Search Results

Search found 20822 results on 833 pages for 'remote desktop gateway'.

Page 146/833 | < Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >

  • Android Remote Service Keeps Restarting

    - by user244190
    Ok so I've built an app that uses a remote service to do some real time GPS tracking. I am using the below code to start and bind to the service. The remote service uses aidl, sets up a notification icon, runs the GPS and locationListener. In onLocationChanged, a handler sends data back to the caller via the callback. Pretty much straight out of the examples and resources online. I want to allow the service to continue running even if the app closes. When the app is restarted, I want the app to again bind to the service (using the existing service if running) and again receive data from the tracker. I currently have the app mode set to singleTask and cannot use singleinstance due to another issue. My problem is that quit often even after the app and service are shut down either from the app itself, or from AdvancedTaskKiller, or a Forceclose, the service will restart and initialize the GPS. touching on the notification will open the app. I again stop the tracking which removes the notification and turns off the GPS Close the app, and again after a few seconds the service restarts. The only way to stop it is to power off the phone. What can I do to stop this from happening. Does it have to do with the mode of operation? START_NOT_STICKY or START_REDELIVER_INTENT? Or do I need to use stopSelf()? My understanding is that if the service is not running when I use bindService() that the service will be created...so do I really need to use start/stopService also? I thought I would need to use it if I want the service to run even after the app is closed. That is why i do not unbind/stop the service in onDestroy(). Is this correct? I've not seen any other info an this, so I,m not sure where to look. Please Help! Thanks Patrick //Remote Service Startup try{ startService(); }catch (Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } } try{ bindService(); }catch (Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } //Remote service shutdown try { unbindService(); }catch(Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } try{ stopService(); }catch(Exception e) { Toast.makeText(ctx, e.getMessage().toString(), Toast.LENGTH_SHORT).show(); } private void startService() { if( myAdapter.trackServiceStarted() ) { if(SETTING_DEBUG_MODE) Toast.makeText(this, "Service already started", Toast.LENGTH_SHORT).show(); started = true; if(!myAdapter.trackDataExists()) insertTrackData(); updateServiceStatus(); } else { startService( new Intent ( "com.codebase.TRACKING_SERVICE" ) ); Log.d( "startService()", "startService()" ); started = true; updateServiceStatus(); } } private void stopService() { stopService( new Intent ( "com.codebase.TRACKING_SERVICE" ) ); Log.d( "stopService()", "stopService()" ); started = false; updateServiceStatus(); } private void bindService() { bindService(new Intent(ITrackingService.class.getName()), mConnection, Context.BIND_AUTO_CREATE); bindService(new Intent(ITrackingSecondary.class.getName()), mTrackingSecondaryConnection, Context.BIND_AUTO_CREATE); started = true; } private void unbindService() { try { mTrackingService.unregisterCallback(mCallback); } catch (RemoteException e) { // There is nothing special we need to do if the service // has crashed. e.getMessage(); } try { unbindService(mTrackingSecondaryConnection); unbindService(mConnection); } catch (Exception e) { // There is nothing special we need to do if the service // has crashed. e.getMessage(); } started = false; } private ServiceConnection mConnection = new ServiceConnection() { public void onServiceConnected(ComponentName className, IBinder service) { // This is called when the connection with the service has been // established, giving us the service object we can use to // interact with the service. We are communicating with our // service through an IDL interface, so get a client-side // representation of that from the raw service object. mTrackingService = ITrackingService.Stub.asInterface(service); // We want to monitor the service for as long as we are // connected to it. try { mTrackingService.registerCallback(mCallback); } catch (RemoteException e) { // In this case the service has crashed before we could even // do anything with it; we can count on soon being // disconnected (and then reconnected if it can be restarted) // so there is no need to do anything here. } } public void onServiceDisconnected(ComponentName className) { // This is called when the connection with the service has been // unexpectedly disconnected -- that is, its process crashed. mTrackingService = null; } }; private ServiceConnection mTrackingSecondaryConnection = new ServiceConnection() { public void onServiceConnected(ComponentName className, IBinder service) { // Connecting to a secondary interface is the same as any // other interface. mTrackingSecondaryService = ITrackingSecondary.Stub.asInterface(service); try{ mTrackingSecondaryService.setTimePrecision(SETTING_TIME_PRECISION); mTrackingSecondaryService.setDistancePrecision(SETTING_DISTANCE_PRECISION); } catch (RemoteException e) { // In this case the service has crashed before we could even // do anything with it; we can count on soon being // disconnected (and then reconnected if it can be restarted) // so there is no need to do anything here. } } public void onServiceDisconnected(ComponentName className) { mTrackingSecondaryService = null; } }; //TrackService onDestry() public void onDestroy() { try{ if(lm != null) { lm.removeUpdates(this); } if(mNotificationManager != null) { mNotificationManager.cancel(R.string.local_service_started); } Toast.makeText(this, "Service stopped", Toast.LENGTH_SHORT).show(); }catch (Exception e){ Toast.makeText(this, e.getMessage(), Toast.LENGTH_SHORT).show(); } // Unregister all callbacks. mCallbacks.kill(); // Remove the next pending message to increment the counter, stopping // the increment loop. mHandler.removeMessages(REPORT_MSG); super.onDestroy(); } ServiceConnectionLeaked: I'm seeing a lot of these: 04-21 09:25:23.347: ERROR/ActivityThread(3246): Activity com.codebase.GPSTest has leaked ServiceConnection com.codebase.GPSTest$6@4482d428 that was originally bound here 04-21 09:25:23.347: ERROR/ActivityThread(3246): android.app.ServiceConnectionLeaked: Activity com.codebase.GPSTest has leaked ServiceConnection com.codebase.GPSTest$6@4482d428 that was originally bound here 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$PackageInfo$ServiceDispatcher.<init>(ActivityThread.java:977) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$PackageInfo.getServiceDispatcher(ActivityThread.java:872) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ApplicationContext.bindService(ApplicationContext.java:796) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.content.ContextWrapper.bindService(ContextWrapper.java:337) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.bindService(GPSTest.java:2206) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.onStartStopClick(GPSTest.java:1589) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.codebase.GPSTest.onResume(GPSTest.java:1210) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.Instrumentation.callActivityOnResume(Instrumentation.java:1149) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.Activity.performResume(Activity.java:3763) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.performResumeActivity(ActivityThread.java:2937) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleResumeActivity(ActivityThread.java:2965) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2516) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.handleRelaunchActivity(ActivityThread.java:3625) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.access$2300(ActivityThread.java:119) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1867) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.os.Handler.dispatchMessage(Handler.java:99) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.os.Looper.loop(Looper.java:123) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at android.app.ActivityThread.main(ActivityThread.java:4363) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at java.lang.reflect.Method.invokeNative(Native Method) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at java.lang.reflect.Method.invoke(Method.java:521) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:860) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:618) 04-21 09:25:23.347: ERROR/ActivityThread(3246): at dalvik.system.NativeStart.main(Native Method) And These: Is this ok, or do I need to make sure i deactivate/close 04-21 09:58:55.487: INFO/dalvikvm(3440): Uncaught exception thrown by finalizer (will be discarded): 04-21 09:58:55.487: INFO/dalvikvm(3440): Ljava/lang/IllegalStateException;: Finalizing cursor android.database.sqlite.SQLiteCursor@447ef258 on gps_data that has not been deactivated or closed 04-21 09:58:55.487: INFO/dalvikvm(3440): at android.database.sqlite.SQLiteCursor.finalize(SQLiteCursor.java:596) 04-21 09:58:55.487: INFO/dalvikvm(3440): at dalvik.system.NativeStart.run(Native Method)

    Read the article

  • Is Paypal the best solution for payment gateway for a website?

    - by Pennf0lio
    I have a realty website that needs a payment gateway for their property reservation. The reservation fee range from $500-$600 and about 5-6 people per month. I was wondering if Paypal is the best solution for accepting Payment. What will be the Pros and Cons using Paypal. Paypal was my first choice because It's easy to integrate on my existing website and I wouldn't be minding so much on the security. P.S. It's not a part of the question, But If you can site some realty website that accept payment and would be a good inspiration. It would be highly appreciated. Thanks!

    Read the article

  • What are these errors when I try to "make" the driver of my wireless adapter?

    - by Tom Brito
    I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme says to use the make command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

    Read the article

  • What are these errors when I try to "make" the driver of my wireless network?

    - by Tom Brito
    I got got a wireless to usb adapter, and I'm having some trouble to install the drivers on Ubuntu. First of all, the readme file say to use the "make" command, and I already got errors: $ make make[1]: Entering directory `/usr/src/linux-headers-2.6.35-22-generic' CC [M] /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c: In function ‘rtl8192_usb_probe’: /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12325: error: ‘struct net_device’ has no member named ‘open’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12326: error: ‘struct net_device’ has no member named ‘stop’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12327: error: ‘struct net_device’ has no member named ‘tx_timeout’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12328: error: ‘struct net_device’ has no member named ‘do_ioctl’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12329: error: ‘struct net_device’ has no member named ‘set_multicast_list’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12330: error: ‘struct net_device’ has no member named ‘set_mac_address’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12331: error: ‘struct net_device’ has no member named ‘get_stats’ /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.c:12332: error: ‘struct net_device’ has no member named ‘hard_start_xmit’ make[2]: *** [/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u/r8192U_core.o] Error 1 make[1]: *** [_module_/home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/HAL/rtl8192u] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.35-22-generic' make: *** [all] Error 2 /home/wellington/Desktop/rtl8192su_linux_2.4_2.6.0003.0301.2010/ is the path where I copied the drivers on my computer. Any idea how to solve this? (I don't even know what the error is...) update: sudo lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 03 serial: 78:e3:b5:e7:5f:6e size: 10MB/s capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:42 ioport:d800(size=256) memory:fbeff000-fbefffff memory:faffc000-faffffff memory:fbec0000-fbedffff *-network DISABLED description: Wireless interface physical id: 2 logical name: wlan0 serial: 00:26:18:a1:ae:64 capabilities: ethernet physical wireless configuration: broadcast=yes multicast=yes wireless=802.11b/g

    Read the article

  • Magento not responding to payment gateway notifications fast enough or at all?

    - by robgt
    Some of our customers are getting to the confirmation of payment step in purchasing from our Magento store, and then they are getting a timeout error, where the SagePay payment gateway is trying to contact our server to tell it that a payment was successful (or not…) but it cannot contact our server, or cannot get a response from our server in a timely manner, and then the payment/order is being cancelled. I've raised this question to my hosting company, but all they told me was: "This is down to the way the software is configured on your server" This is currently a Magento 1.4.0.1 standard installation as far as payment gateways are concerned. What on earth could this statement mean? Is there some configuration that I need to do to make Magento listen to these requests and respond properly?

    Read the article

  • Developing web sites that imitate desktop apps. How to fight that paradigm? [closed]

    - by user1598390
    Supposse there's a company where web sites/apps are designed to resemble desktop apps. They struggle to add: Splash screens Drop-down menus Tab-pages Pages that don't grow downward with content, context is inside scrollable area so page is of a fixed size, as if resembling the one-screen limitation of desktop apps. Modal windows, pop-ups, etc. Tree views Absolutely no access to content unless you login-first, even with non-sensitive content. After splash screen desapears, you are presented with a login screen. No links - just simulated buttons. Fixed page-size. Cannot open a linked in other tab Print button that prints directly ( not showing printable page so the user can't print via the browser's print command ) Progress bars for loading content even when the browser indicates it with its own animation Fonts and color amulate a desktop app made with Visual Basic, PowerBuilder etc. Every app seems almost as if were made in Visual Basic. They reject this elements: Breadcrumbs Good old underlined links Generated/dynamic navigation, usage-based suggestions Ability to open links in multiple tabs Pagination Printable pages Ability to produce a URL you can save or share that links to an item, like when you send someone the link to an especific StackExchange question. The only URL is the main one. Back button To achieve this, tons of javascript code is needed. Lots and lots of Javascript and Ajax code for things not related with the business but with the necessity to hide/show that button, refresh this listbox, grey-out that label, etc. The coplexity generated by forcing one paradigm into another means most lines of code are dedicated to maintain the illusion of a desktop app. What is the best way to change this mindset, and make them embrace the web, and start producing modern, web apps instead of desktop imitations ? EDIT: These sites are intranet sites. Users hate these apps. They constantly whine about them, but they have to use them to do their daily work. These sites are in-house solutions, the end-users have no choice but to use them. They are a "captive audience". Also, substitution will not happen because of high costs. But at least if that mindset is changed, new developments would be more web-like.

    Read the article

  • How to define default gateway with multiple DHCP interfaces?

    - by DrumEater
    How does ifconfig determine which network interface to use as the default when DHCP assigns a default route for each NIC? It seems like it's in a race-condition and I need to have a more reliable solution. Is there a setting in /etc/network/interfaces that could define the preferred gateway? I read about "metric" but that did not seem to function. 10.04 LTS Server with two NICs on a managed network. IP addresses are assigned via DHCP which I do not manage. eth0 is assigned a private NAT address; eth1 is assigned a public IP.

    Read the article

  • Reference remotely located assembly (web uri) from locally installed application?

    - by moonground.de
    Hi Stackoverflowers! :) We have a .NET application for Windows which is installed locally by Microsoft Installer. Now we have the need to use additional assemblies which are located online at our Web Servers. We'd like to refer to a remote uri like https://www.ourserver.com/OurProductName/ExternalLib.dll and reveal additional functionality, which is described roughly by a known common ("AddIn/Plugin") Interface. These are not 3rd Party Plugins, we just want be able to exchange parts of the application frequently, without the need to have frequent software updates. Our first idea was to add some kind of "remote refence" in Visual Studio by setting the path to the remote assembly uri. But Visual Studio downloaded the assembly immediately to a temporary directory, adding a reference to it. Our second attempt then, is simply using a WebRequest (or WebClient) to retrieve a binary stream of the Assembly, loading it "from image" by using Assembly.Load(...). This actually works, but is not very elegant and requires more additional programming for verification etc. We hoped Clickonce would provide useful techniques but apparently it's suitable for standalone applications only. (Correct me?) Is there a way (.net native or by framework/api) to reference remotely located assemblies? Thanks in advance and have a happy easter!

    Read the article

  • How to use tscon on Windows7?

    - by Radek
    I need to run overnight automation testing using RFT and IE on Windows7 virtual machine. I found that restarting the Windows box before the testing starts helps. I am moving the production environment from Windows XP to Windows 7. RFT used to complain when running RFT scripts that CRFCN0557E: Activation failed when running under a Terminal Services environment. This may be caused by using a minimized terminal window - try playing back without minimizing the terminal window (it does not need to be full-screen). Running tscon.exe 0 /dest:console prior starting any RFT script fix the error on Windows XP. But not on Windows7. I did some research and was trying for hours to fix that but nothing helped. There is no screen saver turned on on Windows7. I tried to run both but nothing helped. tscon.exe 0 /dest:console tscon.exe 1 /dest:console On Windows7 tscon returns {ErrorPrintf(): LoadString failed, Error 15105, (0x00003B01)} Error [15105]:The resource loader cache doesn't have loaded MUI entry. Error [0]:The operation completed successfully. On Windows XP tscon returns Could not connect sessionID 0 to sessionname console, Error code 7045 Error [7045]:The requested session access is denied. I just double checked that running tscon.exe 0 /dest:console on Windows XP solves the issue. Cannot understand the output of the tscon command then. Any idea how I can run RFT scripts after I restart the Windows box automatically? Preferably without involving any other computer. I was even thinking to use the old Windows XP to make remote desktop session to make RFT happy. I hope there is other better solution to that.

    Read the article

  • Cant access Dell BMC IPMI Over IP

    - by Bobb
    I have Dell R210 with iDRAC BMC (new name for old BMC). Which is on-board feature with shared NIC (I believe). Server is on colocation and I didnt set it up before sent there... So I asked for the remote hands to setup IPMI Over IP. They enabled it, set the IP and everything. The IP is different than main box IP. Also the box is cabled to NIC1 and the BMC supposed to share it (am I right?) I can see new IP in the Open Server Administrator (installed on the box). I tried Supermicro IPMI tool and I tried Dell ipmish.exe command like this ipmish -ip xxx -u root -p calvin sysinfo gives BMC is not detected What could be wrong? is there a diagnostics tool I can try? It must be something obvious. I just never used things like that before.... P.S. I read something about encryptions key in the Dell docs. But I understand that is for encrypted IPMI 2.0 and ipmish can use IPMI 1.5 without encryption.

    Read the article

  • Improving Performance of RDP Over LAN

    - by Jared Brown
    Architecture: A deployment of 6 new HP thin clients (Windows XP Embedded) with TCP/IP access to several new HP servers (Windows 2003 Server). Each thin client is connected over fiber optic to a Gigabit Cisco switch, which the servers are connected to. There are 10/100 Ethernet to fiber converter boxes on each end of the fiber cables. Problem: Noticeable lag over RDP while using the Unigraphics CAD package. 3D models take .5 to 1 second to respond to mouse actions. Other Details: Network throughput on each thin client's RDP session is 7288 kbps. RDP connection settings - color setting: 15k, all themes, etc. turned off. Local and remote system performance stats are well within norms (CPU, Memory, and Network). Question: Are there newer versions of terminal services or RDP I can use on my existing OSes? Are there compression algorithms, etc. that are well suited for a high-bandwidth LAN? Are there valid alternatives that will yield higher performance (i.e. UltraVNC with drivers installed)? Are there TCP/IP tuning options I can exploit?

    Read the article

  • Requiring SSH-key Login From Specific IP Ranges

    - by Sean M
    I need to be able to access my server (Ubuntu 8.04 LTS) from remote sites, but I'd like to worry a bit less about password complexity. Thus, I'd like to require that SSH keys be used for login instead of name/password. However, I still have a lot to learn about security, and having already badly broken a test box when I was trying to set this up, I'm acutely aware of the chance of screwing myself while trying to accomplish this. So I have a second goal: I'd like to require that certain IP ranges (e.g. 10.0.0.0/8) may log in with name/password, but everyone else must use an SSH key to log in. How can I satisfy both of these goals? There already exists a very similar question here, but I can't quite figure out how to get to what I want from that information. Current tactic: reading through the PAM documentation (pam_access looks promising) and looking at /etc/ssh/sshd_config. Edit: Alternatively, is there a way to specify that certain users must authenticate with SSH keys, and others may authenticate with name/password? Solution that's currently working: # Globally deny logon via password, only allow SSH-key login. PasswordAuthentication no # But allow connections from the LAN to use passwords. Match Address 192.168.*.* PasswordAuthentication yes The Match Address block can also usefully be a Match User block, answering my secondary question. For now I'm just chalking the failure to parse CIDR addresses up to a quirk of my install, and resolving to try again when I go to Ubuntu 10.04 not too long from now. PAM turns out not to be necessary.

    Read the article

  • scp No such file or directory

    - by Joe
    I've a confusing question for which superuser doesn't seem to have a good answer, and neither google. I'm trying to scp a file from a remote server to my local machine. The command is this scp user@server:/path/to/source/file.gz /path/to/destination The error I get is: scp: /path/to/source/file.gz: No such file or directory user is my username on the server. The command syntax appears fine to me. ssh works fine and I can cd to the file and it doesn't seem to be an access control issue? Thanks; Edit: Thank you John. I spotted the issue. ls returned this: -r--r--r-- 1 nobody users 168967171 Mar 10 2009 /path/to/source/file.gz So, the file was on a read-only file system and user is able to read it but not scp. I just copied the file to a different directory and chown it and worked fine. It would be good if someone can explain why this is the case though.

    Read the article

  • Is it possible to stop the "Beep" device on all computers in a Windows network?

    - by sharptooth
    On Windows the default behavior it to make an annoying "beep" sound every time Windows things something notable happened. The result is that when someone send a company-wide email via the MS Exchange all computers around my cubicle beep one by one. This is annoying and makes no sense. Luckily beeping can be shut off. Someone has to: open the "Device Manager", select "View - Show hidden devices", find the "Beep" device in "Non-Pug and Play Devices" node, open its properties, go to the "Driver" tab, set "startup type" to "Disabled" and click "Stop". The "Beep" device will stop and no longer produce the useless sound. This solution however requires tracking every computer and then talking to its user which is not very convenient. Device Manager doesn't allow stopping a device on another computer. I'm looking for a solution that can be deployed by the administrators team. We have a domain and the administrators even install the programs company-wide automatically. Are there any means to stop the "Beep" device an all computers in the Windows network with some remote-administration features automatically?

    Read the article

  • Opening an existing process

    - by Grasper
    I am using Eclipse in Linux through a remote connection (xrdp). My internet got disconnected, so I got disconnected from the server while eclipse was running. Now I logged in again, and I do the "top" command I can see that eclipse is running and still under my user name. Is there some way I can bring that process back into my view (I do not want to kill it because I am in the middle of checking in a large swath of code)? It doesnt show up on the bottom panel after I logged in again. Here is the "top" output: /home/mclouti% top top - 08:32:31 up 43 days, 13:06, 29 users, load average: 0.56, 0.79, 0.82 Tasks: 447 total, 1 running, 446 sleeping, 0 stopped, 0 zombie Cpu(s): 6.0%us, 0.7%sy, 0.0%ni, 92.1%id, 1.1%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 3107364k total, 2975852k used, 131512k free, 35756k buffers Swap: 2031608k total, 59860k used, 1971748k free, 817816k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13415 mclouti 15 0 964m 333m 31m S 21.2 11.0 83:12.96 eclipse 16040 mclouti 15 0 2608 1348 888 R 0.7 0.0 0:00.12 top 31395 mclouti 15 0 29072 20m 8524 S 0.7 0.7 611:08.08 Xvnc 2583 root 20 0 898m 2652 1056 S 0.3 0.1 139:26.82 automount 28990 postgres 15 0 13564 868 304 S 0.3 0.0 26:33.36 postgres 28995 postgres 16 0 13808 1248 300 S 0.3 0.0 6:54.95 postgres 31440 mclouti 15 0 3072 1592 1036 S 0.3 0.1 6:01.54 gam_server 1 root 15 0 2072 524 496 S 0.0 0.0 0:03.00 init 2 root RT -5 0 0 0 S 0.0 0.0 0:04.53 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:01.72 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:04.33 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/2

    Read the article

  • Ubuntu 10.04 RGBA(Transparent theme) bug

    - by Nrew
    I tried to follow this tutorial frome ghacks.net. But I end up with a bug. Everytime I try to change the desktop background or the theme. It opens up lots of folders. And then close it back again. So I cannot do anything when I try to change the background or the theme to the default. Here is the tutorial And I can't even shutdown my machine now, please help. EDIT I tried executing these commands in the terminal sudo add-apt-repository ppa:erik-b-andersen/rgba-gtk sudo apt-get update && sudo apt-get upgrade sudo apt-get install gnome-color-chooser gtk2-module-rgba sudo apt-get install murrine-themes And it installed gnome color changer. It works, and the windows became transparent, but I can't change to the default theme and I can't put a background Here's the screenshot, when I try to change something in the preferences: Its just okay if I can't change the theme, but it won't let me change the background either. Or maybe the background is changed but its transparent just like the other windows. You can see that in the taskbar(or whatever its called in Ubuntu). Its full. What can I do to atleast make the background visible.

    Read the article

  • how would it be possible to discover a cable modem's MAC remotely?

    - by amateurenthusiast
    i was reading the back archives of a canadian privacy law blog, and he linked to a judicial decision. apparently as part of an investigation in which were used yahoo chat and google's old 'hello' image trading program the officer was able to determine a suspect's modem's MAC address: In order to determine who STEPHTOSH was, the officer did a trace on a programme called WHO IS in an effort to learn from where STEPHTOSH was coming. WHO IS is a command program available to the public. The officer was able to ascertain that the person using the name STEPHTOSH was a Rogers Internet customer. The officer was able to obtain the Internet Protocol address, also known as the I.P. There is only one location for an I.P., which is unique to that subscriber. By use of the website known as DNS STUFF.com, one is able to find with which company this I.P. is registered. It was ascertained that the I.P. address used by STEPHTOSH was registered to Rogers Cable, from the Toronto area. The officer also learned the Cable Modem MAC address used by STEPHTOSH. This was all the information the officer was able to amass. now it was my understanding that the MAC address of any given device can only be accessed if you're only one 'hop' away on the Internet. the suspect in question was in Markham and the officer part of the Toronto Police, so it's conceivable that they both might have used Rogers internet. but would that still put them only one 'hop' away from each other? i thought the first hop after the modem was usually the ISP? and if he'd used a netBIOS query against this guy's machine it would return the ethernet card's MAC, not the modem's. so is this guy on the same rogers subnet as the suspect's cable modem, is that functionality part of google's Hello (i could only think that it would be possible if Hello operated as a virtual LAN or something), does the officer have remote access to the arp caches of the routers at Rogers or is he just full of crap and lying to make his case stronger?

    Read the article

  • Can't connect remotely to Windows Server 2008 R2

    - by JohnyD
    I have a new Dell R710 server running Windows Server 2008 R2. I one of it's 4 nic's set up and the rest are not being used. I have successfully given it an ip address, network mask, and dns servers. I can ping and resolve this machine from anywhere else in the network. However, when I try to connect to it via RDP it does several things: 1) it might just outright refuse me with the message, "This computer can't connect to the remote computer. Try connecting again." 2) it might connect me and let me chose the account I would like to log on as... but when you select an account then you receive the same message as in #1 3) it might actually allow you to connect but only for about 1 minute and then you receive the same message and it closes your session. I have configured the firewall service to allow for RDP over the domain network connection. This didn't have any noticible effect. I have now disabled the firewall for all 3 networks and have even stopped the Windows Firewall service. I am still having the same issue. I am new to Server 2008 R2 and things are very different. Please give me any advice you can on how to resolve this issue and/or any other gotchas that are sure to come my way. The 2003 - 2008 learning curve seems steep. Thanks

    Read the article

  • Using my old PC as a web/file server?

    - by Garrett
    I have an old desktop computer that I've been trying to sell for AGES. I guess nobody is looking for computers because it was advertised at a dirt cheap price on craigslist, local papers, etc. Anyways, I was wondering if it would be worth it to set it up as a home file server, a web dev server (I have a web host for actual production use), and maybe host a few server applications (ex: ventrillo). The computer is actually an old Dell that I cannibalized after the motherboard being destroyed by lightning, so it has fairly new parts in it. The specs are: P4 3.4GHz w/ HT and Artic Cooling Freezer 7 3GB DDR2 533 RAM 80GB hdd (will upgrade the hard drive if it's even worth using as a server) basic dvd rom 430 Watt Thermaltake PSU (it might be important to note that it is only 60% efficiency) ATI Radeon x600 256MB Antec 300 case It's not a really beefy machine, I just can't see giving it away or putting it in the corner to just collect dust. I have Windows Server 2008 R2 Standard and I am confident in my skills in operating most Linux operating systems. I'd also be using it to tinker with when I learn new things in my server admin classes (I'm finishing my 2nd year in college at the moment so I'm still learning) Also, my house is quite old and the electrical wiring is pretty poor (it MIGHT be up to code, then again, where I live most people don't even know what regulations are or let alone know how to spell it...) Would it be safe to leave it running all day and is it going to run up my electric bill because of the PSU efficiency? I only have 5mbit cable internet, but I won't be running very bandwidth intense services on it so it should be ok. I should elaborate on why I am concerned about the power. The circuits should be fine, but I'm more concerned about fire hazard. What is the likelihood that the server could cause an electrical fire? Again, thank you all for the feedback!

    Read the article

  • There are currently no logon servers available

    - by Ian Robinson
    I am running a Windows 7 laptop that is joined to my company's domain. When I installed Windows 7, I created an account for myself, joined to the domain, and it had been working quite well even though I'm physically remote most of the time, and not actually on the network. However, today I created a new local user account (non-admin) for my little brother. While he was using it, he decided he wanted to install a program, because his account is not an admin, he was prompted to enter Administrator credentials to allow the program to make changes to his computer. I entered my credentials, and this is the first time I ran into the error message: There are currently no logon servers available to service the logon request. I tried logging off and loggin back in, rebooting, etc etc, and no matter what, every time I try to authenticate as my "normal" domain account - I get that message. I can no longer access my computer as an administrator. I no longer know how to log in to my machine using any other account aside from my little brother's non-admin account. I don't have any other local accounts created, and the default local admin account was never enabled. I'd appreciate any ideas on how I can recover access to my account. Let me know if I can provide any more information. FYI - This is a similar question but not sure any of the answers help me in my case. http://serverfault.com/questions/71632/there-are-currently-no-logon-servers-available-to-service-the-logon-request

    Read the article

  • How to set up a easy-to-use proxy for the whole system with WinXP client and server?

    - by Pekka
    I am working together intensively with a colleague on the Canary Islands. We speak through live messenger and work together using a RDP software. She has frequent problems with connections to certain big-name and small-name sites (amongst others live.com, google.com, gmx.de) very likely to be caused by the spanish provider (the connections simply time out, this has been going on for weeks already). I have been thinking about setting up my computer as a proxy to make these connections work. I have a DSL connection and am behind a NAT capable router that I control. Does anybody know a simple, "one-click" way to transport ALL network traffic through a remote proxy? Without having to set proxy settings for each application that uses the internet? VPN is not an option, because I am behind a firewall that supports protocol 47 and such, but I have never succeeded in getting an incoming VPN connection to work. I can however redirect normal traffic using NAT. A VPN solution that does not need strange protocols would also be an option.

    Read the article

  • Setting up xpra for client use in OS X

    - by Jonathan
    I've been trying to get xpra to run on OS X for the last few days to connect to my Ubuntu server. Note that there's a GUI for it called shifter, but that (at least on OS X) is still far too buggy. For those who don't know what xpra is, if you know what screen is, it's like screen for GUI X Windows apps tunneled over ssh. You can render a remote X app locally so it's faster than sending a series of compresses screen shots (like VNC), but with xpra you can disconnect and reconnect on different computers. To get the basic functionality you can just type "ssh -X server.location" and any GUI app you open from the command line will open locally. I've been able to get xpra to build by doing the following: Download pari-all-0.0.6.tar.gz from the xpra site listed under upstream and untar it. Issue the following Mac Ports command (Dependencies thanks to RogBlog): sudo port install python25 python26 py26-pyrex py26-gtk xorg-libXtst py25-gobject py25-gtk py25-nose py26-nose xorg-libXdamage xorg-libXcomposite xorg-libXtst xorg-libXfixes In the upstream list of v0.0.06 patches (NOT 0.0.8pre!) on the xpra site listed above, download mswindows-conditional-pyrex.patch. Open the patch with your favorite text editor and change the single occurrence of "win" in it to "darwin". Apply the patch to setup.py. Run do-build in the command line. Now where I'm stumped: how do I run xpra? The build produces a sub directory called install/bin in which xpra is located, but when I try to run it I get the following error: Traceback (most recent call last): File "./xpra", line 4, in import xpra.scripts.main ImportError: No module named xpra.scripts.main There is a file called main.py under xpra/scripts, but I don't know any python and I'm not sure if this is what it's looking for, and what to do with it even if it is. My goal is to set up xpra so I can install it into /usr/bin (or some other common path for executables) and execute it whenever I please. What do I do next?

    Read the article

  • Arch Linux: How to handle patches which only you will use?

    - by user12932
    I'm using freerdp together with xmonad and it has been giving me a lot of trouble. The super key (or "windows key") is my mod key in xmonad and it has been interfering with my freerdp usage rather annoyingly. Whenever I switched workspaces (or did anything else in xmonad involving the super key), windows (controlled by the freerdp instance in focus) registered a keypress as well. This event combined with the loss of focus got the super key stuck in windows indefinitely: the press of the keys d and r would first show my desktop, then open the run dialog (as if I was pressing the windows key constantly). I've tried several versions of freerdp, but all exhibited this annoying behavior. So I resorted to patching freerdp myself to just ignore the left super key on my keyboard. I love free software for a lot of reasons (especially the ability to alter things like this myself), however I still find it annoying to patch and rebuild freerdp on all version (and dependency) changes. How do you deal with situations like this? Is there even a "right way" to resolve this issue?

    Read the article

  • How to diagnose issue between mobo, RAID, and SSD cache drive? [migrated]

    - by goober
    Background This issue is happening on my custom-built desktop. Relevant specs: Motherboard: ASUS P8Z68-V PRO Utilizing Intel RST technology (application that uses unused SSD as cache) Processor: Intel core i7-2600k (not overclocked) HDDs: RAID1 of 2x Seagate Barracuda 1TB (ST31000524AS) (RAID performed via z68 chipset) Machine has run fine for ~1 year with no issues, and has been well-maintained (dust, etc.) What Happened Random Freezing issues -- intermittent Looked at the RST application screen to see that the acceleration cache was listed as "unavailable" -- recommended that I power down and reconnect the drive. Reconnected the drive to no avail. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Now, the freeze happens whenever loading something particularly data-driven (a video, a game, etc.) Steps Attempted Reconnected the drive to no avail. Updated Intel RST software to v. 11.6.0.1030 to see if that made a difference. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Connected the drive as its own volume. Formatted it, ran disk check errors -- all seems fine. Reconnected the drive and selected it again as the cache drive. Now, what happens when there is a freeze: Machine freezes I am unable to perform any command Screen then goes black I hit the reset button During boot, all drives show as "Disabled" and I am told no volume can be found I then hit the reset button (or power off/on) again. Either the next time (or sometimes after repeating this once more), the metadata cache is reconstructed and the system boots fine, showing the SSD as a cache. Question I believe this is an issue with the SSD itself, but how can I be sure since connecting it separately appeared to show no problems? I want to make sure it's not an issue with the motherboard, SATA ports, etc.

    Read the article

  • What is my BaseDN supposed to be with the following configuration of OpenLDAP?

    - by fuzzy lollipop
    I have the following in my OpenLDAP configuration. Using the latest version OpenLDAP on Centos 5.3. Installed using yum. From my /etc/openldap/slapd.conf database bdb suffix "dc=company,dc=com" rootdn "cn=Manager,dc=company,dc=com" From my /etc/openldap/ldap.conf BASE dc=company,dc=com I have successfully added an entry with ldapadd and retrieved it with ldapsearch from a local bash shell on the box. Now I am trying to get a Graphical Editor to connect to this server remotely so I can enter people from my laptop. But I am having no luck. I tried JXplorer, and it connects with Anonymous bind without me having to specify a BaseDN but I can't edit anything that way. If I try and give it a user name and password, using Manager and my rootpw I have in clear text just for testing, every GUI Client on my remote laptop complains about my BaseDN not being the correct format when I enter dc=company,dc=com and I tried cn=Manager,dc=company,dc=com. Error opening connection: [LDAP: error code 34 - invalid DN] I have tried multiple clients and all of them connect as anonymous, none let me connect authenticated where I can actually create or edit anything. I am using Manager as my username and the password from rootpw, is that correct?

    Read the article

< Previous Page | 142 143 144 145 146 147 148 149 150 151 152 153  | Next Page >