Search Results

Search found 3722 results on 149 pages for 'choice'.

Page 143/149 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

  • OFM 11g: Implementing OAM SSO with Forms

    - by olaf.heimburger
    There is some confusion about the integration of OFM 11g Forms with Oracle Access Manager 11g (OAM). Some say this does not work, some say it works, but.... Actually, having implemented it many times I belong to the later group. Here is how. Caveat Before you start installing anything, take a step back and consider your current implementation and what you really need and want to achieve. The current integration of Forms 11g with OAM 11g does not support self-service account creation and password resets from the Forms application. If you really need this, you must use the existing Oracle AS 10.1.4.3 infrastructure. On the other hand, if your user population is pretty stable, you can enjoy the latest Forms 11g with OAM 11g. Assumptions The whole process should be done in one day. I assume that all domains and instances are started during setup, if you need to restart them on demand or purpose, be sure to have proper start/stop scripts, I don't mention them. Preparation It goes without saying, that you always should do a proper backup before you change anything on your production environment. With proper backup, I also mean a tested and verified restore process. If you dared to test it before, do it now. It pays off. Requirements For OAM 11g to work properly you need a LDAP repository. For the integration of Forms 11g you need an Oracle Internet Directory (OID) configured with the Oracle AS SSO LDAP extensions. For better support I usually give the latest version a try, in this case OID 11g is a good choice.During the Installation and Integration steps we use an upgrade wizard that needs the old OID configuration on the same host but in a different ORACLE_HOME. Installation vs Configuration With OFM 11g Oracle introduced a clear separation between Installation of the binaries (the software) and the Configuration of the instances (the runtime). This is really great as you can install all the software and create new instances when needed. In the following we adhere to this scheme and install the software first and then configure the instances later. Installation Steps The Oracle documentation contains all the necessary steps for the installation of all pieces of software. But some hints help to avoid traps and pitfalls. Step 1 The Database Start the installation with the database. It is quite obvious but we need an Oracle database for all the other steps. If you have one at hand, fine. If not, just install at least a Oracle 10.2.0.4 version. This database can be on a different host. Step 2 The Repository Creation Utility The next step should be to run the Repository Creation Utility (RCU). This is a client application that just needs to connect to your database. It can be run on any host that can reach the database and is a Windows or Linux 32-bit machine. When you run it, be sure to install the OID schema and the OAM schema. If you miss one of these, you can run the RCU again to install the missing schema. Step 3 The Foundation With OFM 11g Oracle started to use WebLogic Server 11g (WLS) as its foundation for all OFM 11g installation. We therefore install it first. Depending on your operating system, it might be possible, that no native installer is available. My approach to this dilemma is to use the WLS Generic Installer for all my installations. It does not include a JDK either but if you have both for your platform you are ready to go. Step 3a The JDK To make things interesting, Oracle currently has two JDKs in its portfolio. The Sun JDK and the JRockit JDK. Both are available for a number of platforms. If you are lucky and both are available for your platform, install both in a separate directory (and not one of your ORACLE_HOMEs) each, You can use the later as you like. Step 3b Install WLS for OID and OAM With the JDK installed, we start the generic installer with java -jar wls_generic.jar.STOP! Before you do this, check the version first. It should be 1.6.0_18 or later and not the GCC one (Some Linux distros have it installed by default). To verify the version, issue a java -version command and make sure that the output does not contain the text gcj and the version matches. If this does not work, use an absolute path like /opt/java/jdk1.6.0_23/bin/java to start the installer. The installer allows you to specify a path to install the software into, say /opt/oracle/iam/11.1.1.3 for the OID and OAM installation. We will call this IAM_HOME. Step 4 Install OID Now we are ready to install OID. Start the OID installer (in the Disk1 directory) and just select the installation only step. This will install the software only and does not configure the instance. Use the IAM_HOME as the target directory. Step 5 Install SOA Suite The IAM 11g Suite uses the BPEL component of the SOA Suite 11g for its workflows. This is a pretty closed environment and not to be used for SCA Composites. We install the SOA Suite in $IAM_HOME/soa. The installer only installs the binaries. Configuration will be done later. Step 6 Install OAM Once the installation of OID and SOA is done, we are ready to install the OAM software in the same IAM_HOME. Make sure to install the OAM binaries in a directory different from the one you used during the OID and SOA installation. As before, we only install the software, the instance will be created later. Step 7 Backup the Installation At this point, I normally do a backup (or snapshot in a virtual image) of the installation. Good when you need to go back to this point. Step 8 Configure OID The software is installed and now we need instances to run it. This process is called configuration. For OID use the config.sh found in $IAM_HOME/oid/bin to start the configuration wizard. Normally this runs smoothly. If you encounter some issues check the Oracle Support site for help. This configuration will also start the OID instance. Step 9 Install the Oracle AS SSO Schema Before we install the Forms software we need to install the Oracle AS SSO Schema into the database and OID. This is a rather dangerous procedure, but fully documented in the IAM Installation Guide, Chapter 10. You should finish this in one go, do not reboot your host during the whole procedure. As a precaution, you should make a backup of the OID instance before you start the procedure. Once the backup is ready, read the chapter, including every note, carefully. You can avoid a number of issues by following all the steps and will succeed with a working solution. Step 10 Configure OAM Reached this step? Great. You are ready to create an OAM instance. Use the $IAM_HOME/iam/common/binconfig.sh for this. This will open the WLS Domain Creation Wizard and asks for the libraries to be installed. You should at least select the OAM with Database repository item. The configuration will also start the OAM instance. Step 11 Install WLS for Forms 11g It is quite tempting to install everything in one ORACLE_HOME. Unfortunately this does not work for all OFM packages. Therefore we do another WLS installation in another ORACLE_HOME. The same considerations as in step 3b apply. We call this one FORMS_HOME. Step 12 Install Forms In the FORMS_HOME we now install the binaries for the Forms 11g software. Again, this is a install only step. Configuration starts with the next step. Step 13 Configure Forms To configure Forms 11g we start the Configuration Wizard (config.sh) in FORMS_HOME/bin. This wizard should create a new WebLogic Domain and an OHS instance! Do not extend existing domains or instances! Forms should run in its own instances! When all information is supplied, the wizard will create the domain and instance and starts them automatically.Step 14 Setup your Forms SSO EnvironmentOnce you have implemented and tested your Forms 11g instance, you can configured it for SSO. Yes, this requires the old Oracle AS SSO solution, OIDDAS for creating and assigning users and SSO to setup your partner applications. In this step you should consider to create every user necessary for use within the environment. When done, do not forget to test it. Step 15 Migrate the SSO Repository Since the final goal is to get rid of the old SSO implementation we need to migrate the old SSO repository into the new OID structure. Additionally, this step will also migrate all partner application configurations into OAM 11g. Quite convenient. To do this step, you have to start the upgrade agent (ua or ua.bat or ua.cmd) on the operating system level in $IAM_HOME/bin. Once finished, this wizard will create new osso.conf files for each partner application in $IAM_HOME/upgrade/temp/oam/.Note: At the time of this writing, this step only works if everything is on the same host (ie. OID, OAM, etc.). This restriction might be lifted in later releases. Step 16 Change your OHS sso.conf and shut down OC4J_SECURITY In Step 14 we verified that SSO for our Forms environment works fine. Now, we are shutting the old system done and reconfigure the OHS that acts as the Forms entry point. First we go to the OHS configuration directory and rename the old osso.conf  to osso.conf.10g. Now we change the moduleconf/mod_osso.conf  to point to the new osso.conf file. Copy the new osso.conf  file from $IAM_HOME/upgrade/temp/oam/ to the OHS configuration directory. Restart OHS, test forms by using the same forms links. OAM should now kick in and show the login dialog to ask for your user credentials.Done. Now your Forms environment is successfully integrated with OAM 11g.Enjoy. What's Next? This rather lengthy setup is just the foundation for your growing environment of OAM 11g protections. In the next entry we will show that Forms 11g and ADF Faces 11g can use the same OAM installation and provide real single sign-on. References Nearly everything is documented. Use the documentation! Oracle® Fusion Middleware Installation Guide for Oracle Identity Management 11gR1 Oracle® Fusion Middleware Installation Guide for Oracle Identity Management 11gR1, Chapter 11-14 Oracle® Fusion Middleware Administrator's Guide for Oracle Access Manager 11gR1, Appendix B Oracle® Fusion Middleware Upgrade Guide for Oracle Identity Management 11gR1, Chapter 10   

    Read the article

  • Book Review - Programming Windows Azure by Siriram Krishnan

    - by BuckWoody
    As part of my professional development, I’ve created a list of books to read throughout the year, starting in June of 2011. This a review of the first one, called Programming Windows Azure by Siriram Krishnan. You can find my entire list of books I’m reading for my career here: http://blogs.msdn.com/b/buckwoody/archive/2011/06/07/head-in-the-clouds-eyes-on-the-books.aspx  Why I Chose This Book: As part of my learning style, I try to read multiple books about a single subject. I’ve found that at least 3 books are necessary to get the right amount of information to me. This is a “technical” work, meaning that it deals with technology and not business, writing or other facets of my career. I’ll have a mix of all of those as I read along. I chose this work in addition to others I’ve read since it covers everything from an introduction to more advanced topics in a single book. It also has some practical examples of actually working with the product, particularly on storage. Although it’s dated, many examples normally translate. I also saw that it had pretty good reviews. What I learned: I learned a great deal about storage, and many useful code snippets. I do think that there could have been more of a focus on the application fabric - but of course that wasn’t as mature a feature when this book was written. I learned some great architecture examples, and in one section I learned more about encryption. In that example, however, I would rather have seen the examples go the other way - the book focused on moving data from on-premise to Azure storage in an encrypted fashion. Using the Application Fabric I would rather see sensitive data left in a hybrid fashion on premise, and connect to for the Azure application. Even so, the examples were very useful. If you’re looking for a good “starter” Azure book, this is a good choice. I also recommend the last chapter as a quick read for a DBA, or Database Administrator. It’s not very long, but useful. Note that the limits described are incorrect - which is one of the dangers of reading a book about any cloud offering. The services offered are updated so quickly that the information is in constant danger of being “stale”. Even so, I found this a useful book, which I believe will help me work with Azure better. Raw Notes: I take notes as I read, calling that process “reading with a pencil”. I find that when I do that I pay attention better, and record some things that I need to know later. I’ll take these notes, categorize them into a OneNote notebook that I synchronize in my Live.com account, and that way I can search them from anywhere. I can even read them on the web, since the Live.com has a OneNote program built in. Note that these are the raw notes, so they might not make a lot of sense out of context - I include them here so you can watch my though process. Programming Windows Azure by Siriram Krishnan: Learning about how to select applications suitable for Distributed Technology. Application Fabric gets the least attention; probably because it was newer at the time. Very clear (Chapter One) Good foundation Background and history, but not too much I normally arrange my descriptions differently, starting with the use-cases and moving to physicality, but this difference helps me. Interesting that I am reading this using Safari Books Online, which uses many of these concepts. Taught me some new aspects of a Hypervisor – very low-level information about the Azure Fabric (not to be confused with the Application Fabric feature) (Chapter Two) Good detail of what is included in the SDK. Even more is available now. CS = Cloud Service (Chapter 3) Place Storage info in the configuration file, since it can be streamed in-line with a running app. Ditto for logging, and keep separated configs for staging and testing. Easy-switch in and switch out.  (Chapter 4) There are two Runtime API’s, one of external and one for internal. Realizing how powerful this paradigm really is. Some places seem light, and to drop off but perhaps that’s best. Managing API is not charged, which is nice. I don’t often think about the price, until it comes to an actual deployment (Chapter 5) Csmanage is something I want to dig into deeper. API requires package moves to Blob storage first, so it needs a URL. Csmanage equivalent can be written in Unix scripting using openssl. Upgrades are possible, and you use the upgradeDomainCount attribute in the Service-Definition.csdef file  Always use a low-privileged account to test on the dev fabric, since Windows Azure runs in partial trust. Full trust is available, but can be dangerous and must be well-thought out. (Chapter 6) Learned how to run full CMD commands in a web window – not that you would ever do that, but it was an interesting view into those links. This leads to a discussion on hosting other runtimes (such as Java or PHP) in Windows Azure. I got an expanded view on this process, although this is where the book shows its age a little. Books can be a problem for Cloud Computing for this reason – things just change too quickly. Windows Azure storage is not eventually consistent – it is instantly consistent with multi-phase commit. Plumbing for this is internal, not required to code that. (Chapter 7) REST API makes the service interoperable, hybrid, and consistent across code architectures. Nicely done. Use affinity groups to keep data and code together. Side note: e-book readers need a common “notes” feature. There’s a decent quick description of REST in this chapter. Learned about CloudDrive code – PowerShell sample that mounts Blob storage as a local provider. Works against Dev fabric by default, can be switched to Account. Good treatment in the storage chapters on the differences between using Dev storage and Azure storage. These can be mitigated. No, blobs are not of any size or number. Not a good statement (Chapter 8) Blob storage is probably Azure’s closest play to Infrastructure as a Service (Iaas). Blob change operations must be authenticated, even when public. Chapters on storage are pretty in-depth. Queue Messages are base-64 encoded (Chapter 9) The visibility timeout ensures processing of message in a disconnected system. Order is not guaranteed for a message, so if you need that set an increasing number in the queue mechanism. While Queues are accessible via REST, they are not public and are secured by default. Interesting – the header for a queue request includes an estimated count. This can be useful to create more worker roles in a dynamic system. Each Entity (row) in the Azure Table service is atomic – all or nothing. (Chapter 10) An entity can have up to 255 Properties  Use “ID” for the class to indicate the key value, or use the [DataServiceKey] Attribute.  LINQ makes working with the Azure Table Service much easier, although Interop is certainly possible. Good description on the process of selecting the Partition and Row Key.  When checking for continuation tokens for pagination, include logic that falls out of the check in case you are at the last page.  On deleting a storage object, it is instantly unavailable, however a background process is dispatched to perform the physical deletion. So if you want to re-create a storage object with the same name, add retry logic into the code. Interesting approach to deleting an index entity without having to read it first – create a local entity with the same keys and apply it to the Azure system regardless of change-state.  Although the “Indexes” description is a little vague, it’s interesting to see a Folding and Stemming discussion a-la the Porter Stemming Algorithm. (Chapter 11)  Presents a better discussion of indexes (at least inverted indexes) later in the chapter. Great treatment for DBA’s in Chapter 11. We need to work on getting secondary indexes in Table storage. There is a limited form of transactions called “Entity Group Transactions” that, although they have conditions, makes a transactional system more possible. Concurrency also becomes an issue, but is handled well if you’re using Data Services in .NET. It watches the Etag and allows you to take action appropriately. I do not recommend using Azure as a location for secure backups. In fact, I would rather have seen the examples in (Chapter 12) go the other way, showing how data could be brought back to a local store as a DR or HA strategy. Good information on cryptography and so on even so. Chapter seems out of place, and should be combined with the Blob chapter.  (Chapter 13) on SQL Azure is dated, although the base concepts are OK.  Nice example of simple ADO.NET access to a SQL Azure (or any SQL Server Really) database.  

    Read the article

  • Experience your music in a whole new way with Zune for PC

    - by Matthew Guay
    Tired of the standard Media Player look and feel, and want something new and innovative?  Zune offers a fresh, new way to enjoy your music, videos, pictures, and podcasts, whether or not you own a Zune device. Microsoft started out on a new multimedia experience for PCs and mobile devices with the launch of the Zune several years ago.  The Zune devices have been well received and noted for their innovative UI, and the Zune HD’s fluid interface is the foundation for the widely anticipated Windows Phone 7.  But regardless of whether or not you have a Zune Device, you can still use the exciting new UI and services directly from your PC.  Zune for Windows is a very nice media player that offers a music and video store and wide support for multimedia formats including those used in Apple products.  And if you enjoy listening to a wide variety of music, it also offers the Zune Pass which lets you stream an unlimited number of songs to your computer and download 10 songs for keeps per month for $14.99/month. Or you can do a pre-paid music card as well.  It does all this using the new Metro UI which beautifully shows information using text in a whole new way.  Here’s a quick look at setting up and using Zune on your PC. Getting Started Download the installer (link below), and run it to begin setup.  Please note that Zune offers a separate version for computers running the 64 bit version of Windows Vista or 7, so choose it if your computer is running these. Once your download is finished, run the installer to setup Zune on your computer.  Accept the EULA when prompted. If there are any updates available, they will automatically download and install during the setup.  So, if you’re installing Zune from a disk (for example, one packaged with a Zune device), you don’t have to worry if you have the latest version.  Zune will proceed to install on your computer.   It may prompt you to restart your computer after installation; click Restart Now so you can proceed with your Zune setup.  The reboot appears to be for Zune device support, and the program ran fine otherwise without rebooting, so you could possibly skip this step if you’re not using a Zune device.  However, to be on the safe side, go ahead and reboot. After rebooting, launch Zune.  It will play a cute introduction video on first launch; press skip if you don’t want to watch it. Zune will now ask you if you want to keep the default settings or change them.  Choose Start to keep the defaults, or Settings to customize to your wishes.  Do note that the default settings will set Zune as your default media player, so click Settings if you wish to change this. If you choose to change the default settings, you can change how Zune finds and stores media on your computer.  In Windows 7, Zune will by default use your Windows 7 Libraries to manage your media, and will in fact add a new Podcasts library to Windows 7. If your media is stored on another location, such as on a server, then you can add this to the Library.  Please note that this adds the location to your system-wide library, not just the Zune player. There’s one last step.  Enter three of your favorite artists, and Zune will add Smart DJ mixes to your Quickplay list based on these.  Some less famous or popular artists may not be recognized, so you may have to try another if your choice isn’t available.  Or, you can click Skip if you don’t want to do this right now. Welcome to Zune!  This is the default first page, QuickPlay, where you can easily access your pinned and new items.   If you have a Zune account, or would like to create a new one, click Sign In on the top. Creating a new account is quick and simple, and if you’re new to Zune, you can try out a 14 day trial of Zune Pass for free if you want. Zune allows you to share your listening habits and favorites with friends or the world, but you can turn this off or change it if you like. Using Zune for Windows To access your media, click the Collection link on the top left.  Zune will show all the media you already have stored on your computer, organized by artist and album. Right-click on any album, and you choose to have Zune find album art or do a variety of other tasks with the media.   When playing media, you can view it in several unique ways.  First, the default Mix view will show related tracks to the music you’re playing from Smart DJ.  You can either play these fully if you’re a Zune Pass subscriber, or otherwise you can play 30 second previews. Then, for many popular artists, Zune will change the player background to show pictures and information in a unique way while the music is playing.  The information may range from history about the artist to the popularity of the song being played.   Zune also works as a nice viewer for the pictures on your computer. Start a slideshow, and Zune will play your pictures with nice transition effects and music from your library. Zune Store The Zune Store offers a wide variety of music, TV shows, and videos for purchase.  If you’re a Zune Pass subscriber, you can listen to or download any song without purchasing it; otherwise, you can preview a 30 second clip first. Zune also offers a wide selection of Podcasts you can subscribe to for free. Using Zune for PC with a Zune Device If you have a Zune device attached to your computer, you can easily add media files to it by simply dragging them to the Zune device icon in the left corner.  In the future, this will also work with Windows Phone 7 devices. If you have a Zune HD, you can also download and add apps to your device. Here’s the detailed information window for the weather app.  Click Download to add it to your device.   Mini Mode The Zune player generally takes up a large portion of your screen, and is actually most impressive when run maximized.  However, if you’re simply wanting to enjoy your tunes while you’re using your computer, you can use the Mini mode to still view music info and control Zune in a smaller mode.  Click the Mini Player button near the window control buttons in the top right to activate it. Now Zune will take up much less of your desktop.  This window will stay on top of other windows so you can still easily view and control it. Zune will display an image of the artist if one is available, and this shows up in Mini mode more often than it does in the full mode. And, in Windows 7, you could simply minimize Zune as you can control it directly from the taskbar thumbnail preview.   Even more controls are available from Zune’s jumplist in Windows 7.  You can directly access your Quickplay links or choose to shuffle all music without leaving the taskbar. Settings Although Zune is designed to be used without confusing menus and settings, you can tweak the program to your liking from the settings panel.  Click Settings near the top left of the window. Here you can change file storage, types, burn, metadata, and many more settings.  You can also setup Zune to stream media to your XBOX 360 if you have one.   You can also customize Zune’s look with a variety of modern backgrounds and gradients. Conclusion If you’re ready for a fresh way to enjoy your media, Zune is designed for you.  It’s innovative UI definitely sets it apart from standard media players, and is very pleasing to use.  Zune is especially nice if your computer is using XP, Vista Home Basic, or 7 Starter as these versions of Windows don’t include Media Center.  Additionally, the mini player mode is a nice touch that brings a feature of Windows 7’s Media Player to XP and Vista.  Zune is definitely one of our favorite music apps.  Try it out, and get a fresh view of your music today! Link Download Zune for Windows Similar Articles Productive Geek Tips Redeem Pre-paid Zune Card Points for Zune Marketplace MediaUpdate Your Zune Player SoftwaredoubleTwist is an iTunes Alternative that Supports Several DevicesFind Free or Cheap Indie Music at Amie StreetAmie Street Downloader Makes Purchasing Music Easier TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

    Read the article

  • CodePlex Daily Summary for Saturday, October 13, 2012

    CodePlex Daily Summary for Saturday, October 13, 2012Popular ReleasesArduino Installer For Atmel Studio 6: Arduino Installer - Version 1.01 Beta2: Bug Fixes - Handling spaces in avrdude path - Handling spaces in avrdude config path - Handling spaces in project names - Handling spaces in project path - hard coded directories pointing to my space has been removed New Features - Total of 7 project templates included - C program - C library - C++ program - C++ library - Arduino Unit Tests - Arduino library - Arduino program (sketch) - Group all supporting scripts under a script directory in the solution - Support for calling multiple pre-...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????,??????、????????????????。 ● AcDown??????????????????,????????????????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,????????.NET Framework 2.0???(x86),?????"?????????"??? (2)???????????Linux???,????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.70: Fixed issue described in discussion #399087: variable references within case values weren't getting resolved.GoogleMap Control: GoogleMap Control 6.1: Some important bug fixes and couple of new features were added. There are no major changes to the sample website. Source code could be downloaded from the Source Code section selecting branch release-6.1. Thus just builds of GoogleMap Control are issued here in this release. NuGet Package GoogleMap Control 6.1 NuGet Package FeaturesBounds property to provide ability to create a map by center and bounds as well; Setting in markup <artem:GoogleMap ID="GoogleMap1" runat="server" MapType="HY...mojoPortal: 2.3.9.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2393-released Note that we have separate deployment packages for .NET 3.5 and .NET 4.0, but we recommend you to use .NET 4, we will probably drop support for .NET 3.5 once .NET 4.5 is available The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code and are not intended for use in Visual Studio. To download the source code see getting the lates...OstrivDB: OstrivDB 0.1: - Storage configuration: objects serialization (Xml, Json), storage file compressing, data block size. - Caching for Select queries. - Indexing. - Batch of queries. - No special query language (LINQ used). - Integrated sorting and paging. - Multithreaded data processing.D3 Loot Tracker: 1.5.4: Fixed a bug where the server ip was not logged properly in the stats file.Captcha MVC: Captcha Mvc 2.1.2: v 2.1.2: Fixed problem with serialization. Made all classes from a namespace Jetbrains.Annotaions as the internal. Added autocomplete attribute and autocorrect attribute for captcha input element. Minor changes. v 2.1.1: Fixed problem with serialization. Minor changes. v 2.1: Added support for storing captcha in the session or cookie. See the updated example. Updated example. Minor changes. v 2.0.1: Added support for a partial captcha. Now you can easily customize the layout, s...DotNetNuke® Community Edition CMS: 06.02.04: Major Highlights Fixed issue where the module printing function was only visible to administrators Fixed issue where pane level skinning was being assigned to a default container for any content pane Fixed issue when using password aging and FB / Google authentication Fixed issue that was causing the DateEditControl to not load the assigned value Fixed issue that stopped additional profile properties to be displayed in the member directory after modifying the template Fixed er...Advanced DataGridView with Excel-like auto filter: 1.0.0.0: ?????? ??????WinRT XAML Toolkit: WinRT XAML Toolkit - 1.3.3: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features Attachable Behaviors AwaitableUI extensions Controls Converters Debugging helpers Extension methods Imaging helpers IO helpers VisualTree helpers Samples Recent changes NOTE:...VidCoder: 1.4.4 Beta: Fixed inability to create new presets with "Save As".MCEBuddy 2.x: MCEBuddy 2.3.2: Changelog for 2.3.2 (32bit and 64bit) 1. Added support for generating XBMC XML NFO files for files in the conversion queue (store it along with the source video with source video name.nfo). Right click on the file in queue and select generate XML 2. UI bugifx, start and end trim box locations interchanged 3. Added support for removing commercials from non DVRMS/WTV files (MP4, AVI etc) 4. Now checking for Firewall port status before enabling (might help with some firewall problems) 5. User In...Sandcastle Help File Builder: SHFB v1.9.5.0 with Visual Studio Package: General InformationIMPORTANT: On some systems, the content of the ZIP file is blocked and the installer may fail to run. Before extracting it, right click on the ZIP file, select Properties, and click on the Unblock button if it is present in the lower right corner of the General tab in the properties dialog. This release supports the Sandcastle October 2012 Release (v2.7.1.0). It includes full support for generating, installing, and removing MS Help Viewer files. This new release suppor...The GLMET Project: Shutdown Manager: Shutdown, Log off and Restart Timer Set time for shutdown, log off and restartClosedXML - The easy way to OpenXML: ClosedXML 0.68.0: ClosedXML now resolves formulas! Yes it finally happened. If you call cell.Value and it has a formula the library will try to evaluate the formula and give you the result. For example: var wb = new XLWorkbook(); var ws = wb.AddWorksheet("Sheet1"); ws.Cell("A1").SetValue(1).CellBelow().SetValue(1); ws.Cell("B1").SetValue(1).CellBelow().SetValue(1); ws.Cell("C1").FormulaA1 = "\"The total value is: \" & SUM(A1:B2)"; var...Json.NET: Json.NET 4.5 Release 10: New feature - Added Portable build to NuGet package New feature - Added GetValue and TryGetValue with StringComparison to JObject Change - Improved duplicate object reference id error message Fix - Fixed error when comparing empty JObjects Fix - Fixed SecAnnotate warnings Fix - Fixed error when comparing DateTime JValue with a DateTimeOffset JValue Fix - Fixed serializer sometimes not using DateParseHandling setting Fix - Fixed error in JsonWriter.WriteToken when writing a DateT...Readable Passphrase Generator: KeePass Plugin 0.7.2: Changes: Tested against KeePass 2.20.1 Tested under Ubuntu 12.10 (and KeePass 2.20) Added GenerateAsUtf8 method returning the encrypted passphrase as a UTF8 byte array.New ProjectsAaron.Core: It's a special core be used to help your project become standardization. It provides the standard platform, including core systems, data flows,...AFSSignarlRServer: Server ready tryAgileFramework: Agile Framework in order to build easily application based on WCF, NHibernate , WPF, and multithreadingala, A Programming Language: ala, A Programming LanguageBaseSRS (Basic Service Request System): BaseSRS is a basic "Service Request System" or "SRS" which can be adapted and used by anyone. ContainerVariations: ContainerVariations is a collection of similar unit tests projects, each applied to a different Inversion of Control container. If successful, it will provide a consistent and comprehensive set of examples for popular .NET IoC containers. It is developed in C#.COST Policies - ART Work: COST Policies: ART Work ? ??????? ?????? ?? ??????? ?? ??????????: -baceCP -guideCPCS Script Runner: Provide users an easy way of executing C# programs (scripts) that are compiled on the fly.DbUtility: DbUtility is a free utility to display databases info like, size, backup date, instance name, database name, last backup log date, with export to excel feature.EchoLink Monitor: EchoLink Monitor is a management tool for EchoLink sysops maintaining remote EchoLink nodes.NextUI: We are on the way...Notas Alexandre: Apenas teste ainda...será modificado depois...Orchard CMS Amba.HtmlBlocks: Amba.HtmlBlocks module for Orchard CMS 1.5.1Portable Basemap Server: multiple map data source<--PBS-->multiple map apiRonYee: ??????????????。 ????(viewer)???????????????????,???????????????。 ????(customer)?????????????????,???????,?????????????????。 ??????(user)??????????????????。ShangWu: ????,???StoreIpAddress: Examine different means to store IP addressesSummon for Umbraco: Summon for Umbraco is a .NET solution for Summon API, provided by Serials Solutions.teasingg: this is for testing code plexWeb Scripting and Content Creation assignment: A stub project.WriteableBitmapEx for Windows Embedded: WriteableBitmapEx for Windows Embedded Compact 7 and Silverlight for Windows Embedded. Requires XAML In The Hand for managed code development.X.Web.Sitemap: X.Web.Sitemap is a part of X-Framework library. X.Web.Sitemap allows quickly and easily generate a Google-compatible filesZeropaste: A pastebin with minimal features.??: ?????EPUB????。

    Read the article

  • VLOOKUP in Excel, part 2: Using VLOOKUP without a database

    - by Mark Virtue
    In a recent article, we introduced the Excel function called VLOOKUP and explained how it could be used to retrieve information from a database into a cell in a local worksheet.  In that article we mentioned that there were two uses for VLOOKUP, and only one of them dealt with querying databases.  In this article, the second and final in the VLOOKUP series, we examine this other, lesser known use for the VLOOKUP function. If you haven’t already done so, please read the first VLOOKUP article – this article will assume that many of the concepts explained in that article are already known to the reader. When working with databases, VLOOKUP is passed a “unique identifier” that serves to identify which data record we wish to find in the database (e.g. a product code or customer ID).  This unique identifier must exist in the database, otherwise VLOOKUP returns us an error.  In this article, we will examine a way of using VLOOKUP where the identifier doesn’t need to exist in the database at all.  It’s almost as if VLOOKUP can adopt a “near enough is good enough” approach to returning the data we’re looking for.  In certain circumstances, this is exactly what we need. We will illustrate this article with a real-world example – that of calculating the commissions that are generated on a set of sales figures.  We will start with a very simple scenario, and then progressively make it more complex, until the only rational solution to the problem is to use VLOOKUP.  The initial scenario in our fictitious company works like this:  If a salesperson creates more than $30,000 worth of sales in a given year, the commission they earn on those sales is 30%.  Otherwise their commission is only 20%.  So far this is a pretty simple worksheet: To use this worksheet, the salesperson enters their sales figures in cell B1, and the formula in cell B2 calculates the correct commission rate they are entitled to receive, which is used in cell B3 to calculate the total commission that the salesperson is owed (which is a simple multiplication of B1 and B2). The cell B2 contains the only interesting part of this worksheet – the formula for deciding which commission rate to use: the one below the threshold of $30,000, or the one above the threshold.  This formula makes use of the Excel function called IF.  For those readers that are not familiar with IF, it works like this: IF(condition,value if true,value if false) Where the condition is an expression that evaluates to either true or false.  In the example above, the condition is the expression B1<B5, which can be read as “Is B1 less than B5?”, or, put another way, “Are the total sales less than the threshold”.  If the answer to this question is “yes” (true), then we use the value if true parameter of the function, namely B6 in this case – the commission rate if the sales total was below the threshold.  If the answer to the question is “no” (false), then we use the value if false parameter of the function, namely B7 in this case – the commission rate if the sales total was above the threshold. As you can see, using a sales total of $20,000 gives us a commission rate of 20% in cell B2.  If we enter a value of $40,000, we get a different commission rate: So our spreadsheet is working. Let’s make it more complex.  Let’s introduce a second threshold:  If the salesperson earns more than $40,000, then their commission rate increases to 40%: Easy enough to understand in the real world, but in cell B2 our formula is getting more complex.  If you look closely at the formula, you’ll see that the third parameter of the original IF function (the value if false) is now an entire IF function in its own right.  This is called a nested function (a function within a function).  It’s perfectly valid in Excel (it even works!), but it’s harder to read and understand. We’re not going to go into the nuts and bolts of how and why this works, nor will we examine the nuances of nested functions.  This is a tutorial on VLOOKUP, not on Excel in general. Anyway, it gets worse!  What about when we decide that if they earn more than $50,000 then they’re entitled to 50% commission, and if they earn more than $60,000 then they’re entitled to 60% commission? Now the formula in cell B2, while correct, has become virtually unreadable.  No-one should have to write formulae where the functions are nested four levels deep!  Surely there must be a simpler way? There certainly is.  VLOOKUP to the rescue! Let’s redesign the worksheet a bit.  We’ll keep all the same figures, but organize it in a new way, a more tabular way: Take a moment and verify for yourself that the new Rate Table works exactly the same as the series of thresholds above. Conceptually, what we’re about to do is use VLOOKUP to look up the salesperson’s sales total (from B1) in the rate table and return to us the corresponding commission rate.  Note that the salesperson may have indeed created sales that are not one of the five values in the rate table ($0, $30,000, $40,000, $50,000 or $60,000).  They may have created sales of $34,988.  It’s important to note that $34,988 does not appear in the rate table.  Let’s see if VLOOKUP can solve our problem anyway… We select cell B2 (the location we want to put our formula), and then insert the VLOOKUP function from the Formulas tab: The Function Arguments box for VLOOKUP appears.  We fill in the arguments (parameters) one by one, starting with the Lookup_value, which is, in this case, the sales total from cell B1.  We place the cursor in the Lookup_value field and then click once on cell B1: Next we need to specify to VLOOKUP what table to lookup this data in.  In this example, it’s the rate table, of course.  We place the cursor in the Table_array field, and then highlight the entire rate table – excluding the headings: Next we must specify which column in the table contains the information we want our formula to return to us.  In this case we want the commission rate, which is found in the second column in the table, so we therefore enter a 2 into the Col_index_num field: Finally we enter a value in the Range_lookup field. Important:  It is the use of this field that differentiates the two ways of using VLOOKUP.  To use VLOOKUP with a database, this final parameter, Range_lookup, must always be set to FALSE, but with this other use of VLOOKUP, we must either leave it blank or enter a value of TRUE.  When using VLOOKUP, it is vital that you make the correct choice for this final parameter. To be explicit, we will enter a value of true in the Range_lookup field.  It would also be fine to leave it blank, as this is the default value: We have completed all the parameters.  We now click the OK button, and Excel builds our VLOOKUP formula for us: If we experiment with a few different sales total amounts, we can satisfy ourselves that the formula is working. Conclusion In the “database” version of VLOOKUP, where the Range_lookup parameter is FALSE, the value passed in the first parameter (Lookup_value) must be present in the database.  In other words, we’re looking for an exact match. But in this other use of VLOOKUP, we are not necessarily looking for an exact match.  In this case, “near enough is good enough”.  But what do we mean by “near enough”?  Let’s use an example:  When searching for a commission rate on a sales total of $34,988, our VLOOKUP formula will return us a value of 30%, which is the correct answer.  Why did it choose the row in the table containing 30% ?  What, in fact, does “near enough” mean in this case?  Let’s be precise: When Range_lookup is set to TRUE (or omitted), VLOOKUP will look in column 1 and match the highest value that is not greater than the Lookup_value parameter. It’s also important to note that for this system to work, the table must be sorted in ascending order on column 1! If you would like to practice with VLOOKUP, the sample file illustrated in this article can be downloaded from here. Similar Articles Productive Geek Tips Using VLOOKUP in ExcelImport Microsoft Access Data Into ExcelImport an Access Database into ExcelCopy a Group of Cells in Excel 2007 to the Clipboard as an ImageShare Access Data with Excel in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition

    Read the article

  • Craftsmanship is ALL that Matters

    - by Wayne Molina
    Today, I'm going to talk about a touchy subject: the notion of working in a company that doesn't use the prescribed "best practices" in its software development endeavours.  Over the years I have, using a variety of pseudonyms, asked this question on popular programming forums.  Although I always add in some minor variation of the story to avoid suspicion that it's the same person posting, the crux of the tale remains the same: A Programmer’s Tale A junior software developer has just started a new job at an average company, creating average line-of-business applications for internal use (the most typical scenario programmers find themselves in).  This hypothetical newbie has spent a lot of time reading up on the "theory" of software development, devouring books, blogs and screencasts from well-known and respected software developers in the community in order to broaden his knowledge and "do what the pros do".  He begins his new job, eager to apply what he's learned on a real-world project only to discover that his new teammates doesn't use any of those concepts and techniques.  They hack their way through development, or in a best-case scenario use some homebrew, thrown-together semblance of a framework for their applications that follows not one of the best practices suggested by the “elite” in the software community - things like TDD (TDD as a "best practice" is the only subjective part of this post, but it's included here due to a very large following of respected developers who consider it one), the SOLID principles, well-known and venerable tools, even version control in a worst case and truly nightmarish scenario.  Our protagonist is frustrated that he isn't doing things the "proper" way - a way he's spent personal time digesting and learning about and, more importantly, a way that some of the top developers in the industry advocate - and turns to a forum to ask the advice of his peers. Invariably the answer I, in the guise of the concerned newbie, will receive is that A) I don't know anything and should just shut my mouth and sling code the bad way like everybody else on the team, and B) These "best practices" are fade or a joke, and the only thing that matters is shipping software to your customers. I am here today to say that anyone who says this, or anything like it, is not only full of crap but indicative of exactly the type of “developer” that has helped to give our industry a bad name.  Here is why: One Who Knows Nothing, Understands Nothing On one hand, you have the cognoscenti of the .NET development world.  Guys like James Avery, Jeremy Miller, Ayende Rahien and Rob Conery; all well-respected and noted programmers that are pretty much our version of celebrities.  These guys write blogs, books, and post videos outlining the "correct" way of writing software to make sure it not only works but is maintainable and extensible and a joy to work with.  They tout the virtues of the SOLID principles, or of using TDD/BDD, or using a mature ORM like NHibernate, Subsonic or even Entity Framework. On the other hand, you have Joe Everyman, Lead Software Developer at Initrode Corporation - in our hypothetical story Joe is the junior developer's new boss.  Joe's been with Initrode for 10 years, starting as the company’s very first programmer and over the years building up a little fiefdom of his own until at the present he’s in charge of all Initrode’s software development.  Joe writes code the same way he always has, without bothering to learn much, if anything.  He looked at NHibernate once and found it was "too hard", so he uses a primitive implementation of the TableDataGateway pattern as a wrapper around SqlClient.SqlConnection and SqlClient.SqlCommand instead of an actual ORM (or, in a better case scenario, has created his own ORM); the thought of using LINQ or Entity Framework or really anything other than his own hastily homebrew solution has never occurred to him.  He doesn't understand TDD and considers “testing” to be using the .NET debugger to step through code, or simply loading up an app and entering some values to see if it works.  He doesn't really understand SOLID, and he doesn't care to.  He's worked as a programmer for years, and that's all that counts.  Right?  WRONG. Who would you rather trust?  Someone with years of experience and who writes books, creates well-known software and is akin to a celebrity, or someone with no credibility outside their own minute environment who throws around their clout and company seniority as the "proof" of their ability?  Joe Everyman may have years of experience at Initrode as a programmer, and says to do things "his way" but someone like Jeremy Miller or Ayende Rahien have years of experience at companies just like Initrode, THEY know ten times more than Joe Everyman knows or could ever hope to know, and THEY say to do things "this way". Here's another way of thinking about it: If you wanted to get into politics and needed advice on the best way to do it, would you rather listen to the mayor of Hicktown, USA or Barack Obama?  One is a small-time nobody while the other is very well-known and, as such, would probably have much more accurate and beneficial advice. NOTE: The selection of Barack Obama as an example in no way, shape, or form suggests a political affiliation or political bent to this post or blog, and no political innuendo should be mistakenly read from it; the intent was merely to compare a small-time persona with a well-known persona in a non-software field.  Feel free to replace the name "Barack Obama" with any well-known Congressman, Senator or US President of your choice. DIY Considered Harmful I will say right now that the homebrew development environment is the WORST one for an aspiring programmer, because it relies on nothing outside it's own little box - no useful skill outside of the small pond.  If you are forced to use some half-baked, homebrew ORM created by your Director of Software, you are not learning anything valuable you can take with you in the future; now, if you plan to stay at Initrode for 10 years like Joe Everyman, this is fine and dandy.  However if, like most of us, you want to advance your career outside a very narrow space you will do more harm than good by sticking it out in an environment where you, to be frank, know better than everybody else because you are aware of alternative and, in almost most cases, better tools for the job.  A junior developer who understands why the SOLID principles are good to follow, or why TDD is beneficial, or who knows that it's better to use NHibernate/Subsonic/EF/LINQ/well-known ORM versus some in-house one knows better than a senior developer with 20 years experience who doesn't understand any of that, plain and simple.  Anyone who disagrees is either a liar, or someone who, just like Joe Everyman, Lead Developer, relies on seniority and tenure rather than adapting their knowledge as things evolve. In many cases, the Joe Everymans of the world act this way out of fear - they cannot possibly fathom that a “junior” could know more than them; after all, they’ve spent 10 or more years in the same company, doing the same job, cranking out the same shoddy software.  And here comes a newbie who hasn’t spent 10+ years doing the same things, with a fresh and often radical take on the craft, and Joe Everyman is afraid he might have to put some real effort into his career again instead of just pointing to his 10 years of service at Initrode as “proof” that he’s good, or that he might have to learn something new to improve; in most cases the problem is Joe Everyman, and by extension Initrode itself, has a mentality of just being “good enough”, and mediocrity is the rule of the day. A Thorn Bush is No Place for a Phoenix My advice is that if you work on a team where they don't use the best practices that some of the most famous developers in our field say is the "right" way to do things (and have legions of people who agree), and YOU are aware of these practices and can see why they work, then LEAVE the company.  Find a company where they DO care about quality, and craftsmanship, otherwise you will never be happy.  There is no point in "dumbing" yourself down to the level of your co-workers and slinging code without care to craftsmanship.  In 95% of these situations there will be no point in bringing it to the attention of Joe Everyman because he won't listen; he might even get upset that someone is trying to "upstage" him and fire the newbie, and replace someone with loads of untapped potential with a drone that will just nod affirmatively and grind out the tasks assigned without question. Find a company that has people smart enough to listen to the "best and brightest", and be happy.  Do not, I repeat, DO NOT waste away in a job working for ignorant people.  At the end of the day software development IS a craft, and a level of craftsmanship is REQUIRED for any serious professional.  When you have knowledgeable people with the credibility to back it up saying one thing, and small-time people who are, to put it bluntly, nobodies in the field saying and doing something totally different because they can't comprehend it, leave the nobodies to their own devices to fade into obscurity.  Work for a company that uses REAL software engineering techniques and really cares about craftsmanship.  The biggest issue affecting our career, and the reason software development has never been the respected, white-collar career it was meant to be, is because hacks and charlatans can pass themselves off as professional programmers without following a lick of good advice from programmers much better at the craft than they are.  These modern day snake-oil salesmen entrench themselves in companies by hoodwinking non-technical businesspeople and customers with their shoddy wares, end up in senior/lead/executive positions, and push their lack of knowledge on everybody unfortunate enough to work with/for/under them, crushing any dissent or voices of reason and change under their tyrannical heel and leaving behind a trail of dismayed and, often, unemployed junior developers who were made examples of to keep up the facade and avoid the shadow of doubt being cast upon them. To sum this up another way: If you surround yourself with learned people, you will learn.  Surround yourself with ignorant people who can't, as the saying goes, see the forest through the trees, and you'll learn nothing of any real value.  There is more to software development than just writing code, and the end goal should not be just "shipping software", it should be shipping software that is extensible, maintainable, and above all else software whose creation has broadened your knowledge in some capacity, even if a minor one.  An eager newbie who knows theory and thirsts for knowledge can easily be moulded and taught the advanced topics, but the same can't be said of someone who only cares about the finish line.  This industry needs more people espousing the benefits of software craftsmanship and proper software engineering techniques, and less Joe Everymans who are unwilling to adapt or foster new ways of thinking. Conclusion - I Cast “Protection from Fire” I am fairly certain this post will spark some controversy and might even invite the flames.  Please keep in mind these are opinions and nothing more.  A little healthy rant and subsequent flamewar can be good for the soul once in a while.  To paraphrase The Godfather: It helps to get rid of the bad blood.

    Read the article

  • VSNewFile: A Visual Studio Addin to More Easily Add New Items to a Project

    - by InfinitiesLoop
    My first Visual Studio Add-in! Creating add-ins is pretty simple, once you get used to the CommandBar model it is using, which is apparently a general Office suite extensibility mechanism. Anyway, let me first explain my motivation for this. It started out as an academic exercise, as I have always wanted to dip my feet in a little VS extensibility. But I thought of a legitimate need for an add-in, at least in my personal experience, so it took on new life. But I figured I can’t be the only one who has felt this way, so I decided to publish the add-in, and host it on GitHub (VSNewFile on GitHub) hoping to spur contributions. Adding Files the Built-in Way Here’s the problem I wanted to solve. You’re working on a project, and it’s time to add a new file to the project. Whatever it is – a class, script, html page, aspx page, or what-have-you, you go through a menu or keyboard shortcut to get to the “Add New Item” dialog. Typically, you do it by right-clicking the location where you want the file (the project or a folder of it): This brings up a dialog the contains, well, every conceivable type of item you might want to add. It’s all the available item templates, which can result in anywhere from a ton to a veritable sea of choices. To be fair, this dialog has been revamped in Visual Studio 2010, which organizes it a little better than Visual Studio 2008, and adds a search box. It also loads noticeably faster.   To me, this dialog is just getting in my way. If I want to add a JavaScript script to my project, I don’t want to have to hunt for the script template item in this dialog. Yes, it is categorized, and yes, it now has a search box. But still, all this UI to swim through when all I need is a new file in the project. I will name it. I will provide the content, I don’t even need a ‘template’. VS kind of realizes this. In the add menu in a class library project, for example, there is a “Add Class…” choice. But all this really does is select that project item from the dialog by default. You still must wait for the dialog, see it, and type in a name for the file. How is that really any different than hitting F2 on an existing item? It isn’t. Adding Files the Hack Way What I often find myself doing, just to avoid going through this dialog, is to copy and paste an existing file, rename it, then “CTRL-A, DEL” the content. In a few short keystrokes I’ve got my new file. Even if the original file wasn’t the right type, it doesn’t matter – I will rename it anyway, including the extension. It works well enough if the place I am adding the file to doesn’t have much in it already. But if there are a lot of files at that level, it sucks, because the new file will have the name “Copy of xyz”, causing it to be moved into the ‘C’ section of the alphabetically sorted items, which might be far, far away from the original file (and so I tend to try and copy a file that starts with ‘C’ *evil grin*). Using ‘Export Template’ To be completely fair I should at least mention this feature. I’m not even sure if this is new in VS 2010 or not (I think so). But it allows you to export a project item or items, including potential project references required by it. Then it becomes a new item in the available ‘installed templates’. No doubt this is useful to help bootstrap new projects. But that still requires you to go through the ‘New Item’ dialog. Adding Files with VSNewFile So hopefully I have sufficiently defined the problem and got a few of you to think, “Yeah, me too!”… What VSNewFile does is let you skip the dialog entirely by adding project items directly to the context menu. But it does a bit more than that, so do read on. For example, to add a new class, you can right-click the location and pick that option. A new .cs file is instantly added to the project, and the new item is selected and put into the ‘rename’ mode immediately. The default items available are shown here. But you can customize them. You can also customize the content of each template. To do so, you create a directory in your documents folder, ‘VSNewFile Templates’. In there, you drop the templates you want to use, but you name them in a particular way. For example, here’s a template that will add a new item named “Add TITLE”. It will add a project item named “SOMEFILE.foo” (or ‘SOMEFILE1.foo’ if that exists, etc). The format of the file name is: <ORDER>_<KEY>_<BASE FILENAME>_<ICON ID>_<TITLE>.<EXTENTION> Where: <ORDER> is a number that lets you determine the order of the items in the menu (relative to each other). <KEY> is a case sensitive identifier different for each template item. More on that later. <BASE FILENAME> is the default name of the file, which doesn’t matter that much, since they will be renaming it anyway. <ICON ID> is a number the dictates the icon used for the menu item. There are a huge number of built-in choices. More on that later. <TITLE> is the string that will appear in the menu. And, the contents of the file are the default content for the item (the ‘template’). The content of the file can contain anything you want, of course. But it also supports two tokens: %NAMESPACE% and %FILENAME%, which will be replaced with the corresponding values. Here is the content of this sample: testing Namespace = %NAMESPACE% Filename = %FILENAME% I kind went back and forth on this. I could have made it so there’d be an XML or JSON file that defines the templates, instead of cramming all this data into the filename itself. I like the simplicity of this better. It makes it easy to customize since you can literally just throw these files around, copy them from someone else, etc, without worrying about merge data into a central description file, in whatever format. Here’s our new item showing up: Practical Use One immediate thing I am using this for is to make it easier to add very commonly used scripts to my web projects. For example, uh, say, jQuery? :) All I need to do is drop jQuery-1.4.2.js and jQuery-1.4.2.min.js into the templates folder, provide the order, title, etc, and then instantly, I can now add jQuery to any project I have without even thinking about “where is jQuery? Can I copy it from that other project?”   Using the KEY There are two reasons for the ‘key’ portion of the item. First, it allows you to turn off the built-in, default templates, which are: FILE = Add File (generic, empty file) VB = Add VB Class CS = Add C# Class (includes some basic usings) HTML = Add HTML page (includes basic structure, doctype, etc) JS = Add Script (includes an immediately-invoking function closure) To turn one off, just include a file with the name “_<KEY>”. For example, to turn off all the items except our custom one, you do this: The other reason for the key is that there are new Visual Studio Commands created for each one. This makes it possible to bind a keyboard shortcut to one of them. So you could, for example, have a keyboard combination that adds a new web page to your website, or a new CS class to your class library, etc. Here is our sample item showing up in the keyboard bindings option. Even though the contents of the template directory may change from one launch of Visual Studio to the next, the bindings will remain attached to any item with a particular key, thanks to it taking care not to lose keyboard bindings even though the commands are completely recreated each time. The Icon Face ID Visual Studio uses a Microsoft Office style add-in mechanism, I gather. There are a predetermined set of built-in icons available. You can use your own icons when developing add-ins, of course, but I’m no designer. I just wanted to find appropriate-ish icons for the built-in templates, and allow you to choose from an existing built-in icon for your own. Unfortunately, there isn’t a lot out there on the interwebs that helps you figure out what the built-in types are. There’s an MSDN article that describes at length a way to create a program that lists all the icons. But I don’t want to write a program to figure them out! Just show them to me! Sheesh :) Thankfully, someone out there felt the same way, and uses a novel hack to get the icons to show up in an outlook toolbar. He then painstakingly took screenshots of them, one group at a time. It isn’t complete though – there are tens of thousands of icons. But it’s good enough. If anyone has an exhaustive list, please let me, and the rest of the add-in community know. Icon Face ID Reference Installing the Add-in It will work with Visual Studio 2008 and Visual Studio 2010. Just unzip the release into your Documents\Visual Studio 20xx\Addins folder. It contains the binary and the Visual Studio “.addin” file. For example, the path to mine is: C:\Users\InfinitiesLoop\Documents\Visual Studio 2010\Addins Conclusion So that’s it! I hope you find it as useful as I have. It’s on GitHub, so if you’re into this kind of thing, please do fork it and improve it! Reference: VSNewFile on GitHub VSNewFile release on GitHub Icon Face ID Reference

    Read the article

  • The future for Microsoft

    - by Scott Dorman
    Originally posted on: http://geekswithblogs.net/sdorman/archive/2013/10/16/the-future-for-microsoft.aspxMicrosoft is in the process of reinventing itself. While some may argue that it’s “too little, too late” or that their growing consumer-focused strategy is wrong, the truth of the situation is that Microsoft is reinventing itself into a new company. While Microsoft is now calling themselves a “devices and services” company, that’s not entirely accurate. Let’s look at some facts: Microsoft will always (for the long-term foreseeable future) be financially split into the following divisions: Windows/Operating Systems, which for FY13 made up approximately 24% of overall revenue. Server and Tools, which for FY13 made up approximately 26% of overall revenue. Enterprise/Business Products, which for FY13 made up approximately 32% of overall revenue. Entertainment and Devices, which for FY13 made up approximately 13% of overall revenue. Online Services, which for FY13 made up approximately 4% of overall revenue. It is important to realize that hardware products like the Surface fall under the Windows/Operating Systems division while products like the Xbox 360 fall under the Entertainment and Devices division. (Presumably other hardware, such as mice, keyboards, and cameras, also fall under the Entertainment and Devices division.) It’s also unclear where Microsoft’s recent acquisition of Nokia’s handset division will fall, but let’s assume that it will be under Entertainment and Devices as well. Now, for the sake of argument, let’s assume a slightly different structure that I think is more in line with how Microsoft presents itself and how the general public sees it: Consumer Products and Devices, which would probably make up approximately 9% of overall revenue. Developer Tools, which would probably make up approximately 13% of overall revenue. Enterprise Products and Devices, which would probably make up approximately 47% of overall revenue. Entertainment, which would probably make up approximately 13% of overall revenue. Online Services, which would probably make up approximately 17% of overall revenue. (Just so we’re clear, in this structure hardware products like the Surface, a portion of Windows sales, and other hardware fall under the Consumer Products and Devices division. I’m assuming that more of the income for the Windows division is coming from enterprise/volume licenses so 15% of that income went to the Enterprise Products and Devices division. Most of the enterprise services, like Azure, fall under the Online Services division so half of the Server and Tools income went there as well.) No matter how you look at it, the bulk of Microsoft’s income still comes from not just the enterprise but also software sales, and this really shouldn’t surprise anyone. So, now that the stage is set…what’s the future for Microsoft? The future I see for Microsoft (again, this is just my prediction based on my own instinct, gut-feel and publicly available information) is this: Microsoft is becoming a consumer-focused enterprise company. Let’s look at it a different way. Microsoft is an enterprise-focused company trying to create a larger consumer presence.  To a large extent, this is the exact opposite of Apple, who is really a consumer-focused company trying to create a larger enterprise presence. The major reason consumer-focused companies (like Apple) have started making in-roads into the enterprise is the “bring your own device” phenomenon. Yes, Apple has created some “game-changing” products but their enterprise influence is still relatively small. Unfortunately (for this blog post at least), Apple provides revenue in terms of hardware products rather than business divisions, so it’s not possible to do a direct comparison. However, in the interest of transparency, from Apple’s Quarterly Report (filed 24 July 2013), their revenue breakdown is: iPhone, which for the 3 months ending 29 June 2013 made up approximately 51% of revenue. iPad, which for the 3 months ending 29 June 2013 made up approximately 18% of revenue. Mac, which for the 3 months ending 29 June 2013 made up approximately 14% of revenue. iPod, which for the 3 months ending 29 June 2013 made up approximately 2% of revenue. iTunes, Software, and Services, which for the 3 months ending 29 June 2013 made up approximately 11% of revenue. Accessories, which for the 3 months ending 29 July 2013 made up approximately 3% of revenue. From this, it’s pretty clear that Apple is a consumer-and-hardware-focused company. At this point, you may be asking yourself “Where is all of this going?” The answer to that lies in Microsoft’s shift in company focus. They are becoming more consumer focused, but what exactly does that mean? The biggest change (at least that’s been in the news lately) is the pending purchase of Nokia’s handset division. This, in combination with their Surface line of tablets and the Xbox, will put Microsoft squarely in the realm of a hardware-focused company in addition to being a software-focused company. That can (and most likely will) shift the revenue split to looking at revenue based on software sales (both consumer and enterprise) and also hardware sales (mostly on the consumer side). If we look at things strictly from a Windows perspective, Microsoft clearly has a lot of irons in the fire at the moment. Discounting the various product SKUs available and painting the picture with broader strokes, there are currently 5 different Windows-based operating systems: Windows Phone Windows Phone 7.x, which runs on top of the Windows CE kernel Windows Phone 8.x+, which runs on top of the Windows 8 kernel Windows RT The ARM-based version of Windows 8, which runs on top of the Windows 8 kernel Windows (Pro) The Intel-based version of Windows 8, which runs on top of the Windows 8 kernel Xbox The Xbox 360, which runs it’s own proprietary OS. The Xbox One, which runs it’s own proprietary OS, a version of Windows running on top of the Windows 8 kernel and a proprietary “manager” OS which manages the other two. Over time, Windows Phone 7.x devices will fade so that really leaves 4 different versions. Looking at Windows RT and Windows Phone 8.x paints an interesting story. Right now, all mobile phone devices run on some sort of ARM chip and that doesn’t look like it will change any time soon. That means Microsoft has two different Windows based operating systems for the ARM platform. Long term, it doesn’t make sense for Microsoft to continue supporting that arrangement. I have long suspected (since the Surface was first announced) that Microsoft will unify these two variants of Windows and recent speculation from some of the leading Microsoft watchers lends credence to this suspicion. It is rumored that upcoming Windows Phone releases will include support for larger screen sizes, relax the requirement to have a hardware-based back button and will continue to improve API parity between Windows Phone and Windows RT. At the same time, Windows RT will include support for smaller screen sizes. Since both of these operating systems are based on the same core Windows kernel, it makes sense (both from a financial and development resource perspective) for Microsoft to unify them. The user interfaces are already very similar. So similar in fact, that visually it’s difficult to tell them apart. To illustrate this, here are two screen captures: Other than a few variations (the Bing News app, the picture shown in the Pictures tile and the spacing between the tiles) these are identical. The one on the left is from my Windows 8.1 laptop (which looks the same as on my Surface RT) and the one on the right is from my Windows Phone 8 Lumia 925. This pretty clearly shows that from a consumer perspective, there really is no practical difference between how these two operating systems look and how you interact with them. For the consumer, your entertainment device (Xbox One), phone (Windows Phone) and mobile computing device (Surface [or some other vendors tablet], laptop, netbook or ultrabook) and your desktop computing device (desktop) will all look and feel the same. While many people will denounce this consistency of user experience, I think this will be a good thing in the long term, especially for the upcoming generations. For example, my 5-year old son knows how to use my tablet, phone and Xbox because they all feature nearly identical user experiences. When Windows 8 was released, Microsoft allowed a Windows Store app to be purchased once and installed on as many as 5 devices. With Windows 8.1, this limit has been increased to over 50. Why is that important? If you consider that your phone, computing devices, and entertainment device will be running the same operating system (with minor differences related to physical hardware chipset), that means that I could potentially purchase my sons favorite Angry Birds game once and be able to install it on all of the devices I own. (And for those of you wondering, it’s only 7 [at the moment].) From an app developer perspective, the story becomes even more compelling. Right now there are differences between the different operating systems, but those differences are shrinking. The user interface technology for both is XAML but there are different controls available and different user experience concepts. Some of the APIs available are the same while some are not. You can’t develop a Windows Phone app that can also run on Windows (either Windows Pro or RT). With each release of Windows Phone and Windows RT, those difference become smaller and smaller. Add to this mix the Xbox One, which will also feature a Windows-based operating system and the same “modern” (tile-based) user interface and the visible distinctions between the operating systems will become even smaller. Unifying the operating systems means one set of APIs and one code base to maintain for an app that can run on multiple devices. One code base means it’s easier to add features and fix bugs and that those changes become available on all devices at the same time. It also means a single app store, which will increase the discoverability and reach of your app and consolidate revenue and app profile management. Now, the choice of what devices an app is available on becomes a simple checkbox decision rather than a technical limitation. Ultimately, this means more apps available to consumers, which is always good for the app ecosystem. Is all of this just rumor, speculation and conjecture? Of course, but it’s not unfounded. As I mentioned earlier, some of the prominent Microsoft watchers are also reporting similar rumors. However, Microsoft itself has even hinted at this future with their recent organizational changes and by telling developers “if you want to develop for Xbox One, start developing for Windows 8 now.” I think this pretty clearly paints the following picture: Microsoft is committed to the “modern” user interface paradigm. Microsoft is changing their release cadence (for all products, not just operating systems) to be faster and more modular. Microsoft is going to continue to unify their OS platforms both from a consumer perspective and a developer perspective. While this direction will certainly concern some people it will excite many others. Microsoft’s biggest failing has always been following through with a strong and sustained marketing strategy that presents a consistent view point and highlights what this unified and connected experience looks like and how it benefits consumers and enterprises. We’ve started to see some of this over the last few years, but it needs to continue and become more aggressive and consistent. In the long run, I think Microsoft will be able to pull all of these technologies and devices together into one seamless ecosystem. It isn’t going to happen overnight, but my prediction is that we will be there by the end of 2016. As both a consumer and a developer, I, for one, am excited about the future of Microsoft.

    Read the article

  • NHibernate Conventions

    - by Ricardo Peres
    Introduction It seems that nowadays everyone loves conventions! Not the ones that you go to, but the ones that you use, that is! It just happens that NHibernate also supports conventions, and we’ll see exactly how. Conventions in NHibernate are supported in two ways: Naming of tables and columns when not explicitly indicated in the mappings; Full domain mapping. Naming of Tables and Columns Since always NHibernate has supported the concept of a naming strategy. A naming strategy in NHibernate converts class and property names to table and column names and vice-versa, when a name is not explicitly supplied. In concrete, it must be a realization of the NHibernate.Cfg.INamingStrategy interface, of which NHibernate includes two implementations: DefaultNamingStrategy: the default implementation, where each column and table are mapped to identically named properties and classes, for example, “MyEntity” will translate to “MyEntity”; ImprovedNamingStrategy: underscores (_) are used to separate Pascal-cased fragments, for example, entity “MyEntity” will be mapped to a “my_entity” table. The naming strategy can be defined at configuration level (the Configuration instance) by calling the SetNamingStrategy method: 1: cfg.SetNamingStrategy(ImprovedNamingStrategy.Instance); Both the DefaultNamingStrategy and the ImprovedNamingStrategy classes offer singleton instances in the form of Instance static fields. DefaultNamingStrategy is the one NHibernate uses, if you don’t specify one. Domain Mapping In mapping by code, we have the choice of relying on conventions to do the mapping automatically. This means a class will inspect our classes and decide how they will relate to the database objects. The class that handles conventions is NHibernate.Mapping.ByCode.ConventionModelMapper, a specialization of the base by code mapper, NHibernate.Mapping.ByCode.ModelMapper. The ModelMapper relies on an internal SimpleModelInspector to help it decide what and how to map, but the mapper lets you override its decisions.  You apply code conventions like this: 1: //pick the types that you want to map 2: IEnumerable<Type> types = Assembly.GetExecutingAssembly().GetExportedTypes(); 3:  4: //conventions based mapper 5: ConventionModelMapper mapper = new ConventionModelMapper(); 6:  7: HbmMapping mapping = mapper.CompileMappingFor(types); 8:  9: //the one and only configuration instance 10: Configuration cfg = ...; 11: cfg.AddMapping(mapping); This is a very simple example, it lacks, at least, the id generation strategy, which you can add by adding an event handler like this: 1: mapper.BeforeMapClass += (IModelInspector modelInspector, Type type, IClassAttributesMapper classCustomizer) => 2: { 3: classCustomizer.Id(x => 4: { 5: //set the hilo generator 6: x.Generator(Generators.HighLow); 7: }); 8: }; The mapper will fire events like this whenever it needs to get information about what to do. And basically this is all it takes to automatically map your domain! It will correctly configure many-to-one and one-to-many relations, choosing bags or sets depending on your collections, will get the table and column names from the naming strategy we saw earlier and will apply the usual defaults to all properties, such as laziness and fetch mode. However, there is at least one thing missing: many-to-many relations. The conventional mapper doesn’t know how to find and configure them, which is a pity, but, alas, not difficult to overcome. To start, for my projects, I have this rule: each entity exposes a public property of type ISet<T> where T is, of course, the type of the other endpoint entity. Extensible as it is, NHibernate lets me implement this very easily: 1: mapper.IsOneToMany((MemberInfo member, Boolean isLikely) => 2: { 3: Type sourceType = member.DeclaringType; 4: Type destinationType = member.GetMemberFromDeclaringType().GetPropertyOrFieldType(); 5:  6: //check if the property is of a generic collection type 7: if ((destinationType.IsGenericCollection() == true) && (destinationType.GetGenericArguments().Length == 1)) 8: { 9: Type destinationEntityType = destinationType.GetGenericArguments().Single(); 10:  11: //check if the type of the generic collection property is an entity 12: if (mapper.ModelInspector.IsEntity(destinationEntityType) == true) 13: { 14: //check if there is an equivalent property on the target type that is also a generic collection and points to this entity 15: PropertyInfo collectionInDestinationType = destinationEntityType.GetProperties().Where(x => (x.PropertyType.IsGenericCollection() == true) && (x.PropertyType.GetGenericArguments().Length == 1) && (x.PropertyType.GetGenericArguments().Single() == sourceType)).SingleOrDefault(); 16:  17: if (collectionInDestinationType != null) 18: { 19: return (false); 20: } 21: } 22: } 23:  24: return (true); 25: }); 26:  27: mapper.IsManyToMany((MemberInfo member, Boolean isLikely) => 28: { 29: //a relation is many to many if it isn't one to many 30: Boolean isOneToMany = mapper.ModelInspector.IsOneToMany(member); 31: return (!isOneToMany); 32: }); 33:  34: mapper.BeforeMapManyToMany += (IModelInspector modelInspector, PropertyPath member, IManyToManyMapper collectionRelationManyToManyCustomizer) => 35: { 36: Type destinationEntityType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 37: //set the mapping table column names from each source entity name plus the _Id sufix 38: collectionRelationManyToManyCustomizer.Column(destinationEntityType.Name + "_Id"); 39: }; 40:  41: mapper.BeforeMapSet += (IModelInspector modelInspector, PropertyPath member, ISetPropertiesMapper propertyCustomizer) => 42: { 43: if (modelInspector.IsManyToMany(member.LocalMember) == true) 44: { 45: propertyCustomizer.Key(x => x.Column(member.LocalMember.DeclaringType.Name + "_Id")); 46:  47: Type sourceType = member.LocalMember.DeclaringType; 48: Type destinationType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 49: IEnumerable<String> names = new Type[] { sourceType, destinationType }.Select(x => x.Name).OrderBy(x => x); 50:  51: //set inverse on the relation of the alphabetically first entity name 52: propertyCustomizer.Inverse(sourceType.Name == names.First()); 53: //set mapping table name from the entity names in alphabetical order 54: propertyCustomizer.Table(String.Join("_", names)); 55: } 56: }; We have to understand how the conventions mapper thinks: For each collection of entities found, it will ask the mapper if it is a one-to-many; in our case, if the collection is a generic one that has an entity as its generic parameter, and the generic parameter type has a similar collection, then it is not a one-to-many; Next, the mapper will ask if the collection that it now knows is not a one-to-many is a many-to-many; Before a set is mapped, if it corresponds to a many-to-many, we set its mapping table. Now, this is tricky: because we have no way to maintain state, we sort the names of the two endpoint entities and we combine them with a “_”; for the first alphabetical entity, we set its relation to inverse – remember, on a many-to-many relation, only one endpoint must be marked as inverse; finally, we set the column name as the name of the entity with an “_Id” suffix; Before the many-to-many relation is processed, we set the column name as the name of the other endpoint entity with the “_Id” suffix, as we did for the set. And that’s it. With these rules, NHibernate will now happily find and configure many-to-many relations, as well as all the others. You can wrap this in a new conventions mapper class, so that it is more easily reusable: 1: public class ManyToManyConventionModelMapper : ConventionModelMapper 2: { 3: public ManyToManyConventionModelMapper() 4: { 5: base.IsOneToMany((MemberInfo member, Boolean isLikely) => 6: { 7: return (this.IsOneToMany(member, isLikely)); 8: }); 9:  10: base.IsManyToMany((MemberInfo member, Boolean isLikely) => 11: { 12: return (this.IsManyToMany(member, isLikely)); 13: }); 14:  15: base.BeforeMapManyToMany += this.BeforeMapManyToMany; 16: base.BeforeMapSet += this.BeforeMapSet; 17: } 18:  19: protected virtual Boolean IsManyToMany(MemberInfo member, Boolean isLikely) 20: { 21: //a relation is many to many if it isn't one to many 22: Boolean isOneToMany = this.ModelInspector.IsOneToMany(member); 23: return (!isOneToMany); 24: } 25:  26: protected virtual Boolean IsOneToMany(MemberInfo member, Boolean isLikely) 27: { 28: Type sourceType = member.DeclaringType; 29: Type destinationType = member.GetMemberFromDeclaringType().GetPropertyOrFieldType(); 30:  31: //check if the property is of a generic collection type 32: if ((destinationType.IsGenericCollection() == true) && (destinationType.GetGenericArguments().Length == 1)) 33: { 34: Type destinationEntityType = destinationType.GetGenericArguments().Single(); 35:  36: //check if the type of the generic collection property is an entity 37: if (this.ModelInspector.IsEntity(destinationEntityType) == true) 38: { 39: //check if there is an equivalent property on the target type that is also a generic collection and points to this entity 40: PropertyInfo collectionInDestinationType = destinationEntityType.GetProperties().Where(x => (x.PropertyType.IsGenericCollection() == true) && (x.PropertyType.GetGenericArguments().Length == 1) && (x.PropertyType.GetGenericArguments().Single() == sourceType)).SingleOrDefault(); 41:  42: if (collectionInDestinationType != null) 43: { 44: return (false); 45: } 46: } 47: } 48:  49: return (true); 50: } 51:  52: protected virtual new void BeforeMapManyToMany(IModelInspector modelInspector, PropertyPath member, IManyToManyMapper collectionRelationManyToManyCustomizer) 53: { 54: Type destinationEntityType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 55: //set the mapping table column names from each source entity name plus the _Id sufix 56: collectionRelationManyToManyCustomizer.Column(destinationEntityType.Name + "_Id"); 57: } 58:  59: protected virtual new void BeforeMapSet(IModelInspector modelInspector, PropertyPath member, ISetPropertiesMapper propertyCustomizer) 60: { 61: if (modelInspector.IsManyToMany(member.LocalMember) == true) 62: { 63: propertyCustomizer.Key(x => x.Column(member.LocalMember.DeclaringType.Name + "_Id")); 64:  65: Type sourceType = member.LocalMember.DeclaringType; 66: Type destinationType = member.LocalMember.GetPropertyOrFieldType().GetGenericArguments().First(); 67: IEnumerable<String> names = new Type[] { sourceType, destinationType }.Select(x => x.Name).OrderBy(x => x); 68:  69: //set inverse on the relation of the alphabetically first entity name 70: propertyCustomizer.Inverse(sourceType.Name == names.First()); 71: //set mapping table name from the entity names in alphabetical order 72: propertyCustomizer.Table(String.Join("_", names)); 73: } 74: } 75: } Conclusion Of course, there is much more to mapping than this, I suggest you look at all the events and functions offered by the ModelMapper to see where you can hook for making it behave the way you want. If you need any help, just let me know!

    Read the article

  • How I Work: A Cloud Developer's Workstation

    - by BuckWoody
    I've written here a little about how I work during the day, including things like using a stand-up desk (still doing that, by the way). Inspired by a Twitter conversation yesterday, I thought I might explain how I set up my computing environment. First, a couple of important points. I work in Cloud Computing, specifically (but not limited to) Windows Azure. Windows Azure has features to run a Virtual Machine (IaaS), run code without having to control a Virtual Machine (PaaS) and use databases, video streaming, Hadoop and more (a kind of SaaS for tech pros). As such, my designs run the gamut of on-premises, VM's in the Cloud, and software that I write for a platform. I focus on data primarily, meaning that I design a lot of systems that use an RDBMS (like SQL Server or Windows Azure Databases) or a NoSQL approach (MongoDB on Azure or large-scale Key-Value Pairs in Table storage) and even Hadoop and R, and also Cloud Numerics in F#. All that being said, those things inform my choices below. Hardware I have a Lenovo X220 tablet/laptop which I really like a great deal - it's a light, tough, extremely fast system. When I travel, that's the system I take. It has 8GB of RAM, and an SSD drive. I sometimes use that to develop or work at a client's site, on the road, or in the living room when I'm not in my home office. My main system is a GateWay DX430017 - I've maxed it out on RAM, and I have two 1TB drives in it. It's not only my workstation for work; I leave it on all the time and it streams our videos, music and books. I have about 3400 e-books, and I've just started using Calibre to stream the library. I run Windows 8 on it so I can set up Hyper-V images, since Windows Azure allows me to move regular Hyper-V disks back and forth to the Cloud. That's where all my "servers" are, when I have to use an IaaS approach. The reason I use a desktop-style system rather than a laptop only approach is that a good part of my job is setting up architectures to solve really big, complex problems. That means I have to simulate entire networks on-premises, along with the Hybrid Cloud approach I use a lot. I need a lot of disk space and memory for that, and I use two huge monitors on my stand-up desk. I could probably use 10 monitors if I had the room for them. Also, since it's our home system as well, I leave it on all the time and it doesn't travel.   Software For the software for my systems, it's important to keep in mind that I not only write code, but I design databases, teach, present, and create Linux and other environments. Windows 8 - While the jury is out for me on the new interface, the context-sensitive search, integrated everything, and speed is just hands-down the right choice. I've evaluated a server OS, Linux, even an Apple, but I just am not as efficient on those as I am with Windows 8. Visual Studio Ultimate - I develop primarily in .NET (C# and F# mostly) and I use the Team Foundation Server in the cloud, and I'm asked to do everything from UI to Services, so I need everything. Windows Azure SDK, Windows Azure Training Kit - I need the first to set up my Azure PaaS coding, and the second has all the info I need for PaaS, IaaS and SaaS. This is primarily how I get paid. :) SQL Server Developer Edition - While I might install Oracle, MySQL and Postgres on my VM's, the "outside" environment is SQL Server for an RDBMS. I install the Developer Edition because it has the same features as Enterprise Edition, and comes with all the client tools and documentation. Microsoft Office -  Even if I didn't work here, this is what I would use. I've just grown too accustomed to doing business this way to change, so my advice is always "use what works", and this does. The parts I use are: OneNote (and a Math Add-in) - I do almost everything - and I mean everything in OneNote. I can code, do high-end math, present, design, collaborate and more. All my notebooks are on my Skydrive. I can use them from any system, anywhere. If you take the time to learn this program, you'll be hooked. Excel with PowerPivot - Don't make that face. Excel is the world's database, and every Data Scientist I know - even the ones where I teach at the University of Washington - know it, use it, and love it.  Outlook - Primary communications, CRM and contact tool. I have all of my social media hooked up to it, so when I get an e-mail from you, I see everything, see all the history we've had on e-mail, find you on a map and more. Lync - I was fine with LiveMeeting, although it has it's moments. For me, the Lync client is tres-awesome. I use this throughout my day, present on it, stay in contact with colleagues and the folks on the dev team (who wish I didn't have it) and more.  PowerPoint - Once again, don't make that face. Whenever I see someone complaining about PowerPoint, I have 100% of the time found they don't know how to use it. If you suck at presenting or creating content, don't blame PowerPoint. Works great on my machine. :) Zoomit - Magnifier - On Windows 7 (and 8 as well) there's a built-in magnifier, but I install Zoomit out of habit. It enlarges the screen. If you don't use one of these tools (or their equivalent on some other OS) then you're presenting/teaching wrong, and you should stop presenting/teaching until you get them and learn how to show people what you can see on your tiny, tiny monitor. :) Cygwin - Unix for Windows. OK, that's not true, but it's mostly that. I grew up on mainframes and Unix (IBM and HP, thank you) and I can't imagine life without  sed, awk, grep, vim, and bash. I also tend to take a lot of the "Science" and "Development" and "Database" packages in it as well. PuTTY - Speaking of Unix, when I need to connect to my Linux VM's in Windows Azure, I want to do it securely. This is the tool for that. Notepad++ - Somewhere between torturing myself in vim and luxuriating in OneNote is Notepad++. Everyone has a favorite text editor; this one is mine. Too many features to name, and it's free. Browsers - I install Chrome, Firefox and of course IE. I know it's in vogue to rant on IE, but I tend to think for myself a great deal, and I've had few (none) problems with it. The others I have for the haterz that make sites that won't run in IE. Visio - I've used a lot of design packages, but none have the extreme meta-data edit capabilities of Visio. I don't use this all the time - it can be rather heavy, but what it does it does really well. I also present this way when I'm not using PowerPoint. Yup, I just bring up Visio and diagram away as I'm chatting with clients. Depending on what we're covering, this can be the right tool for that. Tweetdeck - The AIR one, not that new disaster they came out with. I live on social media, since you, dear readers, are my cube-mates. When I get tired of you all, I close Tweetdeck. When I need help or someone needs help from me, or if I want to see a picture of a cat while I'm coding, I bring it up. It's up most all day and night. Windows Media Player - I listen to Trance or Classical when I code, and I find music managers overbearing and extra. I just use what comes in the box, and it works great for me. R - F# and Cloud Numerics now allows me to load in R libraries (yay!) and I use this for statistical work on big data loads. Microsoft Math - One of the most amazing, free, rich, amazing, awesome, amazing calculators out there. I get the 64-bit version for quick math conversions, plots and formula-checks. Python - I know, right? Who knew that the scientific community loved Python so much. But they do. I use 2.7; not as much runs with 3+. I also use IronPython in Visual Studio, or I edit in Notepad++ Camstudio recorder - Windows PSR - In much of my training, and all of my teaching at the UW, I need to show a process on a screen. Camstudio records screen and voice, and it's free. If I need to make static training, I use the Windows PSR tool that's built right in. It's ostensibly for problem duplication, but I use it to record for training.   OK - your turn. Post a link to your blog entry below, and tell me how you set your system up.  

    Read the article

  • C#/.NET &ndash; Finding an Item&rsquo;s Index in IEnumerable&lt;T&gt;

    - by James Michael Hare
    Sorry for the long blogging hiatus.  First it was, of course, the holidays hustle and bustle, then my brother and his wife gave birth to their son, so I’ve been away from my blogging for two weeks. Background: Finding an item’s index in List<T> is easy… Many times in our day to day programming activities, we want to find the index of an item in a collection.  Now, if we have a List<T> and we’re looking for the item itself this is trivial: 1: // assume have a list of ints: 2: var list = new List<int> { 1, 13, 42, 64, 121, 77, 5, 99, 132 }; 3:  4: // can find the exact item using IndexOf() 5: var pos = list.IndexOf(64); This will return the position of the item if it’s found, or –1 if not.  It’s easy to see how this works for primitive types where equality is well defined.  For complex types, however, it will attempt to compare them using EqualityComparer<T>.Default which, in a nutshell, relies on the object’s Equals() method. So what if we want to search for a condition instead of equality?  That’s also easy in a List<T> with the FindIndex() method: 1: // assume have a list of ints: 2: var list = new List<int> { 1, 13, 42, 64, 121, 77, 5, 99, 132 }; 3:  4: // finds index of first even number or -1 if not found. 5: var pos = list.FindIndex(i => i % 2 == 0);   Problem: Finding an item’s index in IEnumerable<T> is not so easy... This is all well and good for lists, but what if we want to do the same thing for IEnumerable<T>?  A collection of IEnumerable<T> has no indexing, so there’s no direct method to find an item’s index.  LINQ, as powerful as it is, gives us many tools to get us this information, but not in one step.  As with almost any problem involving collections, there are several ways to accomplish the same goal.  And once again as with almost any problem involving collections, the choice of the solution somewhat depends on the situation. So let’s look at a few possible alternatives.  I’m going to express each of these as extension methods for simplicity and consistency. Solution: The TakeWhile() and Count() combo One of the things you can do is to perform a TakeWhile() on the list as long as your find condition is not true, and then do a Count() of the items it took.  The only downside to this method is that if the item is not in the list, the index will be the full Count() of items, and not –1.  So if you don’t know the size of the list beforehand, this can be confusing. 1: // a collection of extra extension methods off IEnumerable<T> 2: public static class EnumerableExtensions 3: { 4: // Finds an item in the collection, similar to List<T>.FindIndex() 5: public static int FindIndex<T>(this IEnumerable<T> list, Predicate<T> finder) 6: { 7: // note if item not found, result is length and not -1! 8: return list.TakeWhile(i => !finder(i)).Count(); 9: } 10: } Personally, I don’t like switching the paradigm of not found away from –1, so this is one of my least favorites.  Solution: Select with index Many people don’t realize that there is an alternative form of the LINQ Select() method that will provide you an index of the item being selected: 1: list.Select( (item,index) => do something here with the item and/or index... ) This can come in handy, but must be treated with care.  This is because the index provided is only as pertains to the result of previous operations (if any).  For example: 1: // assume have a list of ints: 2: var list = new List<int> { 1, 13, 42, 64, 121, 77, 5, 99, 132 }; 3:  4: // you'd hope this would give you the indexes of the even numbers 5: // which would be 2, 3, 8, but in reality it gives you 0, 1, 2 6: list.Where(item => item % 2 == 0).Select((item,index) => index); The reason the example gives you the collection { 0, 1, 2 } is because the where clause passes over any items that are odd, and therefore only the even items are given to the select and only they are given indexes. Conversely, we can’t select the index and then test the item in a Where() clause, because then the Where() clause would be operating on the index and not the item! So, what we have to do is to select the item and index and put them together in an anonymous type.  It looks ugly, but it works: 1: // extensions defined on IEnumerable<T> 2: public static class EnumerableExtensions 3: { 4: // finds an item in a collection, similar to List<T>.FindIndex() 5: public static int FindIndex<T>(this IEnumerable<T> list, Predicate<T> finder) 6: { 7: // if you don't name the anonymous properties they are the variable names 8: return list.Select((item, index) => new { item, index }) 9: .Where(p => finder(p.item)) 10: .Select(p => p.index + 1) 11: .FirstOrDefault() - 1; 12: } 13: }     So let’s look at this, because i know it’s convoluted: First Select() joins the items and their indexes into an anonymous type. Where() filters that list to only the ones matching the predicate. Second Select() picks the index of the matches and adds 1 – this is to distinguish between not found and first item. FirstOrDefault() returns the first item found from the previous clauses or default (zero) if not found. Subtract one so that not found (zero) will be –1, and first item (one) will be zero. The bad thing is, this is ugly as hell and creates anonymous objects for each item tested until it finds the match.  This concerns me a bit but we’ll defer judgment until compare the relative performances below. Solution: Convert ToList() and use FindIndex() This solution is easy enough.  We know any IEnumerable<T> can be converted to List<T> using the LINQ extension method ToList(), so we can easily convert the collection to a list and then just use the FindIndex() method baked into List<T>. 1: // a collection of extension methods for IEnumerable<T> 2: public static class EnumerableExtensions 3: { 4: // find the index of an item in the collection similar to List<T>.FindIndex() 5: public static int FindIndex<T>(this IEnumerable<T> list, Predicate<T> finder) 6: { 7: return list.ToList().FindIndex(finder); 8: } 9: } This solution is simplicity itself!  It is very concise and elegant and you need not worry about anyone misinterpreting what it’s trying to do (as opposed to the more convoluted LINQ methods above). But the main thing I’m concerned about here is the performance hit to allocate the List<T> in the ToList() call, but once again we’ll explore that in a second. Solution: Roll your own FindIndex() for IEnumerable<T> Of course, you can always roll your own FindIndex() method for IEnumerable<T>.  It would be a very simple for loop which scans for the item and counts as it goes.  There’s many ways to do this, but one such way might look like: 1: // extension methods for IEnumerable<T> 2: public static class EnumerableExtensions 3: { 4: // Finds an item matching a predicate in the enumeration, much like List<T>.FindIndex() 5: public static int FindIndex<T>(this IEnumerable<T> list, Predicate<T> finder) 6: { 7: int index = 0; 8: foreach (var item in list) 9: { 10: if (finder(item)) 11: { 12: return index; 13: } 14:  15: index++; 16: } 17:  18: return -1; 19: } 20: } Well, it’s not quite simplicity, and those less familiar with LINQ may prefer it since it doesn’t include all of the lambdas and behind the scenes iterators that come with deferred execution.  But does having this long, blown out method really gain us much in performance? Comparison of Proposed Solutions So we’ve now seen four solutions, let’s analyze their collective performance.  I took each of the four methods described above and run them over 100,000 iterations of lists of size 10, 100, 1000, and 10000 and here’s the performance results.  Then I looked for targets at the begining of the list (best case), middle of the list (the average case) and not in the list (worst case as must scan all of the list). Each of the times below is the average time in milliseconds for one execution as computer over the 100,000 iterations: Searches Matching First Item (Best Case)   10 100 1000 10000 TakeWhile 0.0003 0.0003 0.0003 0.0003 Select 0.0005 0.0005 0.0005 0.0005 ToList 0.0002 0.0003 0.0013 0.0121 Manual 0.0001 0.0001 0.0001 0.0001   Searches Matching Middle Item (Average Case)   10 100 1000 10000 TakeWhile 0.0004 0.0020 0.0191 0.1889 Select 0.0008 0.0042 0.0387 0.3802 ToList 0.0002 0.0007 0.0057 0.0562 Manual 0.0002 0.0013 0.0129 0.1255   Searches Where Not Found (Worst Case)   10 100 1000 10000 TakeWhile 0.0006 0.0039 0.0381 0.3770 Select 0.0012 0.0081 0.0758 0.7583 ToList 0.0002 0.0012 0.0100 0.0996 Manual 0.0003 0.0026 0.0253 0.2514   Notice something interesting here, you’d think the “roll your own” loop would be the most efficient, but it only wins when the item is first (or very close to it) regardless of list size.  In almost all other cases though and in particular the average case and worst case, the ToList()/FindIndex() combo wins for performance, even though it is creating some temporary memory to hold the List<T>.  If you examine the algorithm, the reason why is most likely because once it’s in a ToList() form, internally FindIndex() scans the internal array which is much more efficient to iterate over.  Thus, it takes a one time performance hit (not including any GC impact) to create the List<T> but after that the performance is much better. Summary If you’re concerned about too many throw-away objects, you can always roll your own FindIndex() method, but for sheer simplicity and overall performance, using the ToList()/FindIndex() combo performs best on nearly all list sizes in the average and worst cases.    Technorati Tags: C#,.NET,Litte Wonders,BlackRabbitCoder,Software,LINQ,List

    Read the article

  • Customize Your WordPress Blog & Build an Audience

    - by Matthew Guay
    Want to quickly give your blog a fresh coat of paint and make it stand out from the pack?  Here’s how you can customize your WordPress blog and make it uniquely yours. WordPress offers many features that help you make your blog the best it can be.  Although it doesn’t offer as many customization features as full WordPress running on your own server, it still makes it easy to make your free blog as professional or cute as you like.  Here we’ll look at how you can customize features in your blog and build an audience. Personalize Your Blog WordPress make it easy to personalize your blog.  Most of the personalization options are available under the Appearance menu on the left.  Here we’ll look at how you can use most of these. Add New Theme WordPress is popular for the wide range of themes available for it.  While you cannot upload your own theme to your blog, you can choose from over 90 free themes currently available with more added all the time.  To change your theme, select the Themes page under Appearance. The Themes page will show random themes, but you can choose to view them in alphabetical order, by popularity, or how recently they were added.  Or, you can search for a theme by name or features. One neat way to find a theme that suites your needs is the Feature Filter.  Click the link on the right of the search button, and then select the options you want to make sure your theme has.  Click Apply Filters and WordPress will streamline your choices to themes that contain these features. Once you find a theme you like, click Preview under its name to see how your blog will look. This will open a popup that shows your blog with the new theme.  Click the Activate link in the top right corner of the popup if you want to keep this theme; otherwise, click the x in the top left corner to close the preview and continue your search for one you want.   Edit Current Theme Many of the themes on WordPress have customization options so you can make your blog stand out from others using the same theme.  The default theme Twenty Ten lets you customize both the header and background image, and many themes have similar options. To choose a new header image, select the Header page under Appearance.  Select one of the pre-installed images and click Save Changes, or upload your own image. If you upload an image larger than the size for the header, WordPress will let you crop it directly in the web interface.  Click Crop Header when you’ve selected the portion you want for the header of your blog. You can also customize your blog’s background from the Background page under Appearance.  You can upload an image for the background, or can enter a hex value of a color for a solid background.  If you’d rather visually choose a color, click Select a Color to open a color wheel that makes it easy to choose a nice color.  Click Save Changes when you’re done. Note: that all themes may not contain these customization options, but many are flexible.  You cannot edit the actual CSS of your theme on free WordPress blogs, but you you can purchase the Custom CSS Upgrade for $14.97/year to add this ability. Add Widgets With Extra Content Widgets are small addons for your blog, similar to Desktop Gadgets in Windows 7 or Dashboard widgets in Mac OS X.  You can add widgets to your blog to show recent Tweets, favorite Flickr pictures, popular articles, and more.  To add widgets to your blog, open the Widgets page under Appearance. You’ll see a variety of widgets available in the main white box.  Select one you want to add, and drag it to the widget area of your choice.  Different themes may offer different areas to place Widgets, such as the sidebar or footer. Most of the widgets offer configuration options.  Click the down arrow beside its name to edit it.  Set them up as you wish, and click Save on the bottom of the widget. Now we’ve got some nice dynamic content on our blog that’s automatically updated from the net. Choose Blog Extras By default, WordPress shows previews of websites when visitors hover over links on your blog, uses a special mobile theme when people visit from a mobile device, and shows related links to other blogs on the WordPress network at the end of your posts.  If you don’t like these features, you can disable them on the Extras page under Appearance. Build Your Audience Now that your blog is looking nice, we can make sure others will discover it.  WordPress makes it easy for you to make your site discoverable on search engines or social network, and even gives you the option to keep your site private if you’d prefer.  Open the Privacy page under Tools to change your site’s visibility.  By default, it will be indexed by search engines and be viewable to everyone.  You can also choose to leave your blog public but block search engines, or you can make it fully private. If you choose to make your blog private, you can enter up to 35 usernames of people you want to be able to see it.  Each private visitor must have a WordPress.com account so they can login.  If you need more than 35 private members, you can upgrade to allow unlimited private members for $29.97/year. Then, if you do want your site visible from search engines, one of the best ways to make sure your content is discovered by search engines is to register with their webmaster tools.  Once registered, you need to add your key to your site so the search engine will find and index it.  On the bottom of the Tools page, WordPress lets you enter your key from Google, Bing, and Yahoo! to make sure your site is discovered.  If you haven’t signed up with these tools yet, you can signup via the links on this page as well. Post Blog Updates to Social Networks Many people discover the sites they visit from friends and others via social networks.  WordPress makes it easy to automatically share links to your content on popular social networks.  To activate this feature, open the My Blogs page under Dashboard. Now, select the services you want to activate under the Publicize section.  This will automatically update Yahoo!, Twitter, and/or Facebook every time you publish a new post. You’ll have to authorize your connection with the social network.  With Twitter and Yahoo!, you can authorize them with only two clicks, but integrating with Facebook will take several steps.   If you’d rather share links yourself on social networks, you can get shortened URLs to your posts.  When you write a new post or edit an existing one, click the Get Shortlink button located underneath the post’s title. This will give you a small URL, usually 20 characters or less, that you can use to post on social networks such as Twitter.   This should help build your traffic, and if you want to see how many people are checking out your site, check out the stats on your Dashboard.  This shows a graph of how many people are visiting, and popular posts.  Click View All if you’d like more detailed stats including search engine terms that lead people to your blog. Conclusion Whether you’re looking to make a private blog for your group or publish a blog that’s read by millions around the world, WordPress is a great way to do it for free.  And with all of the personalization options, you can make your it memorable and exciting for your visitors. If you don’t have a blog, you can always signup for a free one from WordPress.com.  Also make sure to check out our article on how to Start Your Own Blog with WordPress. Similar Articles Productive Geek Tips Manage Your WordPress Blog Comments from Your Windows DesktopAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek SoftwareMake a Backup Copy of your Production Wordpress Blog on UbuntuOops! Sorry About the Feed Errors TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

    Read the article

  • [GEEK SCHOOL] Network Security 2: Preventing Disaster with User Account Control

    - by Ciprian Rusen
    In this second lesson in our How-To Geek School about securing the Windows devices in your network, we will talk about User Account Control (UAC). Users encounter this feature each time they need to install desktop applications in Windows, when some applications need administrator permissions in order to work and when they have to change different system settings and files. UAC was introduced in Windows Vista as part of Microsoft’s “Trustworthy Computing” initiative. Basically, UAC is meant to act as a wedge between you and installing applications or making system changes. When you attempt to do either of these actions, UAC will pop up and interrupt you. You may either have to confirm you know what you’re doing, or even enter an administrator password if you don’t have those rights. Some users find UAC annoying and choose to disable it but this very important security feature of Windows (and we strongly caution against doing that). That’s why in this lesson, we will carefully explain what UAC is and everything it does. As you will see, this feature has an important role in keeping Windows safe from all kinds of security problems. In this lesson you will learn which activities may trigger a UAC prompt asking for permissions and how UAC can be set so that it strikes the best balance between usability and security. You will also learn what kind of information you can find in each UAC prompt. Last but not least, you will learn why you should never turn off this feature of Windows. By the time we’re done today, we think you will have a newly found appreciation for UAC, and will be able to find a happy medium between turning it off completely and letting it annoy you to distraction. What is UAC and How Does it Work? UAC or User Account Control is a security feature that helps prevent unauthorized system changes to your Windows computer or device. These changes can be made by users, applications, and sadly, malware (which is the biggest reason why UAC exists in the first place). When an important system change is initiated, Windows displays a UAC prompt asking for your permission to make the change. If you don’t give your approval, the change is not made. In Windows, you will encounter UAC prompts mostly when working with desktop applications that require administrative permissions. For example, in order to install an application, the installer (generally a setup.exe file) asks Windows for administrative permissions. UAC initiates an elevation prompt like the one shown earlier asking you whether it is okay to elevate permissions or not. If you say “Yes”, the installer starts as administrator and it is able to make the necessary system changes in order to install the application correctly. When the installer is closed, its administrator privileges are gone. If you run it again, the UAC prompt is shown again because your previous approval is not remembered. If you say “No”, the installer is not allowed to run and no system changes are made. If a system change is initiated from a user account that is not an administrator, e.g. the Guest account, the UAC prompt will also ask for the administrator password in order to give the necessary permissions. Without this password, the change won’t be made. Which Activities Trigger a UAC Prompt? There are many types of activities that may trigger a UAC prompt: Running a desktop application as an administrator Making changes to settings and files in the Windows and Program Files folders Installing or removing drivers and desktop applications Installing ActiveX controls Changing settings to Windows features like the Windows Firewall, UAC, Windows Update, Windows Defender, and others Adding, modifying, or removing user accounts Configuring Parental Controls in Windows 7 or Family Safety in Windows 8.x Running the Task Scheduler Restoring backed-up system files Viewing or changing the folders and files of another user account Changing the system date and time You will encounter UAC prompts during some or all of these activities, depending on how UAC is set on your Windows device. If this security feature is turned off, any user account or desktop application can make any of these changes without a prompt asking for permissions. In this scenario, the different forms of malware existing on the Internet will also have a higher chance of infecting and taking control of your system. In Windows 8.x operating systems you will never see a UAC prompt when working with apps from the Windows Store. That’s because these apps, by design, are not allowed to modify any system settings or files. You will encounter UAC prompts only when working with desktop programs. What You Can Learn from a UAC Prompt? When you see a UAC prompt on the screen, take time to read the information displayed so that you get a better understanding of what is going on. Each prompt first tells you the name of the program that wants to make system changes to your device, then you can see the verified publisher of that program. Dodgy software tends not to display this information and instead of a real company name, you will see an entry that says “Unknown”. If you have downloaded that program from a less than trustworthy source, then it might be better to select “No” in the UAC prompt. The prompt also shares the origin of the file that’s trying to make these changes. In most cases the file origin is “Hard drive on this computer”. You can learn more by pressing “Show details”. You will see an additional entry named “Program location” where you can see the physical location on your hard drive, for the file that’s trying to perform system changes. Make your choice based on the trust you have in the program you are trying to run and its publisher. If a less-known file from a suspicious location is requesting a UAC prompt, then you should seriously consider pressing “No”. What’s Different About Each UAC Level? Windows 7 and Windows 8.x have four UAC levels: Always notify – when this level is used, you are notified before desktop applications make changes that require administrator permissions or before you or another user account changes Windows settings like the ones mentioned earlier. When the UAC prompt is shown, the desktop is dimmed and you must choose “Yes” or “No” before you can do anything else. This is the most secure and also the most annoying way to set UAC because it triggers the most UAC prompts. Notify me only when programs/apps try to make changes to my computer (default) – Windows uses this as the default for UAC. When this level is used, you are notified before desktop applications make changes that require administrator permissions. If you are making system changes, UAC doesn’t show any prompts and it automatically gives you the necessary permissions for making the changes you desire. When a UAC prompt is shown, the desktop is dimmed and you must choose “Yes” or “No” before you can do anything else. This level is slightly less secure than the previous one because malicious programs can be created for simulating the keystrokes or mouse moves of a user and change system settings for you. If you have a good security solution in place, this scenario should never occur. Notify me only when programs/apps try to make changes to my computer (do not dim my desktop) – this level is different from the previous in in the fact that, when the UAC prompt is shown, the desktop is not dimmed. This decreases the security of your system because different kinds of desktop applications (including malware) might be able to interfere with the UAC prompt and approve changes that you might not want to be performed. Never notify – this level is the equivalent of turning off UAC. When using it, you have no protection against unauthorized system changes. Any desktop application and any user account can make system changes without your permission. How to Configure UAC If you would like to change the UAC level used by Windows, open the Control Panel, then go to “System and Security” and select “Action Center”. On the column on the left you will see an entry that says “Change User Account Control settings”. The “User Account Control Settings” window is now opened. Change the position of the UAC slider to the level you want applied then press “OK”. Depending on how UAC was initially set, you may receive a UAC prompt requiring you to confirm this change. Why You Should Never Turn Off UAC If you want to keep the security of your system at decent levels, you should never turn off UAC. When you disable it, everything and everyone can make system changes without your consent. This makes it easier for all kinds of malware to infect and take control of your system. It doesn’t matter whether you have a security suite or antivirus installed or third-party antivirus, basic common-sense measures like having UAC turned on make a big difference in keeping your devices safe from harm. We have noticed that some users disable UAC prior to setting up their Windows devices and installing third-party software on them. They keep it disabled while installing all the software they will use and enable it when done installing everything, so that they don’t have to deal with so many UAC prompts. Unfortunately this causes problems with some desktop applications. They may fail to work after you enable UAC. This happens because, when UAC is disabled, the virtualization techniques UAC uses for your applications are inactive. This means that certain user settings and files are installed in a different place and when you turn on UAC, applications stop working because they should be placed elsewhere. Therefore, whatever you do, do not turn off UAC completely! Coming up next … In the next lesson you will learn about Windows Defender, what this tool can do in Windows 7 and Windows 8.x, what’s different about it in these operating systems and how it can be used to increase the security of your system.

    Read the article

  • Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

    - by smisner
    Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system. The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me. At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach. Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements. My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work. Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way. DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal. Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info: You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client. You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features. I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically. When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions: On the Choose the installation you want page of the installation wizard, I chose Server Farm. On the Server Type page, I chose Complete. At the end of the installation, I did not run the configuration wizard. Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end. It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective. I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed: Install SQL Server 2008 R2 to get a database engine instance installed. Run the SharePoint configuration wizard to set up the SharePoint databases. In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization. Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment. I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon. Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment. I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Windows Azure Evolution - Web Sites (aka Antares) Part 1

    - by Shaun
    This is the 3rd post of my Windows Azure Evolution series, focus on the new features and enhancement which was alone with the Windows Azure Platform Upgrade June 2012, announced at the MEET Windows Azure event on 7th June. In the first post I introduced the new preview developer portal and how to works for the existing features such as cloud services, storages and SQL databases. In the second one I talked about the Windows Azure .NET SDK 1.7 on the latest Visual Studio 2012 RC on Windows 8. From this one I will begin to introduce some new features. Now let’s have a look on the first one of them, Windows Azure Web Sites.   Overview Windows Azure Web Sites (WAWS), as known as Antares, was a new feature still in preview stage in this upgrade. It allows people to quickly and easily deploy websites to a highly scalable cloud environment, uses the languages and open source apps of the choice then deploy such as FTP, Git and TFS. It also can be integrated with Windows Azure services like SQL Database, Caching, CDN and Storage easily. After read its introduction we may have a question: since we can deploy a website from both cloud service web role and web site, what’s the different between them? So, let’s have a quick compare.   CLOUD SERVICE WEB SITE OS Windows Server Windows Server Virtualization Windows Azure Virtual Machine Windows Azure Virtual Machine Host IIS IIS Platform ASP.NET WebForm, ASP.NET MVC, WCF ASP.NET WebForm, ASP.NET MVC, PHP Language C#, VB.NET C#, VB.NET, PHP Database SQL Database SQL Database, MySQL Architecture Multi layered, background worker, message queuing, etc.. Simple website with backend database. VS Project Windows Azure Cloud Service ASP.NET Web Form, ASP.NET MVC, etc.. Out-of-box Gallery (none) Drupal, DotNetNuke, WordPress, etc.. Deployment Package upload, Visual Studio publish FTP, Git, TFS, WebMatrix Compute Mode Dedicate VM Shared Across VMs, Dedicate VM Scale Scale up, scale out Scale up, scale out As you can see, there are many difference between the cloud service and web site, but the main point is that, the cloud service focus on those complex architecture web application. For example, if you want to build a website with frontend layer, middle business layer and data access layer, with some background worker process connected through the message queue, then you should better use cloud service, since it provides full control of your code and application. But if you just want to build a personal blog or a  business portal, then you can use the web site. Since the web site have many galleries, you can create them even without any coding and configuration. David Pallmann have an awesome figure explains the benefits between the could service, web site and virtual machine.   Create a Personal Blog in Web Site from Gallery As I mentioned above, one of the big feature in WAWS is to build a website from an existing gallery, which means we don’t need to coding and configure. What we need to do is open the windows azure developer portal and click the NEW button, select WEB SITE and FROM GALLERY. In the popping up windows there are many websites we can choose to use. For example, for personal blog there are Orchard CMS, WordPress; for CMS there are DotNetNuke, Drupal 7, mojoPortal. Let’s select WordPress and click the next button. The next step is to configure the web site. We will need to specify the DNS name and select the subscription and region. Since the WordPress uses MySQL as its backend database, we also need to create a MySQL database as well. Windows Azure Web Sites utilize ClearDB to host the MySQL databases. You cannot create a MySQL database directly from SQL Databases section. Finally, since we selected to create a new MySQL database we need to specify the database name and region in the last step. Also we need to accept the ClearDB’s terms as well. Then windows azure platform will download the WordPress codes and deploy the MySQL database and website. Then it will be ready to use. Select the website and click the BROWSE button, the WordPress administration page will be shown. After configured the WordPress here is my personal web blog on the cloud. It took me no more than 10 minutes to establish without any coding.   Monitor, Configure, Scale and Linked Resources Let’s click into the website I had just created in the portal and have a look on what we can do. In the website details page where are five sections. - Dashboard The overall information about this website, such as the basic usage status, public URL, compute mode, FTP address, subscription and links that we can specify the deployment credentials, TFS and Git publish setting, etc.. - Monitor Some status information such as the CPU usage, memory usage etc., errors, etc.. We can add more metrics by clicking the ADD METRICS button and the bottom as well. - Configure Here we can set the configurations of our website such as the .NET and PHP runtime version, diagnostics settings, application settings and the IIS default documents. - Scale This is something interesting. In WAWS there are two compute mode or called web site mode. One is “shared”, which means our website will be shared with other web sites in a group of windows azure virtual machines. Each web site have its own process (w3wp.exe) with some sandbox technology to isolate from others. When we need to scaling-out our web site in shared mode, we actually increased the working process count. Hence in shared mode we cannot specify the virtual machine size since they are shared across all web sites. This is a little bit different than the scaling mode of the cloud service (hosted service web role and worker role). The other mode called “dedicate”, which means our web site will use the whole windows azure virtual machine. This is the same hosting behavior as cloud service web role. In web role it will be deployed on the virtual machines we specified and all of them are only used by us. In web sites dedicate mode, it’s the same. In this mode when we scaling-out our web site we will use more virtual machines, and each of them will only host our own website. And we can specify the virtual machine size in this mode. In the developer portal we can select which mode we are using from the scale section. In shared mode we can only specify the instance count, but in dedicate mode we can specify the instance size as well as the instance count. - Linked Resource The MySQL database created alone with the creation of our WordPress web site is a linked resource. We can add more linked resources in this section.   Pricing For the web site itself, since this feature is in preview period if you are using shared mode, then you will get free up to 10 web sites. But if you are using dedicate mode, the price would be the virtual machines you are using. For example, if you are using dedicate and configured two middle size virtual machines then you will pay $230.40 per month. If there is SQL Database linked to your web site then they will be charged separately based on the Pay-As-You-Go price. For example a 1GB web edition database costs $9.99 per month. And the bandwidth will be charged as well. For example 10GB outbound data transfer costs $1.20 per month. For more information about the pricing please have a look at the windows azure pricing page.   Summary Windows Azure Web Sites gives us easier and quicker way to create, develop and deploy website to window azure platform. Comparing with the cloud service web role, the WAWS have many out-of-box gallery we can use directly. So if you just want to build a blog, CMS or business portal you don’t need to learn ASP.NET, you don’t need to learn how to configure DotNetNuke, you don’t need to learn how to prepare PHP and MySQL. By using WAWS gallery you can establish a website within 10 minutes without any lines of code. But in some cases we do need to code by ourselves. We may need to tweak the layout of our pages, or we may have a traditional ASP.NET or PHP web application which needed to migrated to the cloud. Besides the gallery WAWS also provides many features to download, upload code. It also provides the feature to integrate with some version control services such as TFS and Git. And it also provides the deploy approaches through FTP and Web Deploy. In the next post I will demonstrate how to use WebMatrix to download and modify the website, and how to use TFS and Git to deploy automatically one our code changes committed.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • CodePlex Daily Summary for Monday, March 19, 2012

    CodePlex Daily Summary for Monday, March 19, 2012Popular ReleasesHarness: Harness 2.0.1: working on Windows 7 (x64) (not used shell32.dll) Speed ​​up operation Vista/IE7 support (x86 and x64) Minor bug fixesSCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...Krempel's Windows Phone 7 project: DelayLoadImage release: For documentation check; http://thewp7dev.wordpress.com The source code depends on the HTMLAgilityPack wich can be downloaded here http://htmlagilitypack.codeplex.com/SourceControl/changeset/changes/94773. And the System.Xml.XPath.dll wich is part of the Silverlight SDK and located in "C:\Program Files (x86)\Microsoft SDKs\Silverlight\v4.0\Libraries\Client" or in "C:\Program Files\Microsoft SDKs\Silverlight\v4.0\Libraries\Client".SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 11: 1. added process visualizer to show the internal process model of SQL Server through hierachical chart. 2. fixed a few bugs, sorry.WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionDaun Management Studio: Daun Management Studio 0.1 (Alpha Version): These are these the alpha application packages for Daun Management Studio to manage MongoDB Server. Please visit our official website http://www.daun-project.comRiP-Ripper & PG-Ripper: RiP-Ripper 2.9.28: changes NEW: Added Support for "PixHub.eu" linksSmartNet: V1.0.0.0: DY SmartNet ?????? V1.0callisto: callisto 2.0.21: Added an option to disable local host detection.MyRouter (Virtual WiFi Router): MyRouter 1.0.6: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valuePulse: Pulse Beta 4: This version is still in development but should include: Logging and error handling have been greatly improved. If you run into an error or Pulse crashes make sure to check the Log folder for a recently modified log file so you can report the details of the issue A bunch of new features for the Wallbase.cc provider. Cleaner separation between inputs, downloading and output. Input and downloading are fairly clean now but outputs are still mixed up in the mix which I'm trying to resolve ...Google Books Downloader for Windows: Google Books Downloader-2.0.0.0.: Google Books DownloaderFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????,????1M,????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????,??????、????????????????。 ● AcDown???????????????????????????,???,???????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDo...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Release Candidate: Your feedback is welcome - and this is your last chance to get your fixes in for this version! Includes installer for both Feature Server extension and Desktop extension, enhanced functionality for the Desktop tools, and enhanced built-in Javascript Editor for the Feature Server component. This release candidate includes fixes to beta 4 that accommodate domain users for setting up the Server Component, and fixes for reporting/uploading references tracked in the revision table. See Code In-P...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...Windows Azure Toolkit for Windows 8: Windows Azure Toolkit for Windows 8 Consumer Prv: Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.1Minor updates to setup experience: Check for WebPI before install Dependency Check updated to support the following VS 11 and VS 2010 SKUs Ultimate, Premium, Professional and Express Certs Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.0 Please download this for Windows Azure Toolkit for Windows 8 functionality on Windows 8 Consumer Preview. The core features of the toolkit include:...Facebook Graph Toolkit: Facebook Graph Toolkit 3.0: ships with JSON Toolkit v3.0, offering parse speed up to 10 times of last version supports Facebook's new auth dialog supports new extend access token endpoint new example Page Tab app filter Graph Api connections using dates fixed bugs in Page Tab appsScintillaNET: ScintillaNET 2.4: 3/12/2012 Jacob Slusser Added support for annotations. Issues Fixed with this Release Issue # Title 25012 25012 25018 25018 25023 25023 25014 25014 New ProjectsAlt Info Revised: Alt Info Revised is a modification for Heroes of Newerth which provides additional information and improved visuals.Android XML parser for .NET: A library for parsing Android binary XML format. You could use it to parse AndroidManifest.xml inside the APK files.C++ DSV Filter Library: The C++ DSV Filter Library is a simple to use, easy to integrate and extremely efficient and fast CSV/DSV in-memory data store processing library. The DSV filter allows for the efficient evaluation of complex expressions on a per row basis upon the loaded DSV store.CDSHOPMVC: CD Shop Project.Computation Visualizer: ???????????? ????????Create Hyper-V Server USB Memory: A simple application to automate the preparation process for booting Hyper-V Server 2008 R2. USB Flash Memory. csv viewer for large files: designed specifically for geonames.org file. this file lists all cities in the world excepts usa cities. this software allow reading in columns large file in a jtable. the other class generates a png with this coordinates latitude and longitude. a point is plot for each city.FIM CM Tools: FIM CM Tools are tools and samples written in C# for the Microsoft Forefront Identity Manager - Certificate Management Component. Based on FIMCM 2010. Currently it consists of: - Logging notification handlerFONIS telefonski imenik: FONIS telefonski imenik je program koji Vam omogucava da napravite i održavate telefonski imenik na Vašem racunaru. Program je razvijen u C#. Za instaliranje i pokretanje ovog programa, potrebno je instalirati .NET Framework 4.helmi: projet pfe helmi et moezHNQS: HNQSHow to Tie a Tie: A simple How to tie a tie appLiuyi.Phone.PhoneScreenSaver: PhoneScreenSaver Liuyi.Phone.PhoneScreenSaver windows phonemasterapp: Centraliza a informação de vários sites.POC using ASP.NET Web API: A Simple POC which uses : ASP.NET WebAPI AdventureWorksLT2008R2 Table AutoFac ( Dependancy Injection ) Restful Service JQuery Template Functionality : User search for a product Add/remove product to cart user can register himself for a new account Submit an orderRayBullet .Net Enterprise Application Libraries: RayBullet .Net Enterprise Application Libraries is a set of libraries for enterprise application development on Microsoft .Net framework platform. ReflectInsight Logging Extensions: ReflectInsight logging library extensions for 3rd party integration with Log4net, NLog, PostSharp, Enterprise Library and Visual Studio Trace. The ReflectInsight logging extentions make it easier to integrate you existing application logging infrastructure with the ReflectInsight viewer. You'll never need to look at your logging files in a text editor again and you'll have the full power of our viewer for searching, filtering and navigating your log files. The extensions are developed i...Responsive MVVM: MVVM is a great framework for Silverlight and WPF development. But the major flaw with MVVM is with its responsiveness. When the number of user controls increase beyond a certain limit, the UI gets very slow. Responsive MVVM framework aims to make the UI more responsive.road traffic modelling: Program simullates road traffic and managementSharePoint CAML Query Helper for 2007 and 2010: Use this program to help build and test SharePoint CAML Queries (Collaborative Application Markup Language). Compatible with WSS 3.0, MOSS 2007, Foundation 2010, and SharePoint 2010. Uses the SharePoint Object Model to connect to a site (using a URL). Gets all webs in a site, all lists in a web, and all fields/columns in a list. Can export field information to CSV. Also provides interface for building XML CAML Queries, with tools to make it easier managing field names (using drag-drop and cop...Speed up Printer migration using PrintBrm and it's configuration files: This tool is used to create the BrmConfig.XML file that can be used for quickly restoring all the print queues using the Generic / Text Only driver when migrating from a 32bit to a 64bit server.Ultimate Framework (Silverlight Navigation with Prism and Unity): Ultimate framework enables you to easily implement URL driven Silverlight LOB Application, leveraging Prism 4 and Unity for a Modular / Decoupled approach. Supporting nested and parallel frames navigation in Silverlight with any UserControl object within Silverlight.Windows 8 Metro WinRT Channel9 Viewer: Sample Metro App for viewing Channel 9 Videos.

    Read the article

  • Clean Code Developer & Certification in IT - MSCC 21.09.2013

    It was a very busy weekend this time, and quite some hectic to organise the second meetup on a Saturday for the Mauritius Software Craftsmanship Community (MSCC) but it was absolutely fun. Following, I'm writing a brief summary about the topics we spoke about and the new impulses I got. "What a meetup... I was positively impressed. At the beginning I thought that noone would actually show up but then by the time the room got filled. Lots of conversation, great dialogues and fantastic networking between fresh students, experienced students, experienced employees, and self-employed attendees. That's what community is all about!" Above quote was my first reaction shortly after the gathering. And despite being busy during the weekend and yesterday, I took my time to reflect a little bit on things happened and statements made before writing it here on my blog. Additionally, I was also very curious about possible reactions and blogs from other attendees. Reactions from other craftsmen Let me quickly give you some links and quotes from others first... "Like Jochen posted on facebook, that was indeed a 5+ hours marathon (maybe 4 hours for me but still) … Wohoo! We’re indeed a bunch of crazy geeks who did not realise how time flew as we dived into the myriad discussions that sprouted. Yet in the end everyone was happy (:" -- Ish on MSCC meetup - The marathon (: "And the 4hours spent @ Talking drums bore its fruit..I was doing something I never did before....reading the borrowed book while walking....and though I was not that familiar with things mentionned in the book...I was skimming,scanning & flipping...reading titles...short paragraphs...and I skipped pages till I reached home." -- Yannick on Mauritius Software Craftsmanship 1st Meet-up "Hi Developers, Just wanted to share with you the meetups i attended last Saturday - [...] - The second meetup is the one hosted by Jochen Kirstätter, the MSCC, where the attendees were Craftsman, no woman, this time - all sharing the same passion of being a developer - even though it is on different platforms(Windows - Windows Phone - Linux - Adobe(yes a designer) - .Net) - but we manage to sit at the same table - sharing developer views and experience in the corporate world - also talking about good practice when coding( where Jochen initiated a discussion on Clean Coding ) i could not stay till the end - but from what i have heard - the longer you stay the more fun you have till 1600. Developers in the Facebook grouping i invite you to stay tuned about the various developer communities popping up - where you can come to share and learn good practices, develop the entrepreneurial spirit, and learn and share your passion about technologies" -- Arnaud on Facebook More feedback has been posted on the event directly. So, should I really write more? Wouldn't that spoil the impressions? Starting the day with a surprise Indeed, I was very pleased to stumble over the existence of Mobile Monday Mauritius on LinkedIn, an association about any kind of mobile app development, mobile gadgets and latest smartphones on the market. Despite the Monday in their name they had scheduled their recent meeting on Saturday between 10:00 and 12:00hrs. Wow, what a coincidence! Let's grap the bull by its horns and pay them an introductory visit. As they chose the Ebene Accelerator at the Orange Tower in Ebene it was a no-brainer to leave home a bit earlier and stop by. It was quite an experience and fun to talk to the geeks over there. Really looking forward to organise something together.... Arriving at the venue As the children got a bit uneasy at the MoMo gathering and I didn't want to disturb them too much, we arrived early at Bagatelle. Well, no problems as we went for a decent breakfast at Food Lover's Market. Shortly afterwards we went to our venue location, Talking Drums, and prepared the room for the meeting. We only had to take off a repro-painting of the wall in order to have a decent area for the projector. All went very smooth and my two little ones were of great help. Just in time, our first craftsman Avinash arrived on the spot. And then the waiting started... Luckily, not too long. Bit by bit more and more IT people came to join our meeting. Meanwhile, I used the time to give a brief introduction about the MSCC in general, what we are (hm, maybe I am) trying to achieve and that the recent phase is completely focused on creating more awareness that a community like the MSCC is active here in Mauritius. As soon as we reached some 'critical mass' of about ten people I asked everyone for a short introduction and bio, just in case... Conversation between participants started to kick in and we were actually more networking than having a focus on our topics of the day. Quick updates on latest news and development around the MSCC Finally, Clean Code Developer No matter how the position is actually called, whether it is Software Engineer, Software Developer, Programmer, Architect, or Craftsman, anyone working in IT is facing almost the same obstacles. As for the process of writing software applications there are re-occurring patterns and principles combined with some common exercise and best practices on how to resolve them. Initiated by the must-read book 'Clean Code' by Robert C. Martin (aka Uncle Bob) the concept of the Clean Code Developer (CCD) was born already some years ago. CCD is much likely to traditional martial arts where you create awareness of certain principles and learn how to apply practices to improve your style. The CCD initiative recommends to indicate your level of knowledge and experience with coloured wrist bands - equivalent to the belt colours - for various reasons. Frankly speaking, I think that the biggest advantage here is provided by the obvious recognition of conceptual understanding. For example, take the situation of a team meeting... A member with a higher grade in CCD, say Green grade, sees that there are mainly Red grades to talk to, and adjusts her way of communication to their level of understanding. The choice of words might change as certain elements of CCD are not yet familiar to all team members. So instead of talking in an abstract way which only Green grades could follow the whole scenario comes down to Red grade level. Different story, better results... Similar to learning martial arts, we only covered two grades during this occasion - black and red. Most interestingly, there was quite some positive feedback and lots of questions about the principles and practices of the red grade. And we gathered real-world examples from various craftsman and discussed them. Following the Clean Code Developer Red Grade and some annotations from our meetup: CCD Red Grade - Principles Don't Repeat Yourself - DRY Keep It Simple, Stupid (and Short) - KISS Beware of Optimisations! Favour Composition over Inheritance - FCoI Interestingly most of the attendees already heard about those key words but couldn't really classify or categorize them. It's very similar to a situation in which you do not the particular for a thing and have to describe it to others... until someone tells you the actual name and suddenly all is very simple. CCD Red Grade - Practices Follow the Boy Scouts Rule Root Cause Analysis - RCA Use a Version Control System Apply Simple Refactoring Pattern Reflect Daily Introduction to the principles and practices of Clean Code Developer - here: Red Grade As for the various ToDo's we commonly agreed that the Boy Scout Rule clearly is not limited to software development or IT administration but applies to daily life in general. Same for the root cause analysis, btw. We really had good stories with surprisingly endings and conclusions. A quick check about who is using a version control system brought more drive into the conversation. Not only that we had people that aren't using any VCS at all, we also had the 'classic' approach of backup folders and naming conventions as well as the VCS 'junkie' that has to use multiple systems at a time. Just for the records: Git and GitHub seem to be in favour of some of the attendees. Regarding the daily reflection at the end of the day we came up with an easy solution: Wrap it up as a blog entry! Certifications in IT This is kind of a controversy in IT in general. Is it interesting to go for certifications or are they completely obsolete? What are the possibilities to get certified? What are the options we have in Mauritius? How would certificates stand compared to other educational tracks like Computer Science or Web Design. The ratio between craftsmen with certifications like MCP, MSTS, CCNA or LPI versus the ones without wasn't in favour for the first group but there was a high interest in the topic itself and some were really surprised to hear that exam preparations are completely free available online including temporarily voucher codes for either discounts or completely free exams. Furthermore, we discussed possible options on forming so-called study groups on a specific certificates and organising more frequent meetups in order to learn together. Taking into consideration that we have sponsored access to the video course material of Pluralsight (and now PeepCode as well as TrainSignal), we might give it a try by the end of the year. Current favourites are LPIC Level 1 and one of the Microsoft exams 40-78x. Feedback and ideas for the MSCC The closing conversations and discussions about how the MSCC is recently doing, what are the possibilities and what's (hopefully) going to happen in the future were really fertile and I made a couple of mental bullet points which I'm looking forward to tackle down together with orher craftsmen. Eventually, it might be a good option to elaborate on some issues during our weekly Code & Coffee sessions one Wednesday morning. Active discussion on various IT topics like certifications (LPI, MCP, CCNA, etc) and sharing experience Finally, we made it till the end of the planned time. Well, actually the talk was still on and we continued even after 16:00hrs. Unfortunately, we (the children and I) had to leave for evening activities. My resume of the day... It was great to have 15 craftsmen in one room. There are hundreds of IT geeks out there in Mauritius, and as Mauritius Software Craftsmanship Community we still have a lot of work to do to pass on the message to some more key players and companies. Currently, it seems that we are able to attract a good number of students in Computer Science... but we have a lot more to offer, even or especially for IT people on the job. I'm already looking forward to our next Saturday meetup in the near future. PS: Meetup pictures are courtesy of Nirvan Pagooah. Thanks for sharing...

    Read the article

  • CodePlex Daily Summary for Sunday, March 18, 2012

    CodePlex Daily Summary for Sunday, March 18, 2012Popular ReleasesRiP-Ripper & PG-Ripper: RiP-Ripper 2.9.28: changes NEW: Added Support for "PixHub.eu" linksSmartNet: V1.0.0.0: DY SmartNet ?????? V1.0callisto: callisto 2.0.21: Added an option to disable local host detection.Javascript .NET: Javascript .NET v0.6: Upgraded to the latest stable branch of v8 (/tags/3.9.18), and switched to using their scons build system. We no longer include v8 source code as part of this project's source code. Simultaneous multithreaded use of v8 now supported (v8 Isolates), although different contexts may not share objects or call each other. 64-bit .Net 4.0 DLL now included. (Download now includes x86 and x64 for both .Net 3.5 and .Net 4.0.)MyRouter (Virtual WiFi Router): MyRouter 1.0.6: This release should be more stable there were a few bug fixes including the x64 issue as well as an error popping up when MyRouter started this was caused by a NULL valuePulse: Pulse Beta 4: This version is still in development but should include: Logging and error handling have been greatly improved. If you run into an error or Pulse crashes make sure to check the Log folder for a recently modified log file so you can report the details of the issue A bunch of new features for the Wallbase.cc provider. Cleaner separation between inputs, downloading and output. Input and downloading are fairly clean now but outputs are still mixed up in the mix which I'm trying to resolve ...Google Books Downloader for Windows: Google Books Downloader-2.0.0.0.: Google Books DownloaderFinestra Virtual Desktops: 2.5.4501: This is a very minor update release. Please see the information about the 2.5 and 2.5.4500 releases for more information on recent changes. This update did not even have an automatic update triggered for it. Adds error checking and reporting to all threads, not only those with message loopsAcDown????? - Anime&Comic Downloader: AcDown????? v3.9.2: ?? ●AcDown??????????、??、??????,????1M,????,????,?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。??????AcPlay?????,??????、????????????????。 ● AcDown???????????????????????????,???,???????????????????。 ● AcDown???????C#??,????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86),?????"?????????"??? ??????????????,??????????: ??"AcDo...ArcGIS Editor for OpenStreetMap: ArcGIS Editor for OSM 2.0 Release Candidate: Your feedback is welcome - and this is your last chance to get your fixes in for this version! Includes installer for both Feature Server extension and Desktop extension, enhanced functionality for the Desktop tools, and enhanced built-in Javascript Editor for the Feature Server component. This release candidate includes fixes to beta 4 that accommodate domain users for setting up the Server Component, and fixes for reporting/uploading references tracked in the revision table. See Code In-P...C.B.R. : Comic Book Reader: CBR 0.6: 20 Issue trackers are closed and a lot of bugs too Localize view is now MVVM and delete is working. Added the unused flag (take care that it goes to true only when displaying screen elements) Backstage - new input/output format choice control for the conversion Backstage - Add display, behaviour and register file type options in the extended options dialog Explorer list view has been transformed to a custom control. New group header, colunms order and size are saved Single insta...Windows Azure Toolkit for Windows 8: Windows Azure Toolkit for Windows 8 Consumer Prv: Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.1Minor updates to setup experience: Check for WebPI before install Dependency Check updated to support the following VS 11 and VS 2010 SKUs Ultimate, Premium, Professional and Express Certs Windows Azure Toolkit for Windows 8 Consumer Preview - Preview Release v1.2.0 Please download this for Windows Azure Toolkit for Windows 8 functionality on Windows 8 Consumer Preview. The core features of the toolkit include:...Facebook Graph Toolkit: Facebook Graph Toolkit 3.0: ships with JSON Toolkit v3.0, offering parse speed up to 10 times of last version supports Facebook's new auth dialog supports new extend access token endpoint new example Page Tab app filter Graph Api connections using dates fixed bugs in Page Tab appsCODE Framework: 4.0.20312.0: This version includes significant improvements in the WPF system (and the WPF MVVM/MVC system). This includes new styles for Metro controls and layouts. Improved color handling. It also includes an improved theme/style swapping engine down to active (open) views. There also are various other enhancements and small fixes throughout the entire framework.ScintillaNET: ScintillaNET 2.4: 3/12/2012 Jacob Slusser Added support for annotations. Issues Fixed with this Release Issue # Title 25012 25012 25018 25018 25023 25023 25014 25014 Visual Studio ALM Quick Reference Guidance: v3 - For Visual Studio 11: RELEASE README Welcome to the BETA release of the Quick Reference Guide preview As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation ...AvalonDock: AvalonDock 2.0.0345: Welcome to early alpha release of AvalonDock 2.0 I've completely rewritten AvalonDock in order to take full advantage of the MVVM pattern. New version also boost a lot of new features: 1) Deep separation between model and layout. 2) Full WPF binding support thanks to unified logical tree between main docking manager, auto-hide windows and floating windows. 3) Support for Aero semi-maximized windows feature. 4) Support for multiple panes in the same floating windows. For a short list of new f...Windows Azure PowerShell Cmdlets: Windows Azure PowerShell Cmdlets 2.2.2: Changes Added Start Menu Item for Easy Startup Added Link to Getting Started Document Added Ability to Persist Subscription Data to Disk Fixed Get-Deployment to not throw on empty slot Simplified numerous default values for cmdlets Breaking Changes: -SubscriptionName is now mandatory in Set-Subscription. -DefaultStorageAccountName and -DefaultStorageAccountKey parameters were removed from Set-Subscription. Instead, when adding multiple accounts to a subscription, each one needs to be added ...IronPython: 2.7.2.1: On behalf of the IronPython team, I'm happy to announce the final release IronPython 2.7.2. This release includes everything from IronPython 54498 and 62475 as well. Like all IronPython 2.7-series releases, .NET 4 is required to install it. Installing this release will replace any existing IronPython 2.7-series installation. Unlike previous releases, the assemblies for all supported platforms are included in the installer as well as the zip package, in the "Platforms" directory. IronPython 2...Kooboo CMS: Kooboo CMS 3.2.0.0: Breaking changes: When upgrade from previous versions, MUST reset the all the content type templates, otherwise the content manager might get a compile error. New features Integrate with Windows azure. See: http://wiki.kooboo.com/?wiki=Kooboo CMS on Azure Complete solution to deploy on load balance servers. See: http://wiki.kooboo.com/?wiki=Kooboo CMS load balance Update Jquery and Jquery ui to the lastest version(Jquery 1.71, Jquery UI 1.8.16). Tree style text content editing. See:h...New Projects4sr4ss1: Assignment 1 WDT Due date: 26 March 2012ADLN: Project to ADLNbook2guest: book2guestBundlingTweaks: BundlingTweaks makes it easier for developers to develop ASP.NET MVC 4 projects with Bundling/Minification support. You can now take advantage of Bundling, but still see non-minified JavaScript when debugging.COBOL SCREENSAVER: This project will show how to create a Windows screen saver using 1) an object-oriented isCOBOL GUI application, 2) an OpenCobol Windows native executable wrapper for the isCOBOL GUI, and 3) XML, XSLT, HTML5, and a Java FX 2.0 web browser component. Release 0.1 consists of a Java GUI application, the OpenCobol wrapper, and a README file detailing usage, system requirements, and installation of the recommended OpenCobol binaries for Windows.Colorado Time System Get CTS Results to Text File: This application will query a Colorado Time System 5, retrieve the lane results by event and heat. These can then be written to a text file.CommonEventLog: This project provides a simple means of logging messages and exceptions to a custom event log.ContainerTrack: Application for tracking container locationContent Widgets Orchard module: This Orchard module makes it possible to add arbitrary widgets to content types (with the option to disable per item).Cup of Badminton: This is a application for draw cup of badminton. You can insert, edit and delete player. You can choose many variant of draw.FSGREE: FSGREEKeepSafety: ??、??、?????????LibGrafx: LibGrafix is a C++ DLL that contains several classes useful when developing computer graphics applications, particularly OpenGL applications, in the Windows environment. It also includes a class that loads and displays the ModelX format exported by the XNA Model Viewer program. Linq to SQL code generator for Windows Phone: Linq to SQL code generator for Windows Phone is an add-in for Visual Studio 2010 or later to generate the Linq to SQL classes from a DBML diagram. Offline Navigation for Windows Phone 7: This is a simple implementation of offline navigation for windows phone 7 with map offset adjustment support.PayrollSystemRedux: Payroll case study book Robert Martin (Agile PPP in C#)PhoneFlipMenu Control for Windows Phone: A control that mimics the behaviour of the Email app's reply/reply all/forward menu.QTscenarist: QTscenarist makes it easier for Synfig animation to create Synfig movies. You can write scenaries and create your movie with it. It's developed in QT. recycle: This is a recycle web pageSharePoint 2010 Accordian Launch: SharePoint 2010 and SharePoint Foundation Quick Launch Accordian Solution.SharePoint 2010 JavaScript Registration Panel: The SharePoint 2010 JavaScript Registration Panel allows you to add JavaScript files to a site collection without SharePoint 2010 Designer intervention. This is helpful in scenarios where SharePoint Designer 2010 is disabled globally, but you have to add some JavaScript files (e.g. jQuery) to your site collection for every page load. The aim of this project is to provide following features: - load JavaScript files on every page load of your site collection - define the sequence for loadi...Sistema de Gestion Escolar: Projecto final monografico universidad dominicana O&MSmartNet: DYSmartNet????????????????????????。???TCP??,??????????,??????????... solution: solution team explorerTanmiaGrp: This is the tanmia base project library.VideoMobileSteraming: Will Update soonXNASter: XNASter is a short library that allows beginner developers to create simple XNA games. Right now it is in the very early stages of development. Included are the following parts: * 2D generic sprite-based object that supports movement, acceleration, etc. In the future, we are also planning to support: * KinectSkeleton controller Together with the project, there are also a few sample games that show how to use it.???WP: HateCoWP is Hatena Coco Client.???: ????????????????????。

    Read the article

  • Table Variables: an empirical approach.

    - by Phil Factor
    It isn’t entirely a pleasant experience to publish an article only to have it described on Twitter as ‘Horrible’, and to have it criticized on the MVP forum. When this happened to me in the aftermath of publishing my article on Temporary tables recently, I was taken aback, because these critics were experts whose views I respect. What was my crime? It was, I think, to suggest that, despite the obvious quirks, it was best to use Table Variables as a first choice, and to use local Temporary Tables if you hit problems due to these quirks, or if you were doing complex joins using a large number of rows. What are these quirks? Well, table variables have advantages if they are used sensibly, but this requires some awareness by the developer about the potential hazards and how to avoid them. You can be hit by a badly-performing join involving a table variable. Table Variables are a compromise, and this compromise doesn’t always work out well. Explicit indexes aren’t allowed on Table Variables, so one cannot use covering indexes or non-unique indexes. The query optimizer has to make assumptions about the data rather than using column distribution statistics when a table variable is involved in a join, because there aren’t any column-based distribution statistics on a table variable. It assumes a reasonably even distribution of data, and is likely to have little idea of the number of rows in the table variables that are involved in queries. However complex the heuristics that are used might be in determining the best way of executing a SQL query, and they most certainly are, the Query Optimizer is likely to fail occasionally with table variables, under certain circumstances, and produce a Query Execution Plan that is frightful. The experienced developer or DBA will be on the lookout for this sort of problem. In this blog, I’ll be expanding on some of the tests I used when writing my article to illustrate the quirks, and include a subsequent example supplied by Kevin Boles. A simplified example. We’ll start out by illustrating a simple example that shows some of these characteristics. We’ll create two tables filled with random numbers and then see how many matches we get between the two tables. We’ll forget indexes altogether for this example, and use heaps. We’ll try the same Join with two table variables, two table variables with OPTION (RECOMPILE) in the JOIN clause, and with two temporary tables. It is all a bit jerky because of the granularity of the timing that isn’t actually happening at the millisecond level (I used DATETIME). However, you’ll see that the table variable is outperforming the local temporary table up to 10,000 rows. Actually, even without a use of the OPTION (RECOMPILE) hint, it is doing well. What happens when your table size increases? The table variable is, from around 30,000 rows, locked into a very bad execution plan unless you use OPTION (RECOMPILE) to provide the Query Analyser with a decent estimation of the size of the table. However, if it has the OPTION (RECOMPILE), then it is smokin’. Well, up to 120,000 rows, at least. It is performing better than a Temporary table, and in a good linear fashion. What about mixed table joins, where you are joining a temporary table to a table variable? You’d probably expect that the query analyzer would throw up its hands and produce a bad execution plan as if it were a table variable. After all, it knows nothing about the statistics in one of the tables so how could it do any better? Well, it behaves as if it were doing a recompile. And an explicit recompile adds no value at all. (we just go up to 45000 rows since we know the bigger picture now)   Now, if you were new to this, you might be tempted to start drawing conclusions. Beware! We’re dealing with a very complex beast: the Query Optimizer. It can come up with surprises What if we change the query very slightly to insert the results into a Table Variable? We change nothing else and just measure the execution time of the statement as before. Suddenly, the table variable isn’t looking so much better, even taking into account the time involved in doing the table insert. OK, if you haven’t used OPTION (RECOMPILE) then you’re toast. Otherwise, there isn’t much in it between the Table variable and the temporary table. The table variable is faster up to 8000 rows and then not much in it up to 100,000 rows. Past the 8000 row mark, we’ve lost the advantage of the table variable’s speed. Any general rule you may be formulating has just gone for a walk. What we can conclude from this experiment is that if you join two table variables, and can’t use constraints, you’re going to need that Option (RECOMPILE) hint. Count Dracula and the Horror Join. These tables of integers provide a rather unreal example, so let’s try a rather different example, and get stuck into some implicit indexing, by using constraints. What unusual words are contained in the book ‘Dracula’ by Bram Stoker? Here we get a table of all the common words in the English language (60,387 of them) and put them in a table. We put them in a Table Variable with the word as a primary key, a Table Variable Heap and a Table Variable with a primary key. We then take all the distinct words used in the book ‘Dracula’ (7,558 of them). We then create a table variable and insert into it all those uncommon words that are in ‘Dracula’. i.e. all the words in Dracula that aren’t matched in the list of common words. To do this we use a left outer join, where the right-hand value is null. The results show a huge variation, between the sublime and the gorblimey. If both tables contain a Primary Key on the columns we join on, and both are Table Variables, it took 33 Ms. If one table contains a Primary Key, and the other is a heap, and both are Table Variables, it took 46 Ms. If both Table Variables use a unique constraint, then the query takes 36 Ms. If neither table contains a Primary Key and both are Table Variables, it took 116383 Ms. Yes, nearly two minutes!! If both tables contain a Primary Key, one is a Table Variables and the other is a temporary table, it took 113 Ms. If one table contains a Primary Key, and both are Temporary Tables, it took 56 Ms.If both tables are temporary tables and both have primary keys, it took 46 Ms. Here we see table variables which are joined on their primary key again enjoying a  slight performance advantage over temporary tables. Where both tables are table variables and both are heaps, the query suddenly takes nearly two minutes! So what if you have two heaps and you use option Recompile? If you take the rogue query and add the hint, then suddenly, the query drops its time down to 76 Ms. If you add unique indexes, then you've done even better, down to half that time. Here are the text execution plans.So where have we got to? Without drilling down into the minutiae of the execution plans we can begin to create a hypothesis. If you are using table variables, and your tables are relatively small, they are faster than temporary tables, but as the number of rows increases you need to do one of two things: either you need to have a primary key on the column you are using to join on, or else you need to use option (RECOMPILE) If you try to execute a query that is a join, and both tables are table variable heaps, you are asking for trouble, well- slow queries, unless you give the table hint once the number of rows has risen past a point (30,000 in our first example, but this varies considerably according to context). Kevin’s Skew In describing the table-size, I used the term ‘relatively small’. Kevin Boles produced an interesting case where a single-row table variable produces a very poor execution plan when joined to a very, very skewed table. In the original, pasted into my article as a comment, a column consisted of 100000 rows in which the key column was one number (1) . To this was added eight rows with sequential numbers up to 9. When this was joined to a single-tow Table Variable with a key of 2 it produced a bad plan. This problem is unlikely to occur in real usage, and the Query Optimiser team probably never set up a test for it. Actually, the skew can be slightly less extreme than Kevin made it. The following test showed that once the table had 54 sequential rows in the table, then it adopted exactly the same execution plan as for the temporary table and then all was well. Undeniably, real data does occasionally cause problems to the performance of joins in Table Variables due to the extreme skew of the distribution. We've all experienced Perfectly Poisonous Table Variables in real live data. As in Kevin’s example, indexes merely make matters worse, and the OPTION (RECOMPILE) trick does nothing to help. In this case, there is no option but to use a temporary table. However, one has to note that once the slight de-skew had taken place, then the plans were identical across a huge range. Conclusions Where you need to hold intermediate results as part of a process, Table Variables offer a good alternative to temporary tables when used wisely. They can perform faster than a temporary table when the number of rows is not great. For some processing with huge tables, they can perform well when only a clustered index is required, and when the nature of the processing makes an index seek very effective. Table Variables are scoped to the batch or procedure and are unlikely to hang about in the TempDB when they are no longer required. They require no explicit cleanup. Where the number of rows in the table is moderate, you can even use them in joins as ‘Heaps’, unindexed. Beware, however, since, as the number of rows increase, joins on Table Variable heaps can easily become saddled by very poor execution plans, and this must be cured either by adding constraints (UNIQUE or PRIMARY KEY) or by adding the OPTION (RECOMPILE) hint if this is impossible. Occasionally, the way that the data is distributed prevents the efficient use of Table Variables, and this will require using a temporary table instead. Tables Variables require some awareness by the developer about the potential hazards and how to avoid them. If you are not prepared to do any performance monitoring of your code or fine-tuning, and just want to pummel out stuff that ‘just runs’ without considering namby-pamby stuff such as indexes, then stick to Temporary tables. If you are likely to slosh about large numbers of rows in temporary tables without considering the niceties of processing just what is required and no more, then temporary tables provide a safer and less fragile means-to-an-end for you.

    Read the article

  • Windows Azure Mobile Services: New support for iOS apps, Facebook/Twitter/Google identity, Emails, SMS, Blobs, Service Bus and more

    - by ScottGu
    A few weeks ago I blogged about Windows Azure Mobile Services - a new capability in Windows Azure that makes it incredibly easy to connect your client and mobile applications to a scalable cloud backend. Earlier today we delivered a number of great improvements to Windows Azure Mobile Services.  New features include: iOS support – enabling you to connect iPhone and iPad apps to Mobile Services Facebook, Twitter, and Google authentication support with Mobile Services Blob, Table, Queue, and Service Bus support from within your Mobile Service Sending emails from your Mobile Service (in partnership with SendGrid) Sending SMS messages from your Mobile Service (in partnership with Twilio) Ability to deploy mobile services in the West US region All of these improvements are now live in production and available to start using immediately. Below are more details on them: iOS Support This week we delivered initial support for connecting iOS based devices (including iPhones and iPads) to Windows Azure Mobile Services.  Like the rest of our Windows Azure SDK, we are delivering the native iOS libraries to enable this under an open source (Apache 2.0) license on GitHub.  We’re excited to get your feedback on this new library through our forum and GitHub issues list, and we welcome contributions to the SDK. To create a new iOS app or connect an existing iOS app to your Mobile Service, simply select the “iOS” tab within the Quick Start view of a Mobile Service within the Windows Azure Portal – and then follow either the “Create a new iOS app” or “Connect to an existing iOS app” link below it: Clicking either of these links will expand and display step-by-step instructions for how to build an iOS application that connects with your Mobile Service: Read this getting started tutorial to walkthrough how you can build (in less than 5 minutes) a simple iOS “Todo List” app that stores data in Windows Azure.  Then follow the below tutorials to explore how to use the iOS client libraries to store data and authenticate users. Get Started with data in Mobile Services for iOS Get Started with authentication in Mobile Services for iOS Facebook, Twitter, and Google Authentication Support Our initial preview of Mobile Services supported the ability to authenticate users of mobile apps using Microsoft Accounts (formerly called Windows Live ID accounts).  This week we are adding the ability to also authenticate users using Facebook, Twitter, and Google credentials.  These are now supported with both Windows 8 apps as well as iOS apps (and a single app can support multiple forms of identity simultaneously – so you can offer your users a choice of how to login). The below tutorials walkthrough how to register your Mobile Service with an identity provider: How to register your app with Microsoft Account How to register your app with Facebook How to register your app with Twitter How to register your app with Google The tutorials above walkthrough how to obtain a client ID and a secret key from the identity provider. You can then click on the “Identity” tab of your Mobile Service (within the Windows Azure Portal) and save these values to enable server-side authentication with your Mobile Service: You can then write code within your client or mobile app to authenticate your users to the Mobile Service.  For example, below is the code you would write to have them login to the Mobile Service using their Facebook credentials: Windows Store App (using C#): var user = await App.MobileService                     .LoginAsync(MobileServiceAuthenticationProvider.Facebook); iOS app (using Objective C): UINavigationController *controller = [self.todoService.client     loginViewControllerWithProvider:@"facebook"     completion:^(MSUser *user, NSError *error) {        //... }]; Learn more about authenticating Mobile Services using Microsoft Account, Facebook, Twitter, and Google from these tutorials: Get started with authentication in Mobile Services for Windows Store (C#) Get started with authentication in Mobile Services for Windows Store (JavaScript) Get started with authentication in Mobile Services for iOS Using Windows Azure Blob, Tables and ServiceBus with your Mobile Services Mobile Services provide a simple but powerful way to add server logic using server scripts. These scripts are associated with the individual CRUD operations on your mobile service’s tables. Server scripts are great for data validation, custom authorization logic (e.g. does this user participate in this game session), augmenting CRUD operations, sending push notifications, and other similar scenarios.   Server scripts are written in JavaScript and are executed in a secure server-side scripting environment built using Node.js.  You can edit these scripts and save them on the server directly within the Windows Azure Portal: In this week’s release we have added the ability to work with other Windows Azure services from your Mobile Service server scripts.  This is supported using the existing “azure” module within the Windows Azure SDK for Node.js.  For example, the below code could be used in a Mobile Service script to obtain a reference to a Windows Azure Table (after which you could query it or insert data into it):     var azure = require('azure');     var tableService = azure.createTableService("<< account name >>",                                                 "<< access key >>"); Follow the tutorials on the Windows Azure Node.js dev center to learn more about working with Blob, Tables, Queues and Service Bus using the azure module. Sending emails from your Mobile Service In this week’s release we have also added the ability to easily send emails from your Mobile Service, building on our partnership with SendGrid. Whether you want to add a welcome email upon successful user registration, or make your app alert you of certain usage activities, you can do this now by sending email from Mobile Services server scripts. To get started, sign up for SendGrid account at http://sendgrid.com . Windows Azure customers receive a special offer of 25,000 free emails per month from SendGrid. To sign-up for this offer, or get more information, please visit http://www.sendgrid.com/azure.html . One you signed up, you can add the following script to your Mobile Service server scripts to send email via SendGrid service:     var sendgrid = new SendGrid('<< account name >>', '<< password >>');       sendgrid.send({         to: '<< enter email address here >>',         from: '<< enter from address here >>',         subject: 'New to-do item',         text: 'A new to-do was added: ' + item.text     }, function (success, message) {         if (!success) {             console.error(message);         }     }); Follow the Send email from Mobile Services with SendGrid tutorial to learn more. Sending SMS messages from your Mobile Service SMS is a key communication medium for mobile apps - it comes in handy if you want your app to send users a confirmation code during registration, allow your users to invite their friends to install your app or reach out to mobile users without a smartphone. Using Mobile Service server scripts and Twilio’s REST API, you can now easily send SMS messages to your app.  To get started, sign up for Twilio account. Windows Azure customers receive 1000 free text messages when using Twilio and Windows Azure together. Once signed up, you can add the following to your Mobile Service server scripts to send SMS messages:     var httpRequest = require('request');     var account_sid = "<< account SID >>";     var auth_token = "<< auth token >>";       // Create the request body     var body = "From=" + from + "&To=" + to + "&Body=" + message;       // Make the HTTP request to Twilio     httpRequest.post({         url: "https://" + account_sid + ":" + auth_token +              "@api.twilio.com/2010-04-01/Accounts/" + account_sid + "/SMS/Messages.json",         headers: { 'content-type': 'application/x-www-form-urlencoded' },         body: body     }, function (err, resp, body) {         console.log(body);     }); I’m excited to be speaking at the TwilioCon conference this week, and will be showcasing some of the cool scenarios you can now enable with Twilio and Windows Azure Mobile Services. Mobile Services availability in West US region Our initial preview of Windows Azure Mobile Services was only supported in the US East region of Windows Azure.  As with every Windows Azure service, overtime we will extend Mobile Services to all Windows Azure regions. With this week’s preview update we’ve added support so that you can now create your Mobile Service in the West US region as well: Summary The above features are all now live in production and are available to use immediately.  If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using Mobile Services today. Visit the Windows Azure Mobile Developer Center to learn more about how to build apps with Mobile Services. We’ll have even more new features and enhancements coming later this week – including .NET 4.5 support for Windows Azure Web Sites.  Keep an eye out on my blog for details as new features become available. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • CodePlex Daily Summary for Wednesday, July 04, 2012

    CodePlex Daily Summary for Wednesday, July 04, 2012Popular ReleasesMVC Controls Toolkit: Mvc Controls Toolkit 2.2.0: Added Modified all Mv4 related features to conform with the Mvc4 RC Now all items controls accept any IEnumerable<T>(before just List<T> were accepted by most of controls) retrievalManager class that retrieves automatically data from a data source whenever it catchs events triggered by filtering, sorting, and paging controls move method to the updatesManager to move one child objects from a father to another. The move operation can be undone like the insert, update and delete operatio...BlackJumboDog: Ver5.6.6: 2012.07.03 Ver5.6.6 (1) ???????????ftp://?????????、????LIST?????Mini SQL Query: Mini SQL Query (v1.0.68.441): Just a bug fix release for when the connections try to refresh after an edit. Make sure you read the Quickstart for an introduction.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.58: Fix for Issue #18296: provide "ALL" value to the -ignore switch to ignore all error and warning messages. Fix for issue #18293: if encountering EOF before a function declaration or expression is properly closed, throw an appropriate error and don't crash. Adjust the variable-renaming algorithm so it's very specific when renaming variables with the same number of references so a single source file ends up with the same minified names on different platforms. add the ability to specify kno...LogExpert: 1.4 build 4566: This release for the 1.4 version line contains various fixes which have been made some times ago. Until now these fixes were only available in the 1.5 alpha versions. It also contains a fix for: 710. Column finder (press F8 to show) Terminal server issues: Multiple sessions with same user should work now Settings Export/Import available via Settings Dialog still incomple (e.g. tab colors are not saved) maybe I change the file format one day no command line support yet (for importin...DynamicToSql: DynamicToSql 1.0.0 (beta): 1.0.0 beta versionCommonLibrary.NET: CommonLibrary.NET 0.9.8.5 - Final Release: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. FluentscriptCommonLibrary.NET 0.9.8 contains a scripting language called FluentScript. Releases notes for FluentScript located at http://fluentscript.codeplex.com/wikipage?action=Edit&title=Release%20Notes&referringTitle=Documentation Fluentscript - 0.9.8.5 - Final ReleaseApplication: FluentScript Versio...SharePoint 2010 Metro UI: SharePoint 2010 Metro UI8: Please review the documentation link for how to install. Installation takes some basic knowledge of how to upload and edit SharePoint Artifact files. Please view the discussions tab for ongoing FAQsnopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.60: Highlight features & improvements: • Significant performance optimization. • Use AJAX for adding products to the cart. • New flyout mini-shopping cart. • Auto complete suggestions for product searching. • Full-Text support. • EU cookie law support. To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).THE NVL Maker: The NVL Maker Ver 3.51: http://download.codeplex.com/Download?ProjectName=nvlmaker&DownloadId=371510 ????:http://115.com/file/beoef05k#THE-NVL-Maker-ver3.51-sim.7z ????:http://www.mediafire.com/file/6tqdwj9jr6eb9qj/THENVLMakerver3.51tra.7z ======================================== ???? ======================================== 3.51 beta ???: ·?????????????????????? ·?????????,?????????0,?????????????????????? ·??????????????????????????? ·?????????????TJS????(EXP??) ·??4:3???,???????????????,??????????? ·?????????...????: ????2.0.3: 1、???????????。 2、????????。 3、????????????。 4、bug??,????。AssaultCube Reloaded: 2.5 Intrepid: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, download the Linux package. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) You should delete /home/config/saved.cfg to reset binds/other stuff If you us...Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.0: User Right Licensing ContentType version 2.0.267.1Bongiozzo Photosite: Alpha: Just first stable releaseMDS MODELING WORKBOOK: MDS MODELING WORKBOOK: This is the initial release. Works with SQL 2008 R2 Master Data Services. Also works with SQL 2012 Master Data Services but has not been completely tested.Logon Screen Launcher: Logon Screen Launcher 1.3.0: FIXED - Minor handle leak issueBF3Rcon.NET: BF3Rcon.NET 25.0: This update brings the library up to server release R25, which includes the few additions from R21. There are also some minor bug fixes and a couple of other minor changes. In addition, many methods now take advantage of the RconResult class, which will give error information on failed requests; this replaces the bool returned by many methods. There is also an implicit conversion from RconResult to bool (both of which were true on success), so old code shouldn't break. ChangesAdded Player.S...TelerikMvcGridCustomBindingHelper: Version 1.0.15.183-RC: TelerikMvcGridCustomBindingHelper 1.0.15.183 RC This is a RC (release candidate) version, please test and report any error or problem you encounter. Warning: There are many changes in this release and some of them break backward compatibility. Release notes (since 0.5.0-Alpha version): Custom aggregates via an inherited class or inline fluent function Ignore group on aggregates for better performance Projections (restriction of the database columns queried) for an even better performa...PunkBuster™ Screenshot Viewer: PunkBuster™ Screenshot Viewer 1.0: First release of PunkBuster™ Screenshot ViewerDesigning Windows 8 Applications with C# and XAML: Chapters 1 - 7 Release Preview: Source code for all examples from Chapters 1 - 7 for the Release PreviewNew ProjectsAzureMVC4: hiBoonCraft Launcher: BoonCraft Launcher V2.0 See http://352n.dyndns.org for more info on BoonCraftC# to Javascript: Have you ever wanted to automagically have access to the enums you use in your .NET code in the javascript code you're writing for client-side?CMCIC payment gateway provider for NB_Store: CMCIC payment gateway provider for NB_StoreCOFE2 : Cloud Over IFileSystemInfo Entries Extensions: COFE2 enable user to access the user-defined file system on local or foreign computer, using a System.IO-like interface or a RESTful Web API.Directory access via LDAP: .NET library for managing a directory via LDAP.E-mail processing: .NET library for processing e-mail.FAST Search for SharePoint Query Statistics: F4SP Query Statistics scans the FAST for SharePoint Query Logs and presents statistics based on the logs. Total Queries, Top Queries, Queries per user etc...File Backup: This project is an open source windows azure cloud backup win forms application.HanxiaoFu's personal: This will help synchronizing my work done in home and at workLifekostyuk: This is my first project on TFSNet WebSocket Server: NetWebSocket Server is c# based hight performance and scalable Websocket server. Posroid for Windows 8: ?? ??????? ????? ?? ?? ????? ??? ?? ??? ??? ???? ? ? ???, ???8??? ???? ?? ??? ? ? ??? ??? ????? ?????.PowerRules: PowerRules is a group of scripts that help you audit your farm for Configuration Drift (Configuration changes over time)Projet Niloc TETRAS: Student Project to know how to manage and coordinating a team.proyectobanco: PROFE AQUI ESTA EL PROYECTO DISCULPE NOMAS ATT SANCANsheetengine - Isometric HTML5 JavaScript Display Engine: Sheetengine is an HTML5 canvas based isometric display engine for JavaScript. It features textures, z-ordering, shadows, intersecting sheets, object movements.Shiny2: GTS Spoofing program for Generation IV and V of Pokemon.SMS Backup & Restore XML to MySQL: The purpose is to take the XML files created by SMS Backup and Restore (Android) and importing them via a Dropbox/Google Drive synch into a MySQL dbStundenplan TSST: App für Windows Phone um die einzelnen Vertretungspläne der technischen Schule Steinfurt anzusehenswalmacenamiento: Proyecto para el almacenamiento de registrosTFS Work Item Association Check-in Policy: This policy requires TFS source control check-ins to be associated with a single, in-progress task that is assigned to you.TurboTemplate: TurboTemplate is a fast source code generation helper which quick transforms between your SQL database and some templated text of your choice.visblog: this is short summary of my projectVisualHG_fliedonion: This is fork of VisualHG. This will used by improve VisualHG for me. support only Visual Studio 2008 (not SP1). Wave Tag Library: A very simple and modest .wav file tag library. With this library you can load .wav files, edit the tags (equivalent to mp3's ID3 tags) and save back to file.Wordpress: WordPress is web software you can use to create a beautiful website or blog. We like to say that WordPress is both free and priceless at the same time.ZEAL-C02 Bluetooth module Driver for Netduino: A class library for the .NET Micro Framework to support the Zeal-C02 Bluetooth module for Netduino.

    Read the article

  • Using a portable USB monitor in Ubuntu 13.04 (AOC e1649Fwu - DisplayLink)

    Having access to a little bit of IT hardware extravaganza isn't that easy here in Mauritius for exactly two reasons - either it is simply not available or it is expensive like nowhere. Well, by chance I came across an advert by a local hardware supplier and their offer of the week caught my attention - a portable USB monitor. Sounds cool, and the specs are okay as well. It's completely driven via USB 2.0, has a light weight, the dimensions would fit into my laptop bag and the resolution of 1366 x 768 pixels is okay for a second screen. Long story, short ending: I called them and only got to understand that they are out of stock - how convenient! Well, as usual I left some contact details and got the regular 'We call you back' answer. Surprisingly, I didn't receive a phone call as promised and after starting to complain via social media networks they finally came back to me with new units available - and *drum-roll* still the same price tag as promoted (and free delivery on top as one of their employees lives in Flic en Flac). Guess, it was a no-brainer to get at least one unit to fool around with. In worst case it might end up as image frame on the shelf or so... The usual suspects... Ubuntu first! Of course, the packing mentions only Windows or Mac OS as supported operating systems and without hesitation at all, I hooked up the device on my main machine running on Ubuntu 13.04. Result: Blackout... Hm, actually not the situation I was looking for but okay can't be too difficult to get this piece of hardware up and running. Following the output of syslogd (or dmesg if you prefer) the device has been recognised successfully but we got stuck in the initialisation phase. Oct 12 08:17:23 iospc2 kernel: [69818.689137] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 12 08:17:23 iospc2 kernel: [69818.800306] usb 2-4: device descriptor read/64, error -32Oct 12 08:17:24 iospc2 kernel: [69819.043620] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 08:17:24 iospc2 kernel: [69819.043630] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 08:17:24 iospc2 kernel: [69819.043636] usb 2-4: Product: e1649FwuOct 12 08:17:24 iospc2 kernel: [69819.043642] usb 2-4: Manufacturer: DisplayLinkOct 12 08:17:24 iospc2 kernel: [69819.043647] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 08:17:24 iospc2 kernel: [69819.046073] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 08:17:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 08:17:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 12 08:17:30 iospc2 kernel: [69825.411220] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 12 08:17:30 iospc2 kernel: [69825.498778] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 12 08:17:30 iospc2 kernel: [69825.498786] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 12 08:17:30 iospc2 kernel: [69825.498909] usbcore: registered new interface driver udl The device has been recognised as USB device without any question and it is listed properly: # lsusb...Bus 002 Device 005: ID 17e9:4107 DisplayLink ... A quick and dirty research on the net gave me some hints towards the udlfb framebuffer device for USB DisplayLink devices. By default this kernel module is blacklisted $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udl#blacklist udlblacklist udlfb and it is recommended to load it manually. So, unloading the whole udl stack and giving udlfb a shot: Oct 12 08:22:31 iospc2 kernel: [70126.642809] usbcore: registered new interface driver udlfb But still no reaction on the external display which supposedly should have been on and green. Display okay? Test run on Windows Just to be on the safe side and to exclude any hardware related defects or whatsoever - you never know what happened during delivery. I moved the display to a new position on the opposite side of my laptop, installed the display drivers first in Windows Vista (I know, I know...) as recommended in the manual, and then finally hooked it up on that machine. Tada! Display has been recognised correctly and I have a proper choice between cloning and extending my desktop. Testing whether the display is working properly - using Windows Vista Okay, good to know that there is nothing wrong on the hardware side just software... Back to Ubuntu - Kernel too old Some more research on Google and various hits recommend that the original displaylink driver has been merged into the recent kernel development and one should manually upgrade the kernel image (and both header) packages for Ubuntu. At least kernel 3.9 or higher would be necessary, and so I went out to this URL: http://kernel.ubuntu.com/~kernel-ppa/mainline/ and I downloaded all the good stuff from the v3.9-raring directory. The installation itself is easy going via dpkg: $ sudo dpkg -i linux-image-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb$ sudo dpkg -i linux-headers-3.9.0-030900_3.9.0-030900.201304291257_all.deb$ sudo dpkg -i linux-headers-3.9.0-030900-generic_3.9.0-030900.201304291257_amd64.deb As with any kernel upgrades it is necessary to restart the system in order to use the new one. Said and done: $ uname -r3.9.0-030900-generic And now connecting the external display gives me the following output in /var/log/syslog: Oct 12 17:51:36 iospc2 kernel: [ 2314.984293] usb 2-4: new high-speed USB device number 6 using ehci-pciOct 12 17:51:36 iospc2 kernel: [ 2315.096257] usb 2-4: device descriptor read/64, error -32Oct 12 17:51:36 iospc2 kernel: [ 2315.337105] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 12 17:51:36 iospc2 kernel: [ 2315.337115] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 12 17:51:36 iospc2 kernel: [ 2315.337122] usb 2-4: Product: e1649FwuOct 12 17:51:36 iospc2 kernel: [ 2315.337127] usb 2-4: Manufacturer: DisplayLinkOct 12 17:51:36 iospc2 kernel: [ 2315.337132] usb 2-4: SerialNumber: FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338292] udlfb: DisplayLink e1649Fwu - serial #FJBD7HA000778Oct 12 17:51:36 iospc2 kernel: [ 2315.338299] udlfb: vid_17e9&pid_4107&rev_0129 driver's dlfb_data struct at ffff880117e59000Oct 12 17:51:36 iospc2 kernel: [ 2315.338303] udlfb: console enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338306] udlfb: fb_defio enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338309] udlfb: shadow enable=1Oct 12 17:51:36 iospc2 kernel: [ 2315.338468] udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04Oct 12 17:51:36 iospc2 kernel: [ 2315.338473] udlfb: DL chip limited to 1500000 pixel modesOct 12 17:51:36 iospc2 kernel: [ 2315.338565] udlfb: allocated 4 65024 byte urbsOct 12 17:51:36 iospc2 kernel: [ 2315.343592] hid-generic 0003:17E9:4107.0009: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 12 17:51:36 iospc2 mtp-probe: checking bus 2, device 6: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 12 17:51:36 iospc2 mtp-probe: bus: 2, device: 6 was not an MTP deviceOct 12 17:51:36 iospc2 kernel: [ 2315.426583] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.426589] udlfb: Reallocating framebuffer. Addresses will change!Oct 12 17:51:36 iospc2 kernel: [ 2315.428338] udlfb: 1366x768 @ 59 Hz valid modeOct 12 17:51:36 iospc2 kernel: [ 2315.428343] udlfb: set_par mode 1366x768Oct 12 17:51:36 iospc2 kernel: [ 2315.430620] udlfb: DisplayLink USB device /dev/fb1 attached. 1366x768 resolution. Using 4104K framebuffer memory Okay, that's looks more promising but still only blackout on the external screen... And yes, due to my previous modifications I swapped the blacklisted kernel modules: $ less /etc/modprobe.d/blacklist-framebuffer.conf | grep udlblacklist udl#blacklist udlfb Silly me! Okay, back to the original situation in which udl is allowed and udlfb blacklisted. Now, the logging looks similar to this and the screen shows those maroon-brown and azure-blue horizontal bars as described on other online resources. Oct 15 21:27:23 iospc2 kernel: [80934.308238] usb 2-4: new high-speed USB device number 5 using ehci-pciOct 15 21:27:23 iospc2 kernel: [80934.420244] usb 2-4: device descriptor read/64, error -32Oct 15 21:27:24 iospc2 kernel: [80934.660822] usb 2-4: New USB device found, idVendor=17e9, idProduct=4107Oct 15 21:27:24 iospc2 kernel: [80934.660832] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3Oct 15 21:27:24 iospc2 kernel: [80934.660838] usb 2-4: Product: e1649FwuOct 15 21:27:24 iospc2 kernel: [80934.660844] usb 2-4: Manufacturer: DisplayLinkOct 15 21:27:24 iospc2 kernel: [80934.660850] usb 2-4: SerialNumber: FJBD7HA000778Oct 15 21:27:24 iospc2 kernel: [80934.663391] hid-generic 0003:17E9:4107.0008: hiddev0,hidraw5: USB HID v1.10 Device [DisplayLink e1649Fwu] on usb-0000:00:1d.7-4/input1Oct 15 21:27:24 iospc2 mtp-probe: checking bus 2, device 5: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4"Oct 15 21:27:24 iospc2 mtp-probe: bus: 2, device: 5 was not an MTP deviceOct 15 21:27:25 iospc2 kernel: [80935.742407] [drm] vendor descriptor length:17 data:17 5f 01 00 15 05 00 01 03 00 04Oct 15 21:27:25 iospc2 kernel: [80935.834403] udl 2-4:1.0: fb1: udldrmfb frame buffer deviceOct 15 21:27:25 iospc2 kernel: [80935.834416] [drm] Initialized udl 0.0.1 20120220 on minor 1Oct 15 21:27:25 iospc2 kernel: [80935.836389] usbcore: registered new interface driver udlOct 15 21:27:25 iospc2 kernel: [80936.021458] [drm] write mode info 153 Next, it's time to enable the display for our needs... This can be done either via UI or console, just as you'd prefer it. Adding the external USB display under Linux isn't an issue after all... Settings Manager => Display Personally, I like the console. With the help of xrandr we get the screen identifier first $ xrandrScreen 0: minimum 320 x 200, current 3200 x 1080, maximum 32767 x 32767LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm...DVI-0 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm   1366x768       60.0*+ and then give it the usual shot with auto-configuration. Let the system decide what's best for your hardware... $ xrandr --output DVI-0 --off$ xrandr --output DVI-0 --auto And there we go... Cloned output of main display: New kernel, new display... The external USB display works out-of-the-box with a Linux kernel > 3.9.0. Despite of a good number of resources it is absolutely not necessary to create a Device or Screen section in one of Xorg.conf files. This information belongs to the past and is not valid on kernel 3.9 or higher. Same hardware but Windows 8 Of course, I wanted to know how the latest incarnation from Redmond would handle the new hardware... Flawless! Most interesting aspect here: I did not use the driver installation medium on purpose. And I was right... not too long afterwards a dialog with the EULA of DisplayLink appeared on the main screen. And after confirmation of same it took some more seconds and the external USB monitor was ready to rumble. Well, and not only that one... but see for yourself. This time Windows 8 was the easiest solution after all. Resume I can highly recommend this type of hardware to anyone asking me. Although, it's dimensions are 15.6" it is actually lighter than my Samsung Galaxy Tab 10.1 and it still fits into my laptop bag without any issues. From now on... no more single screen while developing software on the road!

    Read the article

  • CodePlex Daily Summary for Tuesday, May 22, 2012

    CodePlex Daily Summary for Tuesday, May 22, 2012Popular ReleasesBlackJumboDog: Ver5.6.3: 2012.05.22 Ver5.6.3  (1) HTTP????????、ftp://??????????????????????Internals Viewer (updated) for SQL Server 2008 R2.: Internals Viewer for SSMS 2008 R2: Updated code to work with SSMS 2008 R2. Changed dependancies, removing old assemblies no longer present and replacing them with updated versions.Orchard Project: Orchard 1.4.2: This is a service release to address 1.4 and 1.4.1 bugs. Please read our release notes for Orchard 1.4.2: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesVirtu: Virtu 0.9.2: Source Requirements.NET Framework 4 Visual Studio 2010 with SP1 or Visual Studio 2010 Express with SP1 Silverlight 5 Tools for Visual Studio 2010 with SP1 Windows Phone 7 Developer Tools (which includes XNA Game Studio 4) Binaries RequirementsSilverlight 5 .NET Framework 4 XNA Framework 4SharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.0): New fetures:View other users predictions Hide/Show background image (web part property) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...State Machine .netmf: State Machine Example: First release.... Contains 3 state machines running on separate threads. Event driven button to change the states. StateMachineEngine to support the Machines Message class with the type of data to send between statesSilverlight socket component: Smark.NetDisk: Smark.NetDisk?????Silverlight ?.net???????????,???????????????????????。Smark.NetDisk??????????,????.net???????????????????????tcp??;???????Silverlight??????????????????????callisto: callisto 2.0.28: Update log: - Extended Scribble protocol. - Updated HTML5 client code - now supports the latest versions of Google Chrome.ExtAspNet: ExtAspNet v3.1.6: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://bbs.extasp.net/ ??:http://demo.extasp.net/ ??:http://doc.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-05-20 v3.1.6 -??RowD...Dynamics XRM Tools: Dynamics XRM Tools BETA 1.0: The Dynamics XRM Tools 1.0 BETA is now available Seperate downloads are available for On Premise and Online as certain features are only available On Premise. This is a BETA build and may not resemble the final release. Many enhancements are in development and will be made available soon. Please provide feedback so that we may learn and discover how to make these tools better.WatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.14.05: Whats New Added New Editor Skin "BootstrapCK-Skin" Added New Editor Skin "Slick" Added Dnn Pages Drop Down to the Link Dialog (to quickly link to a portal tab) changes Fixed Issue #6956 Localization issue with some languages Fixed Issue #6930 Folder Tree view was not working in some cases Changed the user folder from User name to User id User Folder is now used when using Upload Function and User Folder is enabled File-Browser Fixed Resizer Preview Image Optimized the oEmbed Pl...PHPExcel: PHPExcel 1.7.7: See Change Log for details of the new features and bugfixes included in this release. BREAKING CHANGE! From PHPExcel 1.7.8 onwards, the 3rd-party tcPDF library will no longer be bundled with PHPExcel for rendering PDF files through the PDF Writer. The PDF Writer is being rewritten to allow a choice of 3rd party PDF libraries (tcPDF, mPDF, and domPDF initially), none of which will be bundled with PHPExcel, but which can be downloaded seperately from the appropriate sites.GhostBuster: GhostBuster Setup (91520): Added WMI based RestorePoint support Removed test code from program.cs Improved counting. Changed color of ghosted but unfiltered devices. Changed HwEntries into an ObservableCollection. Added Properties Form. Added Properties MenuItem to Context Menu. Added Hide Unfiltered Devices to Context Menu. If you like this tool, leave me a note, rate this project or write a review or Donate to Ghostbuster. Donate to GhostbusterEXCEL??、??、????????:DataPie(??MSSQL 2008、ORACLE、ACCESS 2007): DataPie_V3.2: V3.2, 2012?5?19? ????ORACLE??????。AvalonDock: AvalonDock 2.0.0795: Welcome to the Beta release of AvalonDock 2.0 After 4 months of hard work I'm ready to upload the beta version of AvalonDock 2.0. This new version boosts a lot of new features and now is stable enough to be deployed in production scenarios. For this reason I encourage everyone is using AD 1.3 or earlier to upgrade soon to this new version. The final version is scheduled for the end of June. What is included in Beta: 1) Stability! thanks to all users contribution I’ve corrected a lot of issues...myCollections: Version 2.1.0.0: New in this version : Improved UI New Metro Skin Improved Performance Added Proxy Settings New Music and Books Artist detail Lot of Bug FixingAspxCommerce: AspxCommerce1.1: AspxCommerce - 'Flexible and easy eCommerce platform' offers a complete e-Commerce solution that allows you to build and run your fully functional online store in minutes. You can create your storefront; manage the products through categories and subcategories, accept payments through credit cards and ship the ordered products to the customers. We have everything set up for you, so that you can only focus on building your own online store. Note: To login as a superuser, the username and pass...SiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.1.1616.403): BUG FIX Hide save button when Titles or Descriptions element is selectedMapWindow 6 Desktop GIS: MapWindow 6.1.2: Looking for a .Net GIS Map Application?MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial template. The extensions you create from the template can be loaded in MapWindow.DotSpatial: DotSpatial 1.2: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Tutorials are available. Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components ...New ProjectsBunch of Small Tools: Il s'agit du code source de petits projets principalement en rapport avec le japonais ou le chinois, destinés à des apprenants de ces langues. D'autres petits programmes de ma création peuvent y être ajoutés à ma discrétion. Ces projets ne sont plus en développement, et le code source présenté ici est mis à disposition dans le cadre de mon portefolio.Cat: summaryClínica DECORação: Projeto desenvolvido em ASP.NETDnD Campaing Manager: A little project to create a full campaing manager for D&D 3.5 DMsExcel add-in for Ranges: Slice, dice, and splice Excel ranges to your hearts content. Use RANGE.KEY to do "named argument" style programing.FirstPong: bla bla blaHP TRIM Stream Record Attachment Web App: A simple ASP.Net 4.0 Web application that streams the electronic attachment of a record from Hewlett Packard's TRIM record management software (HP TRIM), to the browser. It uses Routing to retrieve an attachment based on the Record Number, ie: http://localhost/View/D12/45 Where D12/45 is a HP TRIM record number. Code was originally from a HP TRIM sample for ASP.Net 2.0, but I expanded upon it and converted it to .Net 4.0 and added routing for a nicer URL. Json Services: Json Services is a web services framework that intended to make the creation and consumption of SOA based applications easier and more efficient. Json Services framework is built using the .NET framework 4.0 and depends heavily on reflection features of .NET, it is depends on the great Json.NET library for serialization. Json Services framework is intended to be simple and efficient and can be consumed using a wide range of clients, Java Script clients will gain the benefit of automatic...LAVAA: LAVAAlion: abcloja chocolate: Utilização de C# para criar uma loja virtual.Mega Terrain ++: This project presents a method to render large terrains with multiple materials using the Ogre graphics engine.Minería de datos - Reglas de asociación: Laboratorio N° 2 del curso Minería de datos, semestre 1 año 2012. Universidad de Santiago de ChileMNT Cryptography: A very simple cryptography classMsAccess to Sqlite converter: This project aims to create a small application to convert a MSAccess Database file into SQLite format. It needs the SQLite ADO library in order to workMSI Previewer: MSI Previewer is a tool, which extracts the given msi and displays the directory structure in which the files will be placed after the installation. It helps to preview the directory structure of the files present in the msi, which will be placed exactly after installation. muvonni: css3 stylesheet developmentMyModeler: MyModeler is a modeling tool for IT professional and ArchitectsNewSite: First asp.net test project i have on codeplex. I'm not entirely sure where this project is headed at the moment and only have some initial ideas. More details to follow soon.PHLTest: Test team foundationPhoto Studio Nana: ?????????? ???????? ? ???playm_20120517_00365: just a colaboration plan...PROJETO CÓDIGO ABDI: Códigos da ABDIsample project for data entry: hi this is summary for first project....Sharepoint WP List Sinc Mapper: loren ipsum dolorSocialAuth4Net: SocialAuth4Net is open authentication wrapper for populer social platforms for example Facebook, LinkedIn and soon Twitter, Google+tiger: abctweetc: tweetc is a windows command line twitter client written in F#

    Read the article

  • New release of Microsoft All-In-One Code Framework is available for download - March 2011

    - by Jialiang
    A new release of Microsoft All-In-One Code Framework is available on March 8th. Download address: http://1code.codeplex.com/releases/view/62267#DownloadId=215627 You can download individual code samples or browse code samples grouped by technology in the updated code sample index. If it’s the first time that you hear about Microsoft All-In-One Code Framework, please read this Microsoft News Center article http://www.microsoft.com/presspass/features/2011/jan11/01-13codeframework.mspx, or watch the introduction video on YouTube http://www.youtube.com/watch?v=cO5Li3APU58, or read the introduction on our homepage http://1code.codeplex.com/. -------------- New Silverlight code samples CSSLTreeViewCRUDDragDrop Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215808 The code sample was created by Amit Dey. It demonstrates a custom TreeView with added functionalities of CRUD (Create, Read, Update, Delete) and drag-and-drop operations. Silverlight TreeView control with CRUD and drag & drop is a frequently asked programming question in Silverlight  forums. Many customers also requested this code sample in our code sample request service. We hope that this sample can reduce developers' efforts in handling this typical programming scenario. The following blog article introduces the sample in detail: http://blogs.msdn.com/b/codefx/archive/2011/02/15/silverlight-treeview-control-with-crud-and-drag-amp-drop.aspx. CSSL4FileDragDrop and VBSL4FileDragDrop Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215809 http://1code.codeplex.com/releases/view/62253#DownloadId=215810 The code sample demonstrates the new drag&drop feature of Silverlight 4 to implement dragging picures from the local file system to a Silverlight application.   Sometimes we want to change SiteMapPath control's titles and paths according to Query String values. And sometimes we want to create the SiteMapPath dynamically. This code sample shows how to achieve these goals by handling SiteMap.SiteMapResolve event. CSASPNETEncryptAndDecryptConfiguration, VBASPNETEncryptAndDecryptConfiguration Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215027 http://1code.codeplex.com/releases/view/62253#DownloadId=215106 In this sample, we encrypt and decrypt some sensitive information in the config file of a web application by using the RSA asymmetric encryption. This project contains two snippets. The first one demonstrates how to use RSACryptoServiceProvider to generate public key and the corresponding private key and then encrypt/decrypt string value on page. The second part shows how to use RSA configuration provider to encrypt and decrypt configuration section in web.config of web application. connectionStrings section in plain text: Encrypted connectionString:  Note that if you store sensitive data in any of the following configuration sections, we cannot encrypt it by using a protected configuration provider <processModel> <runtime> <mscorlib> <startup> <system.runtime.remoting> <configProtectedData> <satelliteassemblies> <cryptographySettings> <cryptoNameMapping> CSASPNETFileUploadStatus Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215028 I believe ASP.NET programmers will like this sample, because in many cases we need customers know the current status of the uploading files, including the upload speed and completion percentage and so on. Under normal circumstances, we need to use COM components to accomplish this function, such as Flash, Silverlight, etc. The uploading data can be retrieved in two places, the client-side and the server-side. For the client, for the safety factors, the file upload status information cannot be got from JavaScript or server-side code, so we need COM component, like Flash and Silverlight to accomplish this, I do not like this approach because the customer need to install these components, but also we need to learn another programming framework. For the server side, we can get the information through coding, but the key question is how to tell the client results. In this case, We will combine custom HTTPModule and AJAX technology to illustrate how to analyze the HTTP protocol, how to break the file request packets, how to customize the location of the server-side file caching, how to return the file uploading status back to the client and so on . CSASPNETHighlightCodeInPage, VBASPNETHighlightCodeInPage Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215029 http://1code.codeplex.com/releases/view/62253#DownloadId=215108 This sample imitates a system that needs display the highlighted code in an ASP.NET page . As a matter of fact, sometimes we input code like C# or HTML in a web page and we need these codes to be highlighted for a better reading experience. It is convenient for us to keep the code in mind if it is highlighted. So in this case, the sample shows how to highlight the code in an ASP.NET page. It is not difficult to highlight the code in a web page by using String.Replace method directly. This  method can return a new string in which all occurrences of a specified string in the current instance are replaced with another specified string. However, it may not be a good idea, because it's not extremely fast, in fact, it's pretty slow. In addition, it is hard to highlight multiple keywords by using String.Replace method directly. Sometimes we need to copy source code from visual studio to a web page, for readability purpose, highlight the code is important while set the different types of keywords to different colors in a web page by using String.Replace method directly is not available. To handle this issue, we need to use a hashtable variable to store the different languages of code and their related regular expressions with matching options. Furthermore, define the css styles which used to highlight the code in a web page. The sample project can auto add the style object to the matching string of code. A step-by-step guide illustrating how to highlight the code in an ASP.NET page: 1. the HighlightCodePage.aspx page Choose a type of language in the dropdownlist control and paste the code in the textbox control, then click the HighLight button. 2.  Display the highlighted code in an ASP.NET page After user clicks the HighLight button, the highlighted code will be displayed at right side of the page.        CSASPNETPreventMultipleWindows Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215032 This sample demonstrates a step-by-step guide illustrating how to detect and prevent multiple windows or tab usage in Web Applications. The sample imitates a system that need to prevent multiple windows or tabs to solve some problems like sharing sessions, protect duplicated login, data concurrency, etc. In fact, there are many methods achieving this goal. Here we give a solution of use JavaScript, Sample shows how to use window.name property check the correct links and throw other requests to invalid pages. This code-sample use two user controls to make a distinction between base page and target page, user only need drag different controls to appropriate web form pages. so user need not write repetitive code in every page, it will make coding work lightly and convenient for modify your code.  JSVirtualKeyboard Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215093 This article describes an All-In-One framework sample that demonstrates a step-by-step guide illustrating how to build a virtual keyboard in your HTML page. Sometimes we may need to offer a virtual keyboard to let users input something without their real keyboards. This scenario often occurs when users will enter their password to get access to our sites and we want to protect the password from some kinds of back-door software, a Key-logger for example, and we will find a virtual keyboard on the page will be a good choice here. To create a virtual keyboard, we firstly need to add some buttons to the page. And when users click on a certain button, the JavaScript function handling the onclick event will input an appropriated character to the textbox. That is the simple logic of this feature. However, if we indeed want a virtual keyboard to substitute for the real keyboard completely, we will need more advanced logic to handle keys like Caps-Lock and Shift etc. That will be a complex work to achieve. CSASPNETDataListImageGallery Download: http://1code.codeplex.com/releases/view/62261#DownloadId=215267 This code sample demonstrates how to create an Image Gallery application by using the DataList control in ASP.NET. You may find the Image Gallery is widely used in many social networking sites, personal websites and E-Business websites. For example, you may use the Image Gallery to show a library of personal uploaded images on a personal website. Slideshow is also a popular tool to display images on websites. This code sample demonstrates how to use the DataList and ImageButton controls in ASP.NET to create an Image Gallery with image navigation. You can click on a thumbnail image in the Datalist control to display a larger version of the image on the page. This sample code reads the image paths from a certain directory into a FileInfo array. Then, the FileInfo array is used to populate a custom DataTable object which is bound to the Datalist control. This code sample also implements a custom paging system that allows five images to be displayed horizontally on one page. The following link buttons are used to implement a custom paging system:   •     First •     Previous •     Next •     Last Note We recommend that you use this method to load no more than five images at a time. You can also set the SelectedIndex property for the DataList control to limit the number of the thumbnail images that can be selected. To indicate which image is selected, you can set the SelectedStyle property for the DataList control. VBASPNETSearchEngine Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215112 This sample shows how to implement a simple search engine in an ASP.NET web site. It uses LIKE condition in SQL statement to search database. Then it highlights keywords in search result by using Regular Expression and JavaScript. New Windows General code samples CSCheckEXEType, VBCheckEXEType Downloads: http://1code.codeplex.com/releases/view/62253#DownloadId=215045 http://1code.codeplex.com/releases/view/62253#DownloadId=215120 The sample demonstrates how to check an executable file type.  For a given executable file, we can get 1 whether it is a console application 2 whether it is a .Net application 3 whether it is a 32bit native application. 4 The full display name of a .NET application, e.g. System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL New Internet Explorer code samples CSIEExplorerBar, VBIEExplorerBar Downloads: http://1code.codeplex.com/releases/view/62253#DownloadId=215060 http://1code.codeplex.com/releases/view/62253#DownloadId=215133 The sample demonstrates how to create and deploy an IE Explorer Bar which could list all the images in a web page. CSBrowserHelperObject, VBBrowserHelperObject Downloads: http://1code.codeplex.com/releases/view/62253#DownloadId=215044 http://1code.codeplex.com/releases/view/62253#DownloadId=215119 The sample demonstrates how to create and deploy a Browser Helper Object,  and the BHO in this sample is used to disable the context menu in IE. New Windows Workflow Foundation code samples CSWF4ActivitiesCorrelation Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215085 Consider that there are two such workflow instances:       start                                   start          |                                           | Receive activity      Receive activity         |                                           | Receive2 activity      Receive2 activity         |                                           | A WCF request comes to call the second Receive2 activity. Which one should take care of the request? The answer is Correlation. This sample will show you how to correlate two workflow service to work together. -------------- New ASP.NET code samples CSASPNETBreadcrumbWithQueryString Download: http://1code.codeplex.com/releases/view/62253#DownloadId=215022

    Read the article

  • FMw Diagnostic Framework : Automatic Capture of Diagnostic Data Upon First Failure!

    - by Daniel Mortimer
    Introduction There is nothing more frustrating than a problem that "cannot be reproduced". Logs, configuration files have been analysed but there just isn't enough information to establish the root cause. The issue maybe closed, but you are left with the feeling that the problem will raise its ugly head again in the future. Trouble is, to resolve such issues you need to capture diagnostic data at the exact time the incident occurs. Step forward Fusion Middleware Diagnostic Framework!  Diagnostic Framework monitors WebLogic Managed Servers and delivers "Automatic capture of diagnostic data upon first failure". To quote fromOracle Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)Chapter 13 Diagnosing Problems "When a critical error occurs ... the Diagnostic Framework automatically collects diagnostics, such as thread dumps, DMS metric dumps, and WebLogic Diagnostics Framework (WLDF) server image dumps ... The data is stored in a file-based repository and is accessible with command-line utilities." In other words the data collected upon first failure - especially the thread and image dumps - provides a snapshot of the system as or immediately after the problem occurs. The table below shows the type of WebLogic Server issues which fall into the scope of Diagnostic Framework How to Configure Diagnostic Framework? Depending on your Fusion Middleware product choice you may not need to do anything! Diagnostic Framework is automatically installed, configured and initiated for any WebLogic Domain which has the Oracle Java Required Files (JRF) template applied. This template is applied by default whenever you configure WebLogic Managed Servers for products such as Portal / Forms / Reports / Discoverer Identity Management ( OID , OAM , OIM etc) WebCenter SOA Check your WebLogic Domain directory structure. If you have an "adr" sub directory under DOMAIN_HOME/servers/<servername>/ then JRF template has been applied and Diagnostic Framework will be in play. Should the "adr" sub directory not exist, review the advice given in My Oracle Support article How to Apply FMW ( EM ) Control and JRF to a WebLogic Domain and Managed Servers [ID 947043.1] If you are working with a standalone WebLogic Server solution and applying Oracle JRF is not acceptable, consider using WLDF - WebLogic Diagnostic Framework. (Fusion Middleware Diagnostic Framework makes use of WLDF under the covers.) Couple of useful links about WLDF are listed below Configuring and Using the Diagnostics Framework for Oracle WebLogic Server 11g WebLogic Diagnostics Framework-A Very Useful Tool [A nice blog which describes a WLDF use case] How to Get Started With Diagnostic Framework To be frank, the Fusion Middleware Administrator's Guide is the best place to start your learning Oracle Fusion Middleware Administrator's Guide 11g Release 1 (11.1.1)Chapter 13 Diagnosing Problems A lot of reading here,  but if you are in hurry and just want to get the right information to Oracle Support to help resolve your issue, check out the next section below. How to Upload Diagnostic Framework Incident Data to Oracle Support Some Background Information There are three interfaces to the Repository: Enterprise Manager Cloud Control (Support Workbench) WLST (Command Line) ADRCI (Command Line) The Enterprise Manager Cloud Control does provide a nice GUI interface to search, view and package diagnostic framework incidents. However, this software is not to be confused with Fusion Middleware (EM) Control. Cloud Control (formerly known as Grid Control) is part of the Enterprise Manager media package. EM Cloud Control has it's own install and configuration story. Therefore, for the benefit of those yet to install and play with Cloud Control, I am going to describe how to use the command line tools. Ideally, you would only need to one command line interface, but currently I suggest using both - mainly due to the fact that ADRCI SHOW INCIDENTS does not reveal the description behind the Diagnostic Framework error code. Instructions: Note: WLST and ADRCI are case sensitive when it comes to handling parameter values. If you make a mistake, expect an unfriendly syntax error message. 1) Find the incident Note: The managed server which you are troubleshooting must be up and running. If the managed server is down, ensure the domain's Admin Server is accessible. If you cannot connect to the Admin Server or the Managed Server the example WLST commands will not work. a) Launch WLST  Note: Use the WLST which resides in the "oracle_common" directory (not WL_HOME/common/bin) otherwise you will get a syntax error like the one below Traceback (innermost last):  File "<console>", line 1, in ?NameError: listIncidents MW_HOME/oracle_common/common/bin/wlst.sh b) Connect to the managed server or the admin server e.g. wls:/offline> connect('weblogic','welcome1','t3://localhost:7020') c) Run the command wls:/MyDomain/serverConfig> listIncidents() This will list the incidents for the server to which you have connected. If you have connected to the Admin Server and want to list the incidents for a managed server within the domain, use the command wls:/MyDomain/serverConfig> listIncidents(adrHome='diag\ofm\MyDomain\MyManagedServer' ,server='MyManagedServer') Example output Incident Id     Problem Key              Incident Time         1       DFW-99998 [java.lang.NullPointerException] [oracle.error.simulator.ErrorSimulator.createNullPointerException][errorWebApp_1-0-0-0]        Fri Nov 02 10:38:46 GMT 2012  The piece highlighted in bold is the description you do not see when using the ADRCI 'SHOW INCIDENT' command. Make a note of the incident id. You are ready to move to step 2 2. Package the incident a) Set up the environment - example commands below are for Unix cd <DOMAIN_HOME>/bin . ./setDomainEnv.sh If you want ADRCI to run a Remote Diagnostic Agent collection (recommended) at generate package time, point ORACLE_HOME at oracle_common ORACLE_HOME=$MW_HOME/oracle_common; export ORACLE_HOME To prevent ADRCI from running RDA at generate package time, point ORACLE_HOME at WL_HOME/server/adr directory.  ORACLE_HOME=$WL_HOME/server/adr; export ORACLE_HOME b) Launch adrci $WL_HOME/server/adr/adrci c) Set BASE and HOMEPATH adrci> SET BASE /oracle/middleware/user_projects/domains/ mydomain/servers/mymanagedserver/adr adrci> SET HOMEPATH diag/ofm/mydomain/mymanagedserver d)  Optionally run SHOW INCIDENTS e.g. adrci> SHOW INCIDENTS -MODE DETAIL ADR Home = /oracle/middleware/user_projects/domains/mydomain/ servers/mymanagedserver/adr/diag/ofm/mydomain/mymanagedserver:***********************************************************************************************************************************INCIDENT INFO RECORD 1**********************************************************   INCIDENT_ID                   1   STATUS                        ready   CREATE_TIME                   2012-11-02 10:38:46.468000 +00:00   PROBLEM_ID                    1   CLOSE_TIME                    <NULL>   FLOOD_CONTROLLED              none   ERROR_FACILITY                DFW   ERROR_NUMBER                  99998   ERROR_ARG1                    <NULL>   ERROR_ARG2                    <NULL>   ERROR_ARG3                    <NULL>   ERROR_ARG4                    <NULL>   ERROR_ARG5                    <NULL>   ERROR_ARG6                    <NULL>   ERROR_ARG7                    <NULL>   ERROR_ARG8                    <NULL>   ERROR_ARG9                    <NULL>   ERROR_ARG10                   <NULL>   ERROR_ARG11                   <NULL>   ERROR_ARG12                   <NULL>   SIGNALLING_COMPONENT          <NULL>   SIGNALLING_SUBCOMPONENT       <NULL>   SUSPECT_COMPONENT             <NULL>   SUSPECT_SUBCOMPONENT          <NULL>   ECID                          5162744c6a2eea5e:155ff445:13ac0aae7cb:-8000-0000000000000325   IMPACTS                       01 rows fetched e)  Create a logical package IPS CREATE PACKAGE INCIDENT incident_number e.g. adrci> IPS CREATE PACKAGE INCIDENT 1Created package 1 based on incident id 1, correlation level typical f) Generate the package IPS GENERATE PACKAGE package_number IN path e.g. adrci> IPS GENERATE PACKAGE 1 IN /tmp Generated package 1 in file /tmp/DFW99998j_20121102113633_COM_1.zip, mode complete Note: If the generate package command hangs, ADRCI may be experiencing an issue when running RDA. To avoid such trouble, exit ADRCI and point the ORACLE_HOME environment variable at WL_HOME/server/adr 3) Upload the package zip to Oracle Support via your Service Request a) Log into My Oracle Support and locate your Service Request b) Click on "Add Attachments c) And upload the zip file

    Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149  | Next Page >