Search Results

Search found 5830 results on 234 pages for 'nuclear power plant'.

Page 144/234 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

• MacBook start up problem

  - by DA

  I have an aging, ailing MacBook. The battery died on it a few months ago, but can still use it when plugged in. I recently upgraded it to Snow Leopard. Had it unplugged for a few days. Went to boot it up today and now get this symptom: start up chime white screen with apple logo shuts off That's all it'll do. I tried unplugging and holding down the power button for 30 seconds but that didn't remedy the situation. Any theories? Finally an excuse to get the 27" iMac?

  Read the article

• Server 2008 locks me out when not using the machine for 10 minutes after installing SP2

  - by Daniel Magliola

  I have recently installed Service Pack 2 on my Windows Server 2008 machine (which I use actively for development, and i'm always logged on to). Now, after this installation, when I don't use the machine for some time (let's say, 10 minutes), it locks itself so I have to press Ctrl+Alt+Del and log back in. I have already checked the Screen Saver settings, and it's "None", as it always has been. I also looked into power settings and everything looks right (20 mins to turn off monitor, and i haven't found any settings regarding locking me in there). Do you have any idea what I can do so that it won't lock me out after not using the machine for a while? Thanks! Daniel

  Read the article

• Which software to use for RAMDISK on Windows 2008?

  - by Tony_Henrich

  I am building a server machine with lots of RAM. At least 16G. I am planning to put my frequently read and written data in RAM so I am looking for software for creating RAM disks. This is for Windows Server 2008 R2 Standard 64bit. Any recommendations? I would like one where I can flush the disk image into persistent storage upon demand. For example when Windows shuts down. (I am aware of all the consequences of data loss when power is lost)

  Read the article

• Should I use UPS with my laptop to extend the battery life?

  - by Mehper C. Palavuzlar

  I recently bought a new Vaio laptop which has a 4400 mAh battery. I will use it at home most of the time, and I have an unused uninterruptible power supply (UPS). Should I remove the battery and connect my laptop to UPS? If I do that, how much does it effect the battery's life? I know that batteries stand longer when kept in half-charged in a cool place, but their lifespan decreases in time due to age effect as well. So is it worth to keep the battery out of my laptop, use a UPS instead and mount it when necessary? or should I continue to work with battery mounted?

  Read the article

• Laptop Locking Up

  - by David

  I am having a very weird issue on a Lenovo W510 laptop. It will lock up randomly. I have had it lock up during post, during the boot-up of Linux, during login, and after the login. The following are tests that I have performed on the laptop. I ran memtest I took out the extra memory module. I swapped the HDD with another HDD that had Windows 7 on it. (It BSOD'd, and before anyone could possibly read the error line, it restarts.) I tried taking the battery out and booting with only the Power cord. The only other options I can think of the problem being are the motherboard or the PSU. If anyone has any advice, I appreciate it. If not, the HP guy will be here in a few days to fix it. I would just love to call them up and tell them that the service is no longer needed.

  Read the article

• Host hijacks USB printer from VirtualBox machine

  - by jackhab

  I have Ubuntu 9.1 running Windows XP in VirtualBox. Windows XP is a print server (there is no Linux driver for our printer). The printer is connected via USB and its USB filter is added to virtual machine settings. The problem is that every several hours Ubuntu tries to access the printer (trying to install it) and disconnects it from the virtual machine. The printer remains disconnected until I connect it again manually. I thought it is a problem with Windows power management but disabling sleep/standby in Windows didn't help. Please, advise.

  Read the article

• How to ignore an error in Powershell and let it continue?

  - by Jake

  I am trying to see if a process is running on multiple servers and then format it into a table. get-process -ComputerName server1,server2,server3 -name explorer | Select-Object processname,machinename Thats the easy part - When the process does not exist or if the server is unavailable, powershell outputs a big ugly error, messes up the the table and doesn't continue. Example Get-Process : Couldn't connect to remote machine.At line:1 char:12 + get-process <<<< -ComputerName server1,server2,server3 -name explorer | format-table processname,machinename + CategoryInfo : NotSpecified: (:) [Get-Process], InvalidOperatio nException + FullyQualifiedErrorId : System.InvalidOperationException,Microsoft.Power Shell.Commands.GetProcessCommand How do I get around this? If the I would still like to get notified if the process isn't available or Running.

  Read the article

• The Shearin Group Real Estate Brokers: Projektets blå Zone i strand byer

  - by user224103

  Jeg kan virkelig godt lide hvad de blå Zone projekt gør: det er folkesundheden initiativledes af strand byer sundhed District, at gøre livet bedre i vores lokale samfund. BlåZone anmoder lokale South Bay beboere til at tænke om genbrug, grøn-levende, ogvirkningen deres handlinger og daglige living har på miljøet og dem omkring dem. Kast begivenheder og kampagner omkring strand byer, og har haft en stor indflydelsepå Hermosa Beach i særdeleshed. For eksempel, holder de en workshop på 18 januar2014 kaldet Power of Purpose på Redondo Beach Performing Arts Center. Workshoppen vil bliver alt om hvordan formål vedrører vores personlige værdier,overbevisninger og prioriteter og køre byKathleen Terry af lederskab fra ManhattanBeach og lederskab Redondo og formand for Manhattan Beach Rotary Club.

  Read the article

• Motherboard warning lights when plugging in a display port cord to graphics card?

  - by rllr

  Earlier today, my computer spontaneously shut itself off and refused to turn back on. I tested my PSU and it's operating fine. I unplugged everything and let it sit for a while and it started to make a high pitched coil whine/hiss. When I came back an hour later and plugged in only the power cord, it turned on without any issues. After some troubleshooting, I noticed my motherboard (Intel D975XBX2) has a red CPU led and VR led that come on whenever I plug my monitor into my graphics card via display port. DVI does not cause a similar issue. I was running three monitors off the card, so I need both DVI ports and the display port working. Is it likely my graphics card needs to be replaced, or should I be looking elsewhere to resolve this issue?

  Read the article

• LVM mirroring VS RAID1

  - by syrenity

  Hi. Having learned a bit about LVM mirroring, I thought about replacing the current RAID-1 scheme I'm using to gain some flexibility. Problem is that according to what I found on the Internet, LVM is: 1) Slower then RAID-1, at least in reading (as only single volume being used for reading). 2) Non-reliable on power interrupts, and requires disk cache disabling for prevention of data loss. http://www.joshbryan.com/blog/2008/01/02/lvm2-mirrors-vs-md-raid-1/ Also it seems, at least to several setup guides I read (http://www.tcpdump.com/kb/os/linux/lvm-mirroring/intro.html), that one actually requires a 3rd disk for storing the LVM log. This makes the setup completely unusable on 2 disks installations, and lowers the amount of used mirror disks on higher amount of disks. Can anyone comment the above facts, and let me know his experience of using LVM mirroring? Thanks.

  Read the article

• IBM Server searching for secondary server

  - by user1241438

  I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary server" and hangs their for almost 10 mins. After 10 mins, it says timeout on searching chassis 2. But after this it proceed to boot the OS properly. But my frustration, i need to wait for almost 15 mins to boot everytime. How do i prevent this error message.

  Read the article

• Random shut down? Asus N53J Laptopi

  - by Mr.Y

  My Laptop is pretty new and today it random shut down on its own. I was surfing the net and the computer shut down on its own (Like losing power, without any warning). It was the 2nd time, the first time was 3 weeks ago. Btw it happens during cold days. I remember one time I was unable to turn on my laptop at all. So I'm pretty sure it's not related to heat issue... could it be the laptop is too "cold"? My room temperature is around 17=18 degree on average :P edit -I use Windows 7 Professional. -I run memtest86 once and it passed. -I run my laptop WITHOUT battery all the time.

  Read the article

• Decent 1gb switch (16-24 port) for rack...

  - by TomTom

  Hallo, for a rack containing a smaller nubmer of servers (5 at the moment, going to stay in this area), I look to replace the currently aging 100mbit switch with a 1gb switch. This is for the backend between the servers. I expect some ISCIS traffic there ,so a 10gbit option would be nice (preferably for two ports, as extension modules). I dont need management, this is a pure backend of an internal cluster. I do VLAN, but there is no sensible management the switch can do there. I wuold like: * 1he only, obviously * preferable limited moving parts. * Low price ;) * Enough power to run at least half the ports in full speed at the same time. Anyone any recommendations?

  Read the article

• Where should I plug in my monitor -- Motherboard or Graphics card?

  - by Jeremy White

  Assuming I am using the following equipment... motherboard with HDMI/DVI & no embedded graphics discrete graphics card (nVidia or ATI) on PCI-E slot Intel CPU with integrated graphics ...where should I plug my monitor into the computer? Presumably, I'll get the fastest speed on games connected directly to the graphics card. But there is also power savings when connecting to the motherboard and accessing the Intel on-board graphics. I've read that some motherboards can switch automatically between the Intel graphics and discrete graphics. Is that something that works well, and where do I connect the monitor to enable that?

  Read the article

• Local dedicated hosting space (own hardware)

  - by Scott

  Where can I find local dedicated hosting space for my own hardware? I know I can rent dedicated hosting from various companies online, but usually I think that means I'm renting their hardware too. I just need a space with a network connection and a power outlet. That's it. How much would this cost? What would I search for? Is it available easily? Or would it only be the sort of thing huge companies would do? I'm in the greater NYC area. It's for a project I'm working on, but the thing's loud and annoying. I'd be willing to pay a little to get it out of sight and out of mind. I don't even care too much about the quality of the network connection. I'd rather not rent other people's hardware cause it probably would cost a fortune to rent a machine like this (tons of ram).

  Read the article

• Computer Locks Up Completely When Resuming From Standby

  - by kcoppock

  Okay, so I'm having a strange issue lately with my desktop, and off the top of my head I'm not sure what the problem is, so I'm hoping for some ideas on how to track down the cause. First, my PC: AMD Phenom 9600 Quad-Core 2.4 GHz 4 GB DDR2 160 GB boot HDD 1 TB & 120 GB secondary HDD Nvidia GeForce 8600 GTS Windows 7 Professional 64-bit I have my power settings as follows: Turn off the display: 10 minutes Turn off hard disk: 20 minutes Sleep after: Never After a while, I'll come back to use my computer again, wiggle the mouse, and the screen comes back on like normal, but the desktop is unresponsive. I can move the cursor, but nothing responds to clicks or keyboard entry. If I click a few times with the mouse, the computer eventually locks up completely and the mouse cursor stops moving as well. After I restart, everything works just fine. Is there a log you recommend checking or really any suggestions would be welcome at this point. Thanks!

  Read the article

• connect to a headless virtualbox instance in Linux?

  - by 130490868091234

  I've started a headless virtualbox instance with this command: VBoxManage startvm "Ensembl67VirtualMachine" --type headless Waiting for VM "Ensembl67VirtualMachine" to power on... VM "Ensembl67VirtualMachine" has been successfully started. It is set up with Remote Desktop Server Port:5555 with Authentication Method: Null and Extended Features: Allow Multiple Connections and it's now running, but I don't know how to connect to it from the same laptop where it's running. I would like to be able to have it running on a terminal. I tried this but nothing happens: rdesktop localhost:5555 ERROR: localhost: unable to connect rdesktop 192.168.1.1:5555 Any ideas?

  Read the article

• Free alternatives to vSphere for ESXi (if one exists)

  - by Tim

  Dear All, Am feeling a touch confused and overwhemled. From what I gather even though ESXi is free I will only be able to manage my VMs (create or power on etc) for 60 days unless I buy a licence for vSphere. This is somewhat frustrating. As I am looking for a home lab to practice for various certs I was hoping to also practice using vmware stuff to do so. Have I got the wrong end of the stick? Is there a free built in web interface like there was with VMServer or is the only option vSphere (which is massively out of my price range)? Looking forward to your responses and hoping that I have just missed something obvious! Regards Tim

  Read the article

• Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

  - by Carl

  I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

  Read the article

• How to charge an iPhone on a Windows PC without Installaing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Run command before and after printing with CUPS?

  - by leto

  Hello, this is a home setup. A central printer server (Linux) manages the queue, a HP 2430DTN is attached to it via 100Mbit/sec Ethernet. The printer is hooked up to a managable power source. A shell script watches the queue on the server (lpstat -o) and turn on the printer when there is a job. If the queue is empty for 10 minutes it turns the printer off. Now this setup messes up, stops the printer etc. after a couple of weeks and is in general "not so reliable". I now know how to change the stop-printer thing, but: Is there a way to run my turn printer on script and turn printer off script directly from cups without watching the queue? That would be so cool!

  Read the article

• Connect through SSH and type in password automatically, without using a public key

  - by binary255

  A server allows SSH connections, but not using public key authentication. It's not within my power to change this at the moment (due to technical difficulties, not organizational) but I will get on it as soon as possible! What I need now is to execute commands on the server using plain old account+password authentication from a script. That is, I need to do it in a non-interactive way. Is it possible? And how do I do it? The client which will be executing the script runs Ubuntu Server 8.04. The server runs Cygwin and OpenSSH.

  Read the article

• What is the method to reset the Planar 1910m monitor?

  - by Richard J Foster

  My monitor (a Planar, apparently model number PL1910M) is not working. (It is flashing a green / orange sequence which I believe to be an error code. The sequence, in case it helps consists of orange and green three times quickly followed by a longer orange, then another green followed by a long period where both colors appear to be present). I vaguely recall a co-worker suffering from a similar problem, and our IT department "resetting" the monitor by holding down a certain set of keys as they apply power. Unfortunately, I do not remember what that key sequence was, our IT department is not responding, and the Planar web site is blocked by the content filtering firewall we have in place! What is the sequence to perform the reset? (For bonus geek-credit, what does the code mean... as if it indicates a blown component clearly a reset will not help me. ;-))

  Read the article

• Multiple Graphics cards - Non Multi-Display Setup

  - by Alan Thomas

  Is it possible for me to utilize the processing capabilities of multiple graphics cards, even if I'm only using one monitor? I recently bought a new AMD graphics card, fairly top of the line. I also have a two year old, decent nVidia card. They're obviously very different cards. I don't really mind for gaming because my current card can handle most games fine by itself. I'm concerned about video editing programs such as Adobe Premiere and After Effects. Would the system be able to utilize the power of both cards to, say, render a video? I have both drivers still installed on my machine. And because there is only one monitor connected to my current graphics card (AMD) the nVidia would be connected to no display. So I am wondering whether it would or could be utilized in some way to help in processing video. Thanks!

  Read the article

• How to get external 2.5 inch HD enclosure get recognised

  - by fireBand

  I am completely out of ideas. I have 2.5inch HDD from my old laptop, I have tried with 2 different HDD enclosures but my desktop does not recognize it. Not even showing in the disk management or BIOS. The HDD works fine if I use in a 3.5 inch enclosure with external power. I have tried 3 different Y USB cables. I have also got a 7 port self powered 2A USB hub. I have updated my chipset drivers as well. The problem is with my desktop , the enclosures work fine with my new laptop. Anything else that I should try? Thanks in advance.

  Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >