Search Results

Search found 24609 results on 985 pages for 'private ip'.

Page 148/985 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

  • Default gateway is in different subnet. How to configure in RHEL6.2

    - by Dmytro Leonenko
    I have two subnets routed to my server from ISP. I have only one gateway ip. The gateway is on the same VLAN as my IP address. For example netowrk 1 is 1.0.0.0/24 and network 2 is 2.0.0.0/24. Both are routed to eth0 by my ISP. Gateway is 1.0.0.1. My host ip is 2.0.0.1/24 (eth0) So I can configure default gateway manually with ip route add default dev eth0 ip route add default via 1.0.0.1 and then internet connection works properly. How do I configure it in /etc/sysconfig/network-scripts/ifcfg-eth0 ? I tried to set GATEWAY=1.0.0.1 but it doesn't work. Tried to set GATEWAY and GATEWAYDEV in /etc/sysconfig/network and it does only what first command from listing above do.

    Read the article

  • DHCP for Multiple Subnets

    - by TheD
    So this is the current setup - essentially I would like to get my DHCP server, serving DHCP requests for two seperate subnets. Netgear DG834G acting as a modem connected to a Sonicwall Pro 2040. X0 - LAN - 192.168.1.0/24 X1 - WAN - <WAN-IP> X2 - WLAN - 192.168.10.0/24 At the moment, I have a 2008R2 server with DHCP installed, with an IP address on the 192.168.1.0/24 range handling DHCP fine for this subnet. The Sonicwall is configured correctly - anything connected to the WLAN has Full Allow to anything in the LAN, and vice versa but it will not lease an IP from my Server. I've also added another IP address to the server, so the physical NIC now has two IP's: 192.168.1.2 and 192.168.10.2 with a DHCP scope configured for each. Still no luck! Any ideas? Thanks!

    Read the article

  • Model View Control Issue: Null Pointer Initialization Question [closed]

    - by David Dimalanta
    Good morning again. This is David. Please, I need an urgent help regarding control model view where I making a code that uniquely separating into groups: An Activity Java Class to Display the Interface A View and Function Java Class for Drawing Cards and Display it on the Activity Class The problem is that the result returns a Null Pointer Exception. I have initialize for the ID for Text View and Image View. Under this class "draw_deck.java". Please help me. Here's my code for draw_deck.java: package com.bodapps.inbetween.model; import android.content.Context; import android.view.View; import android.widget.ImageView; import android.widget.TextView; import com.bodapps.inbetween.R; public class draw_deck extends View { public TextView count_label; public ImageView draw_card; private int count; public draw_deck(Context context) { super(context); // TODO Auto-generated constructor stub //I have initialized two widgets for ID. I still don't get it why I got forced closed by Null Pointer Exception thing. draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); } public void draw(int s, int c, String strSuit, String strValue, Pile pile, Context context) { //super(context); //Just printing the card drawn from pile int suit, value = 1; draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); count_label = (TextView) findViewById(R.id.Text_View_Count_Card); Card card; if(!pile.isEmpty()) //Setting it to IF statement displays the card one by one. { card = pile.drawFromPile(); //Need to check first if card is null. if (card != null) { //draws an extra if (card != null) { //Get suit of card to print out. suit = card.getSuit(); switch (suit) { case CardInfo.DIAMOND: strSuit = "DIAMOND"; s=0; break; case CardInfo.HEART: strSuit = "HEART"; s=1; break; case CardInfo.SPADE: strSuit = "SPADE"; s=2; break; case CardInfo.CLUB: strSuit = "CLUB"; s=3; break; } //Get value of card to print out. value = card.getValue(); switch (value) { case CardInfo.ACE: strValue = "ACE"; c=0; break; case CardInfo.TWO: c=1; break; case CardInfo.THREE: strValue = "THREE"; c=2; break; case CardInfo.FOUR: strValue = "FOUR"; c=3; break; case CardInfo.FIVE: strValue = "FIVE"; c=4; break; case CardInfo.SIX: strValue = "SIX"; c=4; break; case CardInfo.SEVEN: strValue = "SEVEN"; c=4; break; case CardInfo.EIGHT: strValue = "EIGHT"; c=4; break; case CardInfo.NINE: strValue = "NINE"; c=4; break; case CardInfo.TEN: strValue = "TEN"; c=4; break; case CardInfo.JACK: strValue = "JACK"; c=4; break; case CardInfo.QUEEN: strValue = "QUEEN"; c=4; break; case CardInfo.KING: strValue = "KING"; c=4; break; } } } }// //Below two lines of code, this is where issued the Null Pointer Exception. draw_card.setImageResource(deck[s][c]); count_label.setText(new StringBuilder(strValue).append(" of ").append(strSuit).append(String.valueOf(" " + count++)).toString()); } //Choice of Suits in a Deck public Integer[][] deck = { //Array Group 1 is [0][0] (No. of Cards: 4 - DIAMOND) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 2 is [1][0] (No. of Cards: 4 - HEART) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 3 is [2][0] (No. of Cards: 4 - SPADE) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, //Array Group 4 is [3][0] (No. of Cards: 4 - CLUB) { R.drawable.card_dummy_1, R.drawable.card_dummy_2, R.drawable.card_dummy_4, R.drawable.card_dummy_5, R.drawable.card_dummy_3 }, }; } And this one of the activity class, Player_Mode_2.java: package com.bodapps.inbetween; import java.util.Random; import android.app.Activity; import android.app.Dialog; import android.content.Context; import android.os.Bundle; import android.view.View; import android.view.View.OnClickListener; import android.widget.Button; import android.widget.EditText; import android.widget.ImageView; import android.widget.TextView; import android.widget.Toast; import com.bodapps.inbetween.model.Card; import com.bodapps.inbetween.model.Pile; import com.bodapps.inbetween.model.draw_deck; /* * * Public class for Two-Player mode. * */ public class Player_Mode_2 extends Activity { //Image Views private ImageView draw_card; private ImageView player_1; private ImageView player_2; private ImