Search Results

Search found 7940 results on 318 pages for 'intel wireless'.

Page 146/318 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

  • Performance difference between MacBook Pro (2.8 GHz) vs Air (1.7 GHz)?

    - by jonathanconway
    I'm comparing these two Apple laptops: MacBook Pro (13", 2011 model): 2.8GHz dual-core Intel Core i7 processor with 4MB shared L3 cache 4GB (two 2GB SO-DIMMs) of 1333MHz DDR3 SDRAM AMD Radeon HD 6770M graphics processor with 1GB of GDDR5 memory on 2.4GHz configuration MacBook Air (13", 2011 model): 1.7GHz dual-core Intel Core i5 with 3MB shared L3 cache 4GB of 1333MHz DDR3 onboard memory Intel HD Graphics 3000 processor with 384MB of DDR3 SDRAM shared with main memory There's definitely a gap between them in terms of CPU speed and graphics, but what practical difference would this make on a day-to-day basis? On the one hand, I love the sleek, thin appearance of the Air. On the other hand, I don't want a machine that's going to be dog-slow when doing tasks such as running Virtual Machines, dual-booting to Windows and running multiple instances of Visual Studio, and maybe some light gaming. Is there going to be a major difference that makes the MacBook Pro a more attractive purchase?

    Read the article

  • Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

    - by Di
    I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

    Read the article

  • Running bridged-networking vmware player on a Linux machine with 2 interfaces

    - by Roman D
    I have got a laptop running Arch Linux with 2 interfaces: wireless (wlan0) and ethernet (eth0). I use wlan0 to access internet (static IP, networking is configured using netcfg), and I connect a second PC to the eth0. Now, whenever I start vmware player (v. 4.0.4), it chooses wlan0 to connect its bridged virtual NIC to, but I need it to connect to eth0 (I want my guest machine to be able to talk to the second physical PC on eth0). So, I disable the wlan0 interface (netcfg -d wireless) and restart vmware. Now, it connects to eth0, and everything works fine; I can ping the host PC from the virtual one, and I can ping the virtual PC from the second physical PC connected to eth0. Then, if I try to reenable the wlan0 interface (netcfg -u wireless), all of the connectivity between the host and the guest (and between the second physical PC and the guest) gets lost, until I disable wlan0 again. Can someone please give me a hint on what's going on?

    Read the article

  • Can I easily use a VPN to duplicate SSH Tunneling functionality?

    - by Steve V.
    Right now, when I want to use an unsecured wireless connection with my (Linux) laptop, I secure my connection using a variation of the method provided here. However, to the best of my knowledge, the (non-jailbroken) iPad does not allow applications to tunnel traffic through local ports. However, it does seem to allow certain VPN traffic. I have never set up, or even used, a VPN before. I'm looking for confirmation that I'm not barking up the wrong tree before I invest significant effort into setting up my own VPN server. If I want to secure my wireless iPad traffic over an unsecure wireless connection, would I be on the right track by looking at a VPN?

    Read the article

  • Driverpack Solution makes a whole bunch of programs

    - by Markasoftware
    I am using Driver Pack solution 12.3 to update my drivers. I used it and installed 55 drivers. I noticed that there are now several dozen new entries in add/remove programs under the name Windows Driver Package - Intel hdc, Windows Driver Package - Intel System, and Windows Driver Package - Intel USB with the driverpack solution logo next to them. When I hit uninstall for any of these, it says all devices using this driver will be removed, and I am scared of uninstalling anything I do not know about. I have no system restore points before I updated my driver. Will these extra driver packages slow down my computer or take up extra disk space? Can I uninstall them safely? I am using Windows 8, so refreshing the computer is an option.

    Read the article

  • Will Dolphin emulator run (smoothly) on this machine?

    - by Mark
    Product Specs: Intel® NM10 Express chipset /w Intel® Atom® D525 (dual-core, 1.8 GHz) I think the most I can put in there for RAM is 4 GB. (They don't make 8 GB SODIMM do they?) The Dolphin site is pretty vague about requirements: Windows XP or higher, or Linux, or MacOSX Intel Fast CPU with SSE2. GPU with Pixel Shader 2.0 or greater. Some integrated graphics chips work but it depends on the model (and only with DirectX 9). I'm trying to make a light-weight quiet little machine for streaming video and playing eumulators, and I'm trying to figure out the minimum requirements I will need to do what I want. I know I'm not supposed to ask for product recommendations here, so if you could just advise the minimum requirements in terms of CPU, graphics card, and RAM, that'd be helpful.

    Read the article

  • nVidia driver is not installed for x64 Windows 7 (Vaio VGN-SZ460N)

    - by Sergey Osypchuk
    I just upgraded memory to 4GB for Sony Vaio VGN-SZ460N laptop and trying to install Windows 7 x64. All works fine with default drivers, except video - I am not able to set resolution more than 1024x768. Technical specification says that this model is using: Chipset : Intel® 945GM Processor : NVIDIA® GeForce® Go 7400 notebook graphics processing unit (GPU) and Intel® Graphics Media Accelerator 950 I was trying to use Intel 945GM driver, for Windows 7 Ultimate x64 and get error: This computer does not meet the mininum requirements for installing the software Also, I was trying to download nVidia GeForce Go 7400 x64 but it says that there is no compatible hardware. Actually, it has disclaimer that those drivers doesn't work for Sony vaio and recomendation to use OEM website. Sony website has only 32-bit version of driver which says that it cannot be installed and x64 should be used... Any ideas?

    Read the article

  • How to force-restart a PC with vPro technology?

    - by Dan Nissenbaum
    I would like to know how to force-restart a PC that has crashed/hung and become completely non-responsive, using 2nd-generation vPro technology. Assume there is a second, fully responsive PC on the same LAN that can be accessed remotely to assist. Specifically, I am considering purchasing a PC with an i7-2860QM CPU, which is vPro-enabled (according to Intel). Here are two links that indicate it should be possible to force-restart a hung system with a 2nd-generation vPro-enabled CPU: Seconds 24-39 of What Is Intel vPro™ Technology? Page 17 (21 of the PDF) of Intel® vPro™ Technology: Reference Guide However, after extensive research, I cannot find a straightforward and trustworthy source of confirmation that this will actually work as I describe, or any documentation about how to set it up. I would appreciate both a reliable confirmation, and a source of documentation. This question is a follow-up to: Wake-on-LAN (WOL) fails after computer crashes (Windows 7 64-bit).

    Read the article

  • setting up an access point from laptop to provide internet

    - by Avo
    i am trying to connect my wireless router as an access point from my laptop. the scenario is as follows: i have a wireless broadband connection at home, which i connect to using a username and a password. this username and password is unique, and can be used by one computer at a time!.. my sister and i can't have internet both at the same time! so im trying to connect my wireless router to my laptop with a physical cable so that i can provide internet via WiFi... first off, is this possible?!.. if not, what are my options? if it is possible, how do i set it up? a link to the appropriate steps would do as well, but i need it :(... thank you in advance, /av

    Read the article

  • Crossover LAN connection between Ubuntu And Windows 7 is not working

    - by brett
    my question is closely related to: How do I connect Ubuntu 10.04 and Windows 7 with an Ethernet cable? What I am after is: Windows 7-------wireless-----\ Wifi router Ubuntu 10.04----wireless-----/ Windows 7-------wireless-----\ | cross_over_cable Wifi router | Ubuntu 10.04----wireless-----/ What I did was On Windows edit system32\drivers\etc\hosts Add the following line: 192.168.253.2 my_ubuntu_computer_name_&-wired //?not sure if this is right On Ubuntu: sudo gedit /etc/hosts Add the following line: 192.168.253.1 my_pc_computer_name&-wired //?not sure if this is right and then Ubuntu 12.04 as the host Right click on the Network Manager applet, click Edit Connections... In the Wired tab, click Auto eth0, then click Edit... In the IPv4 Settings tab, change Method: to Shared to other computers. Click Apply and enter your password when it asks you. Close everything and reboot. Plug the Ethernet cable into both computers. But, I can connect to my windows network folders from ubuntu via wifi I can't connect to my ubuntu network folders from windows via wifi(in fact this bit was working before - so my wifi connection is worse) my ubuntu Auto Ethernet seems to be on From Ubuntu eth0 Link encap:Ethernet HWaddr 00:11:2f:f3:43:8d inet addr:10.42.0.1 Bcast:10.42.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:2fff:fef3:438d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:172 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:27279 (27.2 KB) Interrupt:19 Base address:0xe400 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1147 errors:0 dropped:0 overruns:0 frame:0 TX packets:1147 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94380 (94.3 KB) TX bytes:94380 (94.3 KB) wlan0 Link encap:Ethernet HWaddr 00:03:c9:e9:6f:bf inet addr:10.1.1.7 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::203:c9ff:fee9:6fbf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13186 errors:0 dropped:0 overruns:0 frame:0 TX packets:12187 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1598882 (1.5 MB) TX bytes:1189555 (1.1 MB) From Windows: Windows IP Configuration Ethernet adapter Bluetooth Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : BoB Link-local IPv6 Address . . . . . : fe80::ecf7:c445:3725:b9c1%12 IPv4 Address. . . . . . . . . . . : 10.1.1.4 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.1.1.1 Tunnel adapter Local Area Connection* 15: Connection-specific DNS Suffix . : IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:1423:3ae3:f5fe:fefb Link-local IPv6 Address . . . . . : fe80::1423:3ae3:f5fe:fefb%23 Default Gateway . . . . . . . . . : :: Tunnel adapter isatap.BoB: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : BoB Tunnel adapter isatap.{D0C8EBA1-335D-4620-8570-6C36E8786D72}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . :

    Read the article

  • How do you passthrough native SATA drives to a guest on ESXi?

    - by John
    I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

    Read the article

  • is it possible for a router to provide different gateway?

    - by Hao
    i have tp-link wireless router 192.168.10.188, i was can make it function as DHCP provider(range 192.168.10.100 to 192.168.10.109). the only thing that i cannot make it work as intended, is for it to provide different gateway (192.168.10.1), the computers that obtain IP from that router properly get everything(dynamic IP and dns IP), but there is no function on that router to provide different gateway, the computers always get the router's address(192.168.10.188) as gateway. is there a router that can provide different gateway other than its own address? or the question should be, is the dhcp of a router can provide different gateway other than its own address? note: i cannot make the wireless router address as 192.168.10.1, we have main router(non-wireless, address is 192.168.10.1) that is connected directly to internet

    Read the article

  • Routing table change to access Internet over mifi

    - by Randall Blake
    I have two networks at home. One uses a Verizon mifi wireless on 192.168.1.1. The other uses a dlink router on 192.168.0.1. I have one laptop with two nics, one wireless and one not. The wireless nic connects to the mifi. The Ethernet nic connects to the dlink router. It's ip is 192.168.0.2. I also have a laptop with only one nic connected to the dlink on 192.168.0.3. I want to connect laptop 2 to the Internet. Can I do that by adding an entry to the routing table so that destination 0.0.0.0 routes to 192.168.0.2? If I do that, will laptop 1 "know" that it should route traffic from 192.168.0.3 to 192.168.1.1? Thanks for any assistance.

    Read the article

  • UDP multicast streaming of media content over WIFI

    - by sajad
    I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

    Read the article

  • How to set up my network/bridging using Apple Airport equipment?

    - by John
    I'd like to set up my network like this, and I want to make sure it's possible using the hardware I have. I think it should be... I've got my cable modem in one room. I want to plug it into an Apple Airport Express and create my wireless my wireless network here. The airport express will do the NAT and DHCP. By my TV there are a few things to be networked (Xbox and Tivo). I have an airport extreme here. I'd like to have the airport extreme join the wireless network and share the connection to the ethernet ports. Can anyone provide some assistance on the best way to configure to do this? Thanks!

    Read the article

  • Issue Connecting two home networks

    - by Alex
    Hi, I have a home networking question. I have two DLINK wireless/wired routers in my house, connected to the Internet ISP. There are a 2 computers on each of the two networks. Network1: has 192.168.0.0 (gateway) Valid IP'S range - 192.168.0.1 - 192.168.0.10, with COMP1 having a fixed IP of 162.168.0.1 Network2: has 192.168.0.100 (gateway) Valid IP'S range - 192.168.0.101 - 192.168.0.110 with COMP2 having a static IP of 162.168.0.101, a WIRELESS printer on 192.168.0.102 Both routers have a netmask of 255.255.255.0 My need is to connect the two routers, so that I can Remote desktop for COMP1 to COMP2 and viceversa, and COMP1 to connect to the wireless printer on Network2. can anyone help to set this up so that the both networks can talk to each other. Any help is appreciated. -Alex

    Read the article

  • Wrong screen resolution with HDMI output to HDTV

    - by bruno077
    I own an HDTV with a native resolution of 1360x768. Sometimes I plug in my laptop to watch movies, and I used to do it with a VGA cable. I've had no problem setting the laptop to the TV native resolution with the VGA cable (1360x768). Having acquired an HDMI cable recently, I can't go past 1280x720, and if I do, the TV displays "invalid format". At 1280x720, the image is viewable but not centered, so for example I can't see the windows taskbar or titlebars. I've tried both cables (VGA and HDMI) with the same settings: Laptop's display turned off and trying to set the Tv's native resolution. What could I try to fix this issue? Could it be a faulty cable? (I'm using a Thinkpad with Windows 7) EDIT: My graphics adapter appears listed as Mobile Intel(R) 4 Series Express Chipset Family (Searching for my laptop's model yields Intel GMA 4500MHD as the graphic card) I'm downloading a driver update from Intel's website. I'll report my progress when I check its behavior tomorrow.

    Read the article

  • How to make routes on a windows 7 laptop persistent?

    - by askvictor
    I have a number of (windows 7) laptops that normally connect via wireless. We also have a wired network for special purposes. When one of these laptops plugs in to the wired network, at the moment, it makes the wired network the default route. Instead, I would like it to keep the wireless network the default, and route only 10...* through the wired. I can achieve this with: route delete 0.0.0.0 IF 22 route add 10.0.0.0 ... IF 22 (where IF 22 is the wired network interface). But how can I get this to stick? Currently, if the wired network is unplugged then re-plugged, it grabs the default route again. So I want a way of making the wireless network not get the default route, and to make the 10...* network persistent. Is there a hook to run commands after a network connection is established in windows? In linux I would use post-up hooks.

    Read the article

  • Where should I plug in my monitor -- Motherboard or Graphics card?

    - by Jeremy White
    Assuming I am using the following equipment... motherboard with HDMI/DVI & no embedded graphics discrete graphics card (nVidia or ATI) on PCI-E slot Intel CPU with integrated graphics ...where should I plug my monitor into the computer? Presumably, I'll get the fastest speed on games connected directly to the graphics card. But there is also power savings when connecting to the motherboard and accessing the Intel on-board graphics. I've read that some motherboards can switch automatically between the Intel graphics and discrete graphics. Is that something that works well, and where do I connect the monitor to enable that?

    Read the article

  • How do you passthrough native SATA drives to a guest on ESXi?

    - by John
    I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

    Read the article

  • Do I need a Gigabit router with a 24MB/s down and 7MB/s upload speed cable modem?

    - by djangofan
    Do I need a Gigabit port capable wireless router with a 24MB/s down and 7MB/s upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 MB/s port can easily handle it. Is that true?

    Read the article

  • How can I make the NetworkManager work?

    - by Yang Jy
    I am running a version of RHCE6 on my laptop, and lately I've been trying various stuff about network configuration through command line. Last night, I tried removing the NetworkManager using "yum remove NetworkManager" from the system, so that I could have more control of the network through the command line. But the result is, I didn't manage to configure the wireless connection through wpa_supplicant, and I need wireless connection during my travel to another place. So I need the wireless function back as soon as possible. I typed " yum install NetworkManager", some version installed, but I don't get to have an icon on the taskbar, and of course, the network doesn't work. The package I previously removed(about 24MB) was much larger that the one I just installed(about 2MB), so I think some dependencies must be missing. How could I install all these dependencies? Please help!

    Read the article

  • Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

    - by Di
    I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router. All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled. Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this? How do I fix it?

    Read the article

  • Ubuntu: On a network with many clients there are two machines that can't access the web via a browser at the same time

    - by ChrisInCambo
    Ok I'm pulling my hair out over this one. We have a wireless network with many clients all working well except two Ubuntu clients running 10.10 that can't access the internet via a browser at the same time. They can both still ping, use Skype etc but can't browse. As soon as the one that can browse exits the network browsing returns for the other and vice versa. As ping and Skype was working I assumed some kind of DNS problem but moving over to OpenDNS didn't solve it, nor did restarting networking or using wired rather than wireless. We also switched out the router, and it still persisted so I'm sure this isn't a network issue. The two clients are both laptops and work fine together on a wireless network at another office (which we don't control). I'm thinking something must be cached from the other network they both use that's causing this but have no idea what. Does anyone have any ideas? I just don't know where to go from here.

    Read the article

  • How to make my display Grayscale?

    - by Oldarney
    I want to reduce the saturation of my laptop monitor to the point that it is almost grayscale. That's the goal. Intel and Asus don't have an answer. Asus Splendid and the intel graphics control panel can increase the saturation, but not lower it. I would prefer a software solution, although I DIY'ed a vga grayscale adapter for my desktop. I have an Asus UL30A with an Intel GMA 4500MHD. I know that the latest ATI cards, windotosh's and high end nvidia cards all support control panel desaturation. Why? black and white makes me 3 times more productive.

    Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >