Search Results

Search found 3991 results on 160 pages for 'adam price'.

Page 141/160 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

  • explanation of RAM specs, and what do I need for a Gaming rig

    - by ewok
    I am looking into upgrading my custom built PC's RAM. I use the machine mostly for gaming, but I don't really know a ton about RAM, so I wanted to ask a few questions. The research I've done tells me there is a negligible increase in speed for anything above 1600 MHz. is this true or is it worth the extra money to go higher? Other than drawing more power from the PSU, is there any real difference in performance with different voltages (1.5V vs 1.65V)? most of the kits I've found in the 2x4 1600 range have a CAS latency of 9 and timing of 9-9-9-24. For a significant increase in price (usually about 1.5x), I can get either 8 or 7 and lower timing. Is it worth the cost? What I am looking for here is someone to give a good explanation of what the different specs represent, and how that relates to the performance of the machine. Specifically, I'm looking for what specs I need to focus on for a good gaming rig. I am NOT looking for a "buy this, it's the best RAM" without an explanation of why. The information will be much more valuable as it will allow me to make my own informed decision. As they say, give a man a fish, he'll eat for a day. teach a man to fish, and he'll eat for the rest of his life.

    Read the article

  • Extend Linux Desktop to another X Windows Display

    - by unknown (google)
    Hello, I am a long time Linux user of the Xinerama and other technologies for extending a desktop to multiple monitors. However when I travel with my laptop I miss the multi-monitor support I enjoy at home. Recently I acquired a second laptop for a low price. Both laptops are running Fedora (versions 10 and 11 respectively). I use Gnome as my primary desktop environment. I know about synergy. I use synergy all the time to control the screen of other Windows / Linux systems I use. I would like to know, can I sit both my primary and secondary laptops together and achieve a Xinerama-like extended desktop environment? Ideally I would like to start a GNOME session on my primary laptop. And then start a X-Windows Desktop on my secondary laptop and extend my primary laptop's desktop onto it. I would like to be able to move Windows from the primary desktop to the secondary laptop desktop. Would I need to use synergy to do this with some other bit of X-Windows technology? Or is there X-Windows technology that will do all this for me? I am familiar with X Windows ability to display applications remotely. I am also familiar with Nomachine's NoX.

    Read the article

  • Upgrade to Q9550 or i7 920 on a budget?

    - by evan
    I'm planning to upgrade my computer and torn between maxing out the system I have or investing in the X58 architecture. I'm currently using a E6600 Core 2 Duo with 4GB of RAM (800mhz) on an Asus PK5-E motherboard which I built two years ago. My original plan was that one day I'd upgrade machine to 8GB (1066mhz, the max the PK5-E allows) and to the Core 2 QuadQ9550 to give the machine a good four years of life. However, that was before the i7 came out. I use my computer mainly for software development , which I do inside Virtual Machines, and the i7 seems ideal for that because it no longer is limited by the speed of the FSB? And when I looked into it, getting 8GB DDR3 RAM isn't much more expensive than the 8GB of DDR2 and the i7 920 is comparable in price to the Q9550, which doesn't make much sense to me? So the question is it worth swapping the motherboard out for around $250 and upgrading all three components or using that money on SSD or 10rpm drive for the existing system's OS/Apps/Virtual Machine drive? Or just put the $250 towards a completely new machine in a year or two? Would the i7 really give that much of boost compared to the Q9550 for what I'd be using it for? Thanks in advance for your input!!!

    Read the article

  • Ram configuration 4x4 or 2x8?

    - by Carl B
    I am looking to upgrade my Ram to 16gigs and I am wondering if there is any distinct advantage of the way I do it. That being a 4x4 or 2x8 set up. In all my searching there have been a number of pros for each profile. I can find no benchmarck results for either setup as a compaison. So, if there are 2 profiles of the same speed, same voltage, same timing and same cas what would perform better or have a better over all benafit? A few examples from my search - a 4x4 set would lend a benafit in that if one stick failed, you only lose 25% of your Ram vs 50% in a 2x8 set up. a 2x8 set up would have less strain on the memory controler and motherboard. a 2x8 would generate less heat. a 2x8 set up is easier to over clock (not part of my need, but alot of the comparisons circled around the overclocability ease of the 2 stick set up). There is one outstanding benafit that I have found in at least the target company I have looked at and that is price. The 2x8 is nearly half the cost. My motherboard supports a max of 16 gigs and I have a 64 bit OS. Has anyone seen any performance comparisons or is 16 gb just 16 gb no matter how you slice it? And is there any merit to the above pros? Edit: as per the mobo specs - Main Memory • Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600*/1800*/2133* (OC) DRAM, 16GB Max

    Read the article

  • Buying an old laser printer -- what will need to be replaced?

    - by marienbad
    Hi all -- as you can see I'm new. I do IT and wiring for a small local shop but I never deal with printers. I do a LOT of printing, and I'd like to stop spending as much money on it. On my local CL, there is an HP 8100DN (duplex network) printer for a very good price (and the toner is a quarter-cent per page). It has printed 200,000 pages and I don't yet know anything else about it. The model was released in 1999. So my questions: What are the parts that tend to need service on laser printers? On ebay, I see fusers, rollers, DC power boards, and motors. What would you expect to replace soon at 200,000 pages? Are there any good "tests" to find out if certain parts are near failure? Do you have anything to say about the HP 8100 specifically? The bottom line for me is that if there's any chance of repairs costing more than $100, it's not worth it for me.

    Read the article

  • Does anyone know where I could find a 2 input USB voltage meter?

    - by John O
    What we really need is a tiny UPS, of sorts. We'll be hooking up a solar cell and a battery to a single board computer. Currently, that SBC is a custom Pic32 device, and it does it's own UPS and voltage monitoring duties. I've been tasked with trying to replicate all of its features with off the shelf products... and for the most part I've succeeded. But I don't currently have any way to switch between two sources of juice, or monitor when they're getting low. These guys have something: http://www.mini-box.com/picoUPS-100-12V-DC-micro-UPS-system-battery-backup-system I really like it, the price is well within the budget. We might even work it in though it does 12V and I'll probably be using 5V... there are enough engineers on hand to figure out something. But I'd still have no idea what the voltage was for the PV or battery. I was hoping that there was some simple little USB multimeter thing that I could use to monitor this with, but I can't seem to come up with anything. I've found all sorts of cool hardware, but nothing that will help us. Does anyone know of anything?

    Read the article

  • If I run two monitors from two different graphic cards, can I still have Twinview?

    - by rumtscho
    I am planning to get a second 2560x1440 monitor for home. The trouble is, I only have 1xDVI, 1xVGA on my graphics card (a 250 GT). I don't want to buy a new graphics card until the prices for the 500 series have stabilized, so probably not before summer (or will it happen earlier? I don't remember how it was for other series, and I couldn't find long-term price history for video cards). The solution I had in mind is to get the 7600 GS from my old PC, which also has 1xDVI, 1xVGA, and run each monitor on a separate card. I have never done that, and I was wondering 1. If I will be able to run the monitors in Twinview then, or will I be stuck with separate X sessions, and 2. Whether there are some other disadvantages as compared to a single-head graphics card. (I am using the proprietary driver because I need compiz). As an aside, how do I find out whether the DVI port on the old graphics card is dual link?

    Read the article

  • Where can someone store >100GB of pictures online? [closed]

    - by sbi
    A person who is not very computer-savvy needs to store 130GB of photos. The key parameters are: an non-negligible probability that the company selling the storage will be existing, and the data accessible, for at least five years data should be considered safe once uploaded reasonable terms of service: google drive reserving the right to literally do anything they want with their user's data is not acceptable; the possibility that the CIA might look at those pictures is not considered a threat easy to use from Windows, preferably as a drive no nerve-wracking limitations ("cannot upload 10GB/day" or "files 500MB" etc.) that serve no purpose other than pushing the user to the next-higher price plan some upgrade plan: there's currently 10-30GB of new photos per year, with a tendency to increase, which might bust a 150GB limit next January ability to somehow sort the pictures: currently they are sorted into folders, but something alike (tags) would be just as good, if easy enough to apply of course, the pricing is important (although there's a reason this is the last bullet; reasonable data safety is considered more important) Nice to have, but not necessary features would be: additional features related to photos (thumbnail generation, album sharing etc.) access from web and other platforms than Windows (smart phones) Let me stress this again: The person in need of that is able to copy pictures from the camera to the computer, can copy files in the explorer, and uses a web email service. That's about it, there's almost no understanding of what happens under the hood.

    Read the article

  • Inexpensive (used) hardware for Xen virtualization test?

    - by Jason Antman
    Virtualization is one of the areas where I could really use some experience. I also run quite a few services (web, mail, dns, etc.) out of my home. Since most of my hardware is getting a bit old (I'm running on stuff that was surplused years ago...) I decided that it's about time I start renewing some things, and also play around with virtualization a bit more. My plan is to setup a SAN box (simple iSCSI target, relatively inexpensive gigE switch), get a pair (for starters) of new servers, and start building some new stuff with Xen, specifically planning on playing with live migration and full virtualization. Does anyone have recommendations for used, older "servers" (really anything in a rack-mount form factor, I'm not too worried about things like iLO/iLOM for the test nodes) that support VT-x/AMD-V? I'm biased to HP, but it looks like they didn't make Proliants with VT-x/Vanderpool processors until G6 (for the DL360) or so, which is way out of my price range. I'm looking in the sub-$300 range (or less, if possible), used, probably Ebay. Any recommendations are greatly appreciated. Edit:And, to catch this before the comments start coming - these are personal systems. I have first-generation Proliants still in use (I got them as corporate surplus in 05, they've been running since then, and probably were running since 01 or 02 prior to being sold). I don't need anything shiny and new - I've got a bunch of old boxes, at least one complete replacement for every model in use, and that's fine for me (and easy on the wallet).

    Read the article

  • Enterprise level Ticketing and inventory system reccomendations [closed]

    - by TrackingSystem
    My company is sort off at a stand still when it comes to our technician ticketing and inventory system. We currently use Numara TrackIt! - which isn't cutting it to say the least. Dell recommended KACE, but it's web based which is what we would like to avoid. We need a good ticketing and inventory system with the following: Server/Client setup Client supports XP/Windows 7 Ent. Web Based as well as Client is a plus Technician ticketing Active Directory integration Inventory System (Asset tag tracking etc/PO tracking) Exchange integrated - when tickets are made you have an option to send to the requester. Something that will scale well Please, if anyone is a Systems Admin or has knowledge regarding use of a great ticketing system please let me know. We have a large international corporation - price honestly isn't an issue. Keep in mind this will be mainly used for technicians to create tickets, enter inventory(track PCS) and possible even an option to track purchase orders. We want an enterprise level ticketing system with these capabilities please help! Thank you.

    Read the article

  • System requirements for running windows 8 (basic office use) in virtualbox (ubuntu as host os)

    - by Tor Thommesen
    I want to run windows 8 as a guest os with virtualbox on some thinkpad (haven't bought one yet) running Ubuntu 12.04. Apart from virtualizing windows 8 (mostly just for use with the office suite app) my needs are very modest, I don't need much more than emacs and a browser. What I'd like to know is what kind of specs will be necessary to run windows 8 well as a vm, using the office apps. It would be a shame to waste money on overpowered hardware. Are there any official guidelines from oracle or windows on this? Would this lenovo x220, for example, be sufficiently strong? The specs below were taken from this review. Intel Core i5-2520M dual-core processor (2.5GHz, 3MB cache, 3.2GHz Turbo frequency) Windows 7 Professional (64-bit) 12.5-inch Premium HD (1366 x 768) LED Backlit Display (IPS) Intel Integrated HD Graphics 4GB DDR3 (1333MHz) 320GB Hitachi Travelstar hard drive (Z7K320) Intel Centrino Advanced-N 6205 (Taylor Peak) 2x2 AGN wireless card Intel 82579LM Gigabit Ethernet 720p High Definition webcam Fingerprint reader 6-cell battery (63Wh) and optional slice battery (65Wh) Dimensions: 12 (L) x 8.2 (W) x 0.5-1.5 (H) inches with 6-cell battery Weight: 3.5 pounds with 6-cell battery 4.875 pounds with 6-cell battery and optional external battery slice Price as configured: $1,299.00 (starting at $979.00)

    Read the article

  • How many VPS do I need for my website? [duplicate]

    - by michael
    This question already has an answer here: How do you do load testing and capacity planning for web sites? 3 answers I made a website which aims at simulating a trading market. There are a list of prices and corresponding volumes that people want to purchase. Users can purchase at any price any time. My website retrieves the prices and volumes from my database every 2 seconds (I have to update the user's browser frequently to allow them to see the current market). Users' database INSERT query can be sent any time if they purchase. I used ajax to post or get data from my database (sometimes nested ajax calls). So, every 2 seconds, each user will send or retrieve data by using more than 20 database queries (in order to show a users the current prices and volumes). Also, I may have 200 users at a time. I was not using VPS before, and I got banned because of using too much CPU resources on my host. Now, I've purchased VPS*2 from a hosting servers. I have: CPU Speed: 2000 Mhz Memory: 2048 MB Disk Space: 20000 MB Bandwidth: 2000 GB Connection: 40 Mb/s Dedicated IP's 2 IP's Is this enough for my 200 users? Also, which VPS OS is suitable for me? Thank you.

    Read the article

  • Hosted bug tracking system with mercurial repositories (Summary of options & request for opinions)

    - by Mark Booth
    The Question What hosted mercurial repository/bug tracking system or systems have you used? Would you recommend it to others? Are there serious flaws, either in the repository hosting or the bug tracking features that would make it difficult to recommend it? Do you have any other experiences with it or opinions of it that you would like to share? If you have used other non mercurial hosted repository/bug tracking systems, how does it compare? (If I understand correctly, the best format for this type of community-wiki style question is one answer per option, if you have experienced if several) Background I have been looking into options for setting up a bug/issue tracking database and found some valuable advice in this thread and this. But then I got to thinking that a hosted solution might not only solve the problem of tracking bugs, but might also solve the problem we have accessing our mercurial source code repositories while at customer sites around the world. Since we currently have no way to serve mercurial repositories over ssl, when I am at a customer site I have to connect my laptop via VPN to my work network and access the mercurial repositories over a samba share (even if it is just to synce twice a day). This is excruciatingly slow on high latency networks and can be impossible with some customers' firewalls. Even if we could run a TRAC or Redmine server here (thanks turnkey), I'm not sure it would be much quicker as our internet connection is over-stretched as it is. What I would like is for developers to be able to be able to push/pull to/from a remote repository, servicing engineers to be able to pull from a remote repository and for customers (both internal and external) to be able to submit bug/issue reports. Initial options The two options I found were Assembla and Jira. Looking at Assembla I thought the 'group' price looked reasonable, but after enquiring, found that each workspace could only contain a single repository. Since each of our products might have up to a dozen repositories (mostly for libraries) which need to be managed seperately for each product, I could see it getting expensive really quickly. On the plus side, it appears that 'users' are just workspace members, so you can have as many client users (people who can only submit support tickets and track their own tickets) without using up your user allocation. Jira only charges based on the number of users, unfortunately client users also count towards this, if you want them to be able to track their tickets. If you only want clients to be able to submit untracked issues, you can let them submit anonymously, but that doesn't feel very professional to me. More options Looking through MercurialHosting page that @Paidhi suggested, I've added the options which appear to offer private repositories, along with another that I found with a web search. Prices are as per their website today (29th March 2010). Corrections welcome in the future. Anyway, here is my summary, according to the information given on their websites: Assembla, http://www.assembla.com/, looks to be a reasonable price, but suffers only one repository per workspace, so three projects with 6 repos each would use up most of the spaces associated with a $99/month professional account (20 spaces). Bug tracking is based on Trac. Mercurial+Trac support was announced in a blog entry in 2007, but they only list SVN and Git on their Features web page. Cost: $24, $49, $99 & $249/month for 40, 40, unlimited, unlimited users and 1, 10, 20, 100 workspaces. SSL based push/pull? Website https login. BitBucket, http://bitbucket.org/plans/, is primarily a mercurial hosting site for open source projects, with SSL support, but they have an integrated bug tracker and they are cheap for private repositories. It has it’s own issues tracker, but also integrates with Lighthouse & FogBugz. Cost: $0, $5, $12, $50 & $100/month for 1, 5, 15, 25 & 150 private repositories. SSL based push/pull. No https on website login, but supports OpenID, so you can chose an OpenID provider with https login. Codebase HQ, http://www.codebasehq.com/, supports Hg and is almost as cheap as BitBucket. Cost: £5, £13, £21 & £40/month for 3, 15, 30 & 60 active projects, unlimited repositories, unlimited users (except 10 users at £5/month) and 0.5, 2, 4 & 10GB. SSL based push/pull? Website https login? Firefly, http://www.activestate.com/firefly/, by ActiveState looks interesting, but the website is a little light on details, such as whether you can only have one repository per project or not. Cost: $9, $19, & £39/month for 1, 5 & 30 private projects, with a 0.5, 1.5 & 3 GB storage limit. SSL based push/pull? Website https login. Jira, http://www.atlassian.com/software/jira/, isn’t limited by the number of repositories you can have, but by ‘user’. It could work out quite expensive if we want client users to be able to track their issues, since they would need a full user account to be created for them. Also, while there is a Mercurial extension to support jira, there is no ‘Advanced integration’ for Mercurial from Atlassian Fisheye. Cost: $150, $300, $400, $500, $700/month for 10, 25, 50, 100, 100+ users. SSL based push/pull? Website https login. Kiln & FogBugz On Demand, http://fogcreek.com/Kiln/IntrotoOnDemand.html, integrates Kilns mercurial DVCS features with FogBugz, where the combined package is much cheaper than the component parts. Also, the Fogbugz integration is supposedly excellent. *8’) Cost: £30/developer/month ($5/d/m more than either on their own). SSL based push/pull? SourceRepo, http://sourcerepo.com/, also supports HG and is even cheaper than BitBucket & Codebase. Cost: $4, $7 & $13/month for 1, unlimited & unlimited repositories/trac/redmine instances and 500MB, 1GB & 3GB storage. SSL based push/pull. Website https login. Edit: 29th March 2010 & Bounty I split this question into sections, made the questions themselves more explicit, added other options from the research I have done since my first posting and made this community wiki, since I now understand what CW is for. *8') Also, I've added a bounty to encourage people to offer their opinions. At the end of the bounty period, I will award the bounty to whoever writes the best review (good or bad), irrespective of the number of up/down votes it gets. Given that it's probably more important to avoid bad providers than find the absolute best one, 'bad reviews' could be considered more important than good ones.

    Read the article

  • how to update database table in sqlite3 iphone

    - by Ajeet Kumar Yadav
    Hi I am new in Iphone i am developing application that is use database but i am face problem. In My application I am using table view. I am fetch the value from database in the table view this is done after that we also insert value throw text field in that table of database and display that value in table view.I am also use another table in database table name is Alootikki the value of table alootikki is display in other table view in application and user want to add this table alootikki value in first table of database and display that value in table view when we do this value is display only in the table view this is not write in the database table. when value is display and user want to add other data throw text field then only that add value is show first value is remove from table view. I am not able to solve this plz help me. The code is given bellow for database -(void)Data1 { //////databaseName = @"dataa.sqlite"; databaseName = @"Recipe1.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; databasePath =[documentsDir stringByAppendingPathComponent:databaseName]; [self checkAndCreateDatabase]; list1 = [[NSMutableArray alloc] init]; sqlite3 *database; if (sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { if(addStmt == nil) { ////////////const char *sql = "insert into Dataa(item) Values(?)"; const char *sql = " insert into Slist(Incredients ) Values(?)"; if(sqlite3_prepare_v2(database, sql, -1, &addStmt, NULL) != SQLITE_OK) NSAssert1(0, @"Error while creating add statement. '%s'", sqlite3_errmsg(database)); } sqlite3_bind_text(addStmt, 1, [i UTF8String], -1, SQLITE_TRANSIENT); //sqlite3_bind_int(addStmt,1,i); // sqlite3_bind_text(addStmt, 1, [coffeeName UTF8String], -1, SQLITE_TRANSIENT); // sqlite3_bind_double(addStmt, 2, [price doubleValue]); if(SQLITE_DONE != sqlite3_step(addStmt)) NSAssert1(0, @"Error while inserting data. '%s'", sqlite3_errmsg(database)); else //SQLite provides a method to get the last primary key inserted by using sqlite3_last_insert_rowid coffeeID = sqlite3_last_insert_rowid(database); //Reset the add statement. sqlite3_reset(addStmt); // sqlite3_clear_bindings(detailStmt); //} } sqlite3_finalize(addStmt); addStmt = nil; sqlite3_close(database); } -(void)sopinglist { databaseName= @"Recipe1.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; databasePath =[documentsDir stringByAppendingPathComponent:databaseName]; [self checkAndCreateDatabase]; list1 = [[NSMutableArray alloc] init]; sqlite3 *database; if (sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { if(addStmt == nil) { ///////////const char *sql = "insert into Dataa(item) Values(?)"; const char *sql = " insert into Slist(Incredients,Recipename,foodtype ) Values(?,?,?)"; ///////////// const char *sql =" Update Slist ( Incredients, Recipename,foodtype) Values(?,?,?)"; if(sqlite3_prepare_v2(database, sql, -1, &addStmt, NULL) != SQLITE_OK) NSAssert1(0, @"Error while creating add statement. '%s'", sqlite3_errmsg(database)); } /////for( NSString * j in k) sqlite3_bind_text(addStmt, 1, [k UTF8String], -1, SQLITE_TRANSIENT); //sqlite3_bind_int(addStmt,1,i); // sqlite3_bind_text(addStmt, 1, [coffeeName UTF8String], -1, SQLITE_TRANSIENT); // sqlite3_bind_double(addStmt, 2, [price doubleValue]); if(SQLITE_DONE != sqlite3_step(addStmt)) NSAssert1(0, @"Error while inserting data. '%s'", sqlite3_errmsg(database)); else //SQLite provides a method to get the last primary key inserted by using sqlite3_last_insert_rowid coffeeID = sqlite3_last_insert_rowid(database); //Reset the add statement. sqlite3_reset(addStmt); // sqlite3_clear_bindings(detailStmt); //} } sqlite3_finalize(addStmt); addStmt = nil; sqlite3_close(database); } -(void)Data { ////////////////databaseName = @"dataa.sqlite"; databaseName = @"Recipe1.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; databasePath =[documentsDir stringByAppendingPathComponent:databaseName]; [self checkAndCreateDatabase]; list1 = [[NSMutableArray alloc] init]; sqlite3 *database; if (sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { if(detailStmt == nil) { const char *sql = "Select * from Slist "; if(sqlite3_prepare_v2(database, sql, -1, &detailStmt, NULL) == SQLITE_OK) { //NSLog(@"Hiiiiiii"); //sqlite3_bind_text(detailStmt, 1, [t1 UTF8String], -1, SQLITE_TRANSIENT); //sqlite3_bind_text(detailStmt, 2, [t2 UTF8String], -2, SQLITE_TRANSIENT); //sqlite3_bind_int(detailStmt, 3, t3); while(sqlite3_step(detailStmt) == SQLITE_ROW) { NSLog(@"Helllloooooo"); //NSString *item= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 0)]; NSString *item= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 0)]; char *str=( char*)sqlite3_column_text(detailStmt, 0); if( str) { item = [ NSString stringWithUTF8String:str ]; } else { item= @""; } //+ (NSString*)stringWithCharsIfNotNull: (char*)item /// { // if ( item == NULL ) // return nil; //else // return [[NSString stringWithUTF8String: item] //stringByTrimmingCharactersInSet: [NSCharacterSet whitespaceAndNewlineCharacterSet]]; //} //NSString *fame= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 1)]; //NSString *cinemax = [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 2)]; //NSString *big= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 3)]; //pvr1 = pvr; item1=item; //NSLog(@"%@",item1); data = [[NSMutableArray alloc] init]; list *animal=[[list alloc] initWithName:item1]; // Add the animal object to the animals Array [list1 addObject:animal]; //[list1 addObject:item]; } sqlite3_reset(detailStmt); } sqlite3_finalize(detailStmt); // sqlite3_clear_bindings(detailStmt); } } detailStmt = nil; sqlite3_close(database); } (void)recpies { /////////////////////databaseName = @"Data.sqlite"; databaseName = @"Recipe1.sqlite"; NSArray *documentPaths = NSSearchPathForDirectoriesInDomains(NSDocumentDirectory, NSUserDomainMask, YES); NSString *documentsDir = [documentPaths objectAtIndex:0]; databasePath =[documentsDir stringByAppendingPathComponent:databaseName]; [self checkAndCreateDatabase]; list1 = [[NSMutableArray alloc] init]; sqlite3 *database; if (sqlite3_open([databasePath UTF8String], &database) == SQLITE_OK) { if(detailStmt == nil) { //////const char *sql = "Select * from Dataa"; const char *sql ="select *from alootikki"; if(sqlite3_prepare_v2(database, sql, -1, &detailStmt, NULL) == SQLITE_OK) { //NSLog(@"Hiiiiiii"); //sqlite3_bind_text(detailStmt, 1, [t1 UTF8String], -1, SQLITE_TRANSIENT); //sqlite3_bind_text(detailStmt, 2, [t2 UTF8String], -2, SQLITE_TRANSIENT); //sqlite3_bind_int(detailStmt, 3, t3); while(sqlite3_step(detailStmt) == SQLITE_ROW) { //NSLog(@"Helllloooooo"); //NSString *item= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 0)]; NSString *item= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 0)]; char *str=( char*)sqlite3_column_text(detailStmt, 0); if( str) { item = [ NSString stringWithUTF8String:str ]; } else { item= @""; } //NSString *fame= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 1)]; //NSString *cinemax = [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 2)]; //NSString *big= [NSString stringWithUTF8String:(char *)sqlite3_column_text(detailStmt, 3)]; //pvr1 = pvr; item1=item; //NSLog(@"%@",item1); data = [[NSMutableArray alloc] init]; list *animal=[[list alloc] initWithName:item1]; // Add the animal object to the animals Array [list1 addObject:animal]; //[list1 addObject:item]; } sqlite3_reset(detailStmt); } sqlite3_finalize(detailStmt); // sqlite3_clear_bindings(detailStmt); } } detailStmt = nil; sqlite3_close(database); }

    Read the article

  • sage pay testing error

    - by Phil Jackson
    Hi, im trying to test my sage pay integration but to no avail. Here is my code: private function init_sagepay(){ extract( static::$post ); $settings = global_data::get_settings(); $strConnectTo = "TTEST"; $strVirtualDir = "VSPForm-Kit"; $strYourSiteFQDN = global_data::get_web_root(); $strVSPVendorName = $settings->sagepay_vendor; $strEncryptionPassword = "z5p************"; $strCurrency = static::$currency; $strVendorEMail = $settings->sagepay_email; $strTransactionType = "PAYMENT"; $strProtocol = "2.23"; if ( $strConnectTo == "LIVE" ) $strPurchaseURL = "https://live.sagepay.com/gateway/service/vspform-register.vsp"; elseif ( $strConnectTo == "TEST" ) $strPurchaseURL = "https://test.sagepay.com/gateway/service/vspform-register.vsp"; elseif( $strConnectTo == 'TTEST' ) $strPurchaseURL = 'https://test.sagepay.com/Simulator/VSPServerGateway.asp?Service=VendorRegisterTx'; else $strPurchaseURL = "https://test.sagepay.com/Simulator/VSPDirectGateway.asp"; $details = self::get_member_details(); $thisOrderDeteails = 'order details...'; $ThisVendorTxCode = 'fdsdgfd'; $ThisAmount = $total; $ThisCurrency = static::$currency; $ThisDescription = "description..."; $ThisCustomerEmail = $details->email; $ThisCustomerName = $details->first_name . " " . $details->last_name; $ThisVendorEmail = $strVendorEMail; $ThisApplyAVSCV2 = 1; $ThisApply3DSecure = 1; $ThisDeliveryAddress = $address_line_1 . ", " . $address_line_2 . ", " . $address_line_3 . ", " . $address_line_4 . ", " . $country; $ThisDeliveryPostCode = $postcode; $address_full = $ThisDeliveryAddress . ' ' . $ThisDeliveryPostCode; $ThisBillingAddress = $details->address_line_1 . ", " . $details->address_line_2 . ", " . $details->address_line_3 . ", " . $details->address_line_4 . ", " . $details->country; $ThisBillingPostCode = $details->postcode; // new 2.22 fields $ThisContactNumber = $details->home_number; $ThisContactFax = $details->fax_number; $ThisAllowGiftAid = ''; //$ThisApplyAVSCV2 = $_REQUEST[ 'ApplyAVSCV2' ]; //$ThisApply3DSecure = $_REQUEST[ 'Apply3DSecure' ]; $ShoppingBasket = array(); $x = 0; foreach( $items as $item ) { preg_match( "#^\[([^\]]+)\]\[([^\]]+)\]$#is", $item, $match ); $item = $match[1]; $price = $match[2]; $ShoppingBasket[$x][0] = $item; $ShoppingBasket[$x][1] = $price; $x++; } if ( isset( $ShoppingBasket ) ) { $ThisShoppingBasket = $ShoppingBasket; }else{ $ThisShoppingBasket = "OFF"; } //** Build the crypt string plaintext ** $stuff = "VendorTxCode=" . $ThisVendorTxCode . "&"; $stuff .= "Amount=" . $ThisAmount . "&"; $stuff .= "Currency=" . $ThisCurrency . "&"; $stuff .= "Description=" . $ThisDescription . "&"; $stuff .= "SuccessURL=" . $strYourSiteFQDN . "completed.php&"; $stuff .= "FailureURL=" . $strYourSiteFQDN . "notcompleted.php&"; if ($ThisCustomerEmail) { $stuff .= "CustomerEmail=" . $ThisCustomerEmail . "&"; } if ($ThisVendorEmail) { $stuff .= "VendorEmail=" . $ThisVendorEmail . "&"; } if ($ThisCustomerName) { $stuff .= "CustomerName=" . $ThisCustomerName . "&"; } if ($ThisDeliveryAddress) { $stuff .= "DeliveryAddress=" . $ThisDeliveryAddress . "&"; } if ($ThisDeliveryPostCode) { $stuff .= "DeliveryPostCode=" . $ThisDeliveryPostCode . "&"; } if ($ThisBillingAddress) { $stuff .= "BillingAddress=" . $ThisBillingAddress . "&"; } if ($ThisBillingPostCode) { $stuff .= "BillingPostCode=" . $ThisBillingPostCode . "&"; } // new 2.22 fields if ($ThisContactNumber) { $stuff .= "ContactNumber=" . $ThisContactNumber . "&"; } if ($ThisContactFax) { $stuff .= "ContactFax=" . $ThisContactFax . "&"; } if ($ThisAllowGiftAid) { $stuff .= "AllowGiftAid=" . $ThisAllowGiftAid . "&"; } if ($ThisApplyAVSCV2) { $stuff .= "ApplyAVSCV2=" . $ThisApplyAVSCV2 . "&"; } if ($ThisApply3DSecure) { $stuff .= "Apply3DSecure=" . $ThisApply3DSecure . "&"; } //echo $stuff; if ($ThisShoppingBasket=="ON") { $stuff .= "Basket=3:Sony SV-234 DVD Player:1:£170.20:£29.79:£199.99:£199.99:The Fast and The Furious Region 2 DVD:2:£17.01:£2.98:£19.99:£39.98:Delivery:1:£4.99:----:£4.99:£4.99&"; } $stuff .= "EMailMessage=For an update on the status of your order please email us at $ThisVendorEmail"; $crypt = self::base64Encode( self::SimpleXor( $stuff,$strEncryptionPassword ) ); $ThisDate = date('U'); ob_start(); ?> <form action="<?php echo $strPurchaseURL; ?>" method="post" id="sageForm" name="form1"> <input TYPE="hidden" name="VPSProtocol" value="<?php echo $strProtocol; ?>"> <input TYPE="hidden" name="TxType" value="<?php echo $strTransactionType; ?>"> <input TYPE="hidden" name="Vendor" value="<?php echo $strVSPVendorName; ?>"> <input TYPE="hidden" name="Crypt" value="<?php echo $crypt; ?>"> <input name="sbbutton" type="submit" value="Checkout" class="wpcf7-submit"> </form> <?php return ob_get_clean(); } when using "TEST" im getting an error: Status Detail: 5005 : The Vendor configuration is missing or invalid when using "TTEST" im getting an error: VPSProtocol=2.23 Status=INVALID StatusDetail=The VendorTxCode you supplied is an invalid length. VendorTxCodes should be between 1 to 40 characters long I cannot seem to figure this out at all. If anyone has any ideas it would be greatfuly appreciated. EDIT: $stuff echos out: VendorTxCode=fdsdgfd&Amount=45.60&Currency=GBP&Description=description...&SuccessURL=http://localhost/ecom_framework/&FailureURL=http://localhost/ecom_framework/&[email protected]&[email protected]&CustomerName=Luke Snowden&DeliveryAddress=mansfield, nottinghamshire, mansfield, nottinghamshire, United Kingdom&DeliveryPostCode=ng19 8pw&BillingAddress=mansfield, nottinghamshire, mansfield, nottinghamshire, United Kingdom&BillingPostCode=ng19 8pw&ContactNumber=0165656567&ApplyAVSCV2=1&Apply3DSecure=1&Basket=3:Blue Hat - black :2:£2£:0.00:£4.00:Blue Hat - brown :3:£3£:0.00:£9.00:Blue Hat - grey :4:£4£:0.00:£16.00:Delivery:1:£4.99EMailMessage=For an update on the status of your order please email us at [email protected]

    Read the article

  • Create Downloadable CSV File from PHP Script

    - by Aphex22
    How would I create a formatted version of the following PHP script as a downloadable CSV file from the code below (1.0) At the moment the fputcsv function is currently dumping the unparsed PHP/HTML code into a CSV file. This is incorrect. The downloaded CSV file should contain the columns and rows generated from the code at (1.0) as shown in the image link below. I've tried using the following code at the top of the PHP file: // output headers so that the file is downloaded rather than displayed header('Content-Type: text/csv; charset=utf-8'); header('Content-Disposition: attachment; filename=amazon.csv'); // create a file pointer connected to the output stream $output = fopen('php://output', 'w'); $mysql_hostname = ""; $mysql_user = ""; $mysql_password = ""; $mysql_database = ""; $bd = mysql_connect($mysql_hostname, $mysql_user, $mysql_password) or die("Could not connect database"); mysql_select_db($mysql_database, $bd) or die("Could not select database"); $sql = "select * from product WHERE on_amazon = 'on' AND active = 'on'"; $result = mysql_query($sql) or die ( mysql_error() ); // loop over the rows, outputting them while ($sql_result = mysql_fetch_assoc($sql)) fputcsv($output, $sql_result); 1.0 The start of the code outputs the column headings for the CSV file: // set headers echo " item_sku, external_product_id, external_product_id_type, item_name, brand_name, manufacturer, product_description, feed_product_type, update_delete, part_number, model, standard_price, list_price, currency, quantity, product_tax_code, product_site_launch_date, merchant_release_date, restock_date ... <br>"; And then follows PHP script for the column values // load all stock while ($line = mysql_fetch_assoc($result) ) { ?> <?php $size_suffix = array ("",'_chain','_con_b','_con_c'); $arrayLength = count ($size_suffix); for($y=0;$y<$arrayLength;$y++) { //Possible size array to loop through when checking quantity $con_size = array (36,365,37,375,38,385,39,395,40,405,41,415,42,425,43,435,44,445,45,455,46,465,47,475,48,485); $arrlength=count($con_size); for($x=0;$x<$arrlength;$x++) { // check if size is available if($line['quantity_c_size_'.$con_size[$x].$size_suffix[$y]] > 0 ) { ?> <!-- item sku --> <?=$line['product_id']?>, <!-- external product id --> <?=$line['code_size_'.$con_size[$x].'']?>, <? // external product id type $barcode = $line['code_size_'.$con_size[$x]]; $trim_barcode = trim($barcode); $count = strlen($trim_barcode); if ($count == 12) { echo "UPC"; } if ($count == 13) { echo "EAN"; } elseif ($count < 12) { echo " "; } ?>, <!-- item name --> <?=$line['title']?>, <? // brand_name $brand = $line['jys_brand']; echo ucfirst($brand); ?>, <? // manufacturer $brand = $line['jys_brand']; echo ucfirst($brand); ?>, <!-- product description --> <?=preg_replace('/[^\da-z]/i', ' ', $line['amazon_desc']) ?>, <!-- feed product type --> Shoes, , , , <!-- standard price --> <?=$line['price']?>, , <!-- currency --> GBP, <!-- quantity --> <?=$line['quantity_size_'.$con_size[$x].$size_suffix[$y]]?>, , <!-- product site launch date --> <?=$line['added_y']?>-<?=$line['added_m']?>-<?=$line['added_d']?>, <!-- merchat release date --> <?=$line['added_y']?>-<?=$line['added_m']?>-<?=$line['added_d']?>, , , , , <!-- item package quantity --> 1, , , , , <!-- fulfillment latency --> 2, <!-- max aggregate ship quantity --> 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , <!-- main image url, url1, url2, url3 --> http://www.getashoe.co.uk/full/<?=$line['product_id']?>_1.jpg, http://www.getashoe.co.uk/full/<?=$line['product_id']?>_2.jpg, http://www.getashoe.co.uk/full/<?=$line['product_id']?>_3.jpg, http://www.getashoe.co.uk/full/<?=$line['product_id']?>_4.jpg, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , <!-- heel height --> <?=$line['heel']?>, , , , , , , , , , , <!-- colour name --> <?=$line['colour']?>, <!-- colour map --> <? $colour = preg_replace('/[()]/i', ' ', $line['colour']); if (preg_match( '/[\/].*/i', $colour)) { echo 'Multicolour'; } if (preg_match( '/off.*/i', $colour)) { echo 'Off-White'; } elseif( preg_match( '/white.*/i', $colour)) { echo 'White'; } elseif( preg_match( '/moro.*/i', $colour)) { echo 'Brown'; } elseif( preg_match( '/morado.*/i', $colour)) { echo 'Purple'; } elseif( preg_match( '/cream.*/i', $colour)) { echo 'Off-White'; } elseif( preg_match( '/pewter.*/i', $colour)) { echo 'Silver'; } elseif( preg_match( '/yellow.*/i', $colour)) { echo 'Yellow'; } elseif( preg_match( '/camel.*/i', $colour)) { echo 'Beige'; } elseif( preg_match( '/navy.*/i', $colour)) { echo 'Blue'; } elseif( preg_match( '/tan.*/i', $colour)) { echo 'Brown'; } elseif( preg_match( '/rainbow.*/i', $colour)) { echo 'Multicolour'; } elseif( preg_match( '/orange.*/i', $colour)) { echo 'Orange'; } elseif( preg_match( '/leopard.*/i', $colour)) { echo 'Multicolour'; } elseif( preg_match( '/red.*/i', $colour)) { echo 'Red'; } elseif( preg_match( '/pink.*/i', $colour)) { echo 'Pink'; } elseif( preg_match( '/purple.*/i', $colour)) { echo 'Purple'; } elseif( preg_match( '/blue.*/i', $colour)) { echo 'Blue'; } elseif( preg_match( '/green.*/i', $colour)) { echo 'Green'; } elseif( preg_match( '/brown.*/i', $colour)) { echo 'Brown'; } elseif( preg_match( '/grey.*/i', $colour)) { echo 'Grey'; } elseif( preg_match( '/black.*/i', $colour)) { echo 'Black'; } elseif( preg_match( '/gold.*/i', $colour)) { echo 'Gold'; } elseif( preg_match( '/silver.*/i', $colour)) { echo 'Silver'; } elseif( preg_match( '/multi.*/i', $colour)) { echo 'Multicolour'; } elseif( preg_match( '/beige.*/i', $colour)) { echo 'Beige'; } elseif( preg_match( '/nude.*/i', $colour)) { echo 'Beige'; } ?>, <!-- size name --> <? echo $con_size[$x];?>, <!-- size map --> <? if ($con_size[$x] == 36) { echo "3 UK"; } elseif ($con_size[$x] == 37 ) { echo "4 UK"; } elseif ($con_size[$x] == 38) { echo "5 UK"; } elseif ($con_size[$x] == 39 ) { echo "6 UK"; } elseif ($con_size[$x] == 40 ) { echo "7 UK"; } elseif ($con_size[$x] == 41) { echo "8 UK"; } elseif ($con_size[$x] == 42) { echo "9 UK"; } elseif ($con_size[$x] == 43) { echo "10 UK"; } elseif ($con_size[$x] == 44 ) { echo "11 UK"; } elseif ($con_size[$x] == 45 ) { echo "12 UK"; } elseif ($con_size[$x] == 46 ) { echo "13 UK"; } elseif ($con_size[$x] == 47 ) { echo "14 UK"; } elseif ($con_size[$x] == 48 ) { echo "15 UK"; } elseif ($con_size[$x] == 365) { echo "3.5 UK"; } elseif ($con_size[$x] == 375 ) { echo "4.5 UK"; } elseif ($con_size[$x] == 385) { echo "5.5 UK"; } elseif ($con_size[$x] == 395 ) { echo "6.5 UK"; } elseif ($con_size[$x] == 405 ) { echo "7.5 UK"; } elseif ($con_size[$x] == 415) { echo "8.5 UK"; } elseif ($con_size[$x] == 425) { echo "9.5 UK"; } elseif ($con_size[$x] == 435) { echo "10.5 UK"; } elseif ($con_size[$x] == 445 ) { echo "11.5 UK"; } elseif ($con_size[$x] == 455 ) { echo "12.5 UK"; } elseif ($con_size[$x] == 465 ) { echo "13.5 UK"; } elseif ($con_size[$x] == 475 ) { echo "14.5 UK"; } elseif ($con_size[$x] == 485 ) { echo "15.5 UK"; } ?>, <br> <? // finish checking if size is available } } } ?> I've included an image of how the CSV file should appear. https://i.imgur.com/ZU3IFer.png Any help would be great.

    Read the article

  • Detect if 2 HTML fragments have identical hierarchical structure

    - by sergzach
    An example of fragments that have identical hierarchical structure: (1) <div> <span>It's a message</span> </div> (2) <div> <span class='bold'>This is a new text</span> </div> An example of fragments that have different structure: (1) <div> <span><b>It's a message</b></span> </div> (2) <div> <span>This is a new text</span> </div> So, fragments with a similar structure correspond to one hierarchical tree (the same tag names, the same hierarchical structure). How can I detect if 2 elements (html fragments) have the same structure simply with lxml? I have a function that does not work properly for some more difficult case (than the example): def _is_equal( el1, el2 ): # input: 2 elements with possible equal structure and tag names # e.g. root = lxml.html.fromstring( buf ) # el1 = root[ 0 ] # el2 = root[ 1 ] # move from top to bottom, compare elements result = False if el1.tag == el2.tag: # has no children if len( el1 ) == len( el2 ): if len( el1 ) == 0: return True else: # iterate one of them, for example el1 i = 0 for child1 in el1: child2 = el2[ i ] is_equal2 = _is_equal( child1, child2 ) if not is_equal2: return False return True else: return False else: return False The code fails to detect that 2 divs with class='tovar2' have an identical structure: <body> <div class="tovar2"> <h2 class="new"> <a href="http://modnyedeti-krsk.ru/magazin/product/333193003"> ?????? ?/? </a> </h2> <ul class="art"> <li> ???????: <span>1759</span> </li> </ul> <div> <div class="wrap" style="width:180px;"> <div class="new"> <img src="shop_files/new-t.png" alt=""> </div> <a class="highslide" href="http://modnyedeti-krsk.ru/d/459730/d/820.jpg" onclick="return hs.expand(this)"> <img src="shop_files/fr_5.gif" style="background:url(/d/459730/d/548470803_5.jpg) 50% 50% no-repeat scroll;" alt="?????? ?/?" height="160" width="180"> </a> </div> </div> <form action="" onsubmit="return addProductForm(17094601,333193003,3150.00,this,false);"> <ul class="bott "> <li class="price">????:<br> <span> <b> 3 150 </b> ???. </span> </li> <li class="amount">???-??:<br><input class="number" onclick="this.select()" value="1" name="product_amount" type="text"> </li> <li class="buy"><input value="" type="submit"> </li> </ul> </form> </div> <div class="tovar2"> <h2 class="new"> <a href="http://modnyedeti-krsk.ru/magazin/product/333124803">?????? ?/?</a> </h2> <ul class="art"> <li> ???????: <span>1759</span> </li> </ul> <div> <div class="wrap" style="width:180px;"> <div class="new"> <img src="shop_files/new-t.png" alt=""> </div> <a class="highslide" href="http://modnyedeti-krsk.ru/d/459730/d/820.jpg" onclick="return hs.expand(this)"> <img src="shop_files/fr_5.gif" style="background:url(/d/459730/d/548470803_5.jpg) 50% 50% no-repeat scroll;" alt="?????? ?/?" height="160" width="180"> </a> </div> </div> <form action="" onsubmit="return addProductForm(17094601,333124803,3150.00,this,false);"> <ul class="bott "> <li class="price">????:<br> <span> <b>3 150</b> ???. </span> </li> <li class="amount">???-??:<br><input class="number" onclick="this.select()" value="1" name="product_amount" type="text"> </li> <li class="buy"> <input value="" type="submit"> </li> </ul> </form> </div> </body>

    Read the article

  • Parsing HTML using HTTP Agility Pack

    - by Pajci
    Here is one table out of 5: <h3>marec - maj 2009</h3> <div class="graf_table"> <table summary="layout table"> <tr> <th>DATUM</th> <td class="datum">10.03.2009</td> <td class="datum">24.03.2009</td> <td class="datum">07.04.2009</td> <td class="datum">21.04.2009</td> <td class="datum">05.05.2009</td> <td class="datum">06.05.2009</td> </tr> <tr> <th>Maloprodajna cena [EUR/L]</th> <td>0,96000</td> <td>0,97000</td> <td>0,99600</td> <td>1,00800</td> <td>1,00800</td> <td>1,01000</td> </tr> <tr> <th>Maloprodajna cena [SIT/L]</th> <td>230,054</td> <td>232,451</td> <td>238,681</td> <td>241,557</td> <td>241,557</td> <td>242,036</td> </tr> <tr> <th>Prodajna cena brez dajatev</th> <td>0,33795</td> <td>0,34628</td> <td>0,36795</td> <td>0,37795</td> <td>0,37795</td> <td>0,37962</td> </tr> <tr> <th>Trošarina</th> <td>0,46205</td> <td>0,46205</td> <td>0,46205</td> <td>0,46205</td> <td>0,46205</td> <td>0,46205</td> </tr> <tr> <th>DDV</th> <td>0,16000</td> <td>0,16167</td> <td>0,16600</td> <td>0,16800</td> <td>0,16800</td> <td>0,16833</td> </tr> </table> </div> I have to extract out values, where table header is DATUM and Maloprodajna cena [EUR/L]. I am using Agility HTML pack. this.htmlDoc = new HtmlAgilityPack.HtmlDocument(); this.htmlDoc.OptionCheckSyntax = true; this.htmlDoc.OptionFixNestedTags = true; this.htmlDoc.OptionAutoCloseOnEnd = true; this.htmlDoc.OptionOutputAsXml = true; // is this necessary ?? this.htmlDoc.OptionDefaultStreamEncoding = System.Text.Encoding.Default; I had a lot of trouble with getting those values out. I started with: var query = from html in doc.DocumentNode.SelectNodes("//div[@class='graf_table']").Cast<HtmlNode>() from table in html.SelectNodes("//table").Cast<HtmlNode>() from row in table.SelectNodes("tr").Cast<HtmlNode>() from cell in row.SelectNodes("th|td").Cast<HtmlNode>() select new { Table = table.Id, CellText = cell.InnerHtml }; but could not figure out a way to select only values where table header is DATUM and Maloprodajna cena[EUR/L]. Is it possible to do that with where clause? Then I ended with those two queries: var date = (from d in htmlDoc.DocumentNode.SelectNodes("//div[@class='graf_table']//table//tr[1]/td") select DateTime.Parse(d.InnerText)).ToArray(); var price = (from p in htmlDoc.DocumentNode.SelectNodes("//div[@class='graf_table']//table//tr[2]/td") select double.Parse(p.InnerText)).ToArray(); Is it possible to combine those two queries? And how would I convert that to lambda expression? I just started to learn those things and I would like to know how it is done so that in the future I would not have those question. O, one more question ... does anybody know any graph control, cause I have to show those values in graph. I started with Microsoft Chart Controls, but I am having trouble with setting it. So if anyone has any experience with it I would like to know how to set it, so that x axle will show all values not every second ... example: if I have: 10.03.2009, 24.03.2009, 07.04.2009, 21.04.2009, 05.05.2009, 06.05.2009 it show only: 10.03.2009, 07.04.2009, 05.05.2009, ect. I bind data to graph like that: chart1.Series["Series1"].Points.DataBindXY(date, price); I lot of questions for my fist post ... hehe, hope that I was not indistinct or something. Thank's for any reply!

    Read the article

  • Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

    - by Ricardo Ferreira
    In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

    Read the article

  • Building an ASP.Net 4.5 Web forms application - part 4

    - by nikolaosk
    ?his is the fourth post in a series of posts on how to design and implement an ASP.Net 4.5 Web Forms store that sells posters on line.There are 3 more posts in this series of posts.Please make sure you read them first.You can find the first post here. You can find the second post here. You can find the third post here.  In this new post we will build on the previous posts and we will demonstrate how to display the posters per category.We will add a ListView control on the PosterList.aspx and will bind data from the database. We will use the various templates.Then we will write code in the PosterList.aspx.cs to fetch data from the database.1) Launch Visual Studio and open your solution where your project lives2) Open the PosterList.aspx page. We will add some markup in this page. Have a look at the code below  <section class="posters-featured">                    <ul>                         <asp:ListView ID="posterList" runat="server"                            DataKeyNames="PosterID"                            GroupItemCount="3" ItemType="PostersOnLine.DAL.Poster" SelectMethod="GetPosters">                            <EmptyDataTemplate>                                      <table id="Table1" runat="server">                                            <tr>                                                  <td>We have no data.</td>                                            </tr>                                     </table>                              </EmptyDataTemplate>                              <EmptyItemTemplate>                                     <td id="Td1" runat="server" />                              </EmptyItemTemplate>                              <GroupTemplate>                                    <tr ID="itemPlaceholderContainer" runat="server">                                          <td ID="itemPlaceholder" runat="server"></td>                                    </tr>                              </GroupTemplate>                              <ItemTemplate>                                    <td id="Td2" runat="server">                                          <table>                                                <tr>                                                      <td>&nbsp;</td>                                                      <td>                                                <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>">                                                    <img src="<%#:Item.PosterImgpath%>"                                                        width="100" height="75" border="1"/></a>                                             </td>                                            <td>                                                <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>">                                                    <span class="PosterName">                                                        <%#:Item.PosterName%>                                                    </span>                                                </a>                                                            <br />                                                <span class="PosterPrice">                                                               <b>Price: </b><%#:String.Format("{0:c}", Item.PosterPrice)%>                                                </span>                                                <br />                                                        </td>                                                </tr>                                          </table>                                    </td>                              </ItemTemplate>                              <LayoutTemplate>                                    <table id="Table2" runat="server">                                          <tr id="Tr1" runat="server">                                                <td id="Td3" runat="server">                                                      <table ID="groupPlaceholderContainer" runat="server">                                                            <tr ID="groupPlaceholder" runat="server"></tr>                                                      </table>                                                </td>                                          </tr>                                          <tr id="Tr2" runat="server"><td id="Td4" runat="server"></td></tr>                                    </table>                              </LayoutTemplate>                        </asp:ListView>                    </ul>               </section>  3) We have a ListView control on the page called PosterList. I set the ItemType property to the Poster class and then the SelectMethod to the GetPosters method.  I will create this method later on.   (ItemType="PostersOnLine.DAL.Poster" SelectMethod="GetPosters")Then in the code below  I have the data-binding expression Item  available and the control becomes strongly typed.So when the user clicks on the link of the poster's category the relevant information will be displayed (photo,name and price)                                            <td>                                                <a href="PosterDetails.aspx?posterID=<%#:Item.PosterID%>">                                                    <img src="<%#:Item.PosterImgpath%>"                                                        width="100" height="75" border="1"/></a>                                             </td>4)  Now we need to write the simple method to populate the ListView control.It is called GetPosters method.The code follows   public IQueryable<Poster> GetPosters([QueryString("id")] int? PosterCatID)        {            PosterContext ctx = new PosterContext();            IQueryable<Poster> query = ctx.Posters;            if (PosterCatID.HasValue && PosterCatID > 0)            {                query = query.Where(p=>p.PosterCategoryID==PosterCatID);            }            return query;                    } This is a very simple method that returns information about posters related to the PosterCatID passed to it.I bind the value from the query string to the PosterCatID parameter at run time.This is all possible due to the QueryStringAttribute class that lives inside the System.Web.ModelBinding and gets the value of the query string variable id.5) I run my application and then click on the "Midfilders" link. Have a look at the picture below to see the results.  In the Site.css file I added some new CSS rules to make everything more presentable. .posters-featured {    width:840px;    background-color:#efefef;}.posters-featured   a:link, a:visited,    a:active, a:hover {        color: #000033;    }.posters-featured    a:hover {        background-color: #85c465;    }  6) I run the application again and this time I do not choose any category, I simply navigate to the PosterList.aspx page. I see all the posters since no query string was passed as a parameter.Have a look at the picture below   ?ake sure you place breakpoints in the code so you can see what is really going on.In the next post I will show you how to display poster details.Hope it helps!!!

    Read the article

  • Where is my object allocation and memory leak in this iPhone/objective C code?

    - by Spottswoode
    Hello, I'm still a rookie when it comes to this programming gig and was wondering if someone could help me smooth out this code. Functionally, the code works great and does what I need it to do. But when I run the performance tool the allocation graph peaks, the CPU load is high, there's a leak(s), and I've also confirmed when running on my iPhone it seems noticeably slower then the rest of the components in my app. I'd appreciate any advice/tips/help anyone could give me. :) Thanks in advance! .h file // // Time_CalculatorViewController.h // Time Calculator // // Created by Adam Soloway on 2/19/10. // Copyright Legacy Pilots 2010. All rights reserved. // #import <UIKit/UIKit.h> @interface Time_CalculatorViewController : UIViewController { //BOOL moveViewUp; //CGFloat scrollAmount; IBOutlet UILabel *hoursLabel; IBOutlet UILabel *minutesLabel; IBOutlet UILabel *hoursDecimalLabel; IBOutlet UILabel *minutesDecimalLabel; IBOutlet UILabel *errorLabel; IBOutlet UITextField *minTextField1; IBOutlet UITextField *minTextField2; IBOutlet UITextField *minTextField3; IBOutlet UITextField *minTextField4; IBOutlet UITextField *minTextField5; IBOutlet UITextField *minTextField6; IBOutlet UITextField *minTextField7; IBOutlet UITextField *minTextField8; IBOutlet UITextField *minTextField9; IBOutlet UITextField *minTextField10; IBOutlet UITextField *hourTextField1; IBOutlet UITextField *hourTextField2; IBOutlet UITextField *hourTextField3; IBOutlet UITextField *hourTextField4; IBOutlet UITextField *hourTextField5; IBOutlet UITextField *hourTextField6; IBOutlet UITextField *hourTextField7; IBOutlet UITextField *hourTextField8; IBOutlet UITextField *hourTextField9; IBOutlet UITextField *hourTextField10; IBOutlet UIButton *resetAll; NSString *minutesString1; NSString *minutesString2; NSString *minutesString3; NSString *minutesString4; NSString *minutesString5; NSString *minutesString6; NSString *minutesString7; NSString *minutesString8; NSString *minutesString9; NSString *minutesString10; NSString *hoursString1; NSString *hoursString2; NSString *hoursString3; NSString *hoursString4; NSString *hoursString5; NSString *hoursString6; NSString *hoursString7; NSString *hoursString8; NSString *hoursString9; NSString *hoursString10; int hourDecimalNumber; int totalTime; int leftOverMinutes; int minuteNumber1; int minuteNumber2; int minuteNumber3; int minuteNumber4; int minuteNumber5; int minuteNumber6; int minuteNumber7; int minuteNumber8; int minuteNumber9; int minuteNumber10; int hourNumber1; int hourNumber2; int hourNumber3; int hourNumber4; int hourNumber5; int hourNumber6; int hourNumber7; int hourNumber8; int hourNumber9; int hourNumber10; } //- (void)scrollTheView:(BOOL)movedUp; - (void)calculateTime; - (IBAction)resetAllValues; @end .m file // // Time_CalculatorViewController.m // Time Calculator // // Created by Adam Soloway on 2/19/10. // Copyright Legacy Pilots 2010. All rights reserved. // #import "Time_CalculatorViewController.h" @implementation Time_CalculatorViewController - (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event { if( minTextField1.editing || minTextField2.editing || minTextField3.editing || minTextField4.editing || minTextField5.editing || minTextField6.editing || minTextField7.editing || minTextField8.editing || minTextField9.editing || minTextField10.editing || hourTextField1.editing || hourTextField2.editing || hourTextField3.editing || hourTextField4.editing || hourTextField5.editing || hourTextField6.editing || hourTextField7.editing || hourTextField8.editing || hourTextField9.editing || hourTextField10.editing) { [minTextField1 resignFirstResponder]; [minTextField2 resignFirstResponder]; [minTextField3 resignFirstResponder]; [minTextField4 resignFirstResponder]; [minTextField5 resignFirstResponder]; [minTextField6 resignFirstResponder]; [minTextField7 resignFirstResponder]; [minTextField8 resignFirstResponder]; [minTextField9 resignFirstResponder]; [minTextField10 resignFirstResponder]; [hourTextField1 resignFirstResponder]; [hourTextField2 resignFirstResponder]; [hourTextField3 resignFirstResponder]; [hourTextField4 resignFirstResponder]; [hourTextField5 resignFirstResponder]; [hourTextField6 resignFirstResponder]; [hourTextField7 resignFirstResponder]; [hourTextField8 resignFirstResponder]; [hourTextField9 resignFirstResponder]; [hourTextField10 resignFirstResponder]; [self calculateTime]; //if (moveViewUp) [self scrollTheView:NO]; } [super touchesBegan:touches withEvent:event]; } /* // The designated initializer. Override to perform setup that is required before the view is loaded. - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Custom initialization } return self; } */ /* // Implement loadView to create a view hierarchy programmatically, without using a nib. - (void)loadView { } */ // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; } /* // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return (interfaceOrientation == UIInterfaceOrientationPortrait); } */ - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)viewDidUnload { // Release any retained subviews of the main view. // e.g. self.myOutlet = nil; } - (void)dealloc { [minutesString1 release]; [minutesString2 release]; [minutesString3 release]; [minutesString4 release]; [minutesString5 release]; [minutesString6 release]; [minutesString7 release]; [minutesString8 release]; [minutesString9 release]; [minutesString10 release]; [hoursString1 release]; [hoursString2 release]; [hoursString3 release]; [hoursString4 release]; [hoursString5 release]; [hoursString6 release]; [hoursString7 release]; [hoursString8 release]; [hoursString9 release]; [hoursString10 release]; [super dealloc]; } -(BOOL)textFieldShouldReturn:(UITextField *)theTextField { //[minTextField10 resignFirstResponder]; //if (moveViewUp) [self scrollTheView:NO]; [self calculateTime]; return YES; } - (IBAction)resetAllValues { minTextField1.text = 0; minTextField2.text = 0; minTextField3.text = 0; minTextField4.text = 0; minTextField5.text = 0; minTextField6.text = 0; minTextField7.text = 0; minTextField8.text = 0; minTextField9.text = 0; minTextField10.text = 0; hourTextField1.text = 0; hourTextField2.text = 0; hourTextField3.text = 0; hourTextField4.text = 0; hourTextField5.text = 0; hourTextField6.text = 0; hourTextField7.text = 0; hourTextField8.text = 0; hourTextField9.text = 0; hourTextField10.text = 0; totalTime = 0; leftOverMinutes = 0; hoursLabel.text = [NSString stringWithFormat:@"0"]; hourDecimalNumber = 0; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; minutesDecimalLabel.text = [NSString stringWithFormat:@"0"]; self.calculateTime; } - (void)calculateTime { minutesString1 = minTextField1.text; minutesString2 = minTextField2.text; minutesString3 = minTextField3.text; minutesString4 = minTextField4.text; minutesString5 = minTextField5.text; minutesString6 = minTextField6.text; minutesString7 = minTextField7.text; minutesString8 = minTextField8.text; minutesString9 = minTextField9.text; minutesString10 = minTextField10.text; hoursString1 = hourTextField1.text; hoursString2 = hourTextField2.text; hoursString3 = hourTextField3.text; hoursString4 = hourTextField4.text; hoursString5 = hourTextField5.text; hoursString6 = hourTextField6.text; hoursString7 = hourTextField7.text; hoursString8 = hourTextField8.text; hoursString9 = hourTextField9.text; hoursString10 = hourTextField10.text; minuteNumber1 = [minutesString1 intValue]; minuteNumber2 = [minutesString2 intValue]; minuteNumber3 = [minutesString3 intValue]; minuteNumber4 = [minutesString4 intValue]; minuteNumber5 = [minutesString5 intValue]; minuteNumber6 = [minutesString6 intValue]; minuteNumber7 = [minutesString7 intValue]; minuteNumber8 = [minutesString8 intValue]; minuteNumber9 = [minutesString9 intValue]; minuteNumber10 = [minutesString10 intValue]; hourNumber1 = ([hoursString1 intValue] * 60); hourNumber2 = ([hoursString2 intValue] * 60); hourNumber3 = ([hoursString3 intValue] * 60); hourNumber4 = ([hoursString4 intValue] * 60); hourNumber5 = ([hoursString5 intValue] * 60); hourNumber6 = ([hoursString6 intValue] * 60); hourNumber7 = ([hoursString7 intValue] * 60); hourNumber8 = ([hoursString8 intValue] * 60); hourNumber9 = ([hoursString9 intValue] * 60); hourNumber10 = ([hoursString10 intValue] * 60); totalTime = (hourNumber1 + hourNumber2 +hourNumber3 +hourNumber4 +hourNumber5 +hourNumber6 +hourNumber7 +hourNumber8 +hourNumber9 +hourNumber10 + minuteNumber1 + minuteNumber2 + minuteNumber3 + minuteNumber4 + minuteNumber5 +minuteNumber6 + minuteNumber7 + minuteNumber8 + minuteNumber9 + minuteNumber10); if (totalTime <= 59) { leftOverMinutes = totalTime; hoursLabel.text = [NSString stringWithFormat:@"0"]; hourDecimalNumber = 0; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >59 && totalTime <= 119){ leftOverMinutes = totalTime - 60; hoursLabel.text = [NSString stringWithFormat:@"1"]; hourDecimalNumber = 1; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >119 && totalTime <= 179){ leftOverMinutes = totalTime - 120; hoursLabel.text = [NSString stringWithFormat:@"2"]; hourDecimalNumber = 2; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >179 && totalTime <= 239){ leftOverMinutes = totalTime - 180; hoursLabel.text = [NSString stringWithFormat:@"3"]; hourDecimalNumber = 3; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >239 && totalTime <= 299){ leftOverMinutes = totalTime - 240; hoursLabel.text = [NSString stringWithFormat:@"4"]; hourDecimalNumber = 4; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >299 && totalTime <= 359){ leftOverMinutes = totalTime - 300; hoursLabel.text = [NSString stringWithFormat:@"5"]; hourDecimalNumber = 5; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >359 && totalTime <= 419){ leftOverMinutes = totalTime - 360; hoursLabel.text = [NSString stringWithFormat:@"6"]; hourDecimalNumber = 6; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >419 && totalTime <= 479){ leftOverMinutes = totalTime - 420; hoursLabel.text = [NSString stringWithFormat:@"7"]; hourDecimalNumber = 7; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >479 && totalTime <= 539){ leftOverMinutes = totalTime - 480; hoursLabel.text = [NSString stringWithFormat:@"8"]; hourDecimalNumber = 8; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >539 && totalTime <= 599){ leftOverMinutes = totalTime - 540; hoursLabel.text = [NSString stringWithFormat:@"9"]; hourDecimalNumber = 9; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >599 && totalTime <= 659){ leftOverMinutes = totalTime - 600; hoursLabel.text = [NSString stringWithFormat:@"10"]; hourDecimalNumber = 10; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >659 && totalTime <= 719){ leftOverMinutes = totalTime - 660; hoursLabel.text = [NSString stringWithFormat:@"11"]; hourDecimalNumber = 11; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >719 && totalTime <= 779){ leftOverMinutes = totalTime - 720; hoursLabel.text = [NSString stringWithFormat:@"12"]; hourDecimalNumber = 12; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >779 && totalTime <= 839){ leftOverMinutes = totalTime - 780; hoursLabel.text = [NSString stringWithFormat:@"13"]; hourDecimalNumber = 13; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >839 && totalTime <= 899){ leftOverMinutes = totalTime - 840; hoursLabel.text = [NSString stringWithFormat:@"14"]; hourDecimalNumber = 14; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >899 && totalTime <= 959){ leftOverMinutes = totalTime - 900; hoursLabel.text = [NSString stringWithFormat:@"15"]; hourDecimalNumber = 15; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >959 && totalTime <= 1019){ leftOverMinutes = totalTime - 960; hoursLabel.text = [NSString stringWithFormat:@"16"]; hourDecimalNumber = 16; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1019 && totalTime <= 1079){ leftOverMinutes = totalTime - 1020; hoursLabel.text = [NSString stringWithFormat:@"17"]; hourDecimalNumber = 17; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1079 && totalTime <= 1139){ leftOverMinutes = totalTime - 1080; hoursLabel.text = [NSString stringWithFormat:@"18"]; hourDecimalNumber = 18; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1139 && totalTime <= 1199){ leftOverMinutes = totalTime - 1140; hoursLabel.text = [NSString stringWithFormat:@"19"]; hourDecimalNumber = 19; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1199 && totalTime <= 1259){ leftOverMinutes = totalTime - 1200; hoursLabel.text = [NSString stringWithFormat:@"20"]; hourDecimalNumber = 20; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1259 && totalTime <= 1319){ leftOverMinutes = totalTime - 1260; hoursLabel.text = [NSString stringWithFormat:@"21"]; hourDecimalNumber = 21; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1319 && totalTime <= 1379){ leftOverMinutes = totalTime - 1320; hoursLabel.text = [NSString stringWithFormat:@"22"]; hourDecimalNumber = 22; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1379 && totalTime <= 1439){ leftOverMinutes = totalTime - 1380; hoursLabel.text = [NSString stringWithFormat:@"23"]; hourDecimalNumber = 23; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1439 && totalTime <= 1499){ leftOverMinutes = totalTime - 1440; hoursLabel.text = [NSString stringWithFormat:@"24"]; hourDecimalNumber = 24; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1499 && totalTime <= 1559){ leftOverMinutes = totalTime - 1500; hoursLabel.text = [NSString stringWithFormat:@"25"]; hourDecimalNumber = 25; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1559 && totalTime <= 1619){ leftOverMinutes = totalTime - 1560; hoursLabel.text = [NSString stringWithFormat:@"26"]; hourDecimalNumber = 26; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1619 && totalTime <= 1679){ leftOverMinutes = totalTime - 1620; hoursLabel.text = [NSString stringWithFormat:@"27"]; hourDecimalNumber = 27; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1679 && totalTime <= 1739){ leftOverMinutes = totalTime - 1680; hoursLabel.text = [NSString stringWithFormat:@"28"]; hourDecimalNumber = 28; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1739 && totalTime <= 1799){ leftOverMinutes = totalTime - 1740; hoursLabel.text = [NSString stringWithFormat:@"29"]; hourDecimalNumber = 29; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1799 && totalTime <= 1859){ leftOverMinutes = totalTime - 1800; hoursLabel.text = [NSString stringWithFormat:@"30"]; hourDecimalNumber = 30; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; errorLabel.hidden = TRUE; } else if (totalTime >1859){ hoursLabel.text = [NSString stringWithFormat:@"Error"]; hoursDecimalLabel.text = [NSString stringWithFormat:@"Error"]; errorLabel.hidden = FALSE; } //Minutes Label if (leftOverMinutes < 10) { minutesLabel.text = [NSString stringWithFormat:@"0%d", leftOverMinutes]; } else minutesLabel.text = [NSString stringWithFormat:@"%d", leftOverMinutes]; //Minutes Decimal Label if (leftOverMinutes >=0 && leftOverMinutes <=2) { minutesDecimalLabel.text = [NSString stringWithFormat:@"0"]; } else if (leftOverMinutes >=3 && leftOverMinutes <=8){ minutesDecimalLabel.text = [NSString stringWithFormat:@"1"]; } else if (leftOverMinutes >=9 && leftOverMinutes <=14){ minutesDecimalLabel.text = [NSString stringWithFormat:@"2"]; } else if (leftOverMinutes >=15 && leftOverMinutes <=20){ minutesDecimalLabel.text = [NSString stringWithFormat:@"3"]; } else if (leftOverMinutes >=21 && leftOverMinutes <=26){ minutesDecimalLabel.text = [NSString stringWithFormat:@"4"]; } else if (leftOverMinutes >=27 && leftOverMinutes <=32){ minutesDecimalLabel.text = [NSString stringWithFormat:@"5"]; } else if (leftOverMinutes >=33 && leftOverMinutes <=38){ minutesDecimalLabel.text = [NSString stringWithFormat:@"6"]; } else if (leftOverMinutes >=39 && leftOverMinutes <=44){ minutesDecimalLabel.text = [NSString stringWithFormat:@"7"]; } else if (leftOverMinutes >=45 && leftOverMinutes <=50){ minutesDecimalLabel.text = [NSString stringWithFormat:@"8"]; } else if (leftOverMinutes >=51 && leftOverMinutes <=56){ minutesDecimalLabel.text = [NSString stringWithFormat:@"9"]; } else if (leftOverMinutes >=57 && leftOverMinutes <=60){ minutesDecimalLabel.text = [NSString stringWithFormat:@"0"]; hourDecimalNumber = hourDecimalNumber + 1; hoursDecimalLabel.text = [NSString stringWithFormat:@"%i", hourDecimalNumber]; } } @end

    Read the article

  • Featureful commercial text editors?

    - by wrp
    I'm willing to buy tools if they add genuine value over a FOSS equivalent. One thing I wouldn't mind having is an editor with the power of Emacs, but made more user-friendly. There seem to be several commercial editors out there, but I can't find much discussion of them online. Maybe it's because the kind of people who use commercial software don't have time to do much blogging. ;-) If you have used any, what was your evaluation? I'd especially like to hear how you would compare them to Emacs. I'm thinking of editors like VEDIT, Boxer, Crisp, UltraEdit, SlickEdit, etc. To get things started, I tried EditPad Pro because I needed something on a Win98SE box. I was attracted by its powerful support for regexps, but I didn't use it for long. One annoyance was that find-in-files was only available in a separate product you had to buy. The main problem, though, was stability. It sometimes hung and I lost a few files because it corrupted them while editing. After a couple weeks, I found that I was avoiding using it, so I just uninstalled. Edit: Ah...I need to remove some ambiguity. With reference to Emacs, "power" often means its potential for customization. This malleability comes from having an architecture in which most of the functionality is written in a scripting language that runs on a compiled core. Emacs (with elisp) is by far the most widely known such system among home users, but there have been other heavily used editors such as Freemacs (MINT), JED (S-Lang), XEDIT (Rexx), ADAM (TPU), and SlickEdit (Slick-C). In this case, by "power" I'm not referring to extensibility but to realized features. There are three main areas which I think a commercial text editor might be an improvement over Emacs: Stability The only apps I regularly use on Linux that give me flaky behavior are Emacs, Gedit, and Geany. On Windows, I like the look and features of Notepad++, but I find it extremely unstable, especially if I try to use the plugins. Whatever I happen to be doing, I'm using some text editor practically all day long. If I could switch to an editor that never gave me problems, it would definitely lower my stress level. Tools When I started using Emacs, I searched the manual cover to cover to gleam ideas for clever, useful things I could do with it. I'd like to see lots of useful features for editing code, based on detailed knowledge of what the system can do and the accumulated feedback of users. Polish The rule of threes goes that if you develop something for yourself, it's three times harder to make it usable in-house, and three times harder again to make it a viable product for sale. It's understandable, but free software development doesn't seem to benefit from much usability testing. BTW, texteditors.org is a fantastic resource for researching text editors.

    Read the article

  • extract data from Plist to array and dictionary

    - by Boaz
    Hi I made a plist that looks like that: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList 1.0.dtd"> <plist version="1.0"> <array> <array> <dict> <key>Company</key> <string>xxx</string> <key>Title</key> <string>VP Marketing</string> <key>Name</key> <string>Alon ddfr</string> </dict> <dict> <key>Name</key> <string>Adam Ben Shushan</string> <key>Title</key> <string>CEO</string> <key>Company</key> <string>Shushan ltd.</string> </dict> </array> <array> <dict> <key>Company</key> <string>xxx</string> <key>Title</key> <string>CTO</string> <key>Name</key> <string>Boaz frf</string> </dict> </array> </array> </plist> Now I want to extract the data like that (all the 'A' for key "Name" to one section and all the 'B' "Name" to other one): NSString *plistpath = [[NSBundle mainBundle] pathForResource:@"PeopleData" ofType:@"plist"]; NSMutableArray *attendees = [[NSMutableArray alloc] initWithContentsOfFile:plistpath]; listOfPeople = [[NSMutableArray alloc] init];//Add items NSDictionary *indexADict = [NSDictionary dictionaryWithObject:[[attendees objectAtIndex:0] objectForKey:@"Name"] forKey:@"Profiles"]; NSDictionary *indexBDict = [NSDictionary dictionaryWithObject:[[attendees objectAtIndex:1] objectForKey:@"Name"] forKey:@"Profiles"]; [listOfPeople addObject:indexADict]; [listOfPeople addObject:indexBDict]; This in order to view them in sectioned tableView. I know that the problem is here: NSDictionary *indexADict = [NSDictionary dictionaryWithObject:[[attendees objectAtIndex:0] objectForKey:@"Name"] forKey:@"Profiles"]; But I just can't figure how to do it right. Thanks.

    Read the article

  • ColdFusion's cfquery failing silently

    - by johnthexiii
    I have a query that retrieves a large amount of data. <cfsetting requesttimeout="9999999" > <cfquery name="randomething" datasource="ds" timeout="9999999" > SELECT col1, col2 FROM table </cfquery> <cfdump var="#randomething.recordCount#" /> <!---should be about 5 million rows ---> I can successfully retrieve the data with python's cx_Oracle and using sys.getsizeof on the python list returns 22621060, so about 21 megabytes. ColdFusion does not return an error on the page, and I can't find anything in any of the logs. Why is cfdump not showing the number of rows? Additional Information The reason for doing it this way is because I have about 8000 smaller queries to run against the randomthing query. In other words when I run those 8000 queries against the database it takes hours for that process to complete. I suspect this is because I am competing with several other database users, and the database is getting bogged down. The 8000 smaller queries are getting counts of col1 over a period of col2. SELECT count(col1) as count WHERE col2 < 20121109 AND col2 > 20121108 According to Adam Cameron's suggestions. cflog is suggesting that the query isn't finishing. I tried changing the queries timeout both in the code and in the CFIDE/administrator, apparently CF9 no long respects the timeout attribute, regardless of what I tried I couldn't get the query to timeout. I also started playing around with the maxrows attribute to see if I could discern any information that way. when maxrows is set to 1300000 everything works fine when maxrows is 1400000 or greater I get this error when maxrows is 2000000 I observe my original problem Update So this isn't a limit of cfquery. By using QueryNew then looping over it to add data and I can get well past the 2 million mark without any problems. I also created a ThinClient datasource using the information in this question, I didn't observe any change in behavior. The messages on the database end are SQL*Net message from client and SQL*Net more data to client I just discovered that by using the thin client along with blockfactor1="100" I can retrieve more rows (appx. 3000000).

    Read the article

  • SQLAuthority News – Tips for Traveling to Nepal

    - by pinaldave
    If you are a regular reader of this blog, you might know that I travel nearly 20+ days out of 30 days in a month. There are cases when I don’t have a chance to go home for an entire month and my family has to travel to different cities just to meet me. During my recent visit, one of my acquaintances suggested that I should blog about my travel experiences as well. This can be helpful to others who are traveling to the country or city. I have previously written about my experience about all the airlines in India. I would be writing about a few tips about traveling to the beautiful country Nepal today. Kathmandu, the capital of Nepal is very scenic. There are lots of historical places to see and visit. I was fortunate enough to stopover the Pashupatinath Temple, Bhaktapur, Vasantpur and the temple of Kumari Goddess. I also visited casinos there, but even if  I have stayed in Las Vegas for 3 and a half years before, I was not keen on them so I left the casinos just like what I did in Las Vegas . I also traveled to the famous Thamel area by car. Here are my quick tips for anyone who is planning to visit Nepal. They are not categorized but just written in the order that came to my mind. Please note that if you are an Indian, you will get a special privilege everywhere in Nepal, beginning right from the Indian airports. Use the expression “Nameste!” If you want to greet any Indian or Nepali. Indian Nationals do not need visa/passport to enter Nepal. In fact, Indian Nationals can just walk in to Nepal without any passport; but should have any valid Indian ID. There is no use of a passport since it will not be stamped at any immigration ports, whether in India or Nepal. Indian currency is widely accepted everywhere. However, please bring only Rs. 100 bills/notes as Rs. 500 or Rs. 1000 are not accepted. However, casinos there will accept larger bills. Indian National Language – Hindi is widely spoken and understood everywhere. I did not find a single person who had trouble speaking it. Nepali language uses the scripting language as Devnagari, which is similar to Hindi. Here, you will find food of almost every country.  The taste of Nepali food is authentic and very delicious. It is very safe to travel and move around in Kathmandu (despite what media suggests). However, it will really help if you have a friend who speaks Nepali. You can negotiate a few deals and cut off to almost 1/5 of the original quoted price of products sold here. If you are from Gujarat, India – you will find Nepali language sharing many common words. Temples are everywhere, so do not miss to visit a few of them. Pashupatinath is a must. Only followers of Hindu religion (from Nepal and India only) are allowed in most of the holy places. Camera is allowed everywhere except on the holy places. Now it is your turn to share your opinions or any suggestions. I think Nepal is a great country as there are lots of places to visit. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, T SQL, Technology

    Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >