Search Results

Search found 5057 results on 203 pages for 'force'.

Page 143/203 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by Torben Gundtofte-Bruun

  My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

  Read the article

• Unable to find good parameters for behavior of a puck in Farseer

  - by Krumelur

  EDIT: I have tried all kinds of variations now. The last one was to adjust the linear velocity in each step: newVel = oldVel * 0.9f - all of this including your proposals kind of work, however in the end if the velocity is little enough, the puck sticks to the wall and slides either vertically or horizontally. I can't get rid of this behavior. I want it to bounce, no matter how slow it is. Retitution is 1 for all objects, Friction is 0 for all. There is no gravity. What am I possibly doing wrong? In my battle to learn and understand Farseer I'm trying to setup a simple Air Hockey like table with a puck on it. The table's border body is made up from: Vertices aBorders = new Vertices( 4 ); aBorders.Add( new Vector2( -fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, -fHalfHeight ) ); aBorders.Add( new Vector2( -fHalfWidth, -fHalfHeight ) ); FixtureFactory.AttachLoopShape( aBorders, this ); this.CollisionCategories = Category.All; this.CollidesWith = Category.All; this.Position = Vector2.Zero; this.Restitution = 1f; this.Friction = 0f; The puck body is defined with: FixtureFactory.AttachCircle( DIAMETER_PHYSIC_UNITS / 2f, 0.5f, this ); this.Restitution = 0.1f; this.Friction = 0.5f; this.BodyType = FarseerPhysics.Dynamics.BodyType.Dynamic; this.LinearDamping = 0.5f; this.Mass = 0.2f; I'm applying a linear force to the puck: this.oPuck.ApplyLinearImpulse( new Vector2( 1f, 1f ) ); The problem is that the puck and the walls appear to be sticky. This means that the puck's velocity drops to zero to quickly below a certain velocity. The puck gets reflected by the walls a couple of times and then just sticks to the left wall and continues sliding downwards the left wall. This looks very unrealistic. What I'm really looking for is that a puck-wall-collision does slow down the puck only a tiny little bit. After tweaking all values left and right I was wondering if I'm doing something wrong. Maybe some expert can comment on the parameters?

  Read the article

• Turn-Based RPG Battle Instance Layout For Larger Groups

  - by SoulBeaver

  What a title, eh? I'm currently designing a videogame; a turn-based RPG like Final Fantasy (because everybody knows Final Fantasy). It's a 2D sprite game. These are my ideas for combat: -The player has a group of 15 members (main character included) -During battle, five of the group are designated as active, and appear in the battle. -These five may be switched out at leisure, or when one of the five die. -At any time, the Waiting members can cast buffs, be healed by the active members, or perform special attacks. -Battles should contain 10+ monsters at least. I'm aiming for 20, but I'm not sure if that's possible yet. -Battles should feel larger than normal due to the interaction of Waiting members, active members and the increased amount of monsters per battle. -The player has two rows in which to put the Active members: front and back. -Depending on the implementation, I might allow comboing of player attacks and skills. These are just design ideas, so beware! I have not been able to test this out yet- I have no idea yet if any of these ideas bunched together will make for a compelling game. What sounds good on paper doesn't necessarily have to be good in practice! What I'm asking now is how to create the layout for this. My starting point are the battles in Final Fantasy VI, with up to 5-6 monsters on the left and the characters on the right- monsters on both sides if it's a pincer attack. However, this view would not work feasible with my goal of 20 monsters and 5 characters. All the monsters on the left would appear cluttered unless I scale them far far back. If I create a pincer-like map, then there would be no real pincer-attack possible. If I space the monsters out I force the player to scroll the screen- a game mechanic I've come across and not enjoyed imho. My question is: does anybody have any layouts or guides for designing battle maps in turn-based RPGs, especially with a larger number of enemies taken into consideration? How should it look? I am not asking for specific combat mechanics, just the layout for the moment.

  Read the article

• Java Cloud Service for developers

  - by JuergenKress

  The advent of cloud computing has reinvented application development for many companies. “That’s the beauty of the cloud,” says Cameron Purdy, vice president of development, Oracle. “It dramatically improves developer productivity because they can do what they do best without having to manage complex development, testing, staging, and production environments.” The key is to find a platform that doesn’t impose proprietary restrictions or force developers to learn new tools. For example, Oracle Java Cloud Service is an enterprise-grade platform as a service for building and deploying Java EE, Oracle WebLogic Server, and Oracle Application Development Framework (Oracle ADF) applications. “It’s designed to be flexible and easy to use,” says Purdy. “And it is also a standards-based solution -it’s not proprietary and there is no cloud lock-in. Developers get instant access to an enterprise-grade environment for a simple, monthly subscription.” Oracle Java Cloud Service instances are created with just a few clicks, so businesses can create a rich application development environment within minutes. Running on Oracle WebLogic Server and Oracle Exalogic, the underlying infrastructure also leverages Oracle Fusion Middleware’s integration with common services. For example, instances come integrated and preconfigured with optimized Oracle Database and Oracle Identity Management configurations. Based on Oracle Enterprise Manager, the Oracle Java Cloud Service console lets customers easily manage and monitor their Oracle Java Cloud Service instances. The open nature of the Oracle Java Cloud Service lets developers integrate through Web services such as SOAP and REST APIs, as well as use their favorite developer tools, whether they are out-of-the-box tools such as Maven and Ant or the productivity features built into Oracle JDeveloper, Oracle Enterprise Pack for Eclipse, or NetBeans IDE. The service allows for the seamless movement of applications between on-premise Oracle WebLogic Server domains and instances of Oracle Java Cloud Service within Oracle Cloud. This approach allows flexibility to mix and match the use of on-premise environments with cloud instances for development, test, and production environments. Visit to learn more and watch videos about Oracle Java Cloud Service. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: java,cloud,oracle cloud,java cloud,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• Is there a usage count for packages or programs?

  - by math

  Motivation: I want to remove applications I do not use to speed up my package processing tasks like dist upgrades, regular updates, but also for saving disk space and other reasons. I know this is a complex topic so first I will ask my question and second I will give some answers I already found out. Question: How do I find out which package I did not used at all? For example I always use the VLC so I could remove totem package. (Which I could have been used some day, yes.) Of course package dependencies could force me to have programs installed which I will never use. Notes: Find the packages which consume much space via synaptic: Select "Status" in lower left, select "Installed" in upper left, sort column on "size" in upper right. Then you can decide which big packages you really need. Use aptitude autoremove Use ubuntu-tweak's Janitor for removing old kernel packages, old configs, apt-cache entries, etc. Manually search for applications for a given task that you usually solve with your standard app. E.g. Movie player, Music player, Office program, Browser etc. (BTW: this is what I want to be helped with my question) When removing packages I always favour "apt-get purge" over "aptitude remove --purge" as aptitude often will also remove essential packages due to package dependencies. E.g. when removing "evolution" (as I use thunderbird) aptitude wants to remove also "ubuntu-desktop" and 756 other packages as well, while apt-get just removes evolution and its helping pacakges like evolution-common. Ubuntu lense gives me most recent used applications which are candidates for keeping :) Employ deborphan as I read in this related answer: How do I clean up my harddrive? I should certainly keep essential packages: Keep only essential packages This question is pretty much a duplicate of How to see what installed packages I have never used for cleaning purposes but covering only few aspects. However one answer suggests to use a program called unusedpkg but the link seems down. There is also a program called Kleen http://code.google.com/p/kleen/ but it won't compile in 11.10. However I hacked it to compile but the results are unusable, as for example the g++ package was marked as not used for 203, but actually I used it seconds ago for compiling Kleen itself ;) So don't use this tool. On http://wiki.debian.org/DebianPackageInformation I read the the package popularity-contest will produce log files with usage statistics. Unfortunately I didn't enabled the popularity contest so I can't find this log file.

  Read the article

• ArchBeat Link-o-Rama for 10-24-2012

  - by Bob Rhubart

  Play Oracle Vanquisher Here's a little respite from whatever it is you normally spend your time on. Oracle Vanquisher is an online diversion that makes a game of data center optimization. According to the description: "Armed with a cool Oracle vacuum pack suit and a strategic IT roadmap, you will thwart threats and optimize your data center to increase your company’s stock price and boost your company's position." Mainly you avoid electric shock and killer birds. The current high score belongs to someone identified as "TEN." My score? Never mind. Book: DevOps for Developers | The Java Source The subject of DevOps has come up in a couple of recent OTN ArchBeat Podcasts, so it's somewhat serendipitous that Tori Weildt's recent blog post offers an overview of Java Champion Michael Hutterman's new book, DevOps for Developers, now available from Apress. Bring Your Own Device (BYOD) : Context is everything… | The ORACLE-BASE Blog BOYD is a factor in the evolution of IT, but in what context? "The real IT work in companies is still being done on PCs," says Oracle ACE Director Tim Hall. "Yes, you can use a cloud service on your phone, but look around the office and you will see those cloud services are actually being used by people on PCs." Oracle in the Cloud: Oracle EBusiness Suite sizing | Tom Laszewski Cloud expert Tom Laszewski shares several technical resources that will be helpful for sizing of Oracle EBusiness Suite. Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster Author and expert Yuli Vasiliev shows you how take advantage of multiple Oracle WebLogic Server instances grouped into a cluster to maximize scalability and availability. Webcast: Reduce Costs with Oracle's Database Storage Management Watch this! Join Oracle experts Kevin Jernigan and Margaret Hamburger for an interactive webcast in which you'll learn how Oracle's Database Storage Management can reduce storage costs and management complexity while improving query performance to meet service-level agreements and compliance requirements. Event Date: Tuesday, November 6, 2012 Event Time: 10 a.m. PT/1 p.m. ET Thought for the Day "Most software today is very much like an Egyptian pyramid with millions of bricks piled on top of each other, with no structural integrity, but just done by brute force and thousands of slaves." — Alan Kay Source: softwarequotes.com

  Read the article

• SharePoint 2010 HierarchicalConfig Caching Problem

  - by Damon

  We've started using the Application Foundations for SharePoint 2010 in some of our projects at work, and I came across a nasty issue with the hierarchical configuration settings.  I have some settings that I am storing at the Farm level, and as I was testing my code it seemed like the settings were not being saved - at least that is what it appeared was the case at first.  However, I happened to reset IIS and the settings suddenly appeared.  Immediately, I figured that it must be a caching issue and dug into the code base.  I found that there was a 10 second caching mechanism in the SPFarmPropertyBag and the SPWebAppPropertyBag classes.  So I ran another test where I waited 10 seconds to make sure that enough time had passed to force the caching mechanism to reset the data.  After 10 minutes the cache had still not cleared.  After digging a bit further, I found a double lock check that looked a bit off in the GetSettingsStore() method of the SPFarmPropertyBag class: if (_settingStore == null || (DateTime.Now.Subtract(lastLoad).TotalSeconds) > cacheInterval)) { //Need to exist so don't deadlock. rrLock.EnterWriteLock(); try { //make sure first another thread didn't already load... if (_settingStore == null) { _settingStore = WebAppSettingStore.Load(this.webApplication); lastLoad = DateTime.Now; } } finally { rrLock.ExitWriteLock(); } } What ends up happening here is the outer check determines if the _settingStore is null or the cache has expired, but the inner check is just checking if the _settingStore is null (which is never the case after the first time it's been loaded).  Ergo, the cached settings are never reset.  The fix is really easy, just add the cache checking back into the inner if statement. //make sure first another thread didn't already load... if (_settingStore == null || (DateTime.Now.Subtract(lastLoad).TotalSeconds) > cacheInterval) { _settingStore = WebAppSettingStore.Load(this.webApplication); lastLoad = DateTime.Now; } And then it starts working just fine. as long as you wait at least 10 seconds for the cache to clear.

  Read the article

• Oracle Open World - the technologist's fall classic

  - by user581320

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Well its September and the calendar is charging towards fall. I realized today that another summer had passed as the first rain in months fell here in northern California redwood country. If its fall that means that Oracle Open World is right around the corner and that tens of thousands of technology professionals will soon converge on San Francisco to fill every hotel and every corner of their minds. As in years past, team UPK will be there in force to answer questions, demo and discuss all things UPK. On Thursday, October 4, from 12:45pm to 1:45pm I along with several of my UPK teammates will be manning the User Productivity Kit Panel - Best Practices to Manage and Deploy Content. This session is an interactive session intended as an opportunity to get your UPK questions answered. To get things started we will answer some questions submitted in advance. If you have any questions or subject areas you’d like addressed during the session, let me know here in the blog and then come to the session and we’ll do our best to answer your questions.  Peter Maravelias UPK Product Management

  Read the article

• Forced to be trained [closed]

  - by steeb

  is it OK to force employees to take a training in order to make them sign a contract to stay in the job for X years? Here I'm the only developer in the company and before this job I've developed in VB6, VB.Net and others. There are others technicians here but they query the database server to make reports and make little programs but do not spend all day in programming. I was hired here to manage some legacy data to be migrated to a new system and I used my experience to accomplish the task. I also have made some utilities and other developments. Since we went live with the new system I've been developing a lot of side programs, add-ons and changed the source code of it and basically I've been learning from it since then and became some sort of jack of all trades when some feature needs to be changed or corrected. I have one and a half year in this company but during the last 8 months I've been entirely programming in the system. There have been times when even the implementers ask me how I accomplish certain things. The issue here is that the company has come and told me and other co-workers (which do not program in the system but know basic programming and databases) to have a basic training to program for the new system's platform and when we finish it we will sign a contract to stay in the company for an unspecified time. They have offered also an unspecified better salary. I'm feeling very suspicious cause I know the basics of system and I don't understand why I have to take it, being known by everybody all developments I've made. I gathered with my boss and told him that I should not take that course because I feel that I can learn more with all the daily requirements I've been asked and they should save that money. But he responded me that I have to take it and sign after that. I think they want me to be with them for a long time, and I'd like to, but my opinion is that I would like to stay in the company because I feel comfortable in all laboral aspects (including salary) but not because I signed a contract forced to do more tasks and forced to say no if I have others and better job offers. What advice can you give me in this kind of situation?

  Read the article

• How to cleanly add after-the-fact commits from the same feature into git tree

  - by Dennis

  I am one of two developers on a system. I make most of the commits at this time period. My current git workflow is as such: there is master branch only (no develop/release) I make a new branch when I want to do a feature, do lots of commits, and then when I'm done, I merge that branch back into master, and usually push it to remote. ...except, I am usually not done. I often come back to alter one thing or another and every time I think it is done, but it can be 3-4 commits before I am really done and move onto something else. Problem The problem I have now is that .. my feature branch tree is merged and pushed into master and remote master, and then I realize that I am not really done with that feature, as in I have finishing touches I want to add, where finishing touches may be cosmetic only, or may be significant, but they still belong to that one feature I just worked on. What I do now Currently, when I have extra after-the-fact commits like this, I solve this problem by rolling back my merge, and re-merging my feature branch into master with my new commits, and I do that so that git tree looks clean. One clean feature branch branched out of master and merged back into it. I then push --force my changes to origin, since my origin doesn't see much traffic at the moment, so I can almost count that things will be safe, or I can even talk to other dev if I have to coordinate. But I know it is not a good way to do this in general, as it rewrites what others may have already pulled, causing potential issues. And it did happen even with my dev, where git had to do an extra weird merge when our trees diverged. Other ways to solve this which I deem to be not so great Next best way is to just make those extra commits to the master branch directly, be it fast-forward merge, or not. It doesn't make the tree look as pretty as in my current way I'm solving this, but then it's not rewriting history. Yet another way is to wait. Maybe wait 24 hours and not push things to origin. That way I can rewrite things as I see fit. The con of this approach is time wasted waiting, when people may be waiting for a fix now. Yet another way is to make a "new" feature branch every time I realize I need to fix something extra. I may end up with things like feature-branch feature-branch-html-fix, feature-branch-checkbox-fix, and so on, kind of polluting the git tree somewhat. Is there a way to manage what I am trying to do without the drawbacks I described? I'm going for clean-looking history here, but maybe I need to drop this goal, if technically it is not a possibility.

  Read the article

• rotating an object on an arc

  - by gardian06

  I am trying to get a turret to rotate on an arc, and have hit a wall. I have 8 possible starting orientations for the turrets, and want them to rotate on a 90 degree arc. I currently take the starting rotation of the turret, and then from that derive the positive, and negative boundary of the arc. because of engine restrictions (Unity) I have to do all of my tests against a value which is between [0,360], and due to numerical precision issues I can not test against specific values. I would like to write a general test without having to go in, and jury rig cases //my current test is: // member variables public float negBound; public float posBound; // found in Start() function (called immediately after construction) // eulerAngles.y is the the degree measure of the starting y rotation negBound = transform.eulerAngles.y-45; posBound = transform.eulerAngles.y+45; // insure that values are within bounds if(negBound<0){ negBound+=360; }else if(posBound>360){ posBound-=360; } // called from Update() when target not in firing line void Rotate(){ // controlls what direction if(transform.eulerAngles.y>posBound){ dir = -1; } else if(transform.eulerAngles.y < negBound){ dir = 1; } // rotate object } follows is a table of values for my different cases (please excuse my force formatting) read as base is the starting rotation of the turret, neg is the negative boundry, pos is the positive boundry, range is the acceptable range of values, and works is if it performs as expected with the current code. |base-|-neg-|-pos--|----------range-----------|-works-| |---0---|-315-|--45--|-315-0,0-45----------|----------| |--45--|---0---|--90--|-0-45,54-90----------|----x----| |-135-|---90--|-180-|-90-135,135-180---|----x----| |-180-|--135-|-225-|-135-180,180-225-|----x----| |-225-|--180-|-270-|-180-225,225-270-|----x----| |-270-|--225-|-315-|-225-270,270-315-|----------| |-315-|--270-|---0---|--270-315,315-0---|----------| I will need to do all tests from derived, or stored values, but can not figure out how to get all of my cases to work simultaneously. //I attempted to concatenate the 2 tests: if((transform.eulerAngles.y>posBound)&&(transform.eulerAngles.y < negBound)){ dir *= -1; } this caused only the first case to be successful // I attempted to store a opposite value, and do a void Rotate(){ // controlls what direction if((transform.eulerAngles.y > posBound)&&(transform.eulerAngles.y<oposite)){ dir = -1; } else if((transform.eulerAngles.y < negBound)&&(transform.eulerAngles.y>oposite)){ dir = 1; } // rotate object } this causes the opposite situation as indicated on the table. What am I missing here?

  Read the article

• Are You Meeting Social Customer Service Expectations?

  - by Mike Stiles

  Whether it’s B2B or B2C, one sure path to repeat business is making sure your buyer has a memorably pleasant and successful customer service experience with you. If they get that kind of treatment consistently, that’s called a relationship. And those aren’t broken easily. Social customer service, driven by integrated SRM (social relationship management) technology, is the venue that can effectively connect customers not only to the brand, but to other customers. Positive experiences, once administered, don’t just rest with the recipient. They’re published in the form of public raves and peer-to-peer recommendation, a force far more actionable than push advertising. What’s more, your customers have come to expect access to you and satisfaction from you using social. An NM Incite study shows 83% of Twitter users and 71% of Facebook users expect to get an answer from brands the same day they post to them on their social assets. To make sure you’re responding, you’ve got to have a tech platform that’s set up to moderate and alert so you’ll know ASAP a customer needs help. The more integrated your social enterprise is, the faster you can not only respond, but respond with the answer they’re looking for, because your system is connected to the internal resources that can surface the answer or put wheels in motion to rectify the situation in the shortest amount of time possible. But if you go to the necessary lengths to make sure your customers feel valued and important, will they really reward you? The study says 71% of consumers who got quick and effective responses from companies they contacted via social were more likely to recommend the brand to their friends and followers. So yes, sweeping people off their feet pays big dividends in terms of word-of-mouth marketing. But you should be keenly aware of the reverse side of that coin. Give people a negative experience, either in real world or virtual customer service, and that message is highly likely to get amplified through social channels faster and louder. Only 36% of the NM Incite study’s respondents reported that their problems were solved quickly and effectively. 36%? That’s hardly an impressive number. It gets worse. 10% never got so much as a response - at all. Going back to the relationship analogy, companies that are this deep in the ditch where customer service is concerned are making their girl or boyfriends really easy for a competitor to steal. Given the technology tools and data available right now for having an intimate knowledge of the customer, what products they’ve purchased, likely problems with those products, effective resolutions to those problems, and follow-up communication to gauge satisfaction, there are fewer excuses than ever for making the lifeblood of your business feel like you couldn’t care less. @mikestiles

  Read the article

• F# and the useful infinite Sequence (I think)

  - by MarkPearl

  So I have seen a few posts done by other F# fans on solving project Euler problems. They looked really interesting and I thought with my limited knowledge of F# I would attempt a few and the first one I had a look at was problem 5. Which said : “2520 is the smallest number that can be divided by each of the numbers from 1 to 10 without any remainder. What is the smallest number that is evenly divisible by all of the numbers from 1 to 20?” So I jumped into coding it and straight away got stuck – the C# programmer in me wants to do a loop, starting at one and dividing every number by 1 to 20 to see if they all divide and once a match is found, there is your solution. Obviously not the most elegant way but a good old brute force approach. However I am pretty sure this would not be the F# way…. So after a bit of research I found the Sequences and how useful they were. Sequences seemed like the beginning of an approach to solve my problem. In my head I thought - create a sequence, and then start at the beginning of it and move through it till you find a value that is divisible by 1 to 20. Sounds reasonable? So the question is begged - how would you create a sequence that you are sure will be large enough to hold the solution to the problem? Well… You can’t know! Some more googling and I found what I would call infinite sequences – something that looks like this… let nums = 1 |> Seq.unfold (fun i -> Some (i, i + 1))   My interpretation of this would be as follows… create a sequence, and whenever it is called add 1 to its size (I would appreciate someone helping me on wording this right functionally). Something that I don’t understand fully yet is the forward pipe operator (|>) which I think plays a key role in this code. With this in hand I was able to code a basic optimized solution to this problem. I’m going to go over it some more before I post the full code just in case!

  Read the article

• Raid superblock missing on single parition. Recovery needed!

  - by user171639

  Ok so I have a 2 TB raid 1 setup that has three partitions: sdc1: linux sdc2: swap sdc3: LVM for data However the LVM will no longer mount. So I thought that I would take the first drive, mount it in linux (ive done this b4), and reset the spare drive to copy the data. Normally I can mount a single drive for data recovery using: sudo su apt-get install mdadm lvm2 mdadm --assemble --scan modprobe dm-mod vgscan vgchange -ay c mount -o ro /dev/c/c /mnt Unfortunately, vgscan doesnot recognize the data partition. It appears as though the superblock on the first drive's data partition was erased while syncing with the second. So now I cannot mount that partition and the second drive is stuck in spare mode. Any ideas? Or a way to force mount the data partition just to copy the data? knoppix@Microknoppix:~$ sudo su root@Microknoppix:/home/knoppix# apt-get install mdadm lvm2 Reading package lists... Done Building dependency tree Reading state information... Done lvm2 is already the newest version. mdadm is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 551 not upgraded. root@Microknoppix:/home/knoppix# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 1 drive (out of 2). mdadm: /dev/md/0 has been started with 1 drive (out of 2). root@Microknoppix:/home/knoppix# modprobe dm-mod root@Microknoppix:/home/knoppix# vgscan Reading all physical volumes. This may take a while... No volume groups found root@Microknoppix:/home/knoppix# cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[2] 4193268 blocks super 1.2 [2/1] [U_] md1 : active raid1 sdc2[2] 524276 blocks super 1.2 [2/1] [U_] unused devices: <none> root@Microknoppix:/home/knoppix# mdadm -v --assemble --auto=yes /dev/md2 /dev/sdc3 mdadm: looking for devices for /dev/md2 mdadm: no recogniseable superblock on /dev/sdc3 mdadm: /dev/sdc3 has no superblock - assembly aborted root@Microknoppix:/home/knoppix# dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.42.4 (12-Jun-2012) Primary superblock at 0, Group descriptors at 1-1 Backup superblock at 32768, Group descriptors at 32769-32769 Backup superblock at 98304, Group descriptors at 98305-98305 Backup superblock at 163840, Group descriptors at 163841-163841 Backup superblock at 229376, Group descriptors at 229377-229377 Backup superblock at 294912, Group descriptors at 294913-294913 Backup superblock at 819200, Group descriptors at 819201-819201 Backup superblock at 884736, Group descriptors at 884737-884737 root@Microknoppix:/home/knoppix# Notes: I can read the super block from the spare drive. I was gonna try and restore the superblock from one of the backups, but i dont know how or if this would work. I also heard creating a new array (mdadm --create) using the same parameters will not delete the data on the drive but i didnt want to risk it. Recommendations?

  Read the article

• SSMS Tools Pack 3.0 is out. Full SSMS 2014 support and improved features.

  - by Mladen Prajdic

  With version 3.0 the SSMS 2014 is fully supported. Since this is a new major version you'll eventually need a new license. Please check the EULA to see when. As a thank you for your patience with this release, everyone that bought the SSMS Tools Pack after April 1st, the release date of SQL Server 2014, will receive a free upgrade. You won't have to do anything for this to take effect. First thing you'll notice is that the UI has been completely changed. It's more in line with SSMS and looks less web-like. Also the core has been updated and rewritten in some places to be better suited for future features. Major improvements for this release are: Window Connection Coloring Something a lot of people have asked me over the last 2 years is if there's a way to color the tab of the window itself. I'm very glad to say that now it is. In SSMS 2012 and higher the actual query window tab is also colored at the top border with the same color as the already existing strip making it much easier to see to which server your query window is connected to even when a window is not focused. To make it even better, you can not also specify the desired color based on the database name and not just the server name. This makes is useful for production environments where you need to be careful in which database you run your queries in. Format SQL The format SQL core was rewritten so it'll be easier to improve it in future versions. New improvement is the ability to terminate SQL statements with semicolons. This is available only in SSMS 2012 and up. Execution Plan Analyzer A big request was to implement the Problems and Solutions tooltip as a window that you can copy the text from. This is now available. You can move the window around and copy text from it. It's a small improvement but better stuff will come. SQL History Current Window History has been improved with faster search and now also shows the color of the server/database it was ran against. This is very helpful if you change your connection in the same query window making it clear which server/database you ran query on. The option to Force Save the history has been added. This is a menu item that flushes the execution and tab content history save buffers to disk. SQL Snippets Added an option to generate snippet from selected SQL text on right click menu. Run script on multiple databases Configurable database groups that you can save and reuse were added. You can create groups of preselected databases to choose from for each server. This makes repetitive tasks much easier New small team licensing option A lot of requests came in for 1 computer, Unlimited VMs option so now it's here. Hope it serves you well.

  Read the article

• Ubuntu 12.04 - PPTP VPN is the only Internet Access

  - by user212553

  I know this has been covered. I've read dozens of posts but still have questions. I have a work server whose traffic should never leave my house without encryption. The VPN is PPTP. Currently I have a cron job that checks the status of the ppp0 adapter each minute. If the connection drops, which it does fairly often, it shuts key components down. It's fairly easy to restart PPTP with "nmcli con up id 'myVPNServer'" but there's no assurance it will reconnect and I need a better way to stop traffic (other than killing apps) when ppp0 is down. The two options I've seen discussed are the firewall (UFW, Firestarter, IPTables) or the route tables. I could be easily swayed to consider the firewall option but I focused on the route tables since no new function needs to be started. My questions involve the way the route tables change and then specifics on rules. When I start the PPTP VPN the route tables change. That suggests that if the VPN drops, the table will change back, defeating my stated intent of preventing external traffic. How can I make "sticky" changes to the route table that will persist even if the VPN connection drops? Perhaps the check boxes "Ignore automatically obtained routes" or "Use this connection only for resources on it's network" (which are part of the VPN configuration options)? It would seem that, if I can force the active VPN route table to stay in effect, even when the VPN drops, that this will effectively kill any external traffic should the VPN drop. This will give me the latitude to run a routine to restart the VPN from the command line (assuming the route table rules don't prevent me re-establishing the connection). My route table, with the VPN active is (ip route list): Any comments on what 10.10.1.1 is? $ ip route list default dev ppp0 proto static 10.10.1.1 dev ppp0 proto kernel scope link src 10.10.1.11 VPN_Server_IP_Address via 192.168.1.1 dev eth0 proto static VPN_Server_IP_Address via 192.168.1.1 dev eth0 src 192.168.1.60 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.60 metric 1

  Read the article

• How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

  - by cfogelberg

  This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

  Read the article

• Tiling Problem Solutions for Various Size "Dominoes"

  - by user67081

  I've got an interesting tiling problem, I have a large square image (size 128k so 131072 squares) with dimensons 256x512... I want to fill this image with certain grain types (a 1x1 tile, a 1x2 strip, a 2x1 strip, and 2x2 square) and have no overlap, no holes, and no extension past the image boundary. Given some probability for each of these grain types, a list of the number required to be placed is generated for each. Obviously an iterative/brute force method doesn't work well here if we just randomly place the pieces, instead a certain algorithm is required. 1) all 2x2 square grains are randomly placed until exhaustion. 2) 1x2 and 2x1 grains are randomly placed alternatively until exhaustion 3) the remaining 1x1 tiles are placed to fill in all holes. It turns out this algorithm works pretty well for some cases and has no problem filling the entire image, however as you might guess, increasing the probability (and thus number) of 1x2 and 2x1 grains eventually causes the placement to stall (since there are too many holes created by the strips and not all them can be placed). My approach to this solution has been as follows: 1) Create a mini-image of size 8x8 or 16x16. 2) Fill this image randomly and following the algorithm specified above so that the desired probability of the entire image is realized in the mini-image. 3) Create N of these mini-images and then randomly successively place them in the large image. Unfortunately there are some downfalls to this simplification. 1) given the small size of the mini-images, nailing an exact probability for the entire image is not possible. Example if I want p(2x1)=P(1x2)=0.4, the mini image may only give 0.41 as the closes probability. 2) The mini-images create a pseudo boundary where no overlaps occur which isn't really descriptive of the model this is being used for. 3) There is only a fixed number of mini-images so i'm not sure how random this really is. I'm really just looking to brainstorm about possible solutions to this. My main concern is really to nail down closer probabilities, now one might suggest I just increase the mini-image size. Well I have, and it turns out that in certain cases(p(1x2)=p(2x1)=0.5) the mini-image 16x16 isn't even iteratively solvable.. So it's pretty obvious how difficult it is to randomly solve this for anything greater than 8x8 sizes.. So I'd love to hear some ideas. Thanks

  Read the article

• Is it unusual for a small company (15 developers) not to use managed source/version control?

  - by LordScree

  It's not really a technical question, but there are several other questions here about source control and best practice. The company I work for (which will remain anonymous) uses a network share to host its source code and released code. It's the responsibility of the developer or manager to manually move source code to the correct folder depending on whether it's been released and what version it is and stuff. We have various spreadsheets dotted around where we record file names and versions and what's changed, and some teams also put details of different versions at the top of each file. Each team (2-3 teams) seems to do this differently within the company. As you can imagine, it's an organised mess - organised, because the "right people" know where their stuff is, but a mess because it's all different and it relies on people remembering what to do at any one time. One good thing is that everything is backed up on a nightly basis and kept indefinitely, so if mistakes are made, snapshots can be recovered. I've been trying to push for some kind of managed source control for a while, but I can't seem to get enough support for it within the company. My main arguments are: We're currently vulnerable; at any point someone could forget to do one of the many release actions we have to do, which could mean whole versions are not stored correctly. It could take hours or even days to piece a version back together if necessary We're developing new features along with bug fixes, and often have to delay the release of one or the other because some work has not been completed yet. We also have to force customers to take versions that include new features even if they just want a bug fix, because there's only really one version we're all working on We're experiencing problems with Visual Studio because multiple developers are using the same projects at the same time (not the same files, but it's still causing problems) There are only 15 developers, but we all do stuff differently; wouldn't it be better to have a standard company-wide approach we all have to follow? My questions are: Is it normal for a group of this size not to have source control? I have so far been given only vague reasons for not having source control - what reasons would you suggest could be valid for not implementing source control, given the information above? Are there any more reasons for source control that I could add to my arsenal? I'm asking mainly to get a feel for why I have had so much resistance, so please answer honestly. I'll give the answer to the person I believe has taken the most balanced approach and has answered all three questions. Thanks in advance

  Read the article

• "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

  Read the article

• Windows scheduled task fails to complete with error code 0xc000013a

  - by Brian

  I'm using Windows Server 2003 and have a scheduled task that fails to complete. The task is set to run a Windows Command Script (.cmd) at 3pm each day. The script runs a program that extracts some data from a SQL Server database and uploads that data to an FTP server. The error code displayed in the "Last result" column of the scheduled tasks folder is 0xc000013a. A quick Google search leads to this Microsoft support page that states: The most common "C" error code is "0xC000013A: The application terminated as a result of a CTRL+C". No-one is logged in at the time the task runs, so there's no-one around to press CTRL+C. I'm not sure I understand what is being said here in the Microsoft documentation. I've checked the rudimentary things - the scheduled task is enabled, scheduled to run each day, and pointing to a file that does exist in a valid location. Interestingly, when I run this task manually (either by running the .cmd script from the command line, or by right-clicking the task and clicking "Run") the task completes successfully. What does this error code mean, and how can I get this task to run when I'm not there to force it?

  Read the article

• How to disable the RAID in x3400 M2

  - by BanKtsu

  Hi I just wanna disable the default RAID in my server IBM System X3400 M2 Server(7837-24X),i have 3 disk drives SAS. I want to make them a JBOD "Just a Bunch Of Disks", because I want to install in the drive 0 CentOS, and the other two make them cache files for a squid server. I disable the RAID in the BIOS: System Settings/Adapters and UEFI drivers/LSI Logic Fusion MPT SAS Driver -PciRoot(0x0)/Pci(0x3,0X0)/Pci(0x0,0x0) LSI Logic MPT Setup Utility RAID Properties/Delete Array Later I boot the CentOS live CD and install the OS in the drive 0, and the others 2 mounted like this: *LVM Volume Groups vg_proxyserver 139508 lv_root 51200 / ext4 lv_home 84276 /home ext4 lv_swap 4032 Hard Drive sdb(/dev/sdb) free 140011 sdc(/dev/sdc) free 140011 sdd(/dev/sdd) sdd1 500 /boot ext4 sdd2 139512 vg_proxyserver physical volume(LVM) But when I restart the server give me the error: Boot failed Hard Disk 0 UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15130,0X0)) ........PXE-E18:Server response timeout. UEFI PXE PciRoot(0x0)/Pci(0x1,0X0)/Pci(0x0,0x0)/MAC(001A64B15132,0X0)) ........PXE-E18:Server response timeout. and the OS not start. The IBM force me to do a RAID?,why?

  Read the article

• powershell v2 remoting - How do you enable unecrypted traffic

  - by Peter Walke

  I'm writing a powershell v2 script that I'd like to run against a remote server. When I run it, I get the error : Connecting to remote server failed with the following error message : The WinRM client cannot process the request. Unencrypted traffic is currently disabled in the client configuration. Change the client configurati on and try the request again. For more information, see the about_ Remote_Troubleshooting Help topic. I looked at the online help for about _ Remote_Troubleshooting, but it didn't point me towards how to enable unecrypted traffic. Below is the script that I'm using that is causing me problems. Note: I have already run Enable-PSRemoting on the remote machine to allow it to accept incoming requests. I have tried to use a session option variable, but it doesn't seem to make any difference. $key = "HKLM:\SOFTWARE\Microsoft\PowerShell\1\ShellIds" Set-ItemProperty $key ConsolePrompting True $tvar = "password" $password = ConvertTo-SecureString -string $tvar -asPlainText –force $username="domain\username" $mySessionOption = New-PSSessionOption -NoEncryption $credential = New-Object System.Management.Automation.PSCredential($username,$password) invoke-command -filepath C:\scripts\RemoteScript.ps1 -sessionoption $mySessionOption -authentication digest -credential $credential -computername RemoteServer How do I enable unencrypted traffic?

  Read the article

• Apache reverse-proxy intermittent error 113 - No route to host

  - by BonkaBonka

  I've got an Apache 2.0.52 server on CentOS 4 that front-ends a couple of App servers (mix of Jetty and Tomcat). Apache has a handful of virtual hosts configured like this: <VirtualHost www1.example.com:443> ServerName www1.example.com DocumentRoot "/mnt/app_web/html" SSLEngine on SSLCipherSuite ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP SSLCertificateFile /etc/httpd/conf/ssl.crt/server.crt SSLCertificateChainFile /etc/httpd/conf/ssl.crt/chain.crt SSLCertificateKeyFile /etc/httpd/conf/ssl.key/server.key SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0 RewriteEngine on RewriteRule ^/app1/(.*)$ http://app1.example.com:8080/app1/$1 [P,L] RewriteRule ^/app2/(.*)$ http://app2.example.com:8080/app2/$1 [P,L] </VirtualHost> However, I'm getting the following errors in the logs intermittently: [Fri Dec 04 07:19:41 2009] [error] (113)No route to host: proxy: HTTP: attempt to connect to 10.0.0.1:8080 (app1.example.com) failed I initially tried turning off IPv6, and that seemed to largely cure it, but I still have sporadic bursts of these messages. Additionally, we're running memcache on same front-end and during the times when I'm getting those messages in Apache's log, the following command doesn't work: echo stats | nc 127.0.0.1 11211 No messages are printed, but neither are the stats printed. I am completely lost as to how to proceed with troubleshooting this. =(

  Read the article

• Linux e1000e (Intel networking driver) problems galore, where do I start?

  - by Evan Carroll

  I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >