explain, troubleshoot (and solve) the following problem? Wifi ADSL modem router D-link 2640R installed in living room at about 1.8m height. Working fine, synchronising and getting/serving stable internet connection. First situation: -Laptop 01 in other end of the house, let's say in room01 southern to the living room, distant by about 15m. Getting stable signal of good to very good quality. No disconnection. -Laptop 02 in room02 opposite to room01 (5m West) which makes it almost at the same distance and direction from the router located 15m North. Getting stable signal of good to very good quality. No disconnection. Second situation: -Laptop 01 moved to room03 Northern to the living room (actually just 3m behind the wall where the router lies). Getting stable signal of excellent quality. No disconnection. -Laptop 02 still in room02 but now experiences frequent disconnections (actually almost impossible to get the Internet even though the signal level is still very good. Either no Internet with the wifi icon appearing connected to access point or no connection established at all which happens every 2 minutes and that means virtually no Internet at all as I can just get a timeframe of 1 minute or so to load any website or even get to the router's web based control panel. If Laptop 01 is completely shut down or its wifi adapters shut down or even still working but its wifi MAC address forbidden, then Laptop 02 has no problem at all. If Laptop 02 is moved to a nearer location to the router, in the living room for instance, then no connection problem occurs even if Laptop 01 is also connected. And also if we move back Laptop 01 to its original location (room 01), then no problem as well. I'm completely lost and don't know how to address this issue. I tried to change the Wifi channel and even tried the auto channel scan but that didn't solve it. I know that the problem is probably coming from Laptop 01 being in its new location or some sort of interference as the problem occurs only under the described condition but I have no idea how to solve it! I also scanned the neighborhood for wifi jam using InSSIDer, there are few other access points but they don't seem to affect the situation. Any ideas about the steps to follow or tools to use ?

  Read the article

• How to connect to internet 2 or more pcs with an usb wifi adapter

  - by bhaoahd

  In one pc I have an USB Wifi adapter (Realtek RTL8187L Chipset), from there a 10 meters cable to an outdoor antenna. With that I connect to a public Access Point. Now I want to be able to connect more computers to internet using that same connection that comes from the outdoor antenna, what options do I have to do this? I do have another usb wifi adapter with a small omni antenna, and a router encore ENHWI-G/A. This router can be used as a Wifi AP, but it needs a modem that works with the RJ45 connector. Is there a way I could take internet from the outdoor antenna, and create another AP indoor using that router to "repeat" that wifi that comes from the outdoor antenna? If creating this second AP is not possible, should I use some sort of local network between computers, connect my main PC with the outdoor antenna, and share the connection through the lan? (I would really prefer to have a second AP indoor so I can connect other devices like a Palm, but I am not sure how could this be possible with this router and the usb wifi adapter)

  Read the article

• Is it better to use a crowded 2.4GHz Wi-Fi channel 1, 6, 11 or "unused" 3, 4, 8, or 9?

  - by Luke

  I understand that 2.4GHz Wi-Fi channels overlap, and that the only non-overlapping channels in the US are 1, 6, and 11. Generally, my signal strength on channels 1, 6, and 11 are much stronger than my neighbors' on the same channel. However, several of the channels may have 4 or 5 others on that same channel. In this scenario, is it better to use 3, 4, 8, or 9? Or is it better to use the crowded channels 1, 6, and 11? As a secondary question, does it even matter that my signal strength is much higher than theirs? Related: Why use wifi channels other than 1, 6 or 11?

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• How do I get wireless to work on a Dell Mini 1018 with Realtek RTL 8188CE Network Adapter?

  - by Laurence Nagel

  My Dell Mini 1018 used to work fine with Ubuntu 12.04 with no problems connecting with the wireless card. Then I made the big mistake of attempting to disable WiFi by right-clicking on the wireless applet and un-checking "Enable Wireless." Since then, I cannot get wireless working again. The wireless applet reports that "wireless is disabled by hardware switch" but there is no hardware switch on this computer. Issuing a rfkill list yields the following: 0: dell-wifi: Wireless LAN Soft blocked: yes Hard block: yes 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I'm in way over my head, and my computer is now useless. Help!!!

  Read the article

• Wireless cycling between connected and disconnected

  - by Tony Kilgore

  My friend has a Acer Aspire 5733Z-4851 it keeps disconnecting and connecting to his wifi but his hard wire will run just fine. Any suggestions? All the codes: lspci: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) lsmod: Module Size Used by snd_seq_dummy 12798 0 rfcomm 46619 0 bnep 18140 2 bluetooth 209199 10 rfcomm,bnep parport_pc 32688 0 ppdev 17073 0 lp 17759 0 parport 46345 3 parport_pc,ppdev,lp binfmt_misc 17500 1 ums_realtek 17949 0 snd_hda_codec_realtek 77876 1 uas 17844 0 coretemp 13400 0 snd_hda_intel 33491 4 snd_hda_codec 134212 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 96580 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30512 1 snd_seq_midi uvcvideo 76749 0 videobuf2_core 32851 1 uvcvideo videodev 120309 2 uvcvideo,videobuf2_core videobuf2_vmalloc 12860 1 uvcvideo videobuf2_memops 13368 1 videobuf2_vmalloc snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61521 3 snd_seq_dummy,snd_seq_midi,snd_seq_midi_event snd_timer 29425 2 snd_pcm,snd_seq arc4 12529 2 snd_seq_device 14497 4 snd_seq_dummy,snd_seq_midi,snd_rawmidi,snd_seq psmouse 95552 0 ath9k 131308 0 tg3 148780 0 snd 78734 17 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device microcode 22803 0 mac80211 539908 1 ath9k ath9k_common 14055 1 ath9k ath9k_hw 395218 2 ath9k,ath9k_common ath 23827 3 ath9k,ath9k_common,ath9k_hw i915 520629 3 soundcore 15047 1 snd serio_raw 13215 0 cfg80211 206566 3 ath9k,mac80211,ath snd_page_alloc 18484 2 snd_hda_intel,snd_pcm intel_ips 18049 0 lpc_ich 17061 0 drm_kms_helper 46784 1 i915 drm 275528 4 i915,drm_kms_helper mei 40690 0 i2c_algo_bit 13413 1 i915 joydev 17457 0 acer_wmi 32453 0 sparse_keymap 13890 1 acer_wmi mxm_wmi 12979 0 mac_hid 13205 0 wmi 19070 2 acer_wmi,mxm_wmi video 19335 2 i915,acer_wmi usb_storage 48838 1 ums_realtek sudo lshw -C network: *-network description: Ethernet interface product: NetLink BCM57780 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 01 serial: b8:70:f4:9a:35:b6 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.123 duplex=half firmware=sb latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:44 memory:d3400000-d340ffff[/QUOTE][QUOTE]*-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 68:a3:c4:eb:60:7d width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-19-generic firmware=N/A ip=192.168.0.168 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d2400000-d240ffff)

  Read the article

• How can a Cisco Aironet wireless card connect to a WPA encrypted network?

  - by Aibara Iduas

  I have a Thinkpad T40 running Ubuntu 10.10. I want to connect to wireless networks with WPA encryption; they appear in the network list, but are grayed out. The card does support WPA, since it works in Windows. In 10.10 the wireless works just fine with unprotected and WEP networks, but cannot connect to any WPA networks. The card is a Cisco Aironet Wireless 802.11b. I've been reading a lot of forum posts trying to find a solution, but either encounter threads where no solution was found or answers longer apply (most date from 2007, since this isn't the newest of computers). Here is the output of sudo lshw -c network: *-network:1 DISABLED description: Wireless Interface product: Cisco Aironet Wireless 802.11b vendor: AIRONET Wireless Communications physical id: 2 bus info: pci@000:02:02.0 logical name: eth1 version: 00 serial: 00:02:8a:78:6a:44 width: 32 bits clock: 33MHz capabilities: pm vpd bus_master cap_list rom ethernet physical wireless logical configuration: broadcast=yes driver=airo latency=64 maxlatency=4 mingnt=4 multicast=yes wireless=IEEE 802.11-DS Thanks, any help would be greatly appreciated!

  Read the article

• SSIS - Range lookups

  - by Repieter

    When developing an ETL solution in SSIS we sometimes need to do range lookups in SSIS. Several solutions for this can be found on the internet, but now we have built another solution which I would like to share, since it's pretty easy to implement and the performance is fast.   You can download the sample package to see how it works. Make sure you have the AdventureWorks2008R2 and AdventureWorksDW2008R2 databases installed. (Apologies for the layout of this blog, I don't do this too often :))   To give a little bit more information about the example, this is basically what is does: we load a facttable and do an SCD type 2 lookup operation of the Product dimension. This is done with a script component.   First we query the Data warehouse to create the lookup dataset. The query that is used for that is:   SELECT     [ProductKey]     ,[ProductAlternateKey]     ,[StartDate]     ,ISNULL([EndDate], '9999-01-01') AS EndDate FROM [DimProduct]     The output of this query is stored in a DataTable:     string lookupQuery = @"                         SELECT                             [ProductKey]                             ,[ProductAlternateKey]                             ,[StartDate]                             ,ISNULL([EndDate], '9999-01-01') AS EndDate                         FROM [DimProduct]";           OleDbCommand oleDbCommand = new OleDbCommand(lookupQuery, _oleDbConnection);         OleDbDataAdapter adapter = new OleDbDataAdapter(oleDbCommand);           _dataTable = new DataTable();         adapter.Fill(_dataTable);     Now that the dimension data is stored in the DataTable we use the following method to do the actual lookup:   public int RangeLookup(string businessKey, DateTime lookupDate)     {         // set default return value (Unknown)         int result = -1;           DataRow[] filteredRows;         filteredRows = _dataTable.Select(string.Format("ProductAlternateKey = '{0}'", businessKey));           for (int i = 0; i < filteredRows.Length; i++)         {             // check if the lookupdate is found between the startdate and enddate of any of the records             if (lookupDate >= (DateTime)filteredRows[i][2] && lookupDate < (DateTime)filteredRows[i][3])             {                 result = (filteredRows[i][0] == null) ? -1 : (int)filteredRows[i][0];                 break;             }         }           filteredRows = null;           return result;     }       This method is executed for every row that passes the script component. This is implemented in the ProcessInputRow method   public override void Input0_ProcessInputRow(Input0Buffer Row)     {         // Perform the lookup operation on the current row and put the value in the Surrogate Key Attribute         Row.ProductKey = RangeLookup(Row.ProductNumber, Row.OrderDate);     }   Now what actually happens?!   1. Every record passes the business key and the orderdate to the RangeLookup method. 2. The DataTable is then filtered on the business key of the current record. The output is stored in a DataRow [] object. 3. We loop over the DataRow[] object to see where the orderdate meets the following expression: (lookupDate >= (DateTime)filteredRows[i][2] && lookupDate < (DateTime)filteredRows[i][3]) 4. When the expression returns true (so where the data is between the Startdate and the EndDate), the surrogate key of the dimension record is returned   We have done some testing with this solution and it works great for us. Hope others can use this example to do their range lookups.

  Read the article

• How can I add a wireless router to a wired router?

  - by Tester101

  The Setup: wired D-link (EBR-2310) router connected to my cable modem. Wireless NetGear N300 (WNR2000v3) router connected to a LAN port on the wired router. What I'm trying to do: I'm trying to setup the wireless router to be a separate network, that only accesses the internet through the wired router. What I've done so far. I setup the wireless router's WAN port to get an address from ISP (which should be coming from my wired router running DHCP), and the LAN as a subnet (192.168.1). Wired router's LAN is 192.168.0. The problem: I'm not able to connect to the internet from the wireless router. At one point my wired router showed that it was handing out an IP to the wireless router, but that is not happening anymore. The question: Is what I'm trying to do possible? Am I not thinking about this properly? Do I need to buy a better wired router, with 2 WAN ports? How can I configure these routers to work together?

  Read the article

• Macro keeps crashing need to speed it up or rewrite it, excel vba 50,000 lines of data

  - by Joel

  Trying to speed up a macro that runs over 50,000 lines ! I have two ways of performing the same vba macro Sub deleteCommonValue() Dim aRow, bRow As Long Dim colB_MoreFirst, colB_LessFirst, colB_Second, colC_MoreFirst, colC_LessFirst, colC_Second As Integer Dim colD_First, colD_Second As Integer Application.ScreenUpdating = False Application.DisplayStatusBar = False Application.Calculation = xlCalculationManual Application.EnableEvents = False aRow = 2 bRow = 3 colB_MoreFirst = Range("B" & aRow).Value + 0.05 colB_LessFirst = Range("B" & aRow).Value - 0.05 colB_Second = Range("B" & bRow).Value colC_MoreFirst = Range("C" & aRow).Value + 0.05 colC_LessFirst = Range("C" & aRow).Value - 0.05 colC_Second = Range("C" & bRow).Value colD_First = Range("D" & aRow).Value colD_Second = Range("D" & bRow).Value Do If colB_Second <= colB_MoreFirst And colB_Second >= colB_LessFirst Then If colC_Second <= colC_MoreFirst And colC_Second >= colC_LessFirst Then If colD_Second = colD_First Or colD_Second > colD_First Then Range(bRow & ":" & bRow).Delete 'bRow delete, assign new value to bRow colB_Second = Range("B" & bRow).Value colC_Second = Range("C" & bRow).Value colD_Second = Range("D" & bRow).Value '----------------------------------------------------- Else Range(aRow & ":" & aRow).Delete bRow = aRow + 1 'aRow value deleted, assign new value to aRow and bRow colB_MoreFirst = Range("B" & aRow).Value + 0.05 colB_LessFirst = Range("B" & aRow).Value - 0.05 colB_Second = Range("B" & bRow).Value colC_MoreFirst = Range("C" & aRow).Value + 0.05 colC_LessFirst = Range("C" & aRow).Value - 0.05 colC_Second = Range("C" & bRow).Value colD_First = Range("D" & aRow).Value colD_Second = Range("D" & bRow).Value '----------------------------------------------------- End If Else bRow = bRow + 1 'Assign new value to bRow colB_Second = Range("B" & bRow).Value colC_Second = Range("C" & bRow).Value colD_Second = Range("D" & bRow).Value '----------------------------------------------------- End If Else bRow = bRow + 1 'Assign new value to bRow colB_Second = Range("B" & bRow).Value colC_Second = Range("C" & bRow).Value colD_Second = Range("D" & bRow).Value '----------------------------------------------------- End If If IsEmpty(Range("D" & bRow).Value) = True Then aRow = aRow + 1 bRow = aRow + 1 'finish compare aRow, assign new value to aRow and bRow colB_MoreFirst = Range("B" & aRow).Value + 0.05 colB_LessFirst = Range("B" & aRow).Value - 0.05 colB_Second = Range("B" & bRow).Value colC_MoreFirst = Range("C" & aRow).Value + 0.05 colC_LessFirst = Range("C" & aRow).Value - 0.05 colC_Second = Range("C" & bRow).Value colD_First = Range("D" & aRow).Value colD_Second = Range("D" & bRow).Value '----------------------------------------------------- End If Loop Until IsEmpty(Range("D" & aRow).Value) = True Application.ScreenUpdating = False Application.DisplayStatusBar = False Application.Calculation = xlCalculationAutomatic Application.EnableEvents = False End Sub or Sub deleteCommonValue() Dim aRow, bRow As Long Application.ScreenUpdating = False aRow = 2 bRow = 3 Do If Range("B" & bRow).Value <= (Range("B" & aRow).Value + 0.05) _ And Range("B" & bRow).Value >= (Range("B" & aRow).Value - 0.05) Then If Range("C" & bRow).Value <= (Range("C" & aRow).Value + 0.05) _ And Range("C" & bRow).Value >= (Range("C" & aRow).Value - 0.05) Then If Range("D" & bRow).Value = (Range("D" & aRow).Value) _ Or Range("D" & bRow).Value > (Range("D" & aRow).Value) Then Range(bRow & ":" & bRow).Delete Else Range(aRow & ":" & aRow).Delete bRow = aRow + 1 Range("A" & aRow).Select End If Else bRow = bRow + 1 Range("A" & bRow).Select End If Else bRow = bRow + 1 Range("A" & bRow).Select End If If IsEmpty(Range("D" & bRow).Value) = True Then aRow = aRow + 1 bRow = aRow + 1 End If Loop Until IsEmpty(Range("D" & aRow).Value) = True End Sub I dont know if my best option will be to split the rows into multiple sheets?

  Read the article

• Wireless on Inspiron 1501 not working on Ubuntu 12.04 LTS

  - by Jeek C

  As titled, I have Ubuntu 12.04 LTS on an Inspiron 1501, and the wireless has refused to work thus far. Below is what I have tried: Activating the Broadcom driver via System Settings Additional Driver Using the below commands sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer installing the cutter software Sadly, none of them can get the wireless working. Is there anything else I can try?

  Read the article

• Can't get Wireless RT2x00usb driver to work, and can't blacklist it

  - by TheLQ

  After a two year hiatus to Linux, I try it again out again. And then I run into to driver issues... I have an old Linksys WUSB54G v4 Wireless USB Adapter. In previous versions I had to use a combination of Ndiswrapper and Wicd to hope of getting it working. In 10.10, apparently there are built in drivers for it. Unfortunately they don't work. Fails to connect to my WPA network, fails to connect to my open unencrypted network. Wicd fails at "Obtaining IP address" or when using static IPs fails at verifying connectivity to network. Getting fed up I tried the ndiswrapper approach. Installed and configured, but still not working, even when blacklisting the rt2570 module. So for some debugging I added some lines to my /etc/modprobe.d/blacklist.conf file blacklist rt2570 blacklist prism54usb blacklist rt2x00lib blacklist rt2x00usb Restart and find this: lordquackstar@quackbeast:/etc/modprobe.d$ lsmod | grep rt2 rt2500usb 18049 0 rt2x00usb 9779 1 rt2500usb rt2x00lib 27275 2 rt2500usb,rt2x00usb led_class 2633 1 rt2x00lib mac80211 231541 2 rt2x00usb,rt2x00lib cfg80211 144470 2 rt2x00lib,mac80211 Seems to be ignored... Tried this: lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00usb ERROR: Removing 'rt2x00usb': Resource temporarily unavailable lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00lib ERROR: Removing 'rt2x00lib': Resource temporarily unavailable and couldn't connect. Restarted and was back to the same modules loading. Maybe there's something in the log: lordquackstar@quackbeast:/etc/modprobe.d$ tail -n100000 /var/log/syslog | grep rt2 Dec 13 19:01:15 quackbeast kernel: [ 23.698056] Registered led device: rt2500usb-phy0::radio Dec 13 19:01:15 quackbeast kernel: [ 23.698140] Registered led device: rt2500usb-phy0::quality Dec 13 19:01:15 quackbeast kernel: [ 23.701680] usbcore: registered new interface driver rt2500usb Dec 13 19:01:15 quackbeast NetworkManager[855]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Dec 13 19:17:47 quackbeast kernel: [ 23.521759] Registered led device: rt2500usb-phy0::radio Dec 13 19:17:47 quackbeast kernel: [ 23.521824] Registered led device: rt2500usb-phy0::quality Dec 13 19:17:47 quackbeast kernel: [ 23.524740] usbcore: registered new interface driver rt2500usb Dec 13 19:17:47 quackbeast NetworkManager[798]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Seems to be autoloading. So this means that even if I pull it out, remove the module, and get it working, it still won't work when its plugged in all the time. More info: lordquackstar@quackbeast:/etc/modprobe.d$ sudo lshw -C Network *SNIP* *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:12:17:9b:f3:1e capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=2.6.35-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg USB: lordquackstar@quackbeast:/etc/modprobe.d$ lsusb | grep -i rt Bus 001 Device 003: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB] Any suggestions on how to either fix the rt2x00usb driver or permanently block it from loading? Note that I already have ndiswrapper installed

  Read the article

• Wireless Broadcom 4313 not working on Ubuntu 12.04

  - by user88568

  It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

  Read the article

• Use Mobile Broadband USB as Wireless Adapter USB - HUAWEI E173

  - by Alex

  I have an Mobile Broadband USB (HUAWEI E173), which can also work as a WiFi Adapter USB. The problem is that Ubuntu 12.04 only recognizes it as an Mobile Broadband USB, not as an Wireless Adapter USB, is there a way to "trick" Ubuntu to recognize my USB as a Wireless Adapter? Thanks in advance. Notes: I used the lsusb command and got this: `Bus 002 Device 009: ID 12d1:1c23 Huawei Technologies Co., Ltd.` I have 64-bit Ubuntu Installed, so it may just be a driver problem.

  Read the article

• How can I prioritize wireless networks with network-manager

  - by kynan

  Mostly I use my laptop in an environment where different wireless networks are available and I would like to preferably connect to one of those and only fall back to the other one if that one is not available. Is there any way of prioritizing which wireless networks network-manager preferably connects to? The only workaround I found so far was unchecking Connect Automatically in the options and re-enabling it when my preferred network is not available.

  Read the article

• iwconfig, iw not displaying wireless information

  - by Srivatsa Kanchi

  after fresh install to 12.10, the wireless information is not shown by both iwconfig and iw. The wireless sets up successfully and able to connect This is what i get $ iwconfig wlan0 wlan0 IEEE 802.11abgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=14 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off $ iw wlan0 link Not connected. $ uname -a Linux srivatsa-ThinkPad-T61 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Wireless card unseen by lspci

  - by al-Amjad Tawfiq Isstaif

  I installed both Ubuntu 8.04 and 10.04. I tried to install the wireless card. although I succeeded in installing the driver using ndiswrapper, it tells me that the hardware is not present. When I use lspci, it doesn't list it. I have this laptop model and I think it should have the same entry about the wireless card here: http://ubuntuforums.org/showthread.php?t=1810193 Could the problem be other than hardware malfunction?

  Read the article

• can not always shutdown when wireless connection on

  - by user67362

  When the wireless connection on, I can not always shutdown my computer, always it stoped at the ubuntu interface. But if I use "sudo ifconfig wlan0 down" before shutdown, it will not happen, is there something wrong with the wireless dirver? 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01) 09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

  Read the article

< Previous Page | 7 8 9 10 11 12 13 14 15 16 17 18  | Next Page >