Search Results

Search found 22689 results on 908 pages for 'bad request'.

Page 142/908 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Squid 2.7.STABLE3-4.1 as a transparent proxy on Ubuntu Server 9.04

  - by E3 Group

  Can't get this to work at all! I'm trying to get this linux box to act as a transparent proxy and, with the help of DHCP, force everyone on the network to gate into the proxy. I have two ethernet connections, both to the same switch. And I'm trying to get 192.168.1.234 to become the default gateway. The actual WAN connection is to a gateway 192.168.1.1. eth0 is 192.168.1.234 eth1 is 192.168.1.2 Effectively I'm trying to make eth0 a LAN only interface and eth1 a WAN interface. I've oi should set the gateway for eth1 to point to 192.168.1.234 my squid.conf file has the following directives added at the bottom: nly set eth0 to have a gateway address in /etc/network/interfaces I'm not sure whether http_port 3128 transparent acl lan src 192.168.1.0/24 acl lh src 127.0.0.1/255.255.255.0 http_access allow lan http_access allow lh i've added the following routing commands: iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.1.2:3128 iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 I set a computer with TCP settings 192.168.1.234 as the gateway and opened up google.com, but it comes up with a request error. Any ideas why this isn't working? :( Been searching continuously for a solution to no avail. ----------------------------- EDIT ------------------------------- Managed to get it to route properly to the squid, here's the error I get in the browser: ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: www.google.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-gb,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cache-Control: max-age=0 The following error was encountered: * Invalid Request Some aspect of the HTTP Request is invalid. Possible problems: * Missing or unknown request method * Missing URL * Missing HTTP Identifier (HTTP/1.0) * Request is too large * Content-Length missing for POST or PUT requests * Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster. Generated Mon, 26 Oct 2009 03:41:15 GMT by mjolnir.lloydharrington.local (squid/2.7.STABLE3)

  Read the article

• iPod touch has extremely slow wifi, drops packets - only on my router

  - by mskfisher

  I just purchased an iPod Touch. I am having a lot of trouble with its speeds on my Tenda W311R, but it has no speed problems on my neighbor's Netgear router. It will connect and authenticate to my network, but the Speed Test app from speedtest.net shows rates near 20-50 kbps. If I run the speed test immediately after powering the iPod on, it will get speeds of 10-20 Mbps, like it should - but the speeds slow down to the kbps range abut 10-15 seconds afterward. I get the same behavior with encryption and without encryption, and regardless of N, G, or B compatibility settings in the router. I've tried rebooting the iPod and resetting the network settings, but it's still slow. I've tried pinging the iPod from another computer, and it shows about 40% packet loss: $ ping 192.168.0.111 PING 192.168.0.111 (192.168.0.111): 56 data bytes 64 bytes from 192.168.0.111: icmp_seq=0 ttl=64 time=14.188 ms 64 bytes from 192.168.0.111: icmp_seq=1 ttl=64 time=11.556 ms 64 bytes from 192.168.0.111: icmp_seq=2 ttl=64 time=5.675 ms 64 bytes from 192.168.0.111: icmp_seq=3 ttl=64 time=5.721 ms Request timeout for icmp_seq 4 64 bytes from 192.168.0.111: icmp_seq=5 ttl=64 time=6.491 ms Request timeout for icmp_seq 6 64 bytes from 192.168.0.111: icmp_seq=7 ttl=64 time=8.065 ms Request timeout for icmp_seq 8 Request timeout for icmp_seq 9 Request timeout for icmp_seq 10 64 bytes from 192.168.0.111: icmp_seq=11 ttl=64 time=9.605 ms Signal strength is good - I'm never more than 20 feet from my access point, and it exhibits the same behavior if I'm standing next to the router. It works just well enough to receive text, but videos don't work at all. App downloads are hit and miss. I've tweaked just about all of the settings I can see to tweak, and I'm at a loss. I have also been searching Google for the past three days, all to no avail. Any suggestions?

  Read the article

• Twitter API Voting System

  - by Richard Jones

  So I blatantly got this idea from the MIX 10 event. At MIX they held a rockband talent competition type thing (I’m not quite sure of all the details).    But the interesting part for me is how they collected votes. They used Twitter (what else, when you have a few thousand geeks available to you). The basic idea was that you tweeted your vote with a # tag, i.e #ROCKBANDVOTE vote Richard How cool….    So the question is how do you write something to collate and count all the votes?   Time to press the magic Visual Studio new Project button… Twitter has a really nice API that can be invoked from .NET.   This is the snippet of code that will search for any given phrase i.e #ROCKBANDVOTE   public static XmlDocument GetSearchResults(string searchfor) { return GetSearchResults(searchfor, ""); }   public static XmlDocument GetSearchResults(string searchfor, string sinceid) { XmlDocument retdoc = new XmlDocument();   try { string url = "http://search.twitter.com/search.atom?&q=" + searchfor; if (sinceid.Length > 0) url += "since_id=" + sinceid; HttpWebRequest request = (HttpWebRequest)WebRequest.Create(url); request.Method = "POST"; request.ContentType = "application/x-www-form-urlencoded"; WebResponse res = request.GetResponse(); retdoc.Load(res.GetResponseStream()); res.Close();   } catch { } return retdoc; } } I’ve got two overloads, that optionally let you pass in the last ID to look for as well as what you want to search for. Note that Twitter rate limits the amount of requests you can send,  see http://apiwiki.twitter.com/Rate-limiting So realistically I wanted my app to run every hour or so and only pull out results that haven’t been received before (hence the overload to pass in the sinceid parameter). I’ll post the code when finished that parses the returned XML.

  Read the article

• mod_wsgi, .htaccess and rewriterule

  - by hadaraz

  I'm using several django projects running on the same apache instance through mod_wsgi, configured with virtualhost for each site, see the httpd.conf here. For one of the sites I want to use static-cache (staticgenerator), so I set up a directory with .htaccess file which contains: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}/index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] where 3456 is the django port on the server. Using this rewrite rule, the request is always forwarded to the mod_wsgi handler, even if the file or directory exists, and if the file index.html exists the request shows as request-path/index.html. I tried another setup: RequestHeader unset X-Forwarded-Host RewriteEngine on RewriteBase / RewriteCond $1 !-d RewriteCond $1index.html !-f RewriteRule ^(.*) http://127.0.0.1:3456/$1 [P] but got almost the same results. All requests are transferred to the mod_wsgi handler, but the request path is now the original one. To sum it up: What is the correct RewriteCond to use here? How do you transfer a request to the mod_wsgi handler? Is it the right way? If that's not the way to do it, then how do you serve static files from a directory when they exist, and when they don't you serve from apache/mode_wsgi? Thanks for your help.

  Read the article

• Configure VirtualHost to Rewrite HTTP://subdomain... to HTTPS://internaldirectory

  - by David Kaczynski

  How do I configure Apache to rewrite an http request for a subdomain to an https request for the correct directory? For example, I have the following VirtualHost configuration: However, this turns http://redmine...us into https://redmine...us/redmine. Also, changing RewriteRule ^(.*)$ https://%{HTTP_HOST}/redmine [R] to RewriteRule ^(.*)$ https://%{HTTP_HOST} [R] seems to simply redirect the HTTP request to HTTP://...us, which is currently the default /var/www/index.html page. Any suggestions?

  Read the article

• Client A can ping server S, but client B cannot

  - by Soundar Rajan

  I moved the question to here from stackoverflow.com http://stackoverflow.com/questions/2917569/unable-to-ping-server-from-client-b-but-able-to-ping-from-client-a-please-help I am trying to configure a IIS 6.0/Windows Server 2003 web server with a ASP.net application. When I try to ping the server from client computer A I get the following: PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping succeeds! From client computer B, BOTH the pings fail. PING 74.208.192.xxx ==> Ping fails PING 74.208.192.xxx:80 ==> Ping fails with a message "Ping request could not find host 74.208.192.xxx:80" Both clients A and B are on the same subnet. The server is outside (a virtual server hosted by an ISP) I have an ASP.NET application in a virtual directory on the server. In IE or firefox, if I enter http://74.208.192.xxx/subdir/subdir/../Default.aspx, it works from both the clients! The server has default firewall settings but web server enabled (Port 80 is open). From client A (note the different 'reply to' address when the ping succeeds. C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx Pinging 74.208.192.xx with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.xx: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Program Files\Microsoft Visual Studio 9.0\VC>ping 74.208.192.xx:80 Pinging 74.208.192.xx:80 [208.67.216.xxx] with 32 bytes of data: Reply from 208.67.216.xxx: bytes=32 time=35ms TTL=54 ... Reply from 208.67.216.xxx: bytes=32 time=33ms TTL=54 Ping statistics for 208.67.216.xxx: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 32ms, Maximum = 54ms, Average = 38ms From client B C:\Documents and Settings\user>ping 74.208.192.81 Pinging 74.208.192.81 with 32 bytes of data: Request timed out. ... Request timed out. Ping statistics for 74.208.192.81: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\Documents and Settings\user>ping 74.208.192.81:80 Ping request could not find host 74.208.192.81:80. Please check the name and try again. My main problem is I have a web service (asmx) file and the web service client program is not able to access it from client B, but able to access it from client A. I am trying to find out why and thought this ping issue may shed some light. I can ping yahoo.com both the computers.

  Read the article

• BES Express - configure MDS to push messages from 3rd party web application

  - by Max Gontar

  Hi! I have developed IIS web service to send PAP messages using Blackberry Push API over MDS. And there is an application installed on device, configured to receive push messages on appropriate port. Everything works well on MDS simulator. But it's not working well in real environment: I have installed BES Express and register several devices. I can browse MDS url with appropriate port, so url is correct. Also port enabled for reliable pushes is used in push message and in device application. Here is MDS simulator log: <2011-01-12 14:00:03.456 EET>:[272]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = PapServlet: request from 0:0:0:0:0:0:0:1 564 bytes...> <2011-01-12 14:00:03.476 EET>:[273]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Mapping PAP request to push request for pushID:pushID:asdas> <2011-01-12 14:00:03.479 EET>:[274]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = PushServlet: POST request from [UNKNOWN @ 0:0:0:0:0:0:0:1] to [PAPDEST=WAPPUSH%3D2100000A%253A100%2FTYPE%3DUSER%40rim.net&PORT=100&REQUESTURI=/] : -1 bytes...> <2011-01-12 14:00:03.480 EET>:[275]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = submitting push message with id:pushID:asdas> <2011-01-12 14:00:03.482 EET>:[276]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Executing push submit command for pushID:pushID:asdas> <2011-01-12 14:00:03.483 EET>:[278]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Pushing message to: 2100000a> <2011-01-12 14:00:03.484 EET>:[279]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Number of active push connections:1> <2011-01-12 14:00:03.489 EET>:[280]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = added server-initiated connection = -872546301, push id = pushID:asdas> <2011-01-12 14:00:03.491 EET>:[281]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Available threads in DefaultJobPool = 9 running JobRunner: DefaultJobRunner-7> <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION => <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Transmission Line Section]:> <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = POST / HTTP/1.1> <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Headers Section]: 8 headers> <2011-01-12 14:00:03.494 EET>:[282]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = ReceivedFromServer, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Parameters Section]: 3 parameters> <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION => <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Transmission Line Section]:> <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = POST / HTTP/1.1> <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Headers Section]: 9 headers> <2011-01-12 14:00:03.499 EET>:[283]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, HANDLER = HTTP, EVENT = SentToDevice, DEVICEPIN = 2100000a, CONNECTIONID = -872546301, HTTPTRANSMISSION = [Parameters Section]: 3 parameters> <2011-01-12 14:00:03.501 EET>:[284]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Finished JobRunner: DefaultJobRunner-7, available threads in DefaultJobPool = 10, time spent = 8ms> <2011-01-12 14:00:03.521 EET>:[287]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, EVENT = CreatedSendingQueue, DEVICEPIN = 2100000a> <2011-01-12 14:00:03.526 EET>:[290]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, EVENT = Sending, TAG = 1288699908, DEVICEPIN = 2100000a, VERSION = 16, CONNECTIONID = -872546301, SEQUENCE = 0, TYPE = NOTIFY-REQUEST, CONNECTIONHANDLER = http, PROTOCOL = TCP, PARAMETERS = [MGONTAR/10.10.0.35:100], SIZE = 339> <2011-01-12 14:00:03.531 EET>:[291]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Number of active push connections:0> <2011-01-12 14:00:03.591 EET>:[292]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, EVENT = Notification, TAG = 1288699908, STATE = DELIVERED> <2011-01-12 14:00:03.600 EET>:[296]:<MDS-CS_MDS>:<DEBUG>:<LAYER = SCM, EVENT = Device connections: AVG latency (msecs)79> <2011-01-12 14:00:03.600 EET>:[297]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, Removed push connection:-872546301> <2011-01-12 14:00:07.015 EET>:[298]:<MDS-CS_MDS>:<DEBUG>:<LAYER = IPPP, EVENT = RemovedSendingQueue, DEVICEPIN = 2100000a> And here is real MDS log: <2011-01-12 11:35:02.763 GMT>:[3932]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, PapServlet: request from 192.168.1.241 583 bytes...> <2011-01-12 11:35:02.897 GMT>:[3933]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Mapping PAP request to push request for pushID:pushID:sdfsdfwerwer> <2011-01-12 11:35:02.909 GMT>:[3934]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, PushServlet: POST request from [UNKNOWN @ 192.168.1.241] to [PAPDEST=WAPPUSH%3D22D7F6BD%253A7874%2FTYPE%3DUSER%40rim.net&PORT=7874&REQUESTURI=/]> <2011-01-12 11:35:02.909 GMT>:[3934]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<push id: pushID:sdfsdfwerwer> <2011-01-12 11:35:02.910 GMT>:[3935]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, submitting push message with id:pushID:sdfsdfwerwer> <2011-01-12 11:35:02.910 GMT>:[3936]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Executing push submit command for pushID:pushID:sdfsdfwerwer> <2011-01-12 11:35:02.911 GMT>:[3937]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Pushing message to: 22d7f6bd> <2011-01-12 11:35:02.912 GMT>:[3938]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Number of active push connections:1> <2011-01-12 11:35:02.931 GMT>:[3939]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, added server-initiated connection = -1848311806, push id = pushID:sdfsdfwerwer> <2011-01-12 11:35:03.240 GMT>:[3940]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, EVENT = CreatedSendingQueue, DEVICEPIN = 22d7f6bd, USERID = u3> <2011-01-12 11:35:03.241 GMT>:[3941]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, EVENT = Sending, TAG = 536543251, DEVICEPIN = 22d7f6bd, USERID = u3, VERSION = 16, CONNECTIONID = -1848311806, SEQUENCE = 0, TYPE = NOTIFY-REQUEST, CONNECTIONHANDLER = http, PROTOCOL = TCP, PARAMETERS = [LDN-Server1/192.168.1.240:7874], SIZE = 383> <2011-01-12 11:35:03.241 GMT>:[3942]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Number of active push connections:0> <2011-01-12 11:35:03.253 GMT>:[3943]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SRP, SRPID = S27700165[LDN-SERVER1:3200], EVENT = Sending, VERSION = 1, COMMAND = SEND, TAG = 536543251, SIZE = 570> <2011-01-12 11:35:03.838 GMT>:[3944]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SRP, SRPID = S27700165[LDN-SERVER1:3200], EVENT = Receiving, VERSION = 1, COMMAND = STATUS, TAG = 536543251, SIZE = 10, STATE = DELIVERED> <2011-01-12 11:35:04.104 GMT>:[3945]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, EVENT = Notification, TAG = 536543251, STATE = DELIVERED> <2011-01-12 11:35:04.121 GMT>:[3946]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Device connections: AVG latency (msecs)893> <2011-01-12 11:35:04.135 GMT>:[3947]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<INFO >:<LAYER = IPPP, DEVICEPIN = 22d7f6bd, DOMAINNAME = LDN-Server1/192.168.1.240, CONNECTION_TYPE = PUSH_CONN, ConnectionId = -1848311806, DURATION(ms) = 1151, MFH_KBytes = 0, MTH_KBytes = 0.374, MFH_PACKET_COUNT = 0, MTH_PACKET_COUNT = 1> <2011-01-12 11:35:04.144 GMT>:[3948]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, Removed push connection:-1848311806> <2011-01-12 11:35:09.264 GMT>:[3949]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = IPPP, EVENT = RemovedSendingQueue, DEVICEPIN = 22d7f6bd, USERID = u3> <2011-01-12 11:35:58.187 GMT>:[3950]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SRP, SRPID = S27700165[LDN-SERVER1:3200], EVENT = Sending, VERSION = 1, COMMAND = INFO, SIZE = 46> <2011-01-12 11:35:58.187 GMT>:[3951]:<MDS-CS_LDN-SERVER1_MDS-CS_1>:<DEBUG>:<LAYER = SCM, Sent health to S27700165[LDN-SERVER1:3200] Health=[0x 0000 0007 0000 0000],Mask=[0x 0000 0007 0000 0000],Load=[60]> As you can see, logs not really differs, message is marked as delivered. But my app on device not really gets this message (as it works in mds simulator) Please advice me, what may be wrong? Is there some certificate to install or security settings I should configure to make this push message came to device application? Thank you! same question on bbforums

  Read the article

• Varnish cached 'MISS status' object?

  - by Hesey

  My site uses nginx, varnish, jboss. And some url will be cached by varnish, it depends a response header from jboss. The first time, jboss tells varnish doesn't cache this url. Then the second request, jboss tells varnish to cache, but varnish won't cache it. I used varnishstat and found that 1 object is cached in Varnish, is that the 'MISS status' object? I remove grace code and the problem still exists. When I PURGE this url, varnish works fine and cache the url then. But I can't PURGE so much urls every startup time, how can I fix this? The configuration: acl local { "localhost"; } backend default { .host = "localhost"; .port = "8080"; .probe = { .url = "/preload.htm"; .interval = 3s; .timeout = 1s; .window = 5; .threshold = 3; } } sub vcl_deliver { if (req.request == "PURGE") { remove resp.http.X-Varnish; remove resp.http.Via; remove resp.http.Age; remove resp.http.Content-Type; remove resp.http.Server; remove resp.http.Date; remove resp.http.Accept-Ranges; remove resp.http.Connection; set resp.http.keeplive="true"; } else { if (obj.hits > 0) { set resp.http.X-Cache = "HIT"; } else { set resp.http.X-Cache = "MISS"; } } } sub vcl_recv { if(req.url ~ "/check.htm"){ error 404 "N"; } if( req.http.host ~ "store." || req.request == "POST"){ return (pipe); } if (req.backend.healthy) { set req.grace = 30s; } else { set req.grace = 10m; } set req.http.x-cacheKey = "0"; if(req.url ~ "/shop/view_shop.htm" || req.url ~ "/shop/viewShop.htm" || req.url ~ "/index.htm"){ if(req.url ~ "search=y"){ set req.http.x-cacheKey = req.http.host + "/search.htm"; }else if(req.url !~ "bbs=y" && req.url !~ "shopIntro=y" && req.url !~ "shop_intro=y"){ set req.http.x-cacheKey = req.http.host + "/index.htm"; } }else if(req.url ~ "/search"){ set req.http.x-cacheKey = req.http.host + "/search.htm"; } if( req.http.x-cacheKey == "0" && req.url !~ "/i/"){ return (pipe); } if (req.request == "PURGE") { if (client.ip ~ local) { return (lookup); } else { error 405 "Not allowed."; } } if (req.url ~ "/i/") { set req.http.x-shop-url = req.original_url; }else { unset req.http.cookie; } } sub vcl_fetch { set beresp.grace = 10m; #unset beresp.http.x-cacheKey; if (req.url ~ "/i/" || req.url ~ "status" ){ set beresp.ttl = 0s; /* ttl=0 for dynamic content */ } else if(beresp.http.x-varnish-cache != "1"){ set beresp.do_esi = true; /* Do ESI processing */ set beresp.ttl = 0s; unset beresp.http.set-cookie; } else { set beresp.do_esi = true; /* Do ESI processing */ set beresp.ttl = 1800s; unset beresp.http.set-cookie; } } sub vcl_hash { hash_data(req.http.x-cacheKey); return (hash); } sub vcl_error { if (req.request == "PURGE") { return (deliver); } else { set obj.http.Content-Type = "text/html; charset=gbk"; synthetic {"<!--ve-->"}; return (deliver); } } sub vcl_hit { if (req.request == "PURGE") { set obj.ttl = 0s; error 200 "Purged."; } } sub vcl_miss { if (req.request == "PURGE") { error 404 "N"; } }

  Read the article

• Squid 2.7.STABLE3-4.1 as a transparent proxy on Ubuntu Server 9.04

  - by LOGIC9

  Can't get this to work at all! I'm trying to get this linux box to act as a transparent proxy and, with the help of DHCP, force everyone on the network to gate into the proxy. I have two ethernet connections, both to the same switch. And I'm trying to get 192.168.1.234 to become the default gateway. The actual WAN connection is to a gateway 192.168.1.1. eth0 is 192.168.1.234 eth1 is 192.168.1.2 Effectively I'm trying to make eth0 a LAN only interface and eth1 a WAN interface. I've oi should set the gateway for eth1 to point to 192.168.1.234 my squid.conf file has the following directives added at the bottom: nly set eth0 to have a gateway address in /etc/network/interfaces I'm not sure whether http_port 3128 transparent acl lan src 192.168.1.0/24 acl lh src 127.0.0.1/255.255.255.0 http_access allow lan http_access allow lh i've added the following routing commands: iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.1.2:3128 iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 I set a computer with TCP settings 192.168.1.234 as the gateway and opened up google.com, but it comes up with a request error. Any ideas why this isn't working? :( Been searching continuously for a solution to no avail. ----------------------------- EDIT ------------------------------- Managed to get it to route properly to the squid, here's the error I get in the browser: ERROR The requested URL could not be retrieved While trying to process the request: GET / HTTP/1.1 Host: www.google.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-GB; rv:1.9.1.2) Gecko/20090729 Firefox/3.5.2 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-gb,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 300 Connection: keep-alive Cache-Control: max-age=0 The following error was encountered: * Invalid Request Some aspect of the HTTP Request is invalid. Possible problems: * Missing or unknown request method * Missing URL * Missing HTTP Identifier (HTTP/1.0) * Request is too large * Content-Length missing for POST or PUT requests * Illegal character in hostname; underscores are not allowed Your cache administrator is webmaster. Generated Mon, 26 Oct 2009 03:41:15 GMT by mjolnir.lloydharrington.local (squid/2.7.STABLE3)

  Read the article

• Building KPIs to monitor your business Its not really about the Technology

  When I have discussions with people about Business Intelligence, one of the questions the inevitably come up is about building KPIs and how to accomplish that. From a technical level the concept of a KPI is very simple, almost too simple in that it is like the tip of an iceberg floating above the water. The key to that iceberg is not really the tip, but the mass of the iceberg that is hidden beneath the surface upon which the tip sits. The analogy of the iceberg is not meant to indicate that the foundation of the KPI is overly difficult or complex. The disparity in size in meant to indicate that the larger thing that needs to be defined is not the technical tip, but the underlying business definition of what the KPI means. From a technical perspective the KPI consists of primarily the following items: Actual Value This is the actual value data point that is being measured. An example would be something like the amount of sales. Target Value This is the target goal for the KPI. This is a number that can be measured against Actual Value. An example would be $10,000 in monthly sales. Target Indicator Range This is the definition of ranges that define what type of indicator the user will see comparing the Actual Value to the Target Value. Most often this is defined by stoplight, but can be any indicator that is going to show a status in a quick fashion to the user. Typically this would be something like: Red Light = Actual Value more than 5% below target; Yellow Light = Within 5% of target either direction; Green Light = More than 5% higher than Target Value Status\Trend Indicator This is an optional attribute of a KPI that is typically used to show some kind of trend. The vast majority of these indicators are used to show some type of progress against a previous period. As an example, the status indicator might be used to show how the monthly sales compare to last month. With this type of indicator there needs to be not only a definition of what the ranges are for your status indictor, but then also what value the number needs to be compared against. So now we have an idea of what data points a KPI consists of from a technical perspective lets talk a bit about tools. As you can see technically there is not a whole lot to them and the choice of technology is not as important as the definition of the KPIs, which we will get to in a minute. There are many different types of tools in the Microsoft BI stack that you can use to expose your KPI to the business. These include Performance Point, SharePoint, Excel, and SQL Reporting Services. There are pluses and minuses to each technology and the right technology is based a lot on your goals and how you want to deliver the information to the users. Additionally, there are other non-Microsoft tools that can be used to expose KPI indicators to your business users. Regardless of the technology used as your front end, the heavy lifting of KPI is in the business definition of the values and benchmarks for that KPI. The discussion about KPIs is very dependent on the history of an organization and how much they are exposed to the attributes of a KPI. Often times when discussing KPIs with a business contact who has not been exposed to KPIs the discussion tends to also be a session educating the business user about what a KPI is and what goes into the definition of a KPI. The majority of times the business user has an idea of what their actual values are and they have been tracking those numbers for some time, generally in Excel and all manually. So they will know the amount of sales last month along with sales two years ago in the same month. Where the conversation tends to get stuck is when you start discussing what the target value should be. The actual value is answering the What and How much questions. When you are talking about the Target values you are asking the question Is this number good or bad. Typically, the user will know whether or not the value is good or bad, but most of the time they are not able to quantify what is good or bad. Their response is usually something like I just know. Because they have been watching the sales quantity for years now, they can tell you that a 5% decrease in sales this month might actually be a good thing, maybe because the salespeople are all waiting until next month when the new versions come out. It can sometimes be very hard to break the business people of this habit. One of the fears generally is that the status indicator is not subjective. Thus, in the scenario above, the business user is going to be fearful that their boss, just looking at a negative red indicator, is going to haul them out to the woodshed for a bad month. But, on the flip side, if all you are displaying is the amount of sales, only a person with knowledge of last month sales and the target amount for this month would have any idea if $10,000 in sales is good or not. Here is where a key point about KPIs needs to be communicated to both the business user and any user who might be viewing the results of that KPI. The KPI is just one tool that is used to report on business performance. The KPI is meant as a quick indicator of one business statistic. It is not meant to tell the entire story. It does not answer the question Why. Its primary purpose is to objectively and quickly expose an area of the business that might warrant more review. There is always going to be the need to do further analysis on any potential negative or neutral KPI. So, hopefully, once you have convinced your business user to come up with some target numbers and ranges for status indicators, you then need to take the next step and help them answer the Why question. The main question here to ask is, Okay, you see the indicator and you need to discover why the number is what is, where do you go?. The answer is usually a combination of sources. A sales manager might have some of the following items at their disposal (Marketing report showing a decrease in the promotional discounts for the month, Pricing Report showing the reduction of prices of older models, an Inventory Report showing the discontinuation of a particular product line, or a memo showing the ending of a large affiliate partnership. The answers to the question Why are never as simple as a single indicator value. Bring able to quickly get to this information is all about designing how a user accesses the KPIs and then also how easily they can get to the additional information they need. This is where a Dashboard mentality can come in handy. For example, the business user can have a dashboard that shows their KPIs, but also has links to some of the common reports that they run regarding Sales Data. The users boss may have the same KPIs on their dashboard, but instead of links to individual reports they are going to have a link to a status report that was created by the user that pulls together all the data about the KPI in a summary format the users boss can review. So some of the key things to think about when building or evaluating KPIs for your organization: Technology should not be the driving factor KPIs are of little value without some indicator for whether a value is good, bad or neutral. KPIs only give an answer to the Is this number good\bad? question Make sure the ability to drill into the Why of a KPI is close at hand and relevant to the user who is viewing the KPI. The KPI is a key business tool when defined properly to help monitor business performance across the enterprise in an objective and consistent manner. At times it might feel like the process of defining the business aspects of a KPI can sometimes be arduous, the payoff in the end can far outweigh the costs. Some of the benefits of going through this process are a better understanding of the key metrics for an organization and the measure of those metrics and a consistent snapshot of business performance that can be utilized across the organization. And I think that these are benefits to any organization regardless of the technology or the implementation.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

  - by Paul J. Warner

  I am having an issue with a program where after 6 mins +- 5 secs we get the above exception. Some more info about the exception stacktrace is below. This all happens pretty religiously, 6 mins goes by and bam the following 3 exeptions. We have the application installed in 2 other environments and it is working fine there. I am hoping to find some server settings either IIS 6 or Server 2003 settings that may be causing this issue to occur. I have reviewed some of the similar questions and don't see very many answers. I am hoping that maybe the information I have provided may help a little bit. 208741,Exception,,,,2011-06-21 00:30:14.193,SERVERNAME,2624,1,CLIENTNAME,The underlying connection was closed: An unexpected error occurred on a receive. , at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request) at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request) at Microsoft.Web.Services3.WebServicesClientProtocol.GetResponse(WebRequest request, IAsyncResult result) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208742,Exception,,,,2011-06-21 00:30:14.227,SERVERNAME,2624,1,CLIENTNAME,Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.FixedSizeReader.ReadPacket(Byte[] buffer, Int32 offset, Int32 count) at System.Net.Security._SslStream.StartFrameHeader(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.StartReading(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security._SslStream.ProcessRead(Byte[] buffer, Int32 offset, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.TlsStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Read(Byte[] buffer, Int32 offset, Int32 size) at System.Net.Connection.SyncRead(HttpWebRequest request, Boolean userRetrievedStream, Boolean probeRead),2004437127,114,1 208743,Exception,,,,2011-06-21 00:30:14.287,SERVERNAME,2624,1,CLIENTNAME,An existing connection was forcibly closed by the remote host , at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size),-691097507,62,1

  Read the article

• Force SSL on one page via .htaccess without looping

  - by Will Martin

  Okay, I have this code: RewriteCond %{HTTPS} off RewriteCond %{REQUEST_URI} ^/borrowing/ill/request\.php$ RewriteRule ^.*$ https://%{HTTP_HOST}%{REQUEST_URI} [R,L] The way I would expect this to work is: A request for /borrowing/ill/request.php comes in on HTTP. The rule matches. The server redirects to HTTPS. The rule does not match, because HTTPS is now on. The way it actually works is: A request for /borrowing/ill/request.php comes in on HTTP. The rule matches. The server redirects to HTTPS. The rule matches. The server redirects to HTTPS. The rule matches. The server redirects to HTTPS ... And so on. I know that the second condition (matching the file name) is working, because the redirect loop only hits that specific page. The question is, why isn't the switch to HTTPS causing the first condition to not match? EDIT: I put the exact same .htaccess rules into a test area on another server -- same file and path info. And they worked just fine. There's got to be something wrong with the server configuration elsewhere.

  Read the article

• Pfsense 2.1 OpenVPN can't reach servers on the LAN

  - by Lucas Kauffman

  I have a small network set up like this: I have a Pfsense for connecting my servers to the WAN, they are using NAT from the LAN - WAN. I have an OpenVPN server using TAP to allow remote workers to be put on the same LAN network as the servers. They connect through the WAN IP to the OVPN interface. The LAN interface also servers as the gateway for the servers to get internet connection and has an IP of 10.25.255.254 The OVPN Interface and the LAN interface are bridged in BR0 Server A has an IP of 10.25.255.1 and is able to connect the internet Client A is connecting through the VPN and is assigned an IP address on its TAP interface of 10.25.24.1 (I reserved a /24 within the 10.25.0.0/16 for VPN clients) Firewall currently allows any-any connection OVPN towards LAN and vice versa Currently when I connect, all routes seem fine on the client side: Destination Gateway Genmask Flags Metric Ref Use Iface 300.300.300.300 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.25.0.0 10.25.255.254 255.255.0.0 UG 0 0 0 tap0 10.25.0.0 0.0.0.0 255.255.0.0 U 0 0 0 tap0 0.0.0.0 300.300.300.300 0.0.0.0 UG 0 0 0 eth0 I can ping the LAN interface: root@server:# ping 10.25.255.254 PING 10.25.255.254 (10.25.255.254) 56(84) bytes of data. 64 bytes from 10.25.255.254: icmp_req=1 ttl=64 time=7.65 ms 64 bytes from 10.25.255.254: icmp_req=2 ttl=64 time=7.49 ms 64 bytes from 10.25.255.254: icmp_req=3 ttl=64 time=7.69 ms 64 bytes from 10.25.255.254: icmp_req=4 ttl=64 time=7.31 ms 64 bytes from 10.25.255.254: icmp_req=5 ttl=64 time=7.52 ms 64 bytes from 10.25.255.254: icmp_req=6 ttl=64 time=7.42 ms But I can't ping past the LAN interface: root@server:# ping 10.25.255.1 PING 10.25.255.1 (10.25.255.1) 56(84) bytes of data. From 10.25.255.254: icmp_seq=1 Redirect Host(New nexthop: 10.25.255.1) From 10.25.255.254: icmp_seq=2 Redirect Host(New nexthop: 10.25.255.1) I ran a tcpdump on my em1 interface (LAN interface which has the IP of 10.25.255.254) tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on em1, link-type EN10MB (Ethernet), capture size 96 bytes 08:21:13.449222 IP 10.25.24.1 > 10.25.255.1: ICMP echo request, id 23623, seq 10, length 64 08:21:13.458211 ARP, Request who-has 10.25.255.1 tell 10.25.24.1, length 28 08:21:14.450541 IP 10.25.24.1 > 10.25.255.1: ICMP echo request, id 23623, seq 11, length 64 08:21:14.458431 ARP, Request who-has 10.25.255.1 tell 10.25.24.1, length 28 08:21:15.451794 IP 10.25.24.1 > 10.25.255.1: ICMP echo request, id 23623, seq 12, length 64 08:21:15.458530 ARP, Request who-has 10.25.255.1 tell 10.25.24.1, length 28 08:21:16.453203 IP 10.25.24.1 > 10.25.255.1: ICMP echo request, id 23623, seq 13, length 64 So traffic is reaching the LAN interface, but it's not getting passed it. But no answer from the 10.25.255.1 host. I'm not sure what I'm missing.

  Read the article

• Diagnosing xmodmap errors

  - by intuited

  I'm getting this error when trying to use xmodmap to get rid of caps lock: $ xmodmap -e 'clear Lock' X Error of failed request: BadValue (integer parameter out of range for operation) Major opcode of failed request: 118 (X_SetModifierMapping) Value in failed request: 0x17 Serial number of failed request: 8 Current serial number in output stream: 8 I'm running xfce on Maverick "10.10" Meercat. This problem did not occur before I added the Keyboard Layouts applet to a panel; before doing that, I was able to run my xmodmap script to swap Esc and CapsLock: !Remap Caps_Lock as Escape remove Lock = Caps_Lock keysym Caps_Lock = Escape It may be relevant that I chose alt-capslock as the keyboard switch combo in the Keyboard Layouts preferences. I've had a similar problem before, on a different machine, running openbox. On that machine, this problem started when I upgraded to Lucid, and has persisted in Maverick (release 10.10). I reported a bug in xorg. However, it remains unclear whether it's really a problem with xorg, or if I'm just doing something wrong with my configuration. Have other people experienced this problem? Can someone shed some light on what's going on here? It seems there are quite a few layers involved, and I don't understand any of them particularly well, so any information would be helpful. update I've discovered that the problem is specifically triggered by adding the Canada layout variant "Multilingual" (ca-multix). If I instead add the variant "Multilingual (first part)", the problem does not occur. I think this will probably end up being a usable workaround, but I don't yet know what the difference between these variants is. I've filed a freedesktop issue, and am commenting on a related ubuntu issue.

  Read the article

• pasenger does not start puppet master under nginx

  - by Anadi Misra

  On the server [root@bangvmpllDA02 logs]# ruby -v ruby 1.8.7 (2011-06-30 patchlevel 352) [x86_64-linux] [root@bangvmpllDA02 logs]# puppet --version 3.0.1 and [root@bangvmpllDA02 logs]# service nginx configtest nginx: the configuration file /apps/nginx/nginx.conf syntax is ok nginx: configuration file /apps/nginx/nginx.conf test is successful [root@bangvmpllDA02 logs]# service nginx status nginx (pid 25923 25921 25920 25917 25908) is running... [root@bangvmpllDA02 logs]# however none of my agents are able to connect to the master, they all fail with errors like so [amisr1@blramisr195602 ~]$ puppet agent --test --verbose --server bangvmpllda02.XXX.com Info: Creating a new SSL certificate request for blramisr195602.XXX.com Info: Certificate Request fingerprint (SHA256): 26:EB:08:1F:82:32:E4:03:7A:64:8E:30:A3:99:93:26:E6:66:B9:B0:49:B6:08:F9:67:CA:1B:0C:00:B9:1D:41 Error: Could not request certificate: Error 405 on SERVER: <html> <head><title>405 Not Allowed</title></head> <body bgcolor="white"> <center><h1>405 Not Allowed</h1></center> <hr><center>nginx</center> </body> </html> Exiting; failed to retrieve certificate and waitforcert is disabled when I check logs on puppet master [root@bangvmpllDA02 logs]# tail puppet_access.log [05/Dec/2012:17:45:18 +0530] "GET /production/certificate/ca? HTTP/1.1" 404 162 "-" "Ruby" [05/Dec/2012:18:32:23 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1" 404 162 "-" "-" [05/Dec/2012:18:33:33 +0530] "PUT /production/certificate_request/sl63anadi.XXX.com HTTP/1.1" 405 166 "-" "-" and the error logs show that nginx is not really able to process the request well 2012/12/05 18:33:33 [error] 25920#0: *23 open() "/etc/puppet/rack/public/production/certificate/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:33:33 [error] 25920#0: *24 open() "/etc/puppet/rack/public/production/certificate_request/sl63anadi.XXX.com" failed (2: No such file or directory), client: 10.209.47.26, server: , request: "GET /production/certificate_request/sl63anadi.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *27 open() "/etc/puppet/rack/public/production/certificate/ca" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate/ca? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" 2012/12/05 18:47:56 [error] 25923#0: *28 open() "/etc/puppet/rack/public/production/certificate_request/blramisr195602.XXX.com" failed (2: No such file or directory), client: 10.209.47.31, server: , request: "GET /production/certificate_request/blramisr195602.XXX.com? HTTP/1.1", host: "bangvmpllda02.XXX.com:8140" Passenger does not show any application groups either [root@bangvmpllDA02 nginx]# passenger-status ----------- General information ----------- max = 15 count = 0 active = 0 inactive = 0 Waiting on global queue: 0 ----------- Application groups ----------- [root@bangvmpllDA02 nginx]# here's my nginx configuration [root@bangvmpllDA02 logs]# cat ../nginx.conf user puppet; worker_processes 4; #error_log logs/error.log; #error_log logs/error.log notice; error_log logs/error.log info; #pid logs/nginx.pid; events { use epoll; worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; server_tokens off; #keepalive_timeout 0; keepalive_timeout 120; gzip on; gzip_http_version 1.1; gzip_disable "msie6"; gzip_vary on; gzip_min_length 1100; gzip_buffers 64 8k; gzip_comp_level 3; gzip_proxied any; gzip_types text/plain text/css application/x-javascript text/xml application/xml; server { listen 80; server_name bangvmpllda02.XXXX.com; charset utf-8; #access_log logs/http.access.log main; location / { root html; index index.html index.htm index.php; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { root html; fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param SCRIPT_NAME $fastcgi_script_name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { access_log off; log_not_found off; deny all; } location ~* \.(jpg|jpeg|gif|png|css|js|ico|xml)$ { access_log off; log_not_found off; expires 2d; } } # Passenger needed for puppet passenger_root /usr/lib/ruby/gems/1.8/gems/passenger-3.0.18; passenger_ruby /usr/bin/ruby; passenger_max_pool_size 15; server { ssl on; listen 8140 default ssl; server_name bangvmpllda02.XXXX.com; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /etc/puppet/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } } and the puppet.conf [main] # The Puppet log directory. # The default value is '$vardir/log'. logdir = /var/log/puppet # Where Puppet PID files are kept. # The default value is '$vardir/run'. rundir = /var/run/puppet dns_alt_names = devops.XXXX.com,devops confdir = /etc/puppet vardir = /var/lib/puppet storeconfigs = true storeconfigs_backend = puppetdb thin_storeconfigs = false async_storeconfigs = false ssl_client_header = SSL_CLIENT_S_D ssl_client_verify_header = SSL_CLIENT_VERIFY # Where SSL certificates are kept. # The default value is '$confdir/ssl'. ssldir = $vardir/ssl any ideas where am I going wrong? I checkthe directory permissions; /usr/share/puppet, /etc/puppet and /var/lib/puppet (and files inside them) are owned by puppet user.

  Read the article

• Partner Infoline & Service Portal

  - by uwes

  As an EMEA-wide team we're supporting the daily work of our partners. Our team consists of 24 sales consultants, one third is specialized on the Partner Infoline. Partner Infoline's main focus is to deliver actively and reactively technical pre sales knowledge about the Oracle hardware portfolio to our partners.With infoline we assist our partners in their daily work, furthermore we help to educate our partners to be self sufficient in all aspects and questions about hardware configurations and hardware quotes. For our Infoline Service we use a ticketing system called Service Portal which is widely used within Oracle and delivers a good and stable functionality and availability. Our Infoline-Service provides answers to questions concerning technical pre-sales matters that are related to hardware and the corresponding hardware related software.* You can address these types of questions by sending them to our mailing list: [email protected] The serviceportal will send you an auto-reply including a unique reference number, which will be the identification for your request until it is closed. Depending on the complexity of the request, it might be necessary to forward it to our specialists (servers, storage, tape, Solaris etc.) located whole over Europe. In order to make the whole process smooth here are some recommendations: write your request in English; saves translation-time, when it has to be forwarded to the specialists stating clearly in the title your interest area, like for example "memory in M4000 server". one request/one subject; makes it easier to maintain and keep the correspondence clear and simple. The rule of the service is to provide an answer quick, which means the vast majority of the requests are answered within a couple of hours. However please keep in mind that some requests may need extra work by involving the appropriate person within Europe or even in US. Therefore there is no official SLA for this service. * This excludes Oracle "classic" products and post-sales support. The latter should still be addressed through MOS (http://support.oracle.com)

  Read the article

• A Good Developer is So Hard to Find

  - by James Michael Hare

  Let me start out by saying I want to damn the writers of the Toughest Developer Puzzle Ever – 2. It is eating every last shred of my free time! But as I've been churning through each puzzle and marvelling at the brain teasers and trivia within, I began to think about interviewing developers and why it seems to be so hard to find good ones.  The problem is, it seems like no matter how hard we try to find the perfect way to separate the chaff from the wheat, inevitably someone will get hired who falls far short of expectations or someone will get passed over for missing a piece of trivia or a tricky brain teaser that could have been an excellent team member.   In shops that are primarily software-producing businesses or other heavily IT-oriented businesses (Microsoft, Amazon, etc) there often exists a much tighter bond between HR and the hiring development staff because development is their life-blood. Unfortunately, many of us work in places where IT is viewed as a cost or just a means to an end. In these shops, too often, HR and development staff may work against each other due to differences in opinion as to what a good developer is or what one is worth.  It seems that if you ask two different people what makes a good developer, often you will get three different opinions.   With the exception of those shops that are purely development-centric (you guys have it much easier!), most other shops have management who have very little knowledge about the development process.  Their view can often be that development is simply a skill that one learns and then once aquired, that developer can produce widgets as good as the next like workers on an assembly-line floor.  On the other side, you have many developers that feel that software development is an art unto itself and that the ability to create the most pure design or know the most obscure of keywords or write the shortest-possible obfuscated piece of code is a good coder.  So is it a skill?  An Art?  Or something entirely in between?   Saying that software is merely a skill and one just needs to learn the syntax and tools would be akin to saying anyone who knows English and can use Word can write a 300 page book that is accurate, meaningful, and stays true to the point.  This just isn't so.  It takes more than mere skill to take words and form a sentence, join those sentences into paragraphs, and those paragraphs into a document.  I've interviewed candidates who could answer obscure syntax and keyword questions and once they were hired could not code effectively at all.  So development must be more than a skill.   But on the other end, we have art.  Is development an art?  Is our end result to produce art?  I can marvel at a piece of code -- see it as concise and beautiful -- and yet that code most perform some stated function with accuracy and efficiency and maintainability.  None of these three things have anything to do with art, per se.  Art is beauty for its own sake and is a wonderful thing.  But if you apply that same though to development it just doesn't hold.  I've had developers tell me that all that matters is the end result and how you code it is entirely part of the art and I couldn't disagree more.  Yes, the end result, the accuracy, is the prime criteria to be met.  But if code is not maintainable and efficient, it would be just as useless as a beautiful car that breaks down once a week or that gets 2 miles to the gallon.  Yes, it may work in that it moves you from point A to point B and is pretty as hell, but if it can't be maintained or is not efficient, it's not a good solution.  So development must be something less than art.   In the end, I think I feel like development is a matter of craftsmanship.  We use our tools and we use our skills and set about to construct something that satisfies a purpose and yet is also elegant and efficient.  There is skill involved, and there is an art, but really it boils down to being able to craft code.  Crafting code is far more than writing code.  Anyone can write code if they know the syntax, but so few people can actually craft code that solves a purpose and craft it well.  So this is what I want to find, I want to find code craftsman!  But how?   I used to ask coding-trivia questions a long time ago and many people still fall back on this.  The thought is that if you ask the candidate some piece of coding trivia and they know the answer it must follow that they can craft good code.  For example:   What C++ keyword can be applied to a class/struct field to allow it to be changed even from a const-instance of that class/struct?  (answer: mutable)   So what do we prove if a candidate can answer this?  Only that they know what mutable means.  One would hope that this would infer that they'd know how to use it, and more importantly when and if it should ever be used!  But it rarely does!  The problem with triva questions is that you will either: Approve a really good developer who knows what some obscure keyword is (good) Reject a really good developer who never needed to use that keyword or is too inexperienced to know how to use it (bad) Approve a really bad developer who googled "C++ Interview Questions" and studied like hell but can't craft (very bad) Many HR departments love these kind of tests because they are short and easy to defend if a legal issue arrises on hiring decisions.  After all it's easy to say a person wasn't hired because they scored 30 out of 100 on some trivia test.  But unfortunately, you've eliminated a large part of your potential developer pool and possibly hired a few duds.  There are times I've hired candidates who knew every trivia question I could throw out them and couldn't craft.  And then there are times I've interviewed candidates who failed all my trivia but who I took a chance on who were my best finds ever.    So if not trivia, then what?  Brain teasers?  The thought is, these type of questions measure the thinking power of a candidate.  The problem is, once again, you will either: Approve a good candidate who has never heard the problem and can solve it (good) Reject a good candidate who just happens not to see the "catch" because they're nervous or it may be really obscure (bad) Approve a candidate who has studied enough interview brain teasers (once again, you can google em) to recognize the "catch" or knows the answer already (bad). Once again, you're eliminating good candidates and possibly accepting bad candidates.  In these cases, I think testing someone with brain teasers only tests their ability to answer brain teasers, not the ability to craft code. So how do we measure someone's ability to craft code?  Here's a novel idea: have them code!  Give them a computer and a compiler, or a whiteboard and a pen, or paper and pencil and have them construct a piece of code.  It just makes sense that if we're going to hire someone to code we should actually watch them code.  When they're done, we can judge them on several criteria: Correctness - does the candidate's solution accurately solve the problem proposed? Accuracy - is the candidate's solution reasonably syntactically correct? Efficiency - did the candidate write or use the more efficient data structures or algorithms for the job? Maintainability - was the candidate's code free of obfuscation and clever tricks that diminish readability? Persona - are they eager and willing or aloof and egotistical?  Will they work well within your team? It may sound simple, or it may sound crazy, but when I'm looking to hire a developer, I want to see them actually develop well-crafted code.

  Read the article

• Admob banner not getting remove from superview

  - by Anil gupta

  I am developing one 2d game using cocos2d framework, in this game i am using admob for advertising, in some classes not in all classes but admob banner is visible in every class and after some time game getting crash also. I am not getting how admob banner is comes in every class in fact i have not declare in Rootviewcontroller class. can any one suggest me how to integrate Admob in cocos2d game, i want Admob banner in particular classes not in every class, I am using latest google admob sdk, my code is below: Thanks in advance ` -(void)AdMob{ NSLog(@"ADMOB"); CGSize winSize = [[CCDirector sharedDirector]winSize]; // Create a view of the standard size at the bottom of the screen. if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad){ bannerView_ = [[GADBannerView alloc] initWithFrame:CGRectMake(size.width/2-364, size.height - GAD_SIZE_728x90.height, GAD_SIZE_728x90.width, GAD_SIZE_728x90.height)]; } else { // It's an iPhone bannerView_ = [[GADBannerView alloc] initWithFrame:CGRectMake(size.width/2-160, size.height - GAD_SIZE_320x50.height, GAD_SIZE_320x50.width, GAD_SIZE_320x50.height)]; } if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPad) { bannerView_.adUnitID =@"a15062384653c9e"; } else { bannerView_.adUnitID =@"a15062392a0aa0a"; } bannerView_.rootViewController = self; [[[CCDirector sharedDirector]openGLView]addSubview:bannerView_]; [bannerView_ loadRequest:[GADRequest request]]; GADRequest *request = [[GADRequest alloc] init]; request.testing = [NSArray arrayWithObjects: GAD_SIMULATOR_ID, nil]; // Simulator [bannerView_ loadRequest:request]; } //best practice for removing the barnnerView_ -(void)removeSubviews{ NSArray* subviews = [[CCDirector sharedDirector]openGLView].subviews; for (id SUB in subviews){ [(UIView*)SUB removeFromSuperview]; [SUB release]; } NSLog(@"remove from view"); } //this makes the refreshTimer count -(void)targetMethod:(NSTimer *)theTimer{ //INCREASE OF THE TIMER AND SECONDS elapsedTime++; seconds++; //INCREASE OF THE MINUTOS EACH 60 SECONDS if (seconds>=60) { seconds=0; minutes++; [self removeSubviews]; [self AdMob]; } NSLog(@"TIME: %02d:%02d", minutes, seconds); } `

  Read the article

• Mod Rewrite - directing HTTP/HTTPS traffic to the appropriate virtual hosts

  - by kce

  I have an Apache2 web server (v. 2.2.16) running on Debian hosting three virtual hosts. The first two hosts are HTTP only (server1 and server2). The last host is HTTPS only (server3). My virtual host configuration files can be found at pastebin. I would like to use mod rewrite to get the following behavior: Any request for http://server3 is re-directed to https://server3 Any request for either https://server1 or https://server2 is re-directed to http://server1 or http://server2 as appropriate. Currently, requesting http://server3 gives you a 403 because indexing is disabled for that host and a request for https://server1 or https://server2 will resolve as https://server3 (as its the only virtual host running SSL). This behavior is not desirable. So far I have added a rewrite rule to the central configuration file (myServerWideConfs.conf), with unfortunately no effect. I was under the impression that this rule (or something similar) should rewrite all https:// requests for server1 and server2 to the proper http:// request. RewriteEngine On RewriteCond %{HTTP_HOST} !^server3 [NC] RewriteRule (.*) http://%{HTTP_HOST} My question is two-fold: What mod rewrite rules should I use to accomplish this? And where should they go? Debian's packaging of Apache has a pretty granular (i.e., fractured) configuration file layout; should my rewrite rules go in /etc/apache2/apache2.conf, /etc/apache2/conf.d/myServerWideConfs.conf, or the individual virtual host files? Is mod rewrite the right tool to accomplish this or am I missing something in my greater apache configuration?

  Read the article

• ownCloud WebDAV interface seems to be broken

  - by Nobleleader13245

  I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : https://cloud.mcsoftworks.net/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files from here https://cloud.mcsoftworks.net/ the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

  Read the article

• ownCloud WebDAV interface seems to be broken

  - by Nobleleader13245

  I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : [hostname]/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files the web version of ownCloud the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

  Read the article

• puppet master REST API returns 403 when running under passenger works when master runs from command line

  - by Anadi Misra

  I am using the standard auth.conf provided in puppet install for the puppet master which is running through passenger under Nginx. However for most of the catalog, files and certitifcate request I get a 403 response. ### Authenticated paths - these apply only when the client ### has a valid certificate and is thus authenticated # allow nodes to retrieve their own catalog path ~ ^/catalog/([^/]+)$ method find allow $1 # allow nodes to retrieve their own node definition path ~ ^/node/([^/]+)$ method find allow $1 # allow all nodes to access the certificates services path ~ ^/certificate_revocation_list/ca method find allow * # allow all nodes to store their reports path /report method save allow * # unconditionally allow access to all file services # which means in practice that fileserver.conf will # still be used path /file allow * ### Unauthenticated ACL, for clients for which the current master doesn't ### have a valid certificate; we allow authenticated users, too, because ### there isn't a great harm in letting that request through. # allow access to the master CA path /certificate/ca auth any method find allow * path /certificate/ auth any method find allow * path /certificate_request auth any method find, save allow * path /facts auth any method find, search allow * # this one is not stricly necessary, but it has the merit # of showing the default policy, which is deny everything else path / auth any Puppet master however does not seems to be following this as I get this error on client [amisr1@blramisr195602 ~]$ sudo puppet agent --no-daemonize --verbose --server bangvmpllda02.XXXXX.com [sudo] password for amisr1: Starting Puppet client version 3.0.1 Warning: Unable to fetch my node definition, but the agent run will continue: Warning: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /certificate_revocation_list/ca [find] at :110 Info: Retrieving plugin Error: /File[/var/lib/puppet/lib]: Failed to generate additional resources using 'eval_generate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [search] at :110 Error: /File[/var/lib/puppet/lib]: Could not evaluate: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Could not retrieve file metadata for puppet://devops.XXXXX.com/plugins: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /file_metadata/plugins [find] at :110 Error: Could not retrieve catalog from remote server: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /catalog/blramisr195602.XXXXX.com [find] at :110 Using cached catalog Error: Could not retrieve catalog; skipping run Error: Could not send report: Error 403 on SERVER: Forbidden request: XX.XXX.XX.XX(XX.XXX.XX.XX) access to /report/blramisr195602.XXXXX.com [save] at :110 and the server logs show XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/certificate_revocation_list/ca? HTTP/1.1" 403 102 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadatas/plugins?links=manage&recurse=true&&ignore=---+%0A++-+%22.svn%22%0A++-+CVS%0A++-+%22.git%22&checksum_type=md5 HTTP/1.1" 403 95 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:52 +0530] "GET /production/file_metadata/plugins? HTTP/1.1" 403 93 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "POST /production/catalog/blramisr195602.XXXXX.com HTTP/1.1" 403 106 "-" "Ruby" XX.XXX.XX.XX - - [10/Dec/2012:14:46:53 +0530] "PUT /production/report/blramisr195602.XXXXX.com HTTP/1.1" 403 105 "-" "Ruby" thefile server conf file is as follows (and goin by what they say on puppet site, It is better to regulate access in auth.conf for reaching file server and then allow file server to server all) [files] path /apps/puppet/files allow * [private] path /apps/puppet/private/%H allow * [modules] allow * I am using server and client version 3 Nginx has been compiled using the following options nginx version: nginx/1.3.9 built by gcc 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) TLS SNI support enabled configure arguments: --prefix=/apps/nginx --conf-path=/apps/nginx/nginx.conf --pid-path=/apps/nginx/run/nginx.pid --error-log-path=/apps/nginx/logs/error.log --http-log-path=/apps/nginx/logs/access.log --with-http_ssl_module --with-http_gzip_static_module --add-module=/usr/lib/ruby/gems/1.8/gems/passenger-3.0.18/ext/nginx --add-module=/apps/Downloads/nginx/nginx-auth-ldap-master/ and the standard nginx puppet master conf server { ssl on; listen 8140 ssl; server_name _; passenger_enabled on; passenger_set_cgi_param HTTP_X_CLIENT_DN $ssl_client_s_dn; passenger_set_cgi_param HTTP_X_CLIENT_VERIFY $ssl_client_verify; passenger_min_instances 5; access_log logs/puppet_access.log; error_log logs/puppet_error.log; root /apps/nginx/html/rack/public; ssl_certificate /var/lib/puppet/ssl/certs/bangvmpllda02.XXXXXX.com.pem; ssl_certificate_key /var/lib/puppet/ssl/private_keys/bangvmpllda02.XXXXXX.com.pem; ssl_crl /var/lib/puppet/ssl/ca/ca_crl.pem; ssl_client_certificate /var/lib/puppet/ssl/certs/ca.pem; ssl_ciphers SSLv2:-LOW:-EXPORT:RC4+RSA; ssl_prefer_server_ciphers on; ssl_verify_client optional; ssl_verify_depth 1; ssl_session_cache shared:SSL:128m; ssl_session_timeout 5m; } Puppet is picking up the correct settings from the files mentioned because config print command points to /etc/puppet [amisr1@bangvmpllDA02 puppet]$ sudo puppet config print | grep conf async_storeconfigs = false authconfig = /etc/puppet/namespaceauth.conf autosign = /etc/puppet/autosign.conf catalog_cache_terminus = store_configs confdir = /etc/puppet config = /etc/puppet/puppet.conf config_file_name = puppet.conf config_version = "" configprint = all configtimeout = 120 dblocation = /var/lib/puppet/state/clientconfigs.sqlite3 deviceconfig = /etc/puppet/device.conf fileserverconfig = /etc/puppet/fileserver.conf genconfig = false hiera_config = /etc/puppet/hiera.yaml localconfig = /var/lib/puppet/state/localconfig name = config rest_authconfig = /etc/puppet/auth.conf storeconfigs = true storeconfigs_backend = puppetdb tagmap = /etc/puppet/tagmail.conf thin_storeconfigs = false I checked the firewall rules on this VM; 80, 443, 8140, 3000 are allowed. Do I still have to tweak any specifics to auth.conf for getting this to work?

  Read the article

• Random Slow Response

  - by ARehman

  We have an ASP.NET MVC 1.0 application running on Windows Server 2008 – Standard (32 –bit), Dual Core Xeon (3.0 GHz), 2 G.B R.A.M. Most of the times application renders response in 3-4 seconds, but sometimes users get very late response and delay is up to 40 seconds or more than a minute. It happens in following way: User browsed a page, idle for 5, 10 or 15 minutes, tried to browse same page or some other. Now, there is a chance that he will see late response whereas the app pool is still up and running. This can happen with any arbitrary page. We have tried followings/observations. Moved the application to stand alone web server App Pool idle shutdown time is 60 minutes. There are no abrupt shut downs/restarts. CPU or memory doesn’t spike. No delays in SQL queries. Modified App Pool setting to run in classic-mode. It didn’t help. Plugged-in custom module to log all those requests which took more than 5 seconds to complete. It didn’t pick any request of interest. Enabled ‘Failed Request Tracing’ to log all those requests which take 20 or more seconds to complete. It didn’t log anything. Event Viewer, HTTPER log, W3SVC logs or WAS logs don’t indicate anything. HTTPERR only has ‘_ _ Timer_ConnectionIdle _ _’ entries. There is not much traffic to server. This can happen also if only two users are active. Next we captured TCP/IP terrific on both a user and server end with Wireshark and below are details in brief of this slowness: Browser sends a request for ~/User/Home/ (GET Request) by setting up a receiving end point using port 'wlbs(port-2504)'. I'm not sure if this could be a problem in some way that browser didn't hand-shake with the server first and assumed that last connection is still open, whereas, I browsed the same page 4 minutes ago and didn't perform any activity with site after that. If I see the HTTPERR log, it indicates that it has ‘_ _ Timer_ConnectionIdle _ _ _’ entry for my last activity with server. Browser (I was using Chrome) waits for any response from the server, doesn’t find any then starts retransmitting the same request using same end point after incrementing wait intervals, e.g. after 8, 18, 29, 40, 62, and 92 seconds. All these GET requests were received by server as well. But, server didn’t send any packet to client. Browser didn't see any response on the end point it set up in point 1, it opened a new end point 'optiwave-lm (port-2524)', did a hand shake with the server and transmitted the same request again. Server received, processed it, and returned successful response. What happened to earlier 6-7 requests? Whether they were passed on to HTTP.SYS or not? Why Failed Request Tracing not logged anything, we didn't find any clue yet. Server served the same page successfully just 4 minutes ago. Looking forward for more suggestions/solutions. -- Thanks

  Read the article

• Catch Me If You Can

  - by Knut Vatsendvik

  Suppose you have a Proxy based Web Service using Oracle Service Bus. In a stage in the request pipeline,  you are using a Publish action to publish the incoming message to a JMS queue using a Business Service. What if the outbound transport provider throws an exception (outside of your pipeline)? Is your pipeline able to catch the error with an error handler?? This situation could occur because of a faulty connection, suspended queue, or some other reason. Here is the Request Pipeline in our simple test case. With an Error Handler added to the message flow containing a simple Log action. By default, the Publish action will invoke the service in a fire and forget fashion. Therefore any exception that occurs in the outbound transport will go unnoticed as shown in the following Invocation Trace. So what now? In a message flow, you can apply a Routing Options action to modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority. Now add the Routing Options action to the Request Action as shown below. Click the Routing Options to display its properties in the Properties View. Select the QoS option to set the Quality of Service element. Select Exactly Once to override the default setting, and Republish the project. The invocation will now block until the message is completely processed. Trying the same test case as earlier generates the following Invocation Trace showing that the Error Handler is now triggered.

  Read the article

• Log requests in apache upon arrival

  - by Patrick Cornelissen

  Is it possible to log requests in the apache when they arrive not when they have been processed? We have a pretty big web based application and the way it's currently logged is sometimes confusing to read, because each request with it's subrequests is logged "upside down", because apache logs the request after it has been processed, so the initial request is the last entry for this "query". We're wondering if there is a chance to log on arrival?!

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >