Search Results

Search found 5121 results on 205 pages for 'dotnetnuke connections'.

Page 146/205 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

  • Perfect is the enemy of “Good Enough”

    - by Daniel Moth
    This is one of the quotes that I was against, but now it is totally part of my core beliefs: "Perfect is the enemy of Good Enough" Folks used to share this quote a lot with me in my early career and my frequent interpretation was that they were incompetent people that were satisfied with mediocrity, i.e. I ignored them and their advice. (Yes, I went through an arrogance phase). I later "grew up" and "realized" that they were missing the point, so instead of ignoring them I would retort: "Of course we have to aim for perfection, because as human beings we'll never achieve perfection, so by aiming for perfection we will indeed achieve good enough results". (Yes, I went through a smart ass phase). Later I grew up a bit more and "understood" that what I was really being told is to finish my work earlier and move on to other things because by trying to perfect that one thing, another N things that I was responsible for were suffering by not getting my attention - all things on my plate need to move beyond the line, not just one of them to go way over the line. It is really a statement of increasing scale and scope. To put it in other words, getting PASS grades on 10 things is better than getting an A+ with distinction on 1-2 and a FAIL on the rest. Instead of saying “I am able to do very well these X items” it is best if you can say I can do well enough on these X * Y items”, where Y > 1. That is how breadth impact is achieved. In the future, I may grow up again and have a different interpretation, but for now - even though I secretly try to "perfect" things, I try not to do that at the expense of other responsibilities. This means that I haven't had anybody quote that saying to me in a while (or perhaps my quality of work has dropped so much that it doesn't apply to me any more - who knows :-)). Wikipedia attributes the quote to Voltaire and it also makes connections to the “Law of diminishing returns”, and to the “80-20 rule” or “Pareto principle”… it commonly takes 20% of the full time to complete 80% of a task while to complete the last 20% of a task takes 80% of the effort …check out the Wikipedia entry on “Perfect is the enemy of Good” and its links. Also use your favorite search engine to search and see what others are saying (Bing, Google) – it is worth internalizing this in a way that makes sense to you… Comments about this post by Daniel Moth welcome at the original blog.

    Read the article

  • fdisk shows overlapping partitions

    - by Campa
    At every boot to start Ubuntu, a partition gets re-mounted more than 1 times, sometimes causing very long boots. Example below: > dmesg ... [ 21.472020] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro ... [ 42.021537] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 ... I suspect there is a problem of overlapping partitions here, regarding sda4 and sda5: > sudo fdisk -l Device Boot Start End Blocks Id System /dev/sda1 63 610469 305203+ de Dell Utility /dev/sda2 612352 32069631 15728640 7 HPFS/NTFS/exFAT /dev/sda3 * 32069632 238979788 103455078+ 7 HPFS/NTFS/exFAT /dev/sda4 238983166 625141759 193079297 5 Extended /dev/sda5 238983168 612630527 186823680 83 Linux /dev/sda6 612632576 625141759 6254592 82 Linux swap / Solaris Further details: > more /etc/fstab ... # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=b33be99b-5c9e-449e-ad48-be608aeff001 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda7 during installation UUID=7c9071cc-b77b-40da-9f80-6b8a9a220cb1 none swap sw and > mount /dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/piero/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=piero) I am Running Ubuntu Oneiric + LXDE on Dell Studio XPS machine 64-bit, dual booting with Windows 7. A months ago, I resized the Ubuntu partition and maybe I messed up something by doing that. Do you have any idea, why this long booting is happening?

    Read the article

  • How to make my Oracle update/insert action through Java faster?

    - by gunbuster363
    I am facing a problem in my company that is - our program's speed is not fast enough. To be more specific, we are telecommunication company and this program handle call/internet serfing transaction made by every mobile phone users in our city. Because the amount of download content made by the iphone users is just too much, our program cannot handle them fast enough. The situation is, the amount of transaction made by users are double of the transaction processed by our program. Most of the running time of the program are dominated by DB transactions. I've search through the internet and browsed some sites ( for example: http://www.javaperformancetuning.com/tips/rawtips.shtml ) talking about Java performace in DB, but I cannot find a suggestion suitable for us. These advices are not applicable/already used, for instance: 1. Use prepared statements. Use parameterized SQL Already used prepared statement. Each time will use different parameter by clear parameters and set parameters. 2. Tune the SQL to minimize the data returned (e.g. not 'SELECT *'). Sure, already used. 3. Use connection pooling. We hold a single connection during the program's execution. And I doubt that pooling cannot solve the problem because our program act as 1 user, so there are no problem for concurrent access to DB. If anyone of you think pooling is good, please tell me why. Thanks. 4. Try to combine queries and batch updates. Cannot do it. Every query/insert/update is depend on the database's information. For example, we look up the DB for the client's information, if we cannot find his usage, we insert the usage into DB, otherwise we do update. 5. Close resources (Connections, Statements, ResultSets) when finished Sure. 6. Select the fastest JDBC driver. I don't know. I've search on the internet about the type of driver available and I am very confused. We use oracle.jdbc.driver.OracleDriver and we use thin instead of oci, that's all I know. In addition, our program is a two-tier way ( java <- oracle ) 7. Turn off auto-commit already done that. Looking forwards to any help.

    Read the article

  • Taking a Chomp out of a (Social Network) Product Hype

    - by kellsey.ruppel
    Andrew Kershaw, Senior Director Oracle Social Network Product Development, speaks about Oracle Social Network One of our competitors is being very aggressive with its own developed Social Network add-on, but there should be no doubt in the minds that the Oracle social capabilities available with Fusion CRM stack up well against it. Within the Oracle Cloud, we have announced a product called Oracle Social Network. That technology is pre-integrated into Fusion Applications, enabling your customer to build a collaborative and social enterprise (without all the noise!). Oracle Social Network is designed together with our Fusion Applications. It is very conveniently pre-integrated with CRM, HCM, Financials, Projects, Supply Chain, and the Fusion family. But what's even better is that the individual teams can take a considered approach to what they are trying to achieve within the collaboration process and the outcome they are trying to enable. Then they can utilize the network and collaboration tools to support that result. And there's more! The Fusion teams can design social interactions that bridge across and outside their individual product lines because we have more than just a product line and they know they have the social network to connect them. I know we have a superior product, but it is our ability to understand and execute across the enterprise that will enable us to deliver a much more robust and capable platform in the short term than our competitor can. We have built a product specifically designed for enterprise social collaboration which is not the same for the competition. We have delivered a much more effective solution - one in which individuals can easily collaborate to get results, while being confident that they know who has access to their information. Our platform has been pre-built to cross the company boundaries and enable our customers to collaborate, not just with their customers, but with their partners and suppliers as well. So Fusion addresses the combination of the enterprise application suite with enterprise collaboration and social networking. Oracle Social Network already has a feature function advantage over our competitor's tool providing a real added value to the employees. Plus Oracle has the ability to execute in a broad enterprise and cross-enterprise way that our competitors cannot. We have the power of a tool that provides the core social fabric across all of the applications, as well as supporting enterprise collaboration. That allows us to provide intelligent business insight, connections, and recommendations that our competitor simply can't. From our competitors, customers get integration for Sales; they get integration for Service, but then they have to integrate every other enterprise asset that they have by themselves. With Oracle, we are doing the integration. Fusion Applications will be pre-integrated, and over time, all of the applications in the business suite, including our Applications Unlimited and specialist industry applications, will connect to the Oracle Social Network. I'm confident these capabilities make Oracle Social Network the only collaboration platform on which to deliver the social enterprise.

    Read the article

  • Desparately Need Help: After a mishap, a folder shows 0 files in it

    - by bobby
    I'm hoping some of you guys may be able to shed some light on this scenario: I had a odt document on which I was working from one of many files in a folder among many on an internal hard-drive. Some kind of glitch occured and the document crashed (this could have been some kind of power charge whilst another hard drive was being unmounted). As I looked into the folders surrounding the folder in which my odt document was stored, they start to show 0 files in them. I immediately switched off the PC and then re-started. Upon the re-start, the folders would show the 1,000s of files I've stored in them and then within 5 minutes, as I started to back them up, freeze, cut-off the process of transfer. When I tried to open anything on the internal hard-drive, be it an avi film, an mp3, a cbr or a word doc, they all showed blank or would work. Some folders had vastly less files showing. Eventually, things calmed down. I closed the PC, checked that the connections were in firmly, gave it a vacuum and restarted the PC. All the files eventually showed up and I started to back them up (which I'd brought a hard drive for anyway but been distracted and not done). All folders show except the one which contained the document I was working on at the time of the trouble. Strangely, it was one that should itself full on several occasions on restarts. It shows zero files now. Properties shows zero files and zero space taken by it. Yet when I drop a file into this folder by pasting it in, it disappears too. Opening the folder, there is nothing there. But if I paste that document again, the PC asks would I like to replace the existing file with the same name (that I can't see), when I click yes, the file appears. When I exit, the folder shows the 0 files in the folder. Going back into the folder, it has disappeared again. I'm hoping that someone can help give me tips to recover the files in the folder, it would be greatly, greatly appreciated. All other films, music, comics, documents show and are fine!

    Read the article

  • JavaOne 2013: (Key) Notes of a conference – State of the Java platform and all the roadmaps by Amis

    - by JuergenKress
    Last week’s JavaOne conference provided insights in the roadmap of the Java platform as well as in the current state of things in the Java community. The close relationship between Oracle and IBM concerning Java, the (continuing) lack of such a relationship with Google, the support from Microsoft for Java applications on its Azure cloud and the vibrant developer community – with over 200 different Java User Groups in many countries of the world. There were no major surprises or stunning announcements. Java EE 7 (release in June) was celebrated, the progress of Java 8 SE explained as well as the progress on Java Embedded and ME. The availability of NetBeans 7.4 RC1 and JDK 8 Early Adopters release as well as the open sourcing of project Avatar probably were the only real news stories. The convergence of JavaFX and Java SE is almost complete; the upcoming alignment of Java SE Embedded and Java ME is the next big consolidation step that will lead to a unified platform where developers can use the same skills, development tools and APIs on EE, SE, SE Embedded and ME development. This means that anything that runs on ME will run on SE (Embedded) and EE – not necessarily the reverse because not all SE APIs are part of the compact profile or the ME environment. However, the trimming down of the SE libraries and the increased capabilities of devices mean that a pretty rich JVM runs on many devices – such as JavaFX 8 on the Raspberry PI. The major theme of the conference was Internet of Things. A world of things that are smart and connected, devices like sensors, cameras and equipment from cars, fridges and television sets to printers, security gates and kiosks that all run Java and are all capable of sending data over local network connections or directly over the internet. The number of devices that has these capabilities is rapidly growing. This means that the number of places where Java programs can help program the behavior of devices is growing too. It also means that the volume of data generated is expanding and that we have to find ways to harvest that data, possibly do a local pre-processing (filter, aggregate) and channel the data to back end systems. Terms typically used are edge devices (small, simple, publishing data), gateways (receiving data from many devices, collecting and consolidating, pre-processing, sending onwards to back end – typically using real time event processing) and enterprise services – receiving the data-turned-information from the gateways to further consolidate, distribute and act upon. A cheap device like the Raspberry PI is a perfect way to get started as a Java developer with what embedded (device) programming means and how interaction with physical input and output takes place. Roadmaps The over all progress on Java is visualized in this overview: Read the full article here. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Amis,OOW,Oracle OpenWorld,JavaOne,WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

    Read the article

  • Upgrading Oracle Enterprise Manager: 12c to 12c Release 2

    - by jorge_neidisch
    1 - Download the OEM 12c R2. It can be downloaded here: http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html  Note: it is a set of three huge zips. 2 - Unzip the archives 3 - Create a directory (as the oem-owner user) where the upgraded Middleware should be installed. For instance: $ mkdir /u01/app/oracle/Middleware12cR2 4 - Back up OMS (Middleware home and inventory), Management Repository and Software Library. http://docs.oracle.com/cd/E24628_01/doc.121/e24473/ha_backup_recover.htm#EMADM10740 5 - Ensure that the Management tables don't have snapshots:  SQL> select master , log_table from all_mview_logs where log_owner='<EM_REPOS_USER>If there are snapshots drop them:  SQL> Drop snapshot log on <master> 6 - Copy emkey  from existing OMS:  $ <OMS_HOME>/bin/emctl config emkey -copy_to_repos [-sysman_pwd <sysman_pwd>]To verify whether the emkey is copied, run the following command: $ <OMS_HOME>/bin/emctl status emkeyIf the emkey is copied, then you will see the following message:The EMKey  is configured properly, but is not secure.Secure the EMKey by running "emctl config emkey -remove_from_repos". 7 - Stop the OMS and the Agent $ <OMS_HOME>/bin/emctl stop oms $ <AGENT_HOME>/bin/emctl stop agent 8 - from the unzipped directory, run $ ./runInstaller 8a - Follow the wizard: Email / MOS; Software Updates: disable or leave empty. 8b - Follow the wizard:  Installation type: Upgrade -> One System Upgrade. 8c - Installation Details: Middleware home location: enter the directory created in step 3. 8d - Enter the DB Connections Details. Credentials for SYS and SYSMAN. 8e - Dialog comes: Stop the Job Gathering: click 'Yes'. 8f- Warning comes: click 'OK'. 8g - Select the plugins to deploy along with the upgrade process 8h- Extend Weblogic: enter the password (recommended, the same password for the SYSMAN user). A new directory will be created, recommended: /u01/app/oracle/Middleware12cR2/gc_inst 8i - Let the upgrade proceed by clicking 'Install'. 8j - Run the following script (as root) and finish the 'installation':  $ /u01/app/oracle/Middleware12R2/oms/allroot.sh 9 - Turn on the Agent:  $ <AGENT_HOME>/bin/emctl start agent  Note that the $AGENT_HOME might be located in the old Middleware directory:  $ /u01/app/oracle/Middleware/agent/agent_inst/bin/emctl start agent 10 - go to the EM UI. Select the WebLogic Target and choose the option "Refresh WebLogic Domain" from the menu. 11 - Update the Agents: Setup -> Manage Cloud Control -> Upgrade Agents -> Add (+) Note that the agents may take long to show up. ... and that's it! Or that should be it !

    Read the article

  • MySQL Workbench 6.2.1 BETA has been released

    - by user12602715
    The MySQL Workbench team is announcing availability of the first beta release of its upcoming major product update, MySQL  Workbench 6.2. MySQL Workbench 6.2 focuses on support for innovations released in MySQL 5.6 and MySQL 5.7 DMR (Development Release) as well as MySQL Fabric 1.5, with features such as: A new spatial data viewer, allowing graphical views of result sets containing GEOMETRY data and taking advantage of the new GIS capabilities in MySQL 5.7. Support for new MySQL 5.7.4 SQL syntax and configuration options. Metadata Locks View shows the locks connections are blocked or waiting on. MySQL Fabric cluster connectivity - Browsing, view status, and connect to any MySQL instance in a Fabric Cluster. MS Access migration Wizard - easily move to MySQL Databases. Other significant usability improvements were made, aiming to raise productivity for advanced and new users: Direct shortcut buttons to commonly used features in the schema tree. Improved results handling. Columns have better auto-sizing and their widths are saved. Fonts can also be customized. Results "pinned" to persist viewing data. A convenient Run SQL Script command to directly execute SQL scripts, without loading them first. Database Modeling has been updated to allow changes to the formatting of note objects and attached SQL scripts can now be included in forward engineering and synchronization scripts. Integrated Visual Explain within the result set panel. Visual Explain drill down for large to very large explain plans. Shared SQL snippets in the SQL Editor, allowing multiple users to share SQL code by storing it within a MySQL instance. And much more. The list of provided binaries was updated and MySQL Workbench binaries now available for: Windows 7 or newer Mac OS X Lion or newer Ubuntu 12.04 LTS and Ubuntu 14.04 Fedora 20 Oracle Linux 6.5 Oracle Linux 7 Sources for building in other Linux distributions For the full list of changes in this revision, visit http://dev.mysql.com/doc/relnotes/workbench/en/changes-6-2.html For discussion, join the MySQL Workbench Forums: http://forums.mysql.com/index.php?151 Download MySQL Workbench 6.2.1 now, for Windows, Mac OS X 10.7+, Oracle Linux 6 and 7, Fedora 20, Ubuntu 12.04 and Ubuntu 14.04 or sources, from: http://dev.mysql.com/downloads/tools/workbench/ On behalf of the MySQL Workbench and the MySQL/ORACLE RE Team.

    Read the article

  • The Connected Company: WebCenter Portal Activity Streams

    - by Michael Snow
    Guest post by Mitchell Palski, Oracle Staff Sales Consultant Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Social media is sure to have made its way into your company or government organization. Whether its discussion threads, blog posts, Facebook-style profile-pages, or just a simple Instant Messenger application; in one way or another, your employees are connected. What are the objectives of leveraging social media in your organization? Facilitating knowledge transfer More effectively organizing team events Generating inter-community discussions to solve problems Improving resource management Increasing organizational awareness Creating an environment of accountability Do any of the business objectives above stand out to you as needs? If so, consider leveraging the WebCenter Portal Activity Stream as part of your solution. In WebCenter Portal, the Activity Stream feature provides a streaming view of the activities of your connections, actions taken in portals, and business activities that looks a lot like a combined Facebook and Twitter newsfeed. Activity Stream can note when a user: Posts feedback (comments) Uploads a document Creates a new blog, page, event, or announcement Starts a new discussion Streams messages and attachments entered through WebCenter Publisher (similar to Twitter) Through Activity Stream Preferences, you can select which of these activities to show or hide from your personal Activity Stream. Here’s what you get: Real-time stream of activities with in a Portal or sub-Portal increases awareness across your organization or within a working group Complete list of user actions reduces the time-to-find for users that need to interact with the latest activities in your portal Users can publish to their groups when tasks are finished for complete group traceability and accountability, as well as improved resource management. Project discussions and shared documents that require the expertise of someone outside of a working group now get increased visibility across your organization. There’s a reason that commercial Social Media tools like Facebook and Twitter have been so successful – they spread information in an aesthetically appealing and easy to read format.  Strategically placing an Activity Feed within your Portal is analogous to sending your employees a daily newsletter, events calendar, recent documents report, and list of announcements – BUT ALL IN ONE! 

    Read the article

  • Developer career feeling like going back in time every new job [closed]

    - by komediant
    Is there a good category for this question? My background is bachelor in ICT and for a hobby I am programming already since I was around twelve I think. Started with QBasic, Pascal, C, Java et cetera. Currently I am working for about eight/nine years. Half academics/medical and half company world. A few years ago I started with frameworks and I began with Grails (underlying Spring/Hibernate), which was a heavenly job, very productive and no hassle. My previous job I developed in pure Spring/Hibernate Java, which was a bit more writing annotations and XML and no conventions like Grails. But still, I did like Spring/Hibernate a lot and the professional setup with a developmentstreet, versioning, Jenkins/Sonar, log4j and a good IDE like IntellIJ. It felt quite 'clear' and organised, although I knew Grails which felt a bit more productive. But...at my current job almost half the code is pure servlet, hard coded JDBC (connections handled by yourself), scriptlets in all JSP pages, no service layer, no versioning, no Maven, HTML in DAO-layer, JAR-hell, no hot swap deployment locally, every change you have to deploy and hope it works fine on the server. All local development needs ugly scriptlet tags to check which environment it is running. Et cetera. Now and then developers work over in the evening - I don't - and still lots of issues are not solved and new projects are waiting. I hear the developers complaining, but somehow they feel like what they have now is "advanced" or they are in a sort of comfore zone. The lead developer seems open for new things, but half of the times he says he can implement MVC-framework features himself instead of using what is already out there. So in short, I currently feel like I miss all the modern framework techniques and that the company is going so slow forward. I just work here for two months now. What I do now is also code some partially ugly stuff, but it goes in completely into my nature and I feel uncomfortable with it. Coding something takes long(er) than estimated and my manager complains about why it takes so long and I feel ashamed for myself needing so much time. Where I was used to just writing a query I now build up whole try catch methods. My manager knows my complaints and the developers do so too. There will come a meeting to line out plans for 2013 on technology and the issues I and the company are facing. I am not looking for another job yet, it's close to wehre I live and the economy is fragile. Does anyone else have had this kind of career, like feeling going backwards witch technology? And how did you cope with it?

    Read the article

  • Weird Ubuntu Desktop Boot Partition On External Hard Drive

    - by Magnitus
    I have a Thinkpad with Windows 7. Last time I installed an Ubuntu/Windows dual boot, Windows was never same after and regularly got corrupted so this time, I installed Ubuntu on a separate external hard drive. I took a 500 GB external hard drive and used Windows to shrink the partition on it to 400 GB, freeing 100 GB to install Ubuntu. Then I modified the booting priority of my computer to boot from the external hard drive if present. Then, I installed Ubuntu desktop on the external hard drive using a DVD, picked the most simplistic partitioning scheme I could get away with (didn't go auto as it didn't include the external hard drive as a choice) and voilà. Fast forward some time and I'm trying to refresh my understanding of Linux partitions to install a bunch of servers, so I'm looking at the current partitioning scheme on my external hard drive and find the boot partition puzzling... sda is my integrated hard drive with Windows 7. sdb is my Ubuntu desktop external hard drive. Running parted on sdb, I get this: (parted) print Model: WD My Passport 0740 (scsi) Disk /dev/sdb: 500GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 393GB 393GB primary ntfs boot 2 393GB 500GB 107GB extended 5 393GB 425GB 32.8GB logical linux-swap(v1) 6 425GB 500GB 74.6GB logical ext4 At this point, I'm wondering why the ntfs partition is flagged as "boot" and not my ext4 partition which is the partition that contains / (and by extension, /boot since it's not on its own separate partition). Looking at mtab only confirms what I already know: eric@eric-ThinkPad-W530:~$ sudo cat /etc/mtab /dev/sdb6 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/cgroup tmpfs rw 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 none /run/user tmpfs rw,noexec,nosuid,nodev,size=104857600,mode=0755 0 0 none /sys/fs/pstore pstore rw 0 0 systemd /sys/fs/cgroup/systemd cgroup rw,noexec,nosuid,nodev,none,name=systemd 0 0 gvfsd-fuse /run/user/1000/gvfs fuse.gvfsd-fuse rw,nosuid,nodev,user=eric 0 0 /dev/sdb1 /media/eric/My\040Passport fuseblk rw,nosuid,nodev,allow_other,default_permissions,blksize=4096 0 0 My lack of understanding concerning this is not vital to anything (this is only my development desktop partition), but somehow annoys me. Any insight that could shed some light on this would be welcome.

    Read the article

  • How do I prevent ISPs from killing downloads of files in mid-transfer?

    - by Gorchestopher H
    I run a small website with a few users, low traffic, mostly to share personal mp3 files with a small community. Depending on their ISP, my users can't always download or stream larger files. By larger I mean larger than 1MB. Essentially the host either stops sending, or the client stops receiving. One of the links along the connection chain simply ends its connection before the transfer completes Trace-route shows no connection issues. There are no connection issues with short transfers that don't take more than a few seconds. It's these 10 second transfers that just end up ending. Just doing a straight download with a direct link can yield this error if you have the wrong ISP. Strangely enough, this is most common with users with ISPs who are essentially independent providers that buy service via a fiber link. Unfortunately these providers aren't very knowledgeable, are unable to do any testing, and insist it's a problem with the host. I have gotten my host to transfer my site to different servers of their, to the same effect. Nearly identical sites (affiliate sites actually) experience no such issue. What can I be doing to further troubleshoot this matter? How can I prove that someone is dropping the ball, and identify who that party is? Can I do a 5Mb traceroute? EDIT Maybe I can clear up some misconceptions with my question: The files are not very large. They are simply over 2Mb. The users do not have "slow" connections, they are at least 5mbps. This "time out" happens very quickly, in the realm of 5 seconds, so I don't know if it's a timeout or not. The user often gets 1 or 2Mb in this chunk of time. I have tried streaming with a flash player. I have tried saving the target. Forcing the download. I have tried allowing the browser to stream the file. I have tried different browsers (FF, IE, Chrome). Users are able to download identical files when on different hosts.

    Read the article

  • Why is the MaskBit maxed out

    - by CStreel
    Hi there for some reason the maskbit of my b2FixtureDef is being maxxed out and im not sure why Here is the declaration of the items that are used in the game enum PhysicBits { PB_NONE = 0x0000, PB_PLAYER = 0x0001, PB_PLATFORM = 0x0002 }; Basically what i want is the player to run along a surface is not slow down (i set platform & player friction to 0.0f) I then setup my Contact Listener to print out the connections (currently only have 1 platform and 1 player) Player Fixture Def b2FixtureDef fixtureDef; fixtureDef.shape = &groundBox; fixtureDef.density = 1.0f; fixtureDef.friction = 0.0f; fixtureDef.filter.categoryBits = PB_PLAYER; fixtureDef.filter.maskBits = PB_PLATFORM; Platform Fixture Def b2FixtureDef fixtureDef; fixtureDef.shape = &groundBox; fixtureDef.density = 1.0f; fixtureDef.friction = 0.0f; fixtureDef.filter.categoryBits = PB_PLATFORM; fixtureDef.filter.maskBits = PB_PLAYER; Now correct me if im wrong but these are saying the following: Player Collides with Platform Platform Collides with Player Here is the printout of the fixtures colliding with each other ******** <-- Indicates new Contact Platform ContactA: 2 MaskA: 1 ------ Player ContactB: 1 MaskB: 2 ******** <-- Indicates new Contact Platform ContactA: 2 MaskA: 1 ------ Player ContactB: 1 MaskB: 65535 ******** <-- Indicates new Contact Platform ContactA: 1 MaskA: 65535 ------ Player ContactB: 1 MaskB: 65535 Here is where i am confused. On the second & third contact the player maskBit is set to 65535 when it should be 2 and there are 3 contacts when i am sure at most there should only be 2. I've been trying to figure this out for hours and i can't understand why it is doing this. I would be very grateful is someone could shine some light on this for me UPDATE: **I printed out the class of the contacting objects. For some reason it seems to do the following: First Contact: Correct Result. Second Contact: Player b2Fixture Obtains a new maskBit. Third Contact: Platform b2Fixture appears to be set to the same as the Player b2Fixture. It would seem I have a memory race condition i think**

    Read the article

  • Is there a factory pattern to prevent multiple instances for same object (instance that is Equal) good design?

    - by dsollen
    I have a number of objects storing state. There are essentially two types of fields. The ones that uniquely define what the object is (what node, what edge etc), and the others that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methods, so all these objects act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approach which accepts a Builder object and constructs the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquely defines the type of object (this is node A to node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows its state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overriding of serialization methods to make it work (ensure that when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in its place), as well as using a weakHashMap as if it was a weakHashSet to know whether an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to its own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state that is different than my memory; to tell my memory when its own state is inconsistent. I believe this is possible despite their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect that I'm posting).

    Read the article

  • is a factory pattern to prevent multuple instances for same object (instance that is Equal) good design?

    - by dsollen
    I have a number of objects storing state. There are essentially two types of fields. The ones that uniquly define what the object is (what node, what edge etc), and the oens that store state describing how these things are connected (this node is connected to these edges, this edge is part of these paths) etc. My model is updating the state variables using package methdos, so these objects all act as immutable to anyone not in Model scope. All Objects extend one base type. I've toyed with the idea of a Factory approch which accepts a Builder object and construct the applicable object. However, if an instance of the object already exists (ie would return true if I created the object defined by the builder and passed it to the equal method for the existing instance) the factory returns the current object instead of creating a new instance. Because the Equal method would only compare what uniquly defines the type of object (this is node A nto node B) but won't check the dynamic state stuff (node A is currently connected to nodes C and E) this would be a way of ensuring anyone that wants my Node A automatically knows it's state connections. More importantly it would prevent aliasing nightmares of someone trying to pass an instance of node A with different state then the node A in my model has. I've never heard of this pattern before, and it's a bit odd. I would have to do some overiding of serlization methods to make it work (ensure when I read in a serilized object I add it to my facotry list of known instances, and/or return an existing factory in it's place), as well as using a weakHashMap as if it was a weakHashSet to know rather an instance exists without worrying about a quasi-memory leak occuring. I don't know if this is too confusing or prone to it's own obscure bugs. One thing I know is that plugins interface with lowest level hardware. The plugins have to be able to return state taht is different then my memory; to tell my memory when it's own state is inconsistent. I believe this is possible despit their fetching objects that exist in my memory; we allow building of objects without checking their consistency with the model until the addToModel is called anyways; and the existing plugins design was written before all this extra state existed and worked fine without ever being aware of it. Should I just be using some other design to avoid this crazyness? (I have another question to that affect I'm posting).

    Read the article

  • Looking for an algorithm to connect dots - shortest route

    - by e4ch
    I have written a program to solve a special puzzle, but now I'm kind of stuck at the following problem: I have about 3200 points/nodes/dots. Each of these points is connected to a few other points (usually 2-5, theoretical limit is 1-26). I have exactly one starting point and about 30 exit points (probably all of the exit points are connected to each other). Many of these 3200 points are probably not connected to neither start nor end point in any way, like a separate net, but all points are connected to at least one other point. I need to find the shortest number of hops to go from entry to exit. There is no distance between the points (unlike the road or train routing problem), just the number of hops counts. I need to find all solutions with the shortest number of hops, and not just one solution, but all. And potentially also solutions with one more hop etc. I expect to have a solution with about 30-50 hops to go from start to exit. I already tried: 1) randomly trying possibilities and just starting over when the count was bigger than a previous solution. I got first solution with 3500 hops, then it got down to about 97 after some minutes, but looking at the solutions I saw problems like unnecessary loops and stuff, so I tried to optimize a bit (like not going back where it came from etc.). More optimizations are possible, but this random thing doesn't find all best solutions or takes too long. 2) Recursively run through all ways from start (chess-problem-like) and breaking the try when it reached a previous point. This was looping at about a length of 120 nodes, so it tries chains that are (probably) by far too long. If we calculate 4 possibilities and 120 nodes, we're reaching 1.7E72 possibilities, which is not possible to calculate through. This is called Depth-first search (DFS) as I found out in the meantime. Maybe I should try Breadth-first search by adding some queue? The connections between the points are actually moves you can make in the game and the points are how the game looks like after you made the move. What would be the algorithm to use for this problem? I'm using C#.NET, but the language shouldn't matter.

    Read the article

  • What does this SAP error mean? recv104 NiIReadrecv nixxi.cp5087

    - by Techboy
    I have an SAP BI Portal system and an SAP BW system. In the Visual Administrator of the BI Portal, section 'JCo RFC Provider' I have created some RFC listeners. In the SAP BW system (in transaction SM59), I have created, tested and activated the relevant RFC connections. When I start a JCo RFC Provider in the BI Portal the BW system that it communicates with produces these errors (displayed from SAP transaction SM21): Operating system call recv failed (error no. 104 ) Module nam Line Error text Caller.... Reason/cal nixxi.cp 5087 recv104 NiIRead recv Documentation for system log message Q0 I : The specified operating system call was returned with an error. For communication calls (receive, send, etc) often the cause of errors are network problems. It could also be a configuration problem at operating system level. (file cannot be opened, no space in the file system etc.). Additional specifications for error number 104 Name for errno number E_UNKNOWN_NO The meaning of the value stored in 'errno' is platform-dependent. The value which occurred here is unknown to the SysLog system. Either there is an incorrect error number in the SysLog message, or the tables TSLE2 or TSLE3 are not completely maintained. Technical details File Offset RecFm System log type Grp N variable message data 6 410220 m Error (Function,Module,Row) Q0 I recv104 NiIReadrecv nixxi.cp5087 There is plenty of space left in the file system, the servers can ping each other and there is no firewall between the servers. The tables (TSLE2 or TSLE3) mentioned in the error message do not provide any additional information. Please can you tell me if this error message refers to something specific, or if it is generic: recv104 NiIReadrecv nixxi.cp5087

    Read the article

  • FTP through HAProxy

    - by Menda
    I have a machine, which is the Host and has HAProxy installed in it and working. Then I have a Guest KVM virtual machine running inside the Host with an IP 192.168.122.152. I installed an FTP server in the Guest machine with VSFTPD. From the Host, if I try the command $ ftp -p 192.168.122.152, works perfectly and I can connect to the Guest FTP. I need to remark that this FTP is configured as passive, but both passive and active connections are working from the Host. This is an extract of part of /etc/vsftpd.conf in the Guest: # Passive mode connect_from_port_20=NO tcp_wrappers=YES listen_address=192.168.122.152 pasv_enable=YES pasv_promiscuous=NO port_enable=YES port_promiscuous=NO pasv_max_port=10000 pasv_min_port=10250 Now it's time to make it accessible from outside, so I configure /etc/haproxy/haproxy.cfg like this: listen FTP_Default *:21 server ftp01 192.168.122.152 check port 21 inter 10s rise 1 fall 2 listen FTP_Range *:10000-10250 server ftp01 192.168.122.152 check port 21 inter 10s rise 1 fall 2 But if I try to connect from other machine in internet $ ftp -p $PUBLICIP, it only responds: Connected to <PUBLICIP>, but it doesn't ask for the login and password. Something in the HAProxy config must be wrong, because it's the only point where it fails. By the way, I tried to adapt my configuration to this one in this blog. Thanks.

    Read the article

  • Postgres - could not create any TCP/IP sockets

    - by Jacka
    I'm running a rails app in development with postgresql 9.3. When I tried to start passenger server today, I got: PG::ConnectionBad - could not connect to server: Connection refused Is the server running on host "localhost" (217.74.65.145) and accepting TCP/IP connections on port 5432? No big deal I thought, that happened before. Restarting postgres always solved the problem. So I ran sudo service postgresql restart and got: * Restarting PostgreSQL 9.3 database server * The PostgreSQL server failed to start. Please check the log output: 2014-06-11 10:32:41 CEST LOG: could not bind IPv4 socket: Cannot assign requested address 2014-06-11 10:32:41 CEST HINT: Is another postmaster already running on port 5432? If not, wait a few seconds and retry. 2014-06-11 10:32:41 CEST WARNING: could not create listen socket for "localhost" 2014-06-11 10:32:41 CEST FATAL: could not create any TCP/IP sockets ...fail! My postgresql.conf points to the defaults: localhost and port 5432. I tried changing the port but the error message is the same (except the port change). Both ps aux | grep postgresql and ps aux | grep postmaster return nothing. EDIT: In postgresql.conf I changed listen_addresses to 127.0.0.1 instead of localhost and it did the trick, server restarted. I also had to edit my applications' db config and point to 127.0.0.1 instead of localhost. However, the question is now, why is localhost considered to be 217.74.65.145 and not 127.0.0.1? That's my /etc/hosts: 127.0.0.1 local 127.0.1.1 jacek-X501A1 127.0.0.1 something.name.non.example.com 127.0.0.1 company.something.name.non.example.com

    Read the article

  • Mapping Drive Error - System Error 1808

    - by Julian Easterling
    A vendor is attempting to map and preserve a network drive using nt authority/system; so it stays persistent when the interactive session of the server is lost. They were able to do this on one server (Windows 2008 R2) but not a second computer (also Windows 2008 R2). D:\PsExec.exe -s cmd.exe PsExec v1.98 - Execute processes remotely Copyright (C) 2001-2010 Mark Russinovich Sysinternals - www.sysinternals.com Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. all rights reserved. C:\Windows\system32>whoami nt authority\system C:\Windows\system32>net use New connections will be remembered. Status Local Remote Network -------------------------------------------------------------------- OK X: \\netapp1\share1 Microsoft Windows Network The command completed successfully. C:\Windows\system32>net use q: \\netapp1\share1 System error 1808 has occurred. The account used is a computer account. Use your global user account or local user account to access this server. C:\Windows\system32> I am unsure on how to set up a "machine account mapping" which will preserve the drive letter of the Netapp path being mapped, so that the service account running a Windows service can continue to access the share after interactive logon has expired on the server. Since they were able to do this on one server but not another, I'm not sure how to troubleshoot the problem? Any suggestions?

    Read the article

  • Squid on an Azure VM

    - by LantisGaius
    I can't get it to work. Here's exactly what I did: Create a new Azure VM, Windows Server 2012. RDP to the new VM Download & Extract Squid for Windows (2.7.STABLE8) Rename the conf files (squid, mime & cachemgr) Add the following lines on the end of squid.conf auth_param basic program c:/squid/libexec/ncsa_auth.exe c:/squid/etc/passwd.txt auth_param basic children 5 auth_param basic realm Welcome to http://abcde.fg Squid Proxy! auth_param basic credentialsttl 12 hours auth_param basic casesensitive off acl ncsa_users proxy_auth REQUIRED http_access allow ncsa_users Use http://www.htaccesstools.com/htpasswd-generator-windows/ to create passwd.txt Test passwd.txt via c:/squid/libexec/ncsa_auth.exe c:/squid/etc/passwd.txt (success) squid -z squid -i net start squid (No errors so far). go to https://manage.windowsazure.com, Virtual Machines - myVM - Endpoints Add Endpoint: Name: Squid Protocol: TCP Public Port: 80 Private Port: 3128 That's it. Unfortunately, it doesn't work. I think I screwed something up at the endpoint? I'm not sure.. help? EDIT: I'm testing it via Firefox - Options - Advanced - Network, and the exact error is "The Proxy Server is refusing connections." I'm using my DNS as the Proxy server "abcdef.cloudapp.net" and port 80 (since that's my public endpoint).

    Read the article

  • Linked server problem on SQL Server 2005

    - by BradyKelly
    I have a weird issue and I hope someone can steer me in the right direction for resolving this please. When I execute the following query against a linked server, I get the following error. I can connect to the server in SSMS as a separate server, and execute a similar query against its Deposits table. The nn.nn is my own replacement to avoid broadcasting our server addresses. The query: select td.Batch , td.DateTimeDeposited from Deposits cd left join [172.nn.nn.32\sqlexpress].Terminal.dbo.Deposits td on cd.DateTimeDeposited = td.DateTimeDeposited The error: OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "Login timeout expired". OLE DB provider "SQLNCLI" for linked server "172.nn.nn.11\sqlexpress" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". Msg 65535, Level 16, State 1, Line 0 SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF]. Notice how the error is about server 172.nn.nn.11 and not 172.nn.nn.32. SOLVED (STUPID ME): Somebody had added an extra bit to my query that was scrolled off-screen and was querying the 17.nn.nn.11 server.

    Read the article

  • UNC Path fails by IP "no network provider accepted the given network path", but works using hostname

    - by BoyMars
    I have an unusual problem with a Windows Server 2003 (Standard x86) box. It appears the machine will not accept connections to its shares (locally and from other domain member servers) by using its ip address in a UNC path. The error returned is: "no network provider accepted the given network path" This is the case with the machine's ip address: \\10.0.8.x and even the loopback address: \\127.0.0.1 \\localhost does not work... but using the hostname (fqdn or not) works: \\server & \\server.domain.local The local windows firewall for this server is off, ping/rdp/other services respond fine using the IP address. The following services are running and have been restarted: Computer Browser Workstation Server The server itself has been rebooted too. Event 8032 in the system log indicates that: The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{29A6A925-AFB3-47E2-BA59-DDA086DEAE7A}. The backup browser is stopping. The domain controller has not been restarted, no other servers have experienced this problem, yet there are a number of browser (8021) related errors in the logs on this server. Does anyone have any suggestions? I would like to avoid rejoining this server to the domain if possible.

    Read the article

  • Connecting to ItsHidden in Ubuntu 9.10 problems

    - by Ionel Bratianu
    I try to setup a VPN connection to ItsHidden on Ubuntu 9.10. I double-checked my credentials in the VPN configuration, but I don't think that this is problem. In my syslog I got these messages: Jan 11 14:38:46 NetworkManager: Starting VPN service 'org.freedesktop.NetworkManager.pptp'... Jan 11 14:38:46 NetworkManager: VPN service 'org.freedesktop.NetworkManager.pptp' started (org.freedesktop.NetworkManager.pptp), PID 4502 Jan 11 14:38:46 NetworkManager: VPN service 'org.freedesktop.NetworkManager.pptp' just appeared, activating connections Jan 11 14:38:46 NetworkManager: VPN plugin state changed: 1 Jan 11 14:38:46 NetworkManager: VPN plugin state changed: 3 Jan 11 14:38:46 pppd[4506]: Plugin /usr/lib/pppd/2.4.5//nm-pptp-pppd-plugin.so loaded. Jan 11 14:38:46 NetworkManager: VPN connection 'ItsHidden' (Connect) reply received. Jan 11 14:38:46 pppd[4506]: pppd 2.4.5 started by root, uid 0 Jan 11 14:38:46 pppd[4506]: Using interface ppp0 Jan 11 14:38:46 NetworkManager: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Jan 11 14:38:46 NetworkManager: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Jan 11 14:38:46 pppd[4506]: Connect: ppp0 /dev/pts/1 Jan 11 14:39:06 pptp[4508]: nm-pptp-service-4502 fatal[get_ip_address:pptp.c:430]: gethostbyname 'vpn.itshidden.com': HOST NOT FOUND Jan 11 14:39:06 pppd[4506]: Modem hangup Jan 11 14:39:06 pppd[4506]: Connection terminated. Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Jan 11 14:39:06 pppd[4506]: Exit. Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: VPN plugin failed: 1 Jan 11 14:39:06 NetworkManager: VPN plugin state changed: 6 Jan 11 14:39:06 NetworkManager: VPN plugin state change reason: 0 Jan 11 14:39:06 NetworkManager: connection_state_changed(): Could not process the request because no VPN connection was active. Jan 11 14:39:06 NetworkManager: Policy set 'Auto eth0' (eth0) as default for routing and DNS. Jan 11 14:39:19 NetworkManager: [1263213559.003098] ensure_killed(): waiting for vpn service pid 4502 to exit Jan 11 14:39:19 NetworkManager: [1263213559.003289] ensure_killed(): vpn service pid 4502 cleaned up Because the gethostbyname is failing, I suppose that the NetworkManager doesn't know that I use proxies for accessing Internet. I'm not sure that this is the real problem. Could you tell me a solution to make gesthostbyname not failing anymore?

    Read the article

  • Configuring external SMTP server on Azure VM - messages staying in queue

    - by Steph Locke
    I have an external SMTP provider: auth.smtp.1and1.co.uk I am trying to send SQL Server Reporting Services emails via this on an Windows 2012 Azure VM. It is configured sufficiently correctly for emails to be generated, but I've not configured something or mis-configured something as the emails then stay in the queue. Setup details Configured SMTP Virtual Server General: IP Address: Fixed value Access: Access Control: Authentication: ticked Anonymous access Access: Connection Control: All except the list below (which is empty) Access: relay restrictions: Only the list below (which contains 127.0.0.1), ticked 'allow all..' option Delivery: Outbound Security...:Basic Authentication with username and password completed, ticked TLS encryption Delivery: Outbound connections...:TCP port=587 Delivery: Advanced: FQDN=ServerName, smarthost=auth.smtp.1and1.co.uk I then set the following SSRS rsreportserver.config values: <SMTPServer>100.92.192.3</SMTPServer> <SendUsing>2</SendUsing> <SMTPServerPickupDirectory> c:\inetpub\mailroot\pickup </SMTPServerPickupDirectory> <From>[email protected]</From> Tried so far 1) turning the smtp service off and on again (just in case) 2) run SMTPDiag with no errors (also no emails) 3) tried turning off the firewall for the ports (and more generally to see if it made a difference) 4) tried generation from powershell which resulted with message in queue 5) added 25 and 857 as endpoint 6) perused the event log and found some warnings that appear to be about the recipient Message delivery to the remote domain 'gmail.com' failed for the following reason: Unable to bind to the destination server in DNS. Message delivery to the host '212.227.15.179' failed while delivering to the remote domain 'gmail.com' for the following reason: The remote server did not respond to a connection attempt. 7) tried pinging but this appears to be blocked on azure 8) tried more powershell sending on different domains variants (localhost, boxname, internal ip used in smtp properties, 127.0.0.1) - none resulting in success 9) tried adding a remote domain - no change Could anyone recommend what step 10 should be in fixing this issue please?

    Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >