Search Results

Search found 1694 results on 68 pages for 'ws tx'.

Page 14/68 | < Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >

• KVM network bridge and public static IP for both host and guests

  - by Javier Martinez

  I have a Debian Server with 4 public static addresses. There is a KVM guest (also Debian) installed and running. What I want is to give the guest an IP of the host, so that both machines have public IPs. IP 1: 188.165.A.B IP 2: 178.33.CCC.D IP 3: 178.33.CCC.E IP 4: 178.33.CCC.F What should I do to have connection for host and guest ? This is network conf: # ifconfig br0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:188.165.A.B Bcast:188.165.255.255 Mask:255.255.255.0 inet6 addr: fe80::ea40:f2ff:fe0a:cc28/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3618 errors:0 dropped:4 overruns:0 frame:0 TX packets:4853 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:599562 (585.5 KiB) TX bytes:1693443 (1.6 MiB) eth0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet6 addr: fe80::ea40:f2ff:fe0a:cc28/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4274 errors:0 dropped:0 overruns:0 frame:0 TX packets:4879 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:720045 (703.1 KiB) TX bytes:1715641 (1.6 MiB) Interrupt:20 Memory:fe500000-fe520000 eth0:0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.D Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 eth0:1 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.E Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 eth0:2 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.F Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27932 errors:0 dropped:0 overruns:0 frame:0 TX packets:27932 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1820862 (1.7 MiB) TX bytes:1820862 (1.7 MiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:87:40:ec inet6 addr: fe80::fc54:ff:fe87:40ec/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:1452 (1.4 KiB) TX bytes:16958 (16.5 KiB) #route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default aa.bb.cc.eu 0.0.0.0 UG 0 0 0 br0 188.165.255.0 * 255.255.255.0 U 0 0 0 br0 # brctl show bridge name bridge id STP enabled interfaces br0 8000.e840f20acc28 no eth0 vnet0 There is no firewall enabled and DNS is configured properly. What I want to achieve: | | | +----+-------------------------+-+------+ | | Host | | | | | | | | | | +------------+------+ | | eth0 | eth0:0-1 | | | 188.165.A.B | | | | | | | | | br0 vnet0 | | | +------------+------+ | | | | | | | | +------------+------+ | | | | | | | | eth0:2-+ | | | | 178.33.CCC.F | | | | | | | | Guest | | | +-------------------+ | +---------------------------------------+ Thanks you

  Read the article

• KVM network bridge and public static IP for both host and guests

  - by Javier Martinez

  I have a Debian Server with 4 public static addresses. There is a KVM guest (also Debian) installed and running. What I want is to give the guest an IP of the host, so that both machines have public IPs. IP 1: 188.165.A.B IP 2: 178.33.CCC.D IP 3: 178.33.CCC.E IP 4: 178.33.CCC.F What should I do to have connection for host and guest ? This is network conf: # ifconfig br0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:188.165.A.B Bcast:188.165.255.255 Mask:255.255.255.0 inet6 addr: fe80::ea40:f2ff:fe0a:cc28/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3618 errors:0 dropped:4 overruns:0 frame:0 TX packets:4853 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:599562 (585.5 KiB) TX bytes:1693443 (1.6 MiB) eth0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet6 addr: fe80::ea40:f2ff:fe0a:cc28/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4274 errors:0 dropped:0 overruns:0 frame:0 TX packets:4879 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:720045 (703.1 KiB) TX bytes:1715641 (1.6 MiB) Interrupt:20 Memory:fe500000-fe520000 eth0:0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.D Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 eth0:1 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.E Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 eth0:2 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.F Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27932 errors:0 dropped:0 overruns:0 frame:0 TX packets:27932 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1820862 (1.7 MiB) TX bytes:1820862 (1.7 MiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:87:40:ec inet6 addr: fe80::fc54:ff:fe87:40ec/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:1452 (1.4 KiB) TX bytes:16958 (16.5 KiB) #route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default aa.bb.cc.eu 0.0.0.0 UG 0 0 0 br0 188.165.255.0 * 255.255.255.0 U 0 0 0 br0 # brctl show bridge name bridge id STP enabled interfaces br0 8000.e840f20acc28 no eth0 vnet0 There is no firewall enabled and DNS is configured properly. What I want to achieve: | | | +----+-------------------------+-+------+ | | Host | | | | | | | | | | +------------+------+ | | eth0 | eth0:0-1 | | | 188.165.A.B | | | | | | | | | br0 vnet0 | | | +------------+------+ | | | | | | | | +------------+------+ | | | | | | | | eth0:2-+ | | | | 178.33.CCC.F | | | | | | | | Guest | | | +-------------------+ | +---------------------------------------+ Thanks you

  Read the article

• Network Bridging for WiFi-to-Ethernet in linux

  - by shakaran

  It is possible Network Bridging for WiFi-to-Ethernet in linux instead of Ethernet-to-Ethernet? I have a CentOS 6.3 machine. I am using KVM and I want perform a brigde for virtualize more machines. This machine is connected only via wireless connection and it doesn't have a ethernet connection. So, I did a bridge over the WiFi interface like: # cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE="br0" NM_CONTROLLED="yes" ONBOOT=yes TYPE=Bridge BOOTPROTO=none IPADDR=192.168.1.50 PREFIX=24 GATEWAY=192.168.1.1 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System br0" Then I edit my wireless conection like: # cat /etc/sysconfig/network-scripts/ifcfg-mywireless ESSID="mywireless" MODE=Managed KEY_MGMT=WPA-PSK WPA_ALLOW_WPA2=yes CIPHER_PAIRWISE=CCMP CIPHER_GROUP=CCMP TYPE=Wireless #BOOTPROTO=none #IPADDR=192.168.1.50 #PREFIX=24 #GATEWAY=192.168.1.1 #DNS1=8.8.8.8 #DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="Auto mywireless" UUID=874***** ONBOOT=yes LAST_CONNECT=1355923469 BRIDGE=br0 After, I restart the network: # /etc/init.d/network restart Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface Auto_mywireless: Error: Unknown connection: 874***** [FAILED] Bringing up interface br0: [ OK ] But as you can see, it show a error. My ifconfig output shows now: # ifconfig br0 Link encap:Ethernet HWaddr 6E:20:AD:CE:D8:AB inet addr:192.168.1.50 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::6c20:adff:fece:d8ab/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:67 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:6393 (6.2 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:432 errors:0 dropped:0 overruns:0 frame:0 TX packets:432 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:62433 (60.9 KiB) TX bytes:62433 (60.9 KiB) ra0 Link encap:Ethernet HWaddr 00:22:F7:2B:87:E5 inet addr:192.168.1.42 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:f7ff:fe2b:87e5/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:46 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:487894880 (465.2 MiB) TX bytes:148136473 (141.2 MiB) virbr0 Link encap:Ethernet HWaddr 52:54:00:5B:30:9A inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:70 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:5838 (5.7 KiB) But this doesn't give internet connection and I loss access to 192.168.1.50. So, it is possible setup this networking bridge WiFi-to-Ethernet?

  Read the article

• Command-line connect to wired network for Ubuntu

  - by Tim

  I like to know how to use command-line to connect to a wired network in general for Ubuntu 8.10? In my case, I connect a cable to my laptop but it doesn't work with my WICD. So I like to try command-line method. Here is the ifconfig of my network adapters: $ ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:9f:8d:23:74 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0x1800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4457 errors:0 dropped:0 overruns:0 frame:0 TX packets:4457 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:493002 (493.0 KB) TX bytes:493002 (493.0 KB) wlan0 Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 RX packets:1508929 errors:0 dropped:0 overruns:0 frame:0 TX packets:768144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:806027375 (806.0 MB) TX bytes:78834873 (78.8 MB) wlan0:avahi Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 inet addr:169.254.5.92 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 wmaster0 Link encap:UNSPEC HWaddr 00-0E-9B-AB-56-19-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Thanks and regards! UPDATE: Tried what oyvindio suggested. Here is the failing message: $ sudo dhclient3 eth0 There is already a pid file /var/run/dhclient.pid with pid 18279 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:c0:9f:8d:23:74 Sending on LPF/eth0/00:c0:9f:8d:23:74 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping.

  Read the article

• OpenVPN bridged not pinging beyond openvpn server on Ubuntu/Windows 2003

  - by ani

  I set up an OpenVPN server using Ubuntu and a windows server 2003 client to interconnect two networks between two different offices. They can now ping each other, but the rest of the network cannot be contacted by the windows client. Office 1 has internal network of: 192.168.0.0 255.255.240.0 Office 2 has internal network of: 192.168.16.0 255.255.255.0 And the configuration files are: Server.conf port 1194 --script-security 2 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" # TCP or UDP server? ;proto tcp proto udp dev tap0 ;dev tun ca ca.crt cert openvpn.crt key openvpn.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.0.59 255.255.240.0 192.168.6.72 192.168.6.75 push "route 192.168.0.0 255.255.240.0" push "dhcp-option DNS 192.168.0.2" push "dhcp-option DOMAIN testeers.local" keepalive 10 120 tls-auth ta.key 0 # This file is secret comp-lzo user nobody group nogroup persist-key persist-tun log /var/log/openvpn/openvpn.log status /var/log/openvpn-status.log verb 3 Client Config file client dev tap ;dev tun --script-security 2 ;proto tcp proto udp remote 1xx.2xx.xxx.124 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert admin-VAIO.crt key admin-VAIO.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 Ifconfig on the server now shows the following: br0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 inet addr:192.168.0.59 Bcast:192.168.15.255 Mask:255.255.240.0 inet6 addr: fe80::250:56ff:fe8b:1a49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1081860 errors:0 dropped:1358 overruns:0 frame:0 TX packets:242385 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76600615 (76.6 MB) TX bytes:64474575 (64.4 MB) eth0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:1144125 errors:0 dropped:7172 overruns:0 frame:0 TX packets:252486 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:109893729 (109.8 MB) TX bytes:66372620 (66.3 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:67865 errors:0 dropped:0 overruns:0 frame:0 TX packets:67865 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5183276 (5.1 MB) TX bytes:5183276 (5.1 MB) tap0 Link encap:Ethernet HWaddr 32:4f:42:11:b7:c5 inet6 addr: fe80::304f:42ff:fe11:b7c5/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3329 errors:0 dropped:0 overruns:0 frame:0 TX packets:215472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:373205 (373.2 KB) TX bytes:17465832 (17.4 MB)

  Read the article

• arp "who-has tell" on cloned machine

  - by mcmorry

  I have a urgent problem to solve today, but I'm lost. Please help. I've cloned a Virtual Machine hosted on VM Ware ESXi 4.1 The OS is now Ubuntu Server 12.04 LTS, but at the time of cloning it was 10.04 LTS. I fixed the MAC address manually inside /etc/udev/rules.d/70-persistent-net.rules. It is a known problem on Ubuntu. I had to remove the old MAC address and set the new one as eth0. Everything seems to work fine, except ARP. My provider OVH sent me a warning to resolve it today (this is the second day) or they will block my IP! The log contains many lines like this: Tue Jun 5 01:04:29 2012 : arp who-has 178.32.136.212 tell 178.32.136.224 where .224 is the cloned server that is causing problems, and .212 is the cloned one. arp -na returns: ? (178.33.230.254) at 00:07:b4:00:00:02 [ether] on eth0 ? (178.32.136.212) at 00:50:56:09:8e:f1 [ether] on eth0 The first IP is the ESXi machine. The second one should not be there. I'm not an expert and I don't know what else to do to fix this problem. Any help will be very appreciated. Thanks. EDIT: ifcofig on .224: eth0 Link encap:Ethernet HWaddr 00:50:56:01:32:c6 inet addr:178.32.136.224 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe01:32c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:399924 errors:0 dropped:465 overruns:0 frame:0 TX packets:241884 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:58006071 (58.0 MB) TX bytes:663603166 (663.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:516216 errors:0 dropped:0 overruns:0 frame:0 TX packets:516216 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:236284275 (236.2 MB) TX bytes:236284275 (236.2 MB) ifconfig on .212: eth0 Link encap:Ethernet HWaddr 00:50:56:09:8e:f1 inet addr:178.32.136.212 Bcast:178.32.136.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fe09:8ef1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:16014 errors:0 dropped:0 overruns:0 frame:0 TX packets:14511 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:15134444 (15.1 MB) TX bytes:2683025 (2.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:9944 errors:0 dropped:0 overruns:0 frame:0 TX packets:9944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1139347 (1.1 MB) TX bytes:1139347 (1.1 MB)

  Read the article

• Where is my VMware-ws FreeNAS CIFS(ZFS) bottle-neck?

  - by maka

  Background: I'm building a quiet HTPC + NAS that is also supposed to be used for general computer usage. I'm so far generally happy with things, it was just that I was expecting a little better IO performance. I have no clue if my expectations are unreal. The NAS is there as a general purpose file storage and as a media server for XBMC and other devices. ZFS is a requirement. Question: Where is my bottle-neck, and is there anything I can do config wise, to improve my performance? I'm thinking VM-disk settings could be something but I really have no idea where to go since I'm neither experienced with FreeNAS nor VMware-WS. Tests: When I'm on the host OS and copy files (from the SSD) to the CIFS share, I get around 30 Mbytes/sec read and write. When I'm on my laptop laptop, wired to the network, I get about the same specs. The test I've done are with a 16 GB ISO, and with about 200 MB of RARs and I've tried avoiding the RAM-cache by reading different files than the ones I'm writing ( 10 GB). It feels like having less CPU cores is a lot more efficient, since the resource manager in Windows reports less CPU-usage. With 4 cores in VMware, CPU usage was 50-80%, with 1 core it was 25-60%. EDIT: HD ActiveTime was quite high on SSD so I moved the page file, disabled hibernate and enabled Win DiskCache both on SSD and RAID. This resulted in no real performance difference for one file, but if i transferred 2 files the total speed went up to 50 Mbytes/s vs ~40. The ActiveTime avg also went down a lot (to ~20%) but has now higher bursts. DiskIO is on ~ 30-35 Mbytes/s avgs, with ~100Mb bursts. Network is on 200-250Mbits/s with ~45 active TCP connections. Hardware Asus F2A85-M Pro A10-5700 16GB DDR3 1600 OCZ Vertex 2 128GB SSD 2x Generic 1tb 7200 RPM drives as RAID0 (in win7) Intel Gigabit Desktop CT Software Host OS: Win7 (SSD) VMware Worksation 9 (SSD) FreeNAS 8.3 VM (20GB VDisk on SSD) CPU: I've tried 1, 2 and 4 cores. Virtualisation engine, Preferred mode: Automatic 10,24Gb ram 50Gb SCSI VDisk on the RAID0, VDisk is formatted as ZFS and exposed through CIFS through FreeNAS. NIC Bridge, Replicate physical network state Below are two typical process print-outs while I'm transfering one file to the CIFS share. last pid: 2707; load averages: 0.60, 0.43, 0.24 up 0+00:07:05 00:34:26 32 processes: 2 running, 30 sleeping Mem: 101M Active, 53M Inact, 1620M Wired, 2188K Cache, 149M Buf, 8117M Free Swap: 4096M Total, 4096M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 2640 root 1 102 0 50164K 10364K RUN 0:25 25.98% smbd 1897 root 6 44 0 168M 74808K uwait 0:02 0.00% python last pid: 2746; load averages: 0.93, 0.60, 0.33 up 0+00:08:53 00:36:14 33 processes: 2 running, 31 sleeping Mem: 101M Active, 53M Inact, 4722M Wired, 2188K Cache, 152M Buf, 5015M Free Swap: 4096M Total, 4096M Free PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND 2640 root 1 76 0 50164K 10364K RUN 0:52 16.99% smbd 1897 root 6 44 0 168M 74816K uwait 0:02 0.00% python I'm sorry if my question isn't phrased right, I'm really bad at these kind of things, and it is the first time I post here at SU. I also appreciate any other suggestions to something, I could have missed.

  Read the article

• Hibernate save() and transaction rollback

  - by Marco

  Hi, In Hibernate when i save() an object in a transaction, and then i rollback it, the saved object still remains in the DB. It's strange because this issue doesn't happen with the update() or delete() method, just with save(). Here is the code i'm using: DbEntity dbEntity = getDbEntity(); HibernateUtil.beginTransaction(); Session session = HibernateUtil.getCurrentSession(); session.save(dbEntity); HibernateUtil.rollbackTransaction(); And here is the HibernateUtil class (just the involved functions, i guarantee the getSessionFactory() method works well - there is an Interceptor handler, but it doesn't matter now): private static final ThreadLocal<Session> threadSession = new ThreadLocal<Session>(); private static final ThreadLocal<Transaction> threadTransaction = new ThreadLocal<Transaction>(); /** * Retrieves the current Session local to the thread. * <p/> * If no Session is open, opens a new Session for the running thread. * * @return Session */ public static Session getCurrentSession() throws HibernateException { Session s = (Session) threadSession.get(); try { if (s == null) { log.debug("Opening new Session for this thread."); if (getInterceptor() != null) { log.debug("Using interceptor: " + getInterceptor().getClass()); s = getSessionFactory().openSession(getInterceptor()); } else { s = getSessionFactory().openSession(); } threadSession.set(s); } } catch (HibernateException ex) { throw new HibernateException(ex); } return s; } /** * Start a new database transaction. */ public static void beginTransaction() throws HibernateException { Transaction tx = (Transaction) threadTransaction.get(); try { if (tx == null) { log.debug("Starting new database transaction in this thread."); tx = getCurrentSession().beginTransaction(); threadTransaction.set(tx); } } catch (HibernateException ex) { throw new HibernateException(ex); } } /** * Rollback the database transaction. */ public static void rollbackTransaction() throws HibernateException { Transaction tx = (Transaction) threadTransaction.get(); try { threadTransaction.set(null); if ( tx != null && !tx.wasCommitted() && !tx.wasRolledBack() ) { log.debug("Tyring to rollback database transaction of this thread."); tx.rollback(); } } catch (HibernateException ex) { throw new HibernateException(ex); } finally { closeSession(); } } Thanks

  Read the article

• During npm install socket.io I get error 127, node-waf command not found. How to solve it?

  - by SandyWeb

  I'm trying to install socket.io on centos 5 with node.js package manager. During installation I got an error: "make: node-waf: Command not found" and "This is most likely a problem with the ws package" # npm install socket.io npm http GET https://registry.npmjs.org/socket.io npm http 304 https://registry.npmjs.org/socket.io npm http GET https://registry.npmjs.org/policyfile/0.0.4 npm http GET https://registry.npmjs.org/redis/0.6.7 npm http GET https://registry.npmjs.org/socket.io-client/0.9.2 npm http 304 https://registry.npmjs.org/policyfile/0.0.4 npm http 304 https://registry.npmjs.org/socket.io-client/0.9.2 npm http 304 https://registry.npmjs.org/redis/0.6.7 npm http GET https://registry.npmjs.org/uglify-js/1.2.5 npm http GET https://registry.npmjs.org/ws npm http GET https://registry.npmjs.org/xmlhttprequest/1.2.2 npm http GET https://registry.npmjs.org/active-x-obfuscator/0.0.1 npm http 304 https://registry.npmjs.org/xmlhttprequest/1.2.2 npm http 304 https://registry.npmjs.org/uglify-js/1.2.5 npm http 304 https://registry.npmjs.org/ws npm http 304 https://registry.npmjs.org/active-x-obfuscator/0.0.1 npm http GET https://registry.npmjs.org/zeparser/0.0.5 > [email protected] preinstall /root/node_modules/socket.io/node_modules/socket.io-client/node_modules/ws > make **node-waf configure build make: node-waf: Command not found make: *** [all] Error 127** npm ERR! [email protected] preinstall: `make` npm ERR! `sh "-c" "make"` failed with 2 npm ERR! npm ERR! Failed at the [email protected] preinstall script. npm ERR! This is most likely a problem with the ws package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! make npm ERR! You can get their info via: npm ERR! npm owner ls ws npm ERR! There is likely additional logging output above. npm ERR! npm ERR! System Linux 2.6.18-194.17.4.el5 npm ERR! command "node" "/usr/bin/npm" "install" "socket.io" npm ERR! cwd /root npm ERR! node -v v0.6.13 npm ERR! npm -v 1.1.10 npm ERR! code ELIFECYCLE npm ERR! message [email protected] preinstall: `make` npm ERR! message `sh "-c" "make"` failed with 2 npm ERR! errno {} npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /root/npm-debug.log npm not ok What is "node-waf" and how can I solve this problem? Thanks!

  Read the article

• javaEE javax.xml.bind.MarshalException

  - by sandeep

  Hi, I am getting javax.xml.bind.MarshalException error. I am sending List from my webservice to the backingbean and I have this error. Here is my code: Errors WARNING: invocation error on ejb endpoint Login_webservice at /Login_webserviceService/Login_webservice : javax.xml.bind.MarshalException - with linked exception: [javax.xml.bind.JAXBException: class JPA.Cantable nor any of its super class is known to this context.] javax.xml.ws.WebServiceException: javax.xml.bind.MarshalException - with linked exception: [javax.xml.bind.JAXBException: class JPA.Cantable nor any of its super class is known to this context.] at com.sun.xml.ws.message.jaxb.JAXBMessage.writePayloadTo(JAXBMessage.java:325) at com.sun.xml.ws.message.AbstractMessageImpl.writeTo(AbstractMessageImpl.java:142) at com.sun.xml.ws.encoding.StreamSOAPCodec.encode(StreamSOAPCodec.java:109) at com.sun.xml.ws.encoding.SOAPBindingCodec.encode(SOAPBindingCodec.java:278) at com.sun.xml.ws.transport.http.HttpAdapter.encodePacket(HttpAdapter.java:380) at com.sun.xml.ws.transport.http.HttpAdapter.access$100(HttpAdapter.java:92) at com.sun.xml.ws.transport.http.HttpAdapter$HttpToolkit.handle(HttpAdapter.java:525) at com.sun.xml.ws.transport.http.HttpAdapter.handle(HttpAdapter.java:285) at com.sun.xml.ws.transport.http.servlet.ServletAdapter.handle(ServletAdapter.java:143) at org.glassfish.webservices.Ejb3MessageDispatcher.handlePost(Ejb3MessageDispatcher.java:116) at org.glassfish.webservices.Ejb3MessageDispatcher.invoke(Ejb3MessageDispatcher.java:87) at org.glassfish.webservices.EjbWebServiceServlet.dispatchToEjbEndpoint(EjbWebServiceServlet.java:196) at org.glassfish.webservices.EjbWebServiceServlet.service(EjbWebServiceServlet.java:127) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) Backing bean @WebServiceRef(wsdlLocation = "http://localhost:26565/Login_webserviceService/Login_webservice?WSDL") public String login() { System.out.println("Login Phase entered"); int result = 0; List list; List finalList = null; try { Weblogin.LoginWebserviceService service = new Weblogin.LoginWebserviceService(); Weblogin.LoginWebservice port = service.getLoginWebservicePort(); result = port.login(voterID, password); Weblogin.LoginWebservice port1 = service.getLoginWebservicePort(); list = port1.candDetails(1); finalList = list; this.setList(finalList); } catch (Exception e) { e.printStackTrace(); } if (result == 1) return "polling"; else return "login"; } Webservice public List candDetails(int pollEvent) { List resultList = null; List finalList = null; try { if (pollEvent == 1) { resultList = em.createNamedQuery("Cantable.findAll").getResultList(); finalList = resultList; } } catch (Exception e) { e.printStackTrace(); } return resultList; }

  Read the article

• Type Mismatch using VBScript to create Pivot Table/Chart

  - by Rodricks

  I get Run time error:Type mismatch for the following code: Dim Field Field="Gen8" '''' ============================================================================== EXCEL Sheet '==============Errors -Stacked Chart by Year and Week --ALL WEEKS ''''=================================================== objExcel.ActiveWorkbook.Worksheets.Add SheetNumber = SheetNumber ' add adds in front so sheetnumber stays 1 objExcel.Sheets(SheetNumber).Select objExcel.Sheets(SheetNumber).Activate objExcel.Sheets(SheetNumber).Name = "YRWk" SheetName = "SYS_Product_YRWeeks" '============== strSQLCustomers = "select isnull(AB.Week,D.Week_Num) AS YRWk,ISNULL(AB.UnCorrectable,0) as UE," & _ "isnull(AB.Correctable,0) as CE, isnull(AB.SYS_Product,'" & Field & "'" & _ ") as SYS_Product from AHS_Dates D Left Join (select * from P_tot where " & _ "SYS_Product = '" & Field & "'" & _ " ) AB on AB.Year_=D.Year_ and AB.Week=D.Week_Num order by YRWk" FetchData2.Open strSQLCustomers, openConnection, adOpenStatic, adLockReadOnly If FetchData2.RecordCount > 0 Then **objExcel.ActiveWorkbook.Connections.Add SheetName, "", _ Array(Array( _ "ODBC;DRIVER=SQL Server Native Client 10.0;SERVER=" & sServerIP & ";TimeOut=5000000; Trusted_Connection=Yes;Integrated Security=SSPI;" _ ), Array("DATABASE=" & sDataBaseName & ";")), Array(strSQLCustomers), 2** objExcel.ActiveWorkbook.PivotCaches.Create(SourceType:=xlExternal, SourceData:= _ objExcel.ActiveWorkbook.Connections(SheetName), Version:= _ xlPivotTableVersion14).CreatePivotTable TableDestination:=objExcel.Sheets(SheetNumber).Name & "!R3C7", _ TableName:="PivotTable" & SheetNumber, DefaultVersion:=xlPivotTableVersion14 Set ws = objExcel.ActiveWorkbook.Worksheets(objExcel.Sheets(SheetNumber).Name) objExcel.Cells(3, 7).Select ws.Shapes.AddChart.Select objExcel.ActiveWorkbook.ActiveChart.ChartType = xlAreaStacked objExcel.ActiveWorkbook.ActiveChart.SetSourceData Source:=ws.Range(objExcel.Sheets(SheetNumber).Name & "!$G$3:$I$20") With ws.PivotTables("PivotTable1").PivotFields("SYS_PRoduct") .Orientation = xlColumnField .Position = 1 End With With ws.PivotTables("PivotTable1").PivotFields("YRWk") .Orientation = xlRowField .Position = 1 End With ' With ws.PivotTables("PivotTable1").PivotFields("Year_") ' .Orientation = xlRowField ' .Position = 2 ' End With objExcel.ActiveWorkbook.ActiveChart.ChartTitle.Text = " Errors by Week and Year -ALLWEEKS" ws.PivotTables("PivotTable1").AddDataField ws.PivotTables( _ "PivotTable1").PivotFields("UE"), "Sum of UnCorrectable", xlSum ws.PivotTables("PivotTable1").AddDataField ws.PivotTables( _ "PivotTable1").PivotFields("CE"), "Sum of Correctable", xlSum End If ''MsgBox (FetchData2.RecordCount) FetchData2.Close I have used the same pivot chart + table in other slides. The problem I think is the query length My question: 1.Is there a better way for me to access the query results. Would appreciate the steps if any. 2.If I can make it a procedure how do I modify the pivot chart/table creation. Thanks. The query results with all 52 weeks: Week UE CE SYS_Product(or Field) 1 0 0 Gen8 2 0 0 Gen8 3 0 0 Gen8 4 0 0 Gen8 5 0 0 Gen8 6 0 0 Gen8

  Read the article

• Not able to use spring Beans outside container . Always picking up WebSphere Context

  - by Abhijit

  We have the a whole lot of spring bean defined in our project which we deploy in Websphere ^. One example being the following: oracle.jdbc.driver.OracleDriver jdbc:oracle:thin:@oracle:1521:OASIS oasis_owner o3ngin33r Now we have a service locator class like following private static ServiceLocator serviceLocator = new ServiceLocator(); private static ApplicationContext beanFactory = new ClassPathXmlApplicationContext(APPLICATION_CONTEXT_LOCATION); protected ServiceLocator() { } public ApplicationContext getBeanFactory() { return beanFactory; } public static ServiceLocator getInstance() { return serviceLocator; Now when I am trying to do this from my jUnit ServiceLocator.getInstance().getBean("oasJdbcData"; getting the following exception Caused by: javax.naming.ServiceUnavailableException: Could not obtain an initial context due to a communication failure. Since no provider URL was specified, the default provider URL of "corbaloc:iiop:[email protected]:2809/NameService" was used. Make sure that any bootstrap address information in the URL is correct and that the target name server is running. Possible causes other than an incorrect bootstrap address or unavailable name server include the network environment and workstation network configuration. [Root exception is org.omg.CORBA.TRANSIENT: java.net.ConnectException: Connection refused: connect:host=192.168.255.1,port=2809 vmcid: IBM minor code: E02 completed: No] at com.ibm.ws.naming.util.WsnInitCtxFactory.mapInitialReferenceFailure(WsnInitCtxFactory.java:1968) at com.ibm.ws.naming.util.WsnInitCtxFactory.mergeWsnNSProperties(WsnInitCtxFactory.java:1172) at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootContextFromServer(WsnInitCtxFactory.java:720) at com.ibm.ws.naming.util.WsnInitCtxFactory.getRootJndiContext(WsnInitCtxFactory.java:643) at com.ibm.ws.naming.util.WsnInitCtxFactory.getInitialContextInternal(WsnInitCtxFactory.java:489) at com.ibm.ws.naming.util.WsnInitCtx.getContext(WsnInitCtx.java:113) at com.ibm.ws.naming.util.WsnInitCtx.getContextIfNull(WsnInitCtx.java:428) at com.ibm.ws.naming.util.WsnInitCtx.lookup(WsnInitCtx.java:144) at javax.naming.InitialContext.lookup(InitialContext.java:361) at org.springframework.jndi.JndiTemplate$1.doInContext(JndiTemplate.java:155) at org.springframework.jndi.JndiTemplate.execute(JndiTemplate.java:88) at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:153) at org.springframework.jndi.JndiTemplate.lookup(JndiTemplate.java:178) at org.springframework.jndi.JndiLocatorSupport.lookup(JndiLocatorSupport.java:104) at org.springframework.jndi.JndiObjectLocator.lookup(JndiObjectLocator.java:105) at org.springframework.jndi.JndiObjectFactoryBean.lookupWithFallback(JndiObjectFactoryBean.java:200) at org.springframework.jndi.JndiObjectFactoryBean.afterPropertiesSet(JndiObjectFactoryBean.java:186) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.invokeInitMethods(AbstractAutowireCapableBeanFactory.java:1368) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1334) ... 33 more which clearly shows it is looking for IntialContext of Websphere which I dont want Any body can tell me what I am doing wrong?

  Read the article

• Refactor This (Ugly Code)!

  - by Alois Kraus

  Ayende has put on his blog some ugly code to refactor. First and foremost it is nearly impossible to reason about other peoples code without knowing the driving forces behind the current code. It is certainly possible to make it much cleaner when potential sources of errors cannot happen in the first place due to good design. I can see what the intention of the code is but I do not know about every brittle detail if I am allowed to reorder things here and there to simplify things. So I decided to make it much simpler by identifying the different responsibilities of the methods and encapsulate it in different classes. The code we need to refactor seems to deal with a handler after a message has been sent to a message queue. The handler does complete the current transaction if there is any and does handle any errors happening there. If during the the completion of the transaction errors occur the transaction is at least disposed. We can enter the handler already in a faulty state where we try to deliver the complete event in any case and signal a failure event and try to resend the message again to the queue if it was not inside a transaction. All is decorated with many try/catch blocks, duplicated code and some state variables to route the program flow. It is hard to understand and difficult to reason about. In other words: This code is a mess and could be written by me if I was under pressure. Here comes to code we want to refactor:         private void HandleMessageCompletion(                                      Message message,                                      TransactionScope tx,                                      OpenedQueue messageQueue,                                      Exception exception,                                      Action<CurrentMessageInformation, Exception> messageCompleted,                                      Action<CurrentMessageInformation> beforeTransactionCommit)         {             var txDisposed = false;             if (exception == null)             {                 try                 {                     if (tx != null)                     {                         if (beforeTransactionCommit != null)                             beforeTransactionCommit(currentMessageInformation);                         tx.Complete();                         tx.Dispose();                         txDisposed = true;                     }                     try                     {                         if (messageCompleted != null)                             messageCompleted(currentMessageInformation, exception);                     }                     catch (Exception e)                     {                         Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e);                     }                     return;                 }                 catch (Exception e)                 {                     Trace.TraceWarning("Failed to complete transaction, moving to error mode"+ e);                     exception = e;                 }             }             try             {                 if (txDisposed == false && tx != null)                 {                     Trace.TraceWarning("Disposing transaction in error mode");                     tx.Dispose();                 }             }             catch (Exception e)             {                 Trace.TraceWarning("Failed to dispose of transaction in error mode."+ e);             }             if (message == null)                 return;                 try             {                 if (messageCompleted != null)                     messageCompleted(currentMessageInformation, exception);             }             catch (Exception e)             {                 Trace.TraceError("An error occured when raising the MessageCompleted event, the error will NOT affect the message processing"+ e);             }               try             {                 var copy = MessageProcessingFailure;                 if (copy != null)                     copy(currentMessageInformation, exception);             }             catch (Exception moduleException)             {                 Trace.TraceError("Module failed to process message failure: " + exception.Message+                                              moduleException);             }               if (messageQueue.IsTransactional == false)// put the item back in the queue             {                 messageQueue.Send(message);             }         }     You can see quite some processing and handling going on there. Yes this looks like real world code one did put together to make things work and he does not trust his callbacks. I guess these are event handlers which are optional and the delegates were extracted from an event to call them back later when necessary.  Lets see what the author of this code did intend:          private void HandleMessageCompletion(             TransactionHandler transactionHandler,             MessageCompletionHandler handler,             CurrentMessageInformation messageInfo,             ErrorCollector errors             )         {               // commit current pending transaction             transactionHandler.CallHandlerAndCommit(messageInfo, errors);               // We have an error for a null message do not send completion event             if (messageInfo.CurrentMessage == null)                 return;               // Send completion event in any case regardless of errors             handler.OnMessageCompleted(messageInfo, errors);               // put message back if queue is not transactional             transactionHandler.ResendMessageOnError(messageInfo.CurrentMessage, errors);         }   I did not bother to write the intention here again since the code should be pretty self explaining by now. I have used comments to explain the still nontrivial procedure step by step revealing the real intention about all this complex program flow. The original complexity of the problem domain does not go away but by applying the techniques of SRP (Single Responsibility Principle) and some functional style but we can abstract the necessary complexity away in useful abstractions which make it much easier to reason about it. Since most of the method seems to deal with errors I thought it was a good idea to encapsulate the error state of our current message in an ErrorCollector object which stores all exceptions in a list along with a description what the error all was about in the exception itself. We can log it later or not depending on the log level or whatever. It is really just a simple list that encapsulates the current error state.          class ErrorCollector          {              List<Exception> _Errors = new List<Exception>();                public void Add(Exception ex, string description)              {                  ex.Data["Description"] = description;                  _Errors.Add(ex);              }                public Exception Last              {                  get                  {                      return _Errors.LastOrDefault();                  }              }                public bool HasError              {                  get                  {                      return _Errors.Count > 0;                  }              }          }   Since the error state is global we have two choices to store a reference in the other helper objects (TransactionHandler and MessageCompletionHandler)or pass it to the method calls when necessary. I did chose the latter one because a second argument does not hurt and makes it easier to reason about the overall state while the helper objects remain stateless and immutable which makes the helper objects much easier to understand and as a bonus thread safe as well. This does not mean that the stored member variables are stateless or thread safe as well but at least our helper classes are it. Most of the complexity is located the transaction handling I consider as a separate responsibility that I delegate to the TransactionHandler which does nothing if there is no transaction or Call the Before Commit Handler Commit Transaction Dispose Transaction if commit did throw In fact it has a second responsibility to resend the message if the transaction did fail. I did see a good fit there since it deals with transaction failures.          class TransactionHandler          {              TransactionScope _Tx;              Action<CurrentMessageInformation> _BeforeCommit;              OpenedQueue _MessageQueue;                public TransactionHandler(TransactionScope tx, Action<CurrentMessageInformation> beforeCommit, OpenedQueue messageQueue)              {                  _Tx = tx;                  _BeforeCommit = beforeCommit;                  _MessageQueue = messageQueue;              }                public void CallHandlerAndCommit(CurrentMessageInformation currentMessageInfo, ErrorCollector errors)              {                  if (_Tx != null && !errors.HasError)                  {                      try                      {                          if (_BeforeCommit != null)                          {                              _BeforeCommit(currentMessageInfo);                          }                            _Tx.Complete();                          _Tx.Dispose();                      }                      catch (Exception ex)                      {                          errors.Add(ex, "Failed to complete transaction, moving to error mode");                          Trace.TraceWarning("Disposing transaction in error mode");                          try                          {                              _Tx.Dispose();                          }                          catch (Exception ex2)                          {                              errors.Add(ex2, "Failed to dispose of transaction in error mode.");                          }                      }                  }              }                public void ResendMessageOnError(Message message, ErrorCollector errors)              {                  if (errors.HasError && !_MessageQueue.IsTransactional)                  {                      _MessageQueue.Send(message);                  }              }          } If we need to change the handling in the future we have a much easier time to reason about our application flow than before. After we did complete our transaction and called our callback we can call the completion handler which is the main purpose of the HandleMessageCompletion method after all. The responsiblity o the MessageCompletionHandler is to call the completion callback and the failure callback when some error has occurred.            class MessageCompletionHandler          {              Action<CurrentMessageInformation, Exception> _MessageCompletedHandler;              Action<CurrentMessageInformation, Exception> _MessageProcessingFailure;                public MessageCompletionHandler(Action<CurrentMessageInformation, Exception> messageCompletedHandler,                                              Action<CurrentMessageInformation, Exception> messageProcessingFailure)              {                  _MessageCompletedHandler = messageCompletedHandler;                  _MessageProcessingFailure = messageProcessingFailure;              }                  public void OnMessageCompleted(CurrentMessageInformation currentMessageInfo, ErrorCollector errors)              {                  try                  {                      if (_MessageCompletedHandler != null)                      {                          _MessageCompletedHandler(currentMessageInfo, errors.Last);                      }                  }                  catch (Exception ex)                  {                      errors.Add(ex, "An error occured when raising the MessageCompleted event, the error will NOT affect the message processing");                  }                    if (errors.HasError)                  {                      SignalFailedMessage(currentMessageInfo, errors);                  }              }                void SignalFailedMessage(CurrentMessageInformation currentMessageInfo, ErrorCollector errors)              {                  try                  {                      if (_MessageProcessingFailure != null)                          _MessageProcessingFailure(currentMessageInfo, errors.Last);                  }                  catch (Exception moduleException)                  {                      errors.Add(moduleException, "Module failed to process message failure");                  }              }            }   If for some reason I did screw up the logic and we need to call the completion handler from our Transaction handler we can simple add to the CallHandlerAndCommit method a third argument to the MessageCompletionHandler and we are fine again. If the logic becomes even more complex and we need to ensure that the completed event is triggered only once we have now one place the completion handler to capture the state. During this refactoring I simple put things together that belong together and came up with useful abstractions. If you look at the original argument list of the HandleMessageCompletion method I have put many things together:   Original Arguments New Arguments Encapsulate Message message CurrentMessageInformation messageInfo         Message message TransactionScope tx Action<CurrentMessageInformation> beforeTransactionCommit OpenedQueue messageQueue TransactionHandler transactionHandler        TransactionScope tx        OpenedQueue messageQueue        Action<CurrentMessageInformation> beforeTransactionCommit Exception exception,             ErrorCollector errors Action<CurrentMessageInformation, Exception> messageCompleted MessageCompletionHandler handler          Action<CurrentMessageInformation, Exception> messageCompleted          Action<CurrentMessageInformation, Exception> messageProcessingFailure The reason is simple: Put the things that have relationships together and you will find nearly automatically useful abstractions. I hope this makes sense to you. If you see a way to make it even more simple you can show Ayende your improved version as well.

  Read the article

• Network traffic is not being forwarded from a VM to the network using a bridged interface with Xen + libvirt

  - by foob

  I'm having trouble getting network access from a VM that I'm running using Xen and libvirt. I've been trying different things and reading similar posts online for a couple of days but I'm really stuck at this point. If anybody could offer some insight it would be much appreciated. I have a VM that I'm running on a host with a bridge set up as br0 and an interface eth0 on a 192.168.60.0/24 subnet. The networking portion of the libvirt configuration xml is: <interface type='bridge'> <mac address='ff:a0:d1:e5:07:de'/> <source bridge='br0'/> <script path='/etc/xen/scripts/vif-bridge'/> <model type='virtio' /> </interface> When I start the VM a vif6.0 interface is created on the host and the ifconfig output is: br0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet addr:192.168.60.33 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3570 (3.4 KiB) TX bytes:3508 (3.4 KiB) eth0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:492 (492.0 b) Interrupt:19 Memory:fe8f0000-fe900000 vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:6660 (6.5 KiB) TX bytes:468 (468.0 b) virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) The 'brctl show' output seems to show the bridge being configured correctly: br0 8000.00a0d1e507de no eth0 vif6.0 The ifcfg-eth0 contents in the VM are: DEVICE=eth0 BOOTPROTO=static HWADDR=FF:A0:D1:E5:07:DE IPADDR=192.168.60.133 NETMASK=255.255.255.0 ONBOOT=yes and the output of ifconfig in the VM look like what I would expect: eth0 Link encap:Ethernet HWaddr FF:A0:D1:E5:07:DE inet addr:192.168.60.133 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::fda0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:468 (468.0 b) TX bytes:7780 (7.5 KiB) but when I try to ssh or ping another computer I get 'no route to host.' Using tcpdump on the host system I tried to see if I could narrow down where the problem is: # tcpdump -vv -i vif6.0 tcpdump: WARNING: vif6.0: no IPv4 address assigned tcpdump: listening on vif6.0, link-type EN10MB (Ethernet), capture size 96 bytes 14:49:40.833997 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:41.833314 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:42.833309 arp who-has 192.168.60.35 tell 192.168.60.133 So the VM is sending out out an arp who-has packet when I try to ssh to 192.168.60.35. I think that this means the setup within the VM is ok and that this is an issue on the host system. If I run tcpdump with the interface of br0 then I don't see these arp packets. My thought here is that the packets are being blocked before going on to the bridge somehow. I tried adding an iptables rule to resolve this: -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT but it didn't work. I also tried the following: /sbin/sysctl -w net.bridge.bridge-nf-call-ip6tables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-arptables=0 /sbin/sysctl -w net.ipv4.ip_forward=1 which had no impact. Is it obvious to somebody who has more experience than me what I'm missing here? Should vif6.0 have the same MAC address is eth0 in the vm? Do I need more rules in my iptables? Thanks for any help!

  Read the article

• Built-in network card not working?

  - by Zeeshan

  Hi, I am new to Ubuntu. I have installed Ubuntu 9.04(Jaunty). After installation I found that network card is not wokring. And id doest not list in "System Preferenes Network Connections" So , i got another card from my friend and try to search on internat about my problem but still cant find solution. Some commands output is here which may be help to solve problem root@mzeeshan-desktop:/home/mzeeshan# uname -r 2.6.28-11-generic root@mzeeshan-desktop:/home/mzeeshan# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:02:44:4a:45:12 inet addr:192.168.5.37 Bcast:192.168.5.255 Mask:255.255.255.0 inet6 addr: fe80::202:44ff:fe4a:4512/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3774 errors:0 dropped:0 overruns:0 frame:0 TX packets:3611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4307045 (4.3 MB) TX bytes:583067 (583.0 KB) Interrupt:22 Base address:0x1000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) pan0 Link encap:Ethernet HWaddr 5e:25:17:a1:18:ac BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@mzeeshan-desktop:/home/mzeeshan# lspci 00:00.0 Host bridge: Intel Corporation Device 0069 (rev 12) 00:01.0 PCI bridge: Intel Corporation Auburndale/Havendale PCI Express x16 Root Port (rev 12) 00:19.0 Ethernet controller: Intel Corporation Device 10f0 (rev 05) 00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) 00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) 00:1c.6 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 7 (rev 05) 00:1c.7 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 8 (rev 05) 00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Ibex Peak SMBus Controller (rev 05) 00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 06:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07) 06:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 07) 06:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 06:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) root@mzeeshan-desktop:/home/mzeeshan# Motherboard is Intel DP55WG. I don't know what to do next. Any help will be greatly appreciated.. Thanks

  Read the article

• Networking- Wireless and Wired not working

  - by JJ White

  So everything in Ubuntu has been working great until networking stopped working. I've spent the better part of two days scouring for a fix with no luck. Here is my info...your help would so be appreciated. grep -i eth /var/log/syslog | tail Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): cleaning up... Sep 25 16:31:59 jj-laptop NetworkManager[970]: <info> (eth0): taking down device. Sep 25 16:31:59 jj-laptop kernel: [23403.998837] sky2 0000:02:00.0: eth0: disabling interface Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): now managed Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): bringing up device. Sep 25 16:35:54 jj-laptop kernel: [23413.629424] sky2 0000:02:00.0: eth0: enabling interface Sep 25 16:35:54 jj-laptop kernel: [23413.635703] ADDRCONF(NETDEV_UP): eth0: link is not ready Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): preparing device. Sep 25 16:35:54 jj-laptop NetworkManager[970]: <info> (eth0): deactivating device (reason 'managed') [2] and then ifconfig -a eth0 Link encap:Ethernet HWaddr 00:17:42:14:e9:e1 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:4605 errors:0 dropped:0 overruns:0 frame:0 TX packets:287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:315161 (315.1 KB) TX bytes:63680 (63.6 KB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:13018 errors:0 dropped:0 overruns:0 frame:0 TX packets:13018 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:880484 (880.4 KB) TX bytes:880484 (880.4 KB) wlan0 Link encap:Ethernet HWaddr 00:13:02:d0:ee:13 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) also iwconfig lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. and of course sudo lshw -C network *-network description: Ethernet interface product: 88E8055 PCI-E Gigabit Ethernet Controller vendor: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 12 serial: 00:17:42:14:e9:e1 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A latency=0 link=no multicast=yes port=twisted pair speed=1Gbit/s resources: irq:44 memory:f0000000-f0003fff ioport:2000(size=256) memory:c0a00000-c0a1ffff *-network DISABLED description: Wireless interface product: PRO/Wireless 3945ABG [Golan] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 02 serial: 00:13:02:d0:ee:13 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwl3945 driverversion=3.2.0-31-generic firmware=15.32.2.9 latency=0 link=no multicast=yes wireless=IEEE 802.11abg resources: irq:45 memory:c0100000-c0100fff last but not least lsmod Module Size Used by nls_iso8859_1 12617 0 nls_cp437 12751 0 vfat 17308 0 fat 55605 1 vfat usb_storage 39646 0 uas 17828 0 dm_crypt 22528 0 rfcomm 38139 0 parport_pc 32114 0 bnep 17830 2 ppdev 12849 0 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 snd_hda_codec_idt 60251 1 pcmcia 39791 0 joydev 17393 0 snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_idt,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 yenta_socket 27428 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event pcmcia_rsrc 18367 1 yenta_socket wacom_w8001 12906 0 irda 185517 0 arc4 12473 2 iwl3945 73111 0 iwl_legacy 71134 1 iwl3945 mac80211 436455 2 iwl3945,iwl_legacy cfg80211 178679 3 iwl3945,iwl_legacy,mac80211 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq dm_multipath 22710 0 pcmcia_core 21511 3 pcmcia,yenta_socket,pcmcia_rsrc psmouse 96619 0 apanel 12718 0 serport 12808 1 serio_raw 13027 0 crc_ccitt 12595 1 irda mac_hid 13077 0 snd 62064 15 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_t imer,snd_seq_device input_polldev 13648 1 apanel soundcore 14635 1 snd snd_page_alloc 14115 2 snd_hda_intel,snd_pcm lp 17455 0 fujitsu_laptop 18504 0 parport 40930 3 parport_pc,ppdev,lp dm_raid45 76451 0 xor 25987 1 dm_raid45 dm_mirror 21822 0 dm_region_hash 16065 1 dm_mirror dm_log 18193 3 dm_raid45,dm_mirror,dm_region_hash sdhci_pci 18324 0 sdhci 28241 1 sdhci_pci sky2 49545 0 i915 414939 3 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915

  Read the article

• Ubuntu, No wireless networks found after correctly installed madwifi

  - by Peter

  Hi, I just installed madwifi on my MSI laptop with an Atheros AR5001 wifi card & Lucid. As far as I can see and according to System - Administration - Hardware drivers the install was successful and the card + driver is up and running. However, I don't see any wireless network (my windows PC can see about 5 wireless networks). I tried it with the network manager applet as well as with wicd. If I try to connect to "Hidden Wireless Network" via nm-applet, it will start to connect for a while but is unable too (although I supply it with the correct WEP settings & key) So, I'm unable to use my wireless network. What am i doing wrong? Some information about my system: iwconfig lo no wireless extensions. eth0 no wireless extensions. wifi0 no wireless extensions. ath0 IEEE 802.11g ESSID:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:0 kb/s Tx-Power:17 dBm Sensitivity=1/1 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=0/70 Signal level=-96 dBm Noise level=-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 pan0 no wireless extensions. ifconfig ath0 Link encap:Ethernet HWaddr 00:15:af:cf:e2:ca inet6 addr: fe80::215:afff:fecf:e2ca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth0 Link encap:Ethernet HWaddr 00:21:85:4d:82:78 inet addr:192.168.2.101 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::221:85ff:fe4d:8278/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3800 errors:0 dropped:0 overruns:0 frame:0 TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3940261 (3.9 MB) TX bytes:525218 (525.2 KB) Interrupt:27 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) wifi0 Link encap:UNSPEC HWaddr 00-15-AF-CF-E2-CA-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3497 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:280 RX bytes:0 (0.0 B) TX bytes:179947 (179.9 KB) Interrupt:16 lshw -C network *-network description: Wireless interface product: AR5001 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wifi0 version: 01 serial: 00:15:af:cf:e2:ca width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath_pci latency=0 multicast=yes wireless=IEEE 802.11g resources: irq:16 memory:fd7f0000-fd7fffff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 01 serial: 00:21:85:4d:82:78 size: 100MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.2.101 latency=0 link=yes multicast=yes port=MII speed=100MB/s resources: irq:27 ioport:c800(size=256) memory:fe2ff000-fe2fffff memory:fe2c0000-fe2dffff(prefetchable) lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:04.0 PCI bridge: ATI Technologies Inc Device 7914 00:06.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 2) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 05:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 06:04.0 CardBus bridge: O2 Micro, Inc. OZ711MP1/MS1 MemoryCardBus Controller (rev 21) 06:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 06:04.3 Bridge: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 06:04.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) less /proc/modules | grep ath ath_rate_sample 11476 1 - Live 0xf812b000 ath_pci 193197 0 - Live 0xf85c3000 wlan 222892 5 wlan_wep,wlan_scan_sta,ath_rate_sample,ath_pci, Live 0xf8537000 ath_hal 398604 3 ath_rate_sample,ath_pci, Live 0xf8480000 I've been at this for hours now, also tried ndiswrapper and ath5k drivers with no luck, and really could use some help. Cheers.

  Read the article

• Pluscom MAC address shows up but "wireless unavailable"

  - by Luigi

  I've got a pluscom pci card plugged into my desktop and although the mac address shows up in network manager, it says "Wireless unavailable". I'm using Ubuntu 12.10 Gnome Shell Remix... edgar@edgarQuantal:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off edgar@edgarQuantal:~$ ifconfig eth0 Link encap:Ethernet HWaddr 6c:f0:49:02:1f:b8 inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::6ef0:49ff:fe02:1fb8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1425 errors:0 dropped:0 overruns:0 frame:0 TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:995753 (995.7 KB) TX bytes:134079 (134.0 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:363 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:40828 (40.8 KB) TX bytes:40828 (40.8 KB) It looks the same as the problem as here, seems quite complicated: http://ubuntuforums.org/showthread.php?t=1993226 Tried downloading the driver but i get this: "Unpacking firmware-ralink (from .../firmware-ralink_0.36_all.deb) ... dpkg: error processing /home/edgar/Downloads/firmware-ralink_0.36_all.deb (--install): trying to overwrite '/lib/firmware/rt2870.bin', which is also in package linux-firmware 1.95"

  Read the article

• Can not connect to wireless on 12.04 with Intel WiFi Link 5100

  - by WiData

  I am having problem in connecting to wifi. I have dual boot (Windows 7 and Ubuntu 12.04) on my Dell Studio 15. I upgraded to 12.04 quite some time ago (at least one month) from 11.10. Everything was working fine till yesterday. Since yesterday I can see the list of available Wifi connection but does not connect to any or if connects (after hours of trying) then disconnects after few minutes. My wifi interface is Intel WiFi Link 5100 AGN. However the problem is on both Windows and Ubuntu. Here are outputs of some commands which may be useful for those interested in helping: ~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:22:19:fa:65:bb UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:794 errors:0 dropped:0 overruns:0 frame:0 TX packets:794 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:56280 (56.2 KB) TX bytes:56280 (56.2 KB) wlan0 Link encap:Ethernet HWaddr 00:22:fb:d2:fc:ce UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:239 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:53603 (53.6 KB) Here is the output for the command sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fb:d2:fc:ce width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-48-generic-pae firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:f8000000-f8001fff My kernel version is kernel version 3.2.0-48-generic-pae I also checked this post which was helpful. But I am not sure if what is the exact problem. Any suggestions will be helpful. Should I be changing the firmware/driver? Currently my /lib/firmware has following iwlwifi files /lib/firmware/iwlwifi-1000-5.ucode /lib/firmware/iwlwifi-5000-5.ucode /lib/firmware/iwlwifi-100-5.ucode /lib/firmware/iwlwifi-5150-2.ucode /lib/firmware/iwlwifi-105-6.ucode /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-135-6.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-2000-6.ucode /lib/firmware/iwlwifi-6000g2a-6.ucode /lib/firmware/iwlwifi-2030-6.ucode /lib/firmware/iwlwifi-6000g2b-6.ucode /lib/firmware/iwlwifi-3945-2.ucode /lib/firmware/iwlwifi-6050-5.ucode /lib/firmware/iwlwifi-4965-2.ucode Thanks a lot for the help.

  Read the article

• How do I get wireless working on a Dell Inspiron 510m?

  - by user17449

  Why WiFi don't work in my Dell Inspiron 510m with Ubuntu 10.04? Is that usefull? inspiron@Inspiron:~$ rfkill list all inspiron@Inspiron:~$ sudo lshw -C network [sudo] password for inspiron: *-network:0 DISABLED description: Wireless interface product: PRO/Wireless LAN 2100 3B Mini PCI Adapter vendor: Intel Corporation physical id: 3 bus info: pci@0000:01:03.0 logical name: eth1 version: 04 serial: 00:0c:f1:5b:5d:40 width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2100 driverversion=git-1.2.2 firmware=712.0.3:3:00000001 latency=32 link=no maxlatency=34 mingnt=2 multicast=yes wireless=unassociated resources: irq:5 memory:fcffe000-fcffefff *-network:1 description: Ethernet interface product: 82801DB PRO/100 VE (MOB) Ethernet Controller vendor: Intel Corporation physical id: 8 bus info: pci@0000:01:08.0 logical name: eth0 version: 81 serial: 00:11:43:41:d8:b8 size: 10MB/s capacity: 100MB/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=half firmware=N/A ip=192.168.0.2 latency=32 link=no maxlatency=56 mingnt=8 multicast=yes port=MII speed=10MB/s resources: irq:11 memory:fcffd000-fcffdfff ioport:ecc0(size=64) inspiron@Inspiron:~$ iwconfig wlan0 wlan0 No such device inspiron@Inspiron:~$ ifconfig -a eth0 Link encap:Ethernet Endereço de HW 00:11:43:41:d8:b8 inet end.: 192.168.0.2 Bcast:192.168.0.255 Masc:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet Endereço de HW 00:0c:f1:5b:5d:40 BROADCAST MULTICAST MTU:1500 Métrica:1 pacotes RX:0 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:0 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) IRQ:5 Endereço de E/S:0xe000 Memória:fcffe000-fcffefff lo Link encap:Loopback Local inet end.: 127.0.0.1 Masc:255.0.0.0 endereço inet6: ::1/128 Escopo:Máquina UP LOOPBACK RUNNING MTU:16436 Métrica:1 pacotes RX:628 erros:0 descartados:0 excesso:0 quadro:0 Pacotes TX:628 erros:0 descartados:0 excesso:0 portadora:0 colisões:0 txqueuelen:0 RX bytes:50104 (50.1 KB) TX bytes:50104 (50.1 KB) inspiron@Inspiron:~$ nm-tool NetworkManager Tool State: connected - Device: eth1 ----------------------------------------------------------------- Type: 802.11 WiFi Driver: ipw2100 State: unavailable Default: no HW Address: 00:0C:F1:5B:5D:40 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: e100 State: unmanaged Default: no HW Address: 00:11:43:41:D8:B8 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: off inspiron@Inspiron:~$

  Read the article

• Can't access local network when connect to pppoe

  - by shantanu

  I am using DSL(PPPOE) connection in ubuntu. It has two part (I am not sure), when I just connect the cable, system automatically get an IP address started with 172.x.x.x(DHCP). When I connect using username/password (PPPOE) I get another IP started with 10.x.x.x and can access internet but can't access some local IP (in my LAN), which are some FTP, media server provided by my ISP. I complained about that to my ISP but they reply Windows is working It's true, Windows 7 is working fine with this settings. I can access internet and local server at the same time. Also I use a WIFI router (TP-link TL-WR340G/TL-WR340GD) which result the same problem. So when I connect cable directly to system and use Windows 7 than everything is fine. Otherwise problem. Similar problem discussed here. Edit before connect. route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.100.0.1 0.0.0.0 UG 0 0 0 eth0 172.100.0.0 0.0.0.0 255.255.0.0 U 1 0 0 eth0 after connect. Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 10.12.44.91 0.0.0.0 UG 0 0 0 ppp0 10.12.44.91 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 ifconfig after connect eth0 Link encap:Ethernet HWaddr 74:d0:2b:d5:b3:6c inet6 addr: fe80::76d0:2bff:fed5:b36c/64 Scope:Link inet6 addr: 2002:ac64:154:c:76d0:2bff:fed5:b36c/64 Scope:Global inet6 addr: fec0::c:76d0:2bff:fed5:b36c/64 Scope:Site UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26582 errors:0 dropped:18 overruns:0 frame:0 TX packets:2340 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2542063 (2.5 MB) TX bytes:244938 (244.9 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:4118 errors:0 dropped:0 overruns:0 frame:0 TX packets:4118 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:336759 (336.7 KB) TX bytes:336759 (336.7 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:10.12.44.95 P-t-P:10.12.44.91 Mask:255.255.255.255 inet6 addr: fe80::a536:c7ae:e079:d88d/10 Scope:Link UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:689 errors:0 dropped:0 overruns:0 frame:0 TX packets:744 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:385746 (385.7 KB) TX bytes:75296 (75.2 KB) I used network manager to create network(DSL connection)

  Read the article

• Wireless Broadcom 4313 not working on Ubuntu 12.04

  - by user88568

  It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

  Read the article

• Atheros AR928X wireless connection makes neighbourhood machine drop off line

  - by funicorn

  I have an Acer laptop with Atheros AR928X wireless card installed, supported by ath9k driver in the linux kernel. There are other 5 computers sharing wireless connection via a TPLink 150Mbit/s wireless router. At first I found the network is a little bit slower than it's in Windows7, which I accepted as it should be. However a very strange thing is, each time I connected to the router and downloaded stuff for a while, one of the computers running Windows7 in my local network dropped off from the router. And if I run my laptop under Windows7, everything is fine. What's even stranger is although the network becomes slower, only the certain computer drops and totally freezes in connection with the router. I'm not willing to conclude it's due to the unhealthy connection from my laptop to the router, however we have confirmed this for more than one times and there is no problem with the network when I'm running WIndows7. I'm extremely confused about what's going on. As a Linux user running Ubuntu over 5 years, I am awared that wireless driver in Linux is badly notorious of lack of stability and slow speed. But is it so bad that the unhealthy wireless connection can do damage to another computer in the same local network? I do see a lot of "Tx excessive retries" in iwconfig output. But how exactly does this happen ? Thanks for your help. I guess I have to use this answer box to show the outputs $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=47/70 Signal level=-63 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:2 Invalid misc:23 Missed beacon:0 To show what's wrong with the wireless connection, I ran iwconfig again within 3 minutes, during which time I hardly did anything and the network was not much busy than being nearly idle $ sudo iwconfig wlan0 IEEE 802.11bgn ESSID:"TP-LINK111" Mode:Managed Frequency:2.427 GHz Access Point: E0:05:C5:E8:A9:92 Bit Rate=121.5 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:9 Invalid misc:28 Missed beacon:0 You can see Tx excessive retires and Invalid misc increase very quickly. $ sudo iwlist wlan0 modu wlan0 unknown modulation information. $ sudo iwlist wlan0 channel wlan0 13 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Channel 12 : 2.467 GHz Channel 13 : 2.472 GHz Current Frequency:2.427 GHz (Channel 4)

  Read the article

• Can't get Wireless to work! (Fujitsu siemens ESPRIMO Mobile u9200) Ubuntu 12.4

  - by Martin Oscarsson

  I can't get wireless to work on my computer. I have recently installed 12.04. Computer name: (Fujitsu siemens ESPRIMO Mobile u9200) Hardware button starts bluetooth - so can't start that way. Have searched the Internet for help but can't find any on my specific problem! State: connected (global) - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no *-network beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. HERE IS ALL THE NETWORK INFO: ellika@ellikas:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13778 errors:0 dropped:0 overruns:0 frame:0 TX packets:9510 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14022669 (14.0 MB) TX bytes:1001621 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig [sudo] password for ellika: eth0 Link encap:Ethernet HWaddr 00:1e:33:00:96:9a inet addr:192.168.1.26 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe00:969a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13801 errors:0 dropped:0 overruns:0 frame:0 TX packets:9528 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:14024965 (14.0 MB) TX bytes:1002836 (1.0 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1542 errors:0 dropped:0 overruns:0 frame:0 TX packets:1542 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:125040 (125.0 KB) TX bytes:125040 (125.0 KB) ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ phy0 Wireless LAN phy0: command not found ellika@ellikas:~$ rfkill Usage: rfkill [options] command Options: --version show version (0.4-1ubuntu2 (Ubuntu)) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm ellika@ellikas:~$ sudo rf-kill unblock all sudo: rf-kill: kommandot hittades inte ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sedan sudo ifconfig wlan0 sedan: command not found ellika@ellikas:~$ sudo ifconfig wlan0 wlan0 Link encap:Ethernet HWaddr 00:22:5f:3f:63:76 BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ellika@ellikas:~$ ^C ellika@ellikas:~$ ^C ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operationen inte möjlig p.g.a. RF-kill ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ellika@ellikas:~$ sudo rfkill unblock all ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" ^[[C^[[C^[[C^[[C^[[C^[[B wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.4 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.451/10.517/10.631/0.062 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux ellika@ellikas:~$ ellika@ellikas:~$ clear ellika@ellikas:~$ echo -e "sudo lshw --class network:\n\n$(sudo lshw -c network)\n\nlspci -nnn | grep Ethernet:\n\n$(lspci -nnn | grep Ethernet)\n\nlsusb:\n\n$(lsusb)\n\niwlist wlan0 scanning:\n\n$(iwlist wlan0 scanning)\n\nrfkill list:\n\n$(rfkill list)\n\nping -c 5 google.com:\n\n$(ping -c 5 google.com)\n\nhost google.com 8.8.8.8:\n\n$(host google.com 8.8.8.8)\n\nlsb_release -a:\n\n$(lsb_release -a)\n\nuname -a:\n\n$(uname -a)" wlan0 Failed to read scan data : Network is down No LSB modules are available. sudo lshw --class network: *-network beskrivning: Ethernet interface produkt: 88E8055 PCI-E Gigabit Ethernet Controller tillverkare: Marvell Technology Group Ltd. physical id: 0 bus info: pci@0000:04:00.0 logiskt namn: eth0 version: 14 serienummer: 00:1e:33:00:96:9a storlek: 100Mbit/s kapacitet: 1Gbit/s bredd: 64 bits klocka: 33MHz förmågor: pm vpd msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation konfiguration: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full firmware=N/A ip=192.168.1.26 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resurser: irq:44 memory:f8000000-f8003fff ioport:3000(storlek=256) memory:f2000000-f201ffff *-network INAKTIVERAD beskrivning: Trådlöst gränssnitt produkt: AR242x / AR542x Wireless Network Adapter (PCI-Express) tillverkare: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logiskt namn: wlan0 version: 04 serienummer: 00:22:5f:3f:63:76 bredd: 64 bits klocka: 33MHz förmågor: pm msi pciexpress msix bus_master cap_list ethernet physical wireless konfiguration: broadcast=yes driver=ath5k driverversion=3.2.0-30-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bg resurser: irq:18 memory:fa000000-fa00ffff lspci -nnn | grep Ethernet: 04:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller [11ab:4363] (rev 14) 06:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 04) lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 05e3:0715 Genesys Logic, Inc. USB 2.0 microSD Reader Bus 001 Device 003: ID 05c8:0103 Cheng Uei Precision Industry Co., Ltd (Foxlink) FO13FF-65 PC-CAM iwlist wlan0 scanning: rfkill list: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes ping -c 5 google.com: PING google.com (173.194.32.34) 56(84) bytes of data. 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=1 ttl=55 time=10.6 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=2 ttl=55 time=10.5 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=3 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=4 ttl=55 time=10.4 ms 64 bytes from arn06s02-in-f2.1e100.net (173.194.32.34): icmp_req=5 ttl=55 time=10.5 ms --- google.com ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 10.476/10.522/10.602/0.045 ms host google.com 8.8.8.8: Using domain server: Name: 8.8.8.8 Address: 8.8.8.8#53 Aliases: google.com has address 173.194.32.36 google.com has address 173.194.32.38 google.com has address 173.194.32.41 google.com has address 173.194.32.37 google.com has address 173.194.32.35 google.com has address 173.194.32.39 google.com has address 173.194.32.33 google.com has address 173.194.32.34 google.com has address 173.194.32.46 google.com has address 173.194.32.32 google.com has address 173.194.32.40 google.com has IPv6 address 2a00:1450:400f:801::100e google.com mail is handled by 40 alt3.aspmx.l.google.com. google.com mail is handled by 20 alt1.aspmx.l.google.com. google.com mail is handled by 30 alt2.aspmx.l.google.com. google.com mail is handled by 50 alt4.aspmx.l.google.com. google.com mail is handled by 10 aspmx.l.google.com. lsb_release -a: Distributor ID: Ubuntu Description: Ubuntu 12.04.1 LTS Release: 12.04 Codename: precise uname -a: Linux ellikas 3.2.0-30-generic-pae #48-Ubuntu SMP Fri Aug 24 17:14:09 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• How to troubleshoot ethernet port on laptop

  - by Psallas Vassilios

  I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

  Read the article

< Previous Page | 10 11 12 13 14 15 16 17 18 19 20 21  | Next Page >