protocol buffers - Page 143

Need help trouble shooting high CPU usage by PHP-fpm

- by user432506

There is a problem that is driving me crazy. After the day I tried to fix the CPU usage problem of my VPS, the CPU load has grown from 60% to 150%, and I have no idea what causes the problem. Please help me. I had installed a copy of mediawiki on a Linode 1024. The wiki is running on Niginx + PHP-fpm + MySql. The wiki doesn't have much traffic, only around 4000 requests/day, mostly from Google and Bing bots. It had been using around 60% (of total 400% on the Linode) of the CPU before. I thought it was a bit high, so two day ago, I was trying to fix the problem (not knowing what was waiting for me). I did nothing but added a new empty line to wiki's configure file, which would change the modified time of the configure file, and then all the cached page files would be set invalidated. I had done that before, and that would cause high CPU usage, but normally it would take only hours to let things back to normal again. Not this time, my CPU usage has been around 150% for more than two days. It is php-fpm using most of CPU reassures. Using 100% of three cores is not rare. I hadn't seen that before. There are other sites on the Linode, but it should be the wiki. Because if I offline the wiki, CPU usage will drop back to around 40% soon. The day I also duplicated php-fpm.conf, and opened it, but didn't changed it. I have no idea what I did wrong. I here ask for help to save myself from being crazy!!! It is php-fpm. Is there a way to find out what is it doing? I mean like which scripts are related and what function codes are running? top: top - 06:34:33 up 10 days, 4:23, 2 users, load average: 1.10, 1.24, 1.37 Tasks: 76 total, 4 running, 72 sleeping, 0 stopped, 0 zombie Cpu(s): 61.1%us, 3.1%sy, 0.0%ni, 32.8%id, 2.9%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1028684k total, 945192k used, 83492k free, 89580k buffers Swap: 524284k total, 18084k used, 506200k free, 530380k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 26721 www-data 20 0 208m 54m 34m R 99 5.4 0:09.07 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26592 www-data 20 0 207m 45m 26m R 91 4.5 0:12.77 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26706 www-data 20 0 196m 43m 34m S 47 4.3 0:15.19 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26583 www-data 20 0 197m 45m 35m S 33 4.5 0:19.08 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26787 www-data 20 0 206m 36m 18m R 25 3.7 0:00.41 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26661 www-data 20 0 207m 46m 26m S 13 4.6 0:19.87 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 1971 mysql 20 0 155m 57m 3952 S 8 5.7 383:57.81 /usr/sbin/mysqld 242 root 20 0 0 0 0 S 1 0.0 0:51.36 [kworker/3:1] 5711 root 20 0 139m 95m 580 S 1 9.5 0:41.30 /usr/local/bin/memcached -d -u root -m 128 -p 11211 19463 root 20 0 190m 3984 1284 S 1 0.4 0:02.66 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 29100 www-data 20 0 10928 5540 820 S 1 0.5 4:49.05 nginx: worker process vmstat 30 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 16912 81456 90784 554172 0 0 4 6 3 2 11 1 87 1 0 0 16912 78036 91000 555356 0 0 38 34 1397 375 12 1 87 0 4 0 16912 31776 91528 557508 0 0 78 42 3197 487 45 1 52 1 1 0 16912 83356 91768 558576 0 0 35 56 2608 449 32 1 67 1 1 0 16912 81548 92040 559720 0 0 41 31 1243 432 8 1 91 1 2 0 16912 53056 92332 562744 0 0 105 33 2013 581 17 1 81 1 2 0 16912 73236 92552 564844 0 0 68 36 1968 615 16 1 82 1 0 0 16912 91612 92904 566676 0 0 69 35 1845 692 13 1 85 1 1 0 16912 71248 93180 568428 0 0 58 33 1952 604 15 1 82 1 1 0 16868 55952 93516 572660 1 0 144 42 1801 637 12 1 86 1 2 0 16868 48324 94416 577844 0 0 189 66 2058 702 17 1 80 2 1 0 16928 58644 94592 578184 0 2 160 49 2578 723 25 1 70 3 5 0 16928 22600 94980 580568 0 0 89 32 1496 361 13 0 85 1 0 0 16988 49256 94500 576396 0 2 41 37 1601 426 14 1 85 0 5 0 18084 24336 86032 502748 0 37 83 68 2989 562 42 1 56 0 1 0 18084 123604 86376 506996 0 0 118 41 2201 573 22 1 76 1 2 0 18084 126984 86752 508876 0 0 64 53 1620 490 13 1 85 1 2 0 18084 103104 87148 510768 0 0 71 37 2757 602 33 1 64 1

Read the article

Enterprise Manager Database Control Configuration - Recovering From Errors Due to CA Expiry on Oracle Database 10.2.0.4 or 10.2.0.5 from 31-Dec-2010 onwards

- by jayatheertha.rao(at)oracle.com

Description What is the Issue? In Enterprise Manager Database Control with Oracle Database 10.2.0.4 and 10.2.0.5, the root certificate used to secure communications via the Secure Socket Layer (SSL) protocol will expire on 31-Dec-2010 00:00:00. The certificate expiration will cause errors if you attempt to configure Database Control on or after 31-Dec-2010. Existing Database Control configurations are not affected by this issue. Likelihood of Occurrence What Versions Are Affected? The issue impacts configuration of Database Control with Oracle Database 10.2.0.4 and 10.2.0.5 only. It does not impact database creation or upgrade. The issue does not impact existing Database Control configurations. What Happens During Database Control Configuration Failure? Database Configuration Assistant (DBCA) and Database Upgrade Assistant (DBUA) Errors Database Configuration Assistant (DBCA) and Database Upgrade Assistant (DBUA) will report the following error in the console: Could not complete the Enterprise Manager configuration.Enterprise manager configuration failed due to the following error -Error starting Database Control Enterprise Manager Configuration Assistant (EMCA) Errors Enterprise Manager Configuration Assistant (EMCA) will write errors similar to those below to the emca.log file: CONFIG: Securing Database Control completed successfully .Jan 2, 2011 7:22:47 PM oracle.sysman.emcp.ParamsManager getParamCONFIG: No value was set for the parameter ORACLE_HOSTNAME.Jan 2, 2011 7:22:47 PM oracle.sysman.emcp.util.DBControlUtil startOMSINFO: Starting Database Control (this may take a while) ...Jan 2, 2011 7:22:47 PM oracle.sysman.emcp.util.PlatformInterface addEnvVarToListCONFIG: Value for env var 'ORACLE_HOSTNAME' is '', discarding the sameCONFIG: Returning env array from cacheJan 2, 2011 7:22:47 PM oracle.sysman.emcp.util.PlatformInterface executeCommandCONFIG: Starting execution: /myhost/bin/emctl start dbconsoleJan 2, 2011 7:27:26 PM oracle.sysman.emcp.util.PlatformInterface executeCommandCONFIG: Exit value of 1Jan 2, 2011 7:27:26 PM oracle.sysman.emcp.util.PlatformInterface executeCommandCONFIG: Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.https://myhost:5501/em/console/aboutApplicationStarting Oracle Enterprise Manager 10g Database Control............................................................................................. failed.------------------------------------------------------------------Logs are generated in directory /myhost/sysman/logJan 2, 2011 7:27:26 PM oracle.sysman.emcp.util.PlatformInterface executeCommandWARNING: Error executing /myhost/bin/emctl start dbconsoleJan 2, 2011 7:27:26 PM oracle.sysman.emcp.EMConfig performSEVERE: Error starting Database ControlRefer to the log file at /myhost/dbua/d4/upgrade/emConfig.log for more details.Jan 2, 2011 7:27:26 PM oracle.sysman.emcp.EMConfig performCONFIG: Stack Trace:oracle.sysman.emcp.exception.EMConfigException: Error starting Database Controlat oracle.sysman.emcp.EMDBPostConfig.performUpgrade(EMDBPostConfig.java:763)at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:232)at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:140)at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)at oracle.sysman.assistants.dbma.backend.EMConfigStep.executeStepImpl(EMConfigStep.java:104)at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:175)at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2488)at java.lang.Thread.run(Thread.java:534) The EMCA console will display output similar to the following: aime@myhost09 db_1]$ bin/emca -config dbcontrol db -repos recreate -clusterSTARTED EMCA at Jan 11, 2011 4:11:01 PMEM Configuration Assistant, Version 10.2.0.1.0 ProductionCopyright (c) 2003, 2005, Oracle. All rights reserved.Enter the following information:Database unique name: catestDatabase Control is already configured for the database catestYou have chosen to configure Database Control for managing the database catestThis will remove the existing configuration and the default settings and perform a fresh configurationDo you wish to continue? [yes(Y)/no(N)]: YListener port number: 1521Cluster name: myclusterPassword for SYS user:Password for DBSNMP user:Password for SYSMAN user:Email address for notifications (optional):Outgoing Mail (SMTP) server for notifications (optional):........Jan 11, 2011 4:18:05 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsoleINFO: Securing Database Control (this may take a while) ...Jan 11, 2011 4:19:31 PM oracle.sysman.emcp.util.DBControlUtil startOMSINFO: Starting Database Control (this may take a while) ...Jan 11, 2011 4:28:38 PM oracle.sysman.emcp.EMConfig performSEVERE: Error starting Database ControlRefer to the log file at /myhost/oracle/product/10.2.0/db_1/cfgtoollogs/emca/catest/emca_2011-01-11_04-11-01-PM.log for more details.Could not complete the configuration. Refer to the log file at /myhost/oracle/product/10.2.0/db_1/cfgtoollogs/emca/catest/emca_2011-01-11_04-11-01-PM.log for more details. At the end of the database installation on non-Windows platforms, both Database Control and the Management Agent will be up and running, even though the status of both components will be shown as not running, because EMCTL will be unable to connect to the dbconsole process. In addition, Database Control will fail to connect to the Agent. Note for Windows Platform Only:On Windows, the dbconsole process will be stopped after the failed configuration attempt. Note that the tool used to perform Database Control configuration (DBUA, DBCA or EMCA) will also wait for 15 minutes for Database Control to start, then time out. The output of the "emctl status dbconsole" command incorrectly returns the status of Database Control, as shown below: $ ./emctl status dbconsoleOracle Enterprise Manager 10g Database Control Release 10.2.0.1.0Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.https://myhost:1158/em/console/aboutApplicationOracle Enterprise Manager 10g is not running. The output of the "emctl status agent" command incorrectly returns the status of the Agent, as shownbelow: $ ./emctl status agentOracle Enterprise Manager 10g Database Control Release 10.2.0.1.0Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.---------------------------------------------------------------Agent is Not Running For Solution, refer to Note: 1222603.1 Note: 1217493.1

Read the article

Updating the managed debugging API for .NET v4

- by Brian Donahue

In any successful investigation, the right tools play a big part in collecting evidence about the state of the "crime scene" as it was before the detectives arrived. Unfortunately for the Crash Scene Investigator, we don't have the budget to fly out to the customer's site, chalk the outline, and eat their doughnuts. We have to rely on the end-user to collect the evidence for us, which means giving them the fingerprint dust and the evidence baggies and leaving them to it. With that in mind, the Red Gate support team have been writing tools that can collect vital clues with a minimum of fuss. Years ago we would have asked for a memory dump, where we used to get the customer to run CDB.exe and produce dumps that we could analyze in-house, but those dumps were pretty unwieldy (500MB files) and the debugger often didn't dump exactly where we wanted, or made five or more dumps. What we wanted was just the minimum state information from the program at the time of failure, so we produced a managed debugger that captured every first and second-chance exception and logged the stack and a minimal amount of variables from the memory of the application, which could all be exported as XML. This caused less inconvenience to the end-user because it is much easier to send a 65KB XML file in an email than a 500MB file containing all of the application's memory. We don't need to have the entire victim shipped out to us when we just want to know what was under the fingernails. The thing that made creating a managed debugging tool possible was the MDbg Engine example written by Microsoft as part of the Debugging Tools for Windows distribution. Since the ICorDebug interface is a bit difficult to understand, they had kindly created some wrappers that provided an event-driven debugging model that was perfect for our needs, but .NET 4 applications under debugging started complaining that "The debugger's protocol is incompatible with the debuggee". The introduction of .NET Framework v4 had changed the managed debugging API significantly, however, without an update for the MDbg Engine code! After a few hours of research, I had finally worked out that most of the version 4 ICorDebug interface still works much the same way in "legacy" v2 mode and there was a relatively easy fix for the problem in that you can still get a reference to legacy ICorDebug by changing the way the interface is created. In .NET v2, the interface was acquired using the CreateDebuggingInterfaceFromVersion method in mscoree.dll. In v4, you must first create IClrMetaHost, enumerate the runtimes, get an ICLRRuntimeInfo interface to the .NET 4 runtime from that, and use the GetInterface method in mscoree.dll to return a "legacy" ICorDebug interface. The rest of the MDbg Engine will continue working the old way. Here is how I had changed the MDbg Engine code to support .NET v4: private void InitFromVersion(string debuggerVersion){if( debuggerVersion.StartsWith("v1") ){throw new ArgumentException( "Can't debug a version 1 CLR process (\"" + debuggerVersion + "\"). Run application in a version 2 CLR, or use a version 1 debugger instead." );} ICorDebug rawDebuggingAPI=null;if (debuggerVersion.StartsWith("v4")){Guid CLSID_MetaHost = new Guid("9280188D-0E8E-4867-B30C-7FA83884E8DE"); Guid IID_MetaHost = new Guid("D332DB9E-B9B3-4125-8207-A14884F53216"); ICLRMetaHost metahost = (ICLRMetaHost)NativeMethods.ClrCreateInterface(CLSID_MetaHost, IID_MetaHost); IEnumUnknown runtimes = metahost.EnumerateInstalledRuntimes(); ICLRRuntimeInfo runtime = GetRuntime(runtimes, debuggerVersion); //Defined in metahost.hGuid CLSID_CLRDebuggingLegacy = new Guid(0xDF8395B5, 0xA4BA, 0x450b, 0xA7, 0x7C, 0xA9, 0xA4, 0x77, 0x62, 0xC5, 0x20);Guid IID_ICorDebug = new Guid("3D6F5F61-7538-11D3-8D5B-00104B35E7EF"); Object res;runtime.GetInterface(ref CLSID_CLRDebuggingLegacy, ref IID_ICorDebug, out res); rawDebuggingAPI = (ICorDebug)res; }elserawDebuggingAPI = NativeMethods.CreateDebuggingInterfaceFromVersion((int)CorDebuggerVersion.Whidbey,debuggerVersion);if (rawDebuggingAPI != null)InitFromICorDebug(rawDebuggingAPI);elsethrow new ArgumentException("Support for debugging version " + debuggerVersion + " is not yet implemented");} The changes above will ensure that the debugger can support .NET Framework v2 and v4 applications with the same codebase, but we do compile two different applications: one targeting v2 and the other v4. As a footnote I need to add that some missing native methods and wrappers, along with the EnumerateRuntimes method code, came from the Mindbg project on Codeplex. Another change is that when using the MDbgEngine.CreateProcess to launch a process in the debugger, do not supply a null as the final argument. This does not work any more because GetCORVersion always returns "v2.0.50727" as the function has been deprecated in .NET v4. What's worse is that on a system with only .NET 4, the user will be prompted to download and install .NET v2! Not nice! This works much better: proc = m_Debugger.CreateProcess(ProcessName, ProcessArgs, DebugModeFlag.Default,String.Format("v{0}.{1}.{2}",System.Environment.Version.Major,System.Environment.Version.Minor,System.Environment.Version.Build)); Microsoft "unofficially" plan on updating the MDbg samples soon, but if you have an MDbg-based application, you can get it working right now by changing one method a bit and adding a few new interfaces (ICLRMetaHost, IEnumUnknown, and ICLRRuntimeInfo). The new, non-legacy implementation of MDbg Engine will add new, interesting features like dump-file support and by association I assume garbage-collection/managed object stats, so it will be well worth looking into if you want to extend the functionality of a managed debugger going forward.

Read the article

Bluetooth DUN Tethering fails

- by tacone

I have an HTC Desire HD, with Android Froyo (2.2) and PDANet installed. I am using Ubuntu 10.10. I cannot tether it over Bluetooth either with Network Manager or BlueMan. (note, I installed Blueman only after failing with NetWork manager, and I even tried the last version from the PPA). With both my device is discovered, paired, setup. But connecting always fail. Network manager says it cannot get the details of my device Blueman says Connection Refused (111) Here are some relevant entries from syslog. Mar 11 22:13:00 tacone-macbook bluetoothd[2242]: Bluetooth deamon 4.69 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting SDP server Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting experimental netlink support Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to find Bluetooth netlink family Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Failed to init netlink plugin Mar 11 22:13:00 tacone-macbook kernel: [ 158.284357] Bluetooth: L2CAP ver 2.14 Mar 11 22:13:00 tacone-macbook kernel: [ 158.284361] Bluetooth: L2CAP socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.446781] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Mar 11 22:13:00 tacone-macbook kernel: [ 158.446784] Bluetooth: BNEP filters: protocol multicast Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 registered Mar 11 22:13:00 tacone-macbook kernel: [ 158.569481] Bluetooth: SCO (Voice Link) ver 0.6 Mar 11 22:13:00 tacone-macbook kernel: [ 158.569484] Bluetooth: SCO socket layer initialized Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: HCI dev 0 up Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Starting security manager 0 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: ioctl(HCIUNBLOCKADDR): Invalid argument (22) Mar 11 22:13:00 tacone-macbook kernel: [ 158.818600] Bluetooth: RFCOMM TTY layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818607] Bluetooth: RFCOMM socket layer initialized Mar 11 22:13:00 tacone-macbook kernel: [ 158.818610] Bluetooth: RFCOMM ver 1.11 Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: Adapter /org/bluez/2242/hci0 has been enabled Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from ListDevices reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:13:00 tacone-macbook NetworkManager[1247]: <warn> bluez error getting adapter properties: Rejected send message, 1 matched rules; type="method_call", sender=":1.4" (uid=0 pid=1247 comm="NetworkManager) interface="org.bluez.Adapter" member="GetProperties" error name="(unset)" requested_reply=0 destination="org.bluez" (uid=0 pid=2242 comm="/usr/sbin/bluetoothd)) Mar 11 22:13:00 tacone-macbook bluetoothd[2243]: return_link_keys (sba=00:23:6C:B5:03:6F, dba=00:23:6C:C0:F1:B0) Mar 11 22:13:00 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:02 tacone-macbook bluetoothd[2243]: Discovery session 0x2262d7c0 with :1.45 activated Mar 11 22:15:15 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:15 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:16 tacone-macbook bluetoothd[2243]: io_capa_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:17 tacone-macbook bluetoothd[2243]: io_capa_response (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:18 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_notify (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE, type=5) Mar 11 22:15:28 tacone-macbook kernel: [ 306.585725] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.630757] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: Authentication requested Mar 11 22:15:28 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:15:28 tacone-macbook kernel: [ 306.784829] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:28 tacone-macbook kernel: [ 306.857861] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: probe failed with driver input-headset for device /org/bluez/2242/hci0/dev_F8_DB_7F_AF_6B_EE Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: bluetooth-util.c: Error from GetProperties reply: org.freedesktop.DBus.Error.AccessDenied Mar 11 22:15:29 tacone-macbook pulseaudio[1757]: last message repeated 8 times Mar 11 22:15:29 tacone-macbook bluetoothd[2243]: Stopping discovery Mar 11 22:15:30 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:30 tacone-macbook modem-manager: (rfcomm0): probe requested by plugin 'Generic' Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:15:43 tacone-macbook modem-manager: (rfcomm0) opening serial device... Mar 11 22:15:49 tacone-macbook modem-manager: (rfcomm0) closing serial device... Mar 11 22:16:15 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Mar 11 22:16:19 tacone-macbook kernel: [ 357.375108] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.169506] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.215529] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook bluetoothd[2243]: link_key_request (sba=00:23:6C:B5:03:6F, dba=F8:DB:7F:AF:6B:EE) Mar 11 22:16:24 tacone-macbook kernel: [ 362.281559] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook kernel: [ 362.330588] l2cap_recv_acldata: Unexpected continuation frame (len 0) Mar 11 22:16:24 tacone-macbook modem-manager: (tty/rfcomm0): could not get port's parent device Any help ? PS: tethering via USB or WiFi is not an option, I need to do it over Bluetooth.

Read the article

L2TP connection fails!

- by a.toraby

I've installed l2tp-ipsec-vpn but when I try to connect to the vpn server I get error 500. Here are the logs: Jun 17 12:54:37.449 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:54:38.858 Stopping xl2tpd: xl2tpd. Jun 17 12:54:38.859 xl2tpd[1511]: death_handler: Fatal signal 15 received Jun 17 12:54:38.872 ipsec_setup: Starting Openswan IPsec U2.6.37/K3.2.0-23-generic... Jun 17 12:54:39.027 ipsec__plutorun: Starting Pluto subsystem... Jun 17 12:54:39.033 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Jun 17 12:54:39.037 recvref[30]: Protocol not available Jun 17 12:54:39.038 xl2tpd[2442]: This binary does not support kernel L2TP. Jun 17 12:54:39.038 xl2tpd[2444]: xl2tpd version xl2tpd-1.3.1 started on atp-ThinkPad-SL410 PID:2444 Jun 17 12:54:39.038 xl2tpd[2444]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. Jun 17 12:54:39.038 xl2tpd[2444]: Forked by Scott Balmos and David Stipp, (C) 2001 Jun 17 12:54:39.038 xl2tpd[2444]: Inherited by Jeff McAdams, (C) 2002 Jun 17 12:54:39.039 xl2tpd[2444]: Forked again by Xelerance (www.xelerance.com) (C) 2006 Jun 17 12:54:39.039 xl2tpd[2444]: Listening on IP address 0.0.0.0, port 1701 Jun 17 12:54:39.040 Starting xl2tpd: xl2tpd. Jun 17 12:54:39.062 ipsec__plutorun: 002 added connection description "L2TP" Jun 17 12:55:30.753 104 "L2TP" #1: STATE_MAIN_I1: initiate Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 20s for response Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 40s for response Jun 17 12:55:30.754 003 "L2TP" #1: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008] Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [RFC 3947] method set to=109 Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 109 Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [FRAGMENTATION] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [MS-Negotiation Discovery Capable] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [IKE CGA version 1] Jun 17 12:55:30.755 106 "L2TP" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Jun 17 12:55:30.755 010 "L2TP" #1: STATE_MAIN_I2: retransmission; will wait 20s for response Jun 17 12:55:30.755 003 "L2TP" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Jun 17 12:55:30.755 108 "L2TP" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Jun 17 12:55:30.756 004 "L2TP" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Jun 17 12:55:30.756 117 "L2TP" #2: STATE_QUICK_I1: initiate Jun 17 12:55:30.756 010 "L2TP" #2: STATE_QUICK_I1: retransmission; will wait 20s for response Jun 17 12:55:30.756 003 "L2TP" #2: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME msgid=6b03ff69 Jun 17 12:55:30.756 003 "L2TP" #2: NAT-Traversal: received 2 NAT-OA. ignored because peer is not NATed Jun 17 12:55:30.756 003 "L2TP" #2: our client subnet returned doesn't match my proposal - us:192.168.1.3/32 vs them:109.162.174.235/32 Jun 17 12:55:30.757 003 "L2TP" #2: Allowing questionable proposal anyway [ALLOW_MICROSOFT_BAD_PROPOSAL] Jun 17 12:55:30.757 004 "L2TP" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x23af21f8 <0xdb4a87b6 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Jun 17 12:55:31.759 xl2tpd[2444]: Connecting to host x.x.x.x, port 1701 Jun 17 12:55:32.021 xl2tpd[2444]: Connection established to x.x.x.x, 1701. Local: 4720, Remote: 200 (ref=0/0). Jun 17 12:55:32.023 xl2tpd[2444]: Calling on tunnel 4720 Jun 17 12:55:32.454 xl2tpd[2444]: Call established with x.x.x.x, Local: 9667, Remote: 3, Serial: 1 (ref=0/0) Jun 17 12:55:32.456 xl2tpd[2444]: start_pppd: I'm running: Jun 17 12:55:32.456 xl2tpd[2444]: "/usr/sbin/pppd" Jun 17 12:55:32.457 xl2tpd[2444]: "passive" Jun 17 12:55:32.458 xl2tpd[2444]: "nodetach" Jun 17 12:55:32.458 xl2tpd[2444]: ":" Jun 17 12:55:32.459 xl2tpd[2444]: "file" Jun 17 12:55:32.459 xl2tpd[2444]: "/etc/ppp/L2TP.options.xl2tpd" Jun 17 12:55:32.460 xl2tpd[2444]: "ipparam" Jun 17 12:55:32.461 xl2tpd[2444]: "x.x.x.x" Jun 17 12:55:32.462 xl2tpd[2444]: "/dev/pts/1" Jun 17 12:55:32.583 pppd[2711]: Plugin passprompt.so loaded. Jun 17 12:55:32.583 pppd[2711]: pppd 2.4.5 started by root, uid 0 Jun 17 12:55:32.619 pppd[2711]: Using interface ppp0 Jun 17 12:55:32.620 pppd[2711]: Connect: ppp0 <--> /dev/pts/1 Jun 17 12:55:33.693 pppd[2711]: /usr/bin/L2tpIPsecVpn exited with code 0 Jun 17 12:55:34.454 [ERROR 404] Authentication failed: closing connection to 'L2TP' Jun 17 12:55:34.456 pppd[2711]: MS-CHAP authentication failed: E=691 Authentication failure Jun 17 12:55:34.457 pppd[2711]: CHAP authentication failed Jun 17 12:55:34.461 Stopping xl2tpd: xl2tpd. Jun 17 12:55:34.462 xl2tpd[2444]: death_handler: Fatal signal 15 received Jun 17 12:55:34.463 pppd[2711]: Modem hangup Jun 17 12:55:34.463 pppd[2711]: Connection terminated. Jun 17 12:55:34.474 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:55:34.482 pppd[2711]: Exit. Jun 17 12:55:35.587 ipsec_setup: ERROR: Module xfrm4_mode_transport is in use Jun 17 12:55:35.665 ipsec_setup: ERROR: Module esp4 is in use I had this problem by ubuntu 11.10 though I can easily connect to the server from windows. I use ubuntu 12.0 64bit

Read the article

Cant correctly install Lazarus

- by user206316

I have a little problem with installing and running Lazarus. I just upgrade ubuntu from 13.04 to 13.10. When i had 13.04, i could install lazarus without any problems, but in 13.10 lazarus magicaly dissapeared, and when i tried install it from ubuntu software center, it said something like in my software resources lazarus-ide-0.9.30.4 doesnt exist. After some research on net i tried delete all files from earlier installations, download deb packages from sourceforge and install them, but when i want to instal fpc-src, error shows up with output: (Reading database ... 100% (Reading database ... 239063 files and directories currently installed.) Unpacking fpc-src (from .../Stiahnut/Lazarus/fpc-src.deb) ... dpkg: error processing /home/richi/Stiahnut/Lazarus/fpc-src.deb (--install): trying to overwrite '/usr/share/fpcsrc/2.6.2/rtl/nativent/tthread.inc', which is also in package fpc-source-2.6.2 2.6.2-5 dpkg-deb (subprocess): decompressing archive member: internal gzip write error: Broken pipe dpkg-deb: error: subprocess <decompress> returned error exit status 2 dpkg-deb (subprocess): cannot copy archive member from '/home/richi/Stiahnut/Lazarus/fpc-src.deb' to decompressor pipe: failed to write (Broken pipe) when i started lazarus, it of course tell me that it cant find fpc compier and fpc sources. So, please, i really need program for school and i dont wanna reinstall os anymore or something like that :( (Ubuntu 13.10 64bit) P.S: im not skilled in linux so if u know some commands to fix it just write them for copy and paste :) P.P.S:Sorry for bad English, im Slovak xD P.P.P.S: Thank so much for any answers update: output from sudo dpkg -l | grep "^rc" richi@Richi-Ubuntu:~/lazarus1.0.12$ sudo dpkg -l | grep "^rc" rc account-plugin-generic-oauth 0.10bzr13.03.26-0ubuntu1.1 amd64 GNOME Control Center account plugin for single signon - generic OAuth rc appmenu-gtk:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc appmenu-gtk3:amd64 12.10.3daily13.04.03-0ubuntu1 amd64 Export GTK menus over DBus rc fp-compiler-2.6.0 2.6.0-9 amd64 Free Pascal - compiler rc fp-utils-2.6.0 2.6.0-9 amd64 Free Pascal - utilities rc lazarus-ide-0.9.30.4 0.9.30.4-4 amd64 IDE for Free Pascal - common IDE files rc lazarus-ide-1.0.10 1.0.10+dfsg-1 amd64 IDE for Free Pascal - common IDE files rc lcl-utils-0.9.30.4 0.9.30.4-4 amd64 Lazarus Components Library - command line build tools rc lcl-utils-1.0.10 1.0.10+dfsg-1 amd64 Lazarus Components Library - command line build tools rc libbamf3-1:amd64 0.4.0daily13.06.19~13.04-0ubuntu1 amd64 Window matching library - shared library rc libboost-filesystem1.49.0 1.49.0-4 amd64 filesystem operations (portable paths, iteration over directories, etc) in C++ rc libboost-signals1.49.0 1.49.0-4 amd64 managed signals and slots library for C++ rc libboost-system1.49.0 1.49.0-4 amd64 Operating system (e.g. diagnostics support) library rc libboost-thread1.49.0 1.49.0-4 amd64 portable C++ multi-threading rc libbrlapi0.5:amd64 4.4-8ubuntu4 amd64 braille display access via BRLTTY - shared library rc libcamel-1.2-40 3.6.4-0ubuntu1.1 amd64 Evolution MIME message handling library rc libcolumbus0-0 0.4.0daily13.04.16~13.04-0ubuntu1 amd64 error tolerant matching engine - shared library rc libdns95 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 DNS Shared Library used by BIND rc libdvbpsi7 0.2.2-1 amd64 library for MPEG TS and DVB PSI tables decoding and generating rc libebackend-1.2-5 3.6.4-0ubuntu1.1 amd64 Utility library for evolution data servers rc libedata-book-1.2-15 3.6.4-0ubuntu1.1 amd64 Backend library for evolution address books rc libedata-cal-1.2-18 3.6.4-0ubuntu1.1 amd64 Backend library for evolution calendars rc libgc1c3:amd64 1:7.2d-0ubuntu5 amd64 conservative garbage collector for C and C++ rc libgd2-xpm:amd64 2.0.36~rc1~dfsg-6.1ubuntu1 amd64 GD Graphics Library version 2 rc libgd2-xpm:i386 2.0.36~rc1~dfsg-6.1ubuntu1 i386 GD Graphics Library version 2 rc libgnome-desktop-3-4 3.6.3-0ubuntu1 amd64 Utility library for loading .desktop files - runtime files rc libgphoto2-2:amd64 2.4.14-2 amd64 gphoto2 digital camera library rc libgphoto2-2:i386 2.4.14-2 i386 gphoto2 digital camera library rc libgphoto2-port0:amd64 2.4.14-2 amd64 gphoto2 digital camera port library rc libgphoto2-port0:i386 2.4.14-2 i386 gphoto2 digital camera port library rc libgtksourceview-3.0-0:amd64 3.6.3-0ubuntu1 amd64 shared libraries for the GTK+ syntax highlighting widget rc libgweather-3-1 3.6.2-0ubuntu1 amd64 GWeather shared library rc libharfbuzz0:amd64 0.9.13-1 amd64 OpenType text shaping engine rc libibus-1.0-0:amd64 1.4.2-0ubuntu2 amd64 Intelligent Input Bus - shared library rc libical0 0.48-2 amd64 iCalendar library implementation in C (runtime) rc libimobiledevice3 1.1.4-1ubuntu6.2 amd64 Library for communicating with the iPhone and iPod Touch rc libisc92 1:9.9.2.dfsg.P1-2ubuntu2.1 amd64 ISC Shared Library used by BIND rc libkms1:amd64 2.4.46-1 amd64 Userspace interface to kernel DRM buffer management rc libllvm3.2:i386 1:3.2repack-7ubuntu1 i386 Low-Level Virtual Machine (LLVM), runtime library rc libmikmod2:amd64 3.1.12-5 amd64 Portable sound library rc libpackagekit-glib2-14:amd64 0.7.6-3ubuntu1 amd64 Library for accessing PackageKit using GLib rc libpoppler28:amd64 0.20.5-1ubuntu3 amd64 PDF rendering library rc libraw5:amd64 0.14.7-0ubuntu1.13.04.2 amd64 raw image decoder library rc librhythmbox-core6 2.98-0ubuntu5 amd64 support library for the rhythmbox music player rc libsdl-mixer1.2:amd64 1.2.12-7ubuntu1 amd64 Mixer library for Simple DirectMedia Layer 1.2, libraries rc libsnmp15 5.4.3~dfsg-2.7ubuntu1 amd64 SNMP (Simple Network Management Protocol) library rc libsyncdaemon-1.0-1 4.2.0-0ubuntu1 amd64 Ubuntu One synchronization daemon library rc libunity-core-6.0-5 7.0.0daily13.06.19~13.04-0ubuntu1 amd64 Core library for the Unity interface. rc libusb-0.1-4:i386 2:0.1.12-23.2ubuntu1 i386 userspace USB programming library rc libwayland0:amd64 1.0.5-0ubuntu1 amd64 wayland compositor infrastructure - shared libraries rc linux-image-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-19-generic 3.8.0-19.30 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc linux-image-extra-3.8.0-31-generic 3.8.0-31.46 amd64 Linux kernel image for version 3.8.0 on 64 bit x86 SMP rc screen-resolution-extra 0.15ubuntu1 all Extension for the GNOME screen resolution applet rc unity-common 7.0.0daily13.06.19~13.04-0ubuntu1 all Common files for the Unity interface.

Read the article

Integrate BING API for Search inside ASP.Net web application

- by sreejukg

As you might already know, Bing is the Microsoft Search engine and is getting popular day by day. Bing offers APIs that can be integrated into your website to increase your website functionality. At this moment, there are two important APIs available. They are Bing Search API Bing Maps The Search API enables you to build applications that utilize Bing’s technology. The API allows you to search multiple source types such as web; images, video etc. and supports various output prototypes such as JSON, XML, and SOAP. Also you will be able to customize the search results as you wish for your public facing website. Bing Maps API allows you to build robust applications that use Bing Maps. In this article I am going to describe, how you can integrate Bing search into your website. In order to start using Bing, First you need to sign in to http://www.bing.com/toolbox/bingdeveloper/ using your windows live credentials. Click on the Sign in button, you will be asked to enter your windows live credentials. Once signed in you will be redirected to the Developer page. Here you can create applications and get AppID for each application. Since I am a first time user, I don’t have any applications added. Click on the Add button to add a new application. You will be asked to enter certain details about your application. The fields are straight forward, only thing you need to note is the website field, here you need to enter the website address from where you are going to use this application, and this field is optional too. Of course you need to agree on the terms and conditions and then click Save. Once you click on save, the application will be created and application ID will be available for your use. Now we got the APP Id. Basically Bing supports three protocols. They are JSON, XML and SOAP. JSON is useful if you want to call the search requests directly from the browser and use JavaScript to parse the results, thus JSON is the favorite choice for AJAX application. XML is the alternative for applications that does not support SOAP, e.g. flash/ Silverlight etc. SOAP is ideal for strongly typed languages and gives a request/response object model. In this article I am going to demonstrate how to search BING API using SOAP protocol from an ASP.Net application. For the purpose of this demonstration, I am going to create an ASP.Net project and implement the search functionality in an aspx page. Open Visual Studio, navigate to File-> New Project, select ASP.Net empty web application, I named the project as “BingSearchSample”. Add a Search.aspx page to the project, once added the solution explorer will looks similar to the following. Now you need to add a web reference to the SOAP service available from Bing. To do this, from the solution explorer, right click your project, select Add Service Reference. Now the new service reference dialog will appear. In the left bottom of the dialog, you can find advanced button, click on it. Now the service reference settings dialog will appear. In the bottom left, you can find Add Web Reference button, click on it. The add web reference dialog will appear now. Enter the URL as http://api.bing.net/search.wsdl?AppID=<YourAppIDHere>&version=2.2 (replace <yourAppIDHere> with the appID you have generated previously) and click on the button next to it. This will find the web service methods available. You can change the namespace suggested by Bing, but for the purpose of this demonstration I have accepted all the default settings. Click on the Add reference button once you are done. Now the web reference to Search service will be added your project. You can find this under solution explorer of your project. Now in the Search.aspx, that you previously created, place one textbox, button and a grid view. For the purpose of this demonstration, I have given the identifiers (ID) as txtSearch, btnSearch, gvSearch respectively. The idea is to search the text entered in the text box using Bing service and show the results in the grid view. In the design view, the search.aspx looks as follows. In the search.aspx.cs page, add a using statement that points to net.bing.api. I have added the following code for button click event handler. The code is very straight forward. It just calls the service with your AppID, a query to search and a source for searching. Let us run this page and see the output when I enter Microsoft in my textbox. If you want to search a specific site, you can include the site name in the query parameter. For e.g. the following query will search the word Microsoft from www.microsoft.com website. searchRequest.Query = “site:www.microsoft.com Microsoft”; The output of this query is as follows. Integrating BING search API to your website is easy and there is no limit on the customization of the interface you can do. There is no Bing branding required so I believe this is a great option for web developers when they plan for site search.

Read the article

Record and Play your WebLogic Console Tasks Like a DVR

- by james.bayer

Automation using WebLogic Scripting Tool Today on the Oracle internal mailing list for WebLogic Server questions someone asked how to automate the configuration of the thread model for WebLogic Server and they were having trouble with the jython scripting syntax. I’ve previously written about this feature called Work Managers and the associated constraints. However, I did not show how to automate the process of configuring this without the console using WebLogic Scripting Tool – the jython scripting automation environment abbreviated as WLST. I’ve written some very basic introductions to WLST before and there is also an Oracle By Example on the subject, but this is a bit more advanced. Fear not because there is a really easy-to-use feature of the WLS console that lets you “Record” user actions just like a DVR. Using these recordings of the web-based console, you can easily create a script even if you are unfamiliar with the WLST syntax and API. I’m a big fan of both DVR’s and automation as can be evidenced with this old Halloween picture taken during simpler times. Obviously the Cast Away and The Big Labowski references show some age. I was a big Tivo fan-boy back in the day and I still think it’s the best DVR. I strongly believe that WebLogic Scripting Tool (WLST) is an absolutely essential tool for automating administration tasks in anything beyond a development environment. Even in development environments you can make a case that it makes sense to start the automation for environments downstream. I promise you that once you start using it for any tasks that you do even semi-regularly, you won’t go back to clicking through the console. It’s simply so much more efficient and less error-prone to run a script. Let’s say you need to create a Work Manager and MaxThreadsConstraint – the easy way to do it is configure it in the WLS console first while capturing the commands with a recording. See the images for the simple steps – click to enlarge. Record Console Configurations to a File Review the Recordings and Make Slight Modifications In order to make the recorded .py file directly callable as a stand-alone script I added calls to the connect() and edit() functions at the beginning and calls to disconnect() and exit() at the end – otherwise the main section of the script was provided by the console recording. Below is the resulting file I saved as d:/temp/wm.py connect('weblogic','welcome1', 't3://localhost:7001') edit() startEdit() cd('/SelfTuning/wl_server') cmo.createMaxThreadsConstraint('MaxThreadsConstraint-0') cd('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName)) cmo.setCount(5) cmo.unSet('ConnectionPoolName') cd('/SelfTuning/wl_server') cmo.createWorkManager('WorkManager-0') cd('/SelfTuning/wl_server/WorkManagers/WorkManager-0') set('Targets',jarray.array([ObjectName('com.bea:Name=examplesServer,Type=Server')], ObjectName)) cmo.setMaxThreadsConstraint(getMBean('/SelfTuning/wl_server/MaxThreadsConstraints/MaxThreadsConstraint-0')) cmo.setIgnoreStuckThreads(false) activate() disconnect() exit() Run the Script If you want to test it be sure to delete the Work Manager and MaxThreadConstraint that you had previously created in the console. Do something like the following - set up the environment and tell WLST to execute the script which happens in the first 2 lines, the rest doesn’t require any user input: D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server\bin>setDomainEnv.cmd D:\Oracle\wls11g\wlserver_10.3\samples\domains\wl_server>java weblogic.WLST d:\temp\wm.py Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'examplesServer' that belongs to domain 'wl_server'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. Location changed to edit tree. This is a writable tree with DomainMBean as the root. To make changes you will need to start an edit session via startEdit(). For more help, use help(edit) Starting an edit session ... Started edit session, please be sure to save and activate your changes once you are done. Activating all your changes, this may take a while ... The edit lock associated with this edit session is released once the activation is completed. Activation completed Disconnected from weblogic server: examplesServer Exiting WebLogic Scripting Tool. Now if you go back and look in the console the changes have been made and we now have a compete script. Of course there is a full MBean reference and you can learn the nuances of jython and WLST, but why not the WLS console do most of the work for you! Happy scripting.

Read the article

Sun Fire X4800 M2 Delivers World Record TPC-C for x86 Systems

- by Brian

Oracle's Sun Fire X4800 M2 server equipped with eight 2.4 GHz Intel Xeon Processor E7-8870 chips obtained a result of 5,055,888 tpmC on the TPC-C benchmark. This result is a world record for x86 servers. Oracle demonstrated this world record database performance running Oracle Database 11g Release 2 Enterprise Edition with Partitioning. The Sun Fire X4800 M2 server delivered a new x86 TPC-C world record of 5,055,888 tpmC with a price performance of $0.89/tpmC using Oracle Database 11g Release 2. This configuration is available 06/26/12. The Sun Fire X4800 M2 server delivers 3.0x times better performance than the next 8-processor result, an IBM System p 570 equipped with POWER6 processors. The Sun Fire X4800 M2 server has 3.1x times better price/performance than the 8-processor 4.7GHz POWER6 IBM System p 570. The Sun Fire X4800 M2 server has 1.6x times better performance than the 4-processor IBM x3850 X5 system equipped with Intel Xeon processors. This is the first TPC-C result on any system using eight Intel Xeon Processor E7-8800 Series chips. The Sun Fire X4800 M2 server is the first x86 system to get over 5 million tpmC. The Oracle solution utilized Oracle Linux operating system and Oracle Database 11g Enterprise Edition Release 2 with Partitioning to produce the x86 world record TPC-C benchmark performance. Performance Landscape Select TPC-C results (sorted by tpmC, bigger is better) System p/c/t tpmC Price/tpmC Avail Database MemorySize Sun Fire X4800 M2 8/80/160 5,055,888 0.89 USD 6/26/2012 Oracle 11g R2 4 TB IBM x3850 X5 4/40/80 3,014,684 0.59 USD 7/11/2011 DB2 ESE 9.7 3 TB IBM x3850 X5 4/32/64 2,308,099 0.60 USD 5/20/2011 DB2 ESE 9.7 1.5 TB IBM System p 570 8/16/32 1,616,162 3.54 USD 11/21/2007 DB2 9.0 2 TB p/c/t - processors, cores, threads Avail - availability date Oracle and IBM TPC-C Response times System tpmC Response Time (sec) New Order 90th% Response Time (sec) New Order Average Sun Fire X4800 M2 5,055,888 0.210 0.166 IBM x3850 X5 3,014,684 0.500 0.272 Ratios - Oracle Better 1.6x 1.4x 1.3x Oracle uses average new order response time for comparison between Oracle and IBM. Graphs of Oracle's and IBM's response times for New-Order can be found in the full disclosure reports on TPC's website TPC-C Official Result Page. Configuration Summary and Results Hardware Configuration: Server Sun Fire X4800 M2 server 8 x 2.4 GHz Intel Xeon Processor E7-8870 4 TB memory 8 x 300 GB 10K RPM SAS internal disks 8 x Dual port 8 Gbs FC HBA Data Storage 10 x Sun Fire X4270 M2 servers configured as COMSTAR heads, each with 1 x 3.06 GHz Intel Xeon X5675 processor 8 GB memory 10 x 2 TB 7.2K RPM 3.5" SAS disks 2 x Sun Storage F5100 Flash Array storage (1.92 TB each) 1 x Brocade 5300 switches Redo Storage 2 x Sun Fire X4270 M2 servers configured as COMSTAR heads, each with 1 x 3.06 GHz Intel Xeon X5675 processor 8 GB memory 11 x 2 TB 7.2K RPM 3.5" SAS disks Clients 8 x Sun Fire X4170 M2 servers, each with 2 x 3.06 GHz Intel Xeon X5675 processors 48 GB memory 2 x 300 GB 10K RPM SAS disks Software Configuration: Oracle Linux (Sun Fire 4800 M2) Oracle Solaris 11 Express (COMSTAR for Sun Fire X4270 M2) Oracle Solaris 10 9/10 (Sun Fire X4170 M2) Oracle Database 11g Release 2 Enterprise Edition with Partitioning Oracle iPlanet Web Server 7.0 U5 Tuxedo CFS-R Tier 1 Results: System: Sun Fire X4800 M2 tpmC: 5,055,888 Price/tpmC: 0.89 USD Available: 6/26/2012 Database: Oracle Database 11g Cluster: no New Order Average Response: 0.166 seconds Benchmark Description TPC-C is an OLTP system benchmark. It simulates a complete environment where a population of terminal operators executes transactions against a database. The benchmark is centered around the principal activities (transactions) of an order-entry environment. These transactions include entering and delivering orders, recording payments, checking the status of orders, and monitoring the level of stock at the warehouses. Key Points and Best Practices Oracle Database 11g Release 2 Enterprise Edition with Partitioning scales easily to this high level of performance. COMSTAR (Common Multiprotocol SCSI Target) is the software framework that enables an Oracle Solaris host to serve as a SCSI Target platform. COMSTAR uses a modular approach to break the huge task of handling all the different pieces in a SCSI target subsystem into independent functional modules which are glued together by the SCSI Target Mode Framework (STMF). The modules implementing functionality at SCSI level (disk, tape, medium changer etc.) are not required to know about the underlying transport. And the modules implementing the transport protocol (FC, iSCSI, etc.) are not aware of the SCSI-level functionality of the packets they are transporting. The framework hides the details of allocation providing execution context and cleanup of SCSI commands and associated resources and simplifies the task of writing the SCSI or transport modules. Oracle iPlanet Web Server middleware is used for the client tier of the benchmark. Each web server instance supports more than a quarter-million users while satisfying the response time requirement from the TPC-C benchmark. See Also Oracle Press Release -- Sun Fire X4800 M2 TPC-C Executive Summary tpc.org Complete Sun Fire X4800 M2 TPC-C Full Disclosure Report tpc.org Transaction Processing Performance Council (TPC) Home Page Ideas International Benchmark Page Sun Fire X4800 M2 Server oracle.com OTN Oracle Linux oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Sun Storage F5100 Flash Array oracle.com OTN Disclosure Statement TPC Benchmark C, tpmC, and TPC-C are trademarks of the Transaction Processing Performance Council (TPC). Sun Fire X4800 M2 (8/80/160) with Oracle Database 11g Release 2 Enterprise Edition with Partitioning, 5,055,888 tpmC, $0.89 USD/tpmC, available 6/26/2012. IBM x3850 X5 (4/40/80) with DB2 ESE 9.7, 3,014,684 tpmC, $0.59 USD/tpmC, available 7/11/2011. IBM x3850 X5 (4/32/64) with DB2 ESE 9.7, 2,308,099 tpmC, $0.60 USD/tpmC, available 5/20/2011. IBM System p 570 (8/16/32) with DB2 9.0, 1,616,162 tpmC, $3.54 USD/tpmC, available 11/21/2007. Source: http://www.tpc.org/tpcc, results as of 7/15/2011.

Read the article

NoSQL Memcached API for MySQL: Latest Updates

- by Mat Keep

With data volumes exploding, it is vital to be able to ingest and query data at high speed. For this reason, MySQL has implemented NoSQL interfaces directly to the InnoDB and MySQL Cluster (NDB) storage engines, which bypass the SQL layer completely. Without SQL parsing and optimization, Key-Value data can be written directly to MySQL tables up to 9x faster, while maintaining ACID guarantees. In addition, users can continue to run complex queries with SQL across the same data set, providing real-time analytics to the business or anonymizing sensitive data before loading to big data platforms such as Hadoop, while still maintaining all of the advantages of their existing relational database infrastructure. This and more is discussed in the latest Guide to MySQL and NoSQL where you can learn more about using the APIs to scale new generations of web, cloud, mobile and social applications on the world's most widely deployed open source database The native Memcached API is part of the MySQL 5.6 Release Candidate, and is already available in the GA release of MySQL Cluster. By using the ubiquitous Memcached API for writing and reading data, developers can preserve their investments in Memcached infrastructure by re-using existing Memcached clients, while also eliminating the need for application changes. Speed, when combined with flexibility, is essential in the world of growing data volumes and variability. Complementing NoSQL access, support for on-line DDL (Data Definition Language) operations in MySQL 5.6 and MySQL Cluster enables DevOps teams to dynamically update their database schema to accommodate rapidly changing requirements, such as the need to capture additional data generated by their applications. These changes can be made without database downtime. Using the Memcached interface, developers do not need to define a schema at all when using MySQL Cluster. Lets look a little more closely at the Memcached implementations for both InnoDB and MySQL Cluster. Memcached Implementation for InnoDB The Memcached API for InnoDB is previewed as part of the MySQL 5.6 Release Candidate. As illustrated in the following figure, Memcached for InnoDB is implemented via a Memcached daemon plug-in to the mysqld process, with the Memcached protocol mapped to the native InnoDB API. Figure 1: Memcached API Implementation for InnoDB With the Memcached daemon running in the same process space, users get very low latency access to their data while also leveraging the scalability enhancements delivered with InnoDB and a simple deployment and management model. Multiple web / application servers can remotely access the Memcached / InnoDB server to get direct access to a shared data set. With simultaneous SQL access, users can maintain all the advanced functionality offered by InnoDB including support for Foreign Keys, XA transactions and complex JOIN operations. Benchmarks demonstrate that the NoSQL Memcached API for InnoDB delivers up to 9x higher performance than the SQL interface when inserting new key/value pairs, with a single low-end commodity server supporting nearly 70,000 Transactions per Second. Figure 2: Over 9x Faster INSERT Operations The delivered performance demonstrates MySQL with the native Memcached NoSQL interface is well suited for high-speed inserts with the added assurance of transactional guarantees. You can check out the latest Memcached / InnoDB developments and benchmarks here You can learn how to configure the Memcached API for InnoDB here Memcached Implementation for MySQL Cluster Memcached API support for MySQL Cluster was introduced with General Availability (GA) of the 7.2 release, and joins an extensive range of NoSQL interfaces that are already available for MySQL Cluster Like Memcached, MySQL Cluster provides a distributed hash table with in-memory performance. MySQL Cluster extends Memcached functionality by adding support for write-intensive workloads, a full relational model with ACID compliance (including persistence), rich query support, auto-sharding and 99.999% availability, with extensive management and monitoring capabilities. All writes are committed directly to MySQL Cluster, eliminating cache invalidation and the overhead of data consistency checking to ensure complete synchronization between the database and cache. Figure 3: Memcached API Implementation with MySQL Cluster Implementation is simple: 1. The application sends reads and writes to the Memcached process (using the standard Memcached API). 2. This invokes the Memcached Driver for NDB (which is part of the same process) 3. The NDB API is called, providing for very quick access to the data held in MySQL Cluster’s data nodes. The solution has been designed to be very flexible, allowing the application architect to find a configuration that best fits their needs. It is possible to co-locate the Memcached API in either the data nodes or application nodes, or alternatively within a dedicated Memcached layer. The benefit of this flexible approach to deployment is that users can configure behavior on a per-key-prefix basis (through tables in MySQL Cluster) and the application doesn’t have to care – it just uses the Memcached API and relies on the software to store data in the right place(s) and to keep everything synchronized. Using Memcached for Schema-less Data By default, every Key / Value is written to the same table with each Key / Value pair stored in a single row – thus allowing schema-less data storage. Alternatively, the developer can define a key-prefix so that each value is linked to a pre-defined column in a specific table. Of course if the application needs to access the same data through SQL then developers can map key prefixes to existing table columns, enabling Memcached access to schema-structured data already stored in MySQL Cluster. Conclusion Download the Guide to MySQL and NoSQL to learn more about NoSQL APIs and how you can use them to scale new generations of web, cloud, mobile and social applications on the world's most widely deployed open source database See how to build a social app with MySQL Cluster and the Memcached API from our on-demand webinar or take a look at the docs Don't hesitate to use the comments section below for any questions you may have

Read the article

Running Jetty under Windows Azure Using RoleEntryPoint in a Worker Role

- by Shawn Cicoria

This post is built upon the work of Mario Kosmiskas and David C. Chou’s prior postings – from here: http://blogs.msdn.com/b/mariok/archive/2011/01/05/deploying-java-applications-in-azure.aspx http://blogs.msdn.com/b/dachou/archive/2010/03/21/run-java-with-jetty-in-windows-azure.aspx As Mario points out in his post, when you need to have more control over the process that starts, it generally is better left to a RoleEntryPoint capability that as of now, requires the use of a CLR based assembly that is deployed as part of the package to Azure. There were things I liked especially about Mario’s post – specifically, the ability to pull down the JRE and Jetty runtimes at role startup and instantiate the process using the extracted bits. The way Mario initialized the java process (and Jetty) was to take advantage of a role startup task configured as part of the service definition. This is a great quick way to kick off processes or tasks prior to your role entry point. However, if you need access to service configuration values or role events, that’s where RoleEntryPoint comes in. For this PoC sample I moved the logic for retrieving the bits for the jre and jetty to the worker roles OnStart – in addition to moving the process kickoff to the OnStart method. The Run method at this point is there to loop and just report the status of the java process. Beyond just making things more parameterized, both Mario’s and David’s articles still form the essence of the approach. The solution that accompanies this post provides all the necessary .NET based Visual Studio project. In addition, you’ll need: 1. Jetty 7 runtime http://www.eclipse.org/jetty/downloads.php 2. JRE http://www.oracle.com/technetwork/java/javase/downloads/index.html Once you have these the first step is to create archives (zips) of the distributions. For this PoC, the structure of the archive requires that the root of the archive looks as follows: JRE6.zip jetty---.zip Upload the contents to a storage container (block blob), and for this example I used /archives as the location. The service configuration has several settings that allow, which is the advantage of using RoleEntryPoint, the ability to provide these things via native configuration support from Azure in a worker role. Storage Explorer You can use development storage for testing this out – the zipped version of the solution is configured for development storage. When you’re ready to deploy, you update the two settings – 1 for diagnostics and the other for the storage container where the /archives are going to be stored. <?xml version="1.0" encoding="utf-8"?> <ServiceConfiguration serviceName="HostedJetty" osFamily="2" osVersion="*"> <Role name="JettyWorker"> <Instances count="1" /> <ConfigurationSettings>  <Setting name="Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString" value="UseDevelopmentStorage=true" /> <Setting name="JettyArchive" value="jetty-distribution-7.3.0.v20110203b.zip" /> <Setting name="StartRole" value="true" /> <Setting name="BlobContainer" value="archives" /> <Setting name="JreArchive" value="jre6.zip" />  <Setting name="StorageCredentials" value="UseDevelopmentStorage=true" /> For interacting with Storage you can use several tools – one tool that I like is from the Windows Azure CAT team located here: http://appfabriccat.com/2011/02/exploring-windows-azure-storage-apis-by-building-a-storage-explorer-application/ and shown in the prior picture At runtime, during role initialization and startup, Azure will call into your RoleEntryPoint. At that time the code will do a dynamic pull of the 2 archives and extract – using the Sharp Zip Lib <link> as Mario had demonstrated in his sample. The only different here is the use of CLR code vs. PowerShell (which is really CLR, but that’s another discussion). At this point, once the 2 zips are extracted, the Role’s file system looks as follows: Worker Role approot From there, the OnStart method (which also does the download and unzip using a simple StorageHelper class) kicks off the Java path and now you have Java! Task Manager Jetty Sample Page A couple of things I’m working on to enhance this is to extract the jre and jetty bits not to the appRoot but to a resource location defined as part of the service definition. ServiceDefinition.csdef <?xml version="1.0" encoding="utf-8"?> <ServiceDefinition name="HostedJetty" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition"> <WorkerRole name="JettyWorker"> <Imports> <Import moduleName="Diagnostics" /> <Import moduleName="RemoteAccess" /> <Import moduleName="RemoteForwarder" /> </Imports> <Endpoints> <InputEndpoint name="JettyPort" protocol="tcp" port="80" localPort="8080" /> </Endpoints> <LocalResources> <LocalStorage name="Archives" cleanOnRoleRecycle="false" sizeInMB="100" /> </LocalResources> As the concept matures a bit, being able to update dynamically the content or jar files as part of a running java solution is something that is possible through continued enhancement of this simple model. The Visual Studio 2010 Solution is located here: HostingJavaSln_NDA.zip

Read the article

NET Math Libraries

- by JoshReuben

NET Mathematical Libraries .NET Builder for Matlab The MathWorks Inc. - http://www.mathworks.com/products/netbuilder/ MATLAB Builder NE generates MATLAB based .NET and COM components royalty-free deployment creates the components by encrypting MATLAB functions and generating either a .NET or COM wrapper around them. .NET/Link for Mathematica www.wolfram.com a product that 2-way integrates Mathematica and Microsoft's .NET platform call .NET from Mathematica - use arbitrary .NET types directly from the Mathematica language. use and control the Mathematica kernel from a .NET program. turns Mathematica into a scripting shell to leverage the computational services of Mathematica. write custom front ends for Mathematica or use Mathematica as a computational engine for another program comes with full source code. Leverages MathLink - a Wolfram Research's protocol for sending data and commands back and forth between Mathematica and other programs. .NET/Link abstracts the low-level details of the MathLink C API. Extreme Optimization http://www.extremeoptimization.com/ a collection of general-purpose mathematical and statistical classes built for the.NET framework. It combines a math library, a vector and matrix library, and a statistics library in one package. download the trial of version 4.0 to try it out. Multi-core ready - Full support for Task Parallel Library features including cancellation. Broad base of algorithms covering a wide range of numerical techniques, including: linear algebra (BLAS and LAPACK routines), numerical analysis (integration and differentiation), equation solvers. Mathematics leverages parallelism using .NET 4.0's Task Parallel Library. Basic math: Complex numbers, 'special functions' like Gamma and Bessel functions, numerical differentiation. Solving equations: Solve equations in one variable, or solve systems of linear or nonlinear equations. Curve fitting: Linear and nonlinear curve fitting, cubic splines, polynomials, orthogonal polynomials. Optimization: find the minimum or maximum of a function in one or more variables, linear programming and mixed integer programming. Numerical integration: Compute integrals over finite or infinite intervals, over 2D and higher dimensional regions. Integrate systems of ordinary differential equations (ODE's). Fast Fourier Transforms: 1D and 2D FFT's using managed or fast native code (32 and 64 bit) BigInteger, BigRational, and BigFloat: Perform operations with arbitrary precision. Vector and Matrix Library Real and complex vectors and matrices. Single and double precision for elements. Structured matrix types: including triangular, symmetrical and band matrices. Sparse matrices. Matrix factorizations: LU decomposition, QR decomposition, singular value decomposition, Cholesky decomposition, eigenvalue decomposition. Portability and performance: Calculations can be done in 100% managed code, or in hand-optimized processor-specific native code (32 and 64 bit). Statistics Data manipulation: Sort and filter data, process missing values, remove outliers, etc. Supports .NET data binding. Statistical Models: Simple, multiple, nonlinear, logistic, Poisson regression. Generalized Linear Models. One and two-way ANOVA. Hypothesis Tests: 12 14 hypothesis tests, including the z-test, t-test, F-test, runs test, and more advanced tests, such as the Anderson-Darling test for normality, one and two-sample Kolmogorov-Smirnov test, and Levene's test for homogeneity of variances. Multivariate Statistics: K-means cluster analysis, hierarchical cluster analysis, principal component analysis (PCA), multivariate probability distributions. Statistical Distributions: 25 29 continuous and discrete statistical distributions, including uniform, Poisson, normal, lognormal, Weibull and Gumbel (extreme value) distributions. Random numbers: Random variates from any distribution, 4 high-quality random number generators, low discrepancy sequences, shufflers. New in version 4.0 (November, 2010) Support for .NET Framework Version 4.0 and Visual Studio 2010 TPL Parallellized – multicore ready sparse linear program solver - can solve problems with more than 1 million variables. Mixed integer linear programming using a branch and bound algorithm. special functions: hypergeometric, Riemann zeta, elliptic integrals, Frensel functions, Dawson's integral. Full set of window functions for FFT's. Product Price Update subscription Single Developer License $999 $399 Team License (3 developers) $1999 $799 Department License (8 developers) $3999 $1599 Site License (Unlimited developers in one physical location) $7999 $3199 NMath http://www.centerspace.net .NET math and statistics libraries matrix and vector classes random number generators Fast Fourier Transforms (FFTs) numerical integration linear programming linear regression curve and surface fitting optimization hypothesis tests analysis of variance (ANOVA) probability distributions principal component analysis cluster analysis built on the Intel Math Kernel Library (MKL), which contains highly-optimized, extensively-threaded versions of BLAS (Basic Linear Algebra Subroutines) and LAPACK (Linear Algebra PACKage). Product Price Update subscription Single Developer License $1295 $388 Team License (5 developers) $5180 $1554 DotNumerics http://www.dotnumerics.com/NumericalLibraries/Default.aspx free DotNumerics is a website dedicated to numerical computing for .NET that includes a C# Numerical Library for .NET containing algorithms for Linear Algebra, Differential Equations and Optimization problems. The Linear Algebra library includes CSLapack, CSBlas and CSEispack, ports from Fortran to C# of LAPACK, BLAS and EISPACK, respectively. Linear Algebra (CSLapack, CSBlas and CSEispack). Systems of linear equations, eigenvalue problems, least-squares solutions of linear systems and singular value problems. Differential Equations. Initial-value problem for nonstiff and stiff ordinary differential equations ODEs (explicit Runge-Kutta, implicit Runge-Kutta, Gear's BDF and Adams-Moulton). Optimization. Unconstrained and bounded constrained optimization of multivariate functions (L-BFGS-B, Truncated Newton and Simplex methods). Math.NET Numerics http://numerics.mathdotnet.com/ free an open source numerical library - includes special functions, linear algebra, probability models, random numbers, interpolation, integral transforms. A merger of dnAnalytics with Math.NET Iridium in addition to a purely managed implementation will also support native hardware optimization. constants & special functions complex type support real and complex, dense and sparse linear algebra (with LU, QR, eigenvalues, ... decompositions) non-uniform probability distributions, multivariate distributions, sample generation alternative uniform random number generators descriptive statistics, including order statistics various interpolation methods, including barycentric approaches and splines numerical function integration (quadrature) routines integral transforms, like fourier transform (FFT) with arbitrary lengths support, and hartley spectral-space aware sequence manipulation (signal processing) combinatorics, polynomials, quaternions, basic number theory. parallelized where appropriate, to leverage multi-core and multi-processor systems fully managed or (if available) using native libraries (Intel MKL, ACMS, CUDA, FFTW) provides a native facade for F# developers

Read the article

Connection Pooling is Busted

- by MightyZot

A few weeks ago we started getting complaints about performance in an application that has performed very well for many years. The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database. Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc. (PaperWise is a document management and workflow system.) A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler. All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero. After getting nowhere with SQL Profiler, the situation was escalated to me. I decided to take a peek with Process Monitor. Procmon revealed some “gaps” in the TCP/IP traffic. There were notable delays between send and receive pairs. The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send. You might expect some delay because, presumably, the application is doing some thinking in-between the pairs. But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed. Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms. Not only that, but connections to a file share containing images were taking 2 seconds! So, I asked about a trust. Sure enough there was a trust between two domains and the file share was on the second domain. Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share. Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets. TDS is the protocol that SQL Server uses to communicate. There is a certificate exchange and some SSL that occurs during authentication. All of this was evident in the network traffic. After staring at the network traffic for a while, and examining packets, I decided to call it a night. On the way home that night, something about the traffic kept nagging at me. Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well. Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port. After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports. SQL Server would execute a single query and respond on a port, then open a new port and execute the next query. Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis. Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop. Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection. After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors. Server-side cursors are the default, by the way. Voila! After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away. Believe it or not, this is actually documented by Microsoft, and rather difficult to find. (At least it was while we were trying to troubleshoot the problem!) So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor. If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries. I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries. In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two. Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem. Maybe they can explain to us why this is appropriate behavior. :)

Read the article

What is the most efficient way to convert to binary and back in C#?

- by Saad Imran.

I'm trying to write a general purpose socket server for a game I'm working on. I know I could very well use already built servers like SmartFox and Photon, but I wan't to go through the pain of creating one myself for learning purposes. I've come up with a BSON inspired protocol to convert the the basic data types, their arrays, and a special GSObject to binary and arrange them in a way so that it can be put back together into object form on the client end. At the core, the conversion methods utilize the .Net BitConverter class to convert the basic data types to binary. Anyways, the problem is performance, if I loop 50,000 times and convert my GSObject to binary each time it takes about 5500ms (the resulting byte[] is just 192 bytes per conversion). I think think this would be way too slow for an MMO that sends 5-10 position updates per second with a 1000 concurrent users. Yes, I know it's unlikely that a game will have a 1000 users on at the same time, but like I said earlier this is supposed to be a learning process for me, I want to go out of my way and build something that scales well and can handle at least a few thousand users. So yea, if anyone's aware of other conversion techniques or sees where I'm loosing performance I would appreciate the help. GSBitConverter.cs This is the main conversion class, it adds extension methods to main datatypes to convert to the binary format. It uses the BitConverter class to convert the base types. I've shown only the code to convert integer and integer arrays, but the rest of the method are pretty much replicas of those two, they just overload the type. public static class GSBitConverter { public static byte[] ToGSBinary(this short value) { return BitConverter.GetBytes(value); } public static byte[] ToGSBinary(this IEnumerable<short> value) { List<byte> bytes = new List<byte>(); short length = (short)value.Count(); bytes.AddRange(length.ToGSBinary()); for (int i = 0; i < length; i++) bytes.AddRange(value.ElementAt(i).ToGSBinary()); return bytes.ToArray(); } public static byte[] ToGSBinary(this bool value); public static byte[] ToGSBinary(this IEnumerable<bool> value); public static byte[] ToGSBinary(this IEnumerable<byte> value); public static byte[] ToGSBinary(this int value); public static byte[] ToGSBinary(this IEnumerable<int> value); public static byte[] ToGSBinary(this long value); public static byte[] ToGSBinary(this IEnumerable<long> value); public static byte[] ToGSBinary(this float value); public static byte[] ToGSBinary(this IEnumerable<float> value); public static byte[] ToGSBinary(this double value); public static byte[] ToGSBinary(this IEnumerable<double> value); public static byte[] ToGSBinary(this string value); public static byte[] ToGSBinary(this IEnumerable<string> value); public static string GetHexDump(this IEnumerable<byte> value); } Program.cs Here's the the object that I'm converting to binary in a loop. class Program { static void Main(string[] args) { GSObject obj = new GSObject(); obj.AttachShort("smallInt", 15); obj.AttachInt("medInt", 120700); obj.AttachLong("bigInt", 10900800700); obj.AttachDouble("doubleVal", Math.PI); obj.AttachStringArray("muppetNames", new string[] { "Kermit", "Fozzy", "Piggy", "Animal", "Gonzo" }); GSObject apple = new GSObject(); apple.AttachString("name", "Apple"); apple.AttachString("color", "red"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)1.5); GSObject lemon = new GSObject(); apple.AttachString("name", "Lemon"); apple.AttachString("color", "yellow"); apple.AttachBool("inStock", false); apple.AttachFloat("price", (float)0.8); GSObject apricoat = new GSObject(); apple.AttachString("name", "Apricoat"); apple.AttachString("color", "orange"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)1.9); GSObject kiwi = new GSObject(); apple.AttachString("name", "Kiwi"); apple.AttachString("color", "green"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)2.3); GSArray fruits = new GSArray(); fruits.AddGSObject(apple); fruits.AddGSObject(lemon); fruits.AddGSObject(apricoat); fruits.AddGSObject(kiwi); obj.AttachGSArray("fruits", fruits); Stopwatch w1 = Stopwatch.StartNew(); for (int i = 0; i < 50000; i++) { byte[] b = obj.ToGSBinary(); } w1.Stop(); Console.WriteLine(BitConverter.IsLittleEndian ? "Little Endian" : "Big Endian"); Console.WriteLine(w1.ElapsedMilliseconds + "ms"); } Here's the code for some of my other classes that are used in the code above. Most of it is repetitive. GSObject GSArray GSWrappedObject

Read the article

How to propagate http response code from back-end to client

- by Manoj Neelapu

Oracle service bus can be used as for pass through casses. Some use cases require propagating the http-response code back to the caller. http://forums.oracle.com/forums/thread.jspa?messageID=4326052&#4326052 is one such example we will try to accomplish in this tutorial.We will try to demonstrate this feature using Oracle Service Bus (11.1.1.3.0. We will also use commons-logging-1.1.1, httpcomponents-client-4.0.1, httpcomponents-core-4.0.1 for writing the client to demonstrate.First we create a simple JSP which will always set response code to 304.The JSP snippet will look like <%@ page language="java" contentType="text/xml; charset=UTF-8" pageEncoding="UTF-8" %><% System.out.println("Servlet setting Responsecode=304"); response.setStatus(304); response.flushBuffer();%>We will now deploy this JSP on weblogic server with URI=http://localhost:7021/reponsecode/For this JSP we will create a simple Any XML BS We will also create proxy service as shown below Once the proxy is created we configure pipeline for the proxy to use route node, which invokes the BS(JSPCaller) created in the first place. So now we will create a error handler for route node and will add a stage. When a HTTP BS sends a request, the JSP sends the response back. If the response code is not 200, then the http BS will consider that as error and the above configured error handler is invoked. We will print $outbound to show the response code sent by the JSP. The next actions. To test this I had create a simple clientimport org.apache.http.Header;import org.apache.http.HttpEntity;import org.apache.http.HttpHost;import org.apache.http.HttpResponse;import org.apache.http.HttpVersion;import org.apache.http.client.methods.HttpGet;import org.apache.http.conn.ClientConnectionManager;import org.apache.http.conn.scheme.PlainSocketFactory;import org.apache.http.conn.scheme.Scheme;import org.apache.http.conn.scheme.SchemeRegistry;import org.apache.http.impl.client.DefaultHttpClient;import org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager;import org.apache.http.params.BasicHttpParams;import org.apache.http.params.HttpParams;import org.apache.http.params.HttpProtocolParams;import org.apache.http.util.EntityUtils;/** * @author MNEELAPU * */public class TestProxy304{ public static void main(String arg[]) throws Exception{ HttpHost target = new HttpHost("localhost", 7021, "http"); // general setup SchemeRegistry supportedSchemes = new SchemeRegistry(); // Register the "http" protocol scheme, it is required // by the default operator to look up socket factories. supportedSchemes.register(new Scheme("http", PlainSocketFactory.getSocketFactory(), 7021)); // prepare parameters HttpParams params = new BasicHttpParams(); HttpProtocolParams.setVersion(params, HttpVersion.HTTP_1_1); HttpProtocolParams.setContentCharset(params, "UTF-8"); HttpProtocolParams.setUseExpectContinue(params, true); ClientConnectionManager connMgr = new ThreadSafeClientConnManager(params, supportedSchemes); DefaultHttpClient httpclient = new DefaultHttpClient(connMgr, params); HttpGet req = new HttpGet("/HttpResponseCode/ProxyExposed"); System.out.println("executing request to " + target); HttpResponse rsp = httpclient.execute(target, req); HttpEntity entity = rsp.getEntity(); System.out.println("----------------------------------------"); System.out.println(rsp.getStatusLine()); Header[] headers = rsp.getAllHeaders(); for (int i = 0; i < headers.length; i++) { System.out.println(headers[i]); } System.out.println("----------------------------------------"); if (entity != null) { System.out.println(EntityUtils.toString(entity)); } // When HttpClient instance is no longer needed, // shut down the connection manager to ensure // immediate deallocation of all system resources httpclient.getConnectionManager().shutdown(); }}On compiling and executing this we see the below output in STDOUT which clearly indicates the response code was propagated from Business Service to Proxy serviceexecuting request to http://localhost:7021----------------------------------------HTTP/1.1 304 Not ModifiedDate: Tue, 08 Jun 2010 16:13:42 GMTContent-Type: text/xml; charset=UTF-8X-Powered-By: Servlet/2.5 JSP/2.1----------------------------------------

Read the article

OpenVPN on Ubuntu 11.10 - unable to redirect default gateway

- by Vladimir Kadalashvili

I'm trying to connect to connect to OpenVPN server from my Ubuntu 11.10 machine. I use the following command to do it (under root user): openvpn --config /home/vladimir/client.ovpn Everything seems to be OK, it connects normally without any warnings and errors, but when I try to browse the internet I see that I still use my own IP address, so VPN connection doesn't work. When I run openvpn command, it displays the following message among others: NOTE: unable to redirect default gateway -- Cannot read current default gateway from system I think it's the cause of this problem, but unfortunately I don't know how to fix it. Below is full output of openvpn command: Sat Jun 9 23:51:36 2012 OpenVPN 2.2.0 x86_64-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [eurephia] [MH] [PF_INET6] [IPv6 payload 20110424-2 (2.2RC2)] built on Jul 4 2011 Sat Jun 9 23:51:36 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sat Jun 9 23:51:36 2012 Control Channel Authentication: tls-auth using INLINE static key file Sat Jun 9 23:51:36 2012 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:36 2012 LZO compression initialized Sat Jun 9 23:51:36 2012 Control Channel MTU parms [ L:1542 D:166 EF:66 EB:0 ET:0 EL:0 ] Sat Jun 9 23:51:36 2012 Socket Buffers: R=[126976->200000] S=[126976->200000] Sat Jun 9 23:51:36 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sat Jun 9 23:51:36 2012 Local Options hash (VER=V4): '504e774e' Sat Jun 9 23:51:36 2012 Expected Remote Options hash (VER=V4): '14168603' Sat Jun 9 23:51:36 2012 UDPv4 link local: [undef] Sat Jun 9 23:51:36 2012 UDPv4 link remote: [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:37 2012 TLS: Initial packet from [AF_INET]94.229.78.130:1194, sid=13fd921b b42072ab Sat Jun 9 23:51:37 2012 VERIFY OK: depth=1, /CN=OpenVPN_CA Sat Jun 9 23:51:37 2012 VERIFY OK: nsCertType=SERVER Sat Jun 9 23:51:37 2012 VERIFY OK: depth=0, /CN=OpenVPN_Server Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sat Jun 9 23:51:38 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sat Jun 9 23:51:38 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sat Jun 9 23:51:38 2012 [OpenVPN_Server] Peer Connection Initiated with [AF_INET]94.229.78.130:1194 Sat Jun 9 23:51:40 2012 SENT CONTROL [OpenVPN_Server]: 'PUSH_REQUEST' (status=1) Sat Jun 9 23:51:40 2012 PUSH: Received control message: 'PUSH_REPLY,explicit-exit-notify,topology subnet,route-delay 5 30,dhcp-pre-release,dhcp-renew,dhcp-release,route-metric 101,ping 5,ping-restart 40,redirect-gateway def1,redirect-gateway bypass-dhcp,redirect-gateway autolocal,route-gateway 5.5.0.1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.4.4,register-dns,comp-lzo yes,ifconfig 5.5.117.43 255.255.0.0' Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:4: dhcp-pre-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:5: dhcp-renew (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:6: dhcp-release (2.2.0) Sat Jun 9 23:51:40 2012 Unrecognized option or missing parameter(s) in [PUSH-OPTIONS]:16: register-dns (2.2.0) Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: timers and/or timeouts modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: explicit notify parm(s) modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: LZO parms modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ifconfig/up options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: route-related options modified Sat Jun 9 23:51:40 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sat Jun 9 23:51:40 2012 ROUTE: default_gateway=UNDEF Sat Jun 9 23:51:40 2012 TUN/TAP device tun0 opened Sat Jun 9 23:51:40 2012 TUN/TAP TX queue length set to 100 Sat Jun 9 23:51:40 2012 do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0 Sat Jun 9 23:51:40 2012 /sbin/ifconfig tun0 5.5.117.43 netmask 255.255.0.0 mtu 1500 broadcast 5.5.255.255 Sat Jun 9 23:51:45 2012 NOTE: unable to redirect default gateway -- Cannot read current default gateway from system Sat Jun 9 23:51:45 2012 Initialization Sequence Completed Output of route command: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default * 0.0.0.0 U 0 0 0 ppp0 5.5.0.0 * 255.255.0.0 U 0 0 0 tun0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.0.0 * 255.255.255.0 U 0 0 0 wlan0 stream-ts1.net. * 255.255.255.255 UH 0 0 0 ppp0 Output of ifconfig command: eth0 Link encap:Ethernet HWaddr 6c:62:6d:44:0d:12 inet6 addr: fe80::6e62:6dff:fe44:d12/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:54594 errors:0 dropped:0 overruns:0 frame:0 TX packets:59897 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:44922107 (44.9 MB) TX bytes:8839969 (8.8 MB) Interrupt:41 Base address:0x8000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4561 errors:0 dropped:0 overruns:0 frame:0 TX packets:4561 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:685425 (685.4 KB) TX bytes:685425 (685.4 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:213.206.63.44 P-t-P:213.206.34.4 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:53577 errors:0 dropped:0 overruns:0 frame:0 TX packets:58892 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:43667387 (43.6 MB) TX bytes:7504776 (7.5 MB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:5.5.117.43 P-t-P:5.5.117.43 Mask:255.255.0.0 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:27:19:f6:b5:cf inet addr:192.168.0.1 Bcast:0.0.0.0 Mask:255.255.255.0 inet6 addr: fe80::227:19ff:fef6:b5cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12079 errors:0 dropped:0 overruns:0 frame:0 TX packets:11178 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1483691 (1.4 MB) TX bytes:4307899 (4.3 MB) So my question is - how to make OpenVPN redirect default gateway? Thanks!

Read the article

Adding UCM as a search source in Windows Explorer

- by kyle.hatlestad

A customer recently pointed out to me that Windows 7 supports federated search within Windows Explorer. This means you can perform searches to external sources such as Google, Flickr, YouTube, etc right from within Explorer. While we do have the Desktop Integration Suite which offers searching within Explorer, I thought it would be interesting to look into this method which would not require any client software to implement. Basically, federated searching hooks up in Windows Explorer through the OpenSearch protocol. A Search Connector Descriptor file is run and it installs the search provider. The file is a .osdx file which is an OpenSearch Description document. It describes the search provider you are hooking up to along with the URL for the query. If those results can come back as an RSS or ATOM feed, then you're all set. So the first step is to install the RSS Feeds component from the UCM Samples page on OTN. If you're on 11g, I've found the RSS Feeds works just fine on that version too. Next, you want to perform a Quick Search with a particular search term and then copy the RSS link address for that search result. Here is what an example URL might looks like: http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&feedName=search_results&QueryText=%28+%3cqsch%3eoracle%3c%2fqsch %3e+%29&SortField=dInDate&SortOrder=Desc&ResultCount=20&SearchQueryFormat= Universal&SearchProviders=server& Now you want to create a new text file and start out with this information: <?xml version="1.0" encoding="UTF-8"?><OpenSearchDescription xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName></ShortName> <Description></Description> <Url type="application/rss+xml" template=""/> <Url type="text/html" template=""/> </OpenSearchDescription> Enter a ShortName and Description. The ShortName will be the value used when displaying the search provider in Explorer. In the template attribute for the first Url element, enter the URL copied previously. You will then need to convert the ampersand symbols to '&' to make them XML compliant. Finally, you'll want to switch out the search term with '{searchTerms}'. For the second Url element, you can do the same thing except you want to copy the UCM search results URL from the page of results. That URL will look something like: http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&SortField=dInDate&SortOrder=Desc&ResultCount=20&QueryText=%3Cqsch%3Eoracle%3C%2Fqsch%3E&listTemplateId= &ftx=1&SearchQueryFormat=Universal&TargetedQuickSearchSelection= &MiniSearchText=oracle Again, convert the ampersand symbols and replace the search term with '{searchTerms}'. When complete, save the file with the .osdx extension. The completed file should look like: <?xml version="1.0" encoding="UTF-8"?> <OpenSearchDescription xmlns="http://a9.com/-/spec/opensearch/1.1/" xmlns:ms-ose="http://schemas.microsoft.com/opensearchext/2009/"> <ShortName>Universal Content Management</ShortName> <Description>OpenSearch for UCM via Windows 7 Search Federation.</Description> <Url type="application/rss+xml" template="http://server:16200/cs/idcplg?IdcService=GET_SCS_FEED&feedName=search_results&QueryText=%28+%3Cqsch%3E{searchTerms}%3C%2fqsch%3E+%29&SortField=dInDate&SortOrder=Desc&ResultCount=200&SearchQueryFormat=Universal"/> <Url type="text/html" template="http://server:16200/cs/idcplg?IdcService=GET_SEARCH_RESULTS&SortField=dInDate&SortOrder=Desc&ResultCount=20&QueryText=%3Cqsch%3E{searchTerms}%3C%2Fqsch%3E&listTemplateId=&ftx=1&SearchQueryFormat=Universal&TargetedQuickSearchSelection=&MiniSearchText={searchTerms}"/> </OpenSearchDescription> After you save the file, simply double-click it to create the provider. It will ask if you want to add the search connector to Windows. Click Add and it will add it to the Searches folder in your user folder as well as your Favorites. Now just click on the search icon and in the upper right search box, enter your term. As you are typing, it begins executing searches and the results will come back in Explorer. Now when you double-click on an item, it will try and download the web viewable for viewing. You also have the ability to save the search, just as you would in UCM. And there is a link to Search On Website which will launch your browser and go directly to the search results page there. And with some tweaks to the RSS component, you can make the results a bit more interesting. It supports the Media RSS standard, so you can pass along the thumbnail of the documents in the results. To enable this, edit the rss_resources.htm file in the RSS Feeds component. In the std_rss_feed_begin resource include, add the namespace 'xmlns:media="http://search.yahoo.com/mrss/' to the rss definition: <rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:sy="http://purl.org/rss/1.0/modules/syndication/" xmlns:media="http://search.yahoo.com/mrss/"> Next, in the rss_channel_item_with_thumb include, below the closing image element, add this element: </images> <media:thumbnail url="<$if strIndexOf(thumbnailUrl, "@t") > 0 or strIndexOf(thumbnailUrl, "@g") > 0 or strIndexOf(thumbnailUrl, "@p") > 0$><$rssHttpHost$><$thumbnailUrl$><$elseif dGif$><$HttpWebRoot$>images/docgifs/<$dGif$><$endif$>" /> <description> This and lots of other tweaks can be done to the RSS component to help extend it for optimum use in Explorer. Hopefully this can get you started. *Note: This post also applies to Universal Records Management (URM).

Read the article

Lync Server 2010

- by ManojDhobale

Microsoft Lync Server 2010 communications software and its client software, such as Microsoft Lync 2010, enable your users to connect in new ways and to stay connected, regardless of their physical location. Lync 2010 and Lync Server 2010 bring together the different ways that people communicate in a single client interface, are deployed as a unified platform, and are administered through a single management infrastructure. Workload Description IM and presence Instant messaging (IM) and presence help your users find and communicate with one another efficiently and effectively. IM provides an instant messaging platform with conversation history, and supports public IM connectivity with users of public IM networks such as MSN/Windows Live, Yahoo!, and AOL. Presence establishes and displays a user’s personal availability and willingness to communicate through the use of common states such as Available or Busy. This rich presence information enables other users to immediately make effective communication choices. Conferencing Lync Server includes support for IM conferencing, audio conferencing, web conferencing, video conferencing, and application sharing, for both scheduled and impromptu meetings. All these meeting types are supported with a single client. Lync Server also supports dial-in conferencing so that users of public switched telephone network (PSTN) phones can participate in the audio portion of conferences. Conferences can seamlessly change and grow in real time. For example, a single conference can start as just instant messages between a few users, and escalate to an audio conference with desktop sharing and a larger audience instantly, easily, and without interrupting the conversation flow. Enterprise Voice Enterprise Voice is the Voice over Internet Protocol (VoIP) offering in Lync Server 2010. It delivers a voice option to enhance or replace traditional private branch exchange (PBX) systems. In addition to the complete telephony capabilities of an IP PBX, Enterprise Voice is integrated with rich presence, IM, collaboration, and meetings. Features such as call answer, hold, resume, transfer, forward and divert are supported directly, while personalized speed dialing keys are replaced by Contacts lists, and automatic intercom is replaced with IM. Enterprise Voice supports high availability through call admission control (CAC), branch office survivability, and extended options for data resiliency. Support for remote users You can provide full Lync Server functionality for users who are currently outside your organization’s firewalls by deploying servers called Edge Servers to provide a connection for these remote users. These remote users can connect to conferences by using a personal computer with Lync 2010 installed, the phone, or a web interface. Deploying Edge Servers also enables you to federate with partner or vendor organizations. A federated relationship enables your users to put federated users on their Contacts lists, exchange presence information and instant messages with these users, and invite them to audio calls, video calls, and conferences. Integration with other products Lync Server integrates with several other products to provide additional benefits to your users and administrators. Meeting tools are integrated into Outlook 2010 to enable organizers to schedule a meeting or start an impromptu conference with a single click and make it just as easy for attendees to join. Presence information is integrated into Outlook 2010 and SharePoint 2010. Exchange Unified Messaging (UM) provides several integration features. Users can see if they have new voice mail within Lync 2010. They can click a play button in the Outlook message to hear the audio voice mail, or view a transcription of the voice mail in the notification message. Simple deployment To help you plan and deploy your servers and clients, Lync Server provides the Microsoft Lync Server 2010, Planning Tool and the Topology Builder. Lync Server 2010, Planning Tool is a wizard that interactively asks you a series of questions about your organization, the Lync Server features you want to enable, and your capacity planning needs. Then, it creates a recommended deployment topology based on your answers, and produces several forms of output to aid your planning and installation. Topology Builder is an installation component of Lync Server 2010. You use Topology Builder to create, adjust and publish your planned topology. It also validates your topology before you begin server installations. When you install Lync Server on individual servers, the installation program deploys the server as directed in the topology. Simple management After you deploy Lync Server, it offers the following powerful and streamlined management tools: Active Directory for its user information, which eliminates the need for separate user and policy databases. Microsoft Lync Server 2010 Control Panel, a new web-based graphical user interface for administrators. With this web-based UI, Lync Server administrators can manage their systems from anywhere on the corporate network, without needing specialized management software installed on their computers. Lync Server Management Shell command-line management tool, which is based on the Windows PowerShell command-line interface. It provides a rich command set for administration of all aspects of the product, and enables Lync Server administrators to automate repetitive tasks using a familiar tool. While the IM and presence features are automatically installed in every Lync Server deployment, you can choose whether to deploy conferencing, Enterprise Voice, and remote user access, to tailor your deployment to your organization’s needs.

Read the article

WebLogic Server JMS WLST Script – Who is Connected To My Server

- by james.bayer

Ever want to know who was connected to your WebLogic Server instance for troubleshooting? An email exchange about this topic and JMS came up this week, and I’ve heard it come up once or twice before too. Sometimes it’s interesting or helpful to know the list of JMS clients (IP Addresses, JMS Destinations, message counts) that are connected to a particular JMS server. This can be helpful for troubleshooting. Tom Barnes from the WebLogic Server JMS team provided some helpful advice: The JMS connection runtime mbean has “getHostAddress”, which returns the host address of the connecting client JVM as a string. A connection runtime can contain session runtimes, which in turn can contain consumer runtimes. The consumer runtime, in turn has a “getDestinationName” and “getMemberDestinationName”. I think that this means you could write a WLST script, for example, to dump all consumers, their destinations, plus their parent session’s parent connection’s host addresses. Note that the client runtime mbeans (connection, session, and consumer) won’t necessarily be hosted on the same JVM as a destination that’s in the same cluster (client messages route from their connection host to their ultimate destination in the same cluster). Writing the Script So armed with this information, I decided to take the challenge and see if I could write a WLST script to do this. It’s always helpful to have the WebLogic Server MBean Reference handy for activities like this. This one is focused on JMS Consumers and I only took a subset of the information available, but it could be modified easily to do Producers. I haven’t tried this on a more complex environment, but it works in my simple sandbox case, so it should give you the general idea. # Better to use Secure Config File approach for login as shown here http://buttso.blogspot.com/2011/02/using-secure-config-files-with-weblogic.html connect('weblogic','welcome1','t3://localhost:7001') # Navigate to the Server Runtime and get the Server Name serverRuntime() serverName = cmo.getName() # Multiple JMS Servers could be hosted by a single WLS server cd('JMSRuntime/' + serverName + '.jms' ) jmsServers=cmo.getJMSServers() # Find the list of all JMSServers for this server namesOfJMSServers = '' for jmsServer in jmsServers: namesOfJMSServers = jmsServer.getName() + ' ' # Count the number of connections jmsConnections=cmo.getConnections() print str(len(jmsConnections)) + ' JMS Connections found for ' + serverName + ' with JMSServers ' + namesOfJMSServers # Recurse the MBean tree for each connection and pull out some information about consumers for jmsConnection in jmsConnections: try: print 'JMS Connection:' print ' Host Address = ' + jmsConnection.getHostAddress() print ' ClientID = ' + str( jmsConnection.getClientID() ) print ' Sessions Current = ' + str( jmsConnection.getSessionsCurrentCount() ) jmsSessions = jmsConnection.getSessions() for jmsSession in jmsSessions: jmsConsumers = jmsSession.getConsumers() for jmsConsumer in jmsConsumers: print ' Consumer:' print ' Name = ' + jmsConsumer.getName() print ' Messages Received = ' + str(jmsConsumer.getMessagesReceivedCount()) print ' Member Destination Name = ' + jmsConsumer.getMemberDestinationName() except: print 'Error retrieving JMS Consumer Information' dumpStack() # Cleanup disconnect() exit() Example Output I expect the output to look something like this and loop through all the connections, this is just the first one: 1 JMS Connections found for AdminServer with JMSServers myJMSServer JMS Connection: Host Address = 127.0.0.1 ClientID = None Sessions Current = 16 Consumer: Name = consumer40 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Notice that it has the IP Address of the client. There are 16 Sessions open because I’m using an MDB, which defaults to 16 connections, so this matches what I expect. Let’s see what the full output actually looks like: D:\Oracle\fmw11gr1ps3\user_projects\domains\offline_domain>java weblogic.WLST d:\temp\jms.py Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'offline_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. Location changed to serverRuntime tree. This is a read-only tree with ServerRuntimeMBean as the root. For more help, use help(serverRuntime) 1 JMS Connections found for AdminServer with JMSServers myJMSServer JMS Connection: Host Address = 127.0.0.1 ClientID = None Sessions Current = 16 Consumer: Name = consumer40 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer34 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer37 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer16 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer46 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer49 Messages Received = 2 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer43 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer55 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer25 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer22 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer19 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer52 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer31 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer58 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer28 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Consumer: Name = consumer61 Messages Received = 1 Member Destination Name = myJMSModule!myQueue Disconnected from weblogic server: AdminServer Exiting WebLogic Scripting Tool. Thanks to Tom Barnes for the hints and the inspiration to write this up. Image of telephone switchboard courtesy of http://www.JoeTourist.net/ JoeTourist InfoSystems

Read the article

Server Controls in ASP.NET MVC without ViewState

- by imran_ku07

Introduction : ASP.NET Web Forms provides a development environment just like GUI or windows application and try to hide statelessness nature of HTTP protocol. For accomplishing this target, Web Forms uses ViewState (a hidden field) to remove the gap between HTTP statelessness and GUI applications. But the problem with this technique is that ViewState size which grows quickly and also go back and forth with every request, as a result it will degrade application performance. In this article i will try to use existing ASP.NET server controls without ViewState. Description : When you add a server control which needs viewstate, in the presentation view in ASP.NET MVC application without a form tag, for example, <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> It will shows the following exception, Control 'TextBox1' of type 'TextBox' must be placed inside a form tag with runat=server When you place this textbox inside a form tag with runat=server, this will add the following ViewState even when you disable ViewState by using EnableViewState="false" <input type="hidden" value="/wEPDwUJMjgzMDgzOTgzZGQ6u9CwikhHEW39ObrHyLTPFSboPA==" id="__VIEWSTATE" name="__VIEWSTATE"/> The solution to this problem is to use the RenderControl method of server control which is simply renders HTML without any ViewState hidden field. <% TextBox txt = new TextBox(); txt.Text = "abc"; StringBuilder sb = new StringBuilder(); System.IO.StringWriter textwriter = new System.IO.StringWriter(sb); HtmlTextWriter htmlwriter = new HtmlTextWriter(textwriter); txt.RenderControl(htmlwriter); %> <%= sb.ToString() %> This will render <input type="text" > without any View State. This technique become very useful when you are using rich server controls like GridView. For example, let's say you have List of Recalls in Model.Recalls, then you will show your tabular data as, <% GridView gv = new GridView(); gv.AutoGenerateColumns = true; gv.DataSource = Model.Recalls; gv.DataBind(); StringBuilder sb = new StringBuilder(); System.IO.StringWriter textwriter = new System.IO.StringWriter(sb); HtmlTextWriter htmlwriter = new HtmlTextWriter(textwriter); gv.RenderControl(htmlwriter);%> <%= sb.ToString() %> This code might looks odd in your presentation view. A more better approach is to create a HTML Helper method which contains the above code. Summary : In some cases you might needs to use existing ASP.NET Web Forms server controls but also dislikes ViewState. In this article i try to solve this gap by using the RenderControl method of Control class. Hopefully you enjoyed and become ready to create HTML helpers for many of the existing server controls.

Read the article

DBCC CHECKDB (BatmanDb, REPAIR_ALLOW_DATA_LOSS) – Are you Feeling Lucky?

- by David Totzke

I’m currently working for a client on a PowerBuilder to WPF migration. It’s one of those “I could tell you, but I’d have to kill you” kind of clients and the quick-lime pits are currently occupied by the EMC tech…but I’ve said too much already. At approximately 3 or 4 pm that day users of the Batman[1] application here in Gotham[1] started to experience problems accessing the application. Batman[2] is a document management system here that also integrates with the ERP system. Very little goes on here that doesn’t involve Batman in some way. The errors being received seemed to point to network issues (TCP protocol error, connection forcibly closed by the remote host etc…) but the real issue was much more insidious. Connecting to the database via SSMS and performing selects on certain tables underlying the application areas that were having problems started to reveal the issue. You couldn’t do a SELECT * FROM MyTable without it bombing and giving the same error noted above. A run of DBCC CHECKDB revealed 14 tables with corruption. One of the tables with issues was the Document table. Pretty central to a “document management” system. Information was obtained from IT that a single drive in the SAN went bad in the night. A new drive was in place and was working fine. The partition that held the Batman database is configured for RAID Level 5 so a single drive failure shouldn’t have caused any trouble and yet, the database is corrupted. They do hourly incremental backups here so the first thing done was to try a restore. A restore of the most recent backup failed so they worked backwards until they hit a good point. This successful restore was for a backup at 3AM – a full day behind. This time also roughly corresponds with the time the SAN started to report the drive failure. The plot thickens… I got my hands on the output from DBCC CHECKDB and noticed a pattern. What’s sad is that nobody that should have noticed the pattern in the DBCC output did notice. There was a rush to do things to try and recover the data before anybody really understood what was wrong with it in the first place. Cooler heads must prevail in these circumstances and some investigation should be done and a plan of action laid out or you could end up making things worse[3]. DBCC CHECKDB also told us that: repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKDB Yikes. That means that the database is so messed up that you’re definitely going to lose some stuff when you repair it to get it back to a consistent state. All the more reason to do a little more investigation into the problem. Rescuing this database is preferable to having to export all of the data possible from this database into a new one. This is a fifteen year old application with about seven hundred tables. There are TRIGGERS everywhere not to mention the referential integrity constraints to deal with. Only fourteen of the tables have an issue. We have a good backup that is missing the last 24 hours of business which means we could have a “do-over” of yesterday but that’s not a very palatable option either. All of the affected tables had TEXT columns and all of the errors were about LOB data types and orphaned off-row data which basically means TEXT, IMAGE or NTEXT columns. If we did a SELECT on an affected table and excluded those columns, we got all of the rows. We exported that data into a separate database. Things are looking up. Working on a copy of the production database we then ran DBCC CHECKDB with REPAIR_ALLOW_DATA_LOSS and that “fixed” everything up. The allow data loss option will delete the bad rows. This isn’t too horrible as we have all of those rows minus the text fields from out earlier export. Now I could LEFT JOIN to the exported data to find the missing rows and INSERT them minus the TEXT column data. We had the restored data from the good 3AM backup that we could now JOIN to and, with fingers crossed, recover the missing TEXT column information. We got lucky in that all of the affected rows were old and in the end we didn’t lose anything. :O All of the row counts along the way worked out and it looks like we dodged a major bullet here. We’ve heard back from EMC and it turns out the SAN firmware that they were running here is apparently buggy. This thing is only a couple of months old. Grrr…. They dispatched a technician that night to come and update it . That explains why RAID didn’t save us. All-in-all this could have been a lot worse. Given the root cause here, they basically won the lottery in not losing anything. Here are a few links to some helpful posts on the SQL Server Engine blog. I love the title of the first one: Which part of 'REPAIR_ALLOW_DATA_LOSS' isn't clear? CHECKDB (Part 8): Can repair fix everything? (in fact, read the whole series) Ta da! Emergency mode repair (we didn’t have to resort to this one thank goodness) Dave Just because I can… [1] Names have been changed to protect the guilty. [2] I'm Batman. [3] And if I'm the coolest head in the room, you've got even bigger problems...

Read the article

Use WLST to Delete All JMS Messages From a Destination

- by james.bayer

I got a question today about whether WebLogic Server has any tools to delete all messages from a JMS Queue. It just so happens that the WLS Console has this capability already. It’s available on the screen after the “Show Messages” button is clicked on a destination’s Monitoring tab as seen in the screen shot below. The console is great for something ad-hoc, but what if I want to automate this? Well it just so happens that the console is just a weblogic application layered on top of the JMX Management interface. If you look at the MBean Reference, you’ll find a JMSDestinationRuntimeMBean that includes the operation deleteMessages that takes a JMS Message Selector as an argument. If you pass an empty string, that is essentially a wild card that matches all messages. Coding a stand-alone JMX client for this is kind of lame, so let’s do something more suitable to scripting. In addition to the console, WebLogic Scripting Tool (WLST) based on Jython is another way to browse and invoke MBeans, so an equivalent interactive shell session to delete messages from a destination would looks like this: D:\Oracle\fmw11gr1ps3\user_projects\domains\hotspot_domain\bin>setDomainEnv.cmd D:\Oracle\fmw11gr1ps3\user_projects\domains\hotspot_domain>java weblogic.WLST Initializing WebLogic Scripting Tool (WLST) ... Welcome to WebLogic Server Administration Scripting Shell Type help() for help on available commands wls:/offline> connect('weblogic','welcome1','t3://localhost:7001') Connecting to t3://localhost:7001 with userid weblogic ... Successfully connected to Admin Server 'AdminServer' that belongs to domain 'hotspot_domain'. Warning: An insecure protocol was used to connect to the server. To ensure on-the-wire security, the SSL port or Admin port should be used instead. wls:/hotspot_domain/serverConfig> serverRuntime() Location changed to serverRuntime tree. This is a read-only tree with ServerRuntimeMBean as the root. For more help, use help(serverRuntime) wls:/hotspot_domain/serverRuntime> cd('JMSRuntime/AdminServer.jms/JMSServers/JMSServer-0/Destinations/SystemModule-0!Queue-0') wls:/hotspot_domain/serverRuntime/JMSRuntime/AdminServer.jms/JMSServers/JMSServer-0/Destinations/SystemModule-0!Queue-0> ls() dr-- DurableSubscribers -r-- BytesCurrentCount 0 -r-- BytesHighCount 174620 -r-- BytesPendingCount 0 -r-- BytesReceivedCount 253548 -r-- BytesThresholdTime 0 -r-- ConsumersCurrentCount 0 -r-- ConsumersHighCount 0 -r-- ConsumersTotalCount 0 -r-- ConsumptionPaused false -r-- ConsumptionPausedState Consumption-Enabled -r-- DestinationInfo javax.management.openmbean.CompositeDataSupport(compositeType=javax.management.openmbean.CompositeType(name=DestinationInfo,items=((itemName=ApplicationName,itemType=javax.management.openmbean.SimpleType(name=java.lang.String)),(itemName=ModuleName,itemType=javax.management.openmbean.SimpleType(name=java.lang.String)),(itemName openmbean.SimpleType(name=java.lang.Boolean)),(itemName=SerializedDestination,itemType=javax.management.openmbean.SimpleType(name=java.lang.String)),(itemName=ServerName,itemType=javax.management.openmbean.SimpleType(name=java.lang.String)),(itemName=Topic,itemType=javax.management.openmbean.SimpleType(name=java.lang.Boolean)),(itemName=VersionNumber,itemType=javax.management.op ule-0!Queue-0, Queue=true, SerializedDestination=rO0ABXNyACN3ZWJsb2dpYy5qbXMuY29tbW9uLkRlc3RpbmF0aW9uSW1wbFSmyJ1qZfv8DAAAeHB3kLZBABZTeXN0ZW1Nb2R1bGUtMCFRdWV1ZS0wAAtKTVNTZXJ2ZXItMAAOU3lzdGVtTW9kdWxlLTABAANBbGwCAlb6IS6T5qL/AAAACgEAC0FkbWluU2VydmVyAC2EGgJW+iEuk+ai/wAAAAsBAAtBZG1pblNlcnZlcgAthBoAAQAQX1dMU19BZG1pblNlcnZlcng=, ServerName=JMSServer-0, Topic=false, VersionNumber=1}) -r-- DestinationType Queue -r-- DurableSubscribers null -r-- InsertionPaused false -r-- InsertionPausedState Insertion-Enabled -r-- MessagesCurrentCount 0 -r-- MessagesDeletedCurrentCount 3 -r-- MessagesHighCount 2 -r-- MessagesMovedCurrentCount 0 -r-- MessagesPendingCount 0 -r-- MessagesReceivedCount 3 -r-- MessagesThresholdTime 0 -r-- Name SystemModule-0!Queue-0 -r-- Paused false -r-- ProductionPaused false -r-- ProductionPausedState Production-Enabled -r-- State advertised_in_cluster_jndi -r-- Type JMSDestinationRuntime -r-x closeCursor Void : String(cursorHandle) -r-x deleteMessages Integer : String(selector) -r-x getCursorEndPosition Long : String(cursorHandle) -r-x getCursorSize Long : String(cursorHandle) -r-x getCursorStartPosition Long : String(cursorHandle) -r-x getItems javax.management.openmbean.CompositeData[] : String(cursorHandle),Long(start),Integer(count) -r-x getMessage javax.management.openmbean.CompositeData : String(cursorHandle),Long(messageHandle) -r-x getMessage javax.management.openmbean.CompositeData : String(cursorHandle),String(messageID) -r-x getMessage javax.management.openmbean.CompositeData : String(messageID) -r-x getMessages String : String(selector),Integer(timeout) -r-x getMessages String : String(selector),Integer(timeout),Integer(state) -r-x getNext javax.management.openmbean.CompositeData[] : String(cursorHandle),Integer(count) -r-x getPrevious javax.management.openmbean.CompositeData[] : String(cursorHandle),Integer(count) -r-x importMessages Void : javax.management.openmbean.CompositeData[],Boolean(replaceOnly) -r-x moveMessages Integer : String(java.lang.String),javax.management.openmbean.CompositeData,Integer(java.lang.Integer) -r-x moveMessages Integer : String(selector),javax.management.openmbean.CompositeData -r-x pause Void : -r-x pauseConsumption Void : -r-x pauseInsertion Void : -r-x pauseProduction Void : -r-x preDeregister Void : -r-x resume Void : -r-x resumeConsumption Void : -r-x resumeInsertion Void : -r-x resumeProduction Void : -r-x sort Long : String(cursorHandle),Long(start),String[](fields),Boolean[](ascending) wls:/hotspot_domain/serverRuntime/JMSRuntime/AdminServer.jms/JMSServers/JMSServer-0/Destinations/SystemModule-0!Queue-0> cmo.deleteMessages('') 2 where the domain name is “hotspot_domain”, the JMS Server name is “JMSServer-0”, the Queue name is “Queue-0” and the System Module is named “SystemModule-0”. To invoke the operation, I use the “cmo” object, which is the “Current Management Object” that represents the currently navigated to MBean. The 2 indicates that two messages were deleted. Combining this WLST code with a recent post by my colleague Steve that shows you how to use an encrypted file to store the authentication credentials, you could easily turn this into a secure automated script. If you need help with that step, a long while back I blogged about some WLST basics. Happy scripting.

Read the article

Oracle Delivers Latest Release of Oracle Enterprise Manager 12c

- by Scott McNeil

Richer Service Catalog for Database and Middleware as a Service; Enhanced Database and Middleware Management Help Drive Enterprise-Scale Private Cloud Adoption News Summary IT organizations are adopting private clouds as a stepping-stone to business-driven, self-service IT. Successful implementations hinge on the ability to efficiently deploy and manage cloud services at enterprise scale. Having a complete cloud management solution integrated with an enterprise-class technology stack is a fundamental requirement for IT. Oracle Enterprise Manager 12c Release 4 meets that requirement by helping businesses become more agile and responsive, while reducing cost, complexity, and risk. News Facts Oracle Enterprise Manager 12c Release 4, available today, lets organizations rapidly adopt Oracle-based, enterprise-scale private clouds. New capabilities provide advanced technology stack management, secure database administration, and enterprise service governance, enabling Oracle customers and partners to maximize database and application performance and drive innovation using self-service IT platforms. The enhancements have been driven by customers and the growing Oracle Enterprise Manager Ecosystem, comprised of more than 750 Oracle PartnerNetwork (OPN) Specialized partners. Oracle and its partners and customers have built over 140 plug-ins and connectors for Oracle Enterprise Manager. Watch the video highlights. Automation for Broader Cloud Services Oracle Enterprise Manager 12c Release 4 allows for a rapid enterprise-wide adoption of database, middleware and infrastructure services in the private cloud, driven by an enhanced API-enabled service catalog. The release features “push button” style provisioning of complete environments such as SOA and Oracle Active Data Guard, and fast data cloning that enables rapid deployment and testing of enterprise applications. Out-of-the-box capabilities to detect data and configuration vulnerabilities provide enhanced cloud service governance along with greater operational control through a flexible and extensible showback mechanism. Enhanced Database Management A new performance warehouse enables predictive database diagnostics and trend analysis and helps identify database problems before they occur. New enterprise data-governance capabilities enhance security by helping systematically discover and protect sensitive data. Step-by-step orchestration of upgrades with the ability to rollback changes enables faster adoption of Oracle Database 12c. Expanded Fusion Middleware Management A new consolidated view of Oracle Fusion Middleware 12c deployments with a guided management capability lets administrators apply best management practices to diverse middleware environments and identify performance issues quickly. A Java VM Diagnostics as a Service feature allows governed access to diagnostics data for IT workers across multiple disciplines for accelerated DevOps resolutions of defects and performance optimization. New automated provisioning for SOA lets middleware administrators perform mass SOA provisioning with ease. Superior Enterprise-Grade Management Private roles and preferred credentials have been added to Oracle Enterprise Manager to provide additional fine-grained security for organizations with complex access control requirements. A new security console provides a single point of control for managing the security of Oracle Enterprise Manager environments. Support for the latest industry standard SNMP v3 protocol, including encryption, enables more secure heterogeneous management. “Smart monitoring” adapts to observed environmental changes and adds self-management capabilities to help Oracle Enterprise Manager run at peak performance, while demanding less IT supervision. Supporting Quotes “Lawrence Livermore National Laboratory has a strong tradition of technology breakthroughs and leadership. As a member of Oracle’s Customer Advisory Board for Oracle Enterprise Manager, we have consistently provided feedback and guidance in the areas of enterprise-scale cloud, self-diagnosability, and secure administration for the product,” said Tim Frazier, CIO, NIF and Photon Sciences, Lawrence Livermore National Laboratory. “We intend to take advantage of the Release 4 features that support enterprise-scale availability and fine-grained security capabilities for private cloud deployments.” “IDC's most recent CloudTrack survey shows that most enterprises plan to adopt hybrid cloud architectures over the next three years,” said Mary Johnston Turner, Research Vice President, Enterprise System Management Software, IDC. “These organizations plan to deploy a wide range of workloads into cloud environments including mission critical database and middleware services that require high levels of fault tolerance and disaster recovery. Such capabilities were traditionally custom configured for each application but cloud offers the possibility to incorporate such properties within the service definition, enabling organizations to adopt cloud without compromise. With the latest release of Oracle Enterprise Manager 12c, Oracle is providing customers with an out-of-the-box experience for delivering highly-resilient cloud services for databases and applications.” “Since its inception, Oracle has been leading the way in innovative, scalable and high performance solutions for the enterprise. With this release of Oracle Enterprise Manager, we are extending this leadership by providing enterprise-scale capabilities for planning, delivering, and managing private clouds. We call this ‘zero-to-cloud – accelerated.’ These enhancements help our customers to expedite their adoption of cloud computing and prepares them for the next generation of self-service IT,” said Prakash Ramamurthy, senior vice president of Systems and Cloud Management at Oracle. Supporting Resources Oracle Enterprise Manager 12c Video: Cerner Delivers High Performance Private Cloud Video: BIAS Achieves Outstanding Results with Private Cloud Press Release Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager 12c Mobile app

Read the article

Token based Authentication for WCF HTTP/REST Services: Authentication

- by Your DisplayName here!

This post shows some of the implementation techniques for adding token and claims based security to HTTP/REST services written with WCF. For the theoretical background, see my previous post. Disclaimer The framework I am using/building here is not the only possible approach to tackle the problem. Based on customer feedback and requirements the code has gone through several iterations to a point where we think it is ready to handle most of the situations. Goals and requirements The framework should be able to handle typical scenarios like username/password based authentication, as well as token based authentication The framework should allow adding new supported token types Should work with WCF web programming model either self-host or IIS hosted Service code can rely on an IClaimsPrincipal on Thread.CurrentPrincipal that describes the client using claims-based identity Implementation overview In WCF the main extensibility point for this kind of security work is the ServiceAuthorizationManager. It gets invoked early enough in the pipeline, has access to the HTTP protocol details of the incoming request and can set Thread.CurrentPrincipal. The job of the SAM is simple: Check the Authorization header of the incoming HTTP request Check if a “registered” token (more on that later) is present If yes, validate the token using a security token handler, create the claims principal (including claims transformation) and set Thread.CurrentPrincipal If no, set an anonymous principal on Thread.CurrentPrincipal. By default, anonymous principals are denied access – so the request ends here with a 401 (more on that later). To wire up the custom authorization manager you need a custom service host – which in turn needs a custom service host factory. The full object model looks like this: Token handling A nice piece of existing WIF infrastructure are security token handlers. Their job is to serialize a received security token into a CLR representation, validate the token and turn the token into claims. The way this works with WS-Security based services is that WIF passes the name/namespace of the incoming token to WIF’s security token handler collection. This in turn finds out which token handler can deal with the token and returns the right instances. For HTTP based services we can do something very similar. The scheme on the Authorization header gives the service a hint how to deal with an incoming token. So the only missing link is a way to associate a token handler (or multiple token handlers) with a scheme and we are (almost) done. WIF already includes token handler for a variety of tokens like username/password or SAML 1.1/2.0. The accompanying sample has a implementation for a Simple Web Token (SWT) token handler, and as soon as JSON Web Token are ready, simply adding a corresponding token handler will add support for this token type, too. All supported schemes/token types are organized in a WebSecurityTokenHandlerCollectionManager and passed into the host factory/host/authorization manager. Adding support for basic authentication against a membership provider would e.g. look like this (in global.asax): var manager = new WebSecurityTokenHandlerCollectionManager(); manager.AddBasicAuthenticationHandler((username, password) => Membership.ValidateUser(username, password)); Adding support for Simple Web Tokens with a scheme of Bearer (the current OAuth2 scheme) requires passing in a issuer, audience and signature verification key: manager.AddSimpleWebTokenHandler( "Bearer", "http://identityserver.thinktecture.com/trust/initial", "https://roadie/webservicesecurity/rest/", "WFD7i8XRHsrUPEdwSisdHoHy08W3lM16Bk6SCT8ht6A="); In some situations, SAML token may be used as well. The following configures SAML support for a token coming from ADFS2: var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri("https://roadie/webservicesecurity/rest/")); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from config) adfsConfig.ServiceTokenResolver = IdentityModelConfiguration.ServiceConfiguration.CreateAggregateTokenResolver(); manager.AddSaml11SecurityTokenHandler("SAML", adfsConfig); Transformation The custom authorization manager will also try to invoke a configured claims authentication manager. This means that the standard WIF claims transformation logic can be used here as well. And even better, can be also shared with e.g. a “surrounding” web application. Error handling A WCF error handler takes care of turning “access denied” faults into 401 status codes and a message inspector adds the registered authentication schemes to the outgoing WWW-Authenticate header when a 401 occurs. The next post will conclude with authorization as well as the source code download. (Wanna learn more about federation, WIF, claims, tokens etc.? Click here.)

Read the article

Optimizing MySQL for small VPS

- by Chris M

I'm trying to optimize my MySQL config for a verrry small VPS. The VPS is also running NGINX/PHP-FPM and Magento; all with a limit of 250MB of RAM. This is an output of MySQL Tuner... -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.41-3ubuntu12.8 [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in MyISAM tables: 1M (Tables: 14) [--] Data in InnoDB tables: 29M (Tables: 301) [--] Data in MEMORY tables: 1M (Tables: 17) [!!] Total fragmented tables: 301 -------- Security Recommendations ------------------------------------------- [OK] All database users have passwords assigned -------- Performance Metrics ------------------------------------------------- [--] Up for: 2d 11h 14m 58s (1M q [8.038 qps], 33K conn, TX: 2B, RX: 618M) [--] Reads / Writes: 83% / 17% [--] Total buffers: 122.0M global + 8.6M per thread (100 max threads) [!!] Maximum possible memory usage: 978.2M (404% of installed RAM) [OK] Slow queries: 0% (37/1M) [OK] Highest usage of available connections: 6% (6/100) [OK] Key buffer size / total MyISAM indexes: 32.0M/282.0K [OK] Key buffer hit rate: 99.7% (358K cached / 1K reads) [OK] Query cache efficiency: 83.4% (1M cached / 1M selects) [!!] Query cache prunes per day: 48301 [OK] Sorts requiring temporary tables: 0% (0 temp sorts / 144K sorts) [OK] Temporary tables created on disk: 13% (27K on disk / 203K total) [OK] Thread cache hit rate: 99% (6 created / 33K connections) [!!] Table cache hit rate: 0% (32 open / 51K opened) [OK] Open file limit used: 1% (20/1K) [OK] Table locks acquired immediately: 99% (1M immediate / 1M locks) [!!] InnoDB data size / buffer pool: 29.2M/8.0M -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance Reduce your overall MySQL memory footprint for system stability Enable the slow query log to troubleshoot bad queries Increase table_cache gradually to avoid file descriptor limits Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 64M) table_cache (> 32) innodb_buffer_pool_size (>= 29M) and this is the config. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 32M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 sort_buffer_size = 4M read_buffer_size = 4M myisam_sort_buffer_size = 16M # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP max_connections = 100 table_cache = 32 tmp_table_size = 128M #thread_concurrency = 10 # # * Query Cache Configuration # #query_cache_limit = 1M query_cache_type = 1 query_cache_size = 64M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ The site contains 1 wordpress site,so lots of MYISAM but mostly static content as its not changing all that often (A wordpress cache plugin deals with this). And the Magento Site which consists of a lot of InnoDB tables, some MyISAM and some INMEMORY. The "read" side seems to be running pretty well with a mass of optimizations I've used on Magento, the NGINX setup and PHP-FPM + XCACHE. I'd love to have a kick in the right direction with the MySQL config so I'm not blindly altering it based on the MySQLTuner without understanding what I'm changing. Thanks

Search Results

Search found 4009 results on 161 pages for 'protocol buffers'.

Page 143/161 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150 | Next Page >

- by user432506

- by jayatheertha.rao(at)oracle.com

- by Brian Donahue

- by tacone

- by a.toraby

- by user206316

- by sreejukg

- by james.bayer

- by Brian

- by Mat Keep

- by Shawn Cicoria

- by JoshReuben

- by MightyZot

- by Saad Imran.

- by Manoj Neelapu

- by Vladimir Kadalashvili

- by kyle.hatlestad

- by ManojDhobale

- by james.bayer

- by imran_ku07

- by David Totzke

- by james.bayer

- by Scott McNeil

- by Your DisplayName here!

- by Chris M

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150 | Next Page >