Search Results

Search found 3722 results on 149 pages for 'choice'.

Page 141/149 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Best way to get back to using the power of lxml after having to use a regex to find something in an

  - by PyNEwbie

  I am trying to rip some text out of a large number of html documents (numbers in the hundreds of thousands). The documents are really forms but they are prepared by a very large group of different organizations so there is significant variation in how they create the document. For example, the documents are divided into chapters. I might want to extract the contents of Chapter 5 from every document so I can analyze the content of the chapter. Initially I thought this would be easy but it turns out that the authors might use a set of non-nested tables throughout the document to hold the content so that Chapter n could be displayed using td tags inside a table. Or they might use other elements such as p tags H tags, div tags or any other block level element. After trying repeatedly to use lxml to help me identify the beginning and end of each chapter I have determined that it is a lot cleaner to use a regular expression because in every case, no matter what the enclosing html element is the chapter label is always in the form of >Chapter # It is a little more complicated in that there might be some white space or non-breaking space represented in different ways (  or   or just spaces). Nonetheless it was trivial to write a regular expression to identify the beginning of each section. (The beginning of one section is the end of the previous section.) But now I want to use lxml to get the text out. My thought is that I have really no choice but to walk along my string to find the close tag for the element that encloses the text I am using to find the relevant section. That is here is one example where the element holding the Chapter name is a div <div style="DISPLAY: block; MARGIN-LEFT: 0pt; TEXT-INDENT: 0pt; MARGIN-RIGHT: 0pt" align="left"><font style="DISPLAY: inline; FONT-WEIGHT: bold; FONT-SIZE: 10pt; FONT-FAMILY: Times New Roman">Chapter 1.&#160;&#160;&#160;Our Beginnings.</font></div> So I am imagining that I would begin at the location where I found the match for chapter 1 and set up a regular expressions to find the next </div|</td|</p|</h1 . . . So at this point I have identified the type of element holding my chapter heading I can use the same logic to find all of the text that is within that element that is set up a regular expression to help me mark from >Chapter 1.&#160;&#160;&#160;Our Beginnings.< So I have identified where my Chapter 1 begins I can do the same for chapter 2 (which is where Chapter 1 ends) Now I am imagining that I am going to snip the document beginning at the opening of the element that I identified as the element the indicates where chapter 1 begins and ending just before the opening of the element that I identified as the element that indicates where Chapter 2 begins. The string that I have identified will then be fed to lxml to use its power to get the content. I am going to all of this trouble because I have read over and over - never use a regular expression to extract content from html documents and I have not hit on a way to be as accurate with lxml to identify the starting and ending locations for the text I want to extract. For example, I can never be certain that the subtitle of Chapter 1 is Our Beginnings it could be Our Red Canary. Let me say that I spent two solid days trying with lxml to be confident that I had the beginning and ending elements and I could only be accurate <60% of the time but a very short regular expression has given me better than 95% success. I have a tendency to make things more complicated than necessary so I am wondering if anyone has seen or solved a similar problems and if they had an approach (not the details mind you) that they would like to offer.

  Read the article

• How do I get through proxy server environments for non-standard services?

  - by Ripred

  I'm not real hip on exactly what role(s) today's proxy servers can play and I'm learning so go easy on me :-) I have a client/server system I have written using a homegrown protocol and need to enhance the client side to negotiate its way out of a proxy environment. I have an existing client and server system written in C and C++ for the speed and a small amount of MFC in the client to handle the user interface. I have written both the server and client side of the system on Windows (the people I work for are mainly web developers using Windows everything - not a choice) sticking to Berkeley Sockets as it were via wsock32 for efficiency. The clients connect to the server through a nonstandard port (even though using port 80 is an option to get out of some environments but the protocol that goes over it isn't HTTP). The TCP connection(s) stay open for the duration of the clients participation in real time conferences. Our customer base is expanding to all kinds of networked environments. I have been able to solve a lot of problems by adding the ability to connect securely over port 443 and using secure sockets which allows the protocol to pass through a lot environments since the internal packets can't be sniffed. But more and more of our customers are behind a proxy server environment and my direct connections don't make it through. My old school understanding of proxy servers is that they act as a proxy for external HTML content over HTTP, possibly locally caching popular material for faster local access, and also allowing their IT staff to blacklist certain destination sites. Customer are complaining that my software doesn't recognize and easily navigate its way through their proxy environments but I'm finding it difficult to decide what my "best fit" solution should be. My software doesn't tear down the connection after each client request, and on top of that packets can come from either side at any time, basically your typical custom client/server system for a specific niche. My first reaction is "why can't they just add my servers addresses to their white list" but if there is a programmatic way I can get through without requiring their IT staff to help it is politically better and arguably a better solution anyway. Plus maybe I'm still not understanding the role and purpose of what proxy servers and environments have grown to be these days. My first attempt at a solution was to use WinInet with its various proxy capabilities to establish a connection over port 80 to my non-standard protocol server (which knows enough to recognize and answer a simple HTTP-looking GET request and answer it with a simple HTTP response page to get around some environments that employ initial packet sniffing (DPI)). I retrieved the actual SOCKET handle behind WinInet's HINTERNET request object and had hoped to use that in place of my software's existing SOCKET connection and hopefully not need to change much more on the client side. It initially seemed to be my solution but on further inspection it seems that the OS gets first-chance at the received data on this socket since when I get notified of events via the standard select(...) statement on the socket and query the size of the data available via ioctlsocket the call succeeds but returns 0 bytes available, the reads don't work and it goes downhill from there. Can someone tell me of a client-side library (commercial is fine) will let me get past these proxy server environments with as little user and IT staff help as possible? From what I read it has grown past SOCKS and I figure someone has to have solved this problem before me. Thanks for reading my long-winded question, Ripred

  Read the article

• Facebook invites partialy working..

  - by dugi007

  Hello! im new to facebook api and i have a litle problem.. i created iframe app and im using the folowing code to invite my friends. invitation screen renders and im able to send invitation. when someone accepts invitation it redirects them to the following link: http://www.facebook.com/reqs.php#!//apps.facebook.com/erste_app/ and nothing happens (only the facebook header apears and thats all)...when they manualy repost that link they are redirected to app and everything works... <?php include 'facebook.php'; define( 'FB_API_KEY', 'e23463********9c7ebfd6d34' ); define( 'FB_SECRET', '5f6************7efff5c8cb8' ); define( 'FB_APPID', '312*********23' ); define( 'FB_CANVAS_URL', 'http://apps.facebook.com/erste_app/' ); define( 'FB_APP_HOME_URL', 'http://www.bijelarukavica.com/test/' ); define( 'FB_APP_NAME', 'Zaigraj s Rokom' ); $bOK=SendStandardInvitation("", false); function SendStandardInvitation($to, $bNewStyle = true) { $typeword = FB_APP_NAME; // Warning: double quotes in the content string will screw up the invite signature process $content = '<fb:req-choice url=\' ' . FB_CANVAS_URL . '\' label=\'Check out ' . FB_APP_NAME . ' />'; // if your have post add routines take them to that add app URL instead. $actionText = 'Probaj jesi bolji od mene uz "' . FB_APP_NAME . '".'; $bOK = SendNewRequest($to, $typeword, $content, $actionText); return $bOK; } function SendNewRequest($to, $typeword, $content, $actionText, $bInvitation = true) { $facebook = new Facebook(FB_API_KEY,FB_SECRET); $to = implode(",", $facebook->api_client->friends_get('','')); $bInviteAll = (!$to || $to == "" ? true : false); $excludeFriends = null; if (!$bInviteAll) $excludeFriends = $facebook->api_client->friends_get(); else // Get all friends with the app $excludeFriends = $facebook->api_client->friends_getAppUsers(); $excludeFriendsStr = null; foreach ($excludeFriends as $userid) { $pos = strpos($to, (string)$userid); if ($pos !== false) continue; if ($excludeFriendsStr) $excludeFriendsStr .= ','; $excludeFriendsStr .= $userid; } $params = array(); $params['api_key'] = FB_API_KEY; $params['content'] = $content; // Don't use htmlentities() or urlencode() here $params['type'] = $typeword; $params['action'] = FB_CANVAS_URL ; $params['actiontext'] = $actionText; $params['invite'] = ($bInvitation ? 'true' : 'false'); $params['rows'] = '5'; $params['max'] = '20'; $params['exclude_ids'] = $excludeFriendsStr; $params['sig'] = $facebook->generate_sig($params, FB_SECRET); $qstring = null; foreach ($params as $key => $value) { if ($qstring) $qstring .= '&'; $qstring .= "$key=".urlencode($value); } $inviteUrl = 'http://www.facebook.com/multi_friend_selector.php?'; $facebook->redirect($inviteUrl . $qstring); return true; } $facebook->api_client->notifications_sendRequest function SendRequest($to, $typeword, $content, $bInvitation = true) { $facebook = new Facebook(FB_API_KEY,FB_SECRET); $image = FB_APP_HOME_URL . 'logo.gif'; $result = $facebook->api_client->notifications_sendRequest($to, $typeword, $content, $image, $bInvitation); $url = $result; if (isset($url) && $url) { $facebook->redirect($url . '&canvas=1&next=index.php'); return true; } $bOK = ($result && $result != ""); return $bOK; } SendStandardInvitation($to, $bNewStyle = false) ?>

  Read the article

• Languages and VMs: Features that are hard to optimize and why

  - by mrjoltcola

  I'm doing a survey of features in preparation for a research project. Name a mainstream language or language feature that is hard to optimize, and why the feature is or isn't worth the price paid, or instead, just debunk my theories below with anecdotal evidence. Before anyone flags this as subjective, I am asking for specific examples of languages or features, and ideas for optimization of these features, or important features that I haven't considered. Also, any references to implementations that prove my theories right or wrong. Top on my list of hard to optimize features and my theories (some of my theories are untested and are based on thought experiments): 1) Runtime method overloading (aka multi-method dispatch or signature based dispatch). Is it hard to optimize when combined with features that allow runtime recompilation or method addition. Or is it just hard, anyway? Call site caching is a common optimization for many runtime systems, but multi-methods add additional complexity as well as making it less practical to inline methods. 2) Type morphing / variants (aka value based typing as opposed to variable based) Traditional optimizations simply cannot be applied when you don't know if the type of someting can change in a basic block. Combined with multi-methods, inlining must be done carefully if at all, and probably only for a given threshold of size of the callee. ie. it is easy to consider inlining simple property fetches (getters / setters) but inlining complex methods may result in code bloat. The other issue is I cannot just assign a variant to a register and JIT it to the native instructions because I have to carry around the type info, or every variable needs 2 registers instead of 1. On IA-32 this is inconvenient, even if improved with x64's extra registers. This is probably my favorite feature of dynamic languages, as it simplifies so many things from the programmer's perspective. 3) First class continuations - There are multiple ways to implement them, and I have done so in both of the most common approaches, one being stack copying and the other as implementing the runtime to use continuation passing style, cactus stacks, copy-on-write stack frames, and garbage collection. First class continuations have resource management issues, ie. we must save everything, in case the continuation is resumed, and I'm not aware if any languages support leaving a continuation with "intent" (ie. "I am not coming back here, so you may discard this copy of the world"). Having programmed in the threading model and the contination model, I know both can accomplish the same thing, but continuations' elegance imposes considerable complexity on the runtime and also may affect cache efficienty (locality of stack changes more with use of continuations and co-routines). The other issue is they just don't map to hardware. Optimizing continuations is optimizing for the less-common case, and as we know, the common case should be fast, and the less-common cases should be correct. 4) Pointer arithmetic and ability to mask pointers (storing in integers, etc.) Had to throw this in, but I could actually live without this quite easily. My feelings are that many of the high-level features, particularly in dynamic languages just don't map to hardware. Microprocessor implementations have billions of dollars of research behind the optimizations on the chip, yet the choice of language feature(s) may marginalize many of these features (features like caching, aliasing top of stack to register, instruction parallelism, return address buffers, loop buffers and branch prediction). Macro-applications of micro-features don't necessarily pan out like some developers like to think, and implementing many languages in a VM ends up mapping native ops into function calls (ie. the more dynamic a language is the more we must lookup/cache at runtime, nothing can be assumed, so our instruction mix is made up of a higher percentage of non-local branching than traditional, statically compiled code) and the only thing we can really JIT well is expression evaluation of non-dynamic types and operations on constant or immediate types. It is my gut feeling that bytecode virtual machines and JIT cores are perhaps not always justified for certain languages because of this. I welcome your answers.

  Read the article

• How to design a C / C++ library to be usable in many client languages?

  - by Brian Schimmel

  I'm planning to code a library that should be usable by a large number of people in on a wide spectrum of platforms. What do I have to consider to design it right? To make this questions more specific, there are four "subquestions" at the end. Choice of language Considering all the known requirements and details, I concluded that a library written in C or C++ was the way to go. I think the primary usage of my library will be in programs written in C, C++ and Java SE, but I can also think of reasons to use it from Java ME, PHP, .NET, Objective C, Python, Ruby, bash scrips, etc... Maybe I cannot target all of them, but if it's possible, I'll do it. Requirements It would be to much to describe the full purpose of my library here, but there are some aspects that might be important to this question: The library itself will start out small, but definitely will grow to enormous complexity, so it is not an option to maintain several versions in parallel. Most of the complexity will be hidden inside the library, though The library will construct an object graph that is used heavily inside. Some clients of the library will only be interested in specific attributes of specific objects, while other clients must traverse the object graph in some way Clients may change the objects, and the library must be notified thereof The library may change the objects, and the client must be notified thereof, if it already has a handle to that object The library must be multi-threaded, because it will maintain network connections to several other hosts While some requests to the library may be handled synchronously, many of them will take too long and must be processed in the background, and notify the client on success (or failure) Of course, answers are welcome no matter if they address my specific requirements, or if they answer the question in a general way that matters to a wider audience! My assumptions, so far So here are some of my assumptions and conclusions, which I gathered in the past months: Internally I can use whatever I want, e.g. C++ with operator overloading, multiple inheritance, template meta programming... as long as there is a portable compiler which handles it (think of gcc / g++) But my interface has to be a clean C interface that does not involve name mangling Also, I think my interface should only consist of functions, with basic/primitive data types (and maybe pointers) passed as parameters and return values If I use pointers, I think I should only use them to pass them back to the library, not to operate directly on the referenced memory For usage in a C++ application, I might also offer an object oriented interface (Which is also prone to name mangling, so the App must either use the same compiler, or include the library in source form) Is this also true for usage in C# ? For usage in Java SE / Java EE, the Java native interface (JNI) applies. I have some basic knowledge about it, but I should definitely double check it. Not all client languages handle multithreading well, so there should be a single thread talking to the client For usage on Java ME, there is no such thing as JNI, but I might go with Nested VM For usage in Bash scripts, there must be an executable with a command line interface For the other client languages, I have no idea For most client languages, it would be nice to have kind of an adapter interface written in that language. I think there are tools to automatically generate this for Java and some others For object oriented languages, it might be possible to create an object oriented adapter which hides the fact that the interface to the library is function based - but I don't know if its worth the effort Possible subquestions is this possible with manageable effort, or is it just too much portability? are there any good books / websites about this kind of design criteria? are any of my assumptions wrong? which open source libraries are worth studying to learn from their design / interface / souce? meta: This question is rather long, do you see any way to split it into several smaller ones? (If you reply to this, do it as a comment, not as an answer)

  Read the article

• Data munging and data import scripting

  - by morpheous

  I need to write some scripts to carry out some tasks on my server (running Ubuntu server 8.04 TLS). The tasks are to be run periodically, so I will be running the scripts as cron jobs. I have divided the tasks into "group A" and "group B" - because (in my mind at least), they are a bit different. Task Group A import data from a file and possibly reformat it - by reformatting, I mean doing things like santizing the data, possibly normalizing it and or running calculations on 'columns' of the data Import the munged data into a database. For now, I am mostly using mySQL for the vast majority of imports - although some files will be imported into a sqlLite database. Note: The files will be mostly text files, although some of the files are in a binary format (my own proprietary format, written by a C++ application I developed). Task Group B Extract data from the database Perform calculations on the data and either insert or update tables in the database. My coding experience is is primarily as a C/C++ developer, although I have been using PHP as well for the last 2 years or so. I am from a windows background so I am still finding my feet in the linux environment. My question is this - I need to write scripts to perform the tasks I described above. Although I suppose I could write a few C++ applications to be used in the shell scripts, I think it may be better to write them in a scripting language (maybe this is a flawed assumption?). My thinking is that it would be easier to modify thins in a script - no need to rebuild etc for changes to functionality. Additionally, C++ data munging in C++ tends to involve more lines of code than "natural" scripting languages such as Perl, Python etc. Assuming that the majority of people on here agree that scripting is the way to go, herein lies my dilema. Which scripting language to use to perform the tasks above (giving my background). My gut instinct tells me that Perl (shudder) would be the most obvious choice for performing all of the above tasks. BUT (and that is a big BUT). The mere mention of Perl makes my toes curl, as I had a very, very bag experience with it a while back. The syntax seems quite unnatural to me - despite how many times I have tried to learn it - so if possible, I would really like to give it a miss. PHP (which I already know), also am not sure is a good candidate for scripting on the CLI (I have not seen many examples on how to do this etc - so I may be wrong). The last thing I must mention is that IF I have to learn a new language in order to do this, I cannot afford (time constraint) to spend more than a day, in learning the key commands/features required in order to do this (I can always learn the details of the language later, once I have actually deployed the scripts). So, which scripting language would you recommend (PHP, Python, Perl, [insert your favorite here]) - and most importantly WHY?. Or, should I just stick to writing little C++ applications that I call in a shell script?. Lastly, if you have suggested a scripting language, can you please show with a FEW lines (Perl mongers - I'm looking in your direction [nothing to cryptic!] ;) ) how I can use the language you suggested to do what I want to do. Hopefully, the lines you present will convince me that it can be done easily and elegantly in the language you suggested.

  Read the article

• Typesafe fire-and-forget asynchronous delegate invocation in C#

  - by LBushkin

  I recently found myself needing a typesafe "fire-and-forget" mechanism for running code asynchronously. Ideally, what I would want to do is something like: var myAction = (Action)(() => Console.WriteLine("yada yada")); myAction.FireAndForget(); // async invocation Unfortunately, the obvious choice of calling BeginInvoke() without a corresponding EndInvoke() does not work - it results in a slow resource leak (since the asyn state is held by the runtime and never released ... it's expecting an eventual call to EndInvoke(). I also can't run the code on the .NET thread pool because it may take a very long time to complete (it's advised to only run relatively short-lived code on the thread pool) - this makes it impossible to use the ThreadPool.QueueUserWorkItem(). Initially, I only needed this behavior for methods whose signature matches Action, Action<...>, or Func<...>. So I put together a set of extension methods (see listing below) that let me do this without running into the resource leak. There are overloads for each version of Action/Func. Unfortunately, I now want to port this code to .NET 4 where the number of generic parameters on Action and Func have been increased substantially. Before I write a T4 script to generate these, I was also hoping to find a simpler more elegant way to do this. Any ideas are welcome. public static class AsyncExt { public static void FireAndForget( this Action action ) { action.BeginInvoke(OnActionCompleted, action); } public static void FireAndForget<T1>( this Action<T1> action, T1 arg1 ) { action.BeginInvoke(arg1, OnActionCompleted<T1>, action); } public static void FireAndForget<T1,T2>( this Action<T1,T2> action, T1 arg1, T2 arg2 ) { action.BeginInvoke(arg1, arg2, OnActionCompleted<T1, T2>, action); } public static void FireAndForget<TResult>(this Func<TResult> func, TResult arg1) { func.BeginInvoke(OnFuncCompleted<TResult>, func); } public static void FireAndForget<T1,TResult>(this Func<T1, TResult> action, T1 arg1) { action.BeginInvoke(arg1, OnFuncCompleted<T1,TResult>, action); } // more overloads of FireAndForget<..>() for Action<..> and Func<..> private static void OnActionCompleted( IAsyncResult result ) { var action = (Action)result.AsyncState; action.EndInvoke(result); } private static void OnActionCompleted<T1>( IAsyncResult result ) { var action = (Action<T1>)result.AsyncState; action.EndInvoke( result ); } private static void OnActionCompleted<T1,T2>(IAsyncResult result) { var action = (Action<T1,T2>)result.AsyncState; action.EndInvoke(result); } private static void OnFuncCompleted<TResult>( IAsyncResult result ) { var func = (Func<TResult>)result.AsyncState; func.EndInvoke( result ); } private static void OnFuncCompleted<T1,TResult>(IAsyncResult result) { var func = (Func<T1, TResult>)result.AsyncState; func.EndInvoke(result); } // more overloads of OnActionCompleted<> and OnFuncCompleted<> }

  Read the article

• dual boot install--no GRUB

  - by Jim Syyap

  My computer recently had a hardware upgrade and now runs on Windows 7. I decided to install Ubuntu 11.04 as dual boot using the ISO I got from ubuntu.com downloaded onto my USB stick. Restarting with the USB stick, I was able to install Ubuntu 11.04 choosing the option: Install Ubuntu 11.04 side by side with Windows 7 (or something like that). No errors were encountered on installation. However on restarting, there was no GRUB; the system went straight into Windows 7. Looking for answers, I found these: http://essayboard.com/2011/07/12/how-to-dual-boot-ubuntu-11-04-and-windows-7-the-traditional-way-through-grub-2/ http://ubuntuforums.org/showthread.php?t=1774523 Following their instructions, I got: Boot Info Script 0.60 from 17 May 2011 ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sda. => Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdb. => Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos7)/boot/grub on this drive. sda1: __________________________________________________ ________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /grldr /bootmgr /Boot/BCD /grldr sda2: __________________________________________________ ________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sdb1: __________________________________________________ ________________________ File system: vfat Boot sector type: SYSLINUX 4.02 debian-20101016 ...........>...r>....... ......0...~.k...~...f...M.f.f....f..8~....>2} Boot sector info: Syslinux looks at sector 1437504 of /dev/sdb1 for its second stage. SYSLINUX is installed in the directory. The integrity check of the ADV area failed. According to the info in the boot sector, sdb1 starts at sector 0. But according to the info from fdisk, sdb1 starts at sector 62. Operating System: Boot files: /boot/grub/grub.cfg /syslinux/syslinux.cfg /ldlinux.sys sdc1: __________________________________________________ ________________________ File system: ntfs Boot sector type: Windows XP Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sdc2: __________________________________________________ ________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdc5: __________________________________________________ ________________________ File system: swap Boot sector type: - Boot sector info: sdc6: __________________________________________________ ________________________ File system: swap Boot sector type: - Boot sector info: sdc7: __________________________________________________ ________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdc8: __________________________________________________ ________________________ File system: swap Boot sector type: - Boot sector info: Going back into Ubuntu and running sudo fdisk -l , I got these: ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002f393 Device Boot Start End Blocks Id System /dev/sda1 * 1 13 102400 7 HPFS/NTFS Partition 1 does not end on cylinder boundary. /dev/sda2 13 19458 156185600 7 HPFS/NTFS Disk /dev/sdb: 2011 MB, 2011168768 bytes 62 heads, 62 sectors/track, 1021 cylinders Units = cylinders of 3844 * 512 = 1968128 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2ab9 Device Boot Start End Blocks Id System /dev/sdb1 * 1 1021 1962331 c W95 FAT32 (LBA) Disk /dev/sdc: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00261ddd Device Boot Start End Blocks Id System /dev/sdc1 * 1 60657 487222656+ 7 HPFS/NTFS /dev/sdc2 60657 121600 489527681 5 Extended /dev/sdc5 120563 121600 8337703+ 82 Linux swap / Solaris /dev/sdc6 120073 120562 3930112 82 Linux swap / Solaris /dev/sdc7 60657 119584 473328640 83 Linux /dev/sdc8 119584 120072 3923968 82 Linux swap / Solaris Should I proceed and do the following? Assuming Ubuntu 11.04 was installed on device sdb1, do this: sudo mount /dev/sdb1 /mnt Then do this: sudo grub-install--root-directory=/mnt /dev/sdb Notice there are two dashes in front of the root directory, and I'm not using sdb1 but sdb. Since the command in step 15 had reinstalled Grub 2, now we need to unmount the /mnt (i.e. sdb1) to clean up. Do this: sudo umount /mnt Reboot and remove Ubuntu 11.04 CD/DVD from disk tray. Log into Ubuntu 11.04 (you have no choice but it will make you log into Ubuntu 11.04 at this point). Open up a terminal in Ubuntu 11.04 (using real installation, not live CD/DVD). Execute this command: sudo update-grub Reboot the machine.

  Read the article

• How can I keep my MVC Views, models, and model binders as clean as possible?

  - by MBonig

  I'm rather new to MVC and as I'm getting into the whole framework more and more I'm finding the modelbinders are becoming tough to maintain. Let me explain... I am writing a basic CRUD-over-database app. My domain models are going to be very rich. In an attempt to keep my controllers as thin as possible I've set it up so that on Create/Edit commands the parameter for the action is a richly populated instance of my domain model. To do this I've implemented a custom model binder. As a result, though, this custom model binder is very specific to the view and the model. I've decided to just override the DefaultModelBinder that ships with MVC 2. In the case where the field being bound to my model is just a textbox (or something as simple), I just delegate to the base method. However, when I'm working with a dropdown or something more complex (the UI dictates that date and time are separate data entry fields but for the model it is one Property), I have to perform some checks and some manual data munging. The end result of this is that I have some pretty tight ties between the View and Binder. I'm architecturally fine with this but from a code maintenance standpoint, it's a nightmare. For example, my model I'm binding here is of type Log (this is the object I will get as a parameter on my Action). The "ServiceStateTime" is a property on Log. The form values of "log.ServiceStartDate" and "log.ServiceStartTime" are totally arbitrary and come from two textboxes on the form (Html.TextBox("log.ServiceStartTime",...)) protected override object GetPropertyValue(ControllerContext controllerContext, ModelBindingContext bindingContext, PropertyDescriptor propertyDescriptor, IModelBinder propertyBinder) { if (propertyDescriptor.Name == "ServiceStartTime") { string date = bindingContext.ValueProvider.GetValue("log.ServiceStartDate").ConvertTo(typeof (string)) as string; string time = bindingContext.ValueProvider.GetValue("log.ServiceStartTime").ConvertTo(typeof (string)) as string; DateTime dateTime = DateTime.Parse(date + " " + time); return dateTime; } if (propertyDescriptor.Name == "ServiceEndTime") { string date = bindingContext.ValueProvider.GetValue("log.ServiceEndDate").ConvertTo(typeof(string)) as string; string time = bindingContext.ValueProvider.GetValue("log.ServiceEndTime").ConvertTo(typeof(string)) as string; DateTime dateTime = DateTime.Parse(date + " " + time); return dateTime; } The Log.ServiceEndTime is a similar field. This doesn't feel very DRY to me. First, if I refactor the ServiceStartTime or ServiceEndTime into different field names, the text strings may get missed (although my refactoring tool of choice, R#, is pretty good at this sort of thing, it wouldn't cause a build-time failure and would only get caught by manual testing). Second, if I decided to arbitrarily change the descriptors "log.ServiceStartDate" and "log.ServiceStartTime", I would run into the same problem. To me, runtime silent errors are the worst kind of error out there. So, I see a couple of options to help here and would love to get some input from people who have come across some of these issues: Refactor any text strings in common between the view and model binders out into const strings attached to the ViewModel object I pass from controller to the aspx/ascx view. This pollutes the ViewModel object, though. Provide unit tests around all of the interactions. I'm a big proponent of unit tests and haven't started fleshing this option out but I've got a gut feeling that it won't save me from foot-shootings. If it matters, the Log and other entities in the system are persisted to the database using Fluent NHibernate. I really want to keep my controllers as thin as possible. So, any suggestions here are greatly welcomed! Thanks

  Read the article

• iOS: Interpreted code - where do they draw the line?

  - by d7samurai

  Apple's iOS developer guidelines state: 3.3.2 — An Application may not itself install or launch other executable code by any means, including without limitation through the use of a plug-in architecture, calling other frameworks, other APIs or otherwise. No interpreted code may be downloaded or used in an Application except for code that is interpreted and run by Apple’s Documented APIs and built-in interpreter(s). Assuming that downloading data - like XML and images (or a game level description), for example - at run-time is allowed (as is my impression), I am wondering where they draw the line between "data" and "code". Picture the scenario of an app that delivers interactive "presentations" to users (like a survey, for instance). Presentations are added continuously to the server and different presentations are made available to different users, so they cannot be part of the initial app download (this is the whole point). They are described in XML format, but being interactive, they might contain conditional branching of this sort (shown in pseudo form to exemplify): <options id="Gender"> <option value="1">Male</option> <option value="2">Female</option> </options> <branches id="Gender"> <branch value="1"> <image src="Man" /> </branch> <branch value="2"> <image src="Woman" /> </branch> </branches> When the presentation is "played" within the app, the above would be presented in two steps. First a selection screen where the user can click on either of the two choices presented ("Male" or "Female"). Next, an image will be [downloaded dynamically] and displayed based on the choice made in the previous step. Now, it's easy to imagine additional tags describing further logic still. For example, a containing tag could be added: <loop count="3"> <options... /> <branches... /> </loop> The result here being that the selection screen / image screen pair would be sequentially presented three times over, of course. Or imagine some description of a level in a game. It's easy to view that as passive "data", but if it includes, say, several doorways that the user can go through and with various triggers, traps and points attached to them etc - isn't that the same as using a script - or, indeed, interpreted code - to describe options and their conditional responses? Assuming that the interpretation engine for this XML data is already present in the app and that such presentations can only be consumed (not created or edited) in the app, how would this fare against Apple's iOS guidelines? Doesn't XML basically constitute a scripting language (couldn't any interpreted programming language simply be described by XML) in this sense? Would it be OK if the proprietary scripting language (ref the XML used above) was strictly sandboxed (how can they tell?) and not given access to the operating system in any way (but able to download content dynamically - and upload results to the authoring server)? Where does the line go?

  Read the article

• Path to background in servlet

  - by kapil chhattani

  //the below line is the element of my HTML form which renders the image sent by the servlet written further below. <img style="margin-left:91px; margin-top:-6px;" class="image" src="http://www.abcd.com/captchaServlet"> I generate a captcha code using the following code in java. public class captchaServlet extends HttpServlet { protected void processRequest(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { int width = 150; int height = 50; int charsToPrint = 6; String elegibleChars = "ABCDEFGHJKLMPQRSTUVWXYabcdefhjkmnpqrstuvwxy1234567890"; char[] chars = elegibleChars.toCharArray(); StringBuffer finalString = new StringBuffer(); for ( int i = 0; i < charsToPrint; i++ ) { double randomValue = Math.random(); int randomIndex = (int) Math.round(randomValue * (chars.length - 1)); char characterToShow = chars[randomIndex]; finalString.append(characterToShow); } System.out.println(finalString); BufferedImage bufferedImage = new BufferedImage(width, height, BufferedImage.TYPE_INT_RGB); Graphics2D g2d = bufferedImage.createGraphics(); Font font = new Font("Georgia", Font.BOLD, 18); g2d.setFont(font); RenderingHints rh = new RenderingHints( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON); rh.put(RenderingHints.KEY_RENDERING, RenderingHints.VALUE_RENDER_QUALITY); g2d.setRenderingHints(rh); GradientPaint gp = new GradientPaint(0, 0, Color.BLUE, 0, height/2, Color.black, true); g2d.setPaint(gp); g2d.fillRect(0, 0, width, height); g2d.setColor(new Color(255, 255, 0)); Random r = new Random(); int index = Math.abs(r.nextInt()) % 5; char[] data=new String(finalString).toCharArray(); String captcha = String.copyValueOf(data); int x = 0; int y = 0; for (int i=0; i<data.length; i++) { x += 10 + (Math.abs(r.nextInt()) % 15); y = 20 + Math.abs(r.nextInt()) % 20; g2d.drawChars(data, i, 1, x, y); } g2d.dispose(); response.setContentType("image/png"); OutputStream os = response.getOutputStream(); ImageIO.write(bufferedImage, "png", os); os.close(); } protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); } protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { processRequest(request, response); } } But in the above code background is also generated using the setPaint menthod I am guessing. I want the background to be some image from my local machine whoz URL i should be able to mention like URL url=this.getClass().getResource("Desktop/images.jpg"); BufferedImage bufferedImage = ImageIO.read(url); I am just writing the above two lines for making the reader understand better what the issue is. Dont want to use the exact same commands. All I want is the the background of the captcha code generated should be an image of my choice.

  Read the article

• Adding picture in symfony 2 from symfony form?

  - by user2833510

  How do I add a picture in symfony2 from form to a database. I want to make a logo as a picture field and store project picture in database from form. How do I do this? Here is my form: <?php namespace Projects\ProjectsBundle\Form; use Symfony\Component\Form\AbstractType; use Symfony\Component\Form\FormBuilderInterface; use Symfony\Component\OptionsResolver\OptionsResolverInterface; class ProjectsType extends AbstractType { public function buildForm(FormBuilderInterface $builder, array $options) { $builder ->add('name') ->add('description') ->add('priority','choice', array( 'choices' => array('high' => 'high', 'low' => 'low', 'medium' => 'medium'))) ->add('logo') ->add('startedAt','datetime',array('label' => false,'data'=>new \DateTime(),'attr'=>array('style'=>'display:none;'))) ->add('completedOn','datetime',array('label' => false,'data'=>new \DateTime(),'attr'=>array('style'=>'display:none;'))) ->add('createdDatetime','datetime',array('label' => false,'data'=>new \DateTime(),'attr'=>array('style'=>'display:none;'))) ->add('updatedDatetime','datetime',array('label' => false,'data'=>new \DateTime(),'attr'=>array('style'=>'display:none;'))) ; } public function setDefaultOptions(OptionsResolverInterface $resolver) { $resolver->setDefaults(array( 'data_class' => 'Projects\ProjectsBundle\Entity\Projects' )); } public function getName() { return 'projects_projectsbundle_projectstype'; } } and here is my controller: public function createAction(Request $request) { $user = $this->get('security.context')->getToken()->getUser(); $userId = $user->getId(); $entity = new Projects(); $form = $this->createForm(new ProjectsType(), $entity); $form->bind($request); $entity->setCreatedBy($userId); $entity->setUpdatedBy($userId); $entity->setCompletedBy($userId); if ($form->isValid()) { $em = $this->getDoctrine()->getManager(); $em->persist($entity); $em->flush(); $_SESSION['projectid'] =$entity->getId(); if($request->isXmlHttpRequest()) { $response = new Response(); $output = array('success' => true, 'description' => $entity->getdescription(), 'id' => $entity->getId(), 'name' => $entity->getname(), 'priority' => $entity->getpriority(), 'logo' => $entity->getlogo(), 'startedat' => $entity->getstartedat(),'completedon' => $entity->getcompletedon(),'completedby' => $entity->getCompletedBy(), 'createdby' => $entity->getcreatedby(), 'updatedby' => $entity->getupdatedby(), 'createddatetime' => $entity->getcreateddatetime(), 'updateddatetime' => $entity->getupdateddatetime()); $response->headers->set('Content-Type', 'application/json'); $response->setContent(json_encode($output)); return $response; } return $this->redirect($this->generateUrl('projects_show', array('id' => $entity->getId()))); } return $this->render('ProjectsProjectsBundle:Projects:new.html.twig', array( 'entity' => $entity, 'form' => $form->createView(), )); }

  Read the article

• No Method Error in Ruby

  - by JayG

  Hi, I currently have a Rails Apps that lets users drag and drop certain elements of the webpage and updates the application based on the users choice. This is done with the help of the Rails helpers and AJAX. However I keep running into a "NoMethodError" in Ruby. NoMethodError in ProjectsController#member_change undefined method `symbolize_keys' for nil:NilClass Here is the method that is being called. My trace says that error is occurring in this line: before = u.functions_for(r.authorizable_id) u.roles << r unless u.roles.include? r u.save flag_changed = true after = u.functions_for(r.authorizable_id) And here is the function being called def member_change flag_changed = false params['u'] =~ /role_(\d+)_user_(\d+)/ drag_role_id = $1 user_id = $2 params['r'] =~ /role_(\d+)/ drop_role_id = $1 if u=User.find(user_id) if r=Role.find(drop_role_id) if drag_role_id.to_i !=0 and old_r=Role.find(drag_role_id) if drag_role_id == drop_role_id #fom A to A => nothing happen flash.now[:warning] = _('No Operation...') elsif r.authorizable_id == old_r.authorizable_id #the same project? old_r.users.delete(u) unless old_r.valid? flash.now[:warning] = _('Group "Admin" CAN NOT be EMPTY.') old_r.users << u #TODO: better recovery member_edit #if flag_changed render :action => :member_edit, :layout => 'module_with_flash' return end old_r.save r.users << u unless r.users.include? u r.save flag_changed = true before = u.functions_for(r.authorizable_id) after = u.functions_for(r.authorizable_id) added = after - before removed = before - after added.each do |f| ApplicationController::send_msg(:function,:create, {:function_name => f.name, :user_id => u.id, :project_id => r.authorizable_id }) end removed.each do |f| ApplicationController::send_msg(:function,:delete, {:function_name => f.name, :user_id => u.id, :project_id => r.authorizable_id }) end flash.now[:notice] = _( 'Move User to Group' ) + " #{ r.name }" else flash.now[:warning] = _('You can\'t move User between Groups that belong to different Projects.') end else before = u.functions_for(r.authorizable_id) u.roles << r unless u.roles.include? r u.save flag_changed = true after = u.functions_for(r.authorizable_id) added = after - before added.each do |f| ApplicationController::send_msg(:function,:create, {:function_name => f.name, :user_id => u.id, :project_id => r.authorizable_id }) end flash.now[:notice] = _( 'Add User into Group' ) + " #{ r.name }" end else flash.now[:warn] = _( 'Group doesn\'t exist!' ) + ": #{ r.name }" end else flash.now[:warning] = _( 'User doesn\'t exist!' ) + ": #{ u.login }" end member_edit #if flag_changed render :action => :member_edit, :layout => 'module_with_flash' end and the JavaScript used to call the function jQuery('#RemoveThisMember').droppable({accept:'.RolesUsersSelection', drop:function(ev,ui){ if (confirm("This will remove User from this Group, are you sure?")) {jQuery.ajax({data:'u=' + encodeURIComponent(jQuery(ui.draggable).attr('id')), success:function(request){jQuery('#module_content').html(request);}, type:'post', url:'/of/projects/11/member_delete'});} }, hoverClass:'ProjectRoleDropDelete_active'}) Any ideas? Thanks,

  Read the article

• XForms and multiple inputs for same model tag

  - by iHeartGreek

  Hi! I apologize ahead of time if I am not asking this properly.. it is hard to put into words what I am asking.. I have XForms model such as: <file> <criteria> <criterion></criterion> </criteria> </file> I want to have multiple input text boxes that create a new criterion tag. user interface such as: <xf:input ref="/file/criteria/criterion" model="select_data"> <xf:label>Select</xf:label> </xf:input> <xf:input ref="/file/criteria/criterion" model="select_data"> <xf:label>Select</xf:label> </xf:input> <xf:input ref="/file/criteria/criterion" model="select_data"> <xf:label>Select</xf:label> </xf:input> And I would like the XML output to look like this (once user has entered in info): <file> <criteria> <criterion>AAA</criterion> <criterion>BBB</criterion> <criterion>CCC</criterion> </criteria> </file> The way I have it doesn't work, as it sees the 3 input fields to be referring all to the same criterion tag. How do I differentiate? Thanks! I hope that made some sense! BEGIN FIRST EDIT Thanks for the responses for the basic text box! However, I now need to do this with a listbox. But for the life of me, I can't figure out how. I read somewhere to use with the xforms:select and deselect events.. but I didn't know where to place them, and the places I tried gave me very weird behaviour. I am currently implementing the following: <xf:select ref="instance('criteria_data')/criteria/criterion" selection="" appearance="compact" > <xf:label>Choose criteria</xf:label> <xf:itemset nodeset="instance('criteria_choices')/choice"> <xf:label ref="@label"></xf:label> <xf:value ref="."></xf:value> </xf:itemset> </xf:select> However when multiple choices are submitted, all selection values are inserted into the same node, separated by spaces. For example: If AAA and BBB and FFF were selected from listbox, it would result in the following XML: <criterion>AAA BBB FFF</criterion> How do I change my code to have each selection be in a separate node? i.e. I want it to look like this: <criterion>AAA</criterion> <criterion>BBB</criterion> <criterion>FFF</criterion> Thanks! END FIRST EDIT BEGIN SECOND EDIT: For the listboxes (ie xf:select appearance="compact") I ended up allowing the spaces to occur in the same node and then just transformed that xml using xsl to generate a properly formatted new xml doc (with separate individual nodes). Unfortunately, I did not find a less cumbersome solution by inserting them originally into separate nodes. The selected answer works very well for text boxes however, hence why I selected it as the answer. END SECOND EDIT

  Read the article

• HMTL5 Anti Aliasing Browser Disable

  - by Tappa Tappa

  I am forced to consider writing a library to handle the fundamental basics of drawing lines, thick lines, circles, squares etc. of an HTML5 canvas because I can't disable a feature embedded in the browser rendering of the core canvas algorithms. Am I forced to build the HTML5 Canvas rendering process from the ground up? If I am, who's in with me to do this? Who wants to change the world? Imagine a simple drawing application written in HTML5... you draw a shape... a closed shape like a rudimentary circle, free hand, more like an onion than a circle (well, that's what mine would look like!)... then imagine selecting a paint bucket icon and clicking inside that shape you drew and expecting it to be filled with a color of your choice. Imagine your surprise as you selected "Paint Bucket" and clicked in the middle of your shape and it filled your shape with color... BUT, not quite... HANG ON... this isn't right!!! On the inside of the edge of the shape you drew is a blur between the background color and your fill color and the edge color... the fill seems to be flawed. You wanted a straight forward "Paint Bucket" / "Fill"... you wanted to draw a shape and then fill it with a color... no fuss.... fill the whole damned inside of your shape with the color you choose. Your web browser has decided that when you draw the lines to define your shape they will be anti-aliased. If you draw a black line for your shape... well, the browser will draw grey pixels along the edges, in places... to make it look like a "better" line. Yeah, a "better" line that **s up the paint / flood fill process. How much does is cost to pay off the browser developers to expose a property to disable their anti-aliasing rendering? Disabling would save milliseconds for their rendering engine, surely! Bah, I really don't want to have to build my own canvas rendering engine using Bresenham line rendering algorithm... WHAT CAN BE DONE... HOW CAN THIS BE CHANGED!!!??? Do I need to start a petition aimed at the WC3???? Will you include your name if you are interested??? UPDATED function DrawLine(objContext, FromX, FromY, ToX, ToY) { var dx = Math.abs(ToX - FromX); var dy = Math.abs(ToY - FromY); var sx = (FromX < ToX) ? 1 : -1; var sy = (FromY < ToY) ? 1 : -1; var err = dx - dy; var CurX, CurY; CurX = FromX; CurY = FromY; while (true) { objContext.fillRect(CurX, CurY, objContext.lineWidth, objContext.lineWidth); if ((CurX == ToX) && (CurY == ToY)) break; var e2 = 2 * err; if (e2 > -dy) { err -= dy; CurX += sx; } if (e2 < dx) { err += dx; CurY += sy; } } }

  Read the article

• error_expected_primary expression before in. In functions

  - by user2975402

  Here is my code. I try to fix it and I always obtain the same error: expected primary expression before 'int'. in line 47, 55, 63, 80, 86. And I've already tried this program in small pieces before and it works. It doesn't marked that error. ` #include using namespace std; int add (int a, int b) { int r; r=a+b; return (r); } int ssub (int a, int b) { int r; r=a-b; return (r); } int mult(int a, int b) { int r; r=a*b; return (r); } int menu(int a, int b){ int r; char x; cout <<"What do you want to do: \na.Adding \n s. Substract \n m. Multiply. \n. e. Exit"<<endl; cin>>x; switch (x){ case 'a': cout << "Give a value for a"<<endl; cin>>a; cout <<"Give a value for b"<<endl; cin>>b; add (int a, int b); //aquí y en otras líneas me sale: expected primary expression before int. break; case 's': cout << "Give a value for a"<<endl; cin>>a; cout <<"Give a value for b"<<endl; cin>>b; ssub (int a, int b); break; case 'm': cout << "Give a value for a"<<endl; cin>>a; cout <<"Give a value for b"<<endl; cin>>b; mult (int a, int b); break; case 'e': x='e'; break; default: cout<<"Wrong choice. Run the program again and choose another letter"<<endl; break; } return r; } cout<<"The result is " << menu (int a, int b)<<endl; int main() { menu (int a, int b); return 0; } `

  Read the article

• R concentrating data frame

  - by user1631503

  I have a data frame like this >X_com Day_1 Day_2 Day_3 Day_4 Day_5 Day_6 Day_7 Day_8 Day_9 Day_10 1 0 0 0 0 0 0 0 0 0 1 2 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 4 0 0 0 0 0 0 0 0 0 0 5 0 0 0 0 0 0 0 0 0 0 6 0 0 0 0 0 0 0 0 0 0 7 0 0 0 0 0 0 0 0 0 0 8 0 0 0 0 0 0 0 0 0 0 I need to concentrate all the values into one column and add another column with "1;" So I did this > X_new=matrix(1,8,2) > X_new[1,]=paste(X_com[1,1], X_com[1,2],X_com[1,3],X_com [1,4],X_com[1,5],X_com[1,6],X_com[1,7],X_com[1,8],X_com [1,9],X_com[1,10], sep="") > X_new[2,]=paste(X_com[2,1], X_com[2,2],X_com[2,3],X_com [2,4],X_com[2,5],X_com[2,6],X_com[2,7],X_com[2,8],X_com [2,9],X_com[2,10], sep="") > X_new[3,]=paste(X_com[3,1], X_com[3,2],X_com[3,3],X_com [3,4],X_com[3,5],X_com[3,6],X_com[3,7],X_com[3,8],X_com [3,9],X_com[3,10], sep="") > X_new[4,]=paste(X_com[4,1], X_com[4,2],X_com[4,3],X_com [4,4],X_com[4,5],X_com[4,6],X_com[4,7],X_com[4,8],X_com [4,9],X_com[4,10], sep="") > X_new[5,]=paste(X_com[5,1], X_com[5,2],X_com[5,3],X_com [5,4],X_com[5,5],X_com[5,6],X_com[5,7],X_com[5,8],X_com [5,9],X_com[5,10], sep="") > X_new[6,]=paste(X_com[6,1], X_com[6,2],X_com[6,3],X_com [6,4],X_com[6,5],X_com[6,6],X_com[6,7],X_com[6,8],X_com [6,9],X_com[6,10], sep="") > X_new[7,]=paste(X_com[7,1], X_com[7,2],X_com[7,3],X_com [7,4],X_com[7,5],X_com[7,6],X_com[7,7],X_com[7,8],X_com [7,9],X_com[7,10], sep="") > X_new[8,]=paste(X_com[8,1], X_com[8,2],X_com[8,3],X_com [8,4],X_com[8,5],X_com[8,6],X_com[8,7],X_com[8,8],X_com [8,9],X_com[8,10], sep="") > X_new[1:8,2]="1;" > as.data.frame(X_new) V1 V2 1 0000000001 1; 2 0000000000 1; 3 0000000000 1; 4 0000000000 1; 5 0000000000 1; 6 0000000000 1; 7 0000000000 1; 8 0000000000 1; I believe there's definitely a faster way of achieving this but have no clue. The other problem is, I have over a thousand of data frame like this needs to be concentrated. I'm still learning how to loop these repetitive steps but is progressing quite slowly. If the original data frames were named uniquely, does that mean I have no choice but to work on each of them individually? Thank you in advance.

  Read the article

• How To Run XP Mode in VirtualBox on Windows 7 (sort of)

  - by Matthew Guay

  A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• How To Run XP Mode in VirtualBox on Windows 7 (sort of)

  - by Matthew Guay

  A few weeks ago we showed you how to run XP Mode on a Windows 7 computer without Hardware Virtualization using VMware. Some of you have been asking if it can be done in Virtual Box as well. The answer is “Yes!” and here we’ll show you how. Editor Update: Apparently there isn’t a way to activate XP Mode through VirtualBox using this method. You will however, be able to run it for 30 days. We have a new updated article on how to Install XP Mode with VirtualBox Using the VMLite Plugin.   Earlier we showed you how to run XP mode on windows 7 machines without hardware virtualization capability. Since then, a lot of you have been asking to a write up a tutorial about doing the same thing using VirtualBox.  This makes it another great way to run XP Mode if your computer does not have hardware virtualization.  Here we’ll see how to import the XP Mode from Windows 7 Professional, Enterprise, or Ultimate into VirtualBox so you can run XP in it for free. Note: You need to have Windows 7 Professional or above to use XP Mode in this manner. In our tests we were able to get it to run on Home Premium as well, but you’ll be breaking Windows 7 licensing agreements. Getting Started First, download and install XP Mode (link below).  There is no need to download Virtual PC if your computer cannot run it, so just download the XP Mode from the link on the left. Install XP mode; just follow the default prompts as usual. Now, download and install VirtualBox 3.1.2 or higher(link below).  Install as normal, and simply follow the default prompts. VirtualBox may notify you that your network connection will be reset during the installation.  Press Yes to continue. During the install, you may see several popups asking you if you wish to install device drivers for USB and Network interfaces.  Simply click install, as these are needed for VirtualBox to run correctly. Setup only took a couple minutes, and doesn’t require a reboot. Setup XP Mode in VirtualBox: First we need to copy the default XP Mode so VirtualBox will not affect the original copy.  Browse to C:\Program Files\Windows XP Mode, and copy the file “Windows XP Mode base.vhd”.  Paste it in another folder of your choice, such as your Documents folder. Once you’ve copied the file, right-click on it and click Properties. Uncheck the “Read-only” box in this dialog, and then click Ok. Now, in VirtualBox, click New to create a new virtual machine. Enter the name of your virtual machine, and make sure the operating system selected is Windows XP. Choose how much memory you want to allow the virtual machine to use.  VirtualBox’ default is 192 Mb ram, but for better performance you can select 256 or 512Mb. Now, select the hard drive for the virtual machine.  Select “Use existing hard disk”, then click the folder button to choose the XP Mode virtual drive. In this window, click Add, and then browse to find the copy of XP Mode you previously made. Make sure the correct virtual drive is selected, then press Select. After selecting the VHD your screen should look like the following then click Next. Verify the settings you made are correct. If not, you can go back and make any changes. When everything looks correct click Finish. Setup XP Mode Now, in VirtualBox, click start to run XP Mode. The Windows XP in this virtual drive is not fully setup yet, so you will have to go through the setup process.   If you didn’t uncheck the “Read-only” box in the VHD properties before, you may see the following error.  If you see it, go back and check the file to makes sure it is not read-only. When you click in the virtual machine, it will capture your mouse by default.  Simply press the right Ctrl key to release your mouse so you can go back to using Windows 7.  This will only be the case during the setup process; after the Guest Additions are installed, the mouse will seamlessly move between operating systems. Now, accept the license agreement in XP.   Choose your correct locale and keyboard settings. Enter a name for your virtual XP, and an administrative password. Check the date, time, and time zone settings, and adjust them if they are incorrect.  The time and date are usually correct, but the time zone often has to be corrected. XP will now automatically finish setting up your virtual machine, and then will automatically reboot. After rebooting, select your automatic update settings. You may see a prompt to check for drivers; simply press cancel, as all the drivers we need will be installed later with the Guest Additions. Your last settings will be finalized, and finally you will see your XP desktop in VirtualBox. Please note that XP Mode may not remain activated after importing it into VirtualBox. When you activate it, use the key that is located at C:\Program Files\Windows XP Mode\key.txt.  Note: During our tests we weren’t able to get the activation to go through. We are looking into the issue and will have a revised article showing the correct way to get XP Mode in VirutalBox working correctly soon.    Now we have one final thing to install – the VirtualBox Guest Additions.  In the VirtualBox window, click “Devices” and then select “Install Guest Additions”. This should automatically launch in XP; if it doesn’t, click Start, then My Computer, and finally double-click on the CD drive which should say VirtualBox Guest Additions. Simply install with the normal presets. You can select to install an experimental 3D graphics driver if you wish to try to run games in XP in VirtualBox; however, do note that this is not fully supported and is currently a test feature. You may see a prompt informing you that the drivers have not passed Logo testing; simply press “Continue Anyway” to proceed with the installation.   When installation has completed, you will be required to reboot your virtual machine. Now, you can move your mouse directly from Windows XP to Windows 7 without pressing Ctrl. Integrating with Windows 7 Once your virtual machine is rebooted, you can integrate it with your Windows 7 desktop.  In the VirtualBox window, click Machine and then select “Seamless Mode”.   In Seamless mode you’ll have the XP Start menu and taskbar sit on top of your Windows 7 Start and Taskbar. Here we see XP running on Virtual Box in Seamless Mode. We have the old XP WordPad sitting next to the new Windows 7 version of WordPad. Another view of everything running seamlessly together on the same Windows 7 desktop. Hover the pointer over the XP taskbar to pull up the Virtual Box menu items. You can exit out of Seamless Mode from the VirtualBox menu or using “Ctrl+L”. Then you go back to having it run separately on your desktop again. Conclusion Running XP Mode in a Virtual Machine is a great way to experience the feature on computers without Hardware Virtualization capabilities. If you prefer VMware Player, then you’ll want to check out our articles on how to run XP Mode on Windows 7 machines without Hardware Virtualization, and how to create an XP Mode for Windows 7 Home Premium and Vista. Download VirtualBox Download XP Mode Similar Articles Productive Geek Tips Install XP Mode with VirtualBox Using the VMLite PluginUsing Windows 7 or Vista Compatibility ModeMake Safari Stop Crashing Every 20 Seconds on Windows VistaForce Windows 7 / Vista to Boot Into Safe Mode Without Using the F8 KeyHow To Run Chrome OS in VirtualBox TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Enable Check Box Selection in Windows 7 OnlineOCR – Free OCR Service Betting on the Blind Side, a Vanity Fair article 30 Minimal Logo Designs that Say More with Less LEGO Digital Designer – Free Create a Personal Website Quickly using Flavors.me

  Read the article

• Making Sense of ASP.NET Paths

  - by Rick Strahl

  ASP.Net includes quite a plethora of properties to retrieve path information about the current request, control and application. There's a ton of information available about paths on the Request object, some of it appearing to overlap and some of it buried several levels down, and it can be confusing to find just the right path that you are looking for. To keep things straight I thought it a good idea to summarize the path options along with descriptions and example paths. I wrote a post about this a long time ago in 2004 and I find myself frequently going back to that page to quickly figure out which path I’m looking for in processing the current URL. Apparently a lot of people must be doing the same, because the original post is the second most visited even to this date on this blog to the tune of nearly 500 hits per day. So, I decided to update and expand a bit on the original post with a little more information and clarification based on the original comments. Request Object Paths Available Here's a list of the Path related properties on the Request object (and the Page object). Assume a path like http://www.west-wind.com/webstore/admin/paths.aspx for the paths below where webstore is the name of the virtual. .blackborder td { border-bottom: solid 1px silver; border-left: solid 1px silver; } Request Property Description and Value ApplicationPath Returns the web root-relative logical path to the virtual root of this app. /webstore/ PhysicalApplicationPath Returns local file system path of the virtual root for this app. c:\inetpub\wwwroot\webstore PhysicalPath Returns the local file system path to the current script or path. c:\inetpub\wwwroot\webstore\admin\paths.aspx Path FilePath CurrentExecutionFilePath All of these return the full root relative logical path to the script page including path and scriptname. CurrentExcecutionFilePath will return the ‘current’ request path after a Transfer/Execute call while FilePath will always return the original request’s path. /webstore/admin/paths.aspx AppRelativeCurrentExecutionFilePath Returns an ASP.NET root relative virtual path to the script or path for the current request. If in  a Transfer/Execute call the transferred Path is returned. ~/admin/paths.aspx PathInfo Returns any extra path following the script name. If no extra path is provided returns the root-relative path (returns text in red below). string.Empty if no PathInfo is available. /webstore/admin/paths.aspx/ExtraPathInfo RawUrl Returns the full root relative URL including querystring and extra path as a string. /webstore/admin/paths.aspx?sku=wwhelp40 Url Returns a fully qualified URL including querystring and extra path. Note this is a Uri instance rather than string. http://www.west-wind.com/webstore/admin/paths.aspx?sku=wwhelp40 UrlReferrer The fully qualified URL of the page that sent the request. This is also a Uri instance and this value is null if the page was directly accessed by typing into the address bar or using an HttpClient based Referrer client Http header. http://www.west-wind.com/webstore/default.aspx?Info Control.TemplateSourceDirectory Returns the logical path to the folder of the page, master or user control on which it is called. This is useful if you need to know the path only to a Page or control from within the control. For non-file controls this returns the Page path. /webstore/admin/ As you can see there’s a ton of information available there for each of the three common path formats: Physical Path is an OS type path that points to a path or file on disk. Logical Path is a Web path that is relative to the Web server’s root. It includes the virtual plus the application relative path. ~/ (Root-relative) Path is an ASP.NET specific path that includes ~/ to indicate the virtual root Web path. ASP.NET can convert virtual paths into either logical paths using Control.ResolveUrl(), or physical paths using Server.MapPath(). Root relative paths are useful for specifying portable URLs that don’t rely on relative directory structures and very useful from within control or component code. You should be able to get any necessary format from ASP.NET from just about any path or script using these mechanisms. ~/ Root Relative Paths and ResolveUrl() and ResolveClientUrl() ASP.NET supports root-relative virtual path syntax in most of its URL properties in Web Forms. So you can easily specify a root relative path in a control rather than a location relative path: <asp:Image runat="server" ID="imgHelp" ImageUrl="~/images/help.gif" /> ASP.NET internally resolves this URL by using ResolveUrl("~/images/help.gif") to arrive at the root-relative URL of /webstore/images/help.gif which uses the Request.ApplicationPath as the basepath to replace the ~. By convention any custom Web controls also should use ResolveUrl() on URL properties to provide the same functionality. In your own code you can use Page.ResolveUrl() or Control.ResolveUrl() to accomplish the same thing: string imgPath = this.ResolveUrl("~/images/help.gif"); imgHelp.ImageUrl = imgPath; Unfortunately ResolveUrl() is limited to WebForm pages, so if you’re in an HttpHandler or Module it’s not available. ASP.NET Mvc also has it’s own more generic version of ResolveUrl in Url.Decode: <script src="<%= Url.Content("~/scripts/new.js") %>" type="text/javascript"></script> which is part of the UrlHelper class. In ASP.NET MVC the above sort of syntax is actually even more crucial than in WebForms due to the fact that views are not referencing specific pages but rather are often path based which can lead to various variations on how a particular view is referenced. In a Module or Handler code Control.ResolveUrl() unfortunately is not available which in retrospect seems like an odd design choice – URL resolution really should happen on a Request basis not as part of the Page framework. Luckily you can also rely on the static VirtualPathUtility class: string path = VirtualPathUtility.ToAbsolute("~/admin/paths.aspx"); VirtualPathUtility also many other quite useful methods for dealing with paths and converting between the various kinds of paths supported. One thing to watch out for is that ToAbsolute() will throw an exception if a query string is provided and doesn’t work on fully qualified URLs. I wrote about this topic with a custom solution that works fully qualified URLs and query strings here (check comments for some interesting discussions too). Similar to ResolveUrl() is ResolveClientUrl() which creates a fully qualified HTTP path that includes the protocol and domain name. It’s rare that this full resolution is needed but can be useful in some scenarios. Mapping Virtual Paths to Physical Paths with Server.MapPath() If you need to map root relative or current folder relative URLs to physical URLs or you can use HttpContext.Current.Server.MapPath(). Inside of a Page you can do the following: string physicalPath = Server.MapPath("~/scripts/ww.jquery.js")); MapPath is pretty flexible and it understands both ASP.NET style virtual paths as well as plain relative paths, so the following also works. string physicalPath = Server.MapPath("scripts/silverlight.js"); as well as dot relative syntax: string physicalPath = Server.MapPath("../scripts/jquery.js"); Once you have the physical path you can perform standard System.IO Path and File operations on the file. Remember with physical paths and IO or copy operations you need to make sure you have permissions to access files and folders based on the Web server user account that is active (NETWORK SERVICE, ASPNET typically). Note the Server.MapPath will not map up beyond the virtual root of the application for security reasons. Server and Host Information Between these settings you can get all the information you may need to figure out where you are at and to build new Url if necessary. If you need to build a URL completely from scratch you can get access to information about the server you are accessing: Server Variable Function and Example SERVER_NAME The of the domain or IP Address wwww.west-wind.com or 127.0.0.1 SERVER_PORT The port that the request runs under. 80 SERVER_PORT_SECURE Determines whether https: was used. 0 or 1 APPL_MD_PATH ADSI DirectoryServices path to the virtual root directory. Note that LM typically doesn’t work for ADSI access so you should replace that with LOCALHOST or the machine’s NetBios name. /LM/W3SVC/1/ROOT/webstore Request.Url and Uri Parsing If you still need more control over the current request URL or  you need to create new URLs from an existing one, the current Request.Url Uri property offers a lot of control. Using the Uri class and UriBuilder makes it easy to retrieve parts of a URL and create new URLs based on existing URL. The UriBuilder class is the preferred way to create URLs – much preferable over creating URIs via string concatenation. Uri Property Function Scheme The URL scheme or protocol prefix. http or https Port The port if specifically specified. DnsSafeHost The domain name or local host NetBios machine name www.west-wind.com or rasnote LocalPath The full path of the URL including script name and extra PathInfo. /webstore/admin/paths.aspx Query The query string if any ?id=1 The Uri class itself is great for retrieving Uri parts, but most of the properties are read only if you need to modify a URL in order to change it you can use the UriBuilder class to load up an existing URL and modify it to create a new one. Here are a few common operations I’ve needed to do to get specific URLs: Convert the Request URL to an SSL/HTTPS link For example to take the current request URL and converted  it to a secure URL can be done like this: UriBuilder build = new UriBuilder(Request.Url); build.Scheme = "https"; build.Port = -1; // don't inject port Uri newUri = build.Uri; string newUrl = build.ToString(); Retrieve the fully qualified URL without a QueryString AFAIK, there’s no native routine to retrieve the current request URL without the query string. It’s easy to do with UriBuilder however: UriBuilder builder = newUriBuilder(Request.Url); builder.Query = ""; stringlogicalPathWithoutQuery = builder.ToString(); What else? I took a look through the old post’s comments and addressed as many of the questions and comments that came up in there. With a few small and silly exceptions this update post handles most of these. But I’m sure there are a more things that go in here. What else would be useful to put onto this post so it serves as a nice all in one place to go for path references? If you think of something leave a comment and I’ll try to update the post with it in the future.© Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET  

  Read the article

• Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

  - by smisner

  Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system.The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me.At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach.Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements.My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work.Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way.DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal.Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info:You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client.You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features.I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically.When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions:On the Choose the installation you want page of the installation wizard, I chose Server Farm.On the Server Type page, I chose Complete.At the end of the installation, I did not run the configuration wizard.Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end.It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective.I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed:Install SQL Server 2008 R2 to get a database engine instance installed.Run the SharePoint configuration wizard to set up the SharePoint databases.In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization.Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment.I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon.Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment.I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Mapping UrlEncoded POST Values in ASP.NET Web API

  - by Rick Strahl

  If there's one thing that's a bit unexpected in ASP.NET Web API, it's the limited support for mapping url encoded POST data values to simple parameters of ApiController methods. When I first looked at this I thought I was doing something wrong, because it seems mighty odd that you can bind query string values to parameters by name, but can't bind POST values to parameters in the same way. To demonstrate here's a simple example. If you have a Web API method like this:[HttpGet] public HttpResponseMessage Authenticate(string username, string password) { …} and then hit with a URL like this: http://localhost:88/samples/authenticate?Username=ricks&Password=sekrit it works just fine. The query string values are mapped to the username and password parameters of our API method. But if you now change the method to work with [HttpPost] instead like this:[HttpPost] public HttpResponseMessage Authenticate(string username, string password) { …} and hit it with a POST HTTP Request like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Content-type: application/x-www-form-urlencoded Content-Length: 30 Username=ricks&Password=sekrit you'll find that while the request works, it doesn't actually receive the two string parameters. The username and password parameters are null and so the method is definitely going to fail. When I mentioned this over Twitter a few days ago I got a lot of responses back of why I'd want to do this in the first place - after all HTML Form submissions are the domain of MVC and not WebAPI which is a valid point. However, the more common use case is using POST Variables with AJAX calls. The following is quite common for passing simple values:$.post(url,{ Username: "Rick", Password: "sekrit" },function(result) {…}); but alas that doesn't work. How ASP.NET Web API handles Content Bodies Web API supports parsing content data in a variety of ways, but it does not deal with multiple posted content values. In effect you can only post a single content value to a Web API Action method. That one parameter can be very complex and you can bind it in a variety of ways, but ultimately you're tied to a single POST content value in your parameter definition. While it's possible to support multiple parameters on a POST/PUT operation, only one parameter can be mapped to the actual content - the rest have to be mapped to route values or the query string. Web API treats the whole request body as one big chunk of data that is sent to a Media Type Formatter that's responsible for de-serializing the content into whatever value the method requires. The restriction comes from async nature of Web API where the request data is read only once inside of the formatter that retrieves and deserializes it. Because it's read once, checking for content (like individual POST variables) first is not possible. However, Web API does provide a couple of ways to access the form POST data: Model Binding - object property mapping to bind POST values FormDataCollection - collection of POST keys/values ModelBinding POST Values - Binding POST data to Object Properties The recommended way to handle POST values in Web API is to use Model Binding, which maps individual urlencoded POST values to properties of a model object provided as the parameter. Model binding requires a single object as input to be bound to the POST data, with each POST key that matches a property name (including nested properties like Address.Street) being mapped and updated including automatic type conversion of simple types. This is a very nice feature - and a familiar one from MVC - that makes it very easy to have model objects mapped directly from inbound data. The obvious drawback with Model Binding is that you need a model for it to work: You have to provide a strongly typed object that can receive the data and this object has to map the inbound data. To rewrite the example above to use ModelBinding I have to create a class maps the properties that I need as parameters:public class LoginData { public string Username { get; set; } public string Password { get; set; } } and then accept the data like this in the API method:[HttpPost] public HttpResponseMessage Authenticate(LoginData login) { string username = login.Username; string password = login.Password; … } This works fine mapping the POST values to the properties of the login object. As a side benefit of this method definition, the method now also allows posting of JSON or XML to the same endpoint. If I change my request to send JSON like this: POST http://localhost:88/samples/authenticate HTTP/1.1 Host: localhost:88 Accept: application/jsonContent-type: application/json Content-Length: 40 {"Username":"ricks","Password":"sekrit"} it works as well and transparently, courtesy of the nice Content Negotiation features of Web API. There's nothing wrong with using Model binding and in fact it's a common practice to use (view) model object for inputs coming back from the client and mapping them into these models. But it can be  kind of a hassle if you have AJAX applications with a ton of backend hits, especially if many methods are very atomic and focused and don't effectively require a model or view. Not always do you have to pass structured data, but sometimes there are just a couple of simple response values that need to be sent back. If all you need is to pass a couple operational parameters, creating a view model object just for parameter purposes seems like overkill. Maybe you can use the query string instead (if that makes sense), but if you can't then you can often end up with a plethora of 'message objects' that serve no further  purpose than to make Model Binding work. Note that you can accept multiple parameters with ModelBinding so the following would still work:[HttpPost] public HttpResponseMessage Authenticate(LoginData login, string loginDomain) but only the object will be bound to POST data. As long as loginDomain comes from the querystring or route data this will work. Collecting POST values with FormDataCollection Another more dynamic approach to handle POST values is to collect POST data into a FormDataCollection. FormDataCollection is a very basic key/value collection (like FormCollection in MVC and Request.Form in ASP.NET in general) and then read the values out individually by querying each. [HttpPost] public HttpResponseMessage Authenticate(FormDataCollection form) { var username = form.Get("Username"); var password = form.Get("Password"); …} The downside to this approach is that it's not strongly typed, you have to handle type conversions on non-string parameters, and it gets a bit more complicated to test such as setup as you have to seed a FormDataCollection with data. On the other hand it's flexible and easy to use and especially with string parameters is easy to deal with. It's also dynamic, so if the client sends you a variety of combinations of values on which you make operating decisions, this is much easier to work with than a strongly typed object that would have to account for all possible values up front. The downside is that the code looks old school and isn't as self-documenting as a parameter list or object parameter would be. Nevertheless it's totally functionality and a viable choice for collecting POST values. What about [FromBody]? Web API also has a [FromBody] attribute that can be assigned to parameters. If you have multiple parameters on a Web API method signature you can use [FromBody] to specify which one will be parsed from the POST content. Unfortunately it's not terribly useful as it only returns content in raw format and requires a totally non-standard format ("=content") to specify your content. For more info in how FromBody works and several related issues to how POST data is mapped, you can check out Mike Stalls post: How WebAPI does Parameter Binding Not really sure where the Web API team thought [FromBody] would really be a good fit other than a down and dirty way to send a full string buffer. Extending Web API to make multiple POST Vars work? Don't think so Clearly there's no native support for multiple POST variables being mapped to parameters, which is a bit of a bummer. I know in my own work on one project my customer actually found this to be a real sticking point in their AJAX backend work, and we ended up not using Web API and using MVC JSON features instead. That's kind of sad because Web API is supposed to be the proper solution for AJAX backends. With all of ASP.NET Web API's extensibility you'd think there would be some way to build this functionality on our own, but after spending a bit of time digging and asking some of the experts from the team and Web API community I didn't hear anything that even suggests that this is possible. From what I could find I'd say it's not possible primarily because Web API's Routing engine does not account for the POST variable mapping. This means [HttpPost] methods with url encoded POST buffers are not mapped to the parameters of the endpoint, and so the routes would never even trigger a request that could be intercepted. Once the routing doesn't work there's not much that can be done. If somebody has an idea how this could be accomplished I would love to hear about it. Do we really need multi-value POST mapping? I think that that POST value mapping is a feature that one would expect of any API tool to have. If you look at common APIs out there like Flicker and Google Maps etc. they all work with POST data. POST data is very prominent much more so than JSON inputs and so supporting as many options that enable would seem to be crucial. All that aside, Web API does provide very nice features with Model Binding that allows you to capture many POST variables easily enough, and logistically this will let you build whatever you need with POST data of all shapes as long as you map objects. But having to have an object for every operation that receives a data input is going to take its toll in heavy AJAX applications, with a lot of types created that do nothing more than act as parameter containers. I also think that POST variable mapping is an expected behavior and Web APIs non-support will likely result in many, many questions like this one: How do I bind a simple POST value in ASP.NET WebAPI RC? with no clear answer to this question. I hope for V.next of WebAPI Microsoft will consider this a feature that's worth adding. Related Articles Passing multiple POST parameters to Web API Controller Methods Mike Stall's post: How Web API does Parameter Binding Where does ASP.NET Web API Fit?© Rick Strahl, West Wind Technologies, 2005-2012Posted in Web Api   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Sunday, February 28, 2010

  CodePlex Daily Summary for Sunday, February 28, 2010New ProjectsESB Toolkit Extensions: ESB Extensions is a solution containing multiple .Net Projects and artifacts: Unit Tests, Itineraries, Business Rules, Binding Files, and C# Class ...Event-Based Components Binder: The Binder automatically connects output-pins to input-pins of Event-Based Components based on message type information and naming conventions. ...Haze Anti-Virus: Haze Anti-Virus is a anti virus written in C# and has features such a realtime process watching and a Process Blacklist, and is able to download Da...latex2mathml: A .NET 2.0 library written in C# which allows the conversion of LaTeX documents to XHTML+MathML format. A stand-alone converter is included. The li...Project Lyrebird: Project lyrebird is a attempt to create a all-purpose media player. It is designed to be simple, yet powerful. Its written in C#QueryToGrid Module for DotNetNuke®: This is a module that allows you to execute and display the results of T-SQL queries in DotNetNuke using your choice of AJAX grids.Reusable Library Demo: A demonstration of reusable abstractions for enterprise application developerSharePoint 2010 Conference Samples: This project contains source code from various SharePoint 2010 conferences where Scot Hillier presented.Silverlight Photo Blogger: Silverlight Photo Blogger gives you the tools you need to capture and blog about your travels in a rich and interactive web experience. Enjoy som...SMTP Test: Several times we are faced with applications that send email, the SMTP Tester principle objective is to test various possibilities of sendingSolution Tools - tools for Visual Studio solutions and projects: Solution Tools are a collection of tools that you can use with your Visual Studio Solutions and projects.New ReleasesAgile Poker Cards for Windows Mobile: Agile Poker Cards v1.1.0.0: Agile Poker Cards v1.1.0.0 Use this application to display poker cards in a planning session on a Windows Mobile device. Release notes Added new ...BuildTools - Toolset for automated builds: BuildTools 2.0 Feb 2010 Milestone: The Feb 2010 Milestone release is a complete rewrite of the old codebase in Visual Studio 2010 RC. It features MSBuild tasks for generating build v...Composure: NHibernate-Trunk-2010-02-25-VS2010.NET4 Alpha1: Recent NHibernate-Trunk conversion for Visual Studio 2010 Beta2 against .NET 4.0. Although all of the tests pass (other than the "Ignored"), this ...Employee Scheduler: Employee Scheduler 2.4: Extract the files to a directory and run Lab Hours.exe. Add an employee. Double click an employee to modify their times. Please contact me through ...ESB Toolkit Extensions: Tellago BizTalk ESB 2.0 Toolkit Extensions: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...Haze Anti-Virus: Haze Anti-Virus Binary v1.0.3: This is the Compiled version of Haze Anti-Virus, please let me know about any bugs, thanks Please Note that Database updating is currently not avai...Haze Anti-Virus: Haze Anti-Virus Source v1.0.3: This is the source for Haze Anti-VirusHOG Project: HOG Visual Studio Template: This is Visual Studio HOG Template. Created by the great tool: Solution FactoryHOG Project: Template user guide: HOW TOiTuner - The iTunes Companion: iTuner 1.1.3711: Two new features are available: the Automated Librarian and Playlist Exporter. The iTuner Automated Librarian automatically cleans the iTunes libr...johanleino.codeplex.com: SilverlightMultiLevelNavigationExample: The source code for SilverlightMultiLevelNavigationExample (VS 2010)MDownloader: MDownloader-0.15.3.56128: Fixed filefactory provider implementation after site changes.MiniTwitter: 1.09: MiniTwitter 1.09 更新内容 変更 スクロール位置がトップ以外の時は自動更新や発言時に位置を保持するように変更 タブ毎にスクロール位置が変わらないように変更 URL に ? や ! が含まれている時は短縮 URL に変換するように変更NMock3: NMock3 - Beta 4, .NET 3.5: This release includes the most current version of the NMock2 project code from Source Forge. Please start providing feedback on the tutorials. The...QueryUnit: QueryUnitPOC v. 0.0.0.7: - This version fixes problems related to the fact that in previous releases you had to specify expected values using locale-specific formats. Now e...RapidWebDev - .NET Enterprise Software Development Infrastructure: RapidWebDev 1.51: This is a hot-fix version for 1.5 which is added a new restful web service for concrete data and fixed some major bugs. The change list is as follo...Rawr: Rawr 2.3.11: - Load from Armory code cleaned up. - Tiny Abomination in a Jar's proc how now been more accurately modeled. - You should now be able to reload...Resharper Settings Manager: RSM v1.2: Changes Added Default Settings File option. The selected settings file will be loaded automatically for solutions with no settings sharing. Added...Reusable Library Demo: Reusable Library Demo v1.0.0: A demonstration of reusable abstractions for enterprise application developerRounded Corners / DIV Container: MJC RoundedDiv 3.2: This is the first public release on Codeplex.com. Versions previous to 3.2 were created before this control was made available on Codeplex.com.SharePoint 2010 Conference Samples: Samples: Download the samples from the conferencesSharePoint Outlook Connector: Version 1.2.2.8: Saving email message as list item and attachments as attachment of the list item functionality has been addedSharePoint URL Ping Tool: Url Ping Tool Solution: A solution that contain one fram fature that will add a link under Site Administration section in the Site Settings page.SMTP Test: Fist SMTP Tester: First ReleaseSolution Tools - tools for Visual Studio solutions and projects: SolutionTools binary: Initial release of the tool. Turns out, this project was just a big waste of effort - use Project Linker instead!Solution Tools - tools for Visual Studio solutions and projects: SolutionTools source - don't use this tool: Initial release of the tool. Turns out, this project was just a big waste of effort - use Project Linker instead! Anyway, here's the source code...Spark View Engine: Spark v1.1 RC1: Overview This build is a preview of v1.1. Among other changes it provides support for ASP.NET MVC 2 RC2. Spark v1.1 release will be created soon ...Sprite Sheet Packer: 2.0 Release: I'm calling this a full new release because I can. Refactored all of the build logic to sspack.exe. This allows you to run this from the command l...SPSF SharePoint Software Factory: SPSF SharePoint Software Factory 2.4.3: New features: WSPBuilder support, Simple Application now with optional multilanguage support, Extending deployment skript for large deployments Fix...TortoiseHg: Beta for TortoiseHg 1.0 (0.9.31201): Beta for TortoiseHg 1.0 (0.9.31201) Please backup your user Mercurial.ini file and then uninstall any 0.9.X release before installing Use the x86...UI Compiler .NET - JavaScript compiler/minifier built on Google Closure Compiler: UI Compiler .NET 1.5 Beta: UI Compiler .NET does not include Java. To be able to run Google Closure Compiler locally you must make sure that Java 6 is installed. If Java 6 (o...VCC: Latest build, v2.1.30227.0: Automatic drop of latest buildVisual Studio DSite: File Encryption and Decryption (Visual Basic 2008): This program will create an encrypted copy of the file specified. Also decrypt the file specified. This program contains the source code but if yo...Visual Studio DSite: Visual C++ 2008 CLR Console Application Random Int: This source code includes an example of generating a random integer between the numbers 1-100.Weather Forecast Control: MJC MyWeather 2.2: This is the first public release on Codeplex.com. Versions previous to 2.2 were created before this control was made available on Codeplex.com.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETDotNetNuke® Community EditionBlogEngine.NETMost Active ProjectsDinnerNow.netRawrBlogEngine.NETMapWindow GISSLARToolkit - Silverlight Augmented Reality ToolkitCommon Context Adapterspatterns & practices – Enterprise LibrarySharpMap - Geospatial Application Framework for the CLRNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRapid Entity Framework. (ORM). CTP 2

  Read the article

• CodePlex Daily Summary for Tuesday, March 02, 2010

  CodePlex Daily Summary for Tuesday, March 02, 2010New ProjectsAcceptance Test Excel Addin: Acceptance Test Excel Addin is a tool to author, execute and analyze acceptance tests in Excel. The tester write tests using Given-When-Then (Gherk...Adrastus: Related to manage Issue/Item of any type. To be defined later TBDAn opportunity of upgrading Linux operating system: Want to add a new software in Linux operating system? Here is an opportunity. UFS (User Friendly Scheduler) has been designed to make the operating...AspNetPager: AspNetPager is a free custom paging control for ASP.NET web form application. It's one of the most popular ASP.NET third party controls used by chi...AzureRunMe: Run Java, Ruby, Python, [insert language of your choice] applications in Windows Azure. You provide a self contained ZIP file with a runme.bat f...DiffPlex - a .NET Diff Generator: DiffPlex is a combination of a .NET Diffing Library with both a Silverlight and HTML diff viewer.GPA WebClient: GPA project web client.Maintenance Service: A lot of projects need to have a windows service that execute different tasks. If am tired of creating the same service for all this project, so He...Marager Component Framework: Marager Component Framework (mcf)Pod Thrower: An application that gives a simple way to create podcast rss feeds from local computer folders.Rapidshare Episode Downloader: Rapidshare Episode Downloader is a software that enables you (yes, you!) to organize your many episodes of different TV shows in a nice list, prese...Resxus - Total .net string resource management tool: RESXUS is a resource file management tool which is being created under my job-experience of managing multilingual resx files. The first goal of th...SLFX: SLFXTheWhiteAmbit: Hybrid Scanline-Raytracing Engine. VisitorPattern based Scenegraph written in C++. DirectX9 or DirectX10 rendering is used for PrimaryRays and CUDA...TSqlMigrations: Yet another migrations platform right? This is purely sql based (tsql as it is only for Sql Server at this time). This tool is meant to help mana...WAFFLE: Windows Authentication Functional Framework (LE): WAFFLE - Windows Authentication Functional Framework (Light Edition) is a .NET library with a COM interface and a Java bridge that provides a worki...web lib api: This project aim, to pull together the major, web api/webservices for each relervant categorie.WSDLGenerator: A tool to generate a WSDL file from a c# dll which contains one more Microsoft WebServices. The project is build using VS2010RC and uses .net Fram...XNA Re-usable UI Components: The aim of this project is to create a re-usable set of UI game components helping reduce production time for your game. More information can be...YUI Compressor Custom Tool for Visual Studio: This EXTREMELY simple custom tool is used to automatically generate a *.min.css file from your existing code on save. It is merely a packaged versi...New ReleasesAcceptance Test Excel Addin: 1.0.0.0: How to Use Extract AcceptanceTestExcelAddIn-1.0.0.0.zip Run setup.exe Extract PasswordSample.zip Open Excel, your will see a new tab, "QA To...An opportunity of upgrading Linux operating system: UFS: The software provided by me is just a basic one that will run in the terminal through gcc compiler. The developers are therefore requested to make ...AspNetPager: Demo project: AspNetPager version 7.3.2 demo web site projectBusiness Framework: Formula Samples: A sample demonstrating textual language - Formula. It can be used is many business scenarios allowing end-user to configure or interact with the sy...Deblector: Deblector 1.1: This build fixes compatibility with .NET Reflector 6.Desktop Dimmer: March 2010: First release, March 2010EasyDump: EasyDump 1.0.1: Easy Dump 1.0.1 fix duplicate output when execute twiceExtensia: Extensia: Extensia is a very large list of extension methods and a few helper types. Many methods have practical utility (e.g. console parsing) whilst some ...Fluent Assertions: Fluent Assertions release 1.0: The first release of the Fluent Assertions. It contains assertions for the most common types and has several extension points.FolderSize: FolderSize.Win32.1.0.6.0: FolderSize.Win32.1.0.6.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...GamerShots.com Screenshot Capture: GamerShots.com Screenshot Capture: Windows Form application written in C# ASP.Net. Allows the user to capture a screen by pressing the "Print Scrn" key or by user input. Then uses ...Jet Login Tool (JetLoginTool): Stopped - 1.5.3713.17328: Fixed: Engine will now actually stop when the "Stop" button is hitJolt Environment - RuneScape Emulator: Jolt Environment 1.0.6000 GOLD: Features since 1.0.3200: - Account Creation via client - Character Saving/Loading (via MySQL serialization) - Ground Objects - Ground Items (with m...jQuery Library for SharePoint Web Services: SPServices 0.5.2: NOTE: While I work on new releases, I post alpha versions. Usually the alpha versions are here to address a particular need. I DO NOT recommend us...LINQ to XSD: 1.0.0: The LINQ to XSD technology provides .NET developers with support for typed XML programming. LINQ to XSD contributes to the LINQ project (.NET Langu...Maintenance Service: Alpha Release: Alpha Release of the SoftwareMDownloader: MDownloader-0.15.5.56206: Fixed many gathered bugs;MDownloader: MDownloader-0.15.6.56217: Fixed retrieving hotfile data using registered accounts.MRDS Services for HiTechnic: HiTechnic Controllers: The HiTechnic Controllers package contains services for MRDS that work with the LEGO NXT and TETRIX Servo and Motor Controllers. Initial ReleaseCo...Open NFe: DANFE 1.9.2: Correções do DANFE que serão incluídas na versão 1.9.2PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT: PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT-2.4: While testing a standard software parts kit library for strict portability, The following error condition occurred when using the Windows version ...Rapidshare Episode Downloader: RED 0.8: This is an almost fully working version of the software. What DOESN'T work: Showing the list of rapidshare search results (but query is being made...Reusable Library: V1.0.4: A collection of reusable abstractions for enterprise application developer.SharePoint LogViewer: SharePointLogViewer 1.5.1: Follwoing bugs are fixed Bookmarks deleted on refresh/reload Bookmarks not properly navigated on filtered list. Disabled toolbar buttons did n...SharePoint Taxonomy Extensions: SharePoint Taxonomy Extensions 1.1-1: - Some bugfixes - Possibility to switch between alphanummeric und manual sortingSilverSynth - Digital Audio Synthesis for Silverlight: SilverSynth 1.1: SilverSynth 1.1 is a zip file of the source code and includes an updated version of the demo application including presets.SQL Server Reporting Services MSBuild Tasks: Release 1.1.14669: New Features New Task added for Integrated and Native mode: DeleteReportUser Task ReportUserExists TaskTellago DevLabs: BizTalk Data Services v0.2: This release is the first version of the BizTalk Data Services API, a RESTful API for BizTalk Server based on the Open Data (OData) Protocol. The ...VCC: Latest build, v2.1.30301.0: Automatic drop of latest buildWAFFLE: Windows Authentication Functional Framework (LE): 1.2: Build 1.2.4217.0, initial open-source release. - Account lookup locally and in Active Directory. - Enumerating Active Directory domains. - Returns...Watermarker: 0.87: 01.03.2010: • FIXED: some stability fixes • ADDED: ability to choose any number of pictures and folder to save them after the operation completesWSDLGenerator: WSDLGenerator 0.0.0.1: Initial versionXNA Re-usable UI Components: Re-usable Game Components V1.0: First public release of the source codeYUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool with Installer v0.1a: Initial release with alpha installer - documentation to follow.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETImage Resizer Powertoy Clone for WindowsMost Active ProjectsRawrBlogEngine.NETMapWindow GISpatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesSharpMap - Geospatial Application Framework for the CLRRapid Entity Framework (ORM). CTP 2DiffPlex - a .NET Diff GeneratorMDT Web FrontEndWPF Dialogs

  Read the article

• Day 2 - Game Design Documentation

  - by dapostolov

  So yesterday I didn't cut any code for my game but I was able to do a tiny bit of research on the XNA Game Development Technology and the communities out there and do you know what? I feel I'm a bit closer to my goal. The bad news is today I didn't cut code either. However, not all is lost because I wanted to get my ideas on paper and today I just did that.  Today, I began to jot down notes about the game and how I felt the visual elements would interact with each other. Unlike my workplace, my personal level of documentation is nothing more than a task list or a mind map of my ideas; it helps me streamline my solutions quiet effectively and circumvent the long process of articulating each thought to the n-th degree. I truly dislike documentation (because I have an extremely hard time articulating my thought and solutions); however, because I tend to do a really good job with documentation I tend to get stuck writing the buggers. But as a generalist remark: 'No Developer likes documentation.' For now let's stick with my basic notes and call this post a living document. Here are my notes, fresh, from after watching the new first episode of Merlin second season! Actually, a quick recommendation to anyone who is reading this (if anyone is): I truly recommend you envelope yourself in the medium or task you're trying to tackle. Be one with moment and feel it! For instance: Are you writing a fantasy script / game? What would the music of the genre sound like? For me the Conan the Barbarian soundtrack by Basil Poledouris is frackin awesome. There are many other good CD's out there, which I listen to (some who even use medival instruments, but Conan I keep returning to. It's a creative trigger for me. Ask yourself what would the imagery look like? Time to surf google for artist renditions of fantasy! What would the game feel like? Start playing some of your favorite games that inspire you, be wary though, have some self control and don't let it absorb your time. Anyhow, onto the documentation... Screens, Scenes, and Sprites. Oh My! (groan...) The first thing that came to mind were the screens, I thought the following would suffice: Menu Screen Character Customisation Screen Loading Screen? Battle Ground The Menu Screen Ok. So, the thought here is when the game loads a huge title is displayed: Wizard Wars. The player is prompted with 3 menu items: 1 Player Game, 2 Player Game, and Exit. Since I'm targetting the PC platform, as a non-networked game to start, I picture myself running my mouse over each menu option and the visual element of the menu item changes, along with a sound to indicate that I am over a curent menu item. And as I move my mouse away, it changes back, and possibly an exit mouse sound. Maybe on the screen somewhere is a brazier alit with a magical tome open right beside it, OR, maybe the tome is the menu! I hear the menu music as mellow, not obtrusive or piercing. On a menu item select, a confirmation sound bellows to indicate the players selection. The Esc key will always return me to the previous screens or desktop. The menu screen must feel...dark, like a really important ritual is about to happen and thus the music should build up. 1 Player Game - > Customize Character(s) 2 Player Game - > Customize Character(s) Exit - > Back to Windows Notes: So the first thing I pick up here are a couple things: First and foremost, my artistic abilities suck crap, so I may have to hire an artist (now that i've said that, lets get techy) graphical objects will be positioned within a scene on each screen / window. Menu items will be represented grapically, possibly animated, and have sound / animation effects triggered by user input or a time line. I have an animated scene involving a brazier or fire on a stick IF I was to move this game to the xbox, I'd have to track which menu item is currently selected (unless I do a mouse pointer type thing.) WindowObject has a scene A Scene has many GameObjects GameObject has a position graphic or animation MenuObject is a GameObject which has a mouse in, mouse out, and click event which either does something graphically (animation), does something with sound, or moves to another screen.  Character Customisation Screen With either the 1 or 2 player option selected, both selections will come to this screen; a wizard requires a name, powers, and vestements of course! Player one will configure his character first and then player two. I considered a split screen for PC but to have two people fighting over a keyboard would probably suck. For XBox, a split screen could work; maybe when I get into the networking portion (phase 2 blog?) of this game I will remove the 2 player option for PC and provide only multiplayer and I will leave 2 player for xbox...hmm... Anyhow...I picture the creation process as follows: Name: (textbox / keyboard entry) - for xbox, this would have to be different. Robe Color: (color box, or something) Stats: Speed, Oomph, and Health. (as sliders) 1 as minimum and 10 as maximum. Ok, Back, and Cancel buttons / options. Each stat has a benefit which are listed below. The idea is the player decides if he wants his wizard to run fast, be a tank and ... hit with a purse.Regardless, the player will have a pool of 12 points to use. Ideally, A balanced wizard will have 5 in each attribute. Spells? The only spell of choice is a ball of fire which comes without question. The music and screen should still feel like a ritual. The Character Speed Basically, how fast your character moves and casts. Oomph (Best Monster Truck Voice): PURE POWAH!!! The damage output of your fireball. Health How much damage you can take. Notes: I realise the game dynamics may sound uninteresting at the moment; but I think after a couple releases, we could have some other grand ideas such as: saved profiles, gold to upgrade arsenal of spells, talents, etc...but for now...a vanilla fireball thrower mage will suffice for this experiment. OK. So... a MenuObject  may need to be loosely coupled to allow future items such as networking? may be a button? a CharacterObject has a name speed oomph health and a funky robe color. cap on the three stats (1-10) an arsenal of 1 spell (possibly could expand this) The Loading Screen As is. The Battleground Screen For now, I'm keeping the screen as max resolution for the PC. The screen isn't going to move or even be a split screen. I'm not aiming high here because I want to see what level of change is involved when new features / concepts are added to game content. I'm interested to find out if we could apply techniques such as MVC or MVVM to this type of development or is it too tightly coupled? This reminds me when when my best friend and I were brainstorming our game idea (this is going back a while...1994, 6?) and he cringed at the thought of bringing business technology into games, especially when I suggested a database to store character information and COM / DCOM as the medium, but it seems I wasn't far off (reflecting); just like his implementation of a xml "config file" for dynamic direct-x menus back before .net in 1999...anyhow...i digress... The Battle One screen, two characters lobing balls of fire at each other...It doesn't get better than that. Every so often a scroll appears...and the fireballs bounce off walls, or the wizard has rapid fire, or even scrolls of healing! The scroll options are endless. Two bars at the top, each the color of the wizard (with their name beside the bar) indicate how much health they have. Possibly the appearance of the scrolls means the battle is taking too long? I'm thinking 1 player controls: up, down, left, right and space to fire the button. Or even possibly, mouse click and shift - mouse button to fire a spell in the direction they are facing. Two player controls: a, s, d, f and space AND arrows (up, down, left, right) and Del key or Crtl. The game ends when a player has 0 health and a dialog box appears asking for a rematch / reconfigure / exit. Health goes down when a fireball (friendly or not), connects with a wizard. When a wizard connects with a scroll, a countdown clock / icon appears near the health bar and the wizard begins to glow. For the most part, a wizard can have only scroll 1 effect on him at a time. Notes: Ok, there's alot to cover here. a CharacterObject is a GameObject it travels at a set velocity it travels in a direction it has sounds (walking, running, casting, impact, dying, laughing, whistling, other?) it has animations (walking, running, casting, impact, dying, laughing, idle, other?) it has a lifespan (determined by health) it is alive or dead it has a position a ScrollObject is a GameObject it carries a transferance of points "damage" (or healing, bad scroll effect?) (determinde by caster) it carries a transferance of "other" it is stationary it has a sound on impact it has a stationary animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by game) it is alive or dead it has a position a WallObject is a GameObject it has a sound on fireball impact? it is a still image / stationary it has an impact animation / or transfers an impact animation it is dead it has a position A FireBall is a GameObject it carries a transferance of poinst "damage" (or healing, bad scroll effect?) (determinde by caster) it travels at a set velocity it travels in a direction it has a sound it has a travel animation it has an impact animation / or transfers an impact animation it has a fade animation? it has a lifespan (determined by caster) it is alive or dead it has a position As I look at this, I can see some common attributes in each object that I can carry up to the GameObject. I think I'm going to end the documentation here, it's taken me a bit of time to type this all out, tomorrow. I'll load up my IDE and my paint studio to get some good old fashioned cowboy hacking going!   D.

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >