Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 143/286 | < Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >

• Chain Gateways on the LAN

  - by Black2night

  I installed m0n0wall in a virtualized environment, i have 10 PCs connected to a router ( 192.168.1.0/24) which connect them to the internet through PPPoE, the problem is that this router does not have a QoS so what i want to do is the following :- let all the PCs get their IP from the Router and the default gateway will be m0n0wall the moon wall will have 2 interface (Lan 192.168.1.20) and (Wan 192.168.1.21 and default gateway 192.168.1.1) now when any PC want to access the internet it should go through m0n0wall and then m0n0wall will forward the connection to the default gateway through the wan interface which is the PPPoE running on the router (192.168.1.1) the big question is this scenario possible or not and what do you suggest? Thanks

  Read the article

• Is there a simple way to detect ISP port blocking?

  - by Will M

  Is there a way to tell the difference between my ISP blocking traffic on certain ports and my NAT router/firewall blocking that traffic? The sites “Shields Up” and “Can you see me” show my ports closed or not accessible, but I assume that is primarily due to the NAT router. (Obviously, I could just remove the router, connect directly and use those sites, but is there a simple way to test without doing that?)

  Read the article

• How do I revert back to official Linksys firmware from dd-wrt on WRT56G2 v1?

  - by Chris Moore

  I've been having trouble with dd-wrt on my Linksys WRT56G2 v1 router and want to go back to the stock Linksys firmware for it. The router has only 2MB of flash memory, and so I'm running the 'micro' version of dd-wrt. My question is what is the best way to do that? I could use the http://router/Upgrade.asp dd-wrt "firmware upgrade" web interface to do it, in which case there's a dropdown menu choice for "After flashing, reset to": "don't reset" or "reset to default settings". Which should I pick? Some people say that I should use a program called tftp.exe instead. I can probably gain access to a Windows machine if this is necessary. Which of these is the way to proceed? I don't want to brick the router if at all possible! Note: I used the 'wrt54g' tag because I wasn't allowed to create a 'wrt54g2' tag due my low rep here.

  Read the article

• ARP replies contain wrong MAC address

  - by Jayen

  I've got a robot running linux with wired and wireless adapters. When I boot up, it connects to the wireless fine. When I assign an IP to the wired (either statically or with DHCP), it looks like it works. As in, ifconfig shows a proper IP and route shows proper routes. However, when I do an ARP request of the wired IP, the ARP reply contains the wireless MAC. ??? There's no bridge running on the robot, so why don't I get the wired MAC??? When the wire is disconnected, the wired IP replies to ping... Why is the robot replying over the wireless interface to IP requests on the wired???

  Read the article

• How can I stop Windows DNS server properties settings from changing by themselves?

  - by paradroid

  When I open the DNS console in Administrative tools, I keep finding a couple of problems which keep on reappearing by themselves, and I want to stop them from happening. One of the DNS servers has two network interfaces, and it should only be listening for requests on of them, and I get errors in the Event Log otherwise. But when right clicking one DNS server and selecting Properties, I can see on the Interfaces tab that 'All IP addresses' is selected. If I Change it to 'Only the following IP addresses:' and deleselect the WAN addess, I will find it reslected when I next check it after a couple of days. In the other DNS server's Properties, on the Forwarders tab, there should only be two forwarder addresses. However, the address for the router keeps in appearing. This router has the DNS server as its forwarder. There shouldn't be anything using the router's DNS forwarders for DNS other than the router itself, but this surely is causing a loop. How do I get these properties on both DNS servers to stick?

  Read the article

• Web browsing through SSH tunnel gets stuck/clogged

  - by endolith

  I use tools like Tunnelier to log into my home Tomato router through SSH, and then use it as a proxy for web browsing, tunnel for Remote Desktop/VNC, etc. Most days it works great, but some days every page I try to view gets stuck, like the tunnel is clogged. I load a web page and it seems to be loading, then stops, with the little loading icon spinning and nothing happening. I refresh the page, I reboot the router, I reboot the other computers on my home network and turn off any bandwidth-hogging services on them, I've turned on QoS on the router to prioritize SSH. I don't understand what's getting stuck. Rebooting or disconnecting/reconnecting the SSH tunnel improves responsiveness for a minute, but then it gets clogged again. It also seems to help if I don't do anything on the tunnel for a few minutes, then it will be responsive for a bit and then get clogged again. Trying to open a terminal console from Tunnelier is also unresponsive, so it's not just a web browsing problem. Likewise, connecting to http://192.168.1.1 in the browser (to the router's web config through its own tunnel) is also slow/laggy/halting. The realtime bandwidth reported by the router is nowhere near my DSL connection's limits, though it does show big spikes during the laggy times, and the connection is responsive when it shows low bandwidths. How do I troubleshoot something like this?

  Read the article

• Simple vLAN setup

  - by Logan Bissonnette

  I have a basic lab environment set up to try and get 2 vLANs working in hyper-v. I have the following equipment 1 hyper-v server 1 Desktop PC 1 Managed Switch (d-link DES-3052P) 1 cheap router (DI-604) My end goal is to have 1 VM and the desktop on one vLAN with internet, and 1 VM on a separate vLAN with internet access. I am having troubles getting an internet connection to both vLANs. The switch does not have the ability to have asynchronous vLANs. This is my switch configuration Port 1 - Trunk Port - Connected to router Port 2 - Trunk Port - Connected to hyper-v Server Port 3 - Access Port- Connected to Desktop Within hyper-v I have 1 switch and 2 VMs. When the VMs are set up to use vlan ID 1, everything works fine. As soon as a VM is set up to use vlan ID 2, they lose all network connection and cannot communicate with the router anymore. I believe this is because the router is not vLAN aware. Can anyone help me with what settings need to be set up on my switch? I believe I want an egress rule so traffic leaving towards the router is untagged, is that right? If not, any ideas or hints as to what needs to be set up?

  Read the article

• Setting up Dependencies for Nagios

  - by hfranco

  I'm trying to setup dependencies for a router and several servers. What I want to do is setup the router as the Master Host so if the router fails all other services on the servers won't alert. Unfortunately this is easier said than done. Is there an easy way to setup service dependencies for all services on a server for a Master Host (or my router)? Nagios has some documentation but it will be extremely time consuming to add a single service dependency definition for every service. http://nagios.sourceforge.net/docs/3_0/objectdefinitions.html#servicedependency

  Read the article

• RouterLess, house-wired network using multiple powerline adapters

  - by Cliff Arnell

  related to the 'old days' of one ethernet cable tapped with Ts for each monitor.... my question might be very simple... or not. I have an over-the-air internet provider with a wire dish with a powered transceiver and cat5 cable out of the providers supplied modem. I'm presently connecting the output of the modem into my wireless router which sends the internet signal all over the house. Standard stuff, I believe. My Question. Can I just connect the output of the modem into 1 powerline adapter and tie all my equipment such as computer, printer, laptop, Tivo recorder, etc. into 1-each local powerline adapters located near each devices resulting in a 'house-wired' network and no router? I'm bothered by the idea that my over-the-air provider might be using something in my router to establish and keep my IP connection alive. I did have to configure the router for my IP, a router which, in my proposed scenario, would no longer exist. Thank you for your help.

  Read the article

• Is it safe to use a single switch for multiple subnets?

  - by George Bailey

  For a moment, forget about whether the following is typical or easy to explain, is it safe and sound? Internet | ISP supplied router x.x.x.1 (public subnet) | switch-------------------------------------+ | (public subnet) | (public subnet) BVI router (switch with an access list) NAT router | (public subnet) | (private subnet 192.168.50.1) +--------------------------------switch----+ (both subnets) | | computer with IP 192.168.50.2 ------+ +----computer with IP x.x.x.2 I don't plan to implement this setup, but I am curious about it. The 50.2 computer may send a packet to the x.2 computer, but it will use 50.1 as the router, since 50.2 knows that the subnet is different. Would this result in the packet being received twice by the x.2 machine, first directly through the switch, second by way of the two routers? Do you see any problems with this aside from how confusing it is, and that it would put one switch doing the work of two subnets?

  Read the article

• How do I add client computers to a Windows SBS 2008 domain?

  - by Jonas

  We have a LAN and the router is the DHCP server. We have a server with Windows SBS 2008, it has the IP address 192.168.1.2 while the router has the IP address 192.168.1.1. I have set "DNS Relay" on the router to 192.168.1.2. I have tried to add a client computer to the SBS domain by visiting http://connect from the client computer. But that page doesn't exist. I can visit http://192.168.1.2/ then the default startpage for IIS7 is shown. I'm logged in as a local Administrator on the computer that I tries to add to the domain. How do I add the client computer to the SBS 2008 domain? The router is an D-Link DFL 200, and I have now set the "DNS Relay" to "Use address of LAN interface" instead of a specific IP-address. But it doesn't work.

  Read the article

• Pinging computer name in LAN results in public IP?

  - by Bob

  Hi, I recently introduced a new machine to my LAN. The computer name for this machine is 'server'. Historically I've been able to access machines from my home network (from a web browser or RDP) using the machine name and it resolves to a local IP address just fine. However, I can't seem to do this anymore. When I ping the computer name, I get the following: C:\Users\Robert>ping server Pinging server.router [67.215.65.132] with 32 bytes of data: Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 Reply from 67.215.65.132: bytes=32 time=23ms TTL=54 Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 Reply from 67.215.65.132: bytes=32 time=24ms TTL=54 I notice also that it appends the 'router' suffix to my domain name for some reason. 'router' is the name of my router, obviously. I'm also using OpenDNS as my DNS provider (configured through my router so it gets passed down through DHCP). Why is this not working for me? Can someone explain how the DNS resolution should take place? For LAN resolution, it shouldn't go straight to OpenDNS. I thought that each Windows machine kept it's own sort of "mini DNS server" that knows about all machines on the local network and it first tries to resolve using that. Please let me know what I can do to get this working!

  Read the article

• How to connect a remote IP Phone to our VOIP Network?

  - by Mistiry

  We have an IP phone system in our office, and about 8 VoIP phones running on the system. We have a remote worker, who is literally states away. We'd like to connect his phone to our VoIP network, so that he has a business phone and an extension to which we could transfer calls. I was thinking, although I don't know for sure, that a pair of Cisco routers could be used in some way to make this work. I imagine a VPN solution, where I have one router connected to the phone network and the other router connected to the remote phone. Then have a site-to-site VPN set up so that the remote router... And that's where I'm stuck. I know the remote router will need to use the DHCP server of the phone system. I've never set up something like this, so I am seeking the help of the community here. What is the best way to get this remote VoIP phone RELIABLY connected to our internal VoIP network?

  Read the article

• How do I turn on bluetooth on a Dell Latitude E6410?

  - by Rob Stevenson-Leggett

  I have recently acquired a Dell Latitude E6410. It's great but I can't get Bluetooth to work. I have enabled bluetooth for the Wireless Switch in the BIOS. However whenever I try and install the bluetooth driver from the CD I get the message: Activate Bluetooth using the Wireless Switch. There is only a cancel button on this dialog. There is no bluetooth icon on any function key and I have tried switching the what I assume to be the Wireless Switch (the switch which controls wireless internet, on the right side of the laptop) to on and off positions to no avail. Does anyone know what the problem is?

  Read the article

• How to fix unstable RJ45 jacks? [closed]

  - by BeemerGuy

  This is a little project I'm doing at home. I wanted to wire two rooms together (basically, the router is one room, and the switch is in the second room). So I ran a CAT5 between the two rooms, and wired an RJ45 jack in each room. I then hooked up the two jacks with two CAT5 cable to run it through the cable tester, and all 8 wires seem good. Now, when I connect the switch and the router, the connection is unstable -- I ping the router and it barely holds on for two pings before it disconnects, and stays in that unstable state. Just to make sure the router and the switch are ok, I connected them with long wire between the two rooms and the connection is absolutely stable, and pings continuously. What could be the cause for the unstable connection? Especially that it pings a few times, so there IS a connection. But why is it unstable? And how come the cable tester says it's ok, but it's unstable?

  Read the article

• port forwarding using 3 static ip addresses

  - by Danny

  I am new to configuring routers. We have purchased a RV016 Cisco business router that has multiwan capability. What we are attempting to do is take map services from 3 different servers and assign 3 different static IP addresses and then forward port 80 through the router. A short term solution to building a proxy server. Is this possible? Right now we have a consumer grade Cisco router and assign a static IP and it works, we attempted the same settings on the business router and cannot get to the internet. We set it DHCP and it works fine, however we want to to forward the static ports not use DHCP.

  Read the article

• Problem connecting to Ubuntu Server in same local network.

  - by frbry

  I have my LAN set up as below: 192.168.2.1: ADSL Router (DHCP Range: 192.168.2.2-192.168.2.250) 192.168.2.254: Wireless Access Point 192.168.2.253: Ubuntu Server (Static IP) 192.168.2.2: My Laptop (Connects to Internet via the Wireless AP) NAT in router is active and set up to transfer requests made over port 80 to 192.168.2.253. Router's firewall is inactive. No IPs in DMZ. My friends get Apache's It Works page when they try to enter http://my_external_ip. But I get Router's configuration page instead of that. What should I check or do? Thanks.

  Read the article

• Can I use two internet connections simultaneously in Windows 7?

  - by Chibueze Opata

  I have two internet connections - one via a 3G modem, and the other via wireless. The modem is faster so I normally browse with it, but it does not support torrent downloads while my wireless does. When the two are connected, my PC automatically makes every connection through the modem. Is there a way I can force a particular program, eg. uTorrent to browse through my wireless internet connection instead? Thanks.

  Read the article

• Enterprise laptop doesn't recognize WiFi

  - by Michiel

  My cousin is using an enterprise laptop for home work, but for some reason she can't connect to her home WiFi. The laptop isn't able to detect any WiFi networks, although she used to be able to detect and connect to the network. Whenever I troubleshoot for possible issues, Windows Vista is telling me the switch for wireless reception is turned off, but I'm sure it's turned on (If I turn it on, the HP Wireless Assistant tells me it's turned on, so...). But if I take a look at the settings, I get this message (sorry it's in Dutch): So for some reason, the WLAN reception is deactivated and I cannot activate this... Does this have something to do with the laptop being an enterprise laptop? Or is there a simple setting I missed? The most recent driver of the Wireless Network Card (Intel Wireless 5100) is installed.

  Read the article

• VM clients can not access WAN

  - by Saariko

  I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

  Read the article

• How to connect laptop with telephone using WI-FI? (ethernet)

  - by rmaster

  What I did: 1)added new wireless network in wireless network settings and gave it SSID 2)gave laptop the IP like 192.168.0.1, mask: 255.255.255.0, gateway: 192.168.0.2 3)gave the telephone with wifi the same mask but IP and gateway rewersed But telephone can not find my new wireless network(it can find all other networks), computer also can not find it. where is error? how to make it visible and working? if my steps are wrong tell me correct way to establish this connection via wi-fi

  Read the article

• How can I port forward over a VPN NAT?

  - by Charlie

  I have a multi-site VPN currently running with pfSense boxes and currently using OpenVPN. However I can change the OS and VPN type if need be. The main router has a 10.13.0.0/16 subnet and a series of public IPs For example, a branch has a 10.12.1.0/24 subnet How can I port forward NAT traffic on a public IP of the main router to a server behind the NAT of the second? So for instance port 95 on a public IP assigned to the main router forwards to 10.12.1.102 on the other router. Is this even possible? Currently my setup works great but only for intertnal traffic

  Read the article

• How to configure a static wildcard subdomain with dnsmasq.

  - by Prody

  I have a network behind a NAT with a few machines. The machines are: router - NAT, dnsmasq, forwarding - directly connected to the inet server - which runs ssh, www and some other stuff clients - which do stuff on server I also have mydomain.com. server.mydomain.com is pointing to my connection's IP (single IP), which is the router, which forwards ports to server. Server, has a httpd running, which serves different sites based on vhosts. So I have site1.server.mydomain.com, site2.. The problem is that all the traffic is going thru the router, and when I check logs I always see the router's IP for everything (so it's hard to see who is running the script with the while(1)). I would just ServerAlias site1.server.local, but most of the sites have a root URL saved somewhere on top of which other URLs are built, so I can't do that. The solution for me would be telling dnsmasq somehow to answer to *.mydomain.com with server's IP. Is this possible somehow?

  Read the article

• Win 2008 Server configuration

  - by user123790

  Let me preface my question by saying I'm a novice in regards to server configuration. It's been 12+ years since I've attempted this. What we (our small office) are trying to achieve is to setup a Win 2008 server (located in a home) in a home network configuration (basic wireless router w/DHCP) that we (the office) can VPN to from our office. I have installed the software, installed DHCP, removed DHCP from the router, set the scope for 100 IPs and am now looking for information as to where I go from here? I believe I need to configure DNS and possibly set up static routes on the router for the home devices that need internet? The wireless clients are not receiving IPs is the current issue that I'd like to tackle. Also, would it be feasible to use the router's DHCP to assign IPs rather than having the server do it? If so, what would be the most direct way to accomplish this? I appreciate any help in this matter. Thanks

  Read the article

• How to configure something like "Reflexive ACL" on OpenBSD?

  - by Earlz

  My U-Verse modem has something called "Reflexive ACL" described as Reflexive ACL: When IPv6 is enabled, you can enable Reflexive Access Control Lists to deny inbound IPv6 traffic unless this traffic results from returning outgoing packets (except as configured through firewall rules). This seems like a pretty good way to keep from having to maintain a firewall on each computer behind my router that gets handed an IPv6 address. It sounds about like a NAT, which for my small home network is all I want right now. Now my modem sucks as a router though, so I'm in the process of configuring an OpenBSD router to do that. I've got IPv6 supported and all that and my OpenBSD router will hand out IPv6 addresses by rtadvd. Now I want to keep people from having instant access to my local network through IPv6. How would I best do something like Reflexive ACL with pf in OpenBSD 5.0?

  Read the article

< Previous Page | 139 140 141 142 143 144 145 146 147 148 149 150  | Next Page >