Search Results

Search found 49218 results on 1969 pages for '10 2 0 5 aix grid control'.

Page 145/1969 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

  • windows 8.1 upgrade fails with error code 0xc1900101-0x20017

    - by cmorse
    I just tried to install windows 8.1 on my laptop, but it fails to install with the message: Sorry we couldn't complete the update to Windows 8.1. We restored your previous version of Windows to this PC 0xC1900101 - 0x20017 It looks like on the first boot that the laptop is going to the PC restore screen (it asks what kind of keyboard I have, and then what repair optins I would like to take). Thus far I have just been selecting "Continue to windows 8." I'm running a Lenovo x220i tablet. I've got 43GB of free disk space. It installed just fine on my desktop. The primary difference between the two machines is that the desktop has media center install, and isn't using TrueCrypt. Full WindowsUpdate.log http://pastebin.com/hGmAW4Q1 Most important portion of WindowsUpdate.log: 2013-10-17 10:41:06:671 964 694 Agent ************* 2013-10-17 10:41:06:671 964 694 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates] 2013-10-17 10:41:06:671 964 694 Agent ********* 2013-10-17 10:41:06:671 964 694 Agent * Online = No; Ignore download priority = No 2013-10-17 10:41:06:671 964 694 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1" 2013-10-17 10:41:06:671 964 694 Agent * ServiceID = {7971F918-A847-4430-9279-4A52D1EFE18D} Third party service 2013-10-17 10:41:06:671 964 694 Agent * Search Scope = {Machine & All Users} 2013-10-17 10:41:06:671 964 694 Agent * Caller SID for Applicability: S-1-5-18 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {AD47FBDC-F7F9-4E7F-BAF4-DBA3784C7101} 2013-10-17 10:41:06:436-0600 1 202 [AU_REBOOT_COMPLETED] 102 {00000000-0000-0000-0000-000000000000} 0 0 AutomaticUpdates Success Content Install Reboot completed. 2013-10-17 10:41:07:233 964 870 Report REPORT EVENT: {8D4E7A67-9526-4702-A897-5BE5F97497AF} 2013-10-17 10:41:06:639-0600 1 204 [AGENT_INSTALLING_FAILED_POST_REBOOT] 101 {8951E70D-4332-4F7C-B92D-D9362E384959} 1 c1900101 WSAcquisition Failure Content Install Installation Failure Post Reboot. 2013-10-17 10:41:07:249 964 870 Report CWERReporter::HandleEvents - WER report upload completed with status 0x8 2013-10-17 10:41:07:249 964 870 Report WER Report sent: 7.8.9200.16715 0xc1900101(0x20017) 8951E70D-4332-4F7C-B92D-D9362E384959 Install 101 Unmanaged 2013-10-17 10:41:07:249 964 870 Report CWERReporter finishing event handling. (00000000)

