Search Results

Search found 5109 results on 205 pages for 'specify'.

Page 142/205 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• Debian network bridge configuration - /etc/network/interfaces

  - by Mathias

  I'm running a Lenny Xen dom0 hosting multiple virtual machines in a routed IP setup. To get an additional private subnet, I created the bridge xenbr0 in the dom0 with the following commands: brctl addbr xenbr0 ifconfig xenbr0 10.0.0.1 netmask 255.255.255.0 ifconfig xenbr0 up This works as expected, and domU interfaces are added to the bridge by Xen on VM start. My only problem is: how the heck do i specify this configuration in /etc/network/interfaces that it remains permanent and the bridge is available after a reboot? I tried the following config as found on a lot of tutorials: auto xenbr0 iface xenbr0 inet static address 10.0.0.1 netmask 255.255.255.0 network 10.0.0.0 broadcast 10.0.0.255 bridge_stp no I get 2 different errors, depending on if the bridge already exists or not. If it doesn't exist: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). SIOCSIFADDR: No such device xenbr0: ERROR while getting interface flags: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device xenbr0: ERROR while getting interface flags: No such device xenbr0: ERROR while getting interface flags: No such device Failed to bring up xenbr0. done. And if it exists: root@dom0:~# brctl show bridge name bridge id STP enabled interfaces xenbr0 8000.000000000000 no root@dom0:~# /etc/init.d/networking restart Reconfiguring network interfaces...if-up.d/mountnfs[eth0]: waiting for interface xenbr0 before doing NFS mounts (warning). RTNETLINK answers: File exists Failed to bring up xenbr0. done. Could anyone point me in the right direction please? The bridge works fine when created manually, i just need the right config file entries. The most tutorials I found add some devices to the bridge in the config, is that maybe the problem why it is not working? I don't have any interfaces I want to add to the bridge on creation as they get added later on VM start... Thanks, Mathias

  Read the article

• Can't get simple Apache VHost up and running

  - by TK Kocheran

  Unfortunately, I can't seem to get a simple Apache VHost online. I used to simply have one VHost which bound to all: <VirtualHost *:80>, but this isn't appropriate for security anymore. I need to have one VHost for localhost requests (ie my dev server) and one for incoming requests via my domain name. Here's my new VHost: NameVirtualHost domain1.com <VirtualHost domain1.com:80> DocumentRoot /var/www ServerName domain1.com </VirtualHost> <VirtualHost domain2.com:80> DocumentRoot /var/www ServerName domain2.com </VirtualHost> After I restart my server, I see the following errors in my log: [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs [Wed Feb 16 11:26:36 2011] [error] [client ####.###.###.###] File does not exist: /htdocs What am I doing wrong? EDIT As per the answer give below, I have modified my configuration. Here are my configuration files: /etc/apache2/ports.conf: Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> Here are my actual defined sites: /etc/apache2/sites-enabled/000-localhost: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerAdmin ######### DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> RewriteEngine On RewriteLog "/var/log/apache2/mod_rewrite.log" RewriteLogLevel 9 <Location /> <Limit GET POST PUT> order allow,deny allow from all deny from 65.34.248.110 deny from 69.122.239.3 deny from 58.218.199.147 deny from 65.34.248.110 </Limit> </Location> </VirtualHost> /etc/apache2/sites-enabled/001-rfkrocktk.dyndns.org: NameVirtualHost rfkrocktk.dyndns.org:80 <VirtualHost rfkrocktk.dyndns.org:80> DocumentRoot /var/www ServerName rfkrocktk.dyndns.org </VirtualHost> And, just for kicks, my main file: /etc/apache2/apache2.conf: # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # Define an access log for VirtualHosts that don't define their own logfile CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ what else do I need to do to fix it? Should I be telling apache to listen on 127.0.0.1:80, or isn't it already listening there?

  Read the article

• "Windows cannot find" file when opening Excel spreadsheet

  - by DanH

  For all of my Excel spreadsheets when I attempt to open them (by double-clicking in explorer) I get the message "Windows cannot find C:...". The files are there, and are valid zip files as seen by 7-Zip. There are no apparent lock files in the directories. I did just install Norton-360 over the weekend (replacing Kasperski), but the Norton log shows no events related to Excel. However, while installing Norton I did reboot with some Excel files open. Presumably something is hosed in my Excel configuration but I don't know what. Update (Before actually posting) -- I found an article that suggested turning off Advanced Option "Ignore other applications that use DDE", then doing excel.exe /unregister followed by excel.exe /register. I tried this but I suspect that the two Excel calls were ignored (Excel opened, but no obvious change). With that option off the spreadsheets load OK, but not with it on. And, curiously, spreadsheets load OK with the option on or off if I open Excel first and then open the spreadsheet in it. Does anyone have any idea what effect leaving that option off will have? Update 2 -- I tried running the "repair" option. It said it corrected a couple of config things (without saying what they were), but I still get a failure if I double-click an Excel file with the "Ignore other applications..." option checked. Update 3 -- I managed to fix this problem, but failed at the time to come back and say what I did, and now I can't remember for sure. But I think it had something to do with "Options"/"Save" and some of the values there. Something to do with AutoRecover, perhaps. (Possibly there was a file in recovery and I had to specify "Disable AutoRecover for this workbook" to let bring-up get past it. Or perhaps the AutoRecover file location was hosed.) Anyway, if it happens to someone else, and you find the fix, post it below and I'll mark it answered.

  Read the article

• Windows Vista claims wireless key is the wrong length

  - by humble coffee

  A family member of mine is house sitting and has been given the details of their wifi. The access point is an Airport Express, it has WEP encryption (I think) and they've been given a passphrase to use. I know it's a passphrase and not the encrypted key as it's an English word. The passphrase is 10 characters long. The problem is that Vista complains that it's not a valid key as it must be a 5 or 13 character non-hex key or a 10 or 26 character hex key. (From what I've read this suggests the encryption is WEP?) I've found a couple of suggested solutions, but I'm not actually at the house at the moment so I wanted to make sure I have a good chance of getting it to work when I'm there but have no internets to ask. Solution 1: Vista needs to be told explicitly what kind of encryption and key is being used. Specify in the connection settings that you are using WEP and that it is a "shared key". Solution2: Try converting the passphrase to hexadecimal using an ASCII-hex converter and entering that.

  Read the article

• OpenLDAP Authentication UID vs CN issues

  - by user145457

  I'm having trouble authenticating services using uid for authentication, which I thought was the standard method for authentication on the user. So basically, my users are added in ldap like this: # jsmith, Users, example.com dn: uid=jsmith,ou=Users,dc=example,dc=com uidNumber: 10003 loginShell: /bin/bash sn: Smith mail: [email protected] homeDirectory: /home/jsmith displayName: John Smith givenName: John uid: jsmith gecos: John Smith gidNumber: 10000 cn: John Smith title: System Administrator But when I try to authenticate using typical webapps or services like this: jsmith password I get: ldapsearch -x -h ldap.example.com -D "cn=jsmith,ou=Users,dc=example,dc=com" -W -b "dc=example,dc=com" Enter LDAP Password: ldap_bind: Invalid credentials (49) But if I use: ldapsearch -x -h ldap.example.com -D "uid=jsmith,ou=Users,dc=example,dc=com" -W -b "dc=example,dc=com" It works. HOWEVER...most webapps and authentication methods seem to use another method. So on a webapp I'm using, unless I specify the user as: uid=smith,ou=users,dc=example,dc=com Nothing works. In the webapp I just need users to put: jsmith in the user field. Keep in mind my ldap is using the "new" cn=config method of storing settings. So if someone has an obvious ldif I'm missing please provide. Let me know if you need further info. This is openldap on ubuntu 12.04. Thanks, Dave

  Read the article

• Handle Sysinternals software does not accept -c parameter

  - by Alex

  I am trying to close a handle to a locked file in Windows, using Sysinternals Handle software (http://technet.microsoft.com/en-us/sysinternals/bb896655). First I search for opened handle: handle.exe "C:\Temp" It issues me the following: Far.exe pid: 1144 type: File 2E8: C:\Temp Far.exe pid: 1144 type: File 3A8: C:\Temp Next I run handle.exe with -c parameter. However, whichever number I enter, it does not do anything. I have tried both: 1144, 2E8, 3A8 and 1144 in hex (478) as the software help says it accepts PID in hexademic. Whatever I enter, it just issues the following: Handle v3.46 Copyright (C) 1997-2011 Mark Russinovich Sysinternals - www.sysinternals.com usage: handle [[-a [-l]] [-u] | [-c <handle> [-y]] | [-s]] [-p <process>|<pid>] [name] -a Dump all handle information. -l Just show pagefile-backed section handles. -c Closes the specified handle (interpreted as a hexadecimal number). You must specify the process by its PID. WARNING: Closing handles can cause application or system instability. -y Don't prompt for close handle confirmation. -s Print count of each type of handle open. -u Show the owning user name when searching for handles. -p Dump handles belonging to process (partial name accepted). name Search for handles to objects with <name> (fragment accepted). No arguments will dump all file references. What am I doing wrong?

  Read the article

• how to properly set environment variables

  - by avorum

  I've recently started using Windows (having used Ubuntu up until now) and I find myself unable to properly set environment variables. Whenever I set them they don't seem to work. I've been going to Start-Edit Environment Variables for your Account and editing the PATH value in the upper half of the GUI. Here's what I've got so far. ;C:\Chocolatey\bin;C:\tools\mysql\current\bin;C:\Program Files (x86)\Git\bin;C:\Program Files\MySQL\MySQL Server 5.6\bin\;C:\Python33\Scripts; These are each the parent directories of the executables I'd like to be able to run by name from CMD, but mysql, git, and pip aren't being recognized. Am I doing something wrong syntactically or at a general understanding level? I'd like to be able to run these commands without having to specify the full path to the executables every time. EDIT: The full PATH extracted from CMD PATH=C:\Python33\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\AMD APP\bin\x86_64;C:\Program Files (x86)\AMD APP\bin\x86;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\GTK2-Runtime\bin;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Java\jre7\bin;C:\Program Files (x86)\Windows Kits\8.1\Windows Performance Toolkit\;C:\Program Files (x86)\Microsoft SDKs\TypeScript\;C:\Program Files (x86)\MySQL\MySQL Utilities 1.3.4\; ;C:\Chocolatey\bin;C:\tools\mysql\current\bin I'm being forced to use Windows by my work environment, I don't enjoy the state of affairs.

  Read the article

• IIS7 - Web Deployment Tool - SetParam/SetParamFile to set http and https bindings + Cert

  - by Andras Zoltan

  Hi, we're currently using the MS Web Deployment Tool to sync a live website and some WebServices from a staging box to two live servers. The staging box hosts the site on any IP on port 17000, whereas the two live servers are load-balanced and have a different IP for each of them. At present, I generate two separate packages for deployment - one for each machine - using the sync operation and specifying a DestinationBinding parameter as follows: msdeploy -verb:sync -source:WebServer,computerName=localhost -dest:package="machinename.zip" -setParam:type="DestinationBinding",scope="SiteName",value="ip_address:port:". (Split across multiple lines to make it easier to read!) I run this twice, with a different target filename and ip address for each of the two machines. When it comes to deployment, I simply do a sync from each package to its respective live site. I know, I know - I should be able to do it by generating one parameterised package and then perhaps using the SetParamFile switch for each of the two Servers - believe me I'd like to, but the documentation on doing this is frankly non-existent. Now I need to configure and deploy both HTTP and HTTPS binding for this site; including also the ssl cert that is to be used. I've added an SSL binding for the site on the staging box - which uses a development cert (which will need to be replaced - or should the staging box be using the live cert?), and now the above command line has the effect of replacing the target IP on both http and https entries. It appears that I cannot specify multiple bindings plus the cert information in the DestinationBinding value in the -setParam above, so anyone know how would I go about doing this? Any help greatly appreciated.

  Read the article

• VSFTPD 530 Login incorrect

  - by sc.

  I'm trying to get a vsftpd server set up on CentOS 5.3 x64. I'm not able to get any local user login's to work. Here is my vsftpd.conf: local_enable=YES write_enable=YES pam_service_name=vsftpd connect_from_port_20=YES listen=YES pam_service_name=vsftpd xferlog_std_format=NO log_ftp_protocol=YES chroot_local_user=YES Here is the output of vsftp.log: Mon Sep 13 23:34:44 2010 [pid 19243] CONNECT: Client "10.0.1.138" Mon Sep 13 23:34:44 2010 [pid 19243] FTP response: Client "10.0.1.138", "220 (vsFTPd 2.0.5)" Mon Sep 13 23:34:44 2010 [pid 19243] FTP command: Client "10.0.1.138", "USER dwelch" Mon Sep 13 23:34:44 2010 [pid 19243] [dwelch] FTP response: Client "10.0.1.138", "331 Please specify the password." Mon Sep 13 23:34:44 2010 [pid 19243] [dwelch] FTP command: Client "10.0.1.138", "PASS <password>" Mon Sep 13 23:34:44 2010 [pid 19242] [dwelch] FAIL LOGIN: Client "10.0.1.138" Mon Sep 13 23:34:45 2010 [pid 19243] [dwelch] FTP response: Client "10.0.1.138", "530 Login incorrect." And the output of the secure log: Sep 13 17:40:50 intra vsftpd: pam_unix(vsftpd:auth): authentication failure; logname= uid=0 euid=0 tty=ftp ruser=dwelch rhost=10.0.1.138 user=dwelch It looks like pam is not authenticating the user. Here is my /etc/pam.d/vsftp file: #%PAM-1.0 session optional pam_keyinit.so force revoke auth required pam_listfile.so item=user sense=deny file=/etc/vsftpd/ftpusers onerr=succeed auth required pam_shells.so auth include system-auth account include system-auth session include system-auth session required pam_loginuid.so Can anyone see what I'm missing? Thanks.

  Read the article

• Windows XP laptop doesn't appear in WSUS All computers list

  - by George

  I have this one laptop that doesn't appear in WSUS all computers list. We have about 23-25 PCs/laptops/servers in the network, all, but one are listed in WSUS. This is what I have done so far: 1) Changing Updates on local PC: Go to your Windows XP client and start a new Microsoft Management Console (MMC). At Start, Run, type MMC. Use Ctrl+M to add a new snap-in. Click Add, and then add the Group Policy Object Editor for the Local Computer. Click Close, and then click OK. Expand the Local Computer Policy. Under Computer Configuration, go to Administrative Templates, Windows Components, Windows Update. In the right-hand pane, double-click Specify intranet Microsoft update service location. Configure the settings to reflect my WSUS server. Click OK and then close the MMC without saving it. executed wuauclt.exe /detectnow 2) Edited registry key to be pushed to the PCs using GPO [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] "WUServer"=http://wsusserver "TargetGroupEnabled"=dword:00000001 "TargetGroup"="WINXP" "WUStatusServer"=http://wsuswerver 3) executed wuauclt /resetauthorization /detectnow 4)Synchronised and refreshed the group I am running out of ideas here. The client is running Windows XP pro, WSUS version is 3.0 and is running on Windows 2008 R2 64-bit. Please, help! Thanks! EDIT 13.IX.2012 @ 15.40 I should have also mentioned that we do have a Windows Update GPO for workstations group and that laptop is a part of that group.

  Read the article

• Subdomains and address bar

  - by Priednis

  I have a fairly noob question about how subdomains work. As I understand at first the DNS server specifies that a request for certain subdomain.domain.com has to go to the IP address of domain.com, and the webserver at domain.com further processes the request and displays the needed subdomain page. It is not entirely clear to me how (for example Apache) server does it. As I understand there can be entries in vhosts.conf file which specify folders that contain the subdomain data. Something like: <VirtualHost *> ServerName www.domain.com DocumentRoot /home/httpd/htdocs/ </VirtualHost> <VirtualHost *> ServerName subdomain.domain.com DocumentRoot /home/httpd/htdocs/subdomain/ </VirtualHost> and there also can be redirect entries in .htaccess files like rewritecond %{http_host} ^subdomain.domain.com [nc] rewriterule ^(.*)$ http://www.domain.com/subdomain/ [r=301,nc] however in this case the user gets directed to the directory which contains the subdomain data but the user gets "out" of the subdomain. I would like to know - how, when going to subdomain.domain.com the subdomain.domain.com, beginning of address remains visible in the address bar of the explorer? Can it be done by an alternate entry in .htaccess file? If a VirtualHost entry is specified in the vhosts.conf file, does it mean, that a new user account has to be specified for access to this directory?

  Read the article

• ColdFusion 9 server not restaring - “Permission denied” errors

  - by Xevi Pujol

  I had to restart my ColdFusion 9 server on CentOS because of a memory performance issue, but now the server won't restart again. When looking at cfserver.log I can see how there's "Permission denied" errors all along. The ColdFusion application folder (/opt/coldfusion9/) is owned by nobody:root, as that fixed a similar problem that we had a few weeks ago. Also, the last time this CF server was running correctly, the JRE user that was being used was nobody. Maybe CF is trying to restart using another user (presumably apache) and that creates permission issues? However, I'm not sure how to check this hypothesis. Where's the config file that tells CF what JRE user to utilize? If I can change that, I could try to specify nobody there. Any other ideas also welcome. UPDATE: The runtime user that Coldfusion will utilise is defined in /etc/init.d/coldfusion_9. I fixed the problem by being consistent with the users: I needed to revert the ownership of the folder /opt/coldfusion9/ back to apache:root, which matches the init file.

  Read the article

• How are spam e-mails filtered ?

  - by kevindqc

  Hello. I'm just wondering how some e-mails get past the spam filter, and some don't? Everyday I get World of Warcraft phishing emails that get past the filter... For example, here's a phishing email (just the header) I got in my inbox, and not in my junk mail: X-Message-Delivery: Vj0xLjE7dXM9MDtsPTA7YT0wO0Q9MjtTQ0w9Ng== X-Message-Status: n:0 X-SID-PRA: [email protected] X-AUTH-Result: NONE X-Message-Info: M98loaK0Lo27IVRxloyPIZmAwUHKn18nx0o/idLdvGYjK48i19NuvFOnRFYGWE+HdIrNJpi1XaYx0gaAV13cgRnkWSzgHKG1 Received: from blizzard.com ([204.45.59.37]) by SNT0-MC3-F21.Snt0.hotmail.com with Microsoft SMTPSVC(6.0.3790.3959); Sat, 10 Apr 2010 06:38:24 -0700 Received: from hxeabjlh ([192.168.1.165]) (envelope-sender <[email protected]>) by 192.168.1.111 with ESMTP for <[email protected]>; Sat, 10 Apr 2010 08:43:24 -0500 Reply-To: <[email protected]> Sender: [email protected] Message-ID: <DE567AFB9E2F3DD985A2D9A8D12D2917@hxeabjlh> From: "[email protected]" <[email protected]> To: <[email protected]> Subject: World of Warcraft Account Password verification Date: Sat, 10 Apr 2010 21:38:10 +0800 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_04EE_0137659E.1AA23350" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.5512 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5512 Return-Path: [email protected] X-OriginalArrivalTime: 10 Apr 2010 13:38:24.0607 (UTC) FILETIME=[17F3A6F0:01CAD8B3] From what I understand, when you send an email with SMTP, you can specify any hostname in the "HELO" command. Here, the spammer specified "blizzard.com". And he sent his email through Hotmail using Outlook Express. I just don't understand how this gets past the spam filter? There's this SPF thing that seems to exist... but it doesn't seem to be used by blizzard? I'm on Windows, and if I use nslookup to look for the TXT records of blizzard.com and worldofwarcraft.com, I don't see a thing.... so blizzard is not using SPF? Why would that be?

  Read the article

• Multiple Set Peer for VPN Failover

  - by Kyle Brandt

  I will have two Cisco routers at Location A serving the same internal networks, and one router in location B. Currently, I have one router in each location with a IPSec site-to-site tunnel connecting them. It looks something like: Location A: crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location B set peer 12.12.12.12 set transform-set ESP-3DES-SHA match address internal-ips Location B: crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location A set peer 11.11.11.11 set transform-set ESP-3DES-SHA match address internal-ips Can I achieve fail over by simply adding another set peer at location B?: Location A (New secondary Router, configuration on previous router stays the same): crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location B set peer 12.12.12.12 set transform-set ESP-3DES-SHA match address internal-ips Location B (Configuration Changed): crypto map crypto-map-1 1 ipsec-isakmp description Tunnel to Location A set peer 11.11.11.11 ! 11.11.11.100 is the ip of the new second router at location A set peer 11.11.11.100 set transform-set ESP-3DES-SHA match address internal-ips Cisco Says: For crypto map entries created with the crypto map map-name seq-num ipsec-isakmp command, you can specify multiple peers by repeating this command. The peer that packets are actually sent to is determined by the last peer that the router heard from (received either traffic or a negotiation request from) for a given data flow. If the attempt fails with the first peer, Internet Key Exchange (IKE) tries the next peer on the crypto map list. But I don't fully understand that in the context of a failover scenerio (One of the routers as Location A blowing up).

  Read the article

• How do I configure custom URL handlers on OS X?

  - by cwd

  I've been reading a lot online about custom URL handlers / custom protocol handlers such as: Launching External Applications using Custom Protocols under OSX OS X URL handler to open links to local files I get that you can tell the system that a particular program is able to handle a certain scheme / protocol with the Info.plist file: <key>CFBundleURLTypes</key> <array> <dict> <key>CFBundleURLName</key> <string>Local File</string> <key>CFBundleURLSchemes</key> <array> <string>local</string> </array> </dict> </array> <key>NSUIElement</key> <true/> But if there are multiple applications that are capable of opening the same URL handler, such as mailto: how do you specify which one you want the system to use? There were some references to utilities like the More Internet preference pane which no longer seems to be available from the author's site. I did find it online by Googling but it seems a bit shaky - like it was written for an older OSX - perhaps Tiger. I haven't been able to find information on how to set the URL handler for protocols and custom protocols. I'm assuming there is a plist file somewhere that I can edit - or maybe there is a newer, better utility that works well with Mountain Lion?

  Read the article

• Problems mounting HPUX LVM+VXFS filesystem on Linux

  - by golimar

  I have a physical disk from a HPUX system that I need to access from a Debian Linux for ia64 system. From the hpux-lvm-tools project I have the tools to access the HPUX LVMs (Linux LVM has a different format) and I also have the freevxfs driver. I know beforehand that the disk has three partitions, and that the biggest one contains LVM volumes, and some of those are VxFS filesystems. I can see the partitions: # cat /proc/partitions major minor #blocks name 8 32 143374744 sdc 8 33 512000 sdc1 8 34 142452736 sdc2 8 35 409600 sdc3 It finds a VG in one of the disk partitions: # ./vgscan_hpux On /dev/sdc2 - vg1328874723 # ./pvdisplay_hpux /dev/sdc2 PV General Information ---------------------- VG Creation Time Fri Feb 10 12:52:03 2012 Physical Volume ID 1766760336 1328874723 Volume Group ID 1766760336 1328874723 Physical Volumes in VG 1766760336 1328874723 VG Actication Mode 0 - LOCAL PE Size 64 MBs Lvol sizes ---------- lvol1 - 8 Extents - 512 MBs lvol2 - 192 Extents - 12288 MBs lvol3 - 16 Extents - 1024 MBs ... lvol21 - 13 Extents - 832 MBs lvol22 - 224 Extents - 14336 MBs lvol23 - 16 Extents - 1024 MBs Then I activate that VG and some new devices appear in my system: # ./pvactivate_hpux /dev/sdc2 VG vg1328874723 Activated succesfully with 23 lvols. # # ll /dev/mapper/ total 0 crw------- 1 root root 10, 59 Nov 26 16:08 control lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol1 -> ../dm-0 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol10 -> ../dm-9 ... lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol8 -> ../dm-7 lrwxrwxrwx 1 root root 7 Nov 26 16:38 vg1328874723-lvol9 -> ../dm-8 But: # mount /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: you must specify the filesystem type # mount -t vxfs /dev/mapper/vg1328874723-lvol18 /mnt/tmp mount: wrong fs type, bad option, bad superblock on /dev/mapper/vg1328874723-lvol18, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so # lsmod |grep vxfs freevxfs 23905 0 I also tried to identify the raw data with the file command and it just says 'data': # file -s /dev/mapper/vg1328874723-lvol18 /dev/mapper/vg1328874723-lvol18: symbolic link to `../dm-17' # file -s /dev/dm-17 /dev/dm-17: data # Any clues?

  Read the article

• Is there a free XML viewer to do "pivot tables"

  - by FumbleFingers

  I have an *.xml file on a PC running Windows XP, with a structure something like... <movies id="my movies" <movie name="Unforgiven" <people star="Clint Eastwood" director="Clint Eastwood"/> </movie> <movie name="A Fistful of Dollars" <people star="Clint Eastwood" director="Sergio Leone"/> </movie> <movie name="J Edgar" <people star="Leonardo DiCaprio" director="Clint Eastwood"/> </movie> </movies> I want to open this file in a viewer utility which will show one line per movie, filtered by a condition such as director="Clint Eastwood", including the relevant value for movie name on each line. Note - that's just an example. My actual file has thousands of lines, each possibly several hundred bytes long, and there are many more levels and named values. The important thing is I want to apply a filter for a specified value of some field at some level. And I want to see one line for every case where that value occurs, showing the values for any fields I specify, even if they're stored at higher levels. I may be mistaken in saying what I want is a "pivot table" - I don't know what I should call it.

  Read the article

• AWS document on number of databases allowed on an Amazon RDS instance

  - by user35042

  At the Amazon RDS FAQ there is the question "What is a database instance (DB Instance)?". The entire answer (as of mid-June 2012) is: You can think of a DB Instance as a database environment in the cloud with the compute and storage resources you specify. You can create and delete DB Instances, define/refine infrastructure attributes of your DB Instance(s), and control access and security via the AWS Management Console, Amazon RDS APIs, and Command Line Tools. Multiple MySQL databases or SQL Server databases (up to 30) or Oracle database schemas can be created on a given DB Instance. The last part of that quote, "Multiple MySQL databases or SQL Server databases (up to 30) Oracle database schemas" I interpret to mean that you can have an "unlimited" number of databases on an RDS MySQL or Oracle instance but only 30 databases on an MS SQL Server instance ("unlimited" meaning not limited by the RDS infrastructure itself). This was asked in the Stackoverflow question Does Amazon RDS support multiple databases per instance?. The answer quoted an older version of the FAQ. What I am looking for is an Amazon document that clarifies this question, or else someone who has experience using Amazon RDS who can attest what the situation actually is.

  Read the article

• Choose identity from ssh-agent by file name

  - by leoluk

  Problem: I have some 20-30 ssh-agent identities. Most servers refuse authentication with Too many failed authentications, as SSH usually won't let me try 20 different keys to log in. At the moment, I am specifying the identity file for every host manually, using the IdentityFile and the IdentitiesOnly directive, so that SSH will only try one key file, which works. Unfortunately, this stops working as soon as the original keys aren't available anymore. ssh-add -l shows me the correct paths for every key file, and they match with the paths in .ssh/config, but it doesn't work. Apparently, SSH selects the indentity by public key signature and not by file name, which means that the original files have to be available so that SSH can extract the public key. There are two problems with this: it stops working as soon as I unplug the flash drive holding the keys it renders agent forwarding useless as the key files aren't available on the remote host Of course, I could extract the public keys from my identity files and store them on my computer, and on every remote computer I usually log into. This doesn't looks like a desirable solution, though. What I need is a possibility to select an identity from ssh-agent by file name, so that I can easily select the right key using .ssh/config or by passing -i /path/to/original/key, even on a remote host I SSH'd into. It would be even better if I could "nickname" the keys so that I don't even have to specify the full path.

  Read the article

• ntop to analyse bandwidth usage on multiple ASA 5505

  - by dunxd

  I have set up a netflow server at our data centre, which is connected via VPN to ~40 remote offices using Cisco ASA 5505. The aim is to analyse usage data and find out exactly how the remote connections are being used. I followed through http://techowto.files.wordpress.com/2008/09/ntop-guide.pdf to set up ntop and https://supportforums.cisco.com/docs/DOC-6114 to set up the ASAs. I can see from the Plugin Netflow Statistics page that netflow packets from my ASAs are being received - the counter is increasing. However, I am not seeing any breakdown on the Global Traffic Statistic page after switching to the Netflow interface. I'm just seeing a pie chart showing 100% traffic for eth0. The interfaces and documentation are a little hard to follow so I am not sure I have got things configured correctly. When setting up my NetFlow-device.2 I can specify Virtual NetFlow Interface Network Address - the web UI says This value is in the form of a network address and mask on the network where the actual NetFlow probe is located. is this a Network address (e.g. 192.168.0.0/24) or an actual host IP address (192.167.0.1/24)? If that should be a network address, is this the network in which one of my ASAs is or the network in which my ntop server is? If a host IP address, is this the IP address used by eth0 on my ntop server, the IP address of an ASA, or something else? Do I need a separate virtual interface for each ASA I am collecting netflow data from? Any guidance would be greatly welcome.

  Read the article

• check_snmp warning & critical thresholds with negative values

  - by Oesor

  I'm querying some signal level values measured in dBm, and the SNMP host on the remove device reports the values as negative values, ie, -90 dBm. However, check-snmp seems to be incapable of dealing with negative numbers as part of its threshold values. If I specify the values as part of a collection of OIDs, it accepts the syntax but converts the snmp value to positive, thus always generating a WARNING/CRITICAL result: root@ops-00:/usr/local/nagios/libexec# ./check_snmp -H 192.168.1.100 -o DEVICE-MIB::AverageReceiveSNR.0,DEVICE-MIB::CurrentNoiseFloor.0 -w 10:,~:-85 -c 15:,~:-80 -vvvv /usr/bin/snmpget -t 1 -r 5 -m ALL -v 1 [authpriv] 192.168.1.100:161 DEVICE-MIB::AverageReceiveSNR.0 DEVICE-MIB::CurrentNoiseFloor.0 DEVICE-MIB::AverageReceiveSNR.0 = INTEGER: 25 DEVICE-MIB::CurrentNoiseFloor.0 = INTEGER: -97 Processing line 1 oidname: DEVICE-MIB::AverageReceiveSNR.0 response: = INTEGER: 25 Processing line 2 oidname: DEVICE-MIB::CurrentNoiseFloor.0 response: = INTEGER: -97 SNMP CRITICAL - 25 *97* | DEVICE-MIB::AverageReceiveSNR.0=25 DEVICE-MIB::CurrentNoiseFloor.0=97 If I run it with a single OID, it gives me an error that the format is incorrect: root@ops-00:/usr/local/nagios/libexec# ./check_snmp -H 192.168.1.100 -o DEVICE-MIB::CurrentNoiseFloor.0 -w ~:-85 -c ~:-80 -vvvv Range format incorrect And if I run it with no thresholds defined, it works properly and returns the right value. This makes the graphs correct, however it'll never generate a notification when out of range: root@ops-00:/usr/local/nagios/libexec# ./check_snmp -H 192.168.1.100 -o DEVICE-MIB::CurrentNoiseFloor.0 -vvvv /usr/bin/snmpget -t 1 -r 5 -m ALL -v 1 [authpriv] 192.168.1.100:161 DEVICE-MIB::CurrentNoiseFloor.0 DEVICE-MIB::CurrentNoiseFloor.0 = INTEGER: -97 Processing line 1 oidname: DEVICE-MIB::CurrentNoiseFloor.0 response: = INTEGER: -97 SNMP OK - -97 | DEVICE-MIB::CurrentNoiseFloor.0=-97 What am I doing wrong here? How would I, for example, generate a CRITICAL when the noise floor is -80 dBm or higher, a WARNING when it's -85 to -80 dBm, and an OK when -85 dBm or lower? Do I have to write my own SNMP plugins when dealing with negative values?

  Read the article

• How to sync two computers using new MobileMe calendar

  - by CesarGon

  I have been using MobileMe for over a year with success. I use it to sync my Outlook calendars in my work and home computers, using Windows 7 and Outlook 2007. The main Outlook calendar folder in my work computer is replicated to MobileMe as "Work", and synced to my home computer, and the main calendar folder in my home computer is replicated to MobileMe as "Home", and synced to my work computer. This means that I can see both "Work" and "Home" calendars from both computers (as well as from the web interface through me.com), which is very convenient. Yesterday I migrated to the new MobileMe calendar, accepting the suggestion that popped up on the me.com website. After the migration, the MobileMe control panel on each of Windows computers asked me to re-configure my calendar setup, and everything fell apart. The "Home" and "Work" calendar folders in Outlook are now ignored by MobileMe, and new ones named "Home in MobileMe" and "Work in MobileMe" have been created, and placed in a separate Outlook data file rather than the default. This means that now: I now have four folders, two of which are not replicated to MobileMe The two folders that are not replicated reside on a separate data file, so alarms and reminders don't work; they're basically useless to me as calendar folders In addition, the button in the MobileMe Control Panel that used to let me specify what MobileMe folder should be synced against the default Outlook folder has gone. MobileMe is now too smart. Do you have any idea how to undo this mess and go back to a situation where I have two folders, as described in the top paragraph, which keep synced? I don't want an extra data file. Thanks.

  Read the article

• Why is OpenSSH not using the user specified in ssh_config?

  - by Jordan Evens

  I'm using OpenSSH from a Windows machine to connect to a Linux Mint 9 box. My Windows user name doesn't match the ssh target's user name, so I'm trying to specify the user to use for login using ssh_config. I know OpenSSH can see the ssh_config file since I'm specifying the identify file in it. The section specific to the host in ssh_config is: Host hostname HostName hostname IdentityFile ~/.ssh/id_dsa User username Compression yes If I do ssh username@hostname it works. Trying using ssh_config only gives: F:\>ssh -v hostname OpenSSH_5.6p1, OpenSSL 0.9.8o 01 Jun 2010 debug1: Connecting to hostname [XX.XX.XX.XX] port 22. debug1: Connection established. debug1: permanently_set_uid: 0/0 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa-cert type -1 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa type 2 debug1: identity file /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debia n-3ubuntu5 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu5 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname' is known and matches the RSA host key. debug1: Found key in /cygdrive/f/progs/OpenSSH/home/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_rsa debug1: Offering DSA public key: /cygdrive/f/progs/OpenSSH/home/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I was under the impression that (as outlined in this question: How to make ssh log in as the right user?) specifying User username in ssh_config should work. Why isn't OpenSSH using the username specified in ssh_config?

  Read the article

• Need help with custom init script

  - by churnd

  I'm trying to set up an init script for a process on redhat linux: #!/bin/sh # # Startup script for Conquest # # chkconfig: 345 85 15 - start or stop process definition within the boot process # description: Conquest DICOM Server # processname: conquest # pidfile: /var/run/conquest.pid # Source function library. This creates the operating environment for the process to be started . /etc/rc.d/init.d/functions CONQ_DIR=/usr/local/conquest case "$1" in start) echo -n "Starting Conquest DICOM server: " cd $CONQ_DIR && daemon --user mruser ./dgate -v - Starts only one process of a given name. echo touch /var/lock/subsys/conquest ;; stop) echo -n "Shutting down Conquest DICOM server: " killproc conquest echo rm -f /var/lock/subsys/conquest rm -f /var/run/conquest.pid - Only if process generates this file ;; status) status conquest ;; restart) $0 stop $0 start ;; reload) echo -n "Reloading process-name: " killproc conquest -HUP echo ;; *) echo "Usage: $0 {start|stop|restart|reload|status}" exit 1 esac exit 0 However, the cd $CONQ_DIR is getting ignored, because the script errors out: # ./conquest start Starting Conquest DICOM server: -bash: ./dgate: No such file or directory [FAILED] For some reason, I have to run dgate as ./dgate. I cannot specify the full path /usr/local/conquest/dgate The software came with an init script for a Debian system, so the script uses start-stop-daemon, with the option --chdir to where dgate is, but I haven't found a way to do this with the Redhat daemon function.

  Read the article

• ISC DHCPD IPv6 for multiple interfaces

  - by Seoman

  I want to assign multiple IPv6 to a server with multiple NIC. As IPv6 RFC defines, each server has a unique DUID that can have one of the 3 formats (LL, LLT or enterprise). And each NIC has an IAID. So a request from NIC1 its the DUID and the IAID of the NIC1 and the request from NIC2 its the same DUID but the IAID its different. The problem is that from a Centos box, when I ask for an IP in 2 different interfaces, I get the same IP. I can't find how to specify host entry based on DUID and the IAID. I see some people generating a unique DUID based on the MAC of the NIC but this is not IPv6 RFC says. What I tried is: host entry1 { host-identifier option dhcp6.client-id 00:01:00:01:19:fc:f8:1c:52:54:00:7e:c9:ec; option dhcp6.ia-na "00:09:40:5d"; fixed-address6 2001:db8:0:1::202; } host entry2 { host-identifier option dhcp6.client-id 00:01:00:01:19:fc:f8:1c:52:54:00:7e:c9:ec; option dhcp6.ia-na "00:7e:c9:ec"; fixed-address6 2001:db8:0:1::201; } This causes a Segmentation Fault in the client (what is scary...). I guess is not the right use for ia-na option but I don't see any other option.

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >