data flow diagrams - Page 142

Handling timeout in network application

- by user2175831

How can I handle timeouts in a network application. I'm implementing a provisioning system on a Linux server, the code is huge so I'm going to put the algorithm, it works as like this Read provisioning commands from file Send it to another server using TCP Save the request in hash. Receive the response then if successful response received then remove request from hash if failed response received then retry the message The problem I'm in now is when the program didn't receive the response for a timeout reason then the request will be waiting for a response forever and won't be retried. And please note that I'll be sending hundreds of commands and I have to monitor the timeout commands for all of them. I tried to use timer but that didn't help because I'll end up with so many waiting timers and I'm not sure if this is a good way of doing this. The question is how can I save the message in some data structure and check to remove or retry it later when there is no response from the other end? Please note that I'm willing to change the algorithm to anything you suggest that could deal with the timeouts.

Read the article

encfs error while decoding the data

- by migrator

I have installed encfs and started using it to secure all my personal & office data and it was working absolutely fine until 2 hours back. The setup is like this. I have a folder in Copy folder called OfficeData which gets synchronized with my Copy folder When I login into the system I use the command encfs ~/Copy/OfficeData ~/Documents/OfficeData Once my work is over I dismount with the command fusermount -u ~/Documents/OfficeData All this data get synchronized with my desktop and with my mobile phone (as a backup) Today when I mounted, the folder got mounted by no directories and files present in that folder. I was worried and read man encfs which gave me to run the command encfs -v -f ~/Copy/OfficeData ~/Documents/OfficeData 2> encfs-OfficeData-report.txt. The below is the output of the file encfs-OfficeData-report.txt. The directory "/home/sri/Documents/OfficeData" does not exist. Should it be created? (y,n) 13:16:26 (main.cpp:523) Root directory: /home/sri/Copy/OfficeData/ 13:16:26 (main.cpp:524) Fuse arguments: (fg) (threaded) (keyCheck) encfs /home/sri/Documents/OfficeData -f -s -o use_ino -o default_permissions 13:16:26 (FileUtils.cpp:177) version = 20 13:16:26 (FileUtils.cpp:181) found new serialization format 13:16:26 (FileUtils.cpp:199) subVersion = 20100713 13:16:26 (Interface.cpp:165) checking if ssl/aes(3:0:2) implements ssl/aes(3:0:0) 13:16:26 (SSL_Cipher.cpp:370) allocated cipher ssl/aes, keySize 32, ivlength 16 13:16:26 (Interface.cpp:165) checking if ssl/aes(3:0:2) implements ssl/aes(3:0:0) 13:16:26 (SSL_Cipher.cpp:370) allocated cipher ssl/aes, keySize 32, ivlength 16 13:16:26 (FileUtils.cpp:1620) useStdin: 0 13:16:46 (Interface.cpp:165) checking if ssl/aes(3:0:2) implements ssl/aes(3:0:0) 13:16:46 (SSL_Cipher.cpp:370) allocated cipher ssl/aes, keySize 32, ivlength 16 13:16:49 (FileUtils.cpp:1628) cipher key size = 52 13:16:49 (Interface.cpp:165) checking if nameio/block(3:0:1) implements nameio/block(3:0:0) 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/UWbT-M-UKk1JpvNfN5uvOhGn: No such file or directory 13:16:49 (CipherFileIO.cpp:105) in setIV, current IV = 0, new IV = 4188221457101129840, fileIV = 0 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/UWbT-M-UKk1JpvNfN5uvOhGn 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/UWbT-M-UKk1JpvNfN5uvOhGn 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/UWbT-M-UKk1JpvNfN5uvOhGn: No such file or directory 13:16:49 (encfs.cpp:138) getattr error: No such file or directory 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/o94olxB3orqarqyFviHKZ,ZF: No such file or directory 13:16:49 (CipherFileIO.cpp:105) in setIV, current IV = 0, new IV = 16725694203599486310, fileIV = 0 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/o94olxB3orqarqyFviHKZ,ZF 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/o94olxB3orqarqyFviHKZ,ZF 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/o94olxB3orqarqyFviHKZ,ZF: No such file or directory 13:16:49 (encfs.cpp:138) getattr error: No such file or directory 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/tVglci2rgp9o8qE-m9AvX6JNj1lQs-ER0OvnxfOb30Z,3,: No such file or directory 13:16:49 (CipherFileIO.cpp:105) in setIV, current IV = 0, new IV = 1354483141023495884, fileIV = 0 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/tVglci2rgp9o8qE-m9AvX6JNj1lQs-ER0OvnxfOb30Z,3, 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/tVglci2rgp9o8qE-m9AvX6JNj1lQs-ER0OvnxfOb30Z,3, 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/tVglci2rgp9o8qE-m9AvX6JNj1lQs-ER0OvnxfOb30Z,3,: No such file or directory 13:16:49 (encfs.cpp:138) getattr error: No such file or directory 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/r1KIEqVkz-,7-6CobavHCSNn: No such file or directory 13:16:49 (CipherFileIO.cpp:105) in setIV, current IV = 0, new IV = 16720606331386655431, fileIV = 0 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/r1KIEqVkz-,7-6CobavHCSNn 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/r1KIEqVkz-,7-6CobavHCSNn 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/r1KIEqVkz-,7-6CobavHCSNn: No such file or directory 13:16:49 (encfs.cpp:138) getattr error: No such file or directory 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:16:49 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:16:49 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:16:49 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:16:49 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:16:49 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:16:49 (FileNode.cpp:127) calling setIV on (null) 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/r1KIEqVkz-,7-6CobavHCSNn: No such file or directory 13:16:49 (CipherFileIO.cpp:105) in setIV, current IV = 0, new IV = 16720606331386655431, fileIV = 0 13:16:49 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/r1KIEqVkz-,7-6CobavHCSNn 13:16:49 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/r1KIEqVkz-,7-6CobavHCSNn 13:16:49 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/r1KIEqVkz-,7-6CobavHCSNn: No such file or directory 13:16:49 (encfs.cpp:138) getattr error: No such file or directory 13:19:31 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:19:31 (FileNode.cpp:127) calling setIV on (null) 13:19:31 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/ 13:19:31 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/ 13:19:31 (encfs.cpp:685) doing statfs of /home/sri/Copy/OfficeData 13:19:32 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:19:32 (FileNode.cpp:127) calling setIV on (null) 13:19:32 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/LuT8R,DlpRnNH9b,fjWiKHKc: No such file or directory 13:19:32 (CipherFileIO.cpp:105) in setIV, current IV = 0, new IV = 13735228085838055696, fileIV = 0 13:19:32 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/LuT8R,DlpRnNH9b,fjWiKHKc 13:19:32 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/LuT8R,DlpRnNH9b,fjWiKHKc 13:19:32 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/LuT8R,DlpRnNH9b,fjWiKHKc: No such file or directory 13:19:32 (encfs.cpp:138) getattr error: No such file or directory 13:19:32 (encfs.cpp:685) doing statfs of /home/sri/Copy/OfficeData 13:19:32 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:19:32 (FileNode.cpp:127) calling setIV on (null) 13:19:32 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/UWbT-M-UKk1JpvNfN5uvOhGn: No such file or directory 13:19:32 (CipherFileIO.cpp:105) in setIV, current IV = 0, new IV = 4188221457101129840, fileIV = 0 13:19:32 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/UWbT-M-UKk1JpvNfN5uvOhGn 13:19:32 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/UWbT-M-UKk1JpvNfN5uvOhGn 13:19:32 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/UWbT-M-UKk1JpvNfN5uvOhGn: No such file or directory 13:19:32 (encfs.cpp:138) getattr error: No such file or directory 13:19:32 (MACFileIO.cpp:75) fs block size = 1024, macBytes = 8, randBytes = 0 13:19:32 (FileNode.cpp:127) calling setIV on (null) 13:19:32 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/o94olxB3orqarqyFviHKZ,ZF: No such file or directory 13:19:32 (CipherFileIO.cpp:105) in setIV, current IV = 0, new IV = 16725694203599486310, fileIV = 0 13:19:32 (DirNode.cpp:770) created FileNode for /home/sri/Copy/OfficeData/o94olxB3orqarqyFviHKZ,ZF 13:19:32 (encfs.cpp:134) getattr /home/sri/Copy/OfficeData/o94olxB3orqarqyFviHKZ,ZF 13:19:32 (RawFileIO.cpp:191) getAttr error on /home/sri/Copy/OfficeData/o94olxB3orqarqyFviHKZ,ZF: No such file or directory 13:19:32 (encfs.cpp:138) getattr error: No such file or directory 13:19:32 (encfs.cpp:213) getdir on /home/sri/Copy/OfficeData/ 13:19:32 (BlockNameIO.cpp:185) padding, _bx, finalSize = 208, 16, -192 13:19:32 (DirNode.cpp:132) error decoding filename: eWJrLh2dRFAY-7Brbsc,mTqf 13:19:32 (DirNode.cpp:132) error decoding filename: .encfs6.xml 13:19:32 (BlockNameIO.cpp:185) padding, _bx, finalSize = 218, 16, -202 13:19:32 (DirNode.cpp:132) error decoding filename: pvph9DkZ0BMPg2vN4UcfwuNU 13:24:10 (openssl.cpp:48) Allocating 41 locks for OpenSSL Please help me Thanks in advance.

Read the article

Error trapping for a missing data source in a Spring MVC / Spring JDBC web app [migrated]

- by Geeb

I have written a web app that uses Spring MVC libraries and Spring JDBC to connect to an Oracle DB. (I don't use any ORM type libraries as I create stored procedures on Oracle that do my stuff and I'm quite happy with that.) I use a connection pool to Oracle managed by the Tomcat container The app generally works absolutely fine by the way! BUT... I noticed the other day when I tried to set up the app on another Tomcat instance that I had forgotten to configure the connection pool and obviously the app could not get hold of an org.apache.commons.dbcp.BasicDataSource object, so it crashed. I define the pool params in the tomcat "context.conf" In my "web.xml" I have: <servlet> <servlet-name>appServlet</servlet-name> <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class> <init-param> <param-name>contextConfigLocation</param-name> <param-value>/WEB-INF/Spring/appServlet/servlet-context.xml</param-value> </init-param> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>appServlet</servlet-name>  <url-pattern>/</url-pattern> </servlet-mapping> <resource-ref> <description>Oracle Datasource example</description> <res-ref-name>jdbc/ora1</res-ref-name> <res-type>org.apache.commons.dbcp.BasicDataSource</res-type> <res-auth>Container</res-auth> </resource-ref> And I have a Spring "servlet-context.xml" where JNDI is used to map the data source object provided by the connection pool to a Spring bean with the ID of "dataSource": <jee:jndi-lookup id="dataSource" jndi-name="java:comp/env/jdbc/ora1" resource-ref="true" /> Here's the question: Where do I trap the case where the database cannot be accessed for whatever reason? I don't want the user to see a yard-and-a-half of Java stack trace in their browser, rather a nicer message that tells them there is a database problem etc. It seems that my app tries to configure the "dataSource" bean (in "servlet-context.xml") before any code has tested it can actually provide a dataSource object from the pool?! Maybe I'm not fully understanding exactly what is going on in these stages of the app firing up ... Thanks for any advice!

Read the article

SQLAuthority News – New Book Released – SQL Server Interview Questions And Answers

- by pinaldave

Two days ago, on birthday of my blog – I asked simple question – Guess! What is in this box? I have received lots of interesting comments on the blog about what is in it. Many of you got it absolutely incorrect and many got it close to the right answer but no one got it 100% correct. Well, no issue at all, I am going to give away the price to whoever has the closest answer first in personal email. Here is the answer to the question about what is in the box? Here it is – the box has my new book. In fact, I should say our new book as I co-authored this book with my very good friend Vinod Kumar. We had real blast writing this book together and had lots of interesting conversation when we were writing this book. This book has one simple goal – “master the basics.” This book is not only for people who are preparing for interview. This book is for every one who wants to revisit the basics and wants to prepare themselves to the technology. One always needs to have practical knowledge to do their duty efficiently. This book talks about more than basics. There are multiple ways to present learning – either we can create simple book or make it interesting. We have decided the learning should be interactive and have opted for Interview Questions and Answer format. Here is quick interview which we have done together. Details of the books are here The core concept of this book will continue to evolve over time. I am sure many of you will come along with us on this journey and submit your suggestions to us to make this book a key reference for anybody who wants to start with SQL server. Today we want to acknowledge the fact that you will help us keep this book alive forever with the latest updates. We want to thank everyone who participates in this journey with us. You can get the books from [Amazon] | [Flipkart]. Read Vinod‘s blog post. Do not forget to wish him happy birthday as today is his birthday and also book release day – two reason to wish him congratulations. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Best Practices, Data Warehousing, Database, Pinal Dave, PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Book Review, SQLAuthority News, SQLServer, T SQL, Technology

Read the article

SQL – Contest to Get The Date – Win USD 50 Amazon Gift Cards and Cool Gift

- by Pinal Dave

If you are a regular reader of this blog – you will find no issue at all in resolving this puzzle. This contest is based on my experience with NuoDB. If you are not familiar with NuoDB, here are few pointers for you. Step by Step Guide to Download and Install NuoDB – Getting Started with NuoDB Quick Start with Admin Sections of NuoDB – Manage NuoDB Database Quick Start with Explorer Sections of NuoDB – Query NuoDB Database In today’s contest you have to answer following questions: Q 1: Precision of NOW() What is the precision of the NuoDB’s NOW() function, which returns current date time? Hint: Run following script on NuoDB Console Explorer section: SELECT NOW() AS CurrentTime FROM dual; Here is the image. I have masked the area where the time precision is displayed. Q 2: Executing Date and Time Script When I execute following script - SELECT 'today' AS Today, 'tomorrow' AS Tomorrow, 'yesterday' AS Yesterday FROM dual; I will get the following result: NOW – What will be the answer when we execute following script? and WHY? SELECT CAST('today' AS DATE) AS Today, CAST('tomorrow' AS DATE) AS Tomorrow, CAST('yesterday'AS DATE) AS Yesterday FROM dual; HINT: Install NuoDB (it takes 90 seconds). Prizes: 2 Amazon Gifts 2 Limited Edition Hoodies (US resident only) Rules: Please leave an answer in the comments section below. You must answer both the questions together in a single comment. US resident who wants to qualify to win NuoDB apparel please mention your country in the comment. You can resubmit your answer multiple times, the latest entry will be considered valid. Last day to participate in the puzzle is June 24, 2013. All valid answer will be kept hidden till June 24, 2013. The winner will be announced on June 25, 2013. Two Winners will get USD 25 worth Amazon Gift Card. (Total Value = 25 x 2 = 50 USD) The winner will be selected using a random algorithm from all the valid answers. Anybody with a valid email address can take part in the contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: NuoDB

Read the article

More Efficient Data Structure for Large Layered Tile Map

- by Stupac

It seems like the popular method is to break the map up into regions and load them as needed, my problem is that in my game there are many AI entities other than the player out performing actions in virtually all the regions of the map. Let's just say I have a 5000x5000 map, when I use a 2D array of byte's to render it my game uses around 17 MB of memory, as soon as I change that data structure to a my own defined MapCell class (which only contains a single field: byte terrain) my game's memory consumption rockets up to 400+ MB. I plan on adding layering, so an array of byte's won't cut it and I figure I'd need to add a List of some sort to the MapCell class to provide objects in the layers. I'm only rendering tiles that are on screen, but I need the rest of the map to be represented in memory since it is constantly used in Update. So my question is, how can I reduce the memory consumption of my map while still maintaining the above requirements? Thank you for your time! Here's a few snippets my C# code in XNA4: public static void LoadMapData() { // Test map generations int xSize = 5000; int ySize = 5000; MapCell[,] map = new MapCell[xSize,ySize]; //byte[,] map = new byte[xSize, ySize]; Terrain[] terrains = new Terrain[4]; terrains[0] = grass; terrains[1] = dirt; terrains[2] = rock; terrains[3] = water; Random random = new Random(); for(int x = 0; x < xSize; x++) { for(int y = 0; y < ySize; y++) { //map[x,y] = new MapCell(terrains[random.Next(4)]); map[x,y] = new MapCell((byte)random.Next(4)); //map[x, y] = (byte)random.Next(4); } } testMap = new TileMap(map, xSize, ySize); // End test map setup currentMap = testMap; } public class MapCell { //public TerrainType terrain; public byte terrain; public MapCell(byte itsTerrain) { terrain = itsTerrain; } // the type of terrain this cell is treated as /*public Terrain terrain { get; set; } public MapCell(Terrain itsTerrain) { terrain = itsTerrain; }*/ }

Read the article

Increase Availability for Data Center Virtual Environments

- by Antoinette O'Sullivan

With Oracle VM, you can increase availability and add flexibility for data center virtual environments. To get started, take training on Oracle VM Server for x86 and Oracle VM Server for SPARC as appropriate for your systems. You can take these live instructor-led courses from your own desk as a live-virtual event or travel to an education center for an in-class event. The Oracle VM Administration: Oracle VM Server for x86 course, in 3 days, teaches you about creating NFS and iSCI repositories, migration, cloning and exercising high availabillity. In-class events already on the schedule include: Location Date Delivery Language Zagreb, Croatia 11 November 2013 Croatian Prague, Czech Republic 21 October 2013 Czech Ballerup, Denmark 26 August 2013 English Bordeaux, France 18 September 2013 French Paris, France 9 October 2013 French Strasbourg, France 11 September 2013 French Hamburg, Germany 30 Septemeber 2013 German Munich, Germany 28 October 2013 German Budapest, Hungary 9 September 2013 Hungarian Riga, Latvia 30 September 2013 Latvian Oslo, Norway 16 September 2013 English Warsaw, Poland 28 October 2013 Polish Bucharest, Romania 14 October 2013 English Istanbul, Turkey 23 December 2013 Turkish Indonesia, Jakarta 19 August 2013 English Canberra, Australia 4 November 2013 English Melbourne, Australia 6 November 2013 English Sydney, Australia 25 November 2013 English San Francisco, CA, United States 16 September 2013 English Roseville, MN, United States 21 October 2013 English St Louis, MO, United States 11 November 2013 English Reston, VA, United States 31 July 2013 English Buenos Aires, Argentina 21 August 2013 Spanish The Oracle VM Server for SPARC: Installation and Configuration course, in 2 days, teaches you about configuring control and service domains, creating guest domains, using virtual disks and networks, and migration. In-class events already on the schedule include: Location Date Delivery Language Budapest, Hungary 12 September 2013 Hungarian Prague, Czech Republic 9 September 2013 Czech Colombes, France 7 October 2013 French Stuttgart, Germany 28 October 2013 German Madrid, Spain 5 September 2013 Spanish Istanbul, Turkey 30 September 2013 Turkish Petaling Jaya, Malaysia 15 August 2013 English Singapore 5 August 2013 English Cnaberra, Australia 12 August 2013 English Melbourne, Australia 30 October 2013 English Sydney, Australia 26 August 2013 English To register for a course or to learn more about Oracle's virtualization curriculum, go to http://education.oracle.com/virtualization.

Read the article

[EF + Oracle] Inserting Data (Sequences) (2/2)

- by JTorrecilla

Prologue In the previous chapter we have see how to create DB records with EF, now we are going to Some Questions about Oracle. ORACLE One characteristic from SQL Server that differs from Oracle is “Identity”. To all that has not worked with SQL Server, this property, that applies to Integer Columns, lets indicate that there is auto increment columns, by that way it will be filled automatically, without writing it on the insert statement. In EF with SQL Server, the properties whose match with Identity columns, will be filled after invoking SaveChanges method. In Oracle DB, there is no Identity Property, but there is something similar. Sequences Sequences are DB objects, that allow to create auto increment, but there are not related directly to a Table. The syntax is as follows: name, min value, max value and begin value. 1: CREATE SEQUENCE nombre_secuencia 2: INCREMENT BY numero_incremento 3: START WITH numero_por_el_que_empezara 4: MAXVALUE valor_maximo | NOMAXVALUE 5: MINVALUE valor_minimo | NOMINVALUE 6: CYCLE | NOCYCLE 7: ORDER | NOORDER 8: How to get sequence value? To obtain the next val from the sequence: 1: SELECT nb_secuencia.Nextval 2: From Dual Due to there is no direct way to indicate that a column is related to a sequence, there is several ways to imitate the behavior: Use a Trigger (DB), Use Stored Procedures or Functions(…) or my particularly option. EF model, only, imports Table Objects, Stored Procedures or Functions, but not sequences. By that, I decide to create my own extension Method to invoke Next Val from a sequence: 1: public static class EFSequence 2: { 3: public static int GetNextValue(this ObjectContext contexto, string SequenceName) 4: { 5: string Connection = ConfigurationManager.ConnectionStrings["JTorrecillaEntities2"].ConnectionString; 6: Connection=Connection.Substring(Connection.IndexOf(@"connection string=")+19); 7: Connection = Connection.Remove(Connection.Length - 1, 1); 8: using (IDbConnection con = new Oracle.DataAccess.Client.OracleConnection(Connection)) 9: { 10: using (IDbCommand cmd = con.CreateCommand()) 11: { 12: con.Open(); 13: cmd.CommandText = String.Format("Select {0}.nextval from DUAL", SequenceName); 14: return Convert.ToInt32(cmd.ExecuteScalar()); 15: } 16: } 17: 18: } 19: } This Object Context’s extension method are going to invoke a query with the Sequence indicated by parameter. It takes the connection strings from the App settings, removing the meta data, that was created by VS when generated the EF model. And then, returns the next value from the Sequence. The next value of a Sequence is unique, by that, when some concurrent users are going to create records in the DB using the sequence will not get duplicates. This is my own implementation, I know that it could be several ways to do and better ways. If I find any other way, I promise to post it. To use the example is needed to add a reference to the Oracle (ODP.NET) dll.

Read the article

Zabbix Proxy not collecting data

- by Jordan Eunson

I have a working Zabbix 1.8.2 server collecting data for our office and our colo facility. However the link between the colo and office is flaky. What I'm trying to do is setup a proxy on the colo side to have a 1 hour cache and relay the data to our primary server at the office. Our zabbix server is compiled from source and uses a mysql database I've followed the instructions found in the zabbix documentation to compile the proxy using a sqlite3 database. I add the proxy to zabbix under Administration-DM-Proxies. The zabbix server "sees" the proxy because the "last seen" field is always under 60s. However when I assign a colo host to the proxy I stop receiving data from it. The colo host's zabbix_agentd.log file says this: 29343:20100622:124847 Timeout while answering request 29343:20100622:124847 Getting list of active checks failed. Will retry after 60 seconds The zabbix_proxy.log says this. 2041:20100622:123131.760 Deleted 0 records from history [0.000994 seconds] 2028:20100622:124131.671 Error while receiving answer from server [ZBX_TCP_READ() failed I also am unable to receive any SNMP data which is more important to me than the zabbix agent data. Has anyone had this problem before? Zabbix Server OS: CentOS5.4 Zabbix Server Build: 1.8.2 from source Zabbix Proxy OS: CentOS5.4 Zabbix Proxy Build: 1.8.2 from source P.S. The SQLite database on the zabbix proxy never gets any data written to it, it is identical to when I created it from the blank schema in zabbix-1.8.2/create/schema. (Yes I've checked the permissions)

Read the article

Cacti not working for SNMP data sources

- by lorenzo-s

I installed packages cacti and snmpd on a Debian server. I'm able to display common graphs in Cacti (such as memory usage, load average, logged in users, etc) using the data templates listed as Unix. Now I want to replace these graphs with new ones using SNMP data sources, because I see there is also CPU usage and because it's not excluded I have to manage multiple hosts in the future. So, I installed snmpd on the machine and left the snmpd.conf as it is. In Cacti, I created three new data sources from SNMP templates for 127.0.0.1 host: ucd/net - CPU Usage - Nice ucd/net - CPU Usage - System ucd/net - CPU Usage - User Then I created a new graph from template ucd/net - CPU Usage, and select the three data sources in the Graph Item Fields section. Graph is now enabled and running, but empty. No data have been collected. Under Console - Devices my SNMP host is listed as up and running: System:Linux ip-xx-xx-xxx-xxx 3.2.0-23-virtual #36-Ubuntu SMP Tue Apr 10 22:29:03 UTC 2012 x86_64 Uptime: 929267 (0 days, 2 hours, 34 minutes) Hostname: ip-xx-xx-xxx-xxx Location: Sitting on the Dock of the Bay Contact: Me [email protected] In SNMP Options I left all as it is: SNMP Version: Version 1 SNMP Community: public SNMP Timeout: 500 ms Maximum OID's Per Get Request: 10 In Console - Utilities - Cacti Log I have multiple warning (two for each data source) every 5 minutes: 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] Host[2] DS[18] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.4.15.0' 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] Host[1] DS[9] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:45:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.11.52.0' 10/29/2012 01:40:01 PM - CMDPHP: Poller[0] Host[2] DS[19] WARNING: Result from SNMP not valid. Partial Result: U 10/29/2012 01:40:01 PM - CMDPHP: Poller[0] WARNING: SNMP Get Timeout for Host:'127.0.0.1', and OID:'.1.3.6.1.4.1.2021.4.6.0' [...] I have the feeling I'm missing something, but I cannot get it...

Read the article

Force database read to master if slave data is stale

- by Jeff Storey

I previously asked a specific question about this database replication for new user signup to which I got an answer, but I want to ask this in the more general sense. I have a database setup in which I am using a master/slave combination. I am using the slaves for load balancing (the data itself is partitioned/sharded across multiple databases, but each database has X slaves for load balancing). Let's say I write some data to the master. Now I do a subsequent read which hits a slave, but the slave has not yet caught up to the master. Is there a way (which can be done quickly since it will happen frequently) to determine if the data is stale in the slave so I can then route to the master? In my previous question, it was suggested to do simultaneous writes to the cache and the database. This solution seems practical, but there is still a chance that the data may have been removed from the cache but not yet updated in the slave. A possible solution is to ensure the cache is big enough (based on the typical application load) so the data will not be evicted within the time frame it takes to replicate the data. This seems like it may be feasible. Can anyone provide additional insight into this question? Thanks!

Read the article

How to deduplicate 40TB of data?

- by Michael Stauffer

I've inherited a research cluster with ~40TB of data across three filesystems. The data stretches back almost 15 years, and there are most likely a good amount of duplicates as researchers copy each others data for different reasons and then just hang on to the copies. I know about de-duping tools like fdupes and rmlint. I'm trying to find one that will work on such a large dataset. I don't care if it takes weeks (or maybe even months) to crawl all the data - I'll probably throttle it anyway to go easy on the filesystems. But I need to find a tool that's either somehow super efficient with RAM, or can store all the intermediary data it needs in files rather than RAM. I'm assuming that my RAM (64GB) will be exhausted if I crawl through all this data as one set. I'm experimenting with fdupes now on a 900GB tree. It's 25% of the way through and RAM usage has been slowly creeping up the whole time, now it's at 700MB. Or, is there a way to direct a process to use disk-mapped RAM so there's much more available and it doesn't use system RAM? I'm running CentOS 6.

Read the article

Zabbix Proxy not collecting data

- by syntaxcollector

Hi All I have a working Zabbix 1.8.2 server collecting data for our office and our colo facility. However the link between the colo and office is flaky. What I'm trying to do is setup a proxy on the colo side to have a 1 hour cache and relay the data to our primary server at the office. Our zabbix server is compiled from source and uses a mysql database I've followed the instructions found in the zabbix documentation to compile the proxy using a sqlite3 database. I add the proxy to zabbix under Administration-DM-Proxies. The zabbix server "sees" the proxy because the "last seen" field is always under 60s. However when I assign a colo host to the proxy I stop receiving data from it. The colo host's zabbix_agentd.log file says this: 29343:20100622:124847 Timeout while answering request 29343:20100622:124847 Getting list of active checks failed. Will retry after 60 seconds The zabbix_proxy.log says this. 2041:20100622:123131.760 Deleted 0 records from history [0.000994 seconds] 2028:20100622:124131.671 Error while receiving answer from server [ZBX_TCP_READ() failed I also am unable to receive any SNMP data which is more important to me than the zabbix agent data. Has anyone had this problem before? Zabbix Server OS: CentOS5.4 Zabbix Server Build: 1.8.2 from source Zabbix Proxy OS: CentOS5.4 Zabbix Proxy Build: 1.8.2 from source P.S. The SQLite database on the zabbix proxy never gets any data written to it, it is identical to when I created it from the blank schema in zabbix-1.8.2/create/schema. (Yes I've checked the permissions)

Read the article

Did chkdsk make it harder to restore files?

- by neyl

My friend asked me to try and fix his loaded Sansa Clip + which wasn't playing. After opening it in MSC mode I discovered that the Music directory was empty and total of all files was only a few MB. However Disk properties showed me that it was 7Gb full. I then ran Tools - Error Checking and Windows dutifully informed me that disk was corrupt and I should run again Allowing Windows to Fix Errors. I did that and it told me everything was fixed and that all files were placed in FOUND.000 Dir. FOUND.000 was about 7.5 GB with FILE0000-1546 . CHK. (I am aware of methods like ChkBack to scan and convert to mp3 etc BUT Original filenames and structure needed!) Now I started getting worried that I made things worse! I have plenty of experience with Data Recovery Programs - Recuva, Restore My Files etc. and I was anyhow planning to use them to scan the drive. But NOW after CHKDSK "fixed" the drive maybe it modified critical FAT information vital for data recovery. So I run these programs and 0!!!. No trace of files! I tried a ton of Recovery Programs with same results TILL EaseUS Data Recovery Wizard found all files and I purchased program for $55! My Question In your opinion - did running CHKDSK with automatic fixing of errors make matters worse (i.e. many data recovery progs. didn't find a trace and they would have done if not for chkdsk) or was the filesystem too corrupt anyhow for regular File Recovery Progs.? If I would be a Professional - would I be responsible for running CHKDSK - automatic Fixing. Do you know of a better Data Recovery Program than EaseUs Data Recovery wizard - According to my experience I haven't found better!? Thanks

Read the article

postfix error: open database /var/lib/mailman/data/aliases.db: No such file

- by Thufir

In trying to follow the Ubuntu guide for postfix and mailman, I do not understand these directions: This build of mailman runs as list. It must have permission to read /etc/aliases and read and write /var/lib/mailman/data/aliases. Do this with these commands: sudo chown root:list /var/lib/mailman/data/aliases sudo chown root:list /etc/aliases Save and run: sudo newaliases I'm getting this kind of error: root@dur:~# root@dur:~# root@dur:~# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) ehlo dur 250-dur.bounceme.net 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:~# root@dur:~# tail /var/log/mail.log Aug 28 01:16:43 dur postfix/master[19444]: terminating on signal 15 Aug 28 01:16:43 dur postfix/postfix-script[19558]: starting the Postfix mail system Aug 28 01:16:43 dur postfix/master[19559]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 01:16:45 dur postfix/postfix-script[19568]: stopping the Postfix mail system Aug 28 01:16:45 dur postfix/master[19559]: terminating on signal 15 Aug 28 01:16:45 dur postfix/postfix-script[19673]: starting the Postfix mail system Aug 28 01:16:45 dur postfix/master[19674]: daemon started -- version 2.9.1, configuration /etc/postfix Aug 28 01:17:22 dur postfix/smtpd[19709]: error: open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 01:17:22 dur postfix/smtpd[19709]: connect from localhost[127.0.0.1] Aug 28 01:18:37 dur postfix/smtpd[19709]: disconnect from localhost[127.0.0.1] root@dur:~# root@dur:~# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix default_transport = smtp home_mailbox = Maildir/ inet_interfaces = loopback-only mailbox_command = /usr/lib/dovecot/deliver -c /etc/dovecot/conf.d/01-mail-stack-delivery.conf -m "${EXTENSION}" mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = dur, dur.bounceme.net, localhost.bounceme.net, localhost myhostname = dur.bounceme.net mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 readme_directory = no recipient_delimiter = + relay_domains = lists.dur.bounceme.net relay_transport = relay relayhost = smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_unauth_pipelining, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/dovecot-auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/ssl/certs/ssl-mail.pem smtpd_tls_key_file = /etc/ssl/private/ssl-mail.key smtpd_tls_mandatory_ciphers = medium smtpd_tls_mandatory_protocols = SSLv3, TLSv1 smtpd_tls_received_header = yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport root@dur:~# root@dur:~# And am wondering what connection might be. I do see that I don't have the requisite files: root@dur:~# root@dur:~# ll /var/lib/mailman/data/aliases ls: cannot access /var/lib/mailman/data/aliases: No such file or directory root@dur:~# At what stage were those aliases created? How can I create them? Is that what's causing the error error: open database /var/lib/mailman/data/aliases.db: No such file or directory Aug 28 01:17:22 dur postfix/smtpd[19709]: connect from localhost[127.0.0.1]?

Read the article

T-SQL Improvements And Data Types in ms sql 2008

- by Aamir Hasan

Microsoft SQL Server 2008 is a new version released in the first half of 2008 introducing new properties and capabilities to SQL Server product family. All these new and enhanced capabilities can be defined as the classic words like secure, reliable, scalable and manageable. SQL Server 2008 is secure. It is reliable. SQL2008 is scalable and is more manageable when compared to previous releases. Now we will have a look at the features that are making MS SQL Server 2008 more secure, more reliable, more scalable, etc. in details.Microsoft SQL Server 2008 provides T-SQL enhancements that improve performance and reliability. Itzik discusses composable DML, the ability to declare and initialize variables in the same statement, compound assignment operators, and more reliable object dependency information. Table-Valued ParametersInserts into structures with 1-N cardinality problematicOne order -> N order line items"N" is variable and can be largeDon't want to force a new order for every 20 line itemsOne database round-trip / line item slows things downNo ARRAY data type in SQL ServerXML composition/decomposition used as an alternativeTable-valued parameters solve this problemTable-Valued ParametersSQL Server has table variablesDECLARE @t TABLE (id int);SQL Server 2008 adds strongly typed table variablesCREATE TYPE mytab AS TABLE (id int);DECLARE @t mytab;Parameters must use strongly typed table variables Table Variables are Input OnlyDeclare and initialize TABLE variable DECLARE @t mytab; INSERT @t VALUES (1), (2), (3); EXEC myproc @t;Procedure must declare variable READONLY CREATE PROCEDURE usetable ( @t mytab READONLY ...) AS INSERT INTO lineitems SELECT * FROM @t; UPDATE @t SET... -- no!T-SQL Syntax EnhancementsSingle statement declare and initialize DECLARE @iint = 4;Compound Assignment Operators SET @i += 1;Row constructors DECLARE @t TABLE (id int, name varchar(20)); INSERT INTO @t VALUES (1, 'Fred'), (2, 'Jim'), (3, 'Sue');Grouping SetsGrouping Sets allow multiple GROUP BY clauses in a single SQL statementMultiple, arbitrary, sets of subtotalsSingle read pass for performanceNested subtotals provide ever better performanceGrouping Sets are an ANSI-standardCOMPUTE BY is deprecatedGROUPING SETS, ROLLUP, CUBESQL Server 2008 - ANSI-syntax ROLLUP and CUBEPre-2008 non-ANSI syntax is deprecatedWITH ROLLUP produces n+1 different groupings of datawhere n is the number of columns in GROUP BYWITH CUBE produces 2^n different groupingswhere n is the number of columns in GROUP BYGROUPING SETS provide a "halfway measure"Just the number of different groupings you needGrouping Sets are visible in query planGROUPING_ID and GROUPINGGrouping Sets can produce non-homogeneous setsGrouping set includes NULL values for group membersNeed to distinguish by grouping and NULL valuesGROUPING (column expression) returns 0 or 1Is this a group based on column expr. or NULL value?GROUPING_ID (a,b,c) is a bitmaskGROUPING_ID bits are set based on column expressions a, b, and cMERGE StatementMultiple set operations in a single SQL statementUses multiple sets as inputMERGE target USING source ON ...Operations can be INSERT, UPDATE, DELETEOperations based onWHEN MATCHEDWHEN NOT MATCHED [BY TARGET] WHEN NOT MATCHED [BY SOURCE]More on MERGEMERGE statement can reference a $action columnUsed when MERGE used with OUTPUT clauseMultiple WHEN clauses possible For MATCHED and NOT MATCHED BY SOURCEOnly one WHEN clause for NOT MATCHED BY TARGETMERGE can be used with any table sourceA MERGE statement causes triggers to be fired onceRows affected includes total rows affected by all clausesMERGE PerformanceMERGE statement is transactionalNo explicit transaction requiredOne Pass Through TablesAt most a full outer joinMatching rows = when matchedLeft-outer join rows = when not matched by targetRight-outer join rows = when not matched by sourceMERGE and DeterminismUPDATE using a JOIN is non-deterministicIf more than one row in source matches ON clause, either/any row can be used for the UPDATEMERGE is deterministicIf more than one row in source matches ON clause, its an errorKeeping Track of DependenciesNew dependency views replace sp_dependsViews are kept in sync as changes occursys.dm_sql_referenced_entitiesLists all named entities that an object referencesExample: which objects does this stored procedure use?sys.dm_sql_referencing_entities

Read the article

Grouping data in LINQ with the help of group keyword

- by vik20000in

While working with any kind of advanced query grouping is a very important factor. Grouping helps in executing special function like sum, max average etc to be performed on certain groups of data inside the date result set. Grouping is done with the help of the Group method. Below is an example of the basic group functionality. int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; var numberGroups = from num in numbers group num by num % 5 into numGroup select new { Remainder = numGroup.Key, Numbers = numGroup }; In the above example we have grouped the values based on the reminder left over when divided by 5. First we are grouping the values based on the reminder when divided by 5 into the numgroup variable. numGroup.Key gives the value of the key on which the grouping has been applied. And the numGroup itself contains all the records that are contained in that group. Below is another example to explain the same. string[] words = { "blueberry", "abacus", "banana", "apple", "cheese" }; var wordGroups = from num in words group num by num[0] into grp select new { FirstLetter = grp.Key, Words = grp }; In the above example we are grouping the value with the first character of the string (num[0]). Just like the order operator the group by clause also allows us to write our own logic for the Equal comparison (That means we can group Item by ignoring case also by writing out own implementation). For this we need to pass an object that implements the IEqualityComparer<string> interface. Below is an example. public class AnagramEqualityComparer : IEqualityComparer<string> { public bool Equals(string x, string y) { return getCanonicalString(x) == getCanonicalString(y); } public int GetHashCode(string obj) { return getCanonicalString(obj).GetHashCode(); } private string getCanonicalString(string word) { char[] wordChars = word.ToCharArray(); Array.Sort<char>(wordChars); return new string(wordChars); } } string[] anagrams = {"from ", " salt", " earn", " last ", " near "}; var orderGroups = anagrams.GroupBy(w => w.Trim(), new AnagramEqualityComparer()); Vikram

Read the article

Display particular data into a file

- by Avinash K G

I'm new to Ubuntu and have been using it for a couple of weeks now. Recently I encountered a problem where in I had to display a particular data on to a file. Here is the output displayed on the terminal. Potential vulnerability found (CVE-2009-4028) CVSS Score is 6.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2009-4030) CVSS Score is 4.4 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2009-5026) CVSS Score is 6.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0075) CVSS Score is 1.7 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0087) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0101) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0102) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0112) CVSS Score is 3.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0113) CVSS Score is 5.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0114) CVSS Score is 3.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0115) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0116) CVSS Score is 4.9 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0118) CVSS Score is 4.9 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0119) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0120) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0484) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0485) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0490) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0492) CVSS Score is 2.1 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0540) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0553) CVSS Score is 7.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0574) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2012-0583) CVSS Score is 4.0 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1492) CVSS Score is 7.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1506) CVSS Score is 2.8 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) Potential vulnerability found (CVE-2013-1521) CVSS Score is 6.5 Full vulnerability match (incl. edition/language) File "/usr/sbin/mysqld" (CPE = cpe:/a:mysql:mysql:5.1:::) on host glynis-desktop (key glynis-desktop) I intend to display the Potential vulnerability found field and the corresponding score alone. There seems to be about 9995 entries and I would like to display all of them. I have been using this command as of now awk '/CVSS Score is/ < /Potential vulnerability found/' output.txt but this seems to display only the name of the vulnerability or the score. How do I display this in file(text,excel) such that all the vulnerability and the corresponding score willbe displayed. Any help would be appreciated Thank you.

Read the article

Wipe, Delete, and Securely Destroy Your Hard Drive’s Data the Easy Way

- by The Geek

Giving a computer to somebody else? Maybe you’re putting it out on Craigslist to sell to a stranger—either way, you’ll want to make sure that your drive is completely wiped, scrubbed, and clean of any personal data. Here’s the easy way to do it. If you only have access to an Ubuntu Live CD or thumb drive, you can actually use that instead if you prefer, and we’ve got you covered with a full guide to securely wiping your PC’s hard drive. Otherwise, keep reading. Wipe the Drive with DBAN Darik’s Boot and Nuke CD is the easiest way to permanently and totally destroy every bit of personal information on that drive—nobody is going to recover a thing once this is done. The first thing you’ll need to do is download a copy of the ISO image, and then burn it to a blank CD with something really useful like Imgburn. Just choose Burn image to Disc at the start screen, select the little file icon, grab the downloaded ISO, and then go. If you need a little more help, we’ve got you covered with a beginner’s guide to burning an ISO image. Once you’re done, stick the disc into the drive, start the PC up, and then once you boot to the DBAN prompt you’ll see a menu. You can pretty much ignore everything on here, and just type… autonuke And there you are, your disk is now being securely wiped. Once it’s all done, you can remove the CD, and then either pack the PC up to sell, or re-install Windows on there if you feel like it. More Advanced Method If you’re really paranoid, want to run a different type of wipe, or just like fiddling with the options, you can choose F3 or hit Enter at the prompt to head to the advanced selection screen. Here you can choose exactly which drive to wipe, or hit the M key to change the method. You’ll be able to choose between a bunch of different wipe options. The Quick Erase is all you really need though. So there you are, easy PC wiping in one package. What about you? Do you make sure to wipe your old PCs before giving them away? Personally I’ve always just yanked out the hard drives before I got rid of an old PC, but that’s just me. Download DBAN from dban.org Similar Articles Productive Geek Tips Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveHow to Dispose of Old Computers ResponsiblyHow To Delete a VHD in Windows 7Speed up External USB Hard Drives in Windows VistaSpeed Up SATA Hard Drives in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites

Read the article

Code Structure / Level Design: Plants vs Zombies game level dissection

- by lalan

Hi Friends, I am interested in learning the class structure of Plants vs Zombies, particularly level design; for those who haven't played it - this video contains nice play-through: http://www.youtube.com/watch?v=89DfdOIJ4xw. How would I go ahead and design the code, mostly structure & classes, which allows for maximum flexibility & clean development? I am familiar with data driven design concepts, and would use events to handle most of dynamic behavior. Dissection at macro level: (Once every Level) Load tilemap, props, etc -- basically build the map (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) Show Enemies you'll face during present level (Once every Level) Unit Selection Window/Panel - selection of defensive plants (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) HUD Creation - based on unit selection (Level Loop) Enemy creation - based on types of zombies allowed (Level Loop) Sun/Resource generation (Level Loop) Show messages like 'huge wave of zombies coming', 'final wave' (Level Loop) Other unique events - Spawn gifts, money, tombstones, etc (Once every Level) Unlock new plant Potential game scripts: a) Level definitions: Level_1_1.xml, Level_1_2.xml, etc. Level_1_1.xml :: Sample script <map> <tilemap>tilemapFrontLawn</tilemap> <SpawnPoints> tiles where particular type of zombies (land vs water) may spawn</spawnPoints> <props> position, entity array -- lawnmower, </props> </map> <zombies> <... list of zombies who gonna attack by ids...> </zombies> <plants> <... list by plants which are available for defense by ids...> </plants> <progression> <ZombieWave name='first wave' spawnScript='zombieLightWave.lua' unlock='null'> <startMessages time=1.5>Ready</startMessages> <endMessages time=1.5>Huge wave of zombies incoming</endMessages> </ZombieWave> </progression> b) Entities definitions: .xmls containing zombies, plants, sun, lawnmower, coins, etc description. Potential classes: //LevelManager - Based on the level under play, it will load level script. Few of the // functions it may have: class LevelManager { public: bool load(string levelFileName); bool enter(); bool update(float deltatime); bool exit(); private: LevelData* mLevelData; } // LevelData - Contains the details of level loaded by LevelManager. class LevelData { private: string file; // array of camera,dialog,attackwaves, etc in active level LevelCutSceneCamera** mArrayCutSceneCamera; LevelCutSceneDialog** mArrayCutSceneDialog; LevelAttackWave** mArrayAttackWave; .... // which camera,dialog,attackwave is active in level uint mCursorCutSceneCamera; uint mCursorCutSceneDialog; uint mCursorAttackWave; public: // based on cursor, get the next camera,dialog,attackwave,etc in active level // return false/true based on failure/success bool nextCutSceneCamera(LevelCutSceneCamera**); bool nextCutSceneDialog(LevelCutSceneDialog**); } // LevelUnderPlay- LevelManager class LevelUnderPlay { private: LevelCutSceneCamera* mCutSceneCamera; LevelCutSceneDialog* mCutSceneDialog; LevelAttackWave* mAttackWave; Entities** mSelectedPlants; Entities** mAllowedZombies; bool isCutSceneCameraActive; public: bool enter(); bool update(float deltatime); bool exit(); } I am totally confused.. :( Does it make sense of using class composition (have flat class hierarchy) for managing levels. Is it a good idea to just add/remove/update sprites (or any drawable stuff) to current scene from LevelManager or LevelUnderPlay? If I want to make non-linear level design, how should I go ahead? Perhaps I would need a LevelProgression class, which would decide what to do based on decision tree. Any suggestions would be appreciated very much. Thank for your time, lalan

Read the article

Finding the maximum value/date across columns

- by AtulThakor

While working on some code recently I discovered a neat little trick to find the maximum value across several columns….. So the starting point was finding the maximum date across several related tables and storing the maximum value against an aggregated record. Here's the sample setup code: USE TEMPDB IF OBJECT_ID('CUSTOMER') IS NOT NULL BEGIN DROP TABLE CUSTOMER END IF OBJECT_ID('ADDRESS') IS NOT NULL BEGIN DROP TABLE ADDRESS END IF OBJECT_ID('ORDERS') IS NOT NULL BEGIN DROP TABLE ORDERS END SELECT 1 AS CUSTOMERID, 'FREDDY KRUEGER' AS NAME, GETDATE() - 10 AS DATEUPDATED INTO CUSTOMER SELECT 100000 AS ADDRESSID, 1 AS CUSTOMERID, '1428 ELM STREET' AS ADDRESS, GETDATE() -5 AS DATEUPDATED INTO ADDRESS SELECT 123456 AS ORDERID, 1 AS CUSTOMERID, GETDATE() + 1 AS DATEUPDATED INTO ORDERS .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now the code used a function to determine the maximum date, this performed poorly. After considering pivoting the data I opted for a case statement, this seemed reasonable until I discovered other areas which needed to determine the maximum date between 5 or more tables which didn't scale well. The final solution involved using the value clause within a sub query as followed. SELECT C.CUSTOMERID, A.ADDRESSID, (SELECT MAX(DT) FROM (Values(C.DATEUPDATED),(A.DATEUPDATED),(O.DATEUPDATED)) AS VALUE(DT)) FROM CUSTOMER C INNER JOIN ADDRESS A ON C.CUSTOMERID = A.CUSTOMERID INNER JOIN ORDERS O ON O.CUSTOMERID = C.CUSTOMERID .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } As you can see the solution scales well and can take advantage of many of the aggregate functions!

Read the article

export web page data to excel using javascript [on hold]

- by Sreevani sri

I have created web page using html.When i clicked on submit button it will export to excel. using javascript i wnt to export thadt data to excel. my html code is 1. Please give your Name:<input type="text" name="Name" /><br /> 2. Area where you reside:<input type="text" name="Res" /><br /> 3. Specify your age group<br /> (a)15-25<input type="text" name="age" /> (b)26-35<input type="text" name="age" /> (c)36-45<input type="text" name="age" /> (d) Above 46<input type="text" name="age" /><br /> 4. Specify your occupation<br /> (a) Student<input type="checkbox" name="occ" value="student" /> (b) Home maker<input type="checkbox" name="occ" value="home" /> (c) Employee<input type="checkbox" name="occ" value="emp" /> (d) Businesswoman <input type="checkbox" name="occ" value="buss" /> (e) Retired<input type="checkbox" name="occ" value="retired" /> (f) others (please specify)<input type="text" name="others" /><br /> 5. Specify the nature of your family<br /> (a) Joint family<input type="checkbox" name="family" value="jfamily" /> (b) Nuclear family<input type="checkbox" name="family" value="nfamily" /><br /> 6. Please give the Number of female members in your family and their average age approximately<br /> Members Age 1 2 3 4 5<br /> 8. Please give your highest level of education (a)SSC or below<input type="checkbox" name="edu" value="ssc" /> (b) Intermediate<input type="checkbox" name="edu" value="int" /> (c) Diploma <input type="checkbox" name="edu" value="dip" /> (d)UG degree <input type="checkbox" name="edu" value="deg" /> (e) PG <input type="checkbox" name="edu" value="pg" /> (g) Doctorial degree<input type="checkbox" name="edu" value="doc" /><br /> 9. Specify your monthly income approximately in RS <input type="text" name="income" /><br /> 10. Specify your time spent in making a purchase decision at the outlet<br /> (a)0-15 min <input type="checkbox" name="dis" value="0-15 min" /> (b)16-30 min <input type="checkbox" name="dis" value="16-30 min" /> (c) 30-45 min<input type="checkbox" name="dis" value="30-45 min" /> (d) 46-60 min<input type="checkbox" name="dis" value="46-60 min" /><br /> <input type="submit" onclick="exportToExcel()" value="Submit" /> </div> </form>

Read the article

Design Pattern for Complex Data Modeling

- by Aaron Hayman

I'm developing a program that has a SQL database as a backing store. As a very broad description, the program itself allows a user to generate records in any number of user-defined tables and make connections between them. As for specs: Any record generated must be able to be connected to any other record in any other user table (excluding itself...the record, not the table). These "connections" are directional, and the list of connections a record has is user ordered. Moreover, a record must "know" of connections made from it to others as well as connections made to it from others. The connections are kind of the point of this program, so there is a strong possibility that the number of connections made is very high, especially if the user is using the software as intended. A record's field can also include aggregate information from it's connections (like obtaining average, sum, etc) that must be updated on change from another record it's connected to. To conserve memory, only relevant information must be loaded at any one time (can't load the entire database in memory at load and go from there). I cannot assume the backing store is local. Right now it is, but eventually this program will include syncing to a remote db. Neither the user tables, connections or records are known at design time as they are user generated. I've spent a lot of time trying to figure out how to design the backing store and the object model to best fit these specs. In my first design attempt on this, I had one object managing all a table's records and connections. I attempted this first because it kept the memory footprint smaller (records and connections were simple dicts), but maintaining aggregate and link information between tables became....onerous (ie...a huge spaghettified mess). Tracing dependencies using this method almost became impossible. Instead, I've settled on a distributed graph model where each record and connection is 'aware' of what's around it by managing it own data and connections to other records. Doing this increases my memory footprint but also let me create a faulting system so connections/records aren't loaded into memory until they're needed. It's also much easier to code: trace dependencies, eliminate cycling recursive updates, etc. My biggest problem is storing/loading the connections. I'm not happy with any of my current solutions/ideas so I wanted to ask and see if anybody else has any ideas of how this should be structured. Connections are fairly simple. They contain: fromRecordID, fromTableID, fromRecordOrder, toRecordID, toTableID, toRecordOrder. Here's what I've come up with so far: Store all the connections in one big table. If I do this, either I load all connections at once (one big db call) or make a call every time a user table is loaded. The big issue here: the size of the connections table has the potential to be huge, and I'm afraid it would slow things down. Store in separate tables all the outgoing connections for each user table. This is probably the worst idea I've had. Now my connections are 'spread out' over multiple tables (one for each user table), which means I have to make a separate DB called to each table (or make a huge join) just to find all the incoming connections for a particular user table. I've avoided making "one big ass table", but I'm not sure the cost is worth it. Store in separate tables all outgoing AND incoming connections for each user table (using a flag to distinguish between incoming vs outgoing). This is the idea I'm leaning towards, but it will essentially double the total DB storage for all the connections (as each connection will be stored in two tables). It also means I have to make sure connection information is kept in sync in both places. This is obviously not ideal but it does mean that when I load a user table, I only need to load one 'connection' table and have all the information I need. This also presents a separate problem, that of connection object creation. Since each user table has a list of all connections, there are two opportunities for a connection object to be made. However, connections objects (designed to facilitate communication between records) should only be created once. This means I'll have to devise a common caching/factory object to make sure only one connection object is made per connection. Does anybody have any ideas of a better way to do this? Once I've committed to a particular design pattern I'm pretty much stuck with it, so I want to make sure I've come up with the best one possible.

Read the article

Generically correcting data before save with Entity Framework

- by koevoeter

Been working with Entity Framework (.NET 4.0) for a week now for a data migration job and needed some code that generically corrects string values in the database. You probably also have seen things like empty strings instead of NULL or non-trimmed texts ("United States ") in "old" databases, and you don't want to apply a correcting function on every column you migrate. Here's how I've done this (extending the partial class of my ObjectContext):public partial class MyDatacontext{ partial void OnContextCreated() { SavingChanges += OnSavingChanges; } private void OnSavingChanges(object sender, EventArgs e) { foreach (var entity in GetPersistingEntities(sender)) { foreach (var propertyInfo in GetStringProperties(entity)) { var value = (string)propertyInfo.GetValue(entity, null); if (value == null) { continue; } if (value.Trim().Length == 0 && IsNullable(propertyInfo)) { propertyInfo.SetValue(entity, null, null); } else if (value != value.Trim()) { propertyInfo.SetValue(entity, value.Trim(), null); } } } } private IEnumerable<object> GetPersistingEntities(object sender) { return ((ObjectContext)sender).ObjectStateManager .GetObjectStateEntries(EntityState.Added | EntityState.Modified) .Select(e => e.Entity); } private IEnumerable<PropertyInfo> GetStringProperties(object entity) { return entity.GetType().GetProperties() .Where(pi => pi.PropertyType == typeof(string)); } private bool IsNullable(PropertyInfo propertyInfo) { return ((EdmScalarPropertyAttribute)propertyInfo .GetCustomAttributes(typeof(EdmScalarPropertyAttribute), false) .Single()).IsNullable; }} Obviously you can use similar code for other generic corrections.

Read the article

DrawIndexedPrimitives overdraws data in previous buffer if called in loop

- by Daniel Excinsky

I doubled the question from stackoverflow here, and will delete the opposite of a question that gave me the answer. I have the Draw method in one of my renderers, that loops through the dictionary and gets precollected and preinitialized buffers. When dictionary has only one element, everything is just fine. But with more elements what I get on the screen is only the data from the last buffer (I suppose, not sure) My Draw method: public void Draw(GameTime gameTime) { if (!_areStaticEffectsSet) { // blockEffect.Parameters["TextureAtlas"].SetValue(textureAtlas); blockEffect.Parameters["HorizonColor"].SetValue(World.HORIZONCOLOR); blockEffect.Parameters["NightColor"].SetValue(World.NIGHTCOLOR); blockEffect.Parameters["MorningTint"].SetValue(World.MORNINGTINT); blockEffect.Parameters["EveningTint"].SetValue(World.EVENINGTINT); blockEffect.Parameters["SunColor"].SetValue(World.SUNCOLOR); _areStaticEffectsSet = true; } blockEffect.Parameters["World"].SetValue(Matrix.Identity); blockEffect.Parameters["View"].SetValue(_player.CameraView); blockEffect.Parameters["Projection"].SetValue(_player.CameraProjection); blockEffect.Parameters["CameraPosition"].SetValue(_player.CameraPosition); blockEffect.Parameters["timeOfDay"].SetValue(_world.TimeOfDay); var viewFrustum = new BoundingFrustum(_player.CameraView * _player.CameraProjection); _graphicsDevice.BlendState = BlendState.Opaque; _graphicsDevice.DepthStencilState = DepthStencilState.Default; foreach (KeyValuePair<int, Texture2D> textureAtlas in textureAtlases) { blockEffect.Parameters["TextureAtlas"].SetValue(textureAtlas.Value); foreach (EffectPass pass in blockEffect.CurrentTechnique.Passes) { pass.Apply(); //TODO: ?????????? ??????????????? ?? ?????? ?? ??????? ??????? VertexBuffer ? IndexBuffer foreach (Chunk chunk in _world.Chunks.Values) { if (chunk == null || chunk.IsDisposed) { continue; } if (chunk.BoundingBox.Intersects(viewFrustum) && chunk.GetBlockIndexBuffer(textureAtlas.Key) != null) { lock (chunk) { if (chunk.GetBlockIndexBuffer(textureAtlas.Key).IndexCount > 0) { VertexBuffer vertexBuffer = chunk.GetBlockVertexBuffer(textureAtlas.Key); IndexBuffer indexBuffer = chunk.GetBlockIndexBuffer(textureAtlas.Key); //if (chunk.DrawIndex == new Vector3i(0, 0, 0)) //{ //if (textureAtlas.Key == -1) //{ //var varray = new [] //{ //new VertexPositionTextureLight(new Vector3(0,68,0), new Vector2(0,1),1,new Vector3(0,0,0), new Vector3(1,1,1)), //new VertexPositionTextureLight(new Vector3(0,68,1), new Vector2(0,1),1,new Vector3(0,0,0), new Vector3(1,1,1)), //new VertexPositionTextureLight(new Vector3(1,68,0), new Vector2(0,1),1,new Vector3(0,0,0), new Vector3(1,1,1)) //}; //var iarray = new short[] {0, 1, 2}; //vertexBuffer = new VertexBuffer(_graphicsDevice, typeof(VertexPositionTextureLight), varray.Length, BufferUsage.WriteOnly); //indexBuffer = new IndexBuffer(_graphicsDevice, IndexElementSize.SixteenBits, iarray.Length, BufferUsage.WriteOnly); //vertexBuffer.SetData(varray); //indexBuffer.SetData(iarray); } } _graphicsDevice.SetVertexBuffer(vertexBuffer); _graphicsDevice.Indices = indexBuffer; _graphicsDevice.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, vertexBuffer.VertexCount, 0, indexBuffer.IndexCount / 3); } } } } } } } Noteworthy things about the code: XNA version is 4.0. I've commented the debugging code in the loop, but left it for it may bring some insight. I try not only to change vertices/indices in the loop, but textureAtlas also. Code in the shader about textureAtlas: Texture TextureAtlas; sampler TextureAtlasSampler = sampler_state { texture = <TextureAtlas>; magfilter = POINT; minfilter = POINT; mipfilter = POINT; AddressU = WRAP; AddressV = WRAP; }; struct VSInput { float4 Position : POSITION0; float2 TexCoords1 : TEXCOORD0; float SunLight : COLOR0; float3 LocalLight : COLOR1; float3 Normal : NORMAL0; }; VertexPositionTextureLight is my own realization of IVertexType. So, do anybody know about this problem, or see the wrongness in my code (that's far more likely)?

Search Results

Search found 60085 results on 2404 pages for 'data flow diagrams'.

Page 142/2404 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149 | Next Page >

- by user2175831

- by migrator

- by Geeb

- by pinaldave

- by Pinal Dave

- by Stupac

- by Antoinette O'Sullivan

- by JTorrecilla

- by Jordan Eunson

- by lorenzo-s

- by Jeff Storey

- by Michael Stauffer

- by syntaxcollector

- by neyl

- by Thufir

- by Aamir Hasan

- by vik20000in

- by Avinash K G

- by The Geek

- by lalan

- by AtulThakor

- by Sreevani sri

- by Aaron Hayman

- by koevoeter

- by Daniel Excinsky

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149 | Next Page >