Search Results

Search found 18781 results on 752 pages for 'ip port'.

Page 148/752 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

  • Python cannot go over internet network

    - by user1642826
    I am currently trying to work with python networking and I have reached a bit of a road block. I am not able to network with any computer but localhost, which is kind-of useless with what networking is concerned. I have tried on my local network, from one computer to another, and I have tried over the internet, both fail. The only time I can make it work is if (when running on the server's computer) it's ip is set as 'localhost' or '192.168.2.129' (computers ip). I have spent hours going over opening ports with my isp and have gotten nowhere, so I decided to try this forum. I have my windows firewall down and I have included some pictures of important screen shots. I have no idea what the problem is and this has spanned almost a year of calls to my isp. The computer, modem, and router have all been replaced in that time. Screen shots: import socket import threading import socketserver class ThreadedTCPRequestHandler(socketserver.BaseRequestHandler): def handle(self): data = self.request.recv(1024) cur_thread = threading.current_thread() response = "{}: {}".format(cur_thread.name, data) self.request.sendall(b'worked') class ThreadedTCPServer(socketserver.ThreadingMixIn, socketserver.TCPServer): pass def client(ip, port, message): sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.connect((ip, port)) try: sock.sendall(message) response = sock.recv(1024) print("Received: {}".format(response)) finally: sock.close() if __name__ == "__main__": # Port 0 means to select an arbitrary unused port HOST, PORT = "192.168.2.129", 9000 server = ThreadedTCPServer((HOST, PORT), ThreadedTCPRequestHandler) ip, port = server.server_address # Start a thread with the server -- that thread will then start one # more thread for each request server_thread = threading.Thread(target=server.serve_forever) # Exit the server thread when the main thread terminates server_thread.daemon = True server_thread.start() print("Server loop running in thread:", server_thread.name) ip = '12.34.56.789' print(ip, port) client(ip, port, b'Hello World 1') client(ip, port, b'Hello World 2') client(ip, port, b'Hello World 3') server.shutdown() I do not know where the error is occurring. I get this error: Traceback (most recent call last): File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 43, in <module> client(ip, port, b'Hello World 1') File "C:\Users\Dr.Frev\Desktop\serverTest.py", line 18, in client sock.connect((ip, port)) socket.error: [Errno 10061] No connection could be made because the target machine actively refused it Any help will be greatly appreciated. *if this isn't a proper forum for this, could someone direct me to a more appropriate one.

    Read the article

  • How copy with shell commands(Linux) from 1 computer have (permanent url + open port) to 2 computer (secure way)?

    - by BenBen
    How copy with shell commands(Linux) from remote(my office computer) computer (permanent url + open port) to my (home) computer home/remote_computer_user/Desktop/test1.txt to my home computer home/home_computer_user/Downloads/ ? What I am doing: 1. ssh <user>@<computer1address> -p <port> :: success to get remote computer shell () 2. (I think I should use scp , but I dont how exactly in my case) Please if you can, write the exact commands that i should to from the shell Thanks in advance

    Read the article

  • Not able to connect to port 80 using telnet?

    - by pranitkothari
    When I try to connect my Windows PC with telnet, its giving me following error. Welcome to Microsoft Telnet Client Escape Character is 'CTRL+]' Microsoft Telnet open 192.168.220.135 80 Connecting To 192.168.220.135...Could not open connection to the host, on port 8 0: Connect failed Microsoft Telnet I have firewall off for both the machines. Can you please suggest how to connect to port 80 using telnet. Thanks.

    Read the article

  • Davicom Semiconductor, Inc. 21x4x DEC-Tulip not detected by Wireshark but IP operational

    - by deepsix86
    Recently flipped to Ubuntu 11.10 on a Dell 4300 (Intel). Getting IP address and no issues (ping/surf) but Wireshark unable to detect eth0 interface. I see references in forums to blacklist tulip but looks like I am running dmfe. Not sure if the blacklist is required and where to go from here. Maybe Driver update? Got a little lost looking in that area. Some h/w details below (IP/MAC/HOSTNAME removed) Linux xxxxxx 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 17:34:21 UTC 2012 i686 i686 i386 GNU/Linux network-admin (HOSTS TAB) does not list eth0, only loopback and bunch of IPv6 interfaces ifconfig eth0 Link encap:Ethernet HWaddr xxxxxxxx inet addr:192.168.x.xx Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: xxxxxxxxxxx 64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:36662 errors:0 dropped:1 overruns:0 frame:0 TX packets:24975 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:42115779 (42.1 MB) TX bytes:3056435 (3.0 MB) Interrupt:18 Base address:0xe800 lspci 02:09.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 31) Subsystem: Device 4554:434e Flags: bus master, medium devsel, latency 64, IRQ 18 I/O ports at e800 [size=256] Memory at fe1ffc00 (32-bit, non-prefetchable) [size=256] Expansion ROM at fe200000 [disabled] [size=256K] Capabilities: [50] Power Management version 2 Kernel driver in use: dmfe Kernel modules: dmfe hwinfo --netcard 20: PCI 209.0: 0200 Ethernet controller [Created at pci.318] Unique ID: rBUF.0NgK5ZS9c0D Parent ID: 6NW+.siohrLUzzI4 SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:09.0 SysFS BusID: 0000:02:09.0 Hardware Class: network Model: "Davicom 21x4x DEC-Tulip compatible 10/100 Ethernet" Vendor: pci 0x1282 "Davicom Semiconductor, Inc." Device: pci 0x9102 "21x4x DEC-Tulip compatible 10/100 Ethernet" SubVendor: pci 0x4554 SubDevice: pci 0x434e Revision: 0x31 Driver: "dmfe" Driver Modules: "dmfe" Device File: eth0 I/O Ports: 0xe800-0xe8ff (rw) Memory Range: 0xfe1ffc00-0xfe1ffcff (rw,non-prefetchable) Memory Range: 0xfe200000-0xfe23ffff (ro,non-prefetchable,disabled) IRQ: 18 (61379 events) HW Address: 00:08:a1:01:35:70 Link detected: yes Module Alias: "pci:v00001282d00009102sv00004554sd0000434Ebc02sc00i00" Driver Info #0: Driver Status: dmfe is active Driver Activation Cmd: "modprobe dmfe" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #11 (PCI bridge)

    Read the article

  • Is it possible to use 3G internet for a TCP/IP game server?

    - by Amit Ofer
    I'm working on a turned based multiplayer android game with a friend. I started working on the game server and client using socket programming. I found a few tutorials on how to implement a basic chat on android and I started extending that example to suit my needs. Basically the game is really simple and the communication only include sending a few string from the client to the server every turn and sending the calculated scores back to all the clients after each turn. the idea is that one of the players creates the game and thus initialize the server, and each player connects to this client using ip. I tried this solution and it seems to work great when all the players are using the same wifi connection or by using router port forwarding. The problem is when trying to use 3G internet for the server, I guess the problem is that 3G ip address isn't global and you can't use port forwarding there, correct me if I'm wrong here. Is there a way to overcome this issue? or the only solution is to limit my game to wifi only or think of a different solution than the standard socket programming solution? I.E web server etc. what do you think would be the best approach here? Thanks.

    Read the article

  • ant ftp doesn't download files in subdirectories

    - by Kristof Neirynck
    Hello, I'm trying to download files in subdirectories from an ftp server with ant. The exact set of files is known. Some of them are in subdirectories. Ant only seems to download the ones in the root directory. It does work if I download all files without listing them. The first ftp action should do the exact same thing as the second. Instead it complains about "Hidden files" and seems to prefix the paths with "\\". Does anyone know what's wrong here? Is this a bug in commons-net? build.xml <?xml version="1.0" encoding="utf-8"?> <project name="example" default="example" basedir="."> <taskdef name="ftp" classname="org.apache.tools.ant.taskdefs.optional.net.FTP" /> <target name="example"> <!-- 2 files retrieved --> <ftp action="get" verbose="true" server="localhost" userid="example" password="example"> <fileset dir="downloads" casesensitive="false" includes="root1.txt,root2.txt,a/a.txt,a/b/ab.txt,c/c.txt" /> </ftp> <!-- 5 files retrieved --> <ftp action="get" verbose="true" server="localhost" userid="example" password="example"> <fileset dir="downloads" casesensitive="false" includes="**/*" /> </ftp> </target> </project> run_ant.bat @ECHO OFF PUSHD %~dp0 SET CLASSPATH= SET ANT_HOME=C:\apache-ant-1.8.0 SET ant=%ANT_HOME%\bin\ant.bat SET antoptions=-nouserlib -noclasspath -d SET ftpjars=^ -lib lib\jakarta-oro-2.0.8.jar ^ -lib lib\commons-net-2.0.jar CALL %ant% %antoptions% %ftpjars% > output.txt POPD output.txt Unable to locate tools.jar. Expected to find it in C:\PROGRA~1\Java\jre6\lib\tools.jar Apache Ant version 1.8.0 compiled on February 1 2010 Trying the default build file: build.xml Buildfile: G:\ftp\build.xml Adding reference: ant.PropertyHelper Detected Java version: 1.6 in: C:\PROGRA~1\Java\jre6 Detected OS: Windows 7 Adding reference: ant.ComponentHelper Setting ro project property: ant.file -> G:\ftp\build.xml Setting ro project property: ant.file.type -> file Adding reference: ant.projectHelper Adding reference: ant.parsing.context Adding reference: ant.targets parsing buildfile G:\ftp\build.xml with URI = file:/G:/ftp/build.xml Setting ro project property: ant.project.name -> example Adding reference: example Setting ro project property: ant.project.default-target -> example Setting ro project property: ant.file.example -> G:\ftp\build.xml Setting ro project property: ant.file.type.example -> file Project base dir set to: G:\ftp +Target: +Target: example Adding reference: ant.LocalProperties parsing buildfile jar:file:/C:/apache-ant-1.8.0/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/C:/apache-ant-1.8.0/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file Class org.apache.tools.ant.taskdefs.optional.net.FTP loaded from parent loader (parentFirst) Setting ro project property: ant.project.invoked-targets -> example Attempting to create object of type org.apache.tools.ant.helper.DefaultExecutor Adding reference: ant.executor Build sequence for target(s) `example' is [example] Complete build sequence is [example, ] example: [ftp] Opening FTP connection to localhost [ftp] connected [ftp] logging in to FTP server [ftp] login succeeded [ftp] getting files fileset: Setup scanner in dir G:\ftp\downloads with patternSet{ includes: [root1.txt, root2.txt, a/a.txt, a/b/ab.txt] excludes: [] } will try to cd to A where a directory called a exists testing case sensitivity, attempting to cd to A remote system is case sensitive : false [ftp] Hidden file \\a\b\ assumed to not be a symlink. filelist map used in listing files filelist map used in listing files [ftp] Hidden file \\a\b\ assumed to not be a symlink. filelist map used in listing files filelist map used in listing files filelist map used in listing files filelist map used in listing files filelist map used in listing files [ftp] Hidden file \\a\a.txt assumed to not be a symlink. filelist map used in listing files [ftp] Hidden file \\a\a.txt assumed to not be a symlink. filelist map used in listing files filelist map used in listing files filelist map used in listing files [ftp] transferring root1.txt to G:\ftp\downloads\root1.txt [ftp] File G:\ftp\downloads\root1.txt copied from localhost [ftp] transferring root2.txt to G:\ftp\downloads\root2.txt [ftp] File G:\ftp\downloads\root2.txt copied from localhost [ftp] 2 files retrieved [ftp] disconnecting [ftp] Opening FTP connection to localhost [ftp] connected [ftp] logging in to FTP server [ftp] login succeeded [ftp] getting files fileset: Setup scanner in dir G:\ftp\downloads with patternSet{ includes: [**/*] excludes: [] } will try to cd to A where a directory called a exists testing case sensitivity, attempting to cd to A remote system is case sensitive : false [ftp] transferring a\a.txt to G:\ftp\downloads\a\a.txt [ftp] File G:\ftp\downloads\a\a.txt copied from localhost [ftp] transferring a\b\ab.txt to G:\ftp\downloads\a\b\ab.txt [ftp] File G:\ftp\downloads\a\b\ab.txt copied from localhost [ftp] transferring c\c.txt to G:\ftp\downloads\c\c.txt [ftp] File G:\ftp\downloads\c\c.txt copied from localhost [ftp] transferring root1.txt to G:\ftp\downloads\root1.txt [ftp] File G:\ftp\downloads\root1.txt copied from localhost [ftp] transferring root2.txt to G:\ftp\downloads\root2.txt [ftp] File G:\ftp\downloads\root2.txt copied from localhost [ftp] 5 files retrieved [ftp] disconnecting BUILD SUCCESSFUL Total time: 0 seconds server log (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> Connected, sending welcome message... (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220-FileZilla Server version 0.9.34 beta (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220-written by Tim Kosse ([email protected]) (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220 Please visit http://sourceforge.net/projects/filezilla/ (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> USER example (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 331 Password required for example (000153) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> PASS ******* (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 230 Logged on (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> TYPE I (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Type set to I (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> SYST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 215 UNIX emulated by FileZilla (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,232 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD A (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/A" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD a (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD b (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD //a/b (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,233 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,234 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD //\\a\b\ (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD //\\a\b\ (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/a/b" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD a (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD //a (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/a" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,235 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,236 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> RETR root1.txt (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,237 (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> RETR root2.txt (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> QUIT (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> 221 Goodbye (000153) 7/05/2010 19:46:12 - example (127.0.0.1)> disconnected. (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> Connected, sending welcome message... (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220-FileZilla Server version 0.9.34 beta (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220-written by Tim Kosse ([email protected]) (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 220 Please visit http://sourceforge.net/projects/filezilla/ (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> USER example (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> 331 Password required for example (000154) 7/05/2010 19:46:12 - (not logged in) (127.0.0.1)> PASS ******* (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 230 Logged on (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> TYPE I (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Type set to I (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> SYST (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 215 UNIX emulated by FileZilla (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,239 (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD A (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/A" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PWD (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 257 "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> PORT 127,0,0,1,207,240 (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:12 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD a (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,241 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD //a/ (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/a" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD b (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/a/b" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,242 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CDUP (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 CDUP successful. "/a" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CDUP (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 CDUP successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD c (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/c" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,243 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> LIST (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for directory list. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CDUP (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 CDUP successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CDUP (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 CDUP successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> CWD / (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 250 CWD successful. "/" is current directory. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,244 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR a/a.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,245 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR a/b/ab.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,246 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR c/c.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,247 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR root1.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> PORT 127,0,0,1,207,248 (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 200 Port command successful (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> RETR root2.txt (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 150 Opening data channel for file transfer. (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 226 Transfer OK (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> QUIT (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> 221 Goodbye (000154) 7/05/2010 19:46:13 - example (127.0.0.1)> disconnected.

    Read the article

  • HP SmartArray P400: How to repair failed logical drive?

    - by TegtmeierDE
    I have a HP Server with SmartArray P400 controller (incl. 256 MB Cache/Battery Backup) with a logicaldrive with replaced failed physicaldrive that does not rebuild. This is how it looked when I detected the error: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, Failed) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) unassigned physicaldrive 2I:1:8 (port 2I:box 1:bay 8, SATA, 750 GB, OK) ~# I thought that I had drive 2I:1:8 configured as a spare for Array A and Array B, but it seems this was not the case :-(. I noticed the problem due to I/O errors on the host, even if only 1 physicaldrive of the RAID5 is failed. Does someone know why this could happen? The logicaldrive should go into "Degraded" mode but still be fully accessible from the host os!? I first tried to add the unassigned drive 2I:1:8 as a spare to logicaldrive 2, but this was not possible: ~# /usr/sbin/hpacucli ctrl slot=0 array B add spares=2I:1:8 Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# Interestingly it is possible to add the unassigned drive to the first array without problems. I thought maybe the controller put the array into "failed" state due to the missing spare and protects failed arrays from modification. So I tried was to reenable the logicaldrive (to add the spare afterwards): ~# /usr/sbin/hpacucli ctrl slot=0 ld 2 modify reenable Warning: Any previously existing data on the logical drive may not be valid or recoverable. Continue? (y/n) y Error: This operation is not supported with the current configuration. Use the "show" command on devices to show additional details about the configuration. ~# But as you can see, re-enabling the logicaldrive this was not possible. Now I replaced the failed drive by hotswapping it with the unassigned drive. The status now looks like this: ~# /usr/sbin/hpacucli ctrl slot=0 show config Smart Array P400 in Slot 0 (Embedded) (sn: XXXX) array A (SATA, Unused Space: 0 MB) logicaldrive 1 (698.6 GB, RAID 1, OK) physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SATA, 750 GB, OK) physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SATA, 750 GB, OK) array B (SATA, Unused Space: 0 MB) logicaldrive 2 (2.7 TB, RAID 5, Failed) physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SATA, 750 GB, OK) physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SATA, 750 GB, OK) physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SATA, 750 GB, OK) physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SATA, 750 GB, OK) physicaldrive 2I:1:7 (port 2I:box 1:bay 7, SATA, 750 GB, OK) ~# The logical drive is still not accessible. Why is it not rebuilding? What can I do? FYI, this is the configuration of my controller: ~# /usr/sbin/hpacucli ctrl slot=0 show Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Serial Number: XXXX Cache Serial Number: XXXX RAID 6 (ADG) Status: Enabled Controller Status: OK Chassis Slot: Hardware Revision: Rev E Firmware Version: 5.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Analysis Inconsistency Notification: Disabled Raid1 Write Buffering: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Accelerator Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True ~# Thanks for you help in advance.

    Read the article

  • Postfix log.... spam attempt?

    - by luri
    I have some weird entries in my mail.log. What I'd like to ask is if postfix is avoiding correctly (according with the main.cf attached below) what seems to be relay attempts, presumably for spamming, or if I can enhance it's security somehow. Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: connect from catv-80-99-46-143.catv.broadband.hu[80.99.46.143] Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: warning: non-SMTP command from catv-80-99-46-143.catv.broadband.hu[80.99.46.143]: GET / HTTP/1.1 Feb 2 11:53:25 MYSERVER postfix/smtpd[9094]: disconnect from catv-80-99-46-143.catv.broadband.hu[80.99.46.143] Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max connection rate 1/60s for (smtp:80.99.46.143) at Feb 2 11:53:25 Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max connection count 1 for (smtp:80.99.46.143) at Feb 2 11:53:25 Feb 2 11:56:45 MYSERVER postfix/anvil[9097]: statistics: max cache size 1 at Feb 2 11:53:25 Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: connect from vs148181.vserver.de[62.75.148.181] Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: warning: non-SMTP command from vs148181.vserver.de[62.75.148.181]: GET / HTTP/1.1 Feb 2 12:09:19 MYSERVER postfix/smtpd[9302]: disconnect from vs148181.vserver.de[62.75.148.181] Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max connection rate 1/60s for (smtp:62.75.148.181) at Feb 2 12:09:19 Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max connection count 1 for (smtp:62.75.148.181) at Feb 2 12:09:19 Feb 2 12:12:39 MYSERVER postfix/anvil[9304]: statistics: max cache size 1 at Feb 2 12:09:19 Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: connect from unknown[202.46.129.123] Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: warning: non-SMTP command from unknown[202.46.129.123]: GET / HTTP/1.1 Feb 2 14:17:02 MYSERVER postfix/smtpd[10847]: disconnect from unknown[202.46.129.123] Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max connection rate 1/60s for (smtp:202.46.129.123) at Feb 2 14:17:02 Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max connection count 1 for (smtp:202.46.129.123) at Feb 2 14:17:02 Feb 2 14:20:22 MYSERVER postfix/anvil[10853]: statistics: max cache size 1 at Feb 2 14:17:02 Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: warning: 95.110.224.230: hostname host230-224-110-95.serverdedicati.aruba.it verification failed: Name or service not known Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: connect from unknown[95.110.224.230] Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: lost connection after CONNECT from unknown[95.110.224.230] Feb 2 20:57:33 MYSERVER postfix/smtpd[18452]: disconnect from unknown[95.110.224.230] Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max connection rate 1/60s for (smtp:95.110.224.230) at Feb 2 20:57:33 Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max connection count 1 for (smtp:95.110.224.230) at Feb 2 20:57:33 Feb 2 21:00:53 MYSERVER postfix/anvil[18455]: statistics: max cache size 1 at Feb 2 20:57:33 Feb 2 21:13:44 MYSERVER pop3d: Connection, ip=[::ffff:219.94.190.222] Feb 2 21:13:44 MYSERVER pop3d: LOGIN FAILED, user=admin, ip=[::ffff:219.94.190.222] Feb 2 21:13:50 MYSERVER pop3d: LOGIN FAILED, user=test, ip=[::ffff:219.94.190.222] Feb 2 21:13:56 MYSERVER pop3d: LOGIN FAILED, user=danny, ip=[::ffff:219.94.190.222] Feb 2 21:14:01 MYSERVER pop3d: LOGIN FAILED, user=sharon, ip=[::ffff:219.94.190.222] Feb 2 21:14:07 MYSERVER pop3d: LOGIN FAILED, user=aron, ip=[::ffff:219.94.190.222] Feb 2 21:14:12 MYSERVER pop3d: LOGIN FAILED, user=alex, ip=[::ffff:219.94.190.222] Feb 2 21:14:18 MYSERVER pop3d: LOGIN FAILED, user=brett, ip=[::ffff:219.94.190.222] Feb 2 21:14:24 MYSERVER pop3d: LOGIN FAILED, user=mike, ip=[::ffff:219.94.190.222] Feb 2 21:14:29 MYSERVER pop3d: LOGIN FAILED, user=alan, ip=[::ffff:219.94.190.222] Feb 2 21:14:35 MYSERVER pop3d: LOGIN FAILED, user=info, ip=[::ffff:219.94.190.222] Feb 2 21:14:41 MYSERVER pop3d: LOGIN FAILED, user=shop, ip=[::ffff:219.94.190.222] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: warning: 71.6.142.196: hostname db4142196.aspadmin.net verification failed: Name or service not known Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: connect from unknown[71.6.142.196] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: lost connection after CONNECT from unknown[71.6.142.196] Feb 3 06:49:29 MYSERVER postfix/smtpd[25834]: disconnect from unknown[71.6.142.196] Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max connection rate 1/60s for (smtp:71.6.142.196) at Feb 3 06:49:29 Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max connection count 1 for (smtp:71.6.142.196) at Feb 3 06:49:29 Feb 3 06:52:49 MYSERVER postfix/anvil[25837]: statistics: max cache size 1 at Feb 3 06:49:29 I have Postfix 2.7.1-1 running on Ubuntu 10.10. This is my (modified por privacy) main.cf: smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key myhostname = mymailserver.org alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = mymailserver.org, MYSERVER, localhost relayhost = mynetworks = 127.0.0.0/8, 192.168.1.0/24 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all home_mailbox = Maildir/ smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,reject_unauth_destination mailbox_command = smtpd_sasl_local_domain = smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_tls_security_level = may smtpd_tls_auth_only = no smtp_tls_note_starttls_offer = yes smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom smtp_tls_security_level = may

    Read the article

  • Why the server is not responding?

    - by par
    Hello! Our server occasionally refuses to serve a simple HTML page. This is happening during a relatively high number of requests. However, the processor is not heavy loaded and there are a lot of free memory. The error seems to occure 1 out of 50 requests in average, depending on the server load. I need to find the source of the problem and take the appropriate actions to eliminate it. I have a suspicion that the problem source is a huge number of incoming network packets. There are 5000 packets per second on average. Traffic - 2 MBits/sec Can this be the cause of the error? There is an interesting thing, in case the server fails to respond, the request string is not logged to access.log by Apache. The error is repeatable from several client computers. DNS is not involved, since I have accessed the server by the IP. I have profiled the problem case with tcpdump utility. These are the good and bad sessions traced by tcpdump. The request is the same in both experiments. Good - server returns response. Bad - no response, time-out error. ---- Bad ---- 12:23:36.366292 IP 123.45.67.890.61749 > myserver.superbservers.com.www: S 2125316338:2125316338(0) win 8192 <mss 1460,nop,wscale 2,nop,nop,sackOK> 12:23:39.362394 IP 123.45.67.890.61749 > myserver.superbservers.com.www: S 2125316338:2125316338(0) win 8192 <mss 1460,nop,wscale 2,nop,nop,sackOK> 12:23:45.365567 IP 123.45.67.890.61749 > myserver.superbservers.com.www: S 2125316338:2125316338(0) win 8192 <mss 1460,nop,nop,sackOK> -------- ---- Good ---- 12:27:07.632229 IP 123.45.67.890.63914 > myserver.superbservers.com.www: S 3581365570:3581365570(0) win 8192 <mss 1460,nop,wscale 2,nop,nop,sackOK> 12:27:10.620946 IP 123.45.67.890.63914 > myserver.superbservers.com.www: S 3581365570:3581365570(0) win 8192 <mss 1460,nop,wscale 2,nop,nop,sackOK> 12:27:10.620969 IP myserver.superbservers.com.www > 123.45.67.890.63914: S 2654770980:2654770980(0) ack 3581365571 win 5840 <mss 1460,nop,nop,sackOK,nop,wscale 6> 12:27:10.838747 IP 123.45.67.890.63914 > myserver.superbservers.com.www: . ack 1 win 4380 12:27:10.957143 IP 123.45.67.890.63914 > myserver.superbservers.com.www: P 1:213(212) ack 1 win 4380 12:27:10.957152 IP myserver.superbservers.com.www > 123.45.67.890.63914: . ack 213 win 108 12:27:10.965543 IP myserver.superbservers.com.www > 123.45.67.890.63914: P 1:630(629) ack 213 win 108 12:27:10.965621 IP myserver.superbservers.com.www > 123.45.67.890.63914: F 630:630(0) ack 213 win 108 12:27:11.183540 IP 123.45.67.890.63914 > myserver.superbservers.com.www: . ack 631 win 4222 12:27:11.185657 IP 123.45.67.890.63914 > myserver.superbservers.com.www: F 213:213(0) ack 631 win 4222 12:27:11.185663 IP myserver.superbservers.com.www > 123.45.67.890.63914: . ack 214 win 108 -------- Hoster: SuperbHosting OS: Ubuntu Server parameters: E6300 CONROE 1.86GHZ 2 X 1MB CACHE 1066 1GB DDR2 667MHZ This is a link to apache configuration file we use http://repkin5.snow.prohosting.com/apache.txt This is server-status report taken right after time-out error. http://repkin5.snow.prohosting.com/server-status.htm There are only 10 Child Servers running out of 120, so enough space for new requests. VMSTAT procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 8900 725900 8468 65684 0 0 5 18 11 33 4 3 92 1

    Read the article

  • Transparent proxy which preserves client mac address

    - by A G
    I have a customer that wants to intercept SSL traffic as it leaves their network. My proposed solution is to setup a proxy that is transparent and both layer 2 and layer 3 so it can simply be dropped into their network without any change in config required. The proxy has two NICs, one connected to the server, the other to the client. The client, proxy and gateway are under control of the customer, the server is not. For example: client --- Proxy --- gateway -|- server I have my proxy program configured with IP_TRANSPARENT socket option to it can respond to connections destined for a remote IP. I am using the following setup: iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY --on-port 3128 --tproxy-mark 1/1 iptables -t mangle -A PREROUTING -p tcp -j MARK --set-mark 1 ip rule add fwmark 1/1 table 1 ip route add local 0.0.0.0/0 dev lo table 1 The client in question is on its own subnet and has been configured so that the proxy is the default gateway. The result is: Client sends a frame to the proxy; source IP is client, source mac is client, destination IP is server, destination mac is proxy Proxy forwards this frame to the gateway; source IP is proxy, source mac is proxy, destination IP is server, destination mac is gateway Gateway forwards this to the server and gets a response back. Gateway sends reply back to proxy; source IP is server, source mac is gateway, destination IP is proxy, destination mac is proxy Proxy forwards this reply to client; source IP is server, source mac is proxy, destination IP is client, destination mac is client. The tproxy and iptables configuration lets the proxy send packets with a non local ip address. Is there a way to make something transparent at the mac address level? That is, put the client on the same subnet as the gateway. The gateway sees the source IP and mac as that of the client, even though they originated from the proxy. Could this be done by configuring the proxy as a bridge then use ebtables to escalate the traffic to be handled by iptables? When I use ebtables to push something up to iptables, it appears my proxy program doesn't respond to the packets as they are destined for the gateways's mac address, not the proxy's. What are some other potential avenues I could investigate? EDIT: When the client and gateway are on different subnets (and client has set the proxy as the gateway), it works as described in 1 to 5. But I want to know if it is possible to have the client and gateway on the same subnet and have the proxy fully transparent (ie client is not aware of the proxy). Thanks! EDIT 2: I can configure the proxy as a bridge using brctl, but cannot find a way to direct this traffic to my proxy program - asked here Possible for linux bridge to intercept traffic?. Currently, with the description numbered 1 to 5, it operates at layer 3; it is transparent on the client side (client thinks it is talking to the server's IP), but not on the gateway side (gateway is talking to the proxy's IP). What I want to find out is, is it possible to make this operate at layer 2, so it is fully transparent? What are the available options I should research? Thanks

    Read the article

  • Friday Tips #6, Part 1

    - by Chris Kawalek
    We have a two parter this week, with this post focusing on desktop virtualization and the next one on server virtualization. Question: Why would I use the Oracle Secure Global Desktop Secure Gateway? Answer by Rick Butland, Principal Sales Consultant, Oracle Desktop Virtualization: Well, for the benefit of those who might not be familiar with client connections in Oracle Secure Global Desktop (SGD), let me back up and briefly explain. An SGD client connects to an SGD server using two distinct protocols, which, by default, require two distinct TCP ports. The first is the HTTP protocol, used by the web browser to connect to the SGD webserver on TCP port 80, or if secure connections are enabled (SSL/TLS), then TCP port 443, commonly identified as the "HTTPS" port, that is, "SSL encrypted HTTP." The second protocol from the client to the server is the Adaptive Internet Protocol, or AIP, which is used for displaying applications, transferring drive mapping data, print jobs, and so on. By default, AIP uses the TCP port 3104, or port 5307 when SSL is enabled. When SGD clients need to access SGD over a firewall, the ports that AIP requires are typically "closed"; and most administrators are reluctant, to put it mildly, to change their firewall configurations to allow AIP traffic on 3144/5307.   To avoid this problem, SGD introduced "Firewall Forwarding", a technique where, in effect, both http and AIP traffic are "multiplexed" onto a single "well-known" TCP port, that is port 443, the https port.  This is also known as single-port firewall traversal.  This technique takes advantage of the fact that, as a "well-known service", port 443 is usually "open",   allowing (encrypted) traffic to pass. At the target SGD server, the two protocols are de-multiplexed and routed appropriately. The Secure Gateway was developed in response to requirements from customers for SGD to support multi-stage DMZ's, and to avoid exposing SGD servers and the information they contain directly to connections from the Internet. The Secure Gateway acts as a reverse-proxy in the first-tier of the DMZ, accepting, authenticating, and terminating incoming client connections, and then re-encrypting the connections, and proxying them, routing them on to SGD servers, deeper in the network. The client no longer needs to know the name/IP address of the SGD servers in their network, they connect to the gateway, only. The gateway takes care of those internal network details.     The Secure Gateway supports the same "single-port firewall" capability as does "Firewall Forwarding", but offers the additional advantage of load-balancing incoming client connections amongst SGD array members, which could be cumbersome without a forward-deployed secure gateway. Load-balancing weights and policies can be monitored and tuned using the "Balancer Manager" application, and Apache mod_proxy_balancer directives.   Going forward, our architects recommend the use of the Secure Gateway over "Firewall Forwarding" for single-port firewall traversal, due to its architectural advantages, its greater flexibility and enhanced features.  Finally, it should be noted that the Secure Gateway is not separately priced; any licensed SGD customer may use the Secure Gateway component at no additional cost.   For more information, see the "Secure Gateway Administrator's Guide".

    Read the article

  • ovs-vsctl: "eth0" is not a valid UUID

    - by Przemek Lach
    I'm trying to setup an open v-switch inside my Ubuntu 12.04 Server VM. I have created three interfaces for this VM and I want to create a port mirror inside of the VM using these there interfaces and open v-switch. There are three Host-Only Adapters: eth0, eth1, eth2. The idea is that three other VM's will be connected to these adapters. One of these VM's will stream UDP video to eth0 and I want the vswitch'd VM to mirror those packets from eth0 onto eth1 and eth2. Each of the VM's connected to eth1 and eth2 will get the same video stream. I performed the following steps to install open v-switch: $ apt-get install python-simplejson python-qt4 python-twisted-conch automake autoconf gcc uml-utilities libtool build-essential $ apt-get install build-essential autoconf automake pkg-config $ wget http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ tar xf http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ cd http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ apt-get install libssl-dev iproute tcpdump linux-headers-`uname -r` $ ./boot.sh $ ./configure - -with-linux=/lib/modules/`uname -r`/build $ make $ sudo make install After installation I configured as follows: $ insmod datapath/linux/openvswitch.ko $ sudo touch /usr/local/etc/ovs-vswitchd.conf $ mkdir -p /usr/local/etc/openvswitch $ ovsdb-tool create /usr/local/etc/openvswitch/conf.db Then I started the server: $ ovsdb-server /usr/local/etc/openvswitch/conf.db \ --remote=punix:/usr/local/var/run/openvswitch/db.sock \ --remote=db:Open_vSwitch,manager_options \ --private-key=db:SSL,private_key \ --certificate=db:SSL,certificate \ --bootstrap-ca-cert=db:SSL,ca_cert --pidfile --detach --log-file $ ovs-vsctl –no-wait init (run only once) $ ovs-vswitchd --pidfile --detach The above steps I got from this tutorial and it all worked fine. I then proceeded to add a port mirror based on the open v-switch documentation under Port Mirroring. I successfully completed the following commands: $ ovs-vsctl add-br br0 $ ovs-vsctl add-port br0 eth0 $ ovs-vsctl add-port br0 eth1 $ ovs-vsctl add-port br0 eth2 $ ifconfig eth0 promisc up $ ifconfig eth1 promisc up $ ifconfig eth2 promisc up At this point when I run ovs-vsctl show I get the following: 75bda8c2-b870-438b-9115-e36288ea1cd8 Bridge "br0" Port "br0" Interface "br0" type: internal Port "eth0" Interface "eth0" Port "eth2" Interface "eth2" Port "eth1" Interface "eth1" And when I run ifconfig I get the following: eth0 Link encap:Ethernet HWaddr 08:00:27:9f:51:ca inet6 addr: fe80::a00:27ff:fe9f:51ca/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth1 Link encap:Ethernet HWaddr 08:00:27:53:02:d4 inet6 addr: fe80::a00:27ff:fe53:2d4/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth2 Link encap:Ethernet HWaddr 08:00:27:cb:a5:93 inet6 addr: fe80::a00:27ff:fecb:a593/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth3 Link encap:Ethernet HWaddr 08:00:27:df:bb:d8 inet addr:192.168.1.139 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fedf:bbd8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2211 errors:0 dropped:0 overruns:0 frame:0 TX packets:1196 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:182987 (182.9 KB) TX bytes:125441 (125.4 KB) NOTE: I use eth3 as a bridge adapter for SSH'ing into the VM. So now, I think I've done everything correctly but when I try to create the bridge using the following command: $ ovs-vsctl -- set Bridge br0 mirrors=@m -- --id=@eth0 get Port eth0 -- --id=@eth1 get Port eth1 -- --id=@m create Mirror name=app1Mirror select-dst-port=eth0 select-src-port=@eth0 output-port=@eth1,eth2 I get the following error: ovs-vsctl: "eth0" is not a valid UUID I don't understand why it's not able to find the interfaces?

    Read the article

  • Returning a 404 page when a folder is accessed from one domain, but allowing access from other domains and IP addresses

    - by okw
    Situation: I want to return a 404 page ("404.php") when a folder ("hidden") is accessed from the example.com domain. I want the same folder to be accessible from a subdomain ("hidden.example.com") or from a different domain ("hidden.com") which are both configured in a single VirtualHost entry. The server has multiple IP addresses that it listens on. Each IP address serves identical content from the example.com domain (sharing a VirtualHost entry.) I want the folder to be accessible from the IP address. The server is configured to use SSL/TLS/HTTPS. HTTPS is optional on example.com, but HTTPS is enforced in the .htaccess file for the hidden folder using a rewrite rule shown below. /www/hidden/.htaccess RewriteCond %{HTTPS} !=on RewriteRule .* https://%{SERVER_NAME}%{REQUEST_URI} [R,L] I know that {SERVER_ADDR} gives the server's IP address, but does it return the one that the client is requesting from? I'm also starting to think that something in the VirtualHosts file would be more appropriate. Any thoughts on this? What should be allowed: http://87.65.43.21/hidden/ https://87.65.43.21/hidden/ http://12.34.56.78/hidden/ https://12.34.56.78/hidden/ http://hidden.example.com/ https://hidden.example.com/ http://hidden.com/ https://hidden.com/ http://www.hidden.com/ https://www.hidden.com/ What should be 404-ed with 404.php http://example.com/hidden/ https://example.com/hidden/ http://www.example.com/hidden/ https://www.example.com/hidden/ http://example.com/hidden/hiddenfile.php https://example.com/hidden/hiddenfile.php etc. Thanks.

    Read the article

  • Find the IP of the router between me and main router/gateway?

    - by Crash893
    I have a Netgear router that is the main router/gateway in and out of the network. Then I have a Linksys 54g router with WiFi that we use as are main WiFi access point The Cat5 runs from the router to the WiFi routers LAN port (not WAN). And then if you connect to that WAP you are basically on the network. I want to be able to find out what the IP address of that WAP is but so far I can't figure out how to: I've tried doing a tracert to the gateway IP but I get nothing. I've scanned all the IP addressed in the network. I've gone to the Netgear main router and looked under attached devices but it doesn't say anything. Any ideas on how I can figure out how to administer it? (I do have limited physical access but my attempt to plug into it came back with a faulty IP (in the 169 range where the rest of the office is 192.168...). I never set this router up to begin with so I'm reluctant to just kill it with the reset button because I can't get into see what the settings are set to.

    Read the article

  • Failure to obtain IP with ARP over Wi-Fi with personal Wi-Fi router in client mode

    - by axk
    I'm trying to connect a Samsung TV to the Internet using a TL-MR3020 personal wireless router in client mode. The TV fails to connect to the network. It sees the ethernet cable connected though. Here's my network topology: Here's what I've captured with Wireshark filtering for ARP (eth.type == 0x0806): It appears the TV fails to get the IP of the gateway (DSL modem/router) for some reason. One thing I've noticed is that the source MAC for the ARP requests coming from the TV is the MAC of the Portable wireless router (that is cd:89:00), not the TV itself and the modem sends the responses to that MAC (I'm not an expert and don't know if its okay or it may make the TV fail to get the requested IP). Also I'm able to ping the TV from the DSL router (through the telnet interface) and the router has an entry in its MAC table for the TV's IP with the Portable wireless router's MAC (that is cd:89:00). If I'm able to ping the TV I suppose it should know the router's MAC to respond to the ping, but then why these continuous ARP requests... I've also tried to connect my desktop trough this Portable wireless router the same way I'm trying to connect the TV and it works fine, I can set the DSL Modem's IP as the default gateway on the desktop's NIC and connect to the Internet. The TV can connect to the Internet when connected to the DSL Router with a wired connection. Any suggestions on what may be the cause of the problem / how to further debug it are welcome. Thanks!

    Read the article

  • When a server IP changes, do exising TCP (e.g. http/mysql) connections remain running

    - by Luke Cousins
    We have some PHP-FPM servers and when they need a database connection, they connect to an HAProxy server which selects them a database server to use and the connection opens. When we then want to perform some maintenance on the HAProxy servers (such as config changes requiring an HAProxy restart), the process is as follows: Shutdown Keepalived on the HAProxy server Wait for the floating IP to transfer to the backup HAProxy server (also running Keepalived) Wait until HAProxy stats is reporting just one connection (us checking how many connections there are) Restart HAProxy Restart Keepalived As step 2 occurs, what will happen to the open mysql connections at that point? According to this TCP Sessions and IP Changes question the connections will be dropped. Is this really the case? If so, what, if anything, can be done to prevent this happening? Can the connection be in some way forced to use the main (non-floating) IP of the server? We also have a similar setup with two Nginx servers with Keepalived running on them and we were planning on doing the equivalent process. If we do, the same question applies - what happens to the existing http connections when the IP moves to the other server? I appreciate your help.

    Read the article

  • How can I ensure that my static ip address is read from /etc/network/interfaces rather than dhcp?

    - by jonderry
    This is a follow up to the following question. I'm trying to set a static IP by changing /etc/network/interfaces to the following: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.2.133 netmask 255.255.255.0 gateway 192.168.2.1 dns-nameservers 8.8.8.8 and then running /sbin/ifdown eth0; /sbin/ifup eth0. However, the change in IP address doesn't appear to take effect without editing /etc/dhcp/dhclient.conf and commenting out the following before running ifdown; ifup: request subnet-mask, broadcast-address, time-offset, routers, domain-name, domain-name-servers, domain-search, host-name, dhcp6.name-servers, dhcp6.domain-search, netbios-name-servers, netbios-scope, interface-mtu, rfc3442-classless-static-routes, ntp-servers, dhcp6.fqdn, dhcp6.sntp-servers; Strangely, after commenting out this line, running ifdown; ifup works, but when I uncomment it, the behavior does not revert to the previous behavior of ignoring changes to my settings in /etc/network/interfaces (this doesn't seem like a problem, but I really need to be able to repeat this problem so that I can be confident that my solution is robust) Also, I'd rather not have to edit /etc/dhcp/dhclient.conf to change my static IP since it seems I should be able to do this by only editing interfaces. Can anyone explain the issues I'm seeing above and suggest the best way of making changes to static IP addresses take effect that admits reproducibility so that I can be sure that my approach works?

    Read the article

  • Ubuntu 9.10 and Squid 2.7 Transparent Proxy TCP_DENIED

    - by user298814
    Hi, We've spent the last two days trying to get squid 2.7 to work with ubuntu 9.10. The computer running ubuntu has two network interfaces: eth0 and eth1 with dhcp running on eth1. Both interfaces have static ip's, eth0 is connected to the Internet and eth1 is connected to our LAN. We have followed literally dozens of different tutorials with no success. The tutorial here was the last one we did that actually got us some sort of results: http://www.basicconfig.com/linuxnetwork/setup_ubuntu_squid_proxy_server_beginner_guide. When we try to access a site like seriouswheels.com from the LAN we get the following message on the client machine: ERROR The requested URL could not be retrieved Invalid Request error was encountered while trying to process the request: GET / HTTP/1.1 Host: www.seriouswheels.com Connection: keep-alive User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US) AppleWebKit/532.9 (KHTML, like Gecko) Chrome/5.0.307.11 Safari/532.9 Cache-Control: max-age=0 Accept: application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,/;q=0.5 Accept-Encoding: gzip,deflate,sdch Cookie: __utmz=88947353.1269218405.1.1.utmccn=(direct)|utmcsr=(direct)|utmcmd=(none); __qca=P0-1052556952-1269218405250; __utma=88947353.1027590811.1269218405.1269218405.1269218405.1; __qseg=Q_D Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Some possible problems are: Missing or unknown request method. Missing URL. Missing HTTP Identifier (HTTP/1.0). Request is too large. Content-Length missing for POST or PUT requests. Illegal character in hostname; underscores are not allowed. Your cache administrator is webmaster. Below are all the configuration files: /etc/squid/squid.conf, /etc/network/if-up.d/00-firewall, /etc/network/interfaces, /var/log/squid/access.log. Something somewhere is wrong but we cannot figure out where. Our end goal for all of this is the superimpose content onto every page that a client requests on the LAN. We've been told that squid is the way to do this but at this point in the game we are just trying to get squid setup correctly as our proxy. Thanks in advance. squid.conf acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/32 acl to_localhost dst 127.0.0.0/8 acl localnet src 192.168.0.0/24 acl SSL_ports port 443 # https acl SSL_ports port 563 # snews acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow localhost http_access allow localnet http_access deny all icp_access allow localnet icp_access deny all http_port 3128 hierarchy_stoplist cgi-bin ? cache_dir ufs /var/spool/squid/cache1 1000 16 256 access_log /var/log/squid/access.log squid refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern (Release|Package(.gz)*)$ 0 20% 2880 refresh_pattern . 0 20% 4320 acl shoutcast rep_header X-HTTP09-First-Line ^ICY.[0-9] upgrade_http0.9 deny shoutcast acl apache rep_header Server ^Apache broken_vary_encoding allow apache extension_methods REPORT MERGE MKACTIVITY CHECKOUT cache_mgr webmaster cache_effective_user proxy cache_effective_group proxy hosts_file /etc/hosts coredump_dir /var/spool/squid access.log 1269243042.740 0 192.168.1.11 TCP_DENIED/400 2576 GET NONE:// - NONE/- text/html 00-firewall iptables -F iptables -t nat -F iptables -t mangle -F iptables -X echo 1 | tee /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -j MASQUERADE iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 3128 networking auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 142.104.109.179 netmask 255.255.224.0 gateway 142.104.127.254 auto eth1 iface eth1 inet static address 192.168.1.100 netmask 255.255.255.0

    Read the article

  • What needs to be done to port a Windows Flash game to Android?

    - by Russell Yan
    My team has developed a game using Flash (with Lua embeded) that targets Windows. And we want to port that game to Android (also iOS in the future). It's acceptable to rewrite the Flash part of client. And some other team in our company recommended Unity3D to replace the Flash part. Since we have no experience in Android/iOS development, we would need to learn some new tool/language anyway. So we would like that learning still be useful after the porting and when we starting a new game. Any thoughts? Edits: I think it is worth noticing the background of the game : the project is started by a tester and developer, both without knowing much about flex and actionscript. They built the game while learning, so most of the code is hard to maintain. I and other two developers joined the project after a year or so when one has leave (and the other be our manager). The other two developers are just graduates with little experience and little knowledge of flex. I am good at the server part and the c# language. Based on the fact that the code is hard to maintain (and we do need to change a lot of code to make the game easier to playe in a mobile device), and I am good at c# (and learning). I still tend to do the porting with Unity, which could get better performance and possibly save time.

    Read the article

  • How to control messages to the same port from different emitters?

    - by Alex In Paris
    Scene: A company has many factories X, each emits a message to the same receive port in a Biztalk server Y; if all messages are processed without much delay, each will trigger an outgoing message to another system Z. Problem: Sometimes a factory loses its connection for a half-day or more and, when the connection is reestablished, thousands of messages get emitted. Now, the messages still get processed well by Y (Biztalk can easily handle the load) but system Z can't handle the flood and may lock up and severely delay the processing of all other messages from the other X. What is the solution? Creating multiple receive locations that permits us to pause one X or another would lose us information if the factory isn't smart enough to know whether the message was received or not. What is the basic pattern to apply in Biztalk for this problem? Would some throttling parameters help to limit the flow from any one X? Or are their techniques on the end part of Y which I should use instead ? I would prefer this last one since I can be confident that the message box will remember any failures, which could then be resumed.

    Read the article

  • 11gR2???---gipc????

    - by Allen Gao
    Normal 0 7.8 ? 0 2 false false false EN-US ZH-CN X-NONE DefSemiHidden="true" DefQFormat="false" DefPriority="99" LatentStyleCount="267" UnhideWhenUsed="false" QFormat="true" Name="Normal"/ UnhideWhenUsed="false" QFormat="true" Name="heading 1"/ UnhideWhenUsed="false" QFormat="true" Name="Title"/ UnhideWhenUsed="false" QFormat="true" Name="Subtitle"/ UnhideWhenUsed="false" QFormat="true" Name="Strong"/ UnhideWhenUsed="false" QFormat="true" Name="Emphasis"/ UnhideWhenUsed="false" Name="Table Grid"/ UnhideWhenUsed="false" QFormat="true" Name="No Spacing"/ UnhideWhenUsed="false" Name="Light Shading"/ UnhideWhenUsed="false" Name="Light List"/ UnhideWhenUsed="false" Name="Light Grid"/ UnhideWhenUsed="false" Name="Medium Shading 1"/ UnhideWhenUsed="false" Name="Medium Shading 2"/ UnhideWhenUsed="false" Name="Medium List 1"/ UnhideWhenUsed="false" Name="Medium List 2"/ UnhideWhenUsed="false" Name="Medium Grid 1"/ UnhideWhenUsed="false" Name="Medium Grid 2"/ UnhideWhenUsed="false" Name="Medium Grid 3"/ UnhideWhenUsed="false" Name="Dark List"/ UnhideWhenUsed="false" Name="Colorful Shading"/ UnhideWhenUsed="false" Name="Colorful List"/ UnhideWhenUsed="false" Name="Colorful Grid"/ UnhideWhenUsed="false" Name="Light Shading Accent 1"/ UnhideWhenUsed="false" Name="Light List Accent 1"/ UnhideWhenUsed="false" Name="Light Grid Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 1"/ UnhideWhenUsed="false" QFormat="true" Name="List Paragraph"/ UnhideWhenUsed="false" QFormat="true" Name="Quote"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Quote"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 1"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 1"/ UnhideWhenUsed="false" Name="Dark List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 1"/ UnhideWhenUsed="false" Name="Colorful List Accent 1"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 1"/ UnhideWhenUsed="false" Name="Light Shading Accent 2"/ UnhideWhenUsed="false" Name="Light List Accent 2"/ UnhideWhenUsed="false" Name="Light Grid Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 2"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 2"/ UnhideWhenUsed="false" Name="Dark List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 2"/ UnhideWhenUsed="false" Name="Colorful List Accent 2"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 2"/ UnhideWhenUsed="false" Name="Light Shading Accent 3"/ UnhideWhenUsed="false" Name="Light List Accent 3"/ UnhideWhenUsed="false" Name="Light Grid Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 3"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 3"/ UnhideWhenUsed="false" Name="Dark List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 3"/ UnhideWhenUsed="false" Name="Colorful List Accent 3"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 3"/ UnhideWhenUsed="false" Name="Light Shading Accent 4"/ UnhideWhenUsed="false" Name="Light List Accent 4"/ UnhideWhenUsed="false" Name="Light Grid Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 4"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 4"/ UnhideWhenUsed="false" Name="Dark List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 4"/ UnhideWhenUsed="false" Name="Colorful List Accent 4"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 4"/ UnhideWhenUsed="false" Name="Light Shading Accent 5"/ UnhideWhenUsed="false" Name="Light List Accent 5"/ UnhideWhenUsed="false" Name="Light Grid Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 5"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 5"/ UnhideWhenUsed="false" Name="Dark List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 5"/ UnhideWhenUsed="false" Name="Colorful List Accent 5"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 5"/ UnhideWhenUsed="false" Name="Light Shading Accent 6"/ UnhideWhenUsed="false" Name="Light List Accent 6"/ UnhideWhenUsed="false" Name="Light Grid Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Shading 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium List 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 1 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 2 Accent 6"/ UnhideWhenUsed="false" Name="Medium Grid 3 Accent 6"/ UnhideWhenUsed="false" Name="Dark List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Shading Accent 6"/ UnhideWhenUsed="false" Name="Colorful List Accent 6"/ UnhideWhenUsed="false" Name="Colorful Grid Accent 6"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Emphasis"/ UnhideWhenUsed="false" QFormat="true" Name="Subtle Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Intense Reference"/ UnhideWhenUsed="false" QFormat="true" Name="Book Title"/ classid="clsid:38481807-CA0E-42D2-BF39-B33AF135CC4D" id=ieooui st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:????; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} ??????,????11gR2 ??????gipcd(????ora.gipcd)????,????gipc???,????????????? ????,??oracle????,??????????,??????????,???????????cache fusion ?????????????,?????????????oracle????????????,??????,???????(?????????Note 220970.1:RAC: Frequently Asked Questions,?????????)???????,???????????/????,?????????????? ??,?10gR2 ?11gR1????,?????????????,??:Linux bonding, AIX EtherChannel, HP-UX APA ???????????????????????????????(??,????????????????,???????)???????10g ?11.1 ??????,??????????????????(???????),????????????????subnet??????,????,?????oracle???????????,??????????????,???????????,??????????????,??????????????????????,??:????,?????? ?????????,?11gR2??(????,?11.2.0.2??),oracle??????????????,?????gipc(Grid IPC)???,??????????gipcd.bin?????????,??????? 1. ??????,????????????,?????????,?????????gpnp profile??????????????????? 2. ???????????,??????????,???????????????? 3. ?????????????,?????????/???????????,????????,???????? ??,oracle????????????????????????/??????,??,?????????? ??,???????????????,?????gipc ?HAIP????????????,??????????????,???????????????????:?????????,??:ocssd.bin????,crsd.bin??????;???:oracle RAC ??,??:ASM ??????,?????????????,?????????????????????gipc,???????????,?????????????????????,????????????????,?????,????????????,??,?????????????????gipc???,oracle ??????????????,??????????????,????????????????,HAIP ????,????oracle RAC??????/?????????,????????????????,????,????????HAIP?????,????????????ASM??,?????(???NM??)??????????,?????????????????HAIP,????????,????,???????? “Redundant Interconnect with Highly Available IP (HAIP) ??”? ???,???????????????????????? 1.??????gipcd.log 2013-07-17 12:28:28.071: [ default][3041003216]gipcd START pid=22337 Oracle Grid IPC Daemon 2013-07-17 12:28:28.072: [ GIPCD][3041003216] gipcdMain: gipcd Started <<<<<< gipcd????????? …… 2013-07-17 12:28:29.046: [ GPNP][3041003216]clsgpnp_getCachedProfileEx: [at clsgpnp.c:613] Result: (26) CLSGPNP_NO_PROFILE. Can't get offline GPnP service profile: local gpnpd is up and running. Use getProfile instead. 2013-07-17 12:28:29.046: [ GPNP][3041003216]clsgpnp_getCachedProfileEx: [at clsgpnp.c:623] Result: (26) CLSGPNP_NO_PROFILE. Failed to get offline GPnP service profile. 2013-07-17 12:28:29.066: [ GPNP][3041003216]clsgpnpm_newWiredMsg: [at clsgpnpm.c:741] Msg-reply has soap fault 10 (Operation returned Retry (error CLSGPNP_CALL_AGAIN)) [uri "http://www.grid-pnp.org/2005/12/gpnp-errors#"] <<<< gipcd ????gpnp profile?????????log??GI??????,?????????,?????gpnpd???????? …… 2013-07-17 12:28:39.342: [ CLSINET][3023027088] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 12:28:39.342: [ CLSINET][3023027088] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' <<<<< gipcd ????????????????,???????2??????????? …… 2013-07-17 12:28:39.344: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.30' 2013-07-17 12:28:39.344: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.30:46782' 2013-07-17 12:28:39.345: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.31' 2013-07-17 12:28:39.345: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.31:39332' <<<<<<< gipcd ????????(????????????????)?endpoint ????? …… 2013-07-17 12:28:56.767: [GIPCHGEN][3023027088] gipchaNodeCreate: adding new node 0x9c107d8 { host 'single2', haName 'gipcd_ha_name', srcLuid 465fb26d-8b46eb95, dstLuid 00000000-00000000 numInf 0, contigSeq 0, lastAck 0, lastValidAck 0, sendSeq [0 : 0], createTime 797327224, flags 0x0 } <<<<< ???????? …… 2013-07-17 12:28:58.415: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created remote interface for node 'single2', haName 'gipcd_ha_name', inf 'udp://192.168.254.33:16663' 2013-07-17 12:28:58.415: [GIPCHGEN][3025128336] gipchaWorkerAttachInterface: Interface attached inf 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x6 } 2013-07-17 12:28:58.415: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created remote interface for node 'single2', haName 'gipcd_ha_name', inf 'udp://192.168.254.32:17578' 2013-07-17 12:28:58.415: [GIPCHGEN][3025128336] gipchaWorkerAttachInterface: Interface attached inf 0x9c0a900 { host 'single2', haName 'gipcd_ha_name', local 0xb4cb8eb8, ip '192.168.254.32:17578', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x6 } <<<<<< gipcd ??????????????? …… 2013-07-17 12:29:36.120: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth1 - rank 99, avgms 6.326531 [ 257 / 250 / 245 ] 2013-07-17 12:29:36.120: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 1] eth2 - rank 99, avgms 5.182186 [ 259 / 250 / 247 ] <<<<<gipcd ??????????? ……  2. ?????????down???gipcd.log? 2013-07-17 13:23:20.346: [ CLSINET][3027229584] Returning NETDATA: 2 interfaces 2013-07-17 13:23:20.346: [ CLSINET][3027229584] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:20.346: [ CLSINET][3027229584] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:20.359: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth1 - rank 99, avgms 1.560694 [ 171 / 173 / 173 ] 2013-07-17 13:23:20.359: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 1] eth2 - rank 99, avgms 1.802326 [ 172 / 172 / 172 ] <<<<<<<< gipcd ?????????? …… +++????“ifconfig eth1 down”????????????? …… 2013-07-17 13:23:44.397: [ CLSINET][3027229584] # 0 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:23:44.397: [GIPCDMON][3027229584] gipcdMonitorUpdate: interface went down - [ ip 192.168.254.30, subnet 192.168.254.0, mask 255.255.255.0 ] 2013-07-17 13:23:44.397: [GIPCDMON][3027229584] gipcdMonitorUpdate: msg sent to client thread (([update(ip: 192.168.254.30, mask: 255.255.255.0, subnet 192.168.254.0), state(gipcdadapterstateDown)])) <<<<<<<< gipcd ????eth1 down?,???????(??:ocssd.bin)????? …… 2013-07-17 13:23:44.426: [GIPCHGEN][3025128336] gipchaInterfaceDisable: disabling interface 0xb4c4e590 { host '', haName 'gipcd_ha_name', local (nil), ip '192.168.254.30', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 1, flags 0x1cd } 2013-07-17 13:23:44.428: [GIPCHGEN][3025128336] gipchaInterfaceDisable: disabling interface 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0x86 } 2013-07-17 13:23:44.428: [GIPCHALO][3025128336] gipchaLowerCleanInterfaces: performing cleanup of disabled interface 0x9c0bb60 { host 'single2', haName 'gipcd_ha_name', local 0xb4c4e590, ip '192.168.254.33:16663', subnet '192.168.254.0', mask '255.255.255.0', numRef 0, numFail 0, flags 0xa6 } <<<<<<<<gipcd ????????eth1 ???,????????????????????? …… 2013-07-17 13:24:08.747: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth2 - rank 99, avgms 1.955307 [ 204 / 181 / 179 ] <<<<<<<gipcd ???????????? ??:??????,??????????????????,????????????????,???????????eth1??HAIP,?failover?eth2 ?,????,????ASM??????? 3. ???eht1???? ++ ????”ifconfig eth1 up”????eth1 2013-07-17 13:36:31.260: [GIPCDMON][3027229584] gipcdMonitorUpdate: New Interface found - [ ip 192.168.254.30, subnet 192.168.254.0, mask 255.255.255.0 ] 2013-07-17 13:36:31.260: [GIPCDMON][3027229584] gipcdMonitorUpdate: msg sent to client thread (([update(ip: 192.168.254.30, mask: 255.255.255.0, subnet 192.168.254.0), state(gipcdadapterstateUp)])) <<<<< gpicd ?????????? …… 2013-07-17 13:36:31.471: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local bootstrap interface for node 'single1', haName 'gipcd_ha_name', inf 'mcast://230.0.1.0:42424/192.168.254.30' 2013-07-17 13:36:31.471: [GIPCHTHR][3025128336] gipchaWorkerUpdateInterface: created local interface for node 'single1', haName 'gipcd_ha_name', inf '192.168.254.30:55548' <<<<<< ?????endpoint???? …… 2013-07-17 13:37:11.493: [ CLSINET][3027229584] Returning NETDATA: 2 interfaces 2013-07-17 13:37:11.493: [ CLSINET][3027229584] # 0 Interface 'eth1',ip='192.168.254.30',mac='00-0c-29-a8-14-65',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:37:11.493: [ CLSINET][3027229584] # 1 Interface 'eth2',ip='192.168.254.31',mac='00-0c-29-a8-14-6f',mask='255.255.255.0',net='192.168.254.0',use='cluster_interconnect' 2013-07-17 13:37:11.510: [GIPCDMON][3027229584] gipcdMonitorSaveInfMetrics: inf[ 0] eth2 - rank 99, avgms 6.141304 [ 307 / 184 / 184 ] <<<<<<<< <<<<<<<< gipcd??????? ??:??????,??????????????????,????????????????,????????failover?eth2??HAIP,?????eth1 ?,????,????ASM??????? ??,????????,gipcd ???????????,??,????????,?????????(????)????,gipcd???????????,??????HAIP???,???????????????(??:Linux bonding,etherchannel?),???????????,????????? ??????????????11gR2 ??????gipcd????,????????????,?????????? ??????????,???????????,??“??:11gR2???---gipc????"?

    Read the article

  • MySQL hangs if connection comes from outside the LAN

    - by Subito
    I have a MySQL Server operating just fine if I access him from his local LAN (192.168.100.0/24). If I try to access hin from another LAN (192.168.113.0/24 in this case) it hangs for a really long time before delivering the result. SHOW PROCESSLIST; shows this process in Sleep, State empty. If I strace -p this process I get the following Output (23512 is the PID of the corresponding mysqld process): Process 23512 attached - interrupt to quit restart_syscall(<... resuming interrupted call ...>) = 1 fcntl(10, F_GETFL) = 0x2 (flags O_RDWR) fcntl(10, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(10, {sa_family=AF_INET, sin_port=htons(51696), sin_addr=inet_addr("192.168.113.4")}, [16]) = 33 fcntl(10, F_SETFL, O_RDWR) = 0 rt_sigaction(SIGCHLD, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, ) = 0 getpeername(33, {sa_family=AF_INET, sin_port=htons(51696), sin_addr=inet_addr("192.168.113.4")}, [16]) = 0 getsockname(33, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 open("/etc/hosts.allow", O_RDONLY) = 64 fstat(64, {st_mode=S_IFREG|0644, st_size=580, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(64, "# /etc/hosts.allow: list of host"..., 4096) = 580 read(64, "", 4096) = 0 close(64) = 0 munmap(0x7f9ce9839000, 4096) = 0 open("/etc/hosts.deny", O_RDONLY) = 64 fstat(64, {st_mode=S_IFREG|0644, st_size=880, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(64, "# /etc/hosts.deny: list of hosts"..., 4096) = 880 read(64, "", 4096) = 0 close(64) = 0 munmap(0x7f9ce9839000, 4096) = 0 getsockname(33, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 fcntl(33, F_SETFL, O_RDONLY) = 0 fcntl(33, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(33, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 setsockopt(33, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 fcntl(33, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(33, SOL_IP, IP_TOS, [8], 4) = 0 setsockopt(33, SOL_TCP, TCP_NODELAY, [1], 4) = 0 futex(0x7f9cea5c9564, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f9cea5c9560, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f9cea5c6fe0, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1) = 1 ([{fd=10, revents=POLLIN}]) fcntl(10, F_GETFL) = 0x2 (flags O_RDWR) fcntl(10, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(10, {sa_family=AF_INET, sin_port=htons(51697), sin_addr=inet_addr("192.168.113.4")}, [16]) = 31 fcntl(10, F_SETFL, O_RDWR) = 0 rt_sigaction(SIGCHLD, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, {SIG_DFL, [CHLD], SA_RESTORER|SA_RESTART, 0x7f9ce7ca34f0}, ) = 0 getpeername(31, {sa_family=AF_INET, sin_port=htons(51697), sin_addr=inet_addr("192.168.113.4")}, [16]) = 0 getsockname(31, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 open("/etc/hosts.allow", O_RDONLY) = 33 fstat(33, {st_mode=S_IFREG|0644, st_size=580, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(33, "# /etc/hosts.allow: list of host"..., 4096) = 580 read(33, "", 4096) = 0 close(33) = 0 munmap(0x7f9ce9839000, 4096) = 0 open("/etc/hosts.deny", O_RDONLY) = 33 fstat(33, {st_mode=S_IFREG|0644, st_size=880, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9ce9839000 read(33, "# /etc/hosts.deny: list of hosts"..., 4096) = 880 read(33, "", 4096) = 0 close(33) = 0 munmap(0x7f9ce9839000, 4096) = 0 getsockname(31, {sa_family=AF_INET, sin_port=htons(3306), sin_addr=inet_addr("192.168.100.190")}, [16]) = 0 fcntl(31, F_SETFL, O_RDONLY) = 0 fcntl(31, F_GETFL) = 0x2 (flags O_RDWR) setsockopt(31, SOL_SOCKET, SO_RCVTIMEO, "\36\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 setsockopt(31, SOL_SOCKET, SO_SNDTIMEO, "<\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", 16) = 0 fcntl(31, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(31, SOL_IP, IP_TOS, [8], 4) = 0 setsockopt(31, SOL_TCP, TCP_NODELAY, [1], 4) = 0 futex(0x7f9cea5c9564, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x7f9cea5c9560, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x7f9cea5c6fe0, FUTEX_WAKE_PRIVATE, 1) = 1 poll([{fd=10, events=POLLIN}, {fd=12, events=POLLIN}], 2, -1^C <unfinished ...> Process 23512 detached This output repeats itself until the answer gets send. It could take up to 15 Minutes until the request gets served. In the local LAN its a matter of Milliseconds. Why is this and how can I debug this further? [Edit] tcpdump shows a ton of this: 14:49:44.103107 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [S.], seq 1434117703, ack 1793610733, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 14:49:44.135187 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 106:145, ack 182, win 4345, length 39 14:49:44.135293 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [P.], seq 182:293, ack 145, win 115, length 111 14:49:44.167025 IP 192.168.X.6.64624 > cassandra-test.mysql: Flags [.], ack 444, win 4280, length 0 14:49:44.168933 IP 192.168.X.6.64626 > cassandra-test.mysql: Flags [.], ack 1, win 4390, length 0 14:49:44.169088 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [P.], seq 1:89, ack 1, win 115, length 88 14:49:44.169672 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 145:171, ack 293, win 4317, length 26 14:49:44.169726 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [P.], seq 293:419, ack 171, win 115, length 126 14:49:44.275111 IP 192.168.X.6.64626 > cassandra-test.mysql: Flags [P.], seq 1:74, ack 89, win 4368, length 73 14:49:44.275131 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [.], ack 74, win 115, length 0 14:49:44.275149 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 171:180, ack 419, win 4286, length 9 14:49:44.275189 IP cassandra-test.mysql > 192.168.X.6.64626: Flags [P.], seq 89:100, ack 74, win 115, length 11 14:49:44.275264 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [P.], seq 180:185, ack 419, win 4286, length 5 14:49:44.275281 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [.], ack 185, win 115, length 0 14:49:44.275295 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [F.], seq 419, ack 185, win 115, length 0 14:49:44.275650 IP 192.168.X.6.64625 > cassandra-test.mysql: Flags [F.], seq 185, ack 419, win 4286, length 0 14:49:44.275660 IP cassandra-test.mysql > 192.168.X.6.64625: Flags [.], ack 186, win 115, length 0 14:49:44.275910 IP 192.168.X.6.64627 > cassandra-test.mysql: Flags [S], seq 2336421549, win 8192, options [mss 1351,nop,wscale 2,nop,nop,sackOK], length 0 14:49:44.275921 IP cassandra-test.mysql > 192.168.X.6.64627: Flags [S.], seq 3289359778, ack 2336421550, win 14600, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0

    Read the article

  • Unable to logon to vpn

    - by nitin pande
    My openvpn client log file- The interesting bit: Tue Oct 26 12:32:49 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:49 2010 TCP/UDP: Closing socket The rest of the log just in case: Tue Oct 26 12:32:35 2010 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct 1 2006 Tue Oct 26 12:32:48 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:48 2010 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Oct 26 12:32:48 2010 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 12:32:48 2010 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 12:32:48 2010 LZO compression initialized Tue Oct 26 12:32:48 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:48 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:48 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:48 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:48 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:32:48 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:32:48 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:32:48 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 TLS: Initial packet from 67.228.223.12:3389, sid=bd5f79fe 8475497f Tue Oct 26 12:32:49 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:49 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:49 2010 TCP/UDP: Closing socket Tue Oct 26 12:32:49 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:32:49 2010 Restart pause, 5 second(s) Tue Oct 26 12:32:54 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:54 2010 Re-using SSL/TLS context Tue Oct 26 12:32:54 2010 LZO compression initialized Tue Oct 26 12:32:54 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:54 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:54 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:54 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:54 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:32:54 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 TLS: Initial packet from 67.228.223.12:3389, sid=1643b931 ce240d5f Tue Oct 26 12:32:54 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:32:54 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:32:54 2010 TCP/UDP: Closing socket Tue Oct 26 12:32:54 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:32:54 2010 Restart pause, 5 second(s) Tue Oct 26 12:32:59 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:32:59 2010 Re-using SSL/TLS context Tue Oct 26 12:32:59 2010 LZO compression initialized Tue Oct 26 12:32:59 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:32:59 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:32:59 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:32:59 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:32:59 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:00 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 TLS: Initial packet from 67.228.223.12:3389, sid=cd439fb2 d625ca0d Tue Oct 26 12:33:00 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:00 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:00 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:00 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:00 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:05 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:05 2010 Re-using SSL/TLS context Tue Oct 26 12:33:05 2010 LZO compression initialized Tue Oct 26 12:33:05 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:05 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:05 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:05 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:05 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:06 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 TLS: Initial packet from 67.228.223.12:3389, sid=28f0cb87 69c90cde Tue Oct 26 12:33:06 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:06 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:06 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:06 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:06 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:11 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:11 2010 Re-using SSL/TLS context Tue Oct 26 12:33:11 2010 LZO compression initialized Tue Oct 26 12:33:11 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:11 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:11 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:11 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:11 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:11 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 12:33:11 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 12:33:11 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 12:33:12 2010 TLS: Initial packet from 67.228.223.12:3389, sid=128becf9 f62adf0c Tue Oct 26 12:33:12 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 12:33:12 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 12:33:12 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:12 2010 SIGUSR1[soft,tls-error] received, process restarting Tue Oct 26 12:33:12 2010 Restart pause, 5 second(s) Tue Oct 26 12:33:17 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 12:33:17 2010 Re-using SSL/TLS context Tue Oct 26 12:33:17 2010 LZO compression initialized Tue Oct 26 12:33:17 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 12:33:17 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 12:33:17 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 12:33:17 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 12:33:17 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 12:33:20 2010 TCP/UDP: Closing socket Tue Oct 26 12:33:20 2010 SIGTERM[hard,init_instance] received, process exiting Guys I am extremely sorry for not presenting my error Log properly, please forgive me and give me your valuable advice. I am using windows 7 and I am using openvpn mainly to bypass censorship at UAE. I am using only client config file. Ca.crt file is in config folder Thanks and regards Nitin My error Log with Config1 file Tue Oct 26 21:24:34 2010 OpenVPN 2.0.9 Win32-MinGW [SSL] [LZO] built on Oct 1 2006 Tue Oct 26 21:24:46 2010 IMPORTANT: OpenVPN's default port number is now 1194, based on an official port number assignment by IANA. OpenVPN 2.0-beta16 and earlier used 5000 as the default port. Tue Oct 26 21:24:46 2010 Control Channel Authentication: using 'ta.key' as a OpenVPN static key file Tue Oct 26 21:24:46 2010 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 21:24:46 2010 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication Tue Oct 26 21:24:46 2010 LZO compression initialized Tue Oct 26 21:24:46 2010 Control Channel MTU parms [ L:1544 D:168 EF:68 EB:0 ET:0 EL:0 ] Tue Oct 26 21:24:46 2010 Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ] Tue Oct 26 21:24:46 2010 Local Options hash (VER=V4): 'ee93268d' Tue Oct 26 21:24:46 2010 Expected Remote Options hash (VER=V4): 'bd577cd1' Tue Oct 26 21:24:46 2010 Attempting to establish TCP connection with 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TCP connection established with 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TCPv4_CLIENT link local: [undef] Tue Oct 26 21:24:47 2010 TCPv4_CLIENT link remote: 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 TLS: Initial packet from 67.228.223.12:3389, sid=4244e662 e5a0572a Tue Oct 26 21:24:47 2010 TLS Error: cannot locate HMAC in incoming packet from 67.228.223.12:3389 Tue Oct 26 21:24:47 2010 Fatal TLS error (check_tls_errors_co), restarting Tue Oct 26 21:24:47 2010 TCP/UDP: Closing socket Tue Oct 26 21:24:47 2010 SIGUSR1[soft,tls-error] received, process restarting client config file: client dev tun proto tcp remote openvpn1.flashvpn.com 3389 float resolv-retry infinite nobind persist-key persist-tun ca ca.crt ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 auth-user-pass route-method exe route-delay 2

    Read the article

  • Does the Lenovo t60p vga port support an s-video signal?

    - by Matthijs Wessels
    I just bought a new television. The problem is it turns out it doesn't have a VGA port. It does have: s-video, component, hdmi and scart. My Lenovo t60p only has vga. If have search frantically for a solution and even though it seems I have sooo many options they are all dead ends. Or I keep ending up having to buy a 100 euro box to convert the signal. However, I found that some video cards support s-video through the vga port. It says look it up in your video cards documentation. I have a Lenovo t60p laptop with a ATI MOBILITY FireGl v5250. But I can't seem to get my hands on any documentation where this is supposed to be documented. I found this website: http://forum.notebookreview.com/showthread.php?t=179529&highlight=s-video There this guy says he thinks it's in the t60 but dropped in the t61, but suggests to the guy with the t60 that it won't work. I can't really conclude anything from that. Furthermore, I am not looking for the best of the best quality. So when I found this: *http://www.amazon.com/VideoSecu-Computor-Presentation-Converter-VGA2TV/dp/B000X3FAJU/ref=pd_cp_e_3_img I woudl be quite happy with this. Except that I don't think I can order it because I don't live in the US. Can anybody give me a definite answer, to whether the vga port of my lenovo t60p ati firegl v5250 supports s-video? So that I can just by a vga to s-video cable to achieve my goal.

    Read the article

  • How to set up port forwarding on a dedicated server running CentOS 5.4 to use Ubuntu 9.0.4

    - by mairtinh
    The basic situation that I have is a dedicated server running CentOS 5.4 At the moment I have one VM running Ubuntu 9.0.4. Later on, I will want to add another VM running Windows Server 2003 but at the moment I am focusing on getting Ubuntu up and running. The Ubuntu installation is working fine but I'm seriously struggling to get port forwarding working so that I can access websites to be hosted on the Ubuntu VM. As a newbie to Linux, I am confused about the relationship between IPTables and VMWare's own port forwarding. Here's what I've tried so far. The IP of my server is xxx.xxx.xxx.xxx and the provider support have told me that the subnet mask is 255.255.255.0, the gateway address is xxx.xxx.xxx.1 and the network address is xxx.xxx.xxx.0. (Those latter two surprise me a bit, I expected private gateway/network address rather than public ones.) First of all I tried Bridged Networking but had no success at all in communicating with the machine other than through the VMware console. I tried pinging it from the host (using ssh into the host) but no joy; also no Inernet access from the VM. I changed the interfaces configuration from DHCP to Static, using a static address of 192.168.1.100 and setting the gateway to xxx.xxx.xxx.1 as advised by the provider. No real difference, still cannot ping the guest from the host or vice versa and no Internet access from the guest. Then I tried NAT. The host automatically set the IP address to 192.168.132.128 with a gateway of 192.168.132.2 Now the guest has Internet access out and when I do a VNC to the host and open Firefox with 192.168.132.128 I can see the hosted website okay but I still cannot get into it from outside. I mentioned that I'm a bit confused about IPtables and VMware port forwarding, what I meant is that I'm not sure whether IPtable forwarding should be set to the IP address of the guest interface (192.168.132.128 in this case) or the gateway address 192.168.132.2 . I have a feeling that I'm missing something very simple here, can anybody tell me what it is?

    Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >