Search Results

Search found 18781 results on 752 pages for 'ip port'.

Page 145/752 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

• Static IP on Wifi at work and dynamic at home?

  - by Jason Shultz

  I need the laptops at my office to have a static IP for security purposes and identification. However, some employees take their laptops home in the evening. If I have the wifi config set to use a static IP, how can they have a dynamic IP at home? the laptops are using Windows Vista and Windows 7.

  Read the article

• Static IP on Wi-Fi at work and dynamic at home?

  - by Jason Shultz

  I need the laptops at my office to have a static IP for security purposes and identification. However, some employees take their laptops home in the evening. If I have the Wi-Fi configuration set to use a static IP, how can they have a dynamic IP at home? The laptops are using Windows Vista and Windows 7.

  Read the article

• Static IP address on Wi-Fi at work and dynamic at home?

  - by Jason Shultz

  I need the laptops at my office to have a static IP address for security purposes and identification. However, some employees take their laptops home in the evening. If I have the Wi-Fi configuration set to use a static IP address, how can they have a dynamic IP address at home? The laptops are using Windows Vista and Windows 7.

  Read the article

• Intermittent 403 errors when using allow to limit access to url with both explicit IP and SetEnvIf

  - by rbieber

  We are running Apache 2.2.22 on a Solaris 10 environment. We have a specific URL that we want to limit access to by IP. We recently implemented a CDN and now have the added complexity that the IP's that a request are shown to be coming from are actually the CDN servers and not the ultimate end user. In the case that we need to back the CDN out, we want to handle the case where either the CDN is forwarding the request, or the ultimate client is sending the request directly. The CDN sends the end user IP address in an HTTP header (for this scenario that header is called "User-IP"). Here is the configuration that we have put in place: SetEnvIf User-IP (\d+\.\d+\.\d+\.\d+) REAL_USER_IP=$1 SetEnvIf REAL_USER_IP "(10\.1\.2\.3|192\.168\..+)" access_allowed=1 <Location /uri/> Order deny,allow Allow from 10.1.2.3 192.168. allow from env=access_allowed Deny from all </Location> This seems to work fine for a time, however at some point the web server starts serving 403 errors to the end user - so for some reason it is restricting access. The odd thing is that a bounce of the web server seems to resolve the issue, but only for a time - then the behavior comes back. It might be worthwhile to note as well that this URL is delegated to a JBoss server via mod_jk. The denial of access is, however; confirmed to be at the Apache layer and the issue only seems to happen after the server has been running for some time.

  Read the article

• Trace IP Adress in Wordpress

  - by Ajith

  I need to trace the ipadress (where my website access)for optional loading of my theme.Explanation: I want to add a share link to twitter and facebok in my application.i think in some countries like china;twitter blocked.Thats why i need to check from where my site is accessing.otherwise which affecting my site's performance.How can we solve this problem in PHP.If anybody have experience please help me..

  Read the article

• How can I block access to public server IP for OpenSSH in Debian?

  - by VanDerSpar

  I got a Debian server with a public and a private IP in a DMZ. I need to be able to connect to it through SSH on our private side, and then block all access to the public address. Both /etc/hosts.deny and sshd_config seems to only let one block incoming IP addresses. What I really want is to disable SSH connections for the public IP. I've been trying iptables, but I haven't had luck with that neither. Any help is appreciated.

  Read the article

• How do I start nginx on port 80 at OS X login?

  - by Bryson

  I installed Nginx using homebrew and after completing the installation the following message was displayed: In the interest of allowing you to run `nginx` without `sudo`, the default port is set to localhost:8080. If you want to host pages on your local machine to the public, you should change that to localhost:80, and run `sudo nginx`. You'll need to turn off any other web servers running port 80, of course. You can start nginx automatically on login running as your user with: mkdir -p ~/Library/LaunchAgents cp #{prefix}/org.nginx.nginx.plist ~/Library/LaunchAgents/ launchctl load -w ~/Library/LaunchAgents/org.nginx.nginx.plist Though note that if running as your user, the launch agent will fail if you try to use a port below 1024 (such as http's default of 80.) But I want Nginx, on port 80, running at login and I don't want to have to open terminal and type in sudo nginx to do it. I want it to load from a plist file like Redis and PostgreSQL do. I moved the plist to /Library/LaunchAgents/ from the user folder equivalent and changed its ownership, also tried setting the user directive in the nginx.conf file and still the same error message in Console.app: nginx: [emerg] bind() to 0.0.0.0:80 failed (13: Permission denied) (along with another message telling me that since nginx was being run without super-user privileges, the user directive was being ignored)

  Read the article

• How do I set up a virtual network interface with its own IP address?

  - by Stefano Palazzo

  I vaguely remember that it's possible to set up virtual network interfaces with their own IP addresses, using only one physical network connection. I can find a few guides on the internet that recommend setting these up in /etc/network/interfaces, but Ubuntu doesn't use this file. Therefore my question: What's the correct way of setting these up in recent versions of Ubuntu? As this is a laptop, and I need it to connect to all kinds of different networks, I want to keep the network manager and all its configuration. To be more clear: at the end of this, I want to have a new network interface (e.g. "eth42") with its own IP address, but using whatever is connected in network manager to send the actual packets. In NM, it should appear as if I just had a second ethernet adapter installed in my system.

  Read the article

• Will Parallel-port dongle work on USB-to-Parallel Adapter?

  - by Gary M. Mugford

  We have a niche program running on a Win2K laptop that uses a security dongle connected to a parallel port for authentication. The laptop is getting creaky and I spent a frustrating night last night shopping various websites for a new laptop that had a parallel port. Seems I'm about three years late [G]. The question I have, is, if I buy a new(ish) laptop and use a USB-to-Parallel Port adapter, will the security dongle work? I know I'm not being specific about the app, but it's one most people wouldn't have heard of anyways. I've been guessing the answer to my question is no, since the app won't know to send a request out to the non-existent port. But, if the process actually is that the dongle sends a message INTO the computer every now and then, then it might work. And, I'm not sure whether the dongle is only needed at program startup time or randomly. The dongle is a 'permanent' addition to the old laptop. This is all about the money. We can have a newly-updated version of the program (which won't add any features we need) for the princely sum of $2700. Or we can spend $500 on a refurbed laptop still running WinXP, add a 30 buck adapter and keep the same solid, stolid performance we've come to appreciate. But it all comes down to the dongle behaviour. Oh, and a dock won't work. The whole laptop issue is about moving about the various nooks and crannies of the building with laptop in hand. Thanks for any suggestions/guidance. GM

  Read the article

• Squid: caching *.swf with variables

  - by stfn

  I'd recently upgraded my Ubuntu 11.10 x64 server to 12.04. In this process Squid was updated from 2.7 to 3.1. Squid 3.1 has many different options witch broke my setup. So I completely removed squid 2.7 and 3.1 and started from scratch. Everything is now working as before except for 1 thing: caching of .swf files with ?/variables. Squid 3 sees a ? as dynamic content and does not cache it. For example, Squid 2.7 was caching the .swf file at http://ninjakiwi.com/Games/Tower-Defense/Play/Bloons-Tower-Defense-5.html and 3.1 is not. <object id="mov" name="movn" classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="800" height="620"> <param name="movie" value="http://www.ninjakiwifiles.com/Games/gameswfs/btd5.swf?v=160512-2"> <param name="allowscriptaccess" value="always"> <param name="bgcolor" value="#000000"> <param name="flashvars" value="file=http://www.ninjakiwifiles.com/Games/gameswfs/btd5-dat.swf?v=280512"> <p>Get Flash play Ninja Kiwi games.</p> </object> It is because of the "?v=160512-2" and "?v=280512" part. This line should be responsible for that: refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 But disabling it still doesn't cache the .swf files. How do I configure Squid 3.1 to cache those files? My current config is: acl manager proto cache_object acl localhost src 127.0.0.1/32 ::1 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT acl localnet src 192.168.2.0-192.168.2.255 acl localnet src 192.168.3.0-192.168.3.255 http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access allow localnet http_access deny all http_port 3128 cache_dir ufs /var/spool/squid 10240 16 256 maximum_object_size 100 MB coredump_dir /var/spool/squid3 refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i \.(gif|png|jpg|jpeg|ico)$ 10080 90% 43200 override-expire ignore-no-cache ignore-no-store ignore-private refresh_pattern -i \.(iso|avi|wav|mp3|mp4|mpeg|swf|flv|x-flv)$ 43200 90% 432000 override-expire ignore-no-cache ignore-no-store ignore-private refresh_pattern -i \.(deb|rpm|exe|zip|tar|tgz|ram|rar|bin|ppt|doc|tiff)$ 10080 90% 43200 override-expire ignore-no-cache ignore-no-store ignore-private refresh_pattern -i \.index.(html|htm)$ 0 40% 10080 refresh_pattern -i \.(html|htm|css|js)$ 1440 40% 40320 refresh_pattern Packages\.bz2$ 0 20% 4320 refresh-ims refresh_pattern Sources\.bz2$ 0 20% 4320 refresh-ims refresh_pattern Release\.gpg$ 0 20% 4320 refresh-ims refresh_pattern Release$ 0 20% 4320 refresh-ims refresh_pattern . 0 40% 40320 cache_effective_user proxy cache_effective_group proxy

  Read the article

• Bridging 10GbE with 12.04 - bridging works but the bridging computer has no internet access

  - by Donal

  I have been trying to get 12.04 bridging working with two 10GbE cards. I have 2 10GbE cards in a linux box being used only for this bridge, 1 with 2 10GbaseT ports and another with a single CX4 port. I have 2 client computers connected with 10GbaseT cards and the CX4 card connects to a procurve switch. I can get the bridging happening mostly the way that I want, The clients receive dhcp information from the dhcp server (not the bridging machine) and can connect to and properly see the rest of the network. Speeds are ok, not amazing but working on that is another matter. My problem is that the bridging machine has no internet access ... meaning I can't update anything or apt-get anything It can ping all other machines on the local network. I've tried the helpful hints from: https://help.ubuntu.com/community/NetworkConnectionBridge "Enabling Internet Use on the Bridging Computer" and get the following RTNETLINK answers: File exists but dhclient br0 does nothing for me :( I think if it is anything it a multiple route problem as both br0 and eth4 have ipaddresses ... even though I have only set it up so that br0 has one ... Bridge setup details: /etc/network/interface auto br0 iface br0 inet static address 192.168.0.246 netmask 255.255.255.0 gateway 192.168.0.1 broadcast 192.168.0.255 dns-nameservers 192.168.0.1 dns-search example.com dns-domain example.com #(eth2 & eth3 are the 10GbaseT) #(eth4 is the CX4 connection) pre-up ip link set eth2 down pre-up ip link set eth3 down pre-up ip link set eth4 down pre-up brctl addbr br0 pre-up brctl addif br0 eth4 eth3 eth2 pre-up ip addr flush dev eth3 pre-up ip addr flush dev eth2 pre-up ip addr flush dev eth4 post-down ip link set eth4 down post-down ip link set eth2 down post-down ip link set eth3 down post-down ip link set br0 down post-down brctl delif br0 eth2 eth3 eth4 post-down brctl delbr br0 ifconfig -a br0 Link encap:Ethernet HWaddr 00:15:17:22:20:34 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::215:17ff:fe22:2034/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4957 errors:0 dropped:0 overruns:0 frame:0 TX packets:1077 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:596320 (596.3 KB) TX bytes:139952 (139.9 KB) eth4 Link encap:Ethernet HWaddr 00:60:dd:47:7c:05 inet addr:192.168.0.57 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::260:ddff:fe47:7c05/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:9000 Metric:1 RX packets:15391 errors:0 dropped:51 overruns:0 frame:0 TX packets:1207 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916769 (5.9 MB) TX bytes:154312 (154.3 KB) Interrupt:70 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth4 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 192.168.0.0 0.0.0.0 255.255.255.0 U 1 0 0 eth4

  Read the article

• Is multiple domain names and links from same IP causing poor search engine rankings?

  - by John

  I have an ecommerce website which is not doing so well in Google. I am trying to improve this of course, and am looking at some possibilities for why it isn't doing well. The website has four domain names, all of which have been indexed by Google. A few months ago I applied 301 redirects to any requests for two of the domain names so now it is down to two domain names (one is a .net, the other is a .com.au, the others were .net.au and .com). I prefer to use my main domain name (the .com.au), but one of the names has been around for a long time and has more inbound links. According to a PageRank tool, both are PR2. It is a Classic ASP site and up until recently had a lot of querystring parameters. In the last week or so I added URL rewriting so there is now no parameters for most pages. I don't do 301 redirects from the old URLs but instead I add the META canonical tag indicating the preferred new URL. At the same time I redesigned the site and improved title tags, META descriptions, and H tags but it hasn't been long enough yet for Google to index many of these yet. I also looked at what pages Google has indexed and strangely it has some strange pages in the index, there are a lot of pages which are actual keyword searches (more a bunch of random letters than an actual word). What I mean is that it is as if they had typed in something to search for in my search box - there are no links to pages like this and the only way of getting this is to type something in to the search box). So I added a META robots tag with noindex,nofollow anytime that I render pages like this. Years ago I set up a fake price comparison site which lists all my products and links back to my site. It has a different keyword rich domain name but is on the same server and same IP address. It's a completely different layout but does have the same product categories and product descriptions (although I have stripped formatting out of them so they are not identical except in text). I also have a few blog sites which again are on the same server/IP and all have advertising for the website. My questions are: What should I do with the multiple domains, just use one, or continue with two or more? Should I add 301 redirects, not just the META canonical tag? Any idea about Google indexing my search results page, and did I do the right thing with the META robots tag? Is the fake price comparison site likely to be causing problems? Are all the links to the site from other domain names but the same IP address likely to be causing problems? Thanks for any help. Sorry for so many questions in one.

  Read the article

• Google se lance encore un peu plus dans la voix sur IP et la vidéo-conférence, au moment où Skype so

  Mise à jour du 19/05/10 Google se lance dans la voix sur IP et la vidéo-conférence Au moment où Skype sort la nouvelle version de son application Les deux faits ne sont pas liés, mais ils montrent que la voix sur Internet (VoIP) au sens large est un secteur en plein devenir. Après Gizmo5 (lire ci-avant), Google vient en effet de lancer une Offre Publique d'Achat (OPA) sur une société norvégienne spécialisée dans la « transmission du son et de la vidéo en temps réel » sur Internet. La définition d'une technologie qui fait furieusement penser à Skype. La direction de Global IP Solutions a d'ores et déjà annoncé qu'...

  Read the article

• What causes a switch port to receive data not destined for it?

  - by user1693454

  We are having an intermittent fault which is effecting one of our control systems on one of our HP Procurve switches. For some reason, this PLC (10mbit port - 192.168.6.56) which is attached directly to the HP Switch intermittantly start's receiving data which is not destined for it. The data is being sent from a Thecus NAS with latest firmware (192.168.6.218) to a physical IBM Server running Win2003R2 and SAP (192.168.6.225). The problem does not just send to this server, it has been to other physical servers in the past too, but always from the Thecus NAS. I am using a monitor port to wireshark what is going in/out of the PLC - normally there would be about 1mb in/out per 2 or 3 minutes - only a server asking the state of the coils. When the problem occurs, there is a flood of data being put onto the PLC line - in this captured instance, about 67mb in less than a minute. Due to this, there is no way that the PLC can be queried as the port is effectively DOSed, in turn killing part of our factory. I know that having Production on the same vlan as IT is not a good idea - I agree, however it cannot be changed at the moment (will have to wait 3 months), as well as the problem has only started happening in the last 3 months. Here is a screen cap of one of the packets being sent from the Thecus NAS which was captured from the PLC port on the HP Switch: And there are over 700 of these in this one 1024kb file. If anyone has any idea on what could be going on, some help would be greatly appreciated. If you need to know anything more, let me know! Cheers!

  Read the article

• Why would i need extra IP adresses from my web host?

  - by user4524

  I am moving to a new and cheaper host. My old one raised the prices suddenly by a factor 10. Now what I did not like about the old one, was that each time I set up a new website, I had to set up a new account, with the result that I have to pay for a lot of webspace and a lot of bandwith i don't use. Now I am moving over to a new host, who cheaply offers virtual servers. Now I am a n00b when it comes to server tech. I have two questions about this: 1. Could I install all my webistes on this virtual server, provided it is big enough? 2. They offer the possibility of getting more than one IP address, but it costs more. What would be the advantage of this? Would I be able to suffice with one IP address?

  Read the article

• La CNIL autorise les premiers ayants droits à collecter des adresses IP, la machine Hadopi se met en

  Mise à jour du 14.06.2010 par Katleen La CNIL autorise les premiers ayants droits à collecter des adresses IP, la machine Hadopi se met en marche Quelques semaines après la mise en place de l'équipe chargée de la mettre en oeuvre, la loi Hadopi semble prête à décoller. La CNIL (Commission nationale informatique et libertés) viendrait en effet d'autoriser les premiers ayants droits à collecter de manière automatisée les adresses IP d'utilisateurs soupçonnés de téléchargement illégal. Ceci leur permettra de ficher les contrevenants présumés pour ensuite en avertir Hadopi. Concrètement, c'est la société Trident Media Guard qui sera seule habilitée à collecter ces adresses pour le...

  Read the article

• Cisco ASA not forwarding traffic from one interface to another

  - by Antoine Benkemoun

  Hello ServerFault, I am needing help in the configuration process of my Cisco ASA 5510. I have set up 4 Cisco ASA interconnected together via a big LAN. Each Cisco ASA has 3 or 4 LANs attached to them. The IP routing part is taken care of by OSPF. My problem is on another level. A computer connected to one of the LANs attached to an ASA has no problem communicating with the outside world. The outside world being anything "after" the ASA. My problem is that I am completely unable to have them communicate with another LAN connected to the same ASA. To rephrase this, I am unable to send traffic from one interface of a given ASA to another interface of the same ASA. My configuration is the following : ! hostname Fuji ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 10.0.0.2 255.255.255.0 no shutdown ! interface Ethernet0/1 speed 100 duplex full nameif cs4 no shutdown security-level 100 ip address 10.1.4.1 255.255.255.0 ! interface Ethernet0/2 speed 100 duplex full no shutdown ! interface Ethernet0/2.15 vlan 15 nameif cs5 security-level 100 ip address 10.1.5.1 255.255.255.0 ! interface Ethernet0/2.16 vlan 16 nameif cs6 security-level 100 ip address 10.1.6.1 255.255.255.0 ! interface Management0/0 speed 100 duplex full nameif management security-level 100 ip address 10.6.0.252 255.255.255.0 ! access-list nat_cs4 extended permit ip 10.1.4.0 255.255.255.0 any access-list acl_cs4 extended permit ip 10.1.4.0 255.255.255.0 any access-list nat_cs5 extended permit ip 10.1.5.0 255.255.255.0 any access-list acl_cs5 extended permit ip 10.1.5.0 255.255.255.0 any access-list nat_cs6 extended permit ip 10.1.6.0 255.255.255.0 any access-list acl_cs6 extended permit ip 10.1.6.0 255.255.255.0 any ! access-list nat_outside extended permit ip any any access-list acl_outside extended permit ip any 10.1.4.0 255.255.255.0 access-list acl_outside extended permit ip any 10.1.5.0 255.255.255.0 access-list acl_outside extended permit ip any 10.1.6.0 255.255.255.0 ! nat (outside) 0 access-list nat_outside nat (cs4) 0 access-list nat_cs4 nat (cs5) 0 access-list nat_cs5 nat (cs6) 0 access-list nat_cs6 ! static (outside,cs4) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 static (outside,cs5) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 static (outside,cs6) 0.0.0.0 0.0.0.0 netmask 0.0.0.0 ! static (cs4,outside) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 static (cs4,cs5) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 static (cs4,cs6) 10.1.4.0 10.1.4.0 netmask 255.255.255.0 ! static (cs5,outside) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 static (cs5,cs4) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 static (cs5,cs6) 10.1.5.0 10.1.5.0 netmask 255.255.255.0 ! static (cs6,outside) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 static (cs6,cs4) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 static (cs6,cs5) 10.1.6.0 10.1.6.0 netmask 255.255.255.0 ! access-group acl_outside in interface outside access-group acl_cs4 in interface cs4 access-group acl_cs5 in interface cs5 access-group acl_cs6 in interface cs6 ! router ospf 1 network 10.0.0.0 255.255.255.0 area 1 network 10.1.4.0 255.255.255.0 area 1 network 10.1.5.0 255.255.255.0 area 1 network 10.1.6.0 255.255.255.0 area 1 log-adj-changes ! There is nothing really complicated in this configuration. It just NATs from one interface to another and that's it. I have tried enabling same-security-traffic permit inter-interface but that doesn't help. I therefore must be missing something a little bit more complicated. Does anyone know why I cannot foward traffic from one interface to another ? Thank you in advance for your help, Antoine

  Read the article

• How to validate selects / inserts are hitting the right server with MySQL Master/Slave

  - by bwizzy

  I've got a rails app using the master_slave_adapter plugin (http://github.com/mauricio/master_slave_adapter/tree/master) to send all selects to a slave, and all other statements to the master. Replication is setup using Mysql master / slave. I'm trying to validate that all the SQL statements are indeed going to the right place. Selects to the slave (db2), inserts to the master (db1) but I'm not sure how to do it. I've tried using tcpdump on the webservers: sudo /usr/sbin/tcpdump -q -i eth0 dst port 3306 and this is the output for a page request with a ton of selects: 10:32:36.570930 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 0 10:32:36.576805 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 0 10:32:36.577201 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 0 10:32:36.577980 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 86 10:32:36.578186 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 21 10:32:36.578359 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 27 10:32:36.578522 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 5 10:32:36.578741 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 13 10:32:36.579611 IP web2.mydomain.com.57524 > db1.mydomain.com.mysql: tcp 29 10:32:36.588201 IP web2.mydomain.com.45978 > db2.mydomain.com.mysql: tcp 0 10:32:36.588323 IP web2.mydomain.com.45978 > db2.mydomain.com.mysql: tcp 0 10:32:36.588677 IP web2.mydomain.com.45978 > db2.mydomain.com.mysql: tcp 0 10:32:36.588784 IP web2.mydomain.com.45978 > db2.mydomain.com.mysql: tcp 86 It doesn't look like all the selects are going to the slave. Maybe this isn't the right way to test, anyone know a better way?

  Read the article

• Perl cron job stays running

  - by Dylan

  I'm currently using a cron job to have a Perl script that tells my Arduino to cycle my aquaponics system and all is well, except the Perl script doesn't die as intended. Here is my cron job: */15 * * * * /home/dburke/scripts/hal/bin/main.pl cycle And below is my Perl script: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $pid = fork(); my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { if ($args eq "cycle") { my $stop = 0; sleep(1); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); while ($stop == 0) { sleep(2); } die "Done."; } else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } } Why wouldn't it die from the statement die "Done.";? It runs fine from the command line and also interprets the 'cycle' argument fine. When it runs in cron it runs fine, however, the process never dies and while each process doesn't continue to cycle the system it does seem to be looping in some way due to the fact that it ups my system load very quickly. If you'd like more information, just ask. EDIT: I have changed to code to: #!/usr/bin/perl -w # Sample Perl script to transmit number # to Arduino then listen for the Arduino # to echo it back use strict; use Device::SerialPort; use Switch; use Time::HiRes qw ( alarm ); $|++; # Set up the serial port # 19200, 81N on the USB ftdi driver my $device = '/dev/arduino0'; # Tomoc has to use a different tty for testing #$device = '/dev/ttyS0'; my $port = new Device::SerialPort ($device) or die('Unable to open connection to device');; $port->databits(8); $port->baudrate(19200); $port->parity("none"); $port->stopbits(1); my $lastChoice = ' '; my $signalOut; my $args = shift(@ARGV); # Parent must wait for child to exit before exiting itself on CTRL+C if ($args eq "cycle") { open (LOG, '>>log.txt'); print LOG "Cycle started.\n"; my $stop = 0; sleep(2); $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; $stop = 1; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; print LOG "Alarm is being set.\n"; alarm (420); print LOG "Alarm is set.\n"; while ($stop == 0) { print LOG "In while-sleep loop.\n"; sleep(2); } print LOG "The loop has been escaped.\n"; die "Done."; print LOG "No one should ever see this."; } else { my $pid = fork(); $SIG{'INT'} = sub { waitpid($pid,0) if $pid != 0; exit(0); }; # What child process should do if($pid == 0) { # Poll to see if any data is coming in print "\nListening...\n\n"; while (1) { my $incmsg = $port->lookfor(9); # If we get data, then print it if ($incmsg) { print "\nFrom arduino: " . $incmsg . "\n\n"; } } } # What parent process should do else { sleep(1); my $choice = ' '; print "Please pick an option you'd like to use:\n"; while(1) { print " [1] Cycle [2] Relay OFF [3] Relay ON [4] Config [$lastChoice]: "; chomp($choice = <STDIN>); switch ($choice) { case /1/ { $SIG{ALRM} = sub { print "Expecting plant bed to be full; please check.\n"; $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2\n"; }; $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1\n"; print "Waiting for plant bed to fill...\n"; alarm (420); $lastChoice = $choice; } case /2/ { $signalOut = $port->write('2'); # Signal to set pin 3 low print "Sent cmd: 2"; $lastChoice = $choice; } case /3/ { $signalOut = $port->write('1'); # Signal to arduino to set pin 3 High print "Sent cmd: 1"; $lastChoice = $choice; } case /4/ { print "There is no configuration available yet. Please stab the developer."; } else { print "Please select a valid option.\n\n"; } } } } }

  Read the article

• Java Socket Closes After Connection?

  - by Matthew

  Why does this port/socket close once a connection has been made by a client? package app; import java.io.*; import java.net.*; public class socketServer { public static void main(String[] args) { int port = 3333; boolean socketBindedToPort = false; try { ServerSocket ServerSocketPort = new ServerSocket(port); System.out.println("SocketServer Set Up on Port: " + port); socketBindedToPort = true; if(socketBindedToPort == true) { Socket clientSocket = null; try { clientSocket = ServerSocketPort.accept();//This method blocks until a socket connection has been made to this port. System.out.println("Waiting for client connection on port:" + port); /** THE CLIENT HAS MADE A CONNECTION **/ System.out.println("CLIENT IS CONENCTED"); } catch (IOException e) { System.out.println("Accept failed: " + port); System.exit(-1); } } else { System.out.println("Socket did not bind to the port:" + port); } } catch(IOException e) { System.out.println("Could not listen on port: " + port); System.exit(-1); } } }

  Read the article

• Is there a way to attach Ruby Net::HTTP request to a specific IP address / network interface?

  - by Dan Sosedoff

  Hello, Im looking a way to use different IP addresses for each GET request with standard Net::HTTP library. Server has 5 ip addresses and assuming that some API`s are blocking access when request limit per IP is reached. So, only way to do it - use another server. I cant find anything about it in ruby docs. For example, curl allows you to attach it to specific ip address (in PHP): $req = curl_init($url) curl_setopt($req, CURLOPT_INTERFACE, 'ip.address.goes.here'; $result = curl_exec($req); Is there any way to do it with Net::HTTP library? As alternative - CURB (ruby curl binding). But it will be the latest thing i`ll try. Suggestions / Ideas?

  Read the article

• Are spurious TCP connections on port 53 a problem?

  - by Darren Greaves

  I run a server which amongst other things uses tinydns for DNS and axfrdns for handling transfer requests from our secondary DNS (another system). I understand that tinydns uses port 53 on UDP and axfrdns uses port 53 on TCP. I've configured axfrdns to only allow connections from my agreed secondary host. I run logcheck to monitor my logs and every day I see spurious connections on port 53 (TCP) from seemingly random hosts. They usually turn out to be from ADSL connections. My question is; are these innocent requests or a security risk? I am happy to block repeat offenders using iptables but don't want to block innocent users of one of the websites I host. Thanks, Darren.

  Read the article

• NLB 2 Windows Server 2003 Servers

  - by Paul Hinett

  I need to configure windows NLB on 2 dedicated servers I have. My main machine has been running for some time, with several domain names pointing to the servers primary IP address. Both servers have 2 NIC's installed, and both have several secondary public IP addresses available if needed? What IP address would I use for the cluster IP, does this IP need to be added to the IP list of both public NIC's ip address list? What IP addresses do I use for the host's dedicated IP? Please help, this is driving me nuts...i've taken down the server twice on accident today! Thank you in advance!

  Read the article

• Using the option port on my Watchguard Firebox as a 2nd gateway exit point?

  - by Donovan

  I'm working on a network project in witch I have to design our network to provide two different exit points. The points are differentiated by the path through the corporate network. One of them travels through some monitoring hardware the other does not. We have a Watchguard Firebox in use as our gateway. Currently the network side provides the unmonitored exit point. I was wondering if i hooked the option port to our lan at a point that would force traffic through the monitored path, would it cause any problems? Access to the unmonitored gateway port would be restricted by ip. That would force all others not authorized to point to the monitored gateway port. I thought with the above design i might be able to get away with not having to buy another firebox to achieve the design I want. Thanks, D

  Read the article

• Confusion about HSRP Groups

  - by Kyle Brandt

  If I have a router that has several LANs on it, and each of these LAN is attached to a second router, do I need to use different HSRP groups for each LAN? With this set up, each virtual gateway will be on a Layer 2 segment. And within a router, no interface will have multiple gateways. So, For example: Router 1: F0/0: ip address 192.168.1.2 255.255.255.0 standby ip 192.168.1.1 F2/0: ip address 192.168.2.2 255.255.255.0 standby ip 192.168.2.1 Router 2: F0/0: ip address 192.168.1.3 255.255.255.0 standby ip 192.168.1.1 F2/0: ip address 192.168.2.3 255.255.255.0 standby ip 192.168.2.1 Will this work, or do I need standby 1 ip 192.168.2.1 on the F2/0 interfaces? Since according to the RFC, the group number of the packet is in the HSRP multicast packets, my guess is that I don't need different groups, and that multiple groups are only needed when they are all on the same Layer 2 segment. However, I haven't been able to find this setup....

  Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >