Search Results

Search found 3799 results on 152 pages for 'r2'.

Page 143/152 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• Accomodating Multiple DLL Versions

  - by shadeseeker

  I have an application that uses a Microsoft DLL (Microsoft.ComponentStudio.ComponentPlatformImplementation.dll) which is used for OS deployment and accessing the catalog files. Version 6.0.0.0 is specific to the Windows Server 2008 catalog files. The newer version 6.1.0.0 is specific to Windows Server 2008 R2 catalog files. Attempting to access a catalog file with the incorrect version results in an exception. My application (VB.NET using VS2005) needs to be able to access either version of these catalogs - I'd be happy with two executables (one for each catalog version) but obviously I don't want to maintain two sets of source code for each. Specifying both sets of DLLs in the project reference is not possible as the DLL names are identical. I'd rather not have to manually add and remove the DLL references each time I want to a build. As far as I know the interfaces etc are effectively identical between the two. I've read a few articles here and elsewhere about bindingRedirect, Assembly.Load etc but none seem to be bearing fruit. Any guidance on the best path to follow would be greatly appreciated. Thanks.

  Read the article

• Update on: How to model random non-overlapping spheres of non-uniform size in a cube using Matlab?

  - by user3838079

  I am trying to use MATLAB for generating random locations for non-uniform size spheres (non-overlapping) in a cube. The for loop in the code below never seems to end. I don't know what am missing in the code. I have ran the code for no. of spheres (n) = 10; dims = [ 10 10 10 ] function [ c r ] = randomSphere( dims ) % creating one sphere at random inside [0..dims(1)]x[0..dims(2)]x... % radius and center coordinates are sampled from a uniform distribution % over the relevant domain. % output: c - center of sphere (vector cx, cy,... ) % r - radius of sphere (scalar) r = rand(1); % you might want to scale this w.r.t dims or other consideration c = r + rand( size(dims) )./( dims - 2*r ); % make sure sphere does not exceed boundaries function ovlp = nonOverlapping( centers, rads ) % check if several spheres with centers and rads overlap or not ovlp = false; if numel( rads ) == 1 return; % nothing to check for a single sphere end dst = sqrt( sum( bsxfun( @minus, permute( centers, [1 3 2] ),... permute( centers, [3 1 2] ) ).^2, 3) ); ovlp = dst >= bsxfun( @plus, rads, rads.' ); %' all distances must be smaller than r1+r2 ovlp = any( ovlp(:) ); % all must not overlap function [centers rads] = sampleSpheres( dims, n ) % dims is assumed to be a row vector of size 1-by-ndim % preallocate ndim = numel(dims); centers = zeros( n, ndim ); rads = zeros( n, 1 ); ii = 1; while ii <= n [centers(ii,:), rads(ii) ] = randomSphere( dims ); if nonOverlapping( centers(1:ii,:), rads(1:ii) ) ii = ii + 1; % accept and move on end end

  Read the article

• SQL Database Schema Design For Large 3 Billion Relationship Database.

  - by K-Bell

  Get your geek on. Can you solve this? I am designing a products database for SQL Server 2008 R2 Ed. (not Enterprise Ed.) that will be used to store custom product configurations for over 30,000 distinct products. The database will have up to 500 users at a time. Here is the design problem… Each Product has a collection of Parts (up to 50 parts per product). So if I have 30,000 Products and each of them can have up to 50 Parts, that’s 1.5 million distinct Product-to-Part relationships …or as an equation… 30,000 (Products) X 50 (Parts) = 1.5 million Product-to-Parts records. …and If… Each Part can have up to 2000 finish options (A finish is a paint color). NOTE: Only one finish will be selected by a user at run-time. The 2000 finish options I need to store are the allowed options for a specific part on a specific product. So if I have 1.5 million distinct product-to-part relationships/records and each of those parts can have up to 2,000 finishes that is 3 billion allowable product-to-part-to finish relationships/records …or as an equation… 1.5 million (Parts) x 2,000 (Finishes) = 3 Billion Product-to-Part-to-Finishes records. How can I design this database so that I can execute fast and efficient queries for a specific product and return its list of Parts and all the allowable Finishes for each part without 3 Billion Product-to-Part-to-Finish records? Read time is more important then write time. Please post your thoughts/suggestions if you have experience with large databases. Thanks!

  Read the article

• C# ? Can anyone explain the strange behaviour?

  - by partizan

  Hi, guys. Here is the example with comments: class Program { // first version of structure public struct D1 { public double d; public int f; } // during some changes in code then we got D2 from D1 // Field f type became double while it was int before public struct D2 { public double d; public double f; } static void Main(string[] args) { // Scenario with the first version D1 a = new D1(); D1 b = new D1(); a.f = b.f = 1; a.d = 0.0; b.d = -0.0; bool r1 = a.Equals(b); // gives true, all is ok // The same scenario with the new one D2 c = new D2(); D2 d = new D2(); c.f = d.f = 1; c.d = 0.0; d.d = -0.0; bool r2 = c.Equals(d); // false, oops! this is not the result i've expected for } } So, what do you think about this?

  Read the article

• Can I split a single SQL 2008 DB Table into multiple filegroups, based on a discriminator column?

  - by Pure.Krome

  Hi folks, I've got a SQL Server 2008 R2 database which has a number of tables. Two of these tables contains a lot of large data .. mainly because one of them is VARBINARY(MAX) and the sister table is GEOGRAPHY. (Why two tables? Read Below if you're interested***) The data in these tables are geospatial shapes, such as zipcode boundaries. Now, the first 70K odd rows are for DataType = 1 the rest 5mil rows are for DataType = 2 Now, is it possible to split the table data into two files? so all rows that are for DataType != 2 goes into File_A and DataType = 2 goes into File_B? This way, when I backup the DB, I can skip adding File_B so my download is waaaaay smaller? Is this possible? I guessing you might be thinking - why not keep them as TWO extra tables? Mainly because in the code, the data is conceptually the same .. it's just happens that I want to split the storage of this model data. It really messes up my model if I now how two aggregates in my model, instead of one. ***Entity Framework doesn't like Tables with GEOGRAPHY, so i have to create a new table which transforms the GEOGRAPHY to VARBINARY, and then drop that into EF.

  Read the article

• c# STILL returning wrong number of cores

  - by Justin

  Ok, so I posted in In C# GetEnvironmentVariable("NUMBER_OF_PROCESSORS") returns the wrong number asking about how to get the correct number of cores in C#. Some helpful people directed me to a couple of questions where similar questions were asked but I have already tried those solutions. My question was then closed as being the same as another question, which is true, it is, but the solution given there didn't work. So I'm opening another one hoping that someone may be able to help realising that the other solutions DID NOT work. That question was How to find the Number of CPU Cores via .NET/C#? which used WMI to try to get the correct number of cores. Well, here's the output from the code given there: Number Of Cores: 32 Number Of Logical Processors: 32 Number Of Physical Processors: 4 As per my last question, the machine is a 64 core AMD Opteron 6276 (4x16 cores) running Windows Server 2008 R2 HPC edition. Regardless of what I do Windows always seems to return 32 cores even though 64 are available. I have confirmed the machine is only using 32 and if I hardcode 64 cores, then the machine uses all of them. I'm wondering if there might be an issue with the way the AMD CPUs are detected. FYI, in case you haven't read the last question, if I type echo %NUMBER_OF_PROCESSORS" at the command line, it returns 64. It just won't do it in a programming environment. Thanks, Justin UPDATE: Outputting PROCESSOR_ARCHITECTURE returns AMD64 from the command line, but x86 from the program. The program is 32-bit running on 64-bit hardware. I was asked to compile it to 64-bit but it still shows 32 cores.

  Read the article

• How to delete a row from a typed dataset and save it to a database?

  - by Zingam

  I am doing this as a small project to learn about disconnected and connected models in .NET 4.0 and SQL Server 2008 R2. I have three tables: Companies (PK CompanyID) Addresses (PK AddressID, FK CompanyID) ContactPersons (PK ContactPersonID, FK CompanyID) CompanyID is assigned manually by the users. The other IDs are auto-generated. Companies has a one-to-many relationship with ContactPerson. I have set any changes to cascade. I display all records in Companies in a DataGridView and when a row is clicked, the corresponding records in ContactPersons are displayed in a second DataGridView. I have successfully implemented updating and inserting new records but I completely fail in my attempts to delete rows and save the changes to the database. I us a typed dataset. If I use this: DataRow[] contactPersonRows = m_SoldaCompaniesFileDataSet.ContactPersons.Select("ContactPersonID = " + this.m_CurrentContactPerson.ContactPersonID); m_SoldaCompaniesFileDataSet.ContactPersons.Rows.Remove(contactPersonRows[0]); The records are displayed properly in the DataGridView but are not saved in the database later. If I use this: DataRow row = m_SoldaCompaniesFileDataSet.ContactPersons.Rows.Find(this.m_CurrentContactPerson.ContactPersonID); row.Delete(); The records are set but I get an exeception: DeletedRowInaccessibleException, when I try to refresh the DataGridView. The exception pop-s up in the auto-generated dataset.design file. I am pretty much stuck at this point since yesterday. I cannot find anything anywhere that remotely resembles my problem. And I cannot understand actually what is going on.

  Read the article

• Time out when creating a site collection

  - by Daeko

  I am trying to create a site collection programmatically. It has worked for about 6 months, but after the servers have been updated (various patches) it doesn’t work anymore (we have 3 servers: 1 development, 1 test, 1 production). It is still working in my development environment which hasn’t been updated, but not on the two others. I don’t receive any error messages, it just hangs at the code that is supposed to add the site collection (see code below). I am using Windows Server 2003 R2 and Sharepoint 2007 (version 12.0.0.6421 ). It doesn’t give me any errors, it just hangs until Internet Explorer comes with a “request timed out” response. If I try and debug the code, the code just stops there and nothing happens. No error messages or anything. public static string CreateSPAccountSite(string siteName) { string url = ""; SPSecurity.RunWithElevatedPrivileges(delegate() { SPWeb web = SPContext.Current.Web; using (SPSite siteCollectionOuter = new SPSite(web.Site.ID)) { SPWebApplication webApp = siteCollectionOuter.WebApplication; SPSiteCollection siteCollection = webApp.Sites; SPSite site = siteCollection.Add("sites/" + siteName, siteName, "Auto generated Site collection.", 1033, "STS#0", siteCollectionOuter.Owner.LoginName, siteCollectionOuter.Owner.Name, siteCollectionOuter.Owner.Email); //Hangs here site.PortalName = "Portal"; site.PortalUrl = mainUrl; // https://www.ourdomain.net url = site.Url; } }); return url; //Should be "https://www.outdomain.net/sites/siteName" }

  Read the article

• C# WTF? Can anyone explain the strange behaviour?

  - by partizan

  Hi, guys. Here is the example with comments: class Program { // first version of structure public struct D1 { public double d; public int f; } // during some changes in code then we got D2 from D1 // Field f type became double while it was int before public struct D2 { public double d; public double f; } static void Main(string[] args) { // Scenario with the first version D1 a = new D1(); D1 b = new D1(); a.f = b.f = 1; a.d = 0.0; b.d = -0.0; bool r1 = a.Equals(b); // gives true, all is ok // The same scenario with the new one D2 c = new D2(); D2 d = new D2(); c.f = d.f = 1; c.d = 0.0; d.d = -0.0; bool r2 = c.Equals(d); // false, oops! this is not the result i've expected for } } So, what do you think about this?

  Read the article

• SQL Server insert performance with and without primary key

  - by Eric

  Summary: I have a table populated via the following: insert into the_table (...) select ... from some_other_table Running the above query with no primary key on the_table is ~15x faster than running it with a primary key, and I don't understand why. The details: I think this is best explained through code examples. I have a table: create table the_table ( a int not null, b smallint not null, c tinyint not null ); If I add a primary key, this insert query is terribly slow: alter table the_table add constraint PK_the_table primary key(a, b); -- Inserting ~880,000 rows insert into the_table (a,b,c) select a,b,c from some_view; Without the primary key, the same insert query is about 15x faster. However, after populating the_table without a primary key, I can add the primary key constraint and that only takes a few seconds. This one really makes no sense to me. More info: The estimated execution plan shows 0% total query time spent on the clustered index insert SQL Server 2008 R2 Developer edition, 10.50.1600 Any ideas?

  Read the article

• Entityframework duplicate record on second insert

  - by Delysid

  I am building an application for recipe/meal planning, and i have come across a problem i cant seem to figure out. i have a table for units of measure, where i keep the used units in, i only want unique units in here (for grocery list calculation and so forth) but if i use a unit from the table on a recipe, the first time it is okay, nothing is inserted in units of measure, but the second time i get a "duplicate". i suspect it has something to do with entitykey, because the primary key is identity column on the sql server (2008 r2) for some reason it works to change the objectstate on some objects (courses, see code) and that does not generate a duplicate, but that does not work on the unit of measure my insert methods looks like this : public recipe Create(recipe recipe) { using (RecipeDataContext ctx = new RecipeDataContext()) { foreach (recipe_ingredient rec_ing in recipe.recipe_ingredient) { if (rec_ing.ingredient.ingredient_id == 0) { ingredient ing = (from _ing in ctx.ingredients where _ing.name == rec_ing.ingredient.name select _ing).FirstOrDefault(); if (ing != null) { rec_ing.ingredient_id = ing.ingredient_id; rec_ing.ingredient = null; } } if (rec_ing.unit_of_measure.unit_of_measure_id == 0) { unit_of_measure _uom = (from dbUom in ctx.unit_of_measure where dbUom.unit == rec_ing.unit_of_measure.unit select dbUom).FirstOrDefault(); if (_uom != null) { rec_ing.unit_of_measure_id = _uom.unit_of_measure_id; rec_ing.unit_of_measure = null; } } ctx.Recipes.AddObject(recipe); //for some reason it works to change object state of this, and not generate a duplicate ctx.ObjectStateManager.ChangeObjectState(recipe.courses[0], EntityState.Unchanged); } ctx.SaveChanges(); } return recipe; } My datamodel looks like this : http://i.imgur.com/NMwZv.png

  Read the article

• Group Policy error 1006 with and error code 52

  - by Bernesto

  I have a hyper-v cluster operating on win2k8 R2 in a 2003 forest. These servers are at our NOC with a DC that connects to our PDC at HQ via a persistent VPN. The cluster boxes are reporting a error event ID 1006 shown below. The DC is also reporting an error 5805 also shown below. I have found numorus posts regarding 1006 errors, but none for error ID 52's. It's weird, I can ping and I can browse network shares on the DC from each. I thought maybe a DNS or net work issue, but nslook up works too. Event 1006 <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" /> <EventID>1006</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>1</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2013-12-17T00:08:19.582292600Z" /> <EventRecordID>41808</EventRecordID> <Correlation ActivityID="{26B10592-6228-4A3E-845B-E04B49702A54}" /> <Execution ProcessID="964" ThreadID="1384" /> <Channel>System</Channel> <Computer>NEOREEFVH1.neoreef.com</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="SupportInfo1">1</Data> <Data Name="SupportInfo2">5012</Data> <Data Name="ProcessingMode">0</Data> <Data Name="ProcessingTimeInMilliseconds">1138</Data> <Data Name="ErrorCode">52</Data> <Data Name="ErrorDescription">Unavailable</Data> <Data Name="DCName" /> </EventData> </Event> Event 5805 Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 5805 Date: 12/16/2013 Time: 2:32:01 PM User: N/A Computer: NEOREEFSRV15 Description: The session setup from the computer NEOREEFVH3 failed to authenticate. The following error occurred: Access is denied. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 22 00 00 c0 "..À Here are the networks on the hosts: Any with a "Enabled" Are virtual switches.

  Read the article

• Installing WindowsAuthentication breaks authentication / web.config?

  - by Ian Quigley

  I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. (How to use locking in IIS7 Configuration) UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in. It all works fine under Windows 7 IIS 7 locally (has been for months) Web.Config <system.webServer> (edit) <handlers> ( deleted removes/adds ) </handlers> <security> <authentication> 96: <windowsAuthentication enabled="true" useKernelMode="true"> <extendedProtection tokenChecking="Allow" /> <providers> <clear /> <add value="NTLM" /> <add value="Negotiate" /> </providers> </windowsAuthentication> </authentication> </security>

  Read the article

• How to run VisualSVN Server on port 443 running IIS on same server?

  - by Metro Smurf

  Server 2008 R2 SP1 VisualSVN Server 2.1.6 The IIS server has about 10 sites. One of them uses https over port 443 with the following bindings: http x.x.x.39:80 site.com http x.x.x.39:80 www.site.com https x.x.x.39:443 VisualSVN Server Properties server name: svn.SomeSite.com server port: 443 Server Binding: x.x.x.40 No sites on IIS are listening to x.x.x.40. When starting up VisualSVN server, the following errors are thrown: make_sock: could not bind to address x.x.x.40:443 (OS 10013) An attempt was made to access a socket in a way forbidden by its access permissions. no listening sockets available, shutting down When I stop Site.com on IIS, then VisualSVN Server starts up without a problem. When I bind VisualSVN server to port 8443 and start Site.com, then VisualSVN Server starts without a problem. My goal is to be able to access the VisualSvn Server with a normal url, i.e., one that does't use a port number in the address: https://svn.site.com vs https://svn.site.com:8443 What needs to be configured to allow VisualSVN Server to run on port 443 with IIS running on the same server? Edit / Answer The answer provided by Ivan did point me in the right direction. For anyone else running into this, here is a bit more information. Even though my IIS had no bindings set to the IP address I am using for VisualSvn, IIS will still take the IP address hostage unless IIS is explicitly told which IP addresses to listen to. There is no GUI in Win Server 2k8 to configure the IP addresses for IIS to listen; by default, IIS listens to all IP addresses assigned to the server. The following will help configure IIS to only listen to the IP addresses you want: open a command prompt enter: netsh enter: http enter: show iplisten -- this will show a table of the IP addresses IIS is listening to. By default, the table will be empty (I guess this means IIS listens to all IP's) For each IP address IIS should listen to, enter: add iplisten ipaddress=x.x.x.x enter: show iplisten -- you should now see all the IP addresses added to the listening table. Exit and then reset IIS. Each of these commands can also be run directly, i.e., netsh http show iplisten If you need to delete an IP address from the listening table: open a command prompt enter: netsh enter: http enter: delete iplisten ipaddress=x.x.x.x Exit and then reset IIS.

  Read the article

• System Account Logon Failures ever 30 seconds

  - by floyd

  We have two Windows 2008 R2 SP1 servers running in a SQL failover cluster. On one of them we are getting the following events in the security log every 30 seconds. The parts that are blank are actually blank. Has anyone seen similar issues, or assist in tracking down the cause of these events? No other event logs show anything relevant that I can tell. Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 10/17/2012 10:02:04 PM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: SERVERNAME.domainname.local Description: An account failed to log on. Subject: Security ID: SYSTEM Account Name: SERVERNAME$ Account Domain: DOMAINNAME Logon ID: 0x3e7 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Account Domain: Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x238 Caller Process Name: C:\Windows\System32\lsass.exe Network Information: Workstation Name: SERVERNAME Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: Schannel Authentication Package: Kerberos Transited Services: - Package Name (NTLM only): - Key Length: 0 Second event which follows every one of the above events Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 10/17/2012 10:02:04 PM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: SERVERNAME.domainname.local Description: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Account Domain: Failure Information: Failure Reason: An Error occured during Logon. Status: 0xc000006d Sub Status: 0x80090325 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: - Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: Schannel Authentication Package: Microsoft Unified Security Protocol Provider Transited Services: - Package Name (NTLM only): - Key Length: 0 EDIT UPDATE: I have a bit more information to add. I installed Network Monitor on this machine and did a filter for Kerberos traffic and found the following which corresponds to the timestamps in the security audit log. A Kerberos AS_Request Cname: CN=SQLInstanceName Realm:domain.local Sname krbtgt/domain.local Reply from DC: KRB_ERROR: KDC_ERR_C_PRINCIPAL_UNKOWN I then checked the security audit logs of the DC which responded and found the following: A Kerberos authentication ticket (TGT) was requested. Account Information: Account Name: X509N:<S>CN=SQLInstanceName Supplied Realm Name: domain.local User ID: NULL SID Service Information: Service Name: krbtgt/domain.local Service ID: NULL SID Network Information: Client Address: ::ffff:10.240.42.101 Client Port: 58207 Additional Information: Ticket Options: 0x40810010 Result Code: 0x6 Ticket Encryption Type: 0xffffffff Pre-Authentication Type: - Certificate Information: Certificate Issuer Name: Certificate Serial Number: Certificate Thumbprint: So appears to be related to a certificate installed on the SQL machine, still dont have any clue why or whats wrong with said certificate. It's not expired etc.

  Read the article

• Exchange 2010 setup /prepareAD fails to run

  - by MadBoy

  I've tried installing Exchange 2010 on Windows Server 2008 R2 (only domain controller and all-in-one system). I did setup.exe /prepareAD, setup /prepareSchema and it worked fine the first time I did it. Unfortunately due to problem with Hub Transport installation related to (at least from what I've read) IPv6 being disabled (some say disabling it helped them while some enabling helped them). I did it the proper way by using registry entry to disable IPv6 but it still errored out. So i managed to uninstall everything (renamed some old entries in registry of failed Hub Transport roles and tried to reinstal Exchange after rebooting server. Unfortunetly running setup /prepareAD now gives an error: D:setup /PrepareAd Welcome to Microsoft Exchange Server 2010 Unattended Setup By continuing the installation process, you agree to the license terms of Microsoft Exchange Server 2010. If you don't accept these license terms, please cancel the installation. To review these license terms, please go to http://go.microsoft.com/fwlink/?LinkId=150127&clcid=0x409/ Press any key to cancel setup................ No key presses were detected. Setup will continue. Preparing Exchange Setup Copying Setup Files ......................... COMPLETED No server roles will be installed Performing Microsoft Exchange Server Prerequisite Check Organization Checks ......................... COMPLETED Setup is going to prepare the organization for Exchange 2010 by using 'Setup /P repareAD'. No Exchange 2007 server roles have been detected in this topology. Af ter this operation, you will not be able to install any Exchange 2007 server rol es. Configuring Microsoft Exchange Server Organization Preparation ......................... FAILED The following error was generated when "$error.Clear(); buildToBuildUpgrade -ExsetDataAtom -AtomName OrgLevelCt -DomainController $RoleDomainController" was run: "An error occurred with error code '2147504140' and message 'The data type can't be converted to or from a native Active Directory data type.'.". The Exchange Server setup operation did not complete. Visit http://support.micro soft.com and enter the Error ID to find more information. Exchange Server setup encountered an error. Unfortunetly if i rerun the setup it complains that it needs setup /prepareAD to be run first. Basically all that works now is setup /PrepareSchema and setup /PrepareDomain complains that prepareAD wasn't done. For full information I'm also attaching error I had before I've uninstalled everything and tried again: Hub Transport Role Failed Error: The following error was generated when "$error.Clear(); install-ExsetdataAtom -AtomName SharedMachineSettings -DomainController $RoleDomainController" was run: "An error occurred with error code '2147950640' and message 'There is no such object on the server.'.". An error occurred with error code '2147950640' and message 'There is no such object on the server.'.

  Read the article

• Task Scheduler permissions error for some jobs

  - by MaseBase

  I have recently moved to a 64-bit Windows Server 2008 R2. I setup my Scheduled Tasks to run under one user (TaskUser) specifically created for the scheduler and most run just fine. However some of them do not run under TaskUser but will for my own credentials. Here is the Event Log entry I found, which from my research points me to believe that it doesn't have permissions, but it does. It also has the option "Run with highest privileges" checked on. I have seen this particular checkbox work wonders on some tasks, but I have a number of them that it's not helping for. The error is ERROR_ELEVATION_REQUIRED but the user is a member of the administrators group and has folder/file permission and is set to "Run with highest privileges" Log Name: Microsoft-Windows-UAC/Operational Source: Microsoft-Windows-UAC Date: 4/27/2010 2:21:44 PM Event ID: 1 Task Category: (1) Level: Error Keywords: User: LIVE\TaskUser Computer: www2 Description: The process failed to handle ERROR_ELEVATION_REQUIRED during the creation of a child process. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-UAC" Guid="{E7558269-3FA5-46ED-9F4D-3C6E282DDE55}" /> <EventID>1</EventID> <Version>0</Version> <Level>2</Level> <Task>1</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000000</Keywords> <TimeCreated SystemTime="2010-04-27T21:21:44.407053800Z" /> <EventRecordID>19</EventRecordID> <Correlation /> <Execution ProcessID="2460" ThreadID="5960" /> <Channel>Microsoft-Windows-UAC/Operational</Channel> <Computer>www2</Computer> <Security UserID="S-1-5-21-4017510424-2083581016-1307463562-1640" /> </System> <EventData></EventData> </Event> The errors shown in the Task Scheduler History tab display these results and states This operation requires an interactive window station. (0x800705B3) EventID 103 Task Scheduler failed to launch action "F:\App\Path\ConsoleApp.exe" in instance "{1a6d3450-b85a-40c0-b3db-72b98c1aa395}" of task "\taskFolder\taskName". Additional Data: Error Value: 2147943859. EventID 203 Task Scheduler failed to start instance "{1a6d3450-b85a-40c0-b3db-72b98c1aa395}" of "\taskFolder\taskName" task for user "LIVE\TaskUser" . Additional Data: Error Value: 2147943859.

  Read the article

• Hyper-V + RRAS NAT + Port Forwarding + RDP, can I get it all working together?

  - by Tom Bull

  I am running a Windows 2008 R2 server with various services running natively and two virtualised servers running on Hyper-V. The hardware server, I'm going to call it REAL1, has one external NIC, to which I can assign any of the following IP addresses: 1.2.3.4, 1.2.3.5, 1.2.3.6, etc... I need to achieve the following: I would like to be able to connect to REAL1 via remote desktop (RDP / port 3389) on one IP address (say 1.2.3.4), but also to the virtualised servers (I'm going to call them VIRTUAL1 and VIRTUAL2) on the other available IP addresses (say 1.2.3.5 and 1.2.3.6). The easiest way of doing this is to connect the virtual servers directly to the external interface and assign them each their own IP address. REAL1 will have 1.2.3.4, VIRTUAL1 will have 1.2.3.5 and VIRTUAL2 will have 1.2.3.6. Unfortunately, although I don't directly manage the two virtual servers, I have responsibility for their security. I would like to have some kind of firewall between the virtual servers an the internet. I have tried running a virtual machine firewall, but have found the performance on Hyper-V pretty terrible. The alternative I am now trying is Routing and Remote Access (RRAS): I have set up a virtual network called 'Internal' and REAL1 has a virtual network adapter connected to this virtual network I have connected each of the virtual servers to this network too I have assigned each server static IP addresses on this virtual network (REAL1 has 10.1.1.1, VIRTUAL1 has 10.1.1.2 and VIRTUAL2 has 10.1.1.3) I have installed RRAS and set up a NAT. The external interface is the external NIC, the internal interface is the virtual NIC connected to the internal network I have assigned all the available external IP addresses to the external NIC on REAL1. The virtual servers have been set up appropriately such that their default gateway is pointing to 10.1.1.1 and they can both access externally. Success! The RRAS is routing packets. The problem I have is that when I try to port forward services from the external IP address on REAL1, it only works if there is not already a service bound to the port. Remote desktop 'greedily' binds to every available IP address on port 3389 on REAL1 so I can't selectively forward incoming traffic for 1.2.3.5:3389 to 10.1.1.2:3389. RRAS will allow me to set up this port forwarding, and no errors come up. It just doesn't work. So the question I have is: Is there a better way of doing this? Or at least is there a way of resolving the apparant conflict between RRAS and everything else on the physical server?

  Read the article

• IIS6 Log time recording problems

  - by Hafthor

  On three separate occasions on two separate servers at nearly the same times, 6.9 hours seemingly went by without any data being written to the IIS logs, but, on closer inspection, it appears that it was all recorded all at once. Here's the facts as I know them: Windows Server 2003 R2 w/ IIS6 Logging using GMT, server local time GMT-7. Application was still operating and I have SQL data to prove that Time gaps appear in log file, not across two # headers appear at gap Load balancer pings every 30 seconds No caching Here's info on a particular case: an entry appears for 2009-09-21 18:09:27 then #headers the next entry is for 2009-09-22 01:21:54, and so are the next 1600 entries in this log file and 370 in the next log file. about half of the ~2000 entries on 2009-09-22 01:21:54 are load balancer pings (est. at 2/min for 6.9hrs = 828 pings) then entries are recorded as normal. I believe that these events may coincide with me deploying an ASP.NET application update into those machines. Here's some relevant content from the logs in question: ex090921.log line 3684 2009-09-21 17:54:40 GET /ping.aspx - 80 404 0 0 3733 122 0 2009-09-21 17:55:11 GET /ping.aspx - 80 404 0 0 3733 122 0 2009-09-21 17:55:42 GET /ping.aspx - 80 404 0 0 3733 122 0 2009-09-21 17:56:13 GET /ping.aspx - 80 404 0 0 3733 122 0 2009-09-21 17:56:45 GET /ping.aspx - 80 404 0 0 3733 122 0 #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2009-09-21 18:04:37 #Fields: date time cs-method cs-uri-stem cs-uri-query s-port sc-status sc-substatus sc-win32-status sc-bytes cs-bytes time-taken 2009-09-22 01:04:06 GET /ping.aspx - 80 404 0 0 3733 122 3078 2009-09-22 01:04:06 GET /ping.aspx - 80 404 0 0 3733 122 109 2009-09-22 01:04:06 GET /ping.aspx - 80 200 0 0 278 122 3828 2009-09-22 01:04:06 GET /ping.aspx - 80 200 0 0 278 122 0 2009-09-22 01:04:06 GET /ping.aspx - 80 200 0 0 278 122 0 ... continues until line 5449 2009-09-22 01:04:06 GET /ping.aspx - 80 200 0 0 277 122 0 <eof> ex090922.log #Software: Microsoft Internet Information Services 6.0 #Version: 1.0 #Date: 2009-09-22 00:00:16 #Fields: date time cs-method cs-uri-stem cs-uri-query s-port sc-status sc-substatus sc-win32-status sc-bytes cs-bytes time-taken 2009-09-22 01:04:06 GET /ping.aspx - 80 200 0 0 277 122 0 2009-09-22 01:04:06 GET /ping.aspx - 80 200 0 0 277 122 0 ... continues until line 367 2009-09-22 01:04:06 GET /ping.aspx - 80 200 0 0 277 122 0 2009-09-22 01:04:30 GET /ping.aspx - 80 200 0 0 277 122 0 ... back to normal behavior Note the seemingly correct date/time written to the #header of the new log file. Also note that /ping.aspx returned 404 then switched to 200 just as the problem started. I rename the "I'm alive page" so the load balancer stops sending requests to the server while I'm working on it. What you see here is me renaming it back so the load balancer will use the server. So, this problem definitely coincides with me re-enabling the server. Any ideas?

  Read the article

• IIS 7.5 Error 1007

  - by darkdog

  I have a Windows 2008 R2 Virtual Server. I removed the "Default Web Site" using IIS Manager and now all my other sites now report an error saying they can't access the site (or something similar). I thought I could just remove the role, re-install IIS again and start with a clean slate. After I re-installed IIS it's now reporting the following error in the event log: The World Wide Web Publishing Service (WWW service) failed to register the URL prefix of "http://www.mash-guild.com:80:192.168.245.132/" for the website of "4". The required network connectivity may already be used. The site has been disabled. The data field contains the error number. This is the full version with the german error note (I'm from germany): Der WWW-Publishingdienst (WWW-Dienst) konnte das URL-Präfix "http://www.mash-guild.com:80:192.168.245.132/" für die Website "4" nicht registrieren. Die erforderliche Netzwerkverbindung wird möglicherweise bereits verwendet. Die Website wurde deaktiviert. Das Datenfeld enthält die Fehlernummer. Ereignis-XML: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-IIS-W3SVC" Guid="{05448E22-93DE-4A7A-BBA5-92E27486A8BE}" EventSourceName="W3SVC" /> <EventID Qualifiers="49152">1007</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2011-03-26T16:14:56.000000000Z" /> <EventRecordID>1435</EventRecordID> <Correlation /> <Execution ProcessID="0" ThreadID="0" /> <Channel>System</Channel> <Computer>WIN-DCJ8SN0QI5J</Computer> <Security /> </System> <EventData> <Data Name="UrlPrefix">http://www.mash-guild.com:80:192.168.245.132/</Data> <Data Name="SiteID">4</Data> <Binary>B7000780</Binary> </EventData> </Event> I would like to know if there is a way to fix this or just get back to the IIS + Server settings I had just after I installed windows 2008 ?

  Read the article

• Creating a dynamic lacp trunk from HP Procurve 2412zl to Proliant DL380 G7

  - by Maalobs

  I'm configuring an IEEE 802.3ad (LACP) dynamic trunk from a HP Procurve 2412zl (firmware version K.15.07) switch to a HP Proliant DL380 G7 server. The DL380 has 4 NICs and is running Win2008 R2, so I'm teaming the NICs together and leaving everything on the recommended "automatic" setting in the HP NIC configuration tool. The server is one of two, they'll be connected on interfaces F17-F20 and F21-F24 respectively on the switch. I need the servers in a separate VLAN, here is the configuration for the VLAN: vlan 10 name "Lab_Mgmt" untagged B2,F17-F24 ip address 172.22.71.3 255.255.255.0 tagged B21 exit There is a DHCP-relay into the VLAN 10 from another device beyond interface B21. The Advanced Traffic Management Guide says that in order to run a dynamic LACP trunk on another VLAN besides the DEFAULT_VLAN, you need to first enable GVRP and then use "forbid" to stop the interfaces from automatically joining DEFAULT_VLAN when the dynamic trunk is created. GVRP brings some other stuff with it that I don't want or need, so I disable it with "unknown-vlans disable" on all other interfaces. Here is how I do it: procurve-5412zl-1(config)# gvrp procurve-5412zl-1(config)# interface A1-A24,B1-B24,C1-C24,D1-D10,D13-D24,E1-E24, F1-F16,K1,K2 unknown-vlans disable procurve-5412zl-1(config)# vlan 1 forbid F17-F24 procurve-5412zl-1(config)# interface F17-F20 lacp active The result afterwards looks all successful: procurve-5412zl-1(config)# show trunks Load Balancing Method: L3-based (Default), L2-based if non-IP traffic Port | Name Type | Group Type ---- + -------------------------------- --------- + ------ -------- F17 | XYZTEAM3_NIC1 100/1000T | Dyn2 LACP F18 | XYZTEAM3_NIC2 100/1000T | Dyn2 LACP F19 | XYZTEAM3_NIC3 100/1000T | Dyn2 LACP F20 | XYZTEAM3_NIC4 100/1000T | Dyn2 LACP procurve-5412zl-1(config)# vlan 10 procurve-5412zl-1(vlan-10)# show lacp LACP LACP Trunk Port LACP Admin Oper Port Enabled Group Status Partner Status Key Key ---- ------- ------- ------- ------- ------- ------ ------ F17 Active Dyn2 Up Yes Success 0 0 F18 Active Dyn2 Up Yes Success 0 0 F19 Active Dyn2 Up Yes Success 0 0 F20 Active Dyn2 Up Yes Success 0 0 On the Proliant server, the NIC configuration Tool is also indicating that a 802.3ad dynamic trunk has been established. Everything should be good, but it isn't. The server is not getting an IP-address from the DHCP, which it does if I'm not enabling LACP. If I configure the server to a static IP-address on the VLAN 10 subnet, it can't even ping the switch IP-address, much less anything outside of the VLAN. The switch can't ping the server either. I did another attempt with F17-F20 tagged, and checking the box "Default Native Tag (VLAN 10)" in the NIC configuration tool on the server, but there was no difference. Does anyone have any idea what I might have missed?

  Read the article

• Windows 7 extremely slow login, exchange performance, printer enumeration, etc...

  - by Jeff

  Background: I have a fresh copy of Windows 7 Professional x64 on a Dell Latitude E6500. The laptop has 8GB RAM, 250GB drive, and all Intel peripherals (net/wifi/graphics). All available Windows updates, as well as hardware drivers are installed. The IT folks where I work joined the computer to our Windows 2003-based Active Directory domain. There are no errors in any logs that we've looked at, and Group Policy templates appear to have applied properly. Problem: Every time I turn on or reboot the computer, it takes between 2 to 10 (all times are actual) minutes after successfully typing my username/password to get to my desktop. My login script does not always run. Sometimes I get a black screen, and a couple of minutes later the login script will pop up and take up to 10 minutes to complete. I can get around this by hitting cntrl-shift-esc and running explorer.exe from the Task Manager. The login script continues to hang, but I can minimize it and go on about my business. Either way, it generally throws errors prior to completing. I often get slow or failed connectivity to Exchange via Outlook. When I bring up printer dialogs, they take several minutes to populate, and block the calling app while doing so. Copies to SMB shares are very slow. On my home network, everything works fine. On both the work network and home network, I can use remote internet resources just fine. Web pages pull up, remote VPN's are fine, I can max out bandwidth on SpeakEasy Speed Test. I can get almost max bandwidth transferring FTP/HTTP over a LAN. Another symptom of the problem is that when I first log in, the work network shows as "Identifying" for a long time in the Network and Sharing Center, and will often then change to the name of the work domain, but say "Unauthenticated Network". Note that this computer previously ran Windows Vista with none of these problems. Attempts to Fix: Installed the Win7 admin pack Uninstalled/reinstalled all hardware drivers Verified Active Directory DNS settings (Vista works relatively well on the same network) Reset all TCP/IP settings on all adapters using the netsh commands to do so Disabled ipv6 on all adapters Disable wifi adapter while on work network Locked the network card to 100/Full, 1000/Full; also tried Auto Added various important addresses to hosts file (exchange, dns, ad) -- removed when didn't help My background is a jpeg (sounds unrelated but there is apparently a win7 login bug related to solid color background) More I have forgotten The IT staff at my company indicated they believe this is due to having Windows 2003 AD servers and not having any Windows 2008 R2 AD servers. Other than that, they have no advice or assistance to offer other than a rebuild (already tried that once with similar symptoms), or downgrade to Vista. Any thoughts out there?

  Read the article

• dhcp-snooping option 82 drops valid dhcp requests on 2610 series Procurve switches

  - by kce

  We are slowly starting to implement dhcp-snooping on our HP ProCurve 2610 series switches, all running the R.11.72 firmware. I'm seeing some strange behavior where dhcp-request or dhcp-renew packets are dropped when originating from "downstream" switches due "untrusted relay information from client". The full error: Received untrusted relay information from client <mac-address> on port <port-number> In more detail we have a 48 port HP2610 (Switch A) and a 24 port HP2610 (Switch B). Switch B is "downstream" of Switch A by virtue of a DSL connection to one of Switch A ports. The dhcp server is connected to Switch A. The relevant bits are as follows: Switch A dhcp-snooping dhcp-snooping authorized-server 192.168.0.254 dhcp-snooping vlan 1 168 interface 25 name "Server" dhcp-snooping trust exit Switch B dhcp-snooping dhcp-snooping authorized-server 192.168.0.254 dhcp-snooping vlan 1 interface Trk1 dhcp-snooping trust exit The switches are set to trust BOTH the port the authorized dhcp server is attached to and its IP address. This is all well and good for the clients attached to Switch A, but the clients attached to Switch B get denied due to the "untrusted relay information" error. This is odd for a few reasons 1) dhcp-relay is not configured on either switch, 2) the Layer-3 network here is flat, same subnet. DHCP packets should not have a modified option 82 attribute. dhcp-relay does appear to be enabled by default however: SWITCH A# show dhcp-relay DHCP Relay Agent : Enabled Option 82 : Disabled Response validation : Disabled Option 82 handle policy : append Remote ID : mac Client Requests Server Responses Valid Dropped Valid Dropped ---------- ---------- ---------- ---------- 0 0 0 0 SWITCH B# show dhcp-relay DHCP Relay Agent : Enabled Option 82 : Disabled Response validation : Disabled Option 82 handle policy : append Remote ID : mac Client Requests Server Responses Valid Dropped Valid Dropped ---------- ---------- ---------- ---------- 40156 0 0 0 And interestingly enough the dhcp-relay agent seems very busy on Switch B, but why? As far as I can tell there is no reason why dhcp requests need a relay with this topology. And furthermore I can't tell why the upstream switch is dropping legitimate dhcp requests for untrusted relay information when the relay agent in question (on Switch B) isn't modifying the option 82 attributes anyway. Adding the no dhcp-snooping option 82 on Switch A allows the dhcp traffic from Switch B to be approved by Switch A, by virtue of just turning off that feature. What are the repercussions of not validating option 82 modified dhcp traffic? If I disable option 82 on all my "upstream" switches - will they pass dhcp traffic from any downstream switch regardless of that traffic's legitimacy? This behavior is client operating system agnostic. I see it with both Windows and Linux clients. Our DHCP servers are either Windows Server 2003 or Windows Server 2008 R2 machines. I see this behavior regardless of the DHCP servers' operating system. Can anyone shed some light on what's happening here and give me some recommendations on how I should proceed with configuring the option 82 setting? I feel like i just haven't completely grokked dhcp-relaying and option 82 attributes.

  Read the article

• Random servers in Citrix servers suddenly bluescreens (mostly 0x0000008e and 0x0000007e)

  - by Rasmus Rask

  I'm responsible for a Citrix Presentation Server 4.5 farm. Starting Friday 30. November, my servers started to crash randomly. So far we've experienced 80 crashes, so it's obviously becoming an increasingly big problem for us. I have 12+ years experience with IT, so I know the difference between 0 and 1, but I have a hard time cracking this. We've rolled back any recent changes I can think of for different groups of servers, but all groups still seem to crash. I don't have the skills to interpret the memory dumps to find the culprit. Has anyone encountered the same or a similar problem? - might be a generic Windows issue Other than executing "analyze -v" in WinDbg, how do I work my way through the memory dumps to see what actually triggered the BSOD? Any suggested steps in getting to the bottom of this? Any help is greatly appreciated. I can also provide links to kernel memory dumps or WinDbg output if necessary. Thanks! Problem description The majority of the STOP errors we encounter are: 0x0000008e KERNEL_MODE_EXCEPTION_NOT_HANDLED (50%) 0x0000007e SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (26%) 0x00000050 PAGE_FAULT_IN_NONPAGED_AREA (21%) We also see a few 0x0000000a IRQL_NOT_LESS_OR_EQUAL (3%). For both 0x0000008e and 0x0000007e bug checks, the exception code is 0xc0000005 (Access Violation). When opening dump files in WinDbg, most details are exactly the same, for all the 0x0000008e and 0x0000007e bug checks respectively: 0x0000008e Exception address: 0x808bc9e3 Trap frame: [varies] FAILURE_BUCKET_ID: 0x8E_nt!HvpGetCellMapped+97 Probably Caused by (IMAGE_NAME): ntkrpamp.exe 0x0000007e Exception address: 0x808369b6 Exception record address: 0xf70d3be0 Context record address: 0xf70d38dc FAILURE_BUCKET_ID: 0x7E_nt!MmPurgeSection+14 Probably Caused by: memory_corruption About 30% of the crashes happens between 17:00 and 19:00, which leads me to believe this tend to happen more often during logoffs. But then again, only ~15% occurs between 15:00 and 17:00. Summary of farm Citrix Presentation Server 4.5 R06 on Windows Server 2003 R2 SP2 All high priority patches, at least as of October installed Virtualized using VMWare ESX/vSphere 4.1 on HP Proliant BL460c G6 blade servers About 53 Presentation Servers in production, divided into three silos - only one of which, the largest, is affected 2 vCPU's (5 GHz reserved), 8 GB RAM (all reserved) for each Presentation Server Plenty of free disk space Very few printer drivers - automated deletion of non-approved drivers every night ~1.000 peak concurrent users, which is reached at around 10:30 (on weekdays) Number of sessions steadily decline between 15:00 and 19:00 to ~230

  Read the article

• WSUS appears to be functioning, however errors are reported in Application Log (DSS Authentication W

  - by Richard Slater

  I re-installed WSUS a few months ago on a new server as part of a server hardware refresh. It is functioning normally downloading, authorizing and supplying patches to workstations. System Specification: HP DL360 G5 Quad 2.5 Zeon 6GB RAM Not Virtualized WSUS 3.2.7600.3226 SQL 2005 Express Windows 2003 R2 SP2 WSS SSL Enabled Every six hours five events are logged to the Application Event Log: Source | Category | ID | Description -------------------------------------------------------------------------------------- Windows Server Update Services | Web Services | 12052 | The DSS Authentication Web Service is not working. Windows Server Update Services | Web Services | 12042 | The SimpleAuth Web Service is not working Windows Server Update Services | Web Services | 12022 | The Client Web Service is not working Windows Server Update Services | Web Services | 12032 | The Server Synchronization Web Service is not working Windows Server Update Services | Web Services | 12012 | The API Remoting Web Service is not working In addition the following .NET Stack Trace is logged in C:\Program Files\Update Services\LogFiles\SoftwareDistribution.log each stack trace is identical except for the names of the services: 2009-11-27 11:56:52.757 UTC Error WsusService.10 HmtWebServices.CheckApiRemotingWebService ApiRemoting WebService WebException:System.Net.WebException: The request failed with HTTP status 403: Forbidden. at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) at Microsoft.UpdateServices.Internal.ApiRemoting.Ping(Int32 pingLevel) at Microsoft.UpdateServices.Internal.HealthMonitoring.HmtWebServices.CheckApiRemotingWebService(EventLoggingType type, HealthEventLogger logger) at Microsoft.UpdateServices.Internal.HealthMonitoring.HmtWebServices.CheckApiRemotingWebService(EventLoggingType type, HealthEventLogger logger) at Microsoft.UpdateServices.Internal.HealthMonitoring.HealthMonitoringTasks.ExecuteSubtask(HealthMonitoringSubtask subtask, EventLoggingType type, HealthEventLogger logger) at Microsoft.UpdateServices.Internal.HealthMonitoring.HmtWebServices.Execute(EventLoggingType type) at Microsoft.UpdateServices.Internal.HealthMonitoring.HealthMonitoringTasks.Execute(EventLoggingType type) at Microsoft.UpdateServices.Internal.HealthMonitoring.HealthMonitoringThreadManager.Execute(Boolean waitIfNecessary, EventLoggingType loggingType) at Microsoft.UpdateServices.Internal.HealthMonitoring.RemotingChannel.PrivateLogEvents() at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs) at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg, Int32 methodPtr, Boolean fExecuteInContext) at System.Runtime.Remoting.Messaging.ServerObjectTerminatorSink.SyncProcessMessage(IMessage reqMsg) at System.Runtime.Remoting.Lifetime.LeaseSink.SyncProcessMessage(IMessage msg) at System.Runtime.Remoting.Messaging.ServerContextTerminatorSink.SyncProcessMessage(IMessage reqMsg) at System.Runtime.Remoting.Channels.CrossContextChannel.SyncProcessMessageCallback(Object[] args) at System.Runtime.Remoting.Channels.ChannelServices.DispatchMessage(IServerChannelSinkStack sinkStack, IMessage msg, IMessage& replyMsg) at System.Runtime.Remoting.Channels.SoapServerFormatterSink.ProcessMessage(IServerChannelSinkStack sinkStack, IMessage requestMsg, ITransportHeaders requestHeaders, Stream requestStream, IMessage& responseMsg, ITransportHeaders& responseHeaders, Stream& responseStream) at System.Runtime.Remoting.Channels.BinaryServerFormatterSink.ProcessMessage(IServerChannelSinkStack sinkStack, IMessage requestMsg, ITransportHeaders requestHeaders, Stream requestStream, IMessage& responseMsg, ITransportHeaders& responseHeaders, Stream& responseStream) at System.Runtime.Remoting.Channels.Ipc.IpcServerTransportSink.ServiceRequest(Object state) at System.Runtime.Remoting.Channels.SocketHandler.ProcessRequestNow() at System.Runtime.Remoting.Channels.SocketHandler.BeginReadMessageCallback(IAsyncResult ar) at System.Runtime.Remoting.Channels.Ipc.IpcPort.AsyncFSCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOverlapped) at System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP) So far I have tried the following: Ensuring the settings were accurate as per TechNet. Checked that there was a suitable binding to 127.0.0.1 binding in IIS. Gone through and checked the settings in IIS as per TechNet. I have discovered that you can run the command wsusutil checkhealth to force the healt check to run, wsusutil can be found in C:\Program Files\Update Services\Tools. When this executese it will tell you to check the application log.

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >