Search Results

Search found 12213 results on 489 pages for 'mapped drive'.

Page 145/489 | < Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >

  • Windows XP Installation problems

    - by Samurai Waffle
    I'm having trouble installing Windows XP on a computer... My friend gave me her old computer, it was riddled with viruses and ran extremely slow. I did my best to clean it out, and after a bit I discovered it had a boot sector virus. So I downloaded the Ultimate Boot CD (installed it on a flash drive), and ran Darik's nuke and boot to completely wipe the hard drive. I then tried to reinstall Windows XP from a USB drive... It doesn't work. The computer just stalls and never boots. The computers dvd drive doesn't work, so I borrowed a spare drive that another friend had, and tried to run a Windows XP cd. For a bit I got the stop 7B error, but now it just stalls like the USB drive does. Since then I've booted back into the Ultimate Boot CD, and ran partition magic. Repartitioned the Hard Drive, and copied the files on the Windows cd to the hard drive. I was wondering if there is any way I can make it run the setup.exe off the hard drive. I have the UBCD at my disposal, but have yet to come up with a way to do it. Any help is greatly appreciated.

    Read the article

  • Slow boot for OS and external devices

    - by Derek Van Cuyk
    I have been having this problem intermittently but as of yesterday, it has become more consistent. It originally started when I rebooted my PC at home and the OS (Windows 8) sat in a loop appearing to do nothing while loading. I figured since this was a new installation, that something may have just become corrupted and I decided to reinstall. So I tried to boot off of the thumb drive which had the installation iso and encountered pretty much the same issue. Same with the DVD drive. So, I rebooted once again and left it to load the entire night just to see if it ever would and sure enough this morning, Windows had finally loaded. Authentication had the same roblem albeit not quite as long (took about 5 minutes to authenticate). However, once I was in, everything appeared to be working fine and as quick as normal with the exception of when I tried to scan the C drive for any errors, which ran unbearably slow (45 minutes and before I left for work and was not finished scanning a 64GB SSD drive). I mention that I have had this issue but never when loading the OS. Before it occurred when trying to install windows 7 from a different DVD drive than the one I have now. It took me about 3 hours to do it since I had to wait sometimes 30+ min for each step to finish processing. Does anyone have an idea as to what can cause this? I am assuming it is the motherboard since it is responsible for communication with all the devices I'm having issues with but I cannot find anyone else who has had a problem like this and don't want to drop more money on a MB if it isn't the problem. Hardware: Motherboard: Asus M4A78T-E Socket AM3/ AMD 790GX/ Hybrid CrossFireX Hard Drive: Kingston SSDNow V+180 64GB Micro SATA II 3GB/S 1.8 Inch Solid State Drive SVP180S2/64G Optical Drive: Samsung Blu-Ray Combo Internal 12XReadable and DVD-Writable Drive with Lightscribe SH-B123L/BSBP Thanks, Derek

    Read the article

  • Hungry hungry BIOS: why do I have less than 4 GiB of memory?

    - by Rhymoid
    I thought I had 4 GiB of memory, but just to be sure, let's ask the BIOS about that: ?: sudo dmidecode --type 20 # dmidecode 2.12 SMBIOS 2.6 present. Handle 0x000B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Alright, 4 GiB it is. But I can't use all of it: ?: cat /proc/meminfo | head -n 1 MemTotal: 3913452 kB Somehow, somewhere, I lost 274 MiB. Where did 6% of my memory go? Now I know the address ranges in DMI are incorrect, because the ACPI memory map reports usable ranges well beyond the ending address of the second memory module: ?: dmesg | grep -E "BIOS-e820: .* usable" [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dee7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable I get pretty much the same info from /proc/iomem (except for the 4 kiB hole 0x000-0xFFF), which also shows that the kernel only accounts for less than 8 MiB. I guess 0x00000000-0x7FFFFFFF is indeed mapped to the first memory module, and 0x80000000-0xDFFFFFFF to part of the second memory module (a bunch of ACPI NVS things live between 0xDEE7C000 and 0xDEF30FFF, and the remaining 16-something MiB of that range are just 'reserved'). I guess the highest 0x18000000 bytes of the second memory module are mapped above the 4 GiB mark. But even then, there are two problems: 128 MiB (0x08000000 bytes, living somewhere between 0xE0000000 and 0xFFFFFFFF) are still completely unaccounted for. To note, my graphics card is on PCI-Express and (allegedly) has 1 GiB dedicated memory, so that shouldn't be the culprit. Did the BIOS screw up in moving the memory, leaving it partially shadowed by MMIO? Even with this mediocre explanation, I only 'found' 128 MiB. But /proc/meminfo is reporting a much larger deficit; where's the other 146 MiB? How does Linux count MemTotal?

    Read the article

  • How can I eager-load a child collection mapped to a non-primary key in NHibernate 2.1.2?

    - by David Rubin
    Hi, I have two objects with a many-to-many relationship between them, as follows: public class LeftHandSide { public LeftHandSide() { Name = String.Empty; Rights = new HashSet<RightHandSide>(); } public int Id { get; set; } public string Name { get; set; } public ICollection<RightHandSide> Rights { get; set; } } public class RightHandSide { public RightHandSide() { OtherProp = String.Empty; Lefts = new HashSet<LeftHandSide>(); } public int Id { get; set; } public string OtherProp { get; set; } public ICollection<LeftHandSide> Lefts { get; set; } } and I'm using a legacy database, so my mappings look like: Notice that LeftHandSide and RightHandSide are associated by a different column than RightHandSide's primary key. <class name="LeftHandSide" table="[dbo].[lefts]" lazy="false"> <id name="Id" column="ID" unsaved-value="0"> <generator class="identity" /> </id> <property name="Name" not-null="true" /> <set name="Rights" table="[dbo].[lefts2rights]"> <key column="leftId" /> <!-- THIS IS THE IMPORTANT BIT: I MUST USE PROPERTY-REF --> <many-to-many class="RightHandSide" column="rightProp" property-ref="OtherProp" /> </set> </class> <class name="RightHandSide" table="[dbo].[rights]" lazy="false"> <id name="Id" column="id" unsaved-value="0"> <generator class="identity" /> </id> <property name="OtherProp" column="otherProp" /> <set name="Lefts" table="[dbo].[lefts2rights]"> <!-- THIS IS THE IMPORTANT BIT: I MUST USE PROPERTY-REF --> <key column="rightProp" property-ref="OtherProp" /> <many-to-many class="LeftHandSide" column="leftId" /> </set> </class> The problem comes when I go to do a query: LeftHandSide lhs = _session.CreateCriteria<LeftHandSide>() .Add(Expression.IdEq(13)) .UniqueResult<LeftHandSide>(); works just fine. But LeftHandSide lhs = _session.CreateCriteria<LeftHandSide>() .Add(Expression.IdEq(13)) .SetFetchMode("Rights", FetchMode.Join) .UniqueResult<LeftHandSide>(); throws an exception (see below). Interestingly, RightHandSide rhs = _session.CreateCriteria<RightHandSide>() .Add(Expression.IdEq(127)) .SetFetchMode("Lefts", FetchMode.Join) .UniqueResult<RightHandSide>(); seems to be perfectly fine as well. NHibernate.Exceptions.GenericADOException Message: Error performing LoadByUniqueKey[SQL: SQL not available] Source: NHibernate StackTrace: c:\opt\nhibernate\2.1.2\source\src\NHibernate\Type\EntityType.cs(563,0): at NHibernate.Type.EntityType.LoadByUniqueKey(String entityName, String uniqueKeyPropertyName, Object key, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Type\EntityType.cs(428,0): at NHibernate.Type.EntityType.ResolveIdentifier(Object value, ISessionImplementor session, Object owner) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Type\EntityType.cs(300,0): at NHibernate.Type.EntityType.NullSafeGet(IDataReader rs, String[] names, ISessionImplementor session, Object owner) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Persister\Collection\AbstractCollectionPersister.cs(695,0): at NHibernate.Persister.Collection.AbstractCollectionPersister.ReadElement(IDataReader rs, Object owner, String[] aliases, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Collection\Generic\PersistentGenericSet.cs(54,0): at NHibernate.Collection.Generic.PersistentGenericSet`1.ReadFrom(IDataReader rs, ICollectionPersister role, ICollectionAliases descriptor, Object owner) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(706,0): at NHibernate.Loader.Loader.ReadCollectionElement(Object optionalOwner, Object optionalKey, ICollectionPersister persister, ICollectionAliases descriptor, IDataReader rs, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(385,0): at NHibernate.Loader.Loader.ReadCollectionElements(Object[] row, IDataReader resultSet, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(326,0): at NHibernate.Loader.Loader.GetRowFromResultSet(IDataReader resultSet, ISessionImplementor session, QueryParameters queryParameters, LockMode[] lockModeArray, EntityKey optionalObjectKey, IList hydratedObjects, EntityKey[] keys, Boolean returnProxies) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(453,0): at NHibernate.Loader.Loader.DoQuery(ISessionImplementor session, QueryParameters queryParameters, Boolean returnProxies) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(236,0): at NHibernate.Loader.Loader.DoQueryAndInitializeNonLazyCollections(ISessionImplementor session, QueryParameters queryParameters, Boolean returnProxies) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(1649,0): at NHibernate.Loader.Loader.DoList(ISessionImplementor session, QueryParameters queryParameters) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(1568,0): at NHibernate.Loader.Loader.ListIgnoreQueryCache(ISessionImplementor session, QueryParameters queryParameters) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Loader.cs(1562,0): at NHibernate.Loader.Loader.List(ISessionImplementor session, QueryParameters queryParameters, ISet`1 querySpaces, IType[] resultTypes) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Loader\Criteria\CriteriaLoader.cs(73,0): at NHibernate.Loader.Criteria.CriteriaLoader.List(ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\SessionImpl.cs(1936,0): at NHibernate.Impl.SessionImpl.List(CriteriaImpl criteria, IList results) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\CriteriaImpl.cs(246,0): at NHibernate.Impl.CriteriaImpl.List(IList results) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\CriteriaImpl.cs(237,0): at NHibernate.Impl.CriteriaImpl.List() c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\CriteriaImpl.cs(398,0): at NHibernate.Impl.CriteriaImpl.UniqueResult() c:\opt\nhibernate\2.1.2\source\src\NHibernate\Impl\CriteriaImpl.cs(263,0): at NHibernate.Impl.CriteriaImpl.UniqueResult[T]() D:\proj\CMS3\branches\nh_auth\DomainModel2Tests\Authorization\TempTests.cs(46,0): at CMS.DomainModel.Authorization.TempTests.Test1() Inner Exception System.Collections.Generic.KeyNotFoundException Message: The given key was not present in the dictionary. Source: mscorlib StackTrace: at System.ThrowHelper.ThrowKeyNotFoundException() at System.Collections.Generic.Dictionary`2.get_Item(TKey key) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Persister\Entity\AbstractEntityPersister.cs(2047,0): at NHibernate.Persister.Entity.AbstractEntityPersister.GetAppropriateUniqueKeyLoader(String propertyName, IDictionary`2 enabledFilters) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Persister\Entity\AbstractEntityPersister.cs(2037,0): at NHibernate.Persister.Entity.AbstractEntityPersister.LoadByUniqueKey(String propertyName, Object uniqueKey, ISessionImplementor session) c:\opt\nhibernate\2.1.2\source\src\NHibernate\Type\EntityType.cs(552,0): at NHibernate.Type.EntityType.LoadByUniqueKey(String entityName, String uniqueKeyPropertyName, Object key, ISessionImplementor session) I'm using NHibernate 2.1.2 and I've been debugging into the NHibernate source, but I'm coming up empty. Any suggestions? Thanks so much!

    Read the article

  • "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

    - by anjanesh
    I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

    Read the article

  • Resize underlying partitions in mdadm RAID1

    - by kyork
    I have a home built NAS, and I need to slightly reconfigure some of my drive usage. I have an mdadm RAID1 composed of two 3TB drives. Each drive has one ext3 partition that uses the entire drive. I need to shrink the ext3 partition on both drives, and add a second 8GB or so ext3 partition to one, and swap partition of equal size to the other. I think I have the steps figured out, but wanted some confirmation. Resize the mdadm RAID resize2fs /dev/md0 [size] where size is a little larger than the currently used space on the drive Remove one of the drives from the RAID mdadm /dev/md0 --fail /dev/sda1 Resize the removed drive with parted Add the new partition to the drive with parted Restore the drive to the RAID mdadm -a /dev/md0 /dev/sda1 Repeat 2-5 for the other device Resize the RAID to use the full partition mdadm --grow /dev/md0 -z max Is there anything I've missed, or haven't considered?

    Read the article

  • How can ShadowProtect SBS backup to alternating external drives?

    - by detly
    I am trying to configure ShadowProtect SBS (v. 4.1.5.10129) in Windows Server 2003 SBS to backup my server hard drives to two alternating external drives. What I want is to be able to swap one drive for another every Friday, and have ShadowProtect continue on the same schedule. Ideally, this would require absolutely no user interaction whatsoever, apart from physically unplugging one drive and reconnecting the other. The trouble is, Windows Server 2003 does not allow you to assign the same drive letter to two different devices. So if I plug in drive #1 and assign it drive letter "X:", the next week when I unplug it and plug in drive #2, it gets some other letter. But since ShadowProtect is set to backup to "X:\", it can't find it and the backup fails. The drives are Samsung STORY Station 3.0 2TB drives. How can I configure things so I can just swap the drives over every week and not worry about having to reconfigure drive letters every time?

    Read the article

  • "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

    - by anjanesh
    I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

    Read the article

  • Why can't add a hot spare in freebsd? Can anybody help me fix it?

    - by hamlet
    Why can't add a hot spare? Can anybody help me fix it? mfiutil add e1:s1 mfid0 mfiutil: Drive 1 is not available My mfi status:: mfiutil show config mfi0 Configuration: 1 arrays, 1 volumes, 0 spares array 0 of 2 drives: drive 0 ( 137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWHSB4C> SAS enclosure 1, slot 0 drive 1 ( 137G) ONLINE <HITACHI HUS153014VLS300 A410 serial=JFWJ3AEC> SAS enclosure 1, slot 1 volume mfid0 (136G) RAID-1 64K OPTIMAL spans: array 0 mfiutil show events 1468 (boot + 25s/BATTERY/WARN) - Battery removed 1475 (boot + 52s/DRIVE/WARN) - PD 00(e1/s0) is not a certified drive 1478 (boot + 52s/DRIVE/WARN) - PD 01(e1/s1) is not a certified drive 1480 (boot + 64s/BATTERY/WARN) - BBU disabled; changing WB virtual disks to WT mfiutil show volumes mfi0 Volumes: Id Size Level Stripe State Cache Name mfid0 ( 136G) RAID-1 64K OPTIMAL Disabled

    Read the article

  • How to safely use VSS when using a working directory on a thumb drive?

    - by MatthewMartin
    I know putting code into VSS in general is as safe as putting money into a mutual fund run by Bernard Madoff, but I don't have the luxury of ditching it for subversion. That said, I need to be able to write code on two machines, I'm considering checking out code to a flash thumb drive. Anyone know in advance what I should/shouldn't do to avoid loss of work? Do I need to ensure the drive letter stays the same?

    Read the article

  • Formatting a disk for Macintosh using Linux

    - by Ken Bloom
    I've been asked to move data from an old external hard drive to a new one, and to make the new one compatible with the Macintosh. (The old drive's USB connection has died, and I'm connecting to old the drive using a PC card that provieds an eSATA to the drive. The recipient's Macintosh doesn't have a PC card slot, so she can't access the old drive anymore. Hence, the new drive.) Naturally, I'm doing this data transfer using Linux. I've discovered that I can format the drive as HFS+ using mkfs.hfsplus from the hfsprogs package. But I need to know: do I need to do anything special with the partition table? Is there a special Macintosh partition table format that I need to format this disk to? If so, what tools can I use to get the right format for the partition table?

    Read the article

  • How to add new object to an IList mapped as a one-to-many with NHibernate?

    - by Jørn Schou-Rode
    My model contains a class Section which has an ordered list of Statics that are part of this section. Leaving all the other properties out, the implementation of the model looks like this: public class Section { public virtual int Id { get; private set; } public virtual IList<Static> Statics { get; private set; } } public class Static { public virtual int Id { get; private set; } } In the database, the relationship is implemented as a one-to-many, where the table Static has a foreign key pointing to Section and an integer column Position to store its index position in the list it is part of. The mapping is done in Fluent NHibernate like this: public SectionMap() { Id(x => x.Id); HasMany(x => x.Statics).Cascade.All().LazyLoad() .AsList(x => x.WithColumn("Position")); } public StaticMap() { Id(x => x.Id); References(x => x.Section); } Now I am able to load existing Statics, and I am also able to update the details of those. However, I cannot seem to find a way to add new Statics to a Section, and have this change persisted to the database. I have tried several combinations of: mySection.Statics.Add(myStatic) session.Update(mySection) session.Save(myStatic) but the closest I have gotten (using the first two statements), is to an SQL exception reading: "Cannot insert the value NULL into column 'Position'". Clearly an INSERT is attempted here, but NHibernate does not seem to automatically append the index position to the SQL statement. What am I doing wrong? Am I missing something in my mappings? Do I need to expose the Position column as a property and assign a value to it myself? EDIT: Apparently everything works as expected, if I remove the NOT NULL constraint on the Static.Position column in the database. I guess NHibernate makes the insert and immediatly after updates the row with a Position value. While this is an anwers to the question, I am not sure if it is the best one. I would prefer the Position column to be not nullable, so I still hope there is some way to make NHibernate provide a value for that column directly in the INSERT statement. Thus, the question is still open. Any other solutions?

    Read the article

  • Interop Structure: Should Unsigned Short be Mapped to byte[]?

    - by Ngu Soon Hui
    I have such a C++ structure: typedef struct _FILE_OP_BLOCK { unsigned short fid; // objective file ID unsigned short offset; // operating offset unsigned char len; // buffer length(update) // read length(read) unsigned char buff[MAX_BUFF_SIZE]; } FILE_OP_BLOCK; And now I want to map it in .Net. The tricky thing is that the I should pass a 2 byte array for fid, and integer for len, even though in C# fid is an unsigned short and len is an unsigned char I wonder whether my structure ( in C#) below is correct? public struct File_OP_Block { [MarshalAs(UnmanagedType.ByValArray, SizeConst = 2)] public byte[] fid; public ushort offset; public byte length; [MarshalAs(UnmanagedType.ByValArray, SizeConst = 240)] public char[] buff; }

    Read the article

  • Symlink across local volumes in webroot?

    - by geerlingguy
    I am looking for a good short-term solution to storage space concerns on my website. Currently, I have all uploaded files (flash video, images, etc.) inside the 'files' directory in my web root (/home/account/public_html/files). That directory is located on my high-speed main hard drive (a 15k SCSI drive). I have another drive with much more capacity, but spinning at 10k rpm (so still fast, but not as good for random reads/writes as the main drive. The entire drive is mounted at /backup Right now I'm just using it as a backup volume. I would like to create a symlink from my /home/account/public_html/files folder to /backup/files, and have all files reside on the second drive. However, if someone accesses a file at http://www.example.com/files/filename.jpg, would it still work if I symlinked to the second drive? (Basically, would Apache/PHP automatically know to follow the symlink for that directory?).

    Read the article

  • My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

    - by gopherman
    I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

    Read the article

  • My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

    - by gopherman
    I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

    Read the article

  • What are my options for a disk with what seems to be a corrupted filesystem?

    - by CT
    I have a friend with an old Dell that will not boot into Windows. It has an IDE drive. It spins up. I have an IDE to USB device. I've attached the drive via that device to a working laptop. The drive does not mount. If I go into Disk Management I can see the drive but it will not initalize, says "Drive not ready." I've also booted into a linux live cd to see if the drive mounts, it does not. I am just trying to recover some pictures from the drive. The data is not important enough to send to a professional. The issue is more of a curosity on how to recover data if and when these situations would occur in the future.

    Read the article

  • SQL SERVER – Disk Space Monitoring – Detecting Low Disk Space on Server

    - by Pinal Dave
    A very common question I often receive is how to detect if the disk space is running low on SQL Server. There are two different ways to do the same. I personally prefer method 2 as that is very easy to use and I can use it creatively along with database name. Method 1: EXEC MASTER..xp_fixeddrives GO Above query will return us two columns, drive name and MB free. If we want to use this data in our query, we will have to create a temporary table and insert the data from this stored procedure into the temporary table and use it. Method 2: SELECT DISTINCT dovs.logical_volume_name AS LogicalName, dovs.volume_mount_point AS Drive, CONVERT(INT,dovs.available_bytes/1048576.0) AS FreeSpaceInMB FROM sys.master_files mf CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.FILE_ID) dovs ORDER BY FreeSpaceInMB ASC GO The above query will give us three columns: drive logical name, drive letter and free space in MB. We can further modify above query to also include database name in the query as well. SELECT DISTINCT DB_NAME(dovs.database_id) DBName, dovs.logical_volume_name AS LogicalName, dovs.volume_mount_point AS Drive, CONVERT(INT,dovs.available_bytes/1048576.0) AS FreeSpaceInMB FROM sys.master_files mf CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.FILE_ID) dovs ORDER BY FreeSpaceInMB ASC GO This will give us additional data about which database is placed on which drive. If you see a database name multiple times, it is because your database has multiple files and they are on different drives. You can modify above query one more time to even include the details of actual file location. SELECT DISTINCT DB_NAME(dovs.database_id) DBName, mf.physical_name PhysicalFileLocation, dovs.logical_volume_name AS LogicalName, dovs.volume_mount_point AS Drive, CONVERT(INT,dovs.available_bytes/1048576.0) AS FreeSpaceInMB FROM sys.master_files mf CROSS APPLY sys.dm_os_volume_stats(mf.database_id, mf.FILE_ID) dovs ORDER BY FreeSpaceInMB ASC GO The above query will now additionally include the physical file location as well. As I mentioned earlier, I prefer method 2 as I can creatively use it as per the business need. Let me know which method are you using in your production server. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

< Previous Page | 141 142 143 144 145 146 147 148 149 150 151 152  | Next Page >