    Read the article

  • Linux, some packets are not being NAT

    - by user70932
    Hi, I'm trying to NAT HTTP traffic, I'm new to this and facing some issues. What i'm trying to do is NAT client HTTP requests to a webserver. CLIENT - NAT BOX - WEBSERVER When the client open the IP of the NAT BOX, the request should be pass to the web server. But I'm getting "HTTP request sent, awaiting response..." and then wait serveral minutes before the request is done. Looking at the tcpdump output, it looks like the first Syn packet on (10:48:54) is being NAT but not the second, third, fourth... ACK or PSH packets, and wait until (10:52:04) it starts NAT again on the ACK packet. The iptables command I'm using is: iptables -t nat -A PREROUTING -p tcp -i eth0 --dport 80 \ -j DNAT --to-destination WEBSERVER I'm wondering what could have caused this behavior? Thanks alot. 10:48:54.907861 IP (tos 0x0, ttl 49, id 16395, offset 0, flags [DF], proto: TCP (6), length: 48) CLIENT.61736 > NATBOX.http: S, cksum 0x6019 (correct), 1589600740:1589600740(0) win 5840 <mss 1460,nop,wscale 8> 10:48:54.907874 IP (tos 0x0, ttl 48, id 16395, offset 0, flags [DF], proto: TCP (6), length: 48) CLIENT.61736 > WEBSERVER.http: S, cksum 0xb5d7 (correct), 1589600740:1589600740(0) win 5840 <mss 1460,nop,wscale 8> 10:48:55.102696 IP (tos 0x0, ttl 49, id 16397, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x2727 (correct), ack 2950613896 win 23 10:48:55.102963 IP (tos 0x0, ttl 49, id 16399, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:48:58.103078 IP (tos 0x0, ttl 49, id 16401, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:48:58.366344 IP (tos 0x0, ttl 49, id 16403, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:04.103204 IP (tos 0x0, ttl 49, id 16405, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:04.363943 IP (tos 0x0, ttl 49, id 16407, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:16.101583 IP (tos 0x0, ttl 49, id 16409, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:16.363475 IP (tos 0x0, ttl 49, id 16411, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:49:40.100796 IP (tos 0x0, ttl 49, id 16413, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:49:40.563898 IP (tos 0x0, ttl 49, id 16415, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:50:28.099396 IP (tos 0x0, ttl 49, id 16417, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:50:28.761678 IP (tos 0x0, ttl 49, id 16419, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x26af (correct), ack 1 win 23 10:52:04.093668 IP (tos 0x0, ttl 49, id 16421, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > NATBOX.http: P 0:120(120) ack 1 win 23 10:52:04.093678 IP (tos 0x0, ttl 48, id 16421, offset 0, flags [DF], proto: TCP (6), length: 160) CLIENT.61736 > WEBSERVER.http: P 1589600741:1589600861(120) ack 2950613896 win 23 10:52:04.291021 IP (tos 0x0, ttl 49, id 16423, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x25d3 (correct), ack 217 win 27 10:52:04.291028 IP (tos 0x0, ttl 48, id 16423, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7b91 (correct), ack 217 win 27 10:52:04.300708 IP (tos 0x0, ttl 49, id 16425, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x253c (correct), ack 368 win 27 10:52:04.300714 IP (tos 0x0, ttl 48, id 16425, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7afa (correct), ack 368 win 27 10:52:04.301417 IP (tos 0x0, ttl 49, id 16427, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: F, cksum 0x253b (correct), 120:120(0) ack 368 win 27 10:52:04.301438 IP (tos 0x0, ttl 48, id 16427, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: F, cksum 0x7af9 (correct), 120:120(0) ack 368 win 27 10:52:04.498875 IP (tos 0x0, ttl 49, id 16429, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > NATBOX.http: ., cksum 0x253a (correct), ack 369 win 27 10:52:04.498881 IP (tos 0x0, ttl 48, id 16429, offset 0, flags [DF], proto: TCP (6), length: 40) CLIENT.61736 > WEBSERVER.http: ., cksum 0x7af8 (correct), ack 369 win 27

    Read the article

  • Riak "error":"insufficient_vnodes_available"

    - by Wolfiem
    We have 4 nodes Riak installation. They are running on Ubuntu 12.04 LTS Precise installed servers. We have installed 1.1.4 at August 1st 2012 and upgraded 1.2.0 when its available. Server names are: f1 - 10.10.0.12 - This is the first installed server. We have joined other ones to this server. This also serves Riak control. s2 - 10.10.0.22 - s3 - 10.10.0.23 - s4 - 10.10.0.24 - This server also serves Riak control. This morning we've seen "insufficient nodes available" error at our applications log and restarted all nodes. 3 of them became available except "f1" UPDATE : while I prepare this message live 3 nodes became unavailable and need restart Riak. wolfiem@f01:~$ sudo /etc/init.d/riak start Riak failed to start within 15 seconds, see the output of 'riak console' for more information. If you want to wait longer, set the environment variable WAIT_FOR_ERLANG to the number of seconds to wait. I've tried to set WAIT_FOR_ERLANG value to 60 seconds but I can't. adding this line in vm.args didn't work: -env WAIT_FOR_ERLANG 60 I also tried to set this from terminal but it didn't work either. wolfiem@f01:~$ export WAIT_FOR_ERLANG=60 It still says "Riak failed to start within 15 seconds" This is the console.log output: 2012-09-11 10:58:02.532 [info] <0.7.0> Application lager started on node 'riak@10.10.0.12' 2012-09-11 10:58:02.560 [warning] <0.148.0>@riak_core_ring_manager:reload_ring:231 No ring file available. 2012-09-11 10:58:02.585 [error] <0.164.0> CRASH REPORT Process <0.164.0> with 0 neighbours exited with reason: eaddrnotavail in gen_server:init_it/6 line 320 This is the error.log output 2012-09-11 10:58:02.585 [error] <0.164.0> CRASH REPORT Process <0.164.0> with 0 neighbours exited with reason: eaddrnotavail in gen_server:init_it/6 line 320 This is the crash.log output: 2012-09-11 10:58:02 =CRASH REPORT==== crasher: initial call: mochiweb_socket_server:init/1 pid: <0.164.0> registered_name: [] exception exit: {eaddrnotavail,[{gen_server,init_it,6,[{file,"gen_server.erl"},{line,320}]},{proc_lib,init_p_do_apply,3,[{file,"proc_lib.erl"},{line,227}]}]} ancestors: [riak_core_sup,<0.135.0>] messages: [] links: [<0.136.0>] dictionary: [] trap_exit: true status: running heap_size: 377 stack_size: 24 reductions: 403 neighbours: You can find the riak console output below: wolfiem@f01:~$ riak console Attempting to restart script through sudo -H -u riak Exec: /usr/lib/riak/erts-5.9.1/bin/erlexec -boot /usr/lib/riak/releases/1.2.0/riak -embedded -config /etc/riak/app.config -pa /usr/lib/riak/basho-patches -args_file /etc/riak/vm.args -- console Root: /usr/lib/riak Erlang R15B01 (erts-5.9.1) [source] [64-bit] [smp:8:8] [async-threads:64] [kernel-poll:true] =INFO REPORT==== 11-Sep-2012::10:44:18 === alarm_handler: {set,{system_memory_high_watermark,[]}} ** /usr/lib/riak/lib/observer-1.1/ebin/etop_txt.beam hides /usr/lib/riak/lib/basho-patches/etop_txt.beam ** Found 1 name clashes in code paths 10:44:19.099 [info] Application lager started on node 'riak@10.10.0.12' 10:44:19.130 [warning] No ring file available. 10:44:19.158 [error] CRASH REPORT Process <0.164.0> with 0 neighbours exited with reason: eaddrnotavail in gen_server:init_it/6 line 320 /usr/lib/riak/lib/os_mon-2.2.9/priv/bin/memsup: Erlang has closed. =INFO REPORT==== 11-Sep-2012::10:44:19 === alarm_handler: {clear,system_memory_high_watermark} Erlang has closed {"Kernel pid terminated",application_controller,"{application_start_failure,riak_core,{shutdown,{riak_core_app,start,[normal,[]]}}}"} Crash dump was written to: /var/log/riak/erl_crash.dump Kernel pid terminated (application_controller) ({application_start_failure,riak_core,{shutdown,{riak_core_app,start,[normal,[]]}}})

    Read the article

  • Bash: Read lines in a file scenario with sed or awk

    - by user105566
    I have this scenarios: File Content: 10.1.1.1 10.1.1.2 10.1.1.3 10.1.1.4 I want sed or awk so that when i cat the file every time new line is returned. like First iteration: cat ip | some magic 10.1.1.1 Second iteration returns 10.1.1.2 Third iteration returns 10.1.1.3 Fourth iteration returns 10.1.1.4 and after n number of iterations, it returns to line 1 Fifth iteration returns: 10.1.1.1 Can we do it using sed or awk.

    Read the article

  • Upgrading memory on an IBM Power 710 Express (8231-E2B)

    - by cairnz
    We have a Power 710 Express server that was loaded with 4x4 GB memory on a single riser card. I have replaced the 4 chips with 4x8GB and put in another riser card and loaded it with 4x8GB more for a total of 64GB memory. The firmware is AL730_078. When i power it on, the service processor boots up and i can access the ASMi. From here I can look at "Memory Serial Presence Data" and see that the system in some way detects 8x8 GB. However when i look at Hardware Deconfiguration and specifically Memory Deconfiguration, it is still listed with old values, 16384MB, and claims there are 4x4 chips in the C17 riser. How do i proceed to make the server recognize properly the amount of memory installed? I get a FSPSP04 and B181B50F progress code on booting because (i think) it hasn't been told the memory has changed. It then does not proceed to booting the operating system (VIOS) when turned on. Are there any steps I have overlooked here? Can I do some commands, either on the service processor, or otherwise, to tell the system to configure with the proper amount of memory? PS: This is a stand alone server, not configured with HMC or SDMC.

    Read the article

  • HP Procurve 2610 intervlan routing

    - by user19039
    Can anyone tell me why inter vlan routing is working for all vlans except my newly created vlan 4/ I have an hp procurve 2610. Any help would be appreciated. I have basically this 1 switch with all unmanaged switches attached to the core. We have a second 2610 on port 28 Running configuration: ; J9085A Configuration Editor; Created on release #R.11.25 hostname "Core_HP" interface 22 speed-duplex 100-full exit ip routing snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 1-12,17-22,26-27 ip address 192.168.4.6 255.255.255.0 tagged 25 no untagged 13-16,23-24,28 exit vlan 2 name "WAN" untagged 28 ip address 10.254.254.3 255.255.255.0 exit vlan 3 name "Wireless" untagged 13-16,24 ip address 192.168.7.6 255.255.255.0 ip helper-address 192.168.4.2 tagged 27 exit vlan 35 name "guest" untagged 23 tagged 24 exit vlan 4 name "esxi" untagged 25 ip address 10.10.1.1 255.255.248.0 exit ip route 192.168.5.0 255.255.255.0 10.254.254.1 ip route 192.168.6.0 255.255.255.0 10.254.254.1 ip route 0.0.0.0 0.0.0.0 192.168.4.10 show ip route IP Route Entries Destination Gateway VLAN Type Sub-Type M etric Dist. ------------------ --------------- ---- --------- ---------- - --------- ----- 0.0.0.0/0 192.168.4.10 1 static 1 1 10.10.0.0/21 esxi 4 connected 0 0 10.254.254.0/24 WAN 2 connected 0 0 127.0.0.0/8 reject static 0 250 127.0.0.1/32 lo0 connected 0 0 192.168.4.0/24 DEFAULT_VLAN 1 connected 0 0 192.168.5.0/24 10.254.254.1 2 static 1 1 192.168.6.0/24 10.254.254.1 2 static 1 1 192.168.7.0/24 Wireless 3 connected 0 0 show ip Internet (IP) Service IP Routing : Enabled Default TTL : 64 Arp Age : 20 VLAN | IP Config IP Address Subnet Mask Prox y ARP ------------ + ---------- --------------- --------------- ---- ----- DEFAULT_VLAN | Manual 192.168.4.6 255.255.255.0 No WAN | Manual 10.254.254.3 255.255.255.0 No Wireless | Manual 192.168.7.6 255.255.255.0 No esxi | Manual 10.10.1.1 255.255.248.0 No guest | Disabled

    Read the article

  • Load balancing with rsync

    - by David
    i have 2 server with public ip: SERVER A - 10.10.10.11 SERVER B - 10.10.10.12 both of them are centos 6 in OS, installed nginx with php-fpm, 2 exact same website stored at: /var/www/html. Domain with: myxdomain.com and dns hosted with cloudflare ( since cloudflare do support round robin ) to point the domain to A record of 10.10.10.11 and 10.10.10.12. I know that round robin dns does not cover the failover or fallover, but it does not matter, what i need is: How do i sync the both content of /var/www/html server A and server B to be exactly same? Lets say: 1) user uploaded their file to server A, the file content will be sync to server B as well. 2) user uploaded their file to server B, the file content will be sync to server A as well. rsync will be good choice here? Any example of command line and cronjob time that suitable? thanks

    Read the article

  • nginx + varnish + apache differente IPs in VirtualHost Apache

    - by zeusgod
    Hi, My idea is put NGINX as proxy to redirect to Varnish (cache static content) and then proxy to apache with a lot of VirtualHost in different IPs. My problems is that I would know how can configure Varnish to send access to correct IP, I am going explain: NGINX: Listen in: 10.10.10.10, 20.20.20.20 and 30.30.30.30 on ports: 80 and 443 Proxy redirect to Varnish 10.10.10.10:8080, 20.20.20.20:8080 and 30.30.30.30:8080 Varnish: Port: 8080 - THIS IS THE PROBLEM Proxy content not static to Apache on port 8000 - THIS IS THE OTHER PROBLEM Apache2: Listen in: 10.10.10.10:8000, 20.20.20.20:8000 and 30.30.30.30:8000 Response correct VirtualHost This is the idea. When I try with one IP only, all work correctly, because Varnish is only listen in one IP and port and send to backend in one IP and port too. Could you help me to configure Varnish or there is a best way to configure similar scenario please?

    Read the article

  • SSH login to Cisco switch using Rancid times out

    - by Lars
    I have a 3560 switch that I have configured to accept SSH logins, and this works fine. However I cannot get Rancid to complete the login process to any of my switches using SSH. I get a timeout error after a minute or so. Telnet logins work fine with the same username and password. Here is my rancid setup in .cloginrc: add user * {myuser} add password * {strongAccessPassword} {strongEnablePassword} add method * ssh telnet Then, when I run bin/clogin 10.10.1.10 I get: # bin/clogin 10.10.1.10 10.10.1.10 spawn ssh -c 3des -x -l myuser 10.10.1.10 ############################################### Please authenticate. ############################################### Password: Error: TIMEOUT reached Again, when I do this using telnet as my preferred mothod in .cloginrc, it works without issue.

    Read the article

  • Public-to-Public IPSec tunnel: NAT confusion

    - by WuckaChucka
    I know this is possible -- and apparently fairly common with larger companies that don't/can't route private addresses for overlap reasons -- but I can't wrap my head around how to get this to work. I'm playing around with pfSense, Vyatta and a Cisco 5505 right now, hardware-wise. So here's my setup: WEST: Vyatta outside: 10.0.0.254/24 inside: 172.16.0.1/24 machine a: 172.16.0.200/24 EAST: Cisco 5505 outside: 10.0.0.210/24 inside: 192.168.10.1 machine b (webserver): 192.168.10.2 So what we're trying to do is this: route traffic across the tunnel from machine A to machine B without using private addresses. i.e. 172.16.0.200 makes a TCP request to 10.0.0.210:80, and as far as EAST is concerned, it sees a src IP of 10.0.0.254. On WEST, I have your typical many-to-one Source NAT to translate 172.16.0.0/24 to 10.0.0.254 and that's confirmed to be working. Also on WEST, I have the following IPSec config: Local IP: 10.0.0.254 Peer IP: 10.0.0.210 local subnet: 10.0.0.254/32 remote subnet: 10.0.0.210/32 I have the reversed configuration on EAST. What happens when I make a request from machine A to 10.0.0.210:80 is that the SNAT translates the private address of machine A to 10.0.0.254 and it's routed out (and discarded at the other end) without establishing the tunnel. What I'm assuming is happening is that the inside interface on WEST receives a packet from 172.16.0.200 and since this doesn't match the local subnet defined in the tunnel configuration, it's not processed by the IPSec engine and the tunnel is not established. How do you make this work? Seems like a chicken and egg thing with the NAT and IPSec and I just can't wrap my head around how this can be done: can I say, "if a packet is received on the inside interface with a destination of 10.0.0.210, translate it to 10.0.0.254 before the IPSec engine inspects it"?

    Read the article

  • get ubuntu terminal to send an escape sequence (control+shift+up)

    - by user62046
    This problem starts when I use emacs ( with -nw option). Let me first explain it. I tried to define hotkey (for emacs) as following (global-set-key [(control shift up)] 'other-window) but it doesn't work (no error, just doesn't work), neither does (global-set-key [(control shift down)] 'other-window) But (global-set-key [(control shift right)] 'other-window) and (global-set-key [(control shift left)] 'other-window) work! But because the last two key combinations are used by emacs (as default), I don't wanna change them for other functions. So how could I make control-shift-up and control-shift-down work? I have googled "(control shift up)", it seems that control-shift-up is used by other people, (but not very few results). In the Stack Overflow forum, Gille answered me as following: Ctrl+Shift+Up does send a signal to your computer, but your terminal emulator is apparently not transmitting any escape sequence for it. So your problem is in two parts. First you must get your terminal emulator to send an escape sequence, which depends on your terminal emulator, and is Super User material, or Unix.SE if you're using a unix system. Then you need to declare the escape sequence in Emacs, and my answer explains that part So I come here for this question: How do I get my terminal (I use ubuntu 10.04, and the built-in terminal) to send an escape sequence for Control+Shift+Up Control+Shift+down

    Read the article

  • What kind of server do I need to handle 10 million requests and mySQL queries a day?

    - by Calvin
    I'm a new bie of server administration and I'm looking for a powerful hosting service to host my new website. This website is basically a back-end of an mobile online game, and it will: handle up to 10 million of HTTPS request and mySQL queries a day store up to 2000 GB file on the hard disk transfer probably 5000 GB data in and out per month it runs on PHP and mySQL have 10 million records in mySQL database, for each record there are 5-10 fields, around 100 bytes each I really don't know what kind of a server I need to handle these requirements, my question is: what cpu/ram do I need for a dedicated server or vps? what hosting companies are able to offer this kind of dedicated server or VPS? what about cloud computing? I've researched Amazon EC2 but it seems complicated to me. And I've contacted Rackspace but strangely they said Cloudsites is not suitable for my requirements. I wonder if there is other cloud hosting company. any other alternative method? thanks very much!

    Read the article

  • What the heck is a OPTIONS method in a IIS 7.5 web Log?

    - by Knox
    I know what a GET and a POST are, but it's almost impossible to Google for the word OPTIONS. Here's what I see (i deleted all the stuff at the end) of each: 11/23/11 0:02:13 10.100.0.14 GET /CUpdate2.cshtml _=1322006533495 11/23/11 0:02:13 10.200.0.10 OPTIONS /AssignmentCount _=1322006576798 11/23/11 0:02:13 10.200.0.10 GET /media/faxSound.wav - 11/23/11 0:02:13 10.200.0.10 GET /Star/StarUpdates _=1322006578729 11/23/11 0:02:13 10.100.0.10 GET /CUpdate2.cshtml _=1322006533268

    Read the article

  • telnet to 3389 connects, RDP remote desktop app bails ?

    - by scott_lotus
    I can TELENT 192.168.10.10 3389 and get a connection. But RDP client to 192.168.10.10 immedietly bails (i.e less then 1 sec) "connect" button greys briefly, RDP app remains on screen. Have tried these from many nodes on the subnet to 192.168.10.10 with same result. On 192.168.10.10 Allow Remote Desktop is enabled. On 192.168.10.10 windows firemall is off. Im connecting from the same subnet i.e no firewall hardware / routers in the way. AV software is installed but other nodes on same subnet allow RDP connection using exact same AV settings (network group profile) Checked 192.168.10.10 for any additonal AV software or local firewall products. Im sure non exist. Checked regedit to ensure 3389 was the port set for listening. Seems to be an XP problem (sp3) ( 2 nodes on the my LAN have this issue) and many work fine. Thanks for any help Scott

    Read the article

  • Cannot set target directory when extracting an archive using tar

    - by palto
    I'm trying to extract a tar archive to a specific directory. I've tried using -C flag but it doesn't work as expected. Here is the commandline I'm using tar xvf myarchive.tar -C mydirectory/ This gives me a following error: tar: file -C: not present in archive tar: file mydirectory/: not present in archive I've also tried setting the -C flag before the archive file but it just says this: tar xvf -C mydirectory/ myarchive.tar tar: -C: No such file or directory What am I doing wrong? EDIT: tar -tf shows that the tar archive does not have full path names: tar -tf myarchive.tar herareport/ herareport/bin/ ...

    Read the article

  • Issues with DHCP over multiple subnets

    - by Dan Monego
    I have a cisco router configured to handle multiple subnets (10.1.10.n, 10.2.10.n, etc), and an ubuntu system serving DHCP to the computers served by the router. After a restart of the DHCP, the systems on the 10.1 subnet are fine, but neither the server or the computers configured on the other subnets can see the router at 10.2.10.1 (or 10.3.10.1, or 10.4.10.1). The router can see itself at 10.2.10.1, however. The change that caused this was restarting the server, so I'm approaching it assuming the configuration error is on that end. Is that the likely issue or is there a different problem that would prevent the machines on the 10.2.10 subnet from resolving DHCP?

    Read the article

  • Why my Ldirectord check multiple times on read server every interval?

    - by garconcn
    I have a Ldirectord server and two real servers. My ldirectord used to check the request page on real server once in every interval, but now I found that it check four times. I have monitored the log on both real servers, they have the same problem. Here is my ldirectord configuration: checktimeout=10 checkinterval=5 autoreload=yes logfile="/var/log/ldirectord.log" quiescent=no virtual=192.168.1.100:80 fallback=127.0.0.1:80 real=192.168.1.10:80 gate real=192.168.1.20:80 gate service=http request="lb.html" receive="still alive" scheduler=sh persistent=60 protocol=tcp checktype=negotiate Ldirectord will connect to each real server once every 5 seconds (checkinterval) and request 192.168.0.10:80/test.html (real/request). The access log in real server: 192.168.1.100 - - [13/Jun/2012:10:36:44 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:44 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:44 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:44 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:49 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:49 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:49 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:49 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:54 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:54 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:54 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805" 192.168.1.100 - - [13/Jun/2012:10:36:54 -0700] "GET /lb.html HTTP/1.1" 200 12 "-" "libwww-perl/5.805"

    Read the article

  • Can someone explain the physical architecture of RAID 10 in complete layman's terms?

    - by Hank
    I am a newbie in the world of storage and I am having a hard time digesting the physical architecture of some of the RAID levels. I am particularly interested in RAID 10, and 50. I asked the question specifically about RAID 10, because I feel if I understand that, I'll understand the other. So, I get the definition of RAID 10 - "minimum 4 disks, a striped array whose segments are mirrored". If I've got 4 disks and Disks 1 and 2 are a mirrored pair, and Disks 3 and 4 are a mirrored pair - where does the data get striped? Thanks.

    Read the article

  • 12-24 rack, 10-32 server thumbscrew. How to mount?

    - by JJ.
    We have just purchased a APC rack (model AR204A) with 12-24 threaded holes. We couldn't get a "square hole" model in time for our setup deadline. Unfortunately our rack servers (Lenovo RD240) appear to have 10-32 thumbscrews for securing the server to the rack. We've successfully mounted the server rails to the rack using 12-24 screws however the 10-32 thumbscrews in the server front won't "grab" the 12-24 holes in the rack, thus there is nothing to stop the server from sliding right off the rack if pushed from the back. The thumb screws on the server don't seem to be removable, so we can't simply use 12-24 screws instead. Any suggestions on how to work around this problem? Is there any way to "convert" a 12-24 hole to a 10-32 thread (or similar approach)? Thanks in advance.

    Read the article

  • RTNETLINK answers: File exists... maybe because assigned a new mac adress

    - by steven
    I got a "RTNETLINK answers: File exists Failed to bring up eth0:1" on "ifup eth0:1". I suspect it happens because i assigned a new mac adress in my VM's network adapter. Can you tell me how to fix the issue? My configuration looks like this: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.80 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 192.168.1.1 # Alias being connected to 192.168.10.x Network auto eth0:1 allow-hotplug eth0:1 iface eth0:1 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 Why do I get "RTNETLINK answer: File exists.." suddenly? I worked with this configuration before without problems. All i did in the past is to renew the adapters mac adress. At the moment I am connected to the 192.168.10.x Network and if I do /etc/init.d/networking stop /etc/init.d/networking start then i got "RTNETLINK [...] falied to bring up eth0:1" but the strage thing is that i am able to connect to 192.168.10.83 via ssh from my host machine. But I cannot reach the internet from the debian client. I hope it is clear what my problem is, now. update if i change my /etc/network/interfaces like this then "ifup eth0" fails, too with the same error! # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.10.83 netmask 255.255.255.0 gateway 192.168.10.10 dns-nameservers 192.168.10.1 with verbose option enabled i got: Configuring interfache eth0=eth0 (inet) run-parts --verbose /etc/network/if-pre-up.d ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0 RTNETLINK answers: File exists Failed to bring up eth0. same if i type this manually: ip addr add 192.168.10.83/255.255.255.0 broadcast 192.168.10.255 dev eth0 label eth0

    Read the article

  • Server 2008 Active directory file sharing Restriction

    - by Usman
    My network scenario is: Two location connected each other through Wireless towers. 1st network ip address are 10.10.10.1 to 10.10.10.150 2nd network ip address are 10.10.10.200 to 10.10.10.254 Both location using their own ACTIVE DIRECTORY (MS SERVER 2008) and share their data with each other network through file sharing. My Problem is that every single client can explore the whole network. by simply typing \computername. i want to implement some restriction on network regarding file sharing. i want to restrict 1st Network Clients to open 2nd network Computer or server. Is there have any Group Policy or Folder permission scenario that i implement on my both network..

    Read the article

  • OpenVPN - client-to-client traffic working in one direction but not the other

    - by Pawz
    I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

    Read the article

  • solaris + why cant ping to default getway

    - by yael
    I have Solaris machine with IP 10.10.10.100 and default getway 10.10.10.1 and subnet 255.255.255.0 remark - solaris machine connected to cisco switch via cross cable and from switch to my laptop I configure my laptop to connect to my Solaris machine so my laptop IP is 10.10.10.1 and subnet 255.255.255.0 but something not clearly I have ssh connection from my laptop to my Solaris machine ( I mean I in my solaris machine ) but from Solaris machine I can do ping to 10.10.10.1 ? ( how it can be ??? ) please advice why?

    Read the article

  • How to configure OpenVPN server to use custom default gateway?

    - by Arenim
    I have a vpn server at address 10.1.0.2 and the server have another ip in it's network -- 10.0.0.2 in his subnet (it's a tun2socks router). But default server's gateway is NOT 10.0.0.2 (and it's ok) but another external IP. I want all the client's traffic to be forwarded through this ip address -- 10.0.0.2. Here is part of my server's config: dev tap0 server-bridge 10.1.0.1 255.255.255.0 10.1.0.50 10.1.0.100 push "route 10.0.0.0 255.255.255.0" ; now client can ping 10.0.0.2 push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 10.1.0.1" push "dhcp-option WINS 10.1.0.1" in fact i want some like push "redirect-gateway 10.0.0.2" How can I achieve this?

    Read the article

  • What "Drained" mean in this llstatus result?

    - by xslittlegrass
    I'm trying to run jobs on the cluster of our university, and I come across this result when I trying to see the status of the cluster: llstatus Name Schedd InQ Act Startd Run LdAvg Idle Arch OpSys pandora001 Down 0 0 Run 29 41.04 9999 POWER7 AIX61 pandora002 Down 0 0 Busy 32 32.06 9999 POWER7 AIX61 pandora003 Down 0 0 Drned 0 0.03 9999 POWER7 AIX61 pandora004 Down 0 0 Busy 32 32.07 9999 POWER7 AIX61 pandora005 Down 0 0 Busy 32 32.02 9999 POWER7 AIX61 pandora006 Down 0 0 Busy 32 34.01 9999 POWER7 AIX61 pandora007 Down 0 0 Busy 32 32.02 9999 POWER7 AIX61 pandora008 Down 0 0 Drned 0 0.00 9999 POWER7 AIX61 pandora1 Avail 15 5 Idle 0 0.00 86 POWER7 AIX61 llstatus -R Machine Consumable Resource(Available, Total) ------------------------------ ------------------------------------------------- pandora001 ConsumableCpus< 28-31 >< 0-31 > ConsumableMemory(28.297 gb,124.000 gb)+ pandora002 ConsumableCpus< >< 0-31 > ConsumableMemory(14.625 gb,124.000 gb)+ pandora003 ConsumableCpus< 0-31 >< 0-31 > ConsumableMemory(124.000 gb,124.000 gb)+ pandora004 ConsumableCpus< >< 0-31 > ConsumableMemory(28.000 gb,124.000 gb)+ pandora005 ConsumableCpus< >< 0-31 > ConsumableMemory(28.000 gb,124.000 gb)+ pandora006 ConsumableCpus< >< 0-31 > ConsumableMemory(14.625 gb,124.000 gb)+ pandora007 ConsumableCpus< >< 0-31 > ConsumableMemory(5.250 gb,124.000 gb)+ pandora008 ConsumableCpus< 0-31 >< 0-31 > ConsumableMemory(124.000 gb,124.000 gb)+ pandora1 ConsumableCpus< 0-7 >< 0-7 > ConsumableMemory(32.000 gb,32.000 gb) It seems that the pandora003 and pandora008 are in the status of "Drned". What does that mean? Why I can't use the resources of at thoes nodes? Thanks.

    Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >