Search Results

Search found 6490 results on 260 pages for 'texnic center'.

Page 142/260 | < Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >

• VMware ESX 3.5 Host Health shown as unknown

  - by dunxd

  I have an ESX 3.5 update 5 cluster of five host servers, all fully patched as of this Friday. Today I noticed that one of the servers has the Hardware Health status as unknown in Virtual Center Infrastructure Client. When I look at the Health Status view under configuration for that host, all the items are status Unknown. The server is exactly the same configuration as the others - same model (HP DL360 G5), memory, NICs etc. I have tried restarting the management service with service mgmt-vmware restart but this has not resolved the issue. Asides from this, I am not seeing any issues with the cluster - however, I hate having a blind spot like this. Any ideas?

  Read the article

• Could I save printer's ink/toner by changing the font?

  - by Diogo

  I'm developing a Microsoft Word document that reached more than 200 pages and I want to print it using my Laserjet or my father's Inkjet printer. I can save paper using both sides of each sheet, however I can't save ink/toner using smaller fonts or un-bolding words (I already did it), so I started wondering about the fonts that I was using. For example, the most used fonts, Arial and Times New Roman have specific and relevant differences with regards to ink consumption: has uniform width across all the letters, and is more easily readable and "clean to see". has narrow width on center and an enlargement at the ends. Using Times New Roman will certainly save ink/toner but will also "pollute" the reader vision over time. So, there is some specific font (from more than 100 that I have on Windows) that could save ink and also keep a clean text?

  Read the article

• windows hosted networok on windows 8

  - by tanmaysingh

  my sister is using Acer laptop, that has an intel WLAN card and supports windows hosted network(checked in command prompt).Am using the basic way using netsh wlan command also, then am using netsh start wlan command.The hosted network gets created and it could b seen in "Network and Sharing Center" as the . I also went to Device manager, selected WLan card, made sure"allow this device to wake computer from sleep" is selected. Now I went to the newly created , clicked properties, and under sharing enabled allow this to be shared(but I am not able to select The name of the wifi my sis wants to share (in this case her college wifi name, LEts say QP4,Ethernet and Local Area connection are the only two option that are coming). Also the SSID name is not being shown in her mobile nor when I click the tower icon at the tray area,Any suggestions on what might be going wrong?She is using windows 8. Should I look for updated drivers? Her laptop is only 6 months old, i don't think the drivers are outdated. Any advice shall be appreciated.

  Read the article

• How do I hookup a dual video card Crossfire rig to a single monitor?

  - by Alexed

  I just received a new Alienware box preinstalled with two nice shiny ATI 6950 graphics cards. My goal is to use both of them to give me really good resolution and frame rate on my single monitor. There's zero documentation with the Alienware box and nothing I can find online. Do I just plug the monitor into one of the cards, and expect the two cards to do magic internally? The ATI Crossfire website indicates a need for an "external crossfirex connection cable". Do I need to buy one of these? If so, what kind of cable is it? The AMD Catalyst Control Center shows the second card as "Linked" but when I go to the AMD Overdrive section, the second card is at zero temperature, and clock, suggesting it's not actually doing anything. What do I need to do to make use of both cards? Is it something that doesn't kick in until I do something graphically intensive?

  Read the article

• IP issue with Heartbeat & DRBD

  - by adam0345

  I'm in the process of setting up 3-node stacked DRBD, and i'm experiencing a rather bizarre issue. Two nodes are located at the data center, and the 3rd node is located locally. The Primary and Secondary nodes are working as expected, however the 3rd node won't connect to the primary. If I ping the IP provided by heartbeat on the 3rd node it will return 100% packet loss, if I reset networking interfaces, ping will then return a few successful packets, but then stop returning any packets. I can't work out any reason why this would be behaving like this. All nodes are running Debian Squeeze, and the latest version of DRBD.

  Read the article

• Missing swf plugin in Google Chrome [Ubuntu]

  - by Bakhtiyor

  How to play .swf file in Google Chrome? Because when I open .swf files it says Missing Plug-in. though when I open chrome://plugins it shows that it has Shockwave Flash plugin installed already. My OS is Ubuntu 10 and would be happy if some linux geek could suggest me solution of my problem. Thanks and sorry for stupid question. Update 1 Here is information about version of the applications I use: Chrome 5.0.375.70 (48679) Ubuntu Shockwave Flash 9.0 r999 Update 2 I have solved the problem by the following way: Opened Application Manager Synaptic Deleted all the packages concerning flash and swf Opened up Application Center Ubuntu Searched for flash It found Adobe Flash Plugin Installed that application

  Read the article

• Windows Server Configuration Management Best Practices

  - by Anton Gogolev

  Chef/Pupper/Ansible are cool and all, but they are second-class citizens on Windows at best. We have a bunch of "snowflake" (one of a kind) machines (baremetal and virtual) that nobody really know what's going on with. What I want is to start establishing basic configuration management for said servers, starting from installing Windows, installing and enabling various Roles and Features, setting up Services, Shares, Users and deploying webapps. PowerShell DSC looks promising, but it's not yet here and appears to be over-engineered, Puppet and the like are again not first-class. There's a bunch of tooks and TLAs like Windows ADK, DISM, OCSetup, etc. and it seems to me that the "Configuration Management" story on Windows is not precisely rainbows and unicorns. What I want is a Puppet/Chef-like, lightweight tool (no System Center Configuration Management, please) which would allow us to "version-control our server infrastructure" and bring all the benefits of CM. So, where do I look for the tool that does this kind of thing?

  Read the article

• Key Repeat no longer works on Windows 7 Lenovo Windows 700 laptop

  - by Clyde

  The title pretty much sums up my problem. I can type fine, but holding down the key doesn't repeat, including the arrow keys which is super-annoying. "Filter Keys" in the Ease of access center is not turned on, so that's not the problem. Any ideas? UPDATE Also, the numeric keypad on the right is not working at all -- not just that it won't repeat, but there is no response at all to the numbers, the enter key, the numlk key. The purple Fn+NumLk which usually opens the calc program doesn't work. It's like it's totally disconnected.

  Read the article

• Access Denied Error in PagesListCPVEventReceiver post SharePoint SP2 upgrade

  - by Jeff

  I am seeing the following errors from one of the SharePoint Web Front Ends after the SP2 upgrade. Has anyone else seen this error or a solution? Event Type: Error Event Source: Windows SharePoint Services 3 Event Category: General Event ID: 6875 Date: 2009-10-27 Time: 13:09:57 User: N/A Computer: XXXXXXX Description: Error loading and running event receiver Microsoft.SharePoint.Publishing.PagesListCPVEventReceiver in Microsoft.SharePoint.Publishing, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c. Additional information is below. : Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Read the article

• rsync server side limit bandwidth/connection

  - by c2h2

  In a VOIP application, I have upto 3000 clients rsync audio files from there linux server in a daily, server is placed at a data center (10Mbps in/out bound), the server works as a VOIP sip server running FreeSWITCH (low ping latency should be ensured.) Therefore I would like to have server side control of rsync which controls: Limit total outbound bandwidth. Limit total number of connections. (Reject clients while at max number of connection and let it retry after a specific time frame.) OPTIONAL: list/kill individual connections. Normally I would use ssh + rsync + pem_keys with some extra options, but above requirements are not feasible by simple command lines. Can anyone point me some direction. or show some scripts/tools? I would also probably integrate them and release on github. Thanks!

  Read the article

• How to boot window from recovery partition?

  - by Zack

  Acer service center created recovery discs for my acer laptop. And they also created a partition in which contains the data from recovery discs. I can see that partition from disk management only. But how do I boot from it? Some months ago I have linux os installed. So when the laptop boot up I can see that partition. But not Now. How to boot from it? I can't see that drive when i press F12. F2 = enter BIOS setup F8 = Boot in safe mode F12 = choose the boot drive

  Read the article

• VPS hang when one Virtual CPU usage is 100%

  - by garconcn

  We are using Xen Center to manage all of our cPanel VPS servers. The hardware has two CPUs(Intel(R) Xeon(R) CPU [email protected]) and 32GB memory. Each hardware has 4 cPanel VPS and each VPS has 8GB memory and 4 Virtual CPUS. Every one or two months, one of the VPS server will hang because one Virtual CPU usage is 100% and it couldn't release the CPU unless we use force reboot. We have 10 similar hardware, and this cause our server down almost every day. We have tried to avoid the Statistics Processing and Fantastico update during the night, but the problem still happens randomly. I can not find anything in the server log when it hangs. Any clue? Thank you.

  Read the article

• Wireless is connected but no internet when PC Turns on

  - by mhesabi

  I have a PC that is connected to ADSL Modem router (linksys WAG54g2) directly via Ethernet cable And a laptop and also other devices such as another laptops and smarth phones. However when I turn On the PC or turn it off, some strange problem happens. My wireless network seems connected on laptop but there is no internet activity and can't open a webpage until I turn router off and on again manually. (other devices including the PC itself can't use the internet either) My router configured this way: Encapsulation: RFC 2516 PPPoE Multiplexing: LLC DHCP Server: Enabled and network sharing center IPv4 configuration is obtain IP address automatically How Can I fix this issue?

  Read the article

• Can't start firewall or automatic updates in Windows XP

  - by Chris Porter

  On a friends laptop following some viruses infestations there is a problem in starting the Windows firewall. The error is: Could not start the Windows Firewall/Internet Connection Sharing(ICS) service on Local Computer. Error 2: The system cannot find the file specified When attempting to turn on automatic updates in the security centre, the message is: We're sorry. The Security Center could not change your Automatic Updates settings. To try changing these settings yourself, go to System in Control Panel. On the Automtic Updates tab, select Automatic (recommended), and then click OK. All the options under "Automatic Updates" are greyed out. I've tried the suggestions below and many others: http://windowsxp.mvps.org/sharedaccess.htm http://support.Microsoft.com/kb/892199 http://windowsxp.mvps.org/repairwmi.htm I can't do a repair install because the installer doesn't detect existing versions. It's XP pro service pack 3.

  Read the article

• Updating to Exchange 2013 - any way to do it now?

  - by TomTom

  Exchange 2013 is out, available for some epople already. Got if from the VLC Center, now trying to get an upgrade path that works for some customers. Problem: There is no upgrade. It is "install on new Server, move mailboxes. This means coexistence with Exchagne 2010 for the time to move the Mailbox. Sadly the only compatible Exchange is Exchange 2010 Sp3 - which is not going to be bout for quite some time. Any way to still do an update? Backup, restore to new Server? Any beta of the SP that is good enough to ONLY move the mailboxes? I do not care about the rest - this really is "install Exchange 2013, move mailboxes, UNINSTALL 2010". I am quite - ah - unhappy that at the end the only one who will be able to intall 2013 are new companies right now.

  Read the article

• MediaPortal crash when scanning my TV Channels

  - by Martin Ongtangco

  I tried installing MediaPortal on my old system. I installed & tried both beta & stable releases: Here's the old system specs: Windows XP SP3 512MB DDR 80GB IDE K-World PVR-TV7131 Analog TV-Tuner Inno3d FX5500 128MB 64bit When scanning through the TV-Server, it crashes. I don't know if the incompatibility comes from the hardware or the OS, but my TV Tuner's own Media center app works well. For now, that's what im using. Anyone here familiar with MediaPortal? Thanks!

  Read the article

• Change Win7 taskbar position (overriding GPO, Registry Editor, Admin. Rights)

  - by diegocavazos53

  I run the computer center of my Faculty and the problem is that users manage to change the Win7 taskbar position. I don't really know how they do this as far as I have applied many group policies that are specific to the taskbar (like locking it). I have also disallowed users from entering new registry keys or executing the command prompt (or employing scripts). They have regular user rights and many Win7 tweaking programs need administrator rights to make changes to the GUI. So in other words, the taskbar is locked, there is a policy that sets its position to the lower part of the screen, users can't see the control panel, add registry keys, use the command prompt and don't have admin. rights. How do they keep moving the taskbar position to the upper part of the screen? Any ideas would be greatly appreciated. Thank you.

  Read the article

• Netcat UDP File Transfer Between Two Servers Times Out?

  - by Mark Bowytz

  I'm testing file transfer speeds between two Red Hat servers that are connected to the same switch within the data center and I decided to use netcat to eliminate protocol overhead as much as possible. Testing in TCP mode went well and I was wondering how UDP might fare. On my receiving (client) end, I ran this: nc -u -l 11225 -v > myfile.out And then on the sending (server) end I ran the following: cat myfile.out | nc -u myserver.foo.zzz.com 11225 -v The file I'm testing with is 38 GB but the transfer seems to stop at around 15 GB (one time at 14.9, another at 15.6). I've tested by adding a "-w 5000" just in case it's timing out but no joy. Adding the -v doesn't show anything except acknowledging that the connection occurred. No errors. So - any suggestions as to why would the transfer cease?

  Read the article

• No internet access on Windows 7 - part 2

  - by Vnuk

  This is a continuation of my previous question. The problems started when I turned on my wireless connection for the first time. Since then, every time I boot my Windows 7, my LAN connection does not have internet access. In my previous question, I got a key answer (route delete). Now my procedure to get LAN internet connectivity (local network works fine) when I boot looks like this: Power on WLAN Disconnect LAN cable Power off WLAN Execute route delete 0.0.0.0 if 11 Connect LAN cable Now my LAN connection has internet access. Another behavior that I can't explain - while my LAN connection has no internet access, Network and Sharing center refers to it as Unknown network, with a public icon. When I go through the fore mentioned procedure, it is referred to with my home WLAN network name, with status connected, and the Unknown network disappears.

  Read the article

• Suggestion of device WiFi range in it's spec. Possible?

  - by SeeR

  I have router Draytek Vigor 2100VG at home almost in the center of it. The farthest point at my home is my balcony, ~12m from it. I have constant wifi signal range problems with some of my devices, but not with others. Notebook Lenovo W510 - no problems Nokia Home Music - always on 10m - no problems Sony PS3 - always on 7m - no problems Sony tablet S - problems around 6m Sony PSP - problems around 8m Sony PS Vita - problems around 8m Nokia E63 - problems around 8m I'm curious why my Notebook don't have any problems even on the balcony? I guess it has better hardware or uses more power for transmission. This information is really important when you want to buy new device/computer, so my real question is: Can device wifi range can somehow be found/suggested from official hardware technical specification? If not Is there some web page with wifi range reviews?

  Read the article

• Service or software to auto-sync one server to another so they are identical?

  - by Ryan

  We have a main node in a DC data center and want to setup a back-up node in Seattle. The back-up node will only be used if the DC node goes down and we switch it over while DC node is repaired. The question is, what kind of services out there allow me to sync the data, I suppose we want to do it fairly frequently so if something goes down there isn't much loss in data between the time of failure and the last back-up/sync. Is there any common solution for this? It's Windows Server 2003 running Parallels Virtuozzo.

  Read the article

• Laptop changes resolution when the lid is closed/opened

  - by RedditGuy

  hi i've had a problem for the last couple of days where the resolution on my laptop changes when i close the lid i'm running windows xp professional sp2 on a dell inspiron 1501 the video chip is an ati radeon xpress 1150 according to the catalyst control center software i've got installed which i think came with the drivers or something i've seen this happen before but i installed an old game called road rash a couple days ago after seeing it mentioned on reddit and i'm wondering if it might be related anyone know how i can stop this from happening? i have a workaround where i can manually change the resolution to something else and then change it back but that's a lot of work to do every time i close the laptop which is a lot thanks!

  Read the article

• Server responses "bus error" to every command

  - by Temnovit

  I have a linux machine dedicated to MySQL server with a pretty high load. Today I woke up and was terrified to see, that database server is down. I could connect to it via SSH, but it was responding with bus error to each and every command. [root@r1304 home]# ls Bus error [root@r1304 home]# tail /var/log/messages Bus error [root@r1304 home]# reboot Bus error [root@r1304 home]# free -m Bus error [root@r1304 home]# chkdisk Bus error I went to Data Center and did a hard reset, which seemed to help, but after a half an hour situation reapeated and now I can't even connet via SSH anymore. Any ideas what this could be? how to diagnose such a problem and what are possible fixes? Server has 32 GB RAM, 2xSSD drives with software RAID UPDATE According to Zabbix, when MySQL died, number of processes stated to increase drammaticaly, until I did a hard reset. What could those be? Number of processes

  Read the article

• Drupal + GMap macro, map markers not displayed

  - by mingos

  Hi. I've run into a strange problem in the GMap module for Drupal. When I display a map inside a node using a GMap macro, everything is displayed correctly (according to what I specify in the macro or leave at default), save for map markers. I'm trying to specify a map marker, but it refuses to be displayed. My macro is the following: [gmap zoom=17 |center=53.77420697757659,20.474138259887695 |markers=big blue::53.77420697757659,20.474138259887695] I was unable to find any help on Drupal forums, both the official one and one local to my country. For completeness' sake, I do not wish to use a GMap view, just add a macro in a regular node. Hope you can help me find a solution. Thanks in advance for your replies...

  Read the article

• Migrating Gmail to Office 365

  - by user218699

  Good Morning, I have been setting up Office 365 for my organization. We are currently using Gmail. I have synced our local Active Directory server w/ Office 365, as well as our domains. The problem I am having has to do with migrating mailboxes from Gmail to Office 365. I have been using this article to walk me through the process: http://technet.microsoft.com/en-us/library/dn568114.aspx The issue arises when I begin to sync the mailboxes. Currently I have been trying to sync my own mailbox as a test. The synchronization process has been going on for about 15 hours (for just one mailbox) with no errors or any information given by Office 365, other than the "Syncing" status on the migration page in the Exchange Admin Center. Is syncing a single mailbox supposed to take this long, or have I missed a step? Thanks!

  Read the article

< Previous Page | 138 139 140 141 142 143 144 145 146 147 148 149  | Next Page >