Search Results

Search found 12645 results on 506 pages for 'maintenance mode'.

Page 140/506 | < Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >

• How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

  - by MoLE

  I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

  Read the article

• Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

  - by Korakys

  Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

  Read the article

• Splitting Pygame functionality between classes or modules?

  - by sec_goat

  I am attempting to make my pygame application more modular so that different functionalities are split up into different classes and modules. I am having some trouble getting pygame to allow me to draw or load images in secondary classes when the display has been set and pygame.init() has been done in my main class. I have typically used C# and XNA to accomplish this sort of behavior, but this time I need to use python. How do I init pygame in class1, then create an instance of class2 which loads and converts() images. I have tried pygame.init() in class 2 but then it tells me no display mode has been set, when it has been set in class1. I am under the impression i do not wnat to create multiple pygame.displays as that gets problematic I am probably missing something pythonic and simple but I am not sure what. How do I create a Display class, init python and then have other modules do my work like loading images, fonts etc.? here is the simplest version of what I am doing: class1: def __init__(self): self.screen = pygame.display.set_mode((600,400)) self.imageLoader = class2() class2: def __init__(self): self.images = ['list of images'] def load_images(): self.images = os.listdir('./images/') #get all images in the images directory for img in self.images: #read all images in the directory and load them into pygame new_img = pygame.image.load(os.path.join('images', img)).convert() scale_img = pygame.transform.scale(new_img, (pygame.display.Info().current_w, pygame.display.Info().current_h)) self.images.append(scale_img) if __name__ == "__main__": c1 = class1() c1.imageLoader.load_images() Of course when it tries to load an convert the images it tells me pygame has not been initialized, so i throw in a pygame.init() in class2 ( i have heard it is safe to init multiple times) and then the error goes to pygame.error: No video mode has been set

  Read the article

• Can I use standard tools to get the full name of a process, when its name has embedded spaces?

  - by fred.bear

  I understand that it may be a rare situation for an executable to have spaces in it, but it could happen. An example may be the best explanation.. Using standard tools, I want to determine the location (on the file system) of the executable which owns(?) the current window... get the current window ID ...(xdotool getactivewindow ) use the ID to get the PID ...(wmctrl -p -l | sed ... ID .... use the PID to get the executable's name ... (ps -A ... here is where I run into problems ! Whith ps, when listing only the executable's name (-o ucmd), it truncates the name to 15 characters, so this rules out this option for any name which is longer. Widening the column (-o ucmd:99 ) makes no difference.. If pgrep is anything to go by, its matching is limited to 15 because of stat (see: info pgrep).. Listings in variants of "full" mode (eg -A w w) are not useful when the name concerned has spaces in it, because this name is separated from its args by another space!.. Also, in "full" mode, if the process was started by a link, the name of the link is shown, rather than the executable's name. Is there some way to do this (using standard tools)? ...or are spaces a show stopper here?

  Read the article

• How to fix Black screen?

  - by stupidwhiteguy

  so I recently had my question deleted and merged into a standard how to for blank screens. I am relatively new to This type of computer work and i don't understand the steps nessary to diagnose my problem well enough to solve it so this help full how to has me feeling helpless I can use Ctrl + Alt +F1 and log in So how do I use sudo commands to fix the blank screen on my old dell? sudo lsoci -nn tells me my video card is a ATI rage 128 pro ultra tf /var/log/Xorg.0.log tells me Permission denied that is all i get Sudo apt-get install --reinstall unity tried thay also have also tried Apt-get update and upgrade Please dont close this question without providing an actual answer or if you think it is an exact duplicate provide a solution that worked for that question. I see a lot of these questions as closed and there is no real answer given I will try any solutions available and report results so that others can also solve problems not be overwhelmed by overly broad troubleshooting guides that do nothing to help solve specific issues The nomodeset change from quiet splash also yields no results on reboot I still get a blank screen this screen still has contorl alt f1 abilities but that is it contorl alt f8 causes blinking cursor and F7 gets a crazy flash with green and blue then blank screen Contorl alt f1 a log in prompt in text only when run in recovery mode with failsafe graphics its says the syestem is running in low graphics mode your screen graphics card and input device settings could not be detected correctly. You will need to configure these your self how do i do that? I got this /var/log/failsafeX-backup-120909200641.tar as the location of my log files but i have no idea how to axcess sounds work in blank screen also screen responds or flashes after log in is typed and password entered really any help is good I don't even know where to start I believe 12.04 is installed and functioning but i don't think I can see it at the end of the error log it says error setting mtrr (base= oxf0000000, size= 0x01000000, type=1) inappropriate ioctl for device(25) i have tried to provide as much info as I understand how to provide

  Read the article

• Laptop power button not working

  - by DyP

  I have a (seemingly rather exotic) Dell Latitude XT2 notebook running Lubuntu 12.04, fresh install. Tried to get the power button to work as expected (opening lubuntu-logout, just as I think it was meant to be out-of-the box), but no success: power button does nothing but forced power-off on long press. Here some more information, please ask if something more could help: Power button is recognized as a device: xinput lists Power Button as a slave keyboard at /dev/input/event1, and I can run a tool to listen to that device and invoke some action (successfully). But using .config/openbox/lubuntu-rc.xml to assign some action to XF86ShutDown or XF86PowerOff does nothing. Works well for any key of the keyboard. xinput --test reports a keycode (key press, key release) of 124 when pressing & releasing the power button. xmodmap -pk lists 124 mapped to XF86PowerOff which seems correct to me (btw: is this the same as XF86ShutDown?) When assigning another keysymname to the 124 keycode, e.g. 'w', still nothing happens when pressing the power button (no window seems to receive a 'w'). Works well for any key on the keyboard. The outputs of xev for a press/release of the power button irritate me: MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 41, synthetic NO, window 0x2a00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 41, synthetic NO, window 0x2a00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 41, synthetic NO, window 0x0, keys: 93 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (instead of 93, I also get different values) I might have missed something very basic since I'm not very familiar with both openbox/lubuntu and the X input system. Btw.: same goes for three other special buttons on my laptop..

  Read the article

• how do I uninstall old kernel options listed in Grub2? [closed]

  - by user12809

  Possible Duplicate: Is there a way to remove/hide old kernel versions? I installed Ubuntu Tweak in Ubuntu 11.10, went to Janitor, and selected and removed old kernels that appeared there (3.0.0-12). Now, the only installed linux-image that appears as 'Installed' in SPM is the most recent one (3.0.0-13), which is the one I want. It did not however eliminate the kernel listing in Grub 2. At boot: However, at boot, in Grub-2, the following options still appear: 3.0.0-13-generic 3.0.0-13-generic (recovery mode) 3.0.0-12 (generic) (on /dev/sde5) 3.0.0-12 (generic (recovery mode) (on /dev/sde5) And, in Terminal, when I change directory (cd) to /boot, and then list (ls), I get the following listed kernels: 3.0.0-13 2.6.38-12 2.6.38-8 (al There is no change when I sudo update-grub in Terminal 1) what is /dev/sde5, and where is it located in the file system, so i can delete it? 2) why the differences between what appears as installed in SPM, what appears at boot in Grub2, and what shows when I list the contents of Grub2 in Terminal? Ultimately, I simply want to remove the 3.0.0-12 kernel options at boot in Grub2. How do I best and simplest do that? Thanks again donofrij is online now Report Post Edit/Delete Message Reply With Quote Multi-Quote This Message Quick reply to this message

  Read the article

• How can I install from a 9.04 live USB/DVD?

  - by bstpierre

  I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

  Read the article

• New Versions of Whitepapers are available

  - by Anthony Shorten

  The set of whitepapers that are available are progressively being updated and republished to reflect new versions of the products as well new advice for existing customers. A number of whitepapers are now available that have been updated (the My Oracle Support Doc Id is indicated): What’s New in Oracle Utilities Application Framework V4 (Doc Id: 1177265.1) -  This has been updated for the latest facilities in Oracle Utilities Application Framework V4.1. Batch Best Practices (Doc Id: 836362.1) – This has been updated for newer advice including more details of how CLUSTERED mode works, how to migrate to CLUSTERED mode and some configuration examples to cover typical configuration scenarios. Oracle Utilities Application Framework Architecture Guidelines (Doc Id: 807068.1) – This has been updated to reflect additional architecture advice. Performance Troubleshooting Guides (Doc Id: 560382.1) – This has been updated for the latest facilities in Oracle Utilities Application Framework V4.1 and includes additional techniques that have been used by customers to track performance. The whitepapers apply to all Oracle Utilities Application Framework Products which at the present time includes: Oracle Utilities Customer Care And Billing (V2.x) Oracle Enterprise Taxation Management (V2.x) Oracle Utilities Business Intelligence (V2.x) Oracle Utilities Meter Data Management (V2.x) Oracle Utilities Mobile Workforce Management (V2.x) Oracle Utilities Smart Grid Gateway (V2.x) Additional whitepapers and updates will be posted as they are available.

  Read the article

• Problem with scrolling background in one OpenGL loop

  - by GvS

  I have 960x3000 map image in png and I'm scrolling it in a loop like this (it's called in 60 FPS loop): glPushMatrix(); glBindTexture( GL_TEXTURE_2D, mapTex[iBgImg]); glBegin(GL_QUADS); double mtstart = 0.0f - fBgVPos/(double)BgSize; double mtend = mtstart + mtsize; glTexCoord2d(0.0, mtstart); glVertex2f(fBgX, TOP_MARGIN); glTexCoord2d(1.0, mtstart); glVertex2f(fBgX + MAP_WIDTH, TOP_MARGIN); glTexCoord2d(1.0, mtend); glVertex2f(fBgX + MAP_WIDTH, BOTTOM_MARGIN); glTexCoord2d(0.0, mtend); glVertex2f(fBgX, BOTTOM_MARGIN); glEnd(); glPopMatrix(); unfortunately it isn't smooth when the game is in windowed mode. However, it is smooth in full screen mode. I'm using GLFW for windows. Maybe there is something wrong with my method? Is there anything better? Or could this be hardware problem? Edit: Window is created using glfwOpenWindowHint(GLFW_WINDOW_NO_RESIZE, GL_TRUE); glfwOpenWindowHint(GLFW_REFRESH_RATE, 60); and main loop is using glfwSwapInterval(1) to ensure 60 FPS;

  Read the article

• after BIOS splash, will not boot -- asks me to select an OS, but it just reboots

  - by user92040

  I'm running Linux Mint 13 MATE 64-bit. Everything has been working for several weeks. Yesterday, when I tried to boot up my computer, after the BIOS screen flashes I reach a screen with a black background that reads at the top: GNU GRUB version1.99-21ubuntu3.4 Then there is a box in which I can select from the following lines: Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) Linux Mint 13 MATE 64-bit, 3.2.0-31-generic (/dev/sdb2) -- recovery mode Previous Linux versions Memory test (memtest86+) Memory test (memtest86+, serial console 115200) At the bottom it reads: Use the ? and ? keys to select which entry is highlighed. Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line. I have no idea why it started doing this and, worse, I have no idea how to get out of here. No matter which option I select, I can't get it to boot the OS. If I select either of the first two, it reboots to splash the BIOS and then I'm right back where I started. If I choose "Previous Linux versions" I get essentially the same screen with only two choices (which are the same as the first two choices listed above, Linux 13 MATE and the recovery mode). Again, choosing either one of those results in a reboot. If I try to run either of the memtest options, it reads: error: unknown command 'linux16', Press any key to continue... Then it brings me back to the same screen Can anyone help me please? Intel Core i5-2500 ASUS P8Z68-V LX Intel Motherboard G. Skill Ripjaws series F3-12800CL9D-8GBRL (4GB x2) Plextor 128GB M5S Series SSD

  Read the article

• how to override ckeditor events [migrated]

  - by joe

  I am new to ckeditor, I have hard time figuring this issue out. due to my html design; if I try to use the link editor dialog while my ckeditor is maximized, it just doesn't show up, I understand that ckeditor is the top most object in my html page and the link dialog comes underneath it. if now I bring ckeditor to its normal state I will be able to see and use the link dialog. my idea is to slightly override the link button click event as follows: if the editor is in full screen mode, bring it back to the normal state. and keep a flag somewhere so that when I close the link dialog, I can decide whether to bring back the ckeditor to a maximized mode again. now this is easy logic except that I do not know how to override the click event of the link button and keep it work as expected. here's what I have: $().ready(function () { var editor = $('#txa').ckeditor(); CKEDITOR.plugins.registered['link']= { init : function( editor ) { var command = editor.addCommand( 'link', { modes : { wysiwyg:1, source:1 }, exec : function( editor ) { if(editor.commands.maximize.state == 1 ){ alert("maximized"); //....here bring back the editor to UN-maximized state and let the link button event click do the default behavior } else { alert("normal state"); } //2 is normal state //1 is maximized } } ); editor.ui.addButton( 'link',{label : 'YOUR LABEL',command : 'link'}); } } }); html part to make the exemple work: <div> <textarea id="txa"> </textarea> </div> TO BE SHORT: http://jsfiddle.net/Q43QP/ if the editor is maximized, bring it to normal state then show the link dialog.

  Read the article

• Extended service set help [closed]

  - by Cygnus X

  Sorry, this is going to be long and rambly. So, at home my network is set up as such: I have a "master router" that handles DHCP, from there I have a basic 5 port switch, and coming off that, I have a second router that I put in access point mode so that I could have better wireless coverage in my house. I cant seem to access it through a web browser since the master router kicked in and assigned it an ip address. But, i told you all that story, so that i could tell you this story. At the company I work for, they are trying to set up wireless cameras, according to the manual for these, in order to connect these cameras to our network, we need to get into the wireless router and associate the router with the cameras, but the problem is, the network is setup like my home network. Theres a "master router" which is a windows 2003 server, and then a wireless router in AP mode dishing out wireless access. I cant get into the router (by the way I'm not the system admin for the company, nor do i know jack squat about windows server , nor can I easily get in contact with the system admin. (quite the cluster f*k, eh?)) I've tried using wireshark to find the routers ip, dug through arp tables, tried plugging straight into the router, but I cant seem to get into the damn thing. Any ideas/suggestions would be greatly appreciated.

  Read the article

• How do I solve "System is running in low graphics issue" in Ubuntu INSTALLER ?

  - by hellodear

  I made a bootable USB for installing Ubuntu 12.04 LTS alongside Windows 8.1. I inserted my USB device and then booted into it. Then it showed me 2 options - 'Try Ubuntu' or 'Install Ubuntu'. Now I press 'Try Ubuntu' and then it says, "The system is running in low graphics mode". Then I press 'OK'. Then it showed me 4 options. Then again I click 'OK'. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. PS :- I am using Windows 8.1 with dedicated graphic card which is AMD Radeon HD 8670M. I am trying to do this in a Dell Laptop 3537 Inspiron. UPDATE :- I tried running the liveUSB session with nomodeset on and i was able to enter the installer. But when I run boot-repair(so that my Ubuntu gets detected in the GRUB menu) after installing Ubuntu successfully alongside Windows 8(following this tutorial with nomodeset on, I get the following error:- your system is running in legacy mode boot repair done

  Read the article

• How to Boot or "enter" into ubnutu 11.04 (Natty Narwhall) on PS3 after installing it?

  - by Xdm

  After failing to install ubuntu 11.04 Desktop version (burned on a dvd, because iso's file size was 726 Mb), in tried the alternate version (about 686 Mb) which i burned into a CD. During the installation process, i manually partitioned the hard drive using ext3. After the installation, the CD ejects itself and i hit "continue". In the k boot prompt i hit "enter" on my the keyboard. I see i welcome message in a dark background (a kind of full screen terminal/console called CLI i think) and was asked to enter my user name and password. After that, instead of booting into the beautiful desktop of Ubuntu, i saw this: ubuntu@my_name$ It was like a line of command i think, where you can use "sudo" commands. It is called a non-graphic mode i think. My my REAL problem is to enter Ubuntu 11.04 with the chocolate-colored background and the African music drum. I tried many commands to boot into the graphic mode of the system such as Ctr+Alt+F7 but nothing happened. In this case, i just saw numbers showing available blocks. I DON'T UNDERSTAND. I also tried startx and sudo startx without result. I DO bought a PS3 BOTH for gaming and for Ubuntu because i can't afford buying a PC. Please help me with my trouble dear Ubuntu 11.04 users. I am counting on you. All the best Xdm

  Read the article

• 3.2.0-31-generic version doesn't boot

  - by user92526

  12.04 used to work just fine a month ago. Since August, I installed all of the available updates. Since then my mac-pro is acting weird. If I restart the computer, the screen gets stuck in the purple back ground without any texts. Then if I restart again, I can choose what versions of linux I want to run. If I select 3.2.0-31-generic, the machine gets stuck in a state of blinking cursor. If I boot again to run 3.2.0-31-generic recovery mode, the machine gets stuck in a "..... memory freed End of Stack" mode. I can't boot through this kernel. I have to choose an older version of linux like 3.2.0-12-generic to boot into my mac pro, but I have too boot twice to get into this version. I was wondering --if you could provide me a solution to boot the 3.2.0-31-generic version. -- if you could provide me a solution to boot into any version the first time I restart. (Usually I have to kill the first restart) --- If there is an option in linux to choose what version I want to run every time I restart so that I don't have to choose everytime. Thank you

  Read the article

• After tarball restore my PC (tar xvfpz backup.tgz -C /), my sound card and network are not working. How to detect?

  - by axton hunger

  1 . I have a old laptop I installed Ubuntu 12.04 on. (It was ACER) 2 . I booted into single user mode and backed it up via cd / sudo -i tar cvpzf backup.tgz --exclude=/proc --exclude=/dev --exclude=/lost+found --exclude=/backup.tgz --exclude=/mnt --exclude=/sys / 3 . I installed a fresh copy of Ubuntu 1204 on my new laptop (It is Dell) 4 . I boot into single user mode 5 . I backup the existing /boot directory 6 . I untar my backup to restore on to the Dell sudo tar xvfpz backup.tgz -C / 7 . I restore the previous /boot directory again 8 . I boot it up, and my profile and settings are loaded ok but, Ubuntu shows that there is no Sound Card.. I cannot use unity to drag and change volume. I noticed that the network card also doesnt work. ** How do you make ubuntu recognize changed hardware, if the hardware is already configured for a different laptop? Does anyone know?**

  Read the article

• How to configure multiple WCF binding configurations for the same scheme

  - by Sandor Drieënhuizen

  I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

  Read the article

• git | error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied [SOLVED]

  - by Corbin Tarrant

  I am having a strange issue that I can't seem to resolve. Here is what happend: I had some log files in a github repository that I didn't want there. I found this script that removes files completely from git history like so: #!/bin/bash set -o errexit # Author: David Underhill # Script to permanently delete files/folders from your git repository. To use # it, cd to your repository's root and then run the script with a list of paths # you want to delete, e.g., git-delete-history path1 path2 if [ $# -eq 0 ]; then exit 0are still fi # make sure we're at the root of git repo if [ ! -d .git ]; then echo "Error: must run this script from the root of a git repository" exit 1 fi # remove all paths passed as arguments from the history of the repo files=$@ git filter-branch --index-filter "git rm -rf --cached --ignore-unmatch $files" HEAD # remove the temporary history git-filter-branch otherwise leaves behind for a long time rm -rf .git/refs/original/ && git reflog expire --all && git gc --aggressive --prune I, of course, made a backup first and then tried it. It seemed to work fine. I then did a git push -f and was greeted with the following messages: error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied error: Cannot update the ref 'refs/remotes/origin/master'. Everything seems to have pushed fine though, because the files seem to be gone from the GitHub repository, if I try and push again I get the same thing: error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied error: Cannot update the ref 'refs/remotes/origin/master'. Everything up-to-date EDIT $ sudo chgrp {user} .git/logs/refs/remotes/origin/master $ sudo chown {user} .git/logs/refs/remotes/origin/master $ git push Everything up-to-date Thanks! EDIT Uh Oh. Problem. I've been working on this project all night and just went to commit my changes: error: Unable to append to .git/logs/refs/heads/master: Permission denied fatal: cannot update HEAD ref So I: sudo chown {user} .git/logs/refs/heads/master sudo chgrp {user} .git/logs/refs/heads/master I try the commit again and I get: error: Unable to append to .git/logs/HEAD: Permission denied fatal: cannot update HEAD ref So I: sudo chown {user} .git/logs/HEAD sudo chgrp {user} .git/logs/HEAD And then I try the commit again: 16 files changed, 499 insertions(+), 284 deletions(-) create mode 100644 logs/DBerrors.xsl delete mode 100644 logs/emptyPHPerrors.php create mode 100644 logs/trimXMLerrors.php rewrite public/codeCore/Classes/php/DatabaseConnection.php (77%) create mode 100644 public/codeSite/php/init.php $ git push Counting objects: 49, done. Delta compression using up to 2 threads. Compressing objects: 100% (27/27), done. Writing objects: 100% (27/27), 7.72 KiB, done. Total 27 (delta 15), reused 0 (delta 0) To [email protected]:IAmCorbin/MooKit.git 59da24e..68b6397 master -> master Hooray. I jump on http://GitHub.com and check out the repository, and my latest commit is no where to be found. ::scratch head:: So I push again: Everything up-to-date Umm...it doesn't look like it. I've never had this issue before, could this be a problem with github? or did I mess something up with my git project? EDIT Nevermind, I did a simple: git push origin master and it pushed fine.

  Read the article

• Configuring multiple WCF binding configurations for the same scheme doesn't work

  - by Sandor Drieënhuizen

  I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" bindingConfiguration="public" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" bindingConfiguration="public" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

  Read the article

• How to configurie multiple distinct WCF binding configurations for the same scheme

  - by Sandor Drieënhuizen

  I have a set of IIS7-hosted net.tcp WCF services that serve my ASP.NET MVC web application. The web application is accessed over the internet. WCF Services (IIS7) <--> ASP.NET MVC Application <--> Client Browser The services are username authenticated, the account that a client (of my web application) uses to logon ends up as the current principal on the host. I want one of the services to be authenticated differently, because it serves the view model for my logon view. When it's called, the client is obviously not logged on yet. I figure Windows authentication serves best or perhaps just certificate based security (which in fact I should use for the authenticated services as well) if the services are hosted on a machine that is not in the same domain as the web application. That's not the point here though. Using multiple TCP bindings is what's giving me trouble. I tried setting it up like this in my client configuration: <bindings> <netTcpBinding> <binding> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint contract="Server.IService1" binding="netTcpBinding" address="net.tcp://localhost:8081/Service1.svc"/> <endpoint contract="Server.IService2" binding="netTcpBinding" address="net.tcp://localhost:8081/Service2.svc"/> </client> The server configuration is this: <bindings> <netTcpBinding> <binding portSharingEnabled="true"> <security mode="TransportWithMessageCredential"> <message clientCredentialType="UserName"/> </security> </binding> <binding name="public"> <security mode="Transport"> <message clientCredentialType="Windows"/> </security> </binding> </netTcpBinding> </bindings> <services> <service name="Service1"> <endpoint contract="Server.IService1, Library" binding="netTcpBinding" address=""/> </service> <service name="Service2"> <endpoint contract="Server.IService2, Library" binding="netTcpBinding" address=""/> </service> </services> <serviceHostingEnvironment> <serviceActivations> <add relativeAddress="Service1.svc" service="Server.Service1"/> <add relativeAddress="Service2.svc" service="Server.Service2"/> </serviceActivations> </serviceHostingEnvironment> The thing is that both bindings don't seem to want live together in my host. When I remove either of them, all's fine but together they produce the following exception on the client: The requested upgrade is not supported by 'net.tcp://localhost:8081/Service2.svc'. This could be due to mismatched bindings (for example security enabled on the client and not on the server). In the server trace log, I find the following exception: Protocol Type application/negotiate was sent to a service that does not support that type of upgrade. Am I looking into the right direction or is there a better way to solve this?

  Read the article

• Mac 10.6 Universal Binary scipy: cephes/specfun "_aswfa_" symbol not found

  - by Markus

  Hi folks, I can't get scipy to function in 32 bit mode when compiled as a i386/x86_64 universal binary, and executed on my 64 bit 10.6.2 MacPro1,1. My python setup With the help of this answer, I built a 32/64 bit intel universal binary of python 2.6.4 with the intention of using the arch command to select between the architectures. (I managed to make some universal binaries of a few libraries I wanted using lipo.) That all works. I then installed scipy according to the instructions on hyperjeff's article, only with more up-to-date numpy (1.4.0) and skipping the bit about moving numpy aside briefly during the installation of scipy. Now, everything except scipy seems to be working as far as I can tell, and I can indeed select between 32 and 64 bit mode using arch -i386 python and arch -x86_64 python. The error Scipy complains in 32 bit mode: $ arch -x86_64 python -c "import scipy.interpolate; print 'success'" success $ arch -i386 python -c "import scipy.interpolate; print 'success'" Traceback (most recent call last): File "<string>", line 1, in <module> File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/interpolate/__init__.py", line 7, in <module> from interpolate import * File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/interpolate/interpolate.py", line 13, in <module> import scipy.special as spec File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/__init__.py", line 8, in <module> from basic import * File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/basic.py", line 8, in <module> from _cephes import * ImportError: dlopen(/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so, 2): Symbol not found: _aswfa_ Referenced from: /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so Expected in: flat namespace in /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so Attempt at tracking down the problem It looks like scipy.interpolate imports something called _cephes, which looks for a symbol called _aswfa_ but can't find it in 32 bit mode. Browsing through scipy's source, I find an ASWFA subroutine in specfun.f. The only scipy product file with a similar name is specfun.so, but both that and _cephes.so appear to be universal binaries: $ cd /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/ $ file _cephes.so specfun.so _cephes.so: Mach-O universal binary with 2 architectures _cephes.so (for architecture i386): Mach-O bundle i386 _cephes.so (for architecture x86_64): Mach-O 64-bit bundle x86_64 specfun.so: Mach-O universal binary with 2 architectures specfun.so (for architecture i386): Mach-O bundle i386 specfun.so (for architecture x86_64): Mach-O 64-bit bundle x86_64 Ho hum. I'm stuck. Things I may try but haven't figured out how yet include compiling specfun.so myself manually, somehow. I would imagine that scipy isn't broken for all 32 bit machines, so I guess something is wrong with the way I've installed it, but I can't figure out what. I don't really expect a full answer given my fairly unique (?) setup, but if anyone has any clues that might point me in the right direction, they'd be greatly appreciated. (edit) More details to address questions: I'm using gfortran (GNU Fortran from GCC 4.2.1 Apple Inc. build 5646). Python 2.6.4 was installed more-or-less like so: cd /tmp curl -O http://www.python.org/ftp/python/2.6.4/Python-2.6.4.tar.bz2 tar xf Python-2.6.4.tar.bz2 cd Python-2.6.4 # Now replace buggy pythonw.c file with one that supports the "arch" command: curl http://bugs.python.org/file14949/pythonw.c | sed s/2.7/2.6/ > Mac/Tools/pythonw.c ./configure --enable-framework=/Library/Frameworks --enable-universalsdk=/ --with-universal-archs=intel make -j4 sudo make frameworkinstall Scipy 0.7.1 was installed pretty much as described as here, but it boils down to a simple sudo python setup.py install. It would indeed appear that the symbol is undefined in the i386 architecture if you look at the _cephes library with nm, as suggested by David Cournapeau: $ nm -arch x86_64 /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so | grep _aswfa_ 00000000000d4950 T _aswfa_ 000000000011e4b0 d _oblate_aswfa_data 000000000011e510 d _oblate_aswfa_nocv_data (snip) $ nm -arch i386 /Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/scipy/special/_cephes.so | grep _aswfa_ U _aswfa_ 0002e96c d _oblate_aswfa_data 0002e99c d _oblate_aswfa_nocv_data (snip) however, I can't yet explain its absence.

  Read the article

• Ivy resolve not working with dynamic artifact

  - by richever

  I've been using Ivy a bit but I seem to still have a lot to learn. I have two projects. One is a web app and the other is a library upon which the web app depends. The set up is that the library project is compiled to a jar file and published using Ivy to a directory within the project. In the web app build file, I have an ant target that calls the Ivy resolve ant task. What I'd like to do is have the web app using the dynamic resolve mode during development (on developer's local machines) and default resolve mode for test and production builds. Previously I was appending a time stamp to the library archive file so that Ivy would notice changes in file when the web app tried to resolve its dependency on it. Within Eclipse this is cumbersome because, in the web app, the project had to be refreshed and the build path tweaked every time a new library jar was published. Publishing a similarly named jar file every time would, I figure, only require developers to refresh the project. The problem is that the web app is unable to retrieve the dynamic jar file. The output I get looks something like this: resolve: [ivy:configure] :: Ivy 2.1.0 - 20090925235825 :: http://ant.apache.org/ivy/ :: [ivy:configure] :: loading settings :: file = /Users/richard/workspace/webapp/web/WEB-INF/config/ivy/ivysettings.xml [ivy:resolve] :: resolving dependencies :: com.webapp#webapp;[email protected] [ivy:resolve] confs: [default] [ivy:resolve] found com.webapp#library;latest.integration in local [ivy:resolve] :: resolution report :: resolve 142ms :: artifacts dl 0ms --------------------------------------------------------------------- | | modules || artifacts | | conf | number| search|dwnlded|evicted|| number|dwnlded| --------------------------------------------------------------------- | default | 1 | 0 | 0 | 0 || 0 | 0 | --------------------------------------------------------------------- [ivy:resolve] [ivy:resolve] :: problems summary :: [ivy:resolve] :::: WARNINGS [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :: UNRESOLVED DEPENDENCIES :: [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :: com.webapp#library;latest.integration: impossible to resolve dynamic revision [ivy:resolve] :::::::::::::::::::::::::::::::::::::::::::::: [ivy:resolve] :::: ERRORS [ivy:resolve] impossible to resolve dynamic revision for com.webapp#library;latest.integration: check your configuration and make sure revision is part of your pattern [ivy:resolve] [ivy:resolve] :: USE VERBOSE OR DEBUG MESSAGE LEVEL FOR MORE DETAILS BUILD FAILED /Users/richard/workspace/webapp/build.xml:71: impossible to resolve dependencies: resolve failed - see output for details The web app resolve target looks like this: <target name="resolve" depends="load-ivy"> <ivy:configure file="${ivy.dir}/ivysettings.xml" /> <ivy:resolve file="${ivy.dir}/ivy.xml" resolveMode="${ivy.resolve.mode}"/> <ivy:retrieve pattern="${lib.dir}/[artifact]-[revision].[ext]" type="jar" sync="true" /> </target> In this case, ivy.resolve.mode has a value of 'dynamic' (without quotes). The web app's Ivy file is simple. It looks like this: <ivy-module version="2.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="http://ant.apache.org/ivy/schemas/ivy.xsd"> <info organisation="com.webapp" module="webapp"/> <dependencies> <dependency name="library" rev="${ivy.revision.default}" revConstraint="${ivy.revision.dynamic}" /> </dependencies> </ivy-module> During development, ivy.revision.dynamic has a value of 'latest.integration'. While, during production or test, 'ivy.revision.default' has a value of '1.0'. Any ideas? Please let me know if there's any more information I need to supply. Thanks!

  Read the article

• Dynamic Scoped Resources in WPF/XAML?

  - by firoso

  I have 2 Xaml files, one containing a DataTemplate which has a resource definition for an Image brush, and the other containing a content control which presents this DataTemplate. The data template is bound to a view model class. Everything seems to work EXCEPT the ImageBrush resource, which just shows up white... Any ideas? File 1: DataTemplate for ViewModel <ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:vm="clr-namespace:SEL.MfgTestDev.ESS.ViewModel" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d"> <DataTemplate DataType="{x:Type vm:PresenterViewModel}"> <DataTemplate.Resources> <ImageBrush x:Key="PresenterTitleBarFillBrush" TileMode="Tile" Viewbox="{Binding Path=FillBrushDimensions, Mode=Default}" ViewboxUnits="Absolute" Viewport="{Binding Path=FillBrushPatternSize, Mode=Default}" ViewportUnits="Absolute" ImageSource="{Binding Path=FillImage, Mode=Default}"/> </DataTemplate.Resources> <Grid d:DesignWidth="1440" d:DesignHeight="900"> <Grid.ColumnDefinitions> <ColumnDefinition Width="*"/> <ColumnDefinition Width="192"/> </Grid.ColumnDefinitions> <Grid.RowDefinitions> <RowDefinition Height="120"/> <RowDefinition Height="*"/> </Grid.RowDefinitions> <DockPanel HorizontalAlignment="Stretch" Width="Auto" LastChildFill="True" Background="{x:Null}" Grid.ColumnSpan="2"> <Image Source="{Binding Path=ImageSource, Mode=Default}"/> <Rectangle Fill="{DynamicResource PresenterTitleBarFillBrush}"/> </DockPanel> </Grid> </DataTemplate> </ResourceDictionary> File 2: Main Window Class which instanciates the DataTemplate Via it's view model. <Window x:Class="SEL.MfgTestDev.ESS.ESSMainWindow" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:vm="clr-namespace:SEL.MfgTestDev.ESS.ViewModel" Title="ESS Control Window" Height="900" Width="1440" WindowState="Maximized" WindowStyle="None" ResizeMode="NoResize" DataContext="{Binding}"> <Window.Resources> <ResourceDictionary Source="PresenterViewModel.xaml" /> </Window.Resources> <ContentControl> <ContentControl.Content> <vm:PresenterViewModel ImageSource="XAMLResources\SEL25YearsTitleBar.bmp" FillImage="XAMLResources\SEL25YearsFillPattern.bmp" FillBrushDimensions="0,0,5,110" FillBrushPatternSize="0,0,5,120"/> </ContentControl.Content> </ContentControl> </Window> And for the sake of completeness! The CodeBehind for the View Model using System; using System.Collections.Generic; using System.Text; using System.Windows; using System.Windows.Controls; using System.Windows.Data; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Imaging; using System.Windows.Shapes; namespace SEL.MfgTestDev.ESS.ViewModel { public class PresenterViewModel : ViewModelBase { public PresenterViewModel() { } //DataBindings private ImageSource _imageSource; public ImageSource ImageSource { get { return _imageSource; } set { if (_imageSource != value) { _imageSource = value; OnPropertyChanged("ImageSource"); } } } private Rect _fillBrushPatternSize; public Rect FillBrushPatternSize { get { return _fillBrushPatternSize; } set { if (_fillBrushPatternSize != value) { _fillBrushPatternSize = value; OnPropertyChanged("FillBrushPatternSize"); } } } private Rect _fillBrushDimensions; public Rect FillBrushDimensions { get { return _fillBrushDimensions; } set { if (_fillBrushDimensions != value) { _fillBrushDimensions = value; OnPropertyChanged("FillBrushDimensions"); } } } private ImageSource _fillImage; public ImageSource FillImage { get { return _fillImage; } set { if (_fillImage != value) { _fillImage = value; OnPropertyChanged("FillImage"); } } } } }

  Read the article

• Why Do I See the "In Recovery" Msg, and How Can I Prevent it?

  - by John Hansen

  The project I'm working on creates a local copy of the SQL Server database for each SVN branch you work on. We're running SQL Server 2008 Express with Advanced Services on our local machine to host it. When we create a new branch, the build script will create a new database with the ID of that branch, creates the schema objects, and copies over a selection of data from the production shadow server. After the database is created, it, or other databases on the local machine, will often go into "In Recovery" mode for several minutes. After several refreshes it comes up and is happy, but will occasionally go back into "In Recovery" mode. The database is created in simple recovery mode. The file names aren't specified, so it uses default paths for files. The size of the database after loading data is ~400 megs. It is running in SQL Server 2005 compatibility mode. The command that creates the database is: sqlcmd -S $(DBServer) -Q "IF NOT EXISTS (SELECT [name] FROM sysdatabases WHERE [name] = '$(DBName)') BEGIN CREATE DATABASE [$(DBName)]; print 'Created $(DBName)'; END" ...where $(DBName) and $(DBServer) are MSBuild parameters. I got a nice clean log file this morning. When I turned on my computer it starts all five databases. However, two of them show transactions being rolled forward and backwards. The it just keeps trying to start up all five of the databases. 2010-06-10 08:24:59.74 spid52 Starting up database 'ASPState'. 2010-06-10 08:24:59.82 spid52 Starting up database 'CommunityLibrary'. 2010-06-10 08:25:03.97 spid52 Starting up database 'DLG-R8441'. 2010-06-10 08:25:05.07 spid52 2 transactions rolled forward in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:05.14 spid52 0 transactions rolled back in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:05.14 spid52 Recovery is writing a checkpoint in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:11.23 spid52 Starting up database 'DLG-R8979'. 2010-06-10 08:25:12.31 spid36s Starting up database 'DLG-R8441'. 2010-06-10 08:25:13.17 spid52 2 transactions rolled forward in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:13.22 spid52 0 transactions rolled back in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:13.22 spid52 Recovery is writing a checkpoint in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:18.43 spid52 Starting up database 'Rls QA'. 2010-06-10 08:25:19.13 spid46s Starting up database 'DLG-R8979'. 2010-06-10 08:25:23.29 spid36s Starting up database 'DLG-R8441'. 2010-06-10 08:25:27.91 spid52 Starting up database 'ASPState'. 2010-06-10 08:25:29.80 spid41s Starting up database 'DLG-R8979'. 2010-06-10 08:25:31.22 spid52 Starting up database 'Rls QA'. In this case it kept trying to start the databases continuously until I shut down SQL Server at 08:48:19.72, 23 minutes later. Meanwhile, I actually am able to use the databases much of the time.

  Read the article

< Previous Page | 136 137 138 139 140 141 142 143 144 145 146 147  | Next Page >