Search Results

Search found 13968 results on 559 pages for 'device dependent routing'.

Page 143/559 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• No sound after video card replaced (AMD Radeon HD 7770)

  - by Sean

  Issue: no sound System: Dual boot Windows 7 (sda) Ubuntu 12.04 (sdb) 2 harddrives Dell XPS 730 Video card: AMD Radeo HD 7770 Diamond Multimedia Sound card: Creative Labs SB X-Fi Additional info: My sound used to work. Then, my old video card (NVIDIA geforce 280) died. I bought and installed a new video card: Radeon HD 7770. After this, my sound no longer worked in ubuntu (Win7 audio still works). Everything else in ubuntu, such as video, works fine. I suspect it has something to do with the fact that the Radeon card includes sound capability. Problem Details: If I click on System Settings - Sound, the panel freezes and stops responding indefinitely. The sound volume icon at the top of the screen (by the clock) shows 3 dashes beside it "---", and an empty drop-down box shows if I click on it. (Possibly related to 1.) When I reboot my machine, I get the message: "gnome settings daemon not responding". I have to force the reboot. I reinstalled ubunbu (perserving my home directory) and the problem persists. Diagnostics info: Following procedure outlined here: https://help.ubuntu.com/community/SoundTroubleshooting The following is a list of terminal commands, and their output: $ aplay -l List of PLAYBACK Hardware Devices There is no listing beyond that, and the command freezes until I hit control-c $ lspci -v | grep -A7 -i "audio" 00:0f.1 Audio device: NVIDIA Corporation MCP55 High Definition Audio (rev a2) Subsystem: Dell Device 0224 Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 Memory at dfff0000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device aab0 Subsystem: Diamond Multimedia Systems Device aab0 Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at dfefc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel -- 03:0a.0 Audio device: Creative Labs SB X-Fi Subsystem: Creative Labs Device 6002 Flags: bus master, medium devsel, latency 32, IRQ 18 Memory at dbff4000 (32-bit, non-prefetchable) [size=16K] Memory at dbc00000 (64-bit, non-prefetchable) [size=2M] Memory at d4000000 (64-bit, non-prefetchable) [size=64M] I/O ports at 8c00 [size=32] Capabilities: <access denied> Notice the Diamond Multimedia Systems Device - that seems to be my video card sound. My video card is Diamond multimedia. Also there's the weird NVIDIA device in there. That must either be a remnant of my now removed NVIDIA graphics card, or else some kind of on-board thing. Not sure which. $ killall pulseaudio This allows me to open system settings - sound. But the "Test Sound" button makes no sound And the output volume + mute controls are greyed / disabled at 0 volume. It also allows me to click on the sound control in the "task bar" (beside the clock), and a volume slider drops down, but it is disabled / greyed at 0 volume. $ find /lib/modules/uname -r | grep snd /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-88pm860x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic3x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8900.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8978.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320dac33.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9090.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sta32x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98088.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9850.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-rt5631.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8903.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8580.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8523.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max9877.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ads117x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8955.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8804.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-sgtl5000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8750.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm2000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic32x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4642.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad193x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8753.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4535.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8985.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8350.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-dfbmcs320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs42l51.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic26.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8737.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda1380.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8776.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8995.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tpa6130a2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8727.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm5100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8991.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8510.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-jz4740-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8400.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-lm4857.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8960.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-alc5623.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4270.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-tlv320aic23.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8993.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8961.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8940.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-uda134x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad1836.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8994.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8782.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cs4271.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8974.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8983.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8962.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4641.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm-hubs.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8971.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8996.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wl1273.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adav80x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-spdif.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-pcm3008.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-cx20442.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4671.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8711.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ad73311.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-max98095.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm9081.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8741.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm1250-ev1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8988.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-adau1373.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8731.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-l3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ssm2602.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-da7210.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-ak4104.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8904.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8728.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8770.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/codecs/snd-soc-wm8990.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/soc/snd-soc-core.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/emux/snd-emux-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/synth/snd-util-mem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hrtimer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-hwdep.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-pcm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-rawmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/oss/snd-mixer-oss.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-page-alloc.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-device.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-event.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/seq/snd-seq-midi-emul.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/core/snd-timer.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/pdaudiocf/snd-pdaudiocf.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pcmcia/vx/snd-vxpocket.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/6fire/snd-usb-6fire.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usbmidi-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/caiaq/snd-usb-caiaq.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-usx2y.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/usx2y/snd-usb-us122l.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/snd-usb-audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/usb/misc/snd-ua101.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl3/snd-opl3-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/opl4/snd-opl4-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-portman2x4.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-serial-u16550.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mts64.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-mtpav.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/mpu401/snd-mpu401-uart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/vx/snd-vx-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-dummy.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-aloop.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/pcsp/snd-pcsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/drivers/snd-virmidi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-firewire-speakers.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/firewire/snd-isight.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-tea6330t.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-tea575x-tuner.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4113.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-pt2258.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4117.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4xxx-adda.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/other/snd-ak4114.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-cs8427.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/i2c/snd-i2c.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/emu10k1/snd-emu10k1x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/korg1212/snd-korg1212.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8830.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8820.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/au88x0/snd-au8810.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/aw2/snd-aw2.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sis7019.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1371.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/vx222/snd-vx222.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1968.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs4281.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-sonicvibes.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-maestro3.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ac97/snd-ac97-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-es1938.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-fm801.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/nm256/snd-nm256.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-realtek.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cmedia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-conexant.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-intel.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-analog.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-hdmi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-idt.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0110.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-cirrus.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-via.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-ca0132.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec-si3054.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/hda/snd-hda-codec.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/riptide/snd-riptide.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ens1370.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als4000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-intel8x0m.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ca0106/snd-ca0106.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cs5530.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs5535audio/snd-cs5535audio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme32.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ymfpci/snd-ymfpci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ctxfi/snd-ctxfi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-azt3328.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/cs46xx/snd-cs46xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lx6464es/snd-lx6464es.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1712.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice17xx-ak4xxx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ice1712/snd-ice1724.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/mixart/snd-mixart.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/ali5451/snd-ali5451.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/lola/snd-lola.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-oxygen.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/oxygen/snd-virtuoso.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-via82xx-modem.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/pcxhr/snd-pcxhr.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigo.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-echo3g.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mona.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-layla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-mia.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoiox.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigoio.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodjx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-gina24.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-darla20.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/echoaudio/snd-indigodj.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-cmipci.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/asihpi/snd-asihpi.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-ad1889.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-rme9652.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdspm.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/rme9652/snd-hdsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/trident/snd-trident.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-atiixp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-als300.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-bt87x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/pci/snd-rme96.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-miro.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti93x.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/opti9xx/snd-opti92x-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusextreme.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusmax.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-interwave-stb.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gus-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/gus/snd-gusclassic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-emu8000-synth.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sbawe.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8-dsp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb-common.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb16-csp.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-sb8.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/sb/snd-jazz16.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-es18xx.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-azt2320.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-cmi8330.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-als100.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-classic.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-pinnacle.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/msnd/snd-msnd-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4231.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/cs423x/snd-cs4236.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/es1688/snd-es1688.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-adlib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1848/snd-ad1848.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/ad1816a/snd-ad1816a.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt1605.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/galaxy/snd-azt2316.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wavefront/snd-wavefront.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/wss/snd-wss-lib.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sc6000.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-sscape.ko /lib/modules/3.2.0-29-generic-pae/kernel/sound/isa/snd-opl3sa2.ko

  Read the article

• Oracle Retail Point-of-Service with Mobile Point-of-Service, Release 13.4.1

  - by Oracle Retail Documentation Team

  Oracle Retail Mobile Point-of-Service was previously released as a standalone product. Oracle Retail Mobile Point-of-Service is now a supported extension of Oracle Retail Point-of-Service, Release 13.4.1. Oracle Retail Mobile Point-of-Service provides support for using a mobile device to perform tasks such as scanning items, applying price adjustments, tendering, and looking up item information. Integration with Oracle Retail Store Inventory Management (SIM) If Oracle Retail Mobile Point-of-Service is implemented with Oracle Retail Store Inventory Management (SIM), the following Oracle Retail Store Inventory Management functionality is supported: Inventory lookup at the current store Inventory lookup at buddy stores Validation of serial numbers Technical Overview The Oracle Retail Mobile Point-of-Service server application runs in a domain on Oracle WebLogic. The server supports the mobile devices in the store. On each mobile device, the Mobile POS application is downloaded and then installed. Highlighted End User Documentation Updates and List of Documents  Oracle Retail Point-of-Service with Mobile Point-of-Service Release NotesA high-level overview is included about the release's functional, technical, and documentation enhancements. In addition, a section has been written that addresses Product Support considerations.   Oracle Retail Mobile Point-of-Service Java API ReferenceJava API documentation for Oracle Retail Mobile Point-of-Service is included as part of the Oracle Retail Mobile Point-of-Service Release 13.4.1 documentation set. Oracle Retail Point-of-Service with Mobile Point-of-Service Installation Guide - Volume 1, Oracle StackA new chapter is included with information on installing the Mobile Point-of-Service server and setting up the Mobile POS application. The installer screens for installing the server are included in a new appendix. Oracle Retail Point-of-Service with Mobile Point-of-Service User GuideA new chapter describes the functionality available on a mobile device and how to use Oracle Retail Mobile Point-of-Service on a mobile device. Oracle Retail POS Suite with Mobile Point-of-Service Configuration GuideThe Configuration Guide is updated to indicate which parameters are used for Oracle Retail Mobile Point-of-Service. Oracle Retail POS Suite with Mobile Point-of-Service Implementation Guide - Volume 5, Mobile Point-of-ServiceThis new Implementation Guide volume contains information for extending and customizing both the Mobile POS application for the mobile device and the Oracle Retail Mobile Point-of-Service server. Oracle Retail POS Suite with Mobile Point-of-Service Licensing InformationThe Licensing Information document is updated with the list of third-party open-source software used by Oracle Retail Mobile Point-of-Service. Oracle Retail POS Suite with Mobile Point-of-Service Security GuideThe Security Guide is updated with information on security for mobile devices. Oracle Retail Enhancements Summary (My Oracle Support Doc ID 1088183.1)This enterprise level document captures the major changes for all the products that are part of releases 13.2, 13.3, and 13.4. The functional, integration, and technical enhancements in the Release Notes for each product are listed in this document.

  Read the article

• Lenovo Thinkpad L430 overheating due to fan problems

  - by Dirk B.

  This is the same question as Fan not working on thinkpad L430, laptop overheating, but that question has been marked as a duplicate, which it is not, and I cannot reopen it. I'm having problems controlling the fan of my Lenovo Thinkpad L430. The fan doesn't start. Without any fan control installed the fan just doesn't run. If I run stress, it does run a little, but it's nowhere near the speed it should be. After a while, the laptop just overheats and stops. I Tried to install tp-fancontrol, and enabled thinkpad_acpi fancontrol=1, but to no avail. If I try to set the fan speed manually, it doesn't start up. In windows, there's a program called TPFanControl. It turns out that this laptop uses a different scheme to control the fan than other thinkpads. The level runs from 0 to 255, and max = 0 and min=255. Now I'm looking for a fan control program that works for linux. Does anyone know if it actually exists? Anyone with any experience on fan control on a L430? Update: sudo pwmconfig gives the following output: # pwmconfig revision 5857 (2010-08-22) This program will search your sensors for pulse width modulation (pwm) controls, and test each one to see if it controls a fan on your motherboard. Note that many motherboards do not have pwm circuitry installed, even if your sensor chip supports pwm. We will attempt to briefly stop each fan using the pwm controls. The program will attempt to restore each fan to full speed after testing. However, it is ** very important ** that you physically verify that the fans have been to full speed after the program has completed. Found the following devices: hwmon0 is acpitz hwmon1/device is coretemp hwmon2/device is thinkpad Found the following PWM controls: hwmon2/device/pwm1 hwmon2/device/pwm1 is currently setup for automatic speed control. In general, automatic mode is preferred over manual mode, as it is more efficient and it reacts faster. Are you sure that you want to setup this output for manual control? (n) y Giving the fans some time to reach full speed... Found the following fan sensors: hwmon2/device/fan1_input current speed: 0 ... skipping! There are no working fan sensors, all readings are 0. Make sure you have a 3-wire fan connected. You may also need to increase the fan divisors. See doc/fan-divisors for more information. update: If you need it, lspci is available here

  Read the article

• 2 Birds, 1 Stone: Enabling M2M and Mobility in Healthcare

  - by Eric Jensen

  Jim Connors has created a video showcase of a comprehensive healthcare solution, connecting a mobile application directly to an embedded patient monitoring system. In the demo, Jim illustrates how you can easily build solutions on top of the Java embedded platform, using Oracle products like Berkeley DB and Database Mobile Server. Jim is running Apache Tomcat on an embedded device, using Berkeley DB as the data store. BDB is transparently linked to an Oracle Database backend using  Database Mobile Server. Information protection is important in healthcare, so it is worth pointing out that these products offer strong data encryption, for storage as well as transit. In his video, Jim does a great job of demystifying M2M. What's compelling about this demo is that uses a solution architecture that enterprise developers are already comfortable and familiar with: a Java apps server with a database backend. The additional pieces used to embed this solution are Oracle Berkeley DB and Database Mobile Server. It functions transparently, from the perspective of Java apps developers. This means that organizations who understand Java apps (basically everyone) can use this technology to develop embedded M2M products. The potential uses for this technology in healthcare alone are immense; any device that measures and records some aspect of the patient could be linked, securely and directly, to the medical records database. Breathing, circulation, other vitals, sensory perception, blood tests, x-rats or CAT scans. The list goes on and on. In this demo case, it's a testament to the power of the Java embedded platform that they are able to easily interface the device, called a Pulse Oximeter, with the web application. If Jim had stopped there, it would've been a cool demo. But he didn't; he actually saved the most awesome part for the end! At 9:52 Jim drops a bombshell: He's also created an Android app, something a doctor would use to view patient health data from his mobile device. The mobile app is seamlessly integrated into the rest of the system, using the device agent from Oracle's Database Mobile Server. In doing so, Jim has really showcased the full power of this solution: the ability to build M2M solutions that integrate seamlessly with mobile applications. In closing, I want to point out that this is not a hypothetical demo using beta or even v1.0 products. Everything in Jim's demo is available today. What's more, every product shown is mature, and already in production at many customer sites, albeit not in the innovative combination Jim has come up with. If your customers are in the market for these type of solutions (and they almost certainly are) I encourage you to download the components and try it out yourself! All the Oracle products showcased in this video are available for evaluation download via Oracle Technology Network.

  Read the article

• How to repair an external harddrive?

  - by dodohjk

  I would like to reformat my hard disk, and if possible recover the (somewhat unimportant) contents if possible. I have a Western Digital 1TB hard drive which had a NTFS partition. I unplugged the drive without safely removing it first. At first a pop up was asking me to use a Windows OS to run the chkdsk /f command, however, in the effort to keep using a Linux OS I used the ntfsfix command on the ubuntu terminal Now, when I try to access the hard drive, it doesn't show up anymore in Nautilus. I tried reformatting it using Disk Utility, but it gives me an error message, and Gparted would hang on the "Scanning devices" step infinitely. Please comment any output that you would like to see and I will add it to my question. EDIT disk utility tells me is on /dev/sdb the command sudo fdisk -l gives dodohjk@DodosPC:~$ sudo fdisk -l [sudo] password for dodohjk: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0006fa8c Device Boot Start End Blocks Id System /dev/sda1 * 4094 482344959 241170433 5 Extended /dev/sda2 482344960 488396799 3025920 82 Linux swap / Solaris /dev/sda5 4096 31461127 15728516 83 Linux /dev/sda6 31463424 52434943 10485760 83 Linux /dev/sda7 52436992 62923320 5243164+ 83 Linux /dev/sda8 62924800 482344959 209710080 83 Linux Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes 255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6e697373 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/sdb1 ? 1936269394 3772285809 918008208 4f QNX4.x 3rd part /dev/sdb2 ? 1917848077 2462285169 272218546+ 73 Unknown /dev/sdb3 ? 1818575915 2362751050 272087568 2b Unknown /dev/sdb4 ? 2844524554 2844579527 27487 61 SpeedStor Partition table entries are not in disk order I wrote something wrong here, however here the output of fsck /dev/sbd is dodohjk@DodosPC:~$ sudo fsck /dev/sdb fsck from util-linux 2.20.1 e2fsck 1.42.5 (29-Jul-2012) ext2fs_open2: Bad magic number in super-block fsck.ext2: Superblock invalid, trying backup blocks... fsck.ext2: Bad magic number in super-block while trying to open /dev/sdb The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device&gt;

  Read the article

• Textures do not render on ATI graphics cards?

  - by Mathias Lykkegaard Lorenzen

  I'm rendering textured quads to an orthographic view in XNA through hardware instancing. On Nvidia graphics cards, this all works, tested on 3 machines. On ATI cards, it doesn't work at all, tested on 2 machines. How come? Culling perhaps? My orthographic view is set up like this: Matrix projection = Matrix.CreateOrthographicOffCenter(0, graphicsDevice.Viewport.Width, -graphicsDevice.Viewport.Height, 0, 0, 1); And my elements are rendered with the Z-coordinate 0. Edit: I just figured out something weird. If I do not call this spritebatch code above doing my textured quad rendering code, then it won't work on Nvidia cards either. Could that be due to culling information or something like that? Batch.Instance.SpriteBatch.Begin(SpriteSortMode.Immediate, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.Default, RasterizerState.CullNone); ... spriteBatch.End(); Edit 2: Here's the full code for my instancing call. public void DrawTextures() { Batch.Instance.SpriteBatch.Begin(SpriteSortMode.Texture, BlendState.AlphaBlend, SamplerState.LinearClamp, DepthStencilState.Default, RasterizerState.CullNone, textureEffect); while (texturesToDraw.Count > 0) { TextureJob texture = texturesToDraw.Dequeue(); spriteBatch.Draw(texture.Texture, texture.DestinationRectangle, texture.TintingColor); } spriteBatch.End(); #if !NOTEXTUREINSTANCING // no work to do if (positionInBufferTextured > 0) { device.BlendState = BlendState.Opaque; textureEffect.CurrentTechnique = textureEffect.Techniques["Technique1"]; textureEffect.Parameters["Texture"].SetValue(darkTexture); textureEffect.CurrentTechnique.Passes[0].Apply(); if ((textureInstanceBuffer == null) || (positionInBufferTextured > textureInstanceBuffer.VertexCount)) { if (textureInstanceBuffer != null) textureInstanceBuffer.Dispose(); textureInstanceBuffer = new DynamicVertexBuffer(device, texturedInstanceVertexDeclaration, positionInBufferTextured, BufferUsage.WriteOnly); } if (positionInBufferTextured > 0) { textureInstanceBuffer.SetData(texturedInstances, 0, positionInBufferTextured, SetDataOptions.Discard); } device.Indices = textureIndexBuffer; device.SetVertexBuffers(textureGeometryBuffer, new VertexBufferBinding(textureInstanceBuffer, 0, 1)); device.DrawInstancedPrimitives(PrimitiveType.TriangleStrip, 0, 0, textureGeometryBuffer.VertexCount, 0, 2, positionInBufferTextured); // now that we've drawn, it's ok to reset positionInBuffer back to zero, // and write over any vertices that may have been set previously. positionInBufferTextured = 0; } #endif }

  Read the article

• Ubuntu 12.04 LTS installation problem

  - by Zxy

  I am trying to install Ubuntu 12.04 LTS on my PC using WUBI. However, I keep getting this error: An error occured: *Error executing command >>command=C:\\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occured setting the element data. The request is not supported. >>stdout= For more information, please see the logfile:* Logfile: 06-11 10:57 DEBUG TaskList: ## Finished choose_disk_sizes 06-11 10:57 DEBUG TaskList: ## Running expand_diskimage... 06-11 10:59 DEBUG TaskList: ## Finished expand_diskimage 06-11 10:59 DEBUG TaskList: ## Running create_swap_diskimage... 06-11 10:59 DEBUG TaskList: ## Finished create_swap_diskimage 06-11 10:59 DEBUG TaskList: ## Running modify_bootloader... 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: ### Running modify_bcd... 06-11 10:59 DEBUG WindowsBackend: modify_bcd Drive(C: hd 51255.1171875 mb free ntfs) 06-11 10:59 ERROR TaskList: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 697, in modify_bcd File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= 06-11 10:59 DEBUG TaskList: # Cancelling tasklist 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 ERROR root: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 697, in modify_bcd File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Windows\System32\bcdedit.exe /set {2708afc0-9ffa-11e1-bc51-d167219ffa25} device partition=E: >>retval=1 >>stderr=An error has occurred setting the element data. The request is not supported. >>stdout= 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: New task modify_bcd 06-11 10:59 DEBUG TaskList: ## Finished modify_bootloader 06-11 10:59 DEBUG TaskList: # Finished tasklist*

  Read the article

• How to create wifihotspot in ubuntu 10.04 LTS

  - by aspdeepak

  I am using ubuntu 10.04 LTS in my lenovo laptop and have a android ICS device. I want to create a wifi-hotspot in ubuntu, which I can later use for connecting android device. I need this setup for capturing the packets from android device and later analysing them using wireshark in my ubuntu. I tried to create a new hotspot using "Create a new wireless Network" wizard from network manager applet, but for some reason the following happens. It breaks the existing internet connection(either the WLAN, or ethernet) Its not visible in the list of available WIFI hotspots in the android device. My Chipset information 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LF Gigabit Network Connection (rev 03) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 03:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) Supported interface modes: * IBSS * managed * monitor

  Read the article

• Win7 is not a tablet OS, no matter what the boys in Redmond think.

  - by John Conwell

  Despite what execs at Microsoft think, Windows 7 is NOT a tablet OS.  Just because you can install some software (or OS) on a device, doesn't mean that device is meant to run that software.  This seems to be the step that the non-engineer execs at Microsoft have seem to not understood.  In order to seamlessly work with a device, the software needs to be designed with that device in mind.  That has been the problem with the Windows PDA platform, the Windows Mobil platform, and now with trying to force fit Windows 7 on a tablet.  Its just not designed for that style of interaction.   Windows is designed to be interacted with via a mouse and keyboard.  In fact, it is brilliant at that.  But, It is NOT designed to be interacted with by your fingers.  And that is why the Windows tablet failed 10 years ago, and why it will fail today.  Its not the hardware's fault like Microsoft claimed 10 years ago.  Its the User Interaction design that failed. And this is why the iPhone and Android OS's work wonderfully on a tablet.  The user interaction was designed for small screens, navigated by big fat fingers.  I love these OS's and how I interact with them.  And when I play with a touch screen Windows 7 device, I am feel like I'm playing with a brittle wana-be.  And its not the hardware's fault.  The touchscreen is very responsive.  I actually like the hardware.  But the OS and the software are just not designed to be interacted with, with my big fat fingers.  In order to be successful, Microsoft needs to start from scratch, and build a platform AND SOFTWARE specifically for use by fingers.  Thats why everyone was so excited when they though Microsoft was going to release the Courier tablet.  Because it looked like a totally different platform.  Something that might actually work.  But Windows 7...I hate to burst your bubble, but you are not a touch platform.

  Read the article

• How do I set up nvidia graphics adapter to put out 1080p, it seems to be using interlace mode>

  - by keepitsimpleengineer

  After upgrading to 12.04, my mythbuntu client/server seems to be running in 1080i, the clue comes from: [ 1176.117] (II) NVIDIA(0): Setting mode "1920x1080_60i" [ 1231.340] (II) NVIDIA(0): Setting mode "DFP-1:1920x1080_60@1920x1080+0+0" This is from Xorg.0.log. This whole thing started from video tearing when watching Mythtv recordings. It didn't happen in 10.10. Should I use "TVStandard" "HD1080p" in the screen section since this is a dedicated HTPC? It only connects to an HDTV (1080p) via hdmi. Here is the current xorg.conf file: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Keyboard0" "CoreKeyboard" # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup # InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" FontPath "unix/:7100" EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/psaux" # Option "Emulate3Buttons" "no" # Option "ZAxisMapping" "4 5" #EndSection # commented out by update-manager, HAL is now used and auto-detects devices # Keyboard settings are now read from /etc/default/console-setup #Section "InputDevice" # # generated from default # Identifier "Keyboard0" # Driver "kbd" #EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "SAMSUNG" HorizSync 26.0 - 81.0 VertRefresh 24.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 240" Option "TripleBuffer" "1" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection After a little digging, the question changes slightly, to wit... Per Chapter 19 of nvidia README... "If the EDID for the display device reported a preferred mode timing, and that mode timing is considered a valid mode, then that mode is used as the "nvidia-auto-select" mode." The EDID for my HDMI connected LCD monitor says use first device as preferred. Prefer first detailed timing : Yes Also: (--) NVIDIA(0): EDID maximum pixel clock : 230.0 MHz The list: (from startx -- -verbose 6 ) (--) NVIDIA(0): Detailed Timings: (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 148.50 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1089, 1125 (--) NVIDIA(0): H/V Polarity : +/+ This is the actual mode selected: (from xorg.0.log) (--) NVIDIA(0): 1920 x 1080 @ 60 Hz (--) NVIDIA(0): Pixel Clock : 74.18 MHz (--) NVIDIA(0): HRes, HSyncStart : 1920, 2008 (--) NVIDIA(0): HSyncEnd, HTotal : 2052, 2200 (--) NVIDIA(0): VRes, VSyncStart : 1080, 1084 (--) NVIDIA(0): VSyncEnd, VTotal : 1094, 1124 (--) NVIDIA(0): H/V Polarity : +/+ (--) NVIDIA(0): Extra : Interlaced (--) NVIDIA(0): CEA Format : 5 So my HTPC is down-converting to 1080i and then the Monitor is up-converting to 1080p How can I fix this, please?

  Read the article

• Failed 12.04 installation

  - by Rob Sayer

  I tried installing Ubuntu 12.04 today. Not an upgrade, a new installation. It didn't work. My computer specs: Computer: Compaq presario CQ-104CA OS: Windows 7 Home 64 bit CPU: AMD V140 BIOS: latest Graphics: amd m880g with ati mobility radeon hd 4250 Wireless: atheros ar9285 Internal HD:SATA I wasn't connected to the internet at the time ... I know of a number of people who have installed ubuntu unconnected and just updated later. It seemed to go normally until I got to the part where I chose to install dual boot linux/windows. Then, the screen went black and the following test appeared (I left out the [OK]'s): checking battery state starting crash report submission daemon stating cpu interrupts balancing daemon stopping system V runlevel compatibility starting configure network device security stopping configure network device security stopping cold plug devices stopping log initial device creation starting enable remaining boot-time encrypting devices starting configure network device security starting save udev log and update rules stopping save udev log and update rules stopping enable remaining boot-time encrypted block devices checking for running unattended-upgrades acpid: exiting speech-dispatcher disabled: edit /etc/default/speech-disorder At this point, the CD is ejected. Then nothing. If I press the return key, it boots Windows. I don't think that's what's supposed to happen. Thinking the cd media or dvd drive may have been faulty, I downloaded the .iso again and made a bootable USB stick, as per your instructions. This time there was no cryptic crash screen. It just booted windows. I can't find any log files it may have left. Thinking the amd64 version may have been the wrong one, I tried downloading the x86 version. Same thing, both from cd and usb drive. Note I downloaded both files twice. I doubt it was a corrupted d/l. This is supposed to be a simple, transparent install. I went to the time and trouble of looking up my devices and drivers re ubuntu beforehand, and was prepared to do some configuration, though I know someone who has the same wireless device and his worked righted out of the box. But I spent over 3 hours trying to install it with only the above to show for it.

  Read the article

• RIM's current BB7 developer toolset is a joke

  - by mbrit

  tl;dr - RIM's current developer toolset is not fit for purpose.Background to this is that I'm currently working on a PhoneGap/Cordova project for a client that has to run on BlackBerry. The tooling is so ridiculous to use that even though I had a gentle dig at them in a Guardian piece it's worth having a more full-on attack.At the moment, RIM's pitch is that apps are built for the current BBOS7 devices using WebWorks. This is an HTML-based toolset. Essentially a browser is spun up in a native app container and your app is powered by JavaScript. Specific JavaScript libraries exist that thunk down to native capabilities no the device. I happen to use PhoneCap/Cordova in combination with this.The tooling is non-existent. I'm using TextMate, Ant, and Terminal to develop the app. There's no "console.log" output, and no debugging. The only way to instrument the app is to put "alert" calls in your code.Apart from the fact that that's *not* fine in 2012, how about this… every time you deploy a new app to the device, the device has to reboot. This process takes six minutes on a relatively modern BlackBerry device. How about this as well - in order to get a file into the package it has to be signed. My small app over here has 100 different files (75 or so generated). Signing doesn't happen locally, it happens on RIM's servers in Waterloo. Thus whenever you deploy the app you have this utility have to call RIM's servers 100 times. More to the point, sometimes during the day these servers have "micro-downtime" moments where they're unreachable for five or ten minutes, normally two or three times a day. Oh yes, you'll also get an email sent to you per signing on success or failure. 100 inbound emails, per deployment.(I started this post at the beginning of one of these cycles, by the way. That's how long it takes to build and deploy *once*. By the way, the change I made didn't work.)To clarify:* Change the script,* Build it using Ant,* Ant will spin up a Java app that talks to RIM's servers to sign it.* Receive 100 emails, assuming the server is up.* App deployed - takes about 30 seconds.* BlackBerry device restarts - takes about six minutes.* Find and open the app. Go through security prompts.* Test the app, with no "console.log" output and no debugger."Why not use the simulator?" I hear you ask. Well, apart from the fact that the simulator refused to reach any network service over HTTPS that I happen to own? (Some people suggest changing DNS settings for this known issue.) Admittedly, the simulator does show you console.log, but you still have the "six minute" restart issue on the simulator.Developers will understand this problem. Breaking concentration for six-plus minutes every time you want to deploy an app turns developing into a nightmare. Combining that with no worthy debugging tools turns the toolset into a joke.

  Read the article

• HDMI sound gone, can't figure out how to turn it back on

  - by Oli

  I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

  Read the article

• How to switch off wifi on startup or from the console

  - by mit

  I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

  Read the article

• Ubuntu 12.04 share the internet over WiFi from wvdial?

  - by Sour Lemon

  I have just installed Ubuntu 12.04 on a separate partition on my hard drive so I can dual boot to either Windows 7 or Ubuntu. I am living in Japan and so I'm using a mobile broadband USB device called "Softbank C02LC". By default it seems that this device isn't recognised so I did the following: Terminal: sudo su nano /usr/bin/usbModemScript Nano: #!/bin/bash echo 1c9e 9900 > /sys/bus/usb-serial/drivers/option1/new_id Terminal: chmod +x /usr/bin/usbModemScript nano /etc/udev/rules.d/option.rules Nano: ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/usr/bin/usbModemScript" ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/sbin/modprobe option" which made the device visible from the network manager etc. However even though I set up my details correctly when I created a new connection (Correct username, APN etc) as soon as I try to connect it almost immediately disconnects. Because of this I then followed the instructions at this site: http://debugitos.main.jp/index.php?Ubuntu%2F%A5%E2%A5%D0%A5%A4%A5%EB%A5%A4%A5%F3%A5%BF%A1%BC%A5%CD%A5%C3%A5%C8 And I ended up using the c02lc_connect script at the bottom of the page to connect to the internet. The file contains the following bash script: #!/bin/sh usbinterfece=/dev/ttyUSB2 VID=1c9e PID=9900 WRONG_PID=f000 LSUSB=/usr/sbin/lsusb GREP=/bin/grep MODPROBE=/sbin/modprobe SWITCH=/usr/sbin/usb_modeswitch SWITCH_D=/etc/usb_modeswitch.d WVDIAL=/usr/bin/wvdial SLEEP=/bin/sleep SUDO=/usr/bin/sudo WHICH=/usr/bin/which switch_config="$SWITCH_D/$VID:$WRONG_PID" if ! [ -x $WVDIAL -a -x $SWITCH ]; then echo "Install wvdial and usb_modeswitch." exit 0 fi check_usb() { local vid="$1" local pid="$2" ($LSUSB | $GREP "$vid:$pid") } if ! (check_usb "$VID" "$PID"); then echo "Cannot find modem device..." if (check_usb "$VID" "$WRONG_PID") && ( [ -f "$switch_config" ] ); then echo "The device is attached but its mode is wrong." echo "Try usb_modeswitch..." $SUDO $SWITCH -c "$switch_config" $SLEEP 1 if (check_usb "$VID" "$PID"); then echo "Successfully switched the mode." else echo "Failed to switch the mode..." exit 1 fi else exit 1 fi fi if [ ! -c "$usbinterface" ]; then $SUDO $MODPROBE usbserial vendor=0x$VID product=0x$PID $SLEEP 2 fi $SUDO $WVDIAL which works completely fine - no problems what-so-ever. But we also have 1 more laptop here which I need to share the internet connection with. In Windows 7 I do this with the Connectify program, and in Ubuntu I have seen that you can do things like set up hotspots etc. But because I am using WvDial I am not sure how I would share the internet. I am only beginning to use Ubuntu but unfortunately until I can figure out how to share the internet over WiFi when connected via WvDial I have to stick with Windows. If you have any ideas on how to do this it would be much appreciated!

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• Failed to start up after upgrading software

  - by Landy

  I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

  Read the article

• Sass interface in HTML6 for upload files.

  - by Anirudha

  Originally posted on: http://geekswithblogs.net/anirugu/archive/2013/11/04/sass-interface-in-html6-for-upload-files.aspx[This post is about experiment & imagination] From Windows XP (ever last OS I tried) I have seen a feature that is about send file to pen drive and make shortcut on Desktop. In XP, Win7 (Win8 have this too, not removed) just select the file right click > send to and you can send this file to many places. In my menu it’s show me Skype because I have installed it. this skype confirm that we can add our own app here to make it more easy for user to send file in our app. Nowadays Many people use Cloud or online site to store the file. In case of html5 drag and drop you need to have site opened and have opened that page which is about file upload. You need to select all  and drag and drop. after drag and drop file is simply uploaded to server and site show you on list (if no error happen). but this file upload is seriously not worthy since I have to open the site when I do this operation.   Through this post I want to describe a feature that can make this thing better.  This API is simply called SASS FILE UPLOAD API Through This API when you surf the site and come into file upload page then the page will tell you that we also have SASS FILE API support. Enable it for better result.   How this work This API feature are activated on 2 basis. 1. Feature are disabled by default on site (or you can change it if it’s not) 2. This API allow specific site to upload the files. Files upload may have some rule. For example (minimum or maximum size of file to uploaded, which format the site allowed you to upload). In case of resume site you will be allowed to use .doc (according to code of site)   How browser recognize that Site have SASS service. In HTML source of  the site, the code have a meta tag similar to this <meta name=”sass-upload-api” path=”/upload.json”/> Remember that upload.json is one file that has define the value of many settings {   "cookie_name": "ck_file",   "maximum_allowed_perday": 24,   "allowed_file_extensions","*.png,*.jpg,*.jpeg,*.gif",   "method": [       {           "get": "file/get",           "routing":"/file/get/{fileName}"       },       {           "post": "file/post",           "routing":"/file/post/{fileName}"       },       {           "delete": "file/delete",           "routing":"/file/delete/{fileName}"       },         {           "put": "file/put",           "routing":"/file/put/{fileName}"       },        {           "all": "file/all",           "routing":"/file/all/{fileName}"       }    ] } cookie name is simply a cookie which should be stored in browser and define in json. we define the cookie_name so we can easily share then with service in Windows system. This cookie will be accessible with the service so it’s security based safe. other cookie will not be shared.   The cookie will be post,put, get from this location. The all location will be simply about showing a whole list of file. This will gave a treeview kind of json to show the directories on sever.   for example example.com if you have activated the API with this site then you will seen a send to option in your explorer.exe when you send you will got a windows open which folder you want to use to send the file. The windows will also describe the limit and how much you can upload. This thing never required site to opened. When you upload the file this will be uploaded through FTP protocol. FTP protocol are better for performance.   How this API make thing faster. Suppose you want to ask a question and want to post image. you just do it and get it ready when you open stackoverflow.com now stackoverflow will only tell you which file you want to put on your current question that you asking for. second use is about people use cloud app.   There is no need of drag and drop anymore. we just need to do it without drag and drop it. we doesn’t need to open the site either. This thing is still in experiment level. I will update this post when I got some progress on this API.

  Read the article

• Failed to start up after upgrading software in ubuntu 10.10

  - by Landy

  I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

  Read the article

• Hooking DirectX EndScene from an injected DLL

  - by Etan

  I want to detour EndScene from an arbitrary DirectX 9 application to create a small overlay. As an example, you could take the frame counter overlay of FRAPS, which is shown in games when activated. I know the following methods to do this: Creating a new d3d9.dll, which is then copied to the games path. Since the current folder is searched first, before going to system32 etc., my modified DLL gets loaded, executing my additional code. Downside: You have to put it there before you start the game. Same as the first method, but replacing the DLL in system32 directly. Downside: You cannot add game specific code. You cannot exclude applications where you don't want your DLL to be loaded. Getting the EndScene offset directly from the DLL using tools like IDA Pro 4.9 Free. Since the DLL gets loaded as is, you can just add this offset to the DLL starting address, when it is mapped to the game, to get the actual offset, and then hook it. Downside: The offset is not the same on every system. Hooking Direct3DCreate9 to get the D3D9, then hooking D3D9-CreateDevice to get the device pointer, and then hooking Device-EndScene through the virtual table. Downside: The DLL cannot be injected, when the process is already running. You have to start the process with the CREATE_SUSPENDED flag to hook the initial Direct3DCreate9. Creating a new Device in a new window, as soon as the DLL gets injected. Then, getting the EndScene offset from this device and hooking it, resulting in a hook for the device which is used by the game. Downside: as of some information I have read, creating a second device may interfere with the existing device, and it may bug with windowed vs. fullscreen mode etc. Same as the third method. However, you'll do a pattern scan to get EndScene. Downside: doesn't look that reliable. How can I hook EndScene from an injected DLL, which may be loaded when the game is already running, without having to deal with different d3d9.dll's on other systems, and with a method which is reliable? How does FRAPS for example perform it's DirectX hooks? The DLL should not apply to all games, just to specific processes where I inject it via CreateRemoteThread.

  Read the article

• Bluetooth connect to a RS232 adapter in android

  - by ThePosey

  Hello All, I am trying to use the Bluetooth Chat sample API app that google provides to connect to a bluetooth RS232 adapter hooked up to another device. Here is the app for reference: http://developer.android.com/resources/samples/BluetoothChat/index.html And here is the spec sheet for the RS232 connector just for reference: http://serialio.com/download/Docs/BlueSnap-guide-4.77%5FCommands.pdf Well the problem is that when I go to connect to the device with: mmSocket.connect(); (BluetoothSocket::connect()) I always get an IOException error thrown by the connect method. When I do a toString on the exception I get "Service discovery failed". My question is mostly what are the cases that would cause an IOException to get thrown in the connect method? I know those are in the source somewhere but I don't know exactly how the java layer that you write apps in and the C/C++ layer that contains the actual stacks interface. I know that it uses the bluez bluetooth stack which is written in C/C++ but not sure how that ties into the java layer which is what I would think is throwing the exception. Any help on pointing me to where I can try to dissect this issue would be incredible. Also just to note I am able to pair with the RS232 adapter just fine but I am never able to actually connect. Here is the logcat output for more reference: I/ActivityManager( 1018): Displayed activity com.example.android.BluetoothChat/.DeviceListActivity: 326 ms (total 326 ms) E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) D/BluetoothChat( 1729): onActivityResult -1 D/BluetoothChatService( 1729): connect to: 00:06:66:03:0C:51 D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_CONNECTING E/BluetoothChat( 1729): + ON RESUME + I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_CONNECTING I/BluetoothChatService( 1729): BEGIN mConnectThread E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 I/BluetoothChatService( 1729): CONNECTION FAIL TOSTRING: java.io.IOException: Service discovery failed D/BluetoothChatService( 1729): setState() STATE_CONNECTING - STATE_LISTEN D/BluetoothChatService( 1729): start D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_LISTEN I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID I/NotificationService( 1018): enqueueToast pkg=com.example.android.BluetoothChat callback=android.app.ITransientNotification$Stub$Proxy@446327c8 duration=0 I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID The device I'm trying to connect to is the 00:06:66:03:0C:51 which I can scan for and apparently pair with just fine.

  Read the article

• Blackberry Development, adding dynamic number of buttons and setting Fieldchangelistener() for them

  - by Nikesh Yadav

  Hi, I am adding dynamic number of buttons in a Blackberry application and trying to get different events on each button click. I am not able to apply the setchangelistener() for these array of buttons as once the loop finishes after adding all the buttons, the events gets generated only for the last indexed button. If I make us of getIndex(), it runs fine only if I am not adding any other fields on my screen, but if I add other fields along with these array of buttons, the getIndex() function count them in the indexing as well. Can anyone please help me out in setting FieldChangeListener to array of ButtonField? Here is a sample code of the way I am using the array of ButtonField. I the code I have added two test LabelField at the top of the screen, if I remove them the code will run fine and I will get different result for each button click, but if I keep them active, the indexing gets effected and the Button wont work. package buttonclickloop; import net.rim.device.api.ui.DrawStyle; import net.rim.device.api.ui.Field; import net.rim.device.api.ui.FieldChangeListener; import net.rim.device.api.ui.component.ButtonField; import net.rim.device.api.ui.component.LabelField; import net.rim.device.api.ui.container.HorizontalFieldManager; import net.rim.device.api.ui.container.MainScreen; public class ButtoncClickLoop extends MainScreen { int i = 0; private ButtonField[] btn = new ButtonField[50]; public ButtoncClickLoop() { // TODO Auto-generated constructor stub LabelField Field1 = new LabelField("Field1"); LabelField Field2 = new LabelField("Field2",DrawStyle.RIGHT | ButtonField.USE_ALL_WIDTH); HorizontalFieldManager FieldHmgr = new HorizontalFieldManager(); FieldHmgr.add(Field1); FieldHmgr.add(Field2); FieldHmgr.setMargin(0,0,10,5); add(FieldHmgr); while (i < 3){ FieldChangeListener listener = new FieldChangeListener() { public void fieldChanged(Field field, int context) { context = field.getIndex(); if (field == btn[context]){ add(new LabelField("Label" + context + "")); } } }; btn[i] = new ButtonField("Button" + i + ""); btn[i].setChangeListener(listener); add(btn[i]); i = i + 1; } } } Thanks, Nikesh

  Read the article

• Postgresql: Implicit lock acquisition from foreign-key constraint evaluation

  - by fennec

  So, I'm being confused about foreign key constraint handling in Postgresql. (version 8.4.4, for what it's worth). We've got a couple of tables, mildly anonymized below: device: (id, blah, blah, blah, blah, blah x 50)… primary key on id whooooole bunch of other junk device_foo: (id, device_id, left, right) Foreign key (device_id) references device(id) on delete cascade; primary key on id btree index on 'left' and 'right' So I set out with two database windows to run some queries. db1> begin; lock table device in exclusive mode; db2> begin; update device_foo set left = left + 1; The db2 connection blocks. It seems odd to me that an update of the 'left' column on device_stuff should be affected by activity on the device table. But it is. In fact, if I go back to db1: db1> select * from device_stuff for update; *** deadlock occurs *** The pgsql log has the following: blah blah blah deadlock blah. CONTEXT: SQL statement "SELECT 1 FROM ONLY "public"."device" x WHERE "id" OPERATOR(pg_catalog.=) $1 FOR SHARE OF X: update device_foo set left = left + 1; I suppose I've got two issues: the first is that I don't understand the precise mechanism by which this sort of locking occurs. I have got a couple of useful queries to query pg_locks to see what sort of locks a statement invokes, but I haven't been able to observe this particular sort of locking when I run the update device_foo command in isolation. (Perhaps I'm doing something wrong, though.) I also can't find any documentation on the lock acquisition behavior of foreign-key constraint checks. All I have is a log message. Am I to infer from this that any change to a row will acquire an update lock on all the tables which it's foreign-keyed against? The second issue is that I'd like to find some way to make it not happen like that. I'm ending up with occasional deadlocks in the actual application. I'd like to be able to run big update statements that impact all rows on device_foo without acquiring a big lock on the device table. (There's a lot of access going on in the device table, and it's kind of an expensive lock to get.)

  Read the article

• Flow-Design Cheat Sheet &ndash; Part I, Notation

  - by Ralf Westphal

  You want to avoid the pitfalls of object oriented design? Then this is the right place to start. Use Flow-Oriented Analysis (FOA) and –Design (FOD or just FD for Flow-Design) to understand a problem domain and design a software solution. Flow-Orientation as described here is related to Flow-Based Programming, Event-Based Programming, Business Process Modelling, and even Event-Driven Architectures. But even though “thinking in flows” is not new, I found it helpful to deviate from those precursors for several reasons. Some aim at too big systems for the average programmer, some are concerned with only asynchronous processing, some are even not very much concerned with programming at all. What I was looking for was a design method to help in software projects of any size, be they large or tiny, involing synchronous or asynchronous processing, being local or distributed, running on the web or on the desktop or on a smartphone. That´s why I took ideas from all of the above sources and some additional and came up with Event-Based Components which later got repositioned and renamed to Flow-Design. In the meantime this has generated some discussion (in the German developer community) and several teams have started to work with Flow-Design. Also I´ve conducted quite some trainings using Flow-Orientation for design. The results are very promising. Developers find it much easier to design software using Flow-Orientation than OOAD-based object orientation. Since Flow-Orientation is moving fast and is not covered completely by a single source like a book, demand has increased for at least an overview of the current state of its notation. This page is trying to answer this demand by briefly introducing/describing every notational element as well as their translation into C# source code. Take this as a cheat sheet to put next to your whiteboard when designing software. However, please do not expect any explanation as to the reasons behind Flow-Design elements. Details on why Flow-Design at all and why in this specific way you´ll find in the literature covering the topic. Here´s a resource page on Flow-Design/Event-Based Components, if you´re able to read German. Notation Connected Functional Units The basic element of any FOD are functional units (FU): Think of FUs as some kind of software code block processing data. For the moment forget about classes, methods, “components”, assemblies or whatever. See a FU as an abstract piece of code. Software then consists of just collaborating FUs. I´m using circles/ellipses to draw FUs. But if you like, use rectangles. Whatever suites your whiteboard needs best.   The purpose of FUs is to process input and produce output. FUs are transformational. However, FUs are not called and do not call other FUs. There is no dependency between FUs. Data just flows into a FU (input) and out of it (output). From where and where to is of no concern to a FU.   This way FUs can be concatenated in arbitrary ways:   Each FU can accept input from many sources and produce output for many sinks:   Flows Connected FUs form a flow with a start and an end. Data is entering a flow at a source, and it´s leaving it through a sink. Think of sources and sinks as special FUs which conntect wires to the environment of a network of FUs.   Wiring Details Data is flowing into/out of FUs through wires. This is to allude to electrical engineering which since long has been working with composable parts. Wires are attached to FUs usings pins. They are the entry/exit points for the data flowing along the wires. Input-/output pins currently need not be drawn explicitly. This is to keep designing on a whiteboard simple and quick.   Data flowing is of some type, so wires have a type attached to them. And pins have names. If there is only one input pin and output pin on a FU, though, you don´t need to mention them. The default is Process for a single input pin, and Result for a single output pin. But you´re free to give even single pins different names.   There is a shortcut in use to address a certain pin on a destination FU:   The type of the wire is put in parantheses for two reasons. 1. This way a “no-type” wire can be easily denoted, 2. this is a natural way to describe tuples of data.   To describe how much data is flowing, a star can be put next to the wire type:   Nesting – Boards and Parts If more than 5 to 10 FUs need to be put in a flow a FD starts to become hard to understand. To keep diagrams clutter free they can be nested. You can turn any FU into a flow: This leads to Flow-Designs with different levels of abstraction. A in the above illustration is a high level functional unit, A.1 and A.2 are lower level functional units. One of the purposes of Flow-Design is to be able to describe systems on different levels of abstraction and thus make it easier to understand them. Humans use abstraction/decomposition to get a grip on complexity. Flow-Design strives to support this and make levels of abstraction first class citizens for programming. You can read the above illustration like this: Functional units A.1 and A.2 detail what A is supposed to do. The whole of A´s responsibility is decomposed into smaller responsibilities A.1 and A.2. FU A thus does not do anything itself anymore! All A is responsible for is actually accomplished by the collaboration between A.1 and A.2. Since A now is not doing anything anymore except containing A.1 and A.2 functional units are devided into two categories: boards and parts. Boards are just containing other functional units; their sole responsibility is to wire them up. A is a board. Boards thus depend on the functional units nested within them. This dependency is not of a functional nature, though. Boards are not dependent on services provided by nested functional units. They are just concerned with their interface to be able to plug them together. Parts are the workhorses of flows. They contain the real domain logic. They actually transform input into output. However, they do not depend on other functional units. Please note the usage of source and sink in boards. They correspond to input-pins and output-pins of the board.   Implicit Dependencies Nesting functional units leads to a dependency tree. Boards depend on nested functional units, they are the inner nodes of the tree. Parts are independent, they are the leafs: Even though dependencies are the bane of software development, Flow-Design does not usually draw these dependencies. They are implicitly created by visually nesting functional units. And they are harmless. Boards are so simple in their functionality, they are little affected by changes in functional units they are depending on. But functional units are implicitly dependent on more than nested functional units. They are also dependent on the data types of the wires attached to them: This is also natural and thus does not need to be made explicit. And it pertains mainly to parts being dependent. Since boards don´t do anything with regard to a problem domain, they don´t care much about data types. Their infrastructural purpose just needs types of input/output-pins to match.   Explicit Dependencies You could say, Flow-Orientation is about tackling complexity at its root cause: that´s dependencies. “Natural” dependencies are depicted naturally, i.e. implicitly. And whereever possible dependencies are not even created. Functional units don´t know their collaborators within a flow. This is core to Flow-Orientation. That makes for high composability of functional units. A part is as independent of other functional units as a motor is from the rest of the car. And a board is as dependend on nested functional units as a motor is on a spark plug or a crank shaft. With Flow-Design software development moves closer to how hardware is constructed. Implicit dependencies are not enough, though. Sometimes explicit dependencies make designs easier – as counterintuitive this might sound. So FD notation needs a ways to denote explicit dependencies: Data flows along wires. But data does not flow along dependency relations. Instead dependency relations represent service calls. Functional unit C is depending on/calling services on functional unit S. If you want to be more specific, name the services next to the dependency relation: Although you should try to stay clear of explicit dependencies, they are fundamentally ok. See them as a way to add another dimension to a flow. Usually the functionality of the independent FU (“Customer repository” above) is orthogonal to the domain of the flow it is referenced by. If you like emphasize this by using different shapes for dependent and independent FUs like above. Such dependencies can be used to link in resources like databases or shared in-memory state. FUs can not only produce output but also can have side effects. A common pattern for using such explizit dependencies is to hook a GUI into a flow as the source and/or the sink of data: Which can be shortened to: Treat FUs others depend on as boards (with a special non-FD API the dependent part is connected to), but do not embed them in a flow in the diagram they are depended upon.   Attributes of Functional Units Creation and usage of functional units can be modified with attributes. So far the following have shown to be helpful: Singleton: FUs are by default multitons. FUs in the same of different flows with the same name refer to the same functionality, but to different instances. Think of functional units as objects that get instanciated anew whereever they appear in a design. Sometimes though it´s helpful to reuse the same instance of a functional unit; this is always due to valuable state it holds. Signify this by annotating the FU with a “(S)”. Multiton: FUs on which others depend are singletons by default. This is, because they usually are introduced where shared state comes into play. If you want to change them to be a singletons mark them with a “(M)”. Configurable: Some parts need to be configured before the can do they work in a flow. Annotate them with a “(C)” to have them initialized before any data items to be processed by them arrive. Do not assume any order in which FUs are configured. How such configuration is happening is an implementation detail. Entry point: In each design there needs to be a single part where “it all starts”. That´s the entry point for all processing. It´s like Program.Main() in C# programs. Mark the entry point part with an “(E)”. Quite often this will be the GUI part. How the entry point is started is an implementation detail. Just consider it the first FU to start do its job.   Patterns / Standard Parts If more than a single wire is attached to an output-pin that´s called a split (or fork). The same data is flowing on all of the wires. Remember: Flow-Designs are synchronous by default. So a split does not mean data is processed in parallel afterwards. Processing still happens synchronously and thus one branch after another. Do not assume any specific order of the processing on the different branches after the split.   It is common to do a split and let only parts of the original data flow on through the branches. This effectively means a map is needed after a split. This map can be implicit or explicit.   Although FUs can have multiple input-pins it is preferrable in most cases to combine input data from different branches using an explicit join: The default output of a join is a tuple of its input values. The default behavior of a join is to output a value whenever a new input is received. However, to produce its first output a join needs an input for all its input-pins. Other join behaviors can be: reset all inputs after an output only produce output if data arrives on certain input-pins

  Read the article

• DIY a simple .inf on an existing .sys?

  - by Stijn Sanders

  In continuation of attempting to get an old Digi ST-1032 working on a new server, we've downgraded a server to Windows 2000 in an attempt to use the NT4 drivers. And it works, the old software setup works, finds the device on the SCSI bus, and connects the 32 ports to COM3..COM34 or any other set using the port remapper tool. The minor issue that remains is that Plug-and-Play still detects this device over SCSI and tries to wizard you into selecting a driver for it. Which doesn't exists (Digi Intl support confirms this device is so old, a 2000 or XP driver was never made). The exact name displayed is "DigiIntl ST-1032 SCSI Net Device" (Oddly enough, two devices get detected with this name, on two neighbouring LUN's, could one be the built-in terminator?) Is there a way to concoct a simple .inf that would (re-)register the existing sts.sys that appears to get registered by the (old) installer of the driver software?

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >