Search Results

Search found 4585 results on 184 pages for 'master subdocument'.

Page 144/184 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

  - by IcarusNM

  I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

  Read the article

• Can my machine run Ubuntu( kubuntu | xubuntu | mint ) 12.04 WELL?

  - by Steve

  I have a 9 year old computer packing the hardware listed below. My question is, can I run 12.04 ( Ubuntu, Kubuntu, MINT or Xubuntu ) WELL? I was running Ubuntu 10.10 and I upgraded to 12.04 by going through each release via the update manager: 11.04 - 11.10 -12.04 During the installation process for 12.04 I saw an error message that there was an error installing and setting up part of the kernel. Later, when I tried installing a package in synaptic, I got another error message mentioning the kernel. When I rebooted, I got told somehting about my video and graphics was not configured properly and that I would have to do it manually ( like I know ). It gave me the option to enter the system in low graphics mode, but it just hanged. I had an old livecd of Xubuntu 10.10 around so I used that to get into my computer and copy data over to an external hard drive. I think tried to install Xubuntu 10.10 from the livecd, with the option "download updates" checked. The install process moved along a bit, then halted for about 5 hours. I rebooted my machine and tried the Xubuntu 10.10 installer WITHOUT the option to "download updates". The install completed in about 15 minutes. So, all of that is making me wonder if there is someting about 12.04 that does not like my hardware. I'm willing to try again, but only if I know I will not have to spend hours just to get to an error message and a hosed up system like I did last night. I also think I have a lot more RAM than is being reported in the output below. I had extra ram installed last year. I'm not good with the command line readouts, but there seems like there should be a lot more. I wasn't thrilled with Unity. I am willing to try Kubuntu 12.04. Will I run into the same problems? What is the highest version of a *ubuntu can I upgrade to? Thanks CPU Model: Intel(R) Pentium(R) 4 CPU 2.53GHz Frequency: 2533.223 MHz L2 Cache: 512 KB Bogomips: 5066.44 Numbering: family(15) model(2) stepping(7) Flags: fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe up pebs bts cid RAM ~$ free -mt total used free shared buffers cached Mem: 1506 891 615 0 91 521 -/+ buffers/cache: 278 1227 Swap: 1609 0 1609 Total: 3116 891 2225 Video Card 01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. V9180 Magic Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16 Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Memory at f0000000 (32-bit, prefetchable) [size=64M] Expansion ROM at fe9e0000 [disabled] [size=128K] Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb Motherboard Intel 845PE ATX 533FSB DDR333 USB2

  Read the article

• MOSSt 2010 Hosting :: Dialog Platform in SharePoint 2010 & How to Open the Edit Form Dialog for List Item

  - by mbridge

  One of the New User Interface Platforms in SharePoint 2010 is ‘The Dialog Platform’ A dialog is essentially a <div> which gets visible on demand and renders the HTML using a background overlay creating a modal dialog like user experience. We can show an existing div from within the page or a different page using a URL inside the dialogs. When we pass the URL to the dialog it looks for the Querystring parameter “IsDlg=1”. If this parameters exists than it would dynamically load the "/_layouts/styles/dlgframe.css” file. This file overrides the “s4-notdlg” class items as “display:none”, which means that all items with this class would not get displayed in Dialog Mode.  So if we go to the v4.master page we can see that this class is used by the Ribbon control to hide the ribbon when in dialog mode: How to open the Edit Form Dialog for List Item: In SharePoint 2010 The URL for opening the Edit Form of any list item looks like something like this : http://intranet.contoso.com/<SiteName>/Lists/<ListName>/EditForm.aspx?ID=1&IsDlg=1 ID is the list item row identifier and as discussed above the IsDlg is for the dialog mode. Now to open a dialog we need to use the SP.UI.ModalDialog.showModalDialog method from the ECMAScript Client Object model and pass in the url of the page, width & height of the dialog and also a callback function in case we want some code to run after the dialog is closed. <script type="text/javascript">          //Handle the DialogCallback callback               function DialogCallback(dialogResult, returnValue){               }             //Open the Dialog           function OpenEditDialog(id){             var options = { url:&quot;http://intranet.contoso.com/<SiteName>/Lists/<ListName>/EditForm.aspx?ID=&quot; + id + &quot;&amp;IsDlg=1&quot;,              width: 700,              height: 700,              dialogReturnValueCallback: DialogCallback              };             SP.UI.ModalDialog.showModalDialog(options);           } </script> The .js files for the ECMAScript Object Model (SP.js, SP.Core.js, SP.Ribbon.js, and SP.Runtime.js ) are installed in the %ProgramFiles%\Common Files\Microsoft Shared\web server extensions\14\TEMPLATE\LAYOUTS directory. Here is a good MSDN link explaining the Client Object Model Distribution and Deployment options available in SharePoint 2010 and this is the lowest costSharePoint 2010 Provider.

  Read the article

• Recommended learning path?

  - by stairmast0r

  First, my current standing: I know C++ at an.. advanced beginner level? I've gone through a book, I know the syntax well enough, I know a fair amount of standard library functions, and I've programmed some simple console stuff with it. I'd probably be able to program more with it if I knew how to structure a program, but I just can't seem to wrap my head around the whole concept of structuring something remotely complex. I've messed around with Java for a day or two, and the syntax was extremely easy to get the hang of, except that I didn't really know any functions. I'm plenty willing to learn, and to work hard to do so, but I don't really know where to go from here. Now, at the risk of sounding cliche, what I'd like to become is someone like the great three of id; Carmack, Romero, and Abrash. To be considered a genius. I believe anything can be learned, and nothing mentally limits anyone except lack of desire to learn. But I don't know how to learn this. They learned by doing, and making do with what resources they had. On the other hand, I have access to almost any books I want, access to the internet, and access to a more than capable computer and software. Should I learn more languages? Assembly? LISP? BASIC? Haskell? Should I dive straight into advanced topics like OpenGL? Or should I wait until I feel I've come closer to mastering the simpler things, like console programs, first? Should I follow tutorials? Should I follow books? Should I just dive into writing something and follow a reference manual as I go? What order should I do all this in? How should I do it? I want to completely master this; to be considered a genius. The most perfect career I can imagine is to start the next id. I have the drive to do it, I just don't know where to begin...

  Read the article

• ????????????????

  - by Yusuke.Yamamoto

  ????·???? ?????:??????·?????? ~???????????Platinum???????????~ Pickup!:????????????????????? ???????|??????????|???????? ????????:?Oracle DB?????????????????????Windows?VMware?? ???? Oracle Technology Network, ????/????, ??IT???????·?????????????? View RSS feed ????? ????? Oracle?????????????????????????!???????????? View RSS feed ????? ???? ????????? Oracle Database ?????? ??????? ?????????(????????, ???, etc) ????????(???, REDO, ????????, etc) ????·????????????????? ????·?????????(??, etc) ????????????? ???????????????????·?????? ??????? ???? ????????·??SQL Server Windows Server ??????????PL/SQL|Java|.NET|PHP ??/??? ORACLE MASTER ???? DWH(?????????)??·?? ????? ?????(SAN, NAS, SSD, etc) ??·??????? Oracle Database Oracle Database 11g Release 2(11gR2) Oracle Database Standard Edition ????????: Advanced Compression ?????????: Advanced Security Application Express(APEX) Automatic Storage Management(ASM) SSD???Oracle???: Database Smart Flash Cache ??????????: Data Guard Data Pump Oracle Data Provider for .NET(ODP.NET) Partitioning(???????/?????????) DB????: Real Application Clusters(RAC) Real Application Testing Recovery Manager(RMAN) SQL*Loader|SQL*Plus|Statspack ??????|????????|???????? Amazon EC2|Microsoft Excel MSFC/MSCS(Microsoft Cluster Service) Exadata|Database Firewall SQL Developer ?????DB: TimesTen In-Memory Database Oracle Fusion Middleware Java Oracle Coherence Oracle Data Integrator(ODI) Oracle GoldenGate Oracle JRockit JVM Oracle WebLogic Server Oracle Enterprise Manager ????????????: Oracle Application Testing Suite Oracle Solaris DTrace|ZFS|???/???? Oracle VM Server for x86 ?????? ???????? ?????????Oracle???????????????·????????????????? ?????????(??·??????) Oracle Direct Seminar(?????????) OTN??????(??????) ???????(????????) Oracle University(??) ??????! View RSS feed ????? ?????? ????? ?????? ?????|?Sun?? ???????? OTN???????? OTN(????) ?????? ???? OTN???|???? OTN????? ?????? ?????? ???????? ???? ???????

  Read the article

• Cannot reactivate RAID-5 volume: The size of the plex member is invalid

  - by Ian Boyd

  We had a 3-drive Windows Server 2008 R2 RAID-5 fail (operating in redundancy mode): WDC 1 TB WDC 1 TB WDC 1 TB We removed the failed hard drive, and put a WDC 1 TB drive (that we had standing by) into the machine. When launched, Disk Manager, asked permission to "initialize" the disk as either: Master Boot Record (MBR) Guid Partition Table (GPT) We initialized the disk as GPT, converted it to dynamic, and tried to use the Repair Volume command - except it was greyed out. (which is a terrifying thing on a failed production server hosting 3 virtual servers) i tried from the diskpart command line tool. First we look for our RAID-5 volume that is in Failed Rd mode: DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 E VMs (Raid5) NTFS RAID-5 1863 GB Failed Rd Volume 1 D DVD-ROM 0 B No Media Volume 2 System Rese NTFS Partition 100 MB Healthy System Volume 3 C NTFS Partition 1862 GB Healthy Boot There, Volume 0. Make that our active context: DISKPART> select volume 0 Volume 0 is the selected volume. Now we need to find the disk we will be repairing the volume with: DISKPART> list disk Disk ### Status Size Free Dyn Gpt -------- ------------- ------- ------- --- --- Disk 0 Online 931 GB 0 B * Disk 1 Online 931 GB 931 GB * Disk 2 Online 1863 GB 0 B Disk 3 Online 931 GB 0 B * Disk M0 Missing 0 B 0 B * The disk with 931 GB free, Disk 1. Now we just need to repair the volume: DISKPART> repair disk=1 Virtual Disk Service error: The size of the plex member is invalid.

  Read the article

• Can't successfully run Sharepoint Foundation 2010 first time configuration

  - by Robert Koritnik

  I'm trying to run the non-GUI version of configuration wizard using power shell because I would like to set config and admin database names. GUI wizard doesn't give you all possible options for configuration. I run this command: New-SPConfigurationDatabase -DatabaseName "Sharepoint2010Config" -DatabaseServer "developer.pleiado.pri" -AdministrationContentDatabaseName "Sharepoint2010Admin" -DatabaseCredentials (Get-Credential) -Passphrase (ConvertTo-SecureString "%h4r3p0int" -AsPlainText -Force) Of course all these are in the same line. I've broken them down into separate lines to make it easier to read. When I run this command I get this error: New-SPConfigurationDatabase : Cannot connect to database master at SQL server a t developer.pleiado.pri. The database might not exist, or the current user does not have permission to connect to it. At line:1 char:28 + New-SPConfigurationDatabase <<<< -DatabaseName "Sharepoint2010Config" -Datab aseServer "developer.pleiado.pri" -AdministrationContentDatabaseName "Sharepoint 2010Admin" -DatabaseCredentials (Get-Credential) -Passphrase (ConvertTo-SecureS tring "%h4r3p0int" -AsPlainText -Force) + CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase: SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPExcep tion + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon figurationDatabase I created two domain accounts: SPF_DATABASE - database account SPF_ADMIN - farm account I'm running powershell console as domain administrator. I've tried to run SQL Management studio as domain admin and created a dummy database and it worked wothout a problem. I'm running: Windows 7 x64 on the machine where Sharepoint Foundation 2010 should be installed and also has preinstalled SQL Server 2008 R2 Windows Server 2008 R2 Server Core is my domain controller I've installed Sharepoint according to MS guides http://msdn.microsoft.com/en-us/library/ee554869%28office.14%29.aspx installing all additional patches that are related to my configuration. Any ideas what should I do to make it work?

  Read the article

• Windows 2000 uninstall on a dual-boot 2000/XP system

  - by Viktor

  While several questions have already been answered about removing an OS from a dual-booting machine, most refer to Windows 7 vs. Linux/Vista/XP. I have W2K installed on my older HDD (Drive C). Later on I bought a new HDD and installed XP's under W2K environment. Each time I turned my PC on, I had the choice of W2K or XP OS, which I still have. I eventually stopped using the w2k OS and as the older HDD where this OS is installed is getting old, I plan to remove it completely. The problem is that the active master boot record is on this very HDD. So when I remove the HDD, I get no OS loader, no matter what boot drive I choose in BIOS. Apparently I have to set the boot record on the newer HDD with XP's. Some advise to use the bootable XP CD and try to set the active MBR from there.. I don't have the CD anymore. Regardless, I suspect there is much less to solving this problem than running the recovery console, like a simple boot.ini file edit. But I might be wrong.

  Read the article

• NFS issue: clients can mount shares as NFSv3 but not as NFSv4 -- or how to debug NFS?

  - by tdn

  Problem description I have a file server running Debian. On it I have a few NFS shares. When I mount the shares from a client using NFSv3 (mount.nfs 10.0.0.51:/exports/video /mnt -o vers=3,soft,intr,timeo=10), it works. However, I would like to use NFSv4 because of improved security and performance. When I try to mount an NFSv4 share on malbec the mount command just hangs and finally times out after 2 minutes. How do I make the clients mount the NFSv4 shares as NFSv4? How do I troubleshoot NFS? There is no information in the syslog on neither client nor server. What are any errors in my configuration? Facts: Server is corvina(10.0.0.51) Client is malbec(10.0.0.1) Malbec runs Ubuntu 12.04 Server runs Debian 7 wheezy Both are connected through 1 GbE LAN. Firewalls are off. rpcinfo (root@malbec) (13-07-02 21:00) (P:0 L:1) [0] ~ # rpcinfo -p program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 4000 status 100024 1 tcp 4000 status (root@malbec) (13-07-02 21:00) (P:0 L:1) [0] ~ # rpcinfo -p corvina program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100024 1 udp 4000 status 100024 1 tcp 4000 status 100003 3 udp 2049 nfs 100227 3 udp 2049 100021 1 udp 4003 nlockmgr 100021 3 udp 4003 nlockmgr 100021 4 udp 4003 nlockmgr 100021 1 tcp 4003 nlockmgr 100021 3 tcp 4003 nlockmgr 100021 4 tcp 4003 nlockmgr 100005 1 udp 4002 mountd 100005 1 tcp 4002 mountd 100005 2 udp 4002 mountd 100005 2 tcp 4002 mountd 100005 3 udp 4002 mountd 100005 3 tcp 4002 mountd tcpdump The following is output from tcpdump on malbec while running this command: # rpcinfo -p corvina ~ # tcpdump -i eth0 host 10.0.0.51 21:14:51.762083 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [S], seq 3069120722, win 14600, options [mss 1460,sackOK,TS val 146111 ecr 0,nop,wscale 7], length 0 21:14:51.762431 IP corvina.vineyard.sikkerhed.org.sunrpc > malbec.vineyard.sikkerhed.org.948: Flags [S.], seq 770684199, ack 3069120723, win 14480, options [mss 1460,sackOK,TS val 398850 ecr 146111,nop,wscale 7], length 0 21:14:51.762458 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [.], ack 1, win 115, options [nop,nop,TS val 146111 ecr 398850], length 0 21:14:51.762556 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [P.], seq 1:45, ack 1, win 115, options [nop,nop,TS val 146111 ecr 398850], length 44 21:14:51.762710 IP corvina.vineyard.sikkerhed.org.sunrpc > malbec.vineyard.sikkerhed.org.948: Flags [.], ack 45, win 114, options [nop,nop,TS val 398850 ecr 146111], length 0 21:14:51.763282 IP corvina.vineyard.sikkerhed.org.sunrpc > malbec.vineyard.sikkerhed.org.948: Flags [P.], seq 1:473, ack 45, win 114, options [nop,nop,TS val 398850 ecr 146111], length 472 21:14:51.763302 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [.], ack 473, win 123, options [nop,nop,TS val 146111 ecr 398850], length 0 21:14:51.764059 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [F.], seq 45, ack 473, win 123, options [nop,nop,TS val 146111 ecr 398850], length 0 21:14:51.764454 IP corvina.vineyard.sikkerhed.org.sunrpc > malbec.vineyard.sikkerhed.org.948: Flags [F.], seq 473, ack 46, win 114, options [nop,nop,TS val 398850 ecr 146111], length 0 21:14:51.764478 IP malbec.vineyard.sikkerhed.org.948 > corvina.vineyard.sikkerhed.org.sunrpc: Flags [.], ack 474, win 123, options [nop,nop,TS val 146111 ecr 398850], length 0 The following is output from tcpdump on malbec while runing this command: ~ # time mount.nfs4 10.0.0.51:/ /mnt -o soft,intr,timeo=10 21:14:58.397327 IP malbec.vineyard.sikkerhed.org.872 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1298959870, win 14600, options [mss 1460,sackOK,TS val 147769 ecr 0,nop,wscale 7], length 0 21:14:58.397655 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.872: Flags [R.], seq 0, ack 1298959871, win 0, length 0 21:14:59.470270 IP malbec.vineyard.sikkerhed.org.854 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 4111013041, win 14600, options [mss 1460,sackOK,TS val 148038 ecr 0,nop,wscale 7], length 0 21:14:59.470569 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.854: Flags [R.], seq 0, ack 4111013042, win 0, length 0 21:15:01.506179 IP malbec.vineyard.sikkerhed.org.988 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1642454567, win 14600, options [mss 1460,sackOK,TS val 148547 ecr 0,nop,wscale 7], length 0 21:15:01.506514 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.988: Flags [R.], seq 0, ack 1642454568, win 0, length 0 21:15:05.542216 IP malbec.vineyard.sikkerhed.org.882 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 3844460520, win 14600, options [mss 1460,sackOK,TS val 149556 ecr 0,nop,wscale 7], length 0 21:15:05.542484 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.882: Flags [R.], seq 0, ack 3844460521, win 0, length 0 21:15:13.602228 IP malbec.vineyard.sikkerhed.org.969 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1317773588, win 14600, options [mss 1460,sackOK,TS val 151571 ecr 0,nop,wscale 7], length 0 21:15:13.602527 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.969: Flags [R.], seq 0, ack 1317773589, win 0, length 0 21:15:18.615027 ARP, Request who-has malbec.vineyard.sikkerhed.org tell corvina.vineyard.sikkerhed.org, length 46 21:15:18.615048 ARP, Reply malbec.vineyard.sikkerhed.org is-at cc:52:af:46:af:23 (oui Unknown), length 28 21:15:23.622223 IP malbec.vineyard.sikkerhed.org.1003 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 2896563167, win 14600, options [mss 1460,sackOK,TS val 154076 ecr 0,nop,wscale 7], length 0 21:15:23.622557 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.1003: Flags [R.], seq 0, ack 2896563168, win 0, length 0 21:15:28.629913 ARP, Request who-has corvina.vineyard.sikkerhed.org tell malbec.vineyard.sikkerhed.org, length 28 21:15:28.630223 ARP, Reply corvina.vineyard.sikkerhed.org is-at 00:9c:02:ab:db:54 (oui Unknown), length 46 21:15:33.662200 IP malbec.vineyard.sikkerhed.org.727 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1334644196, win 14600, options [mss 1460,sackOK,TS val 156586 ecr 0,nop,wscale 7], length 0 21:15:33.663657 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.727: Flags [R.], seq 0, ack 1334644197, win 0, length 0 21:15:43.698207 IP malbec.vineyard.sikkerhed.org.rsync > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 688828331, win 14600, options [mss 1460,sackOK,TS val 159095 ecr 0,nop,wscale 7], length 0 21:15:43.698541 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.rsync: Flags [R.], seq 0, ack 688828332, win 0, length 0 21:15:48.707710 ARP, Request who-has malbec.vineyard.sikkerhed.org tell corvina.vineyard.sikkerhed.org, length 46 21:15:48.707726 ARP, Reply malbec.vineyard.sikkerhed.org is-at cc:52:af:46:af:23 (oui Unknown), length 28 21:15:53.738188 IP malbec.vineyard.sikkerhed.org.946 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 2021272456, win 14600, options [mss 1460,sackOK,TS val 161605 ecr 0,nop,wscale 7], length 0 21:15:53.738519 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.946: Flags [R.], seq 0, ack 2021272457, win 0, length 0 21:16:03.806216 IP malbec.vineyard.sikkerhed.org.902 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 3889059201, win 14600, options [mss 1460,sackOK,TS val 164122 ecr 0,nop,wscale 7], length 0 21:16:03.806546 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.902: Flags [R.], seq 0, ack 3889059202, win 0, length 0 21:16:08.821900 ARP, Request who-has corvina.vineyard.sikkerhed.org tell malbec.vineyard.sikkerhed.org, length 28 21:16:08.822172 ARP, Reply corvina.vineyard.sikkerhed.org is-at 00:9c:02:ab:db:54 (oui Unknown), length 46 21:16:13.874209 IP malbec.vineyard.sikkerhed.org.712 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1480927452, win 14600, options [mss 1460,sackOK,TS val 166639 ecr 0,nop,wscale 7], length 0 21:16:13.874553 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.712: Flags [R.], seq 0, ack 1961062188, win 0, length 0 21:16:18.880588 ARP, Request who-has malbec.vineyard.sikkerhed.org tell corvina.vineyard.sikkerhed.org, length 46 21:16:18.880605 ARP, Reply malbec.vineyard.sikkerhed.org is-at cc:52:af:46:af:23 (oui Unknown), length 28 21:16:23.910209 IP malbec.vineyard.sikkerhed.org.758 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1375860626, win 14600, options [mss 1460,sackOK,TS val 169148 ecr 0,nop,wscale 7], length 0 21:16:23.910532 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.758: Flags [R.], seq 0, ack 1375860627, win 0, length 0 21:16:33.982258 IP malbec.vineyard.sikkerhed.org.694 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 1769203987, win 14600, options [mss 1460,sackOK,TS val 171666 ecr 0,nop,wscale 7], length 0 21:16:33.982579 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.694: Flags [R.], seq 0, ack 1769203988, win 0, length 0 21:16:44.026241 IP malbec.vineyard.sikkerhed.org.841 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 530553783, win 14600, options [mss 1460,sackOK,TS val 174177 ecr 0,nop,wscale 7], length 0 21:16:44.026505 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.841: Flags [R.], seq 0, ack 530553784, win 0, length 0 21:16:46.213388 IP malbec.vineyard.sikkerhed.org.43460 > corvina.vineyard.sikkerhed.org.ssh: Flags [P.], seq 64:128, ack 33, win 325, options [nop,nop,TS val 174723 ecr 397437], length 64 21:16:46.213859 IP corvina.vineyard.sikkerhed.org.ssh > malbec.vineyard.sikkerhed.org.43460: Flags [P.], seq 33:65, ack 128, win 199, options [nop,nop,TS val 427466 ecr 174723], length 32 21:16:46.213883 IP malbec.vineyard.sikkerhed.org.43460 > corvina.vineyard.sikkerhed.org.ssh: Flags [.], ack 65, win 325, options [nop,nop,TS val 174723 ecr 427466], length 0 21:16:54.094242 IP malbec.vineyard.sikkerhed.org.kerberos-master > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 2673083337, win 14600, options [mss 1460,sackOK,TS val 176694 ecr 0,nop,wscale 7], length 0 21:16:54.094568 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.kerberos-master: Flags [R.], seq 0, ack 2673083338, win 0, length 0 21:17:04.134227 IP malbec.vineyard.sikkerhed.org.1019 > corvina.vineyard.sikkerhed.org.nfs: Flags [S], seq 2176607713, win 14600, options [mss 1460,sackOK,TS val 179204 ecr 0,nop,wscale 7], length 0 21:17:04.134566 IP corvina.vineyard.sikkerhed.org.nfs > malbec.vineyard.sikkerhed.org.1019: Flags [R.], seq 0, ack 2176607714, win 0, length 0 21:18:46.314021 IP malbec.vineyard.sikkerhed.org.43460 > corvina.vineyard.sikkerhed.org.ssh: Flags [P.], seq 128:192, ack 65, win 325, options [nop,nop,TS val 204749 ecr 427466], length 64 21:18:46.314462 IP corvina.vineyard.sikkerhed.org.ssh > malbec.vineyard.sikkerhed.org.43460: Flags [P.], seq 65:97, ack 192, win 199, options [nop,nop,TS val 457494 ecr 204749], length 32 21:18:46.314482 IP malbec.vineyard.sikkerhed.org.43460 > corvina.vineyard.sikkerhed.org.ssh: Flags [.], ack 97, win 325, options [nop,nop,TS val 204749 ecr 457494], length 0 21:18:51.317908 ARP, Request who-has corvina.vineyard.sikkerhed.org tell malbec.vineyard.sikkerhed.org, length 28 21:18:51.318177 ARP, Reply corvina.vineyard.sikkerhed.org is-at 00:9c:02:ab:db:54 (oui Unknown), length 46 mount command outputs mount.nfs4: Connection timed out mount.nfs4 10.0.0.51:/ /mnt -o soft,intr,timeo=10 0,00s user 0,00s system 0% cpu 2:05,80 total Returncode is 32 Server configuration I have enabled idmapd by adding NEED_IDMAPD=yes in /etc/default/nfs-common. Bind mounts in /etc/fstab: # nfs-audio /data/audio /exports/audio none bind 0 0 # nfs-clear /data/clear /exports/clear none bind 0 0 # nfs-video /data/video /exports/video none bind 0 0 /etc/exports: /exports 10.0.0.0/255.255.255.0(rw,no_root_squash,no_subtree_check,fsid=0,crossmnt) /exports/video 10.0.0.0/255.255.255.0(rw,no_root_squash,no_subtree_check,crossmnt) Output from # ls -al /exports total 20 drwxr-xr-x 5 root root 4096 Jul 2 14:14 ./ drwxr-xr-x 28 root root 4096 Jul 2 13:46 ../ drwxr-xr-x 7 tdn audio 4096 Jun 7 11:30 audio/ drwxr-xr-x 11 root root 4096 Jun 29 12:07 clear/ drwxrwx--- 12 tdn video 4096 Jun 7 09:46 video/

  Read the article

• postfix sasl "cannot connect to saslauthd server: No such file or directory"

  - by innotune

  I try to setup postfix with smtp authentication. I want to use /etc/shadow as my realm Unfortunately I get a "generic error" when i try to authenticate # nc localhost 25 220 mail.foo ESMTP Postfix AUTH PLAIN _base_64_encoded_user_name_and_password_ 535 5.7.8 Error: authentication failed: generic failure In the mail.warn logfile i get the following entry Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: SASL authentication failure: cannot connect to saslauthd server: No such file or directory Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: SASL authentication failure: Password verification failed Oct 8 10:43:40 mail postfix/smtpd[1060]: warning: _ip_: SASL PLAIN authentication failed: generic failure However the sasl setup seems to be fine $ testsaslauthd -u _user_ -p _pass_ 0: OK "Success." i added smtpd_sasl_auth_enable = yes to the main.cf This is my smtpd.conf $ cat /etc/postfix/sasl/smtpd.conf pwcheck_method: saslauthd mech_list: PLAIN LOGIN saslauthd_path: /var/run/saslauthd/mux autotransition:true I tried this conf with the last two commands and without. I'm running debian stable. How can postfix find and connect to the saslauthd server? Edit: I'm not sure whether postfix runs in a chroot The master.cf looks like this: http://pastebin.com/Fz38TcUP saslauth is located in the sbin $ which saslauthd /usr/sbin/saslauthd The EHLO has this response EHLO _server_name_ 250-_server_name_ 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN

  Read the article

• Dovecot install: what does this error mean?

  - by jamie

  I have postfix and dovecot installed on CentOS 6 (linode) along with MySQL. The table and user is already set up, postfix installed fine, but dovecot gives me this error in the mail log: Warning: Killed with signal 15 (by pid=9415 uid=0 code=kill) The next few lines say this: Apr 7 16:13:35 dovecot: master: Dovecot v2.0.9 starting up (core dumps disabled) Apr 7 16:13:35 dovecot: config: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:1: protocols=pop3s is no longer supported. to disable non-ssl pop3, use service pop3-login { inet_listener pop3 { p$ Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:5: ssl_cert_file has been replaced by ssl_cert = <file Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:6: ssl_key_file has been replaced by ssl_key = <file Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:8: namespace private {} has been replaced by namespace { type=private } Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:24: add auth_ prefix to all settings inside auth {} and remove the auth {} section completely Apr 7 16:13:35 dovecot: config: Warning: Obsolete setting in /etc/dovecot/dovecot.conf:25: auth_user has been replaced by service auth { user } I am following directions for the install on CentOS 5 with changes in the dovecot.conf file from different sources specific to CentOS 6. So the dovecot.conf file might not be correct, but there is no good source I have found yet for making dovecot install correctly. Can anyone tell me what the error above means? The terminal does not give any message as to start OK or FAIL. When I issue the service dovecot start command, it says: Starting Dovecot Imap: and nothing more.

  Read the article

• Troubles installing/starting Redis via Resque

  - by Craig Flannagan

  Trying to complete instructions for Resque/Redis installation here: https://github.com/defunkt/resque/blob/master/README.markdown Am stuck at where I'm trying to start up Redis via Resque at the following command: Craig:/usr/local/src/resque$ rake redis:start (in /usr/local/src/resque) Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] (See full trace by running task with --trace) Rerunning with --trace (showing only part of trace): Craig:/usr/local/src/resque$ rake redis:start --trace (in /usr/local/src/resque) ** Invoke redis:start (first_time) ** Execute redis:start Detach with Ctrl+\ Re-attach with rake redis:attach ../../bin/dtach -A /tmp/redis.dtach ../../bin/redis-server ../../../etc/redis.conf rake aborted! Command failed with status (127): [../../bin/dtach -A /tmp/redis.dtach ../../...] /Users/craigflannagan/.rvm/gems/ruby-1.9.2-head@foo/gems/rake-0.8.7/lib/rake.rb:995:in `block in sh' Not sure what is wrong here - by the way, when I did those instructions $ git clone git://github.com/defunkt/resque.git $ cd resque $ PREFIX=<your_prefix> rake redis:install dtach:install $ rake redis:start I wasn't sure whether or not I was supposed to be doing #1 from within the Rails project, or if I was supposed to have the git clone create a new folder outside the Rails project (in this case, I chose to have folder created outside the project).

  Read the article

• Problems during an update of cPanel / WHM

  - by haron

  I ordered a Master WHM account with the couple CentOS / cPanel. whm-cpanel.eu.pn The installation is a fresh update of the basic services was necessary (had: WHM 11.15.0 cPanel 11.17.0 WHM X v3.1.0, Apache 1.3.37, PHP 4.4.7, MySQL 4.1.22). 1 / I started to update cPanel / WHM via the command: / scripts / upcp. Everything went well until the middle of installing the server stopped responding (or ping, or ssh). The installation appears to have continued alone to the end and after some time everything is back to normal (I do not know if there was a reboot) and my interface was updated (cPanel 11.24.4-R36167 - WHM 11.24.2 - X 3.9). 2 / Then I updated via the MySQL interface tweak this in WHM then the command: / scripts / mysqlup. Here everything went fine, no problem. 3 / Finally, I wanted to upgrade Apache 2.2 / PHP 5 and I used this command: / scripts / easyapache. After selecting all the packages and modules installation is started but the same as for point 1: the server did not answer more and this time the installation did not go through. Apache 2.2 is well spent (after the second try) but PHP has remained at 4. I tried several times the same operation without success. I do not think this is a memory problem, a free-m shortly before losing communications gave nothing alarming. By cons CPU time seemed to rise up. I reinstalled the machine again the trick, same problem! Whether via the WHM interface or by Shell, the installation stops short, for 15 minutes the machine is not responding and then everything returns to normal, but no update is done in PHP. Is there a known bug in this version of cPanel / WHM? Someone he met the same problem? If I compile Apache / PHP manually, without using the script easyapache is what I might encounter problems with cPanel later? Thank you!

  Read the article

• centos postfix send email problem

  - by Catalin

  I have a big problem with postfix. I can receive mail in webmin and outlook but I can't send (only on local I can - user to user). Dovecot is working just fine. Sendmail is disable. Please help me. postfix -n postfix: invalid option -- n postfix: fatal: usage: postfix [-c config_dir] [-Dv] command [root@xprivatecams usr]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all mail_owner = postfix mailbox_command = mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man milter_default_action = acceptsmtpd_tls_auth_only = no milter_protocol = 2 mydestination = $myhostname, localhost.$mydomain, localhost myhostname = xprivatecams.com mynetworks = 94.177.41.0/24, 127.0.0.0/8 newaliases_path = /usr/bin/newaliases.postfix non_smtpd_milters = inet:localhost:20207 queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_milters = inet:localhost:20207 smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 Jan 18 00:46:17 xprivatecams postfix/postfix-script: starting the Postfix mail system Jan 18 00:46:17 xprivatecams postfix/master[15545]: daemon started -- version 2.3.3, configuration /etc/postfix Jan 18 00:48:00 xprivatecams postfix/pickup[15546]: EDE7EA8001B: uid=0 from=<[email protected]> Jan 18 00:48:00 xprivatecams postfix/cleanup[15817]: EDE7EA8001B: message-id=<[email protected]> Jan 18 00:48:00 xprivatecams opendkim[2776]: EDE7EA8001B: DKIM-Signature header added Jan 18 00:48:01 xprivatecams postfix/qmgr[15547]: EDE7EA8001B: from=<[email protected]>, size=615, nrcpt=1 (queue active) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: connect to mail.flabell.com[72.47.224.75]: Connection timed out (port 25) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: EDE7EA8001B: to=<[email protected]>, relay=none, delay=30, delays=0.08/0.03/30/0, dsn=4.4.1, status=deferred (connect to mail.flabell.com[72.47.224.75]: Connection timed out) telnet 94.177.41.70 25 Trying 94.177.41.70... Connected to xprivatecams.com (94.177.41.70). Escape character is '^]'. 220 xprivatecams.com ESMTP Postfix ehlo me 250-xprivatecams.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN

  Read the article

• Can't compile CentOS 5, Ruby 1.9.2 and OpenSSL 1.0.0c

  - by pstinnett

  I'm trying to install Ruby 1.9.2 on CentOS 5.5. I get through most of the make process, but when it tries to compile OpenSSL I get an error. Below is the errror outputted: compiling openssl make[1]: Entering directory `/sources/ruby-1.9.2-p136/ext/openssl' gcc -I. -I../../.ext/include/x86_64-linux -I../.././include -I../.././ext/openssl -DRUBY_EXTCONF_H=\"extconf.h\" -fPIC -O3 -ggdb -Wextra -Wno-unused-parameter -Wno-parentheses -Wpointer-arith -Wwrite-strings -Wno-missing-field-initializers -Wno-long-long -o ossl_x509.o -c ossl_x509.c In file included from ossl.h:201, from ossl_x509.c:11: openssl_missing.h:71: error: conflicting types for ‘HMAC_CTX_copy’ /usr/include/openssl/hmac.h:102: error: previous declaration of ‘HMAC_CTX_copy’ was here openssl_missing.h:95: error: conflicting types for ‘EVP_CIPHER_CTX_copy’ /usr/include/openssl/evp.h:459: error: previous declaration of ‘EVP_CIPHER_CTX_copy’ was here make[1]: *** [ossl_x509.o] Error 1 make[1]: Leaving directory `/sources/ruby-1.9.2-p136/ext/openssl' make: *** [mkmain.sh] Error 1 Any help would be greatly appreciated! I'm not a master at Linux by any means, but I was able to successfully install this version of Ruby on our dev server. Our live server is running a newer version of OpenSSL which I'm assuming is why it's breaking. Just not sure what the fix is!

  Read the article

• error in php not logging or displaying

  - by Grant M

  I can not get any errors to display on screen on write to a log file. When check phpinfo() print out I have same value of master a local for display_errors On display_startup_errors On error_log /var/log/php.log error_reporting E_ALL & ~E_NOTICE log_errors On log_errors_max_len ls -l /var/log/php.log is -rw-rw-rw- 1 root root 0 Jun 21 07:47 /var/log/php.log for /var and /varlog drwxrwxrwx 23 root root 4096 Jun 2 11:13 var when there is an error in the code the page the browsers shows nothing and browser says there is no source for the page. Any suggestions of where else to look or change to errors to appear somewhere (anywhere would be good) edit: my error script is now <?php ini_set('display_errors', 1); error_reporting(E_ALL); echo "print from error.php 2 "; error //print from erroerror to cuase logging to happen. ?> this will print on display and to log Notice: Use of undefined constant error - assumed 'error' in /var/www/piku_dev2/error.php on line 7 but if I put garbage like #@$%$ on the error line I get nor error messages anywhere. Edit2: The problem turned out to in the httpd.conf file. I don't know what it was yet as it was fixed y someone else.

  Read the article

• Subversion and Quickbooks Files

  - by Jorge Fernandez

  I currently have a large problem on one of the file servers I manage for an Accounting Firm. Quickbooks has a tendency to create multiple files of the same thing over and over to prevent data loss. This is a good thing when you handle just a few files. But at an accounting firm it becomes a problem. Some of the older clients have 5-10 files in their respective folders, each with a different cut off date. Because of user error some of these file aren't labeled properly with their correct cutoff dates. This is where Subversion came to mind. Using the revision system would allow for 1 file to be master and have all of its revisions. Has anyone ever tried this with Quickbooks files? I've only used SVN with code for applications making each file size much smaller. How does SVN stand up with larger files like 10-25MB? I'm not exactly sure how SVN handles revisions - does it keep a duplicate of the files and duplicates the disk space space needed?

  Read the article

• Samba authentication problem when attempting to connect from Windows client

  - by Camsoft

  I've got a Linux server running Ubuntu and Samba. I've created two shares in Samba that point to directories that are owned by the user "cameron". When I attempt to connect to these shares on Windows 7 is connects and allows me to see the files but they are read-only. This is the desired action for guest users but not for authenticated users. My user on the Windows client is "Cameron" and has the same password as the Linux user "cameron". I don't think my Windows user has authenticated against the Linux user. I even created a users.map file to map the user cameron (linux) to Cameron (windows) but still it does not work. Here is my samba config file (UPDATED): [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . username map = /etc/samba/users.map syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 os level = 65 preferred master = Yes dns proxy = No wins support = Yes usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d valid users = cameron write list = cameron [www] path = /usr/local/apache2/htdocs write list = @www-data force group = www-data guest ok = Yes [cameron] path = /home/cameron write list = @www-data force group = www-data guest ok = Yes

  Read the article

• centos postfix send email problem

  - by Catalin

  Hello. I have a big problem with postfix. I can receive mail in webmin and outlook but I can't send (only on local I can - user to user). Dovecot is working just fine. Sendmail is disable. Please help me. postfix -n postfix: invalid option -- n postfix: fatal: usage: postfix [-c config_dir] [-Dv] command [root@xprivatecams usr]# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 home_mailbox = Maildir/ html_directory = no inet_interfaces = all mail_owner = postfix mailbox_command = mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man milter_default_action = acceptsmtpd_tls_auth_only = no milter_protocol = 2 mydestination = $myhostname, localhost.$mydomain, localhost myhostname = xprivatecams.com mynetworks = 94.177.41.0/24, 127.0.0.0/8 newaliases_path = /usr/bin/newaliases.postfix non_smtpd_milters = inet:localhost:20207 queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_tls_note_starttls_offer = yes smtp_use_tls = yes smtpd_milters = inet:localhost:20207 smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_authenticated_header = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/postfix/ssl/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/postfix/ssl/smtpd.crt smtpd_tls_key_file = /etc/postfix/ssl/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom unknown_local_recipient_reject_code = 550 Jan 18 00:46:17 xprivatecams postfix/postfix-script: starting the Postfix mail system Jan 18 00:46:17 xprivatecams postfix/master[15545]: daemon started -- version 2.3.3, configuration /etc/postfix Jan 18 00:48:00 xprivatecams postfix/pickup[15546]: EDE7EA8001B: uid=0 from=<[email protected]> Jan 18 00:48:00 xprivatecams postfix/cleanup[15817]: EDE7EA8001B: message-id=<[email protected]> Jan 18 00:48:00 xprivatecams opendkim[2776]: EDE7EA8001B: DKIM-Signature header added Jan 18 00:48:01 xprivatecams postfix/qmgr[15547]: EDE7EA8001B: from=<[email protected]>, size=615, nrcpt=1 (queue active) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: connect to mail.flabell.com[72.47.224.75]: Connection timed out (port 25) Jan 18 00:48:31 xprivatecams postfix/smtp[15820]: EDE7EA8001B: to=<[email protected]>, relay=none, delay=30, delays=0.08/0.03/30/0, dsn=4.4.1, status=deferred (connect to mail.flabell.com[72.47.224.75]: Connection timed out) telnet 94.177.41.70 25 Trying 94.177.41.70... Connected to xprivatecams.com (94.177.41.70). Escape character is '^]'. 220 xprivatecams.com ESMTP Postfix ehlo me 250-xprivatecams.com 250-PIPELINING 250-SIZE 10240000 250-VRFY 250-ETRN 250-STARTTLS 250-AUTH LOGIN PLAIN 250-AUTH=LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN

  Read the article

• Puppet Agent fails sporadically, with either timeout or "Could not find class" error

  - by smokris

  I have puppet master running on a Xen dom0, and 3 domUs syncing to it via an hourly crontab puppet agent --test. About 80% of the time, the puppet agent --test completes successfully: info: Retrieving plugin info: Caching catalog for test3 info: Applying configuration version '1333319732' notice: Finished catalog run in 5.08 seconds The other 20% of the time, it fails midway, with errors such as the following: err: Could not retrieve catalog from remote server: Error 400 on SERVER: Could not find class iptables for test1 at /etc/puppet/manifests/site.pp:1 on node test1 warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run or info: Retrieving plugin info: Caching catalog for test2 info: Applying configuration version '1333319732' notice: Finished catalog run in 24.73 seconds err: Could not send report: Error 500 on SERVER: Internal Server Error private method `gsub' called for WEBrick::HTTPStatus::RequestTimeout:Class WEBrick/1.3.1 (Ruby/1.8.5/2006-08-25) OpenSSL/0.9.8e-rhel5 at puppet:8140 or info: Retrieving plugin err: Could not retrieve catalog from remote server: execution expired warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run or info: Retrieving plugin info: Caching catalog for test3 info: Applying configuration version '1333319732' notice: Finished catalog run in 9.47 seconds err: Could not send report: Error 408 on SERVER: Request Timeout During this time, I've not made any changes to the Puppet configuration — it just sporadically fails. I'm running puppet-2.7.12 on CentOS, and followed the setup instructions described on http://docs.puppetlabs.com/learning/agent_master_basic.html. Any ideas about how I can troubleshoot this?

  Read the article

• Help building maya render node spec

  - by Ak

  Hi there, I'm looking to build 4x Maya render slaves/nodes for a friend of mine when his project gets green lit. The project involves MentalRay and lots of glass. I'm unsure if the new i7's 9xx or 8xx with hyper threading will do any better than a core 2 quad of the same (or close enough) speed. Does hyper threading make a difference to Maya or is it more performance per core based? I'm sure he's prefer I'd build another render node than pay for a bleeding edge CPU that only adds fractionly more GHz. -- The rest of the spec so far: 4Gb - 8Gb ram 64 bit OS: Probably Windows 7 (I know Linux is free, but want to build something my friend can support himself as easily as he supports his own workstation) 1TB HDD to hold textures, Maya files and renders which will be copied to central storage later Mobo with on-board video, gigabit NIC 500 - 650 watt PSU Desktop case something like a: Cooler Master ATCS 840 The machines will sold afterwards if necessary. -- If anyone has had experience in Maya and has done any tests with the new CPUs vs. the older ones I'd really appreciate your input.

  Read the article

• Update to Lion, Cannot boot into Bootcamp partitions, but can use in Parallels

  - by Jon Jester

  Using Snow Leopard had boot camp partitions for both XP and Windows 7. These were both accessible through Parallels 7 or through direct boot through boot camp. Each is on a separate partitioned hard drive. Upgraded to Lion, both were still accessible through Parallels, but have not been able to directly boot into either. Unfortunately is important to me to be able to boot into a least the Windows 7 partition. Have tried virtually everything I can find online. Seen similar issues, but nothing where they were usable virtually but not directly. Nothing works. reFit, correcting the master boot records in Windows with command line, have wiped the Windows 7 partition clean and reinstalled Windows 7 several times 1st using Boot Camp4 drivers then using Boot Camp3 drivers. Have tried resizing the bootcamp partitions. When booting into the Boot Camp partitions directly will go all the way to seeing the desktop before it fails, where I get a Windows error screen. I can see all the disks and their appropriate partitions both in OS X disk utility as well as the Windows installer utility.

  Read the article

• Setting up multiple servers for one domain

  - by Joseph Torraca

  So I am starting up a new website and I was wondering how to set up 5 servers to host the site. I have already purchased 5 Apple XServes, one will be used as a test server and the other 4 will be for the live site. So I have read some website on the internet and they all reference using one server and installing software onto it and have that server do the load balancing. I have also read that you could use a hardware, rack-mounted system and plug the servers into that. The load balancer would then distribute the load. So I have a few questions about each: 1) How do you set up the software version and have the other servers as "slaves" and have one "master" to direct traffic? 2) Which of the two options above are more reliable, and better suited for a startup that doesn't have many users per month, yet(hopefully)? 3) Is there a theoretical max limit of servers that can be connected to a software load balancing system? Note: Obviously this will change from software to software, but in terms of the server being able to handle it? 4) In your own opinion, what are you using for your sites? Have you had any problems setting up that system or operating it once its running? Are there any things you would stay away from if you had to start over? 5) I also purchased a Apple RAID system, so if you are familiar with it, is there any way to connect it to multiple Xserves so they all serve the same data? I'm a little confused on this, so thanks for all your help and being patient with me. Note: Take it easy on me, I am learning this as I go along, so I may have used terms incorrectly or explained things that don't really make sense. Sorry. P.S. If you need me to supply the specs on the servers to determine which system makes the most sense, I can post them for you.

  Read the article

• How do I fix issue causing "incomplete startup packet" log message trying to implement replication in Postgresql?

  - by colour me brad

  I've got two cloud servers running Ubuntu 13.04 and PostgreSQL 9.2. I've primarily used this blog post to aid me in setting things up. However, to do the initial database dump to the slave I'm using pg_start_backup/pg_stop_backup strategy used in this other blog post. I've read through the docs and postgres wikis as well. I ran into several problems I was able to solve, but I can't get past this wretched "the database is starting up" failure. I'm not sure if seeing "cp: cannot stat '/var/lib/postgresql/9.2/archive/00000001000000000000003A': No such file or directory" after "consistent recover state reached" is normal or the first sign of a problem. The searching I've done on "the database is starting up" and "incomplete startup packet" tells me that something is sending empty TCP packets to the slave. The only thing that even knows about the slave is the master, so I'm not sure why it's sending empty packets... Has anyone worked with this and have an idea what might be going wrong? The postgres log on the slave looks like so: 2013-08-26 13:01:38 CDT LOG: entering standby mode 2013-08-26 13:01:38 CDT LOG: restored log file "000000010000000000000039" from archive 2013-08-26 13:01:38 CDT LOG: incomplete startup packet 2013-08-26 13:01:39 CDT LOG: redo starts at 0/39000020 2013-08-26 13:01:39 CDT LOG: consistent recovery state reached at 0/390000E0 cp: cannot stat '/var/lib/postgresql/9.2/archive/00000001000000000000003A': No such file or directory 2013-08-26 13:01:39 CDT LOG: streaming replication successfully connected to primary 2013-08-26 13:01:39 CDT FATAL: the database system is starting up 2013-08-26 13:01:39 CDT FATAL: the database system is starting up 2013-08-26 13:01:40 CDT FATAL: the database system is starting up 2013-08-26 13:01:40 CDT FATAL: the database system is starting up 2013-08-26 13:01:41 CDT FATAL: the database system is starting up 2013-08-26 13:01:42 CDT FATAL: the database system is starting up 2013-08-26 13:01:42 CDT FATAL: the database system is starting up 2013-08-26 13:01:43 CDT FATAL: the database system is starting up 2013-08-26 13:01:43 CDT FATAL: the database system is starting up 2013-08-26 13:01:44 CDT FATAL: the database system is starting up 2013-08-26 13:01:44 CDT FATAL: the database system is starting up 2013-08-26 13:01:44 CDT LOG: incomplete startup packet 2013-08-26 13:03:27 CDT FATAL: the database system is starting up 2013-08-26 13:03:27 CDT FATAL: the database system is starting up 2013-08-26 13:03:30 CDT FATAL: the database system is starting up 2013-08-26 13:03:30 CDT FATAL: the database system is starting up thanks! brad

  Read the article

• Switch Text Paragraphs in OpenOfficeOrg Writer mailmerge

  - by Glen S. Dalton

  I am using mailmerge to write the same letter with minor differenes to many peolpe. I experienced that switching text paragraphs depending on database values was not easy for me. I ended up putting huge text paragraphs into the database becaus switching did not really work for me. Actually I dont' understand how writer does it and maybe the boolean evaluation is buggy? There is some possibility making paragraphs invisible depending on database fields, but it was frustrating. After marking a paragraph as invisible (depending on a condition) it went invisible in the main document and did not come back, I lost the content. An example in pseudocode of what I want in my mailmerge document: {if [[balance]] 10} We owe you money. Please can you send your bank details. {end if} {if [[balance]] < -10} Please transfer the remaining amount to our banc account 123... {end if} Maybe this could be done with makros? But how to combine makros with mailmerge? Can you tell me what are the pitfalls and how to master them? I once did this with ms word, it was a lot easier. The normal mailmerge (including database fields in the letters) works fine for me in OpenOffice writer.

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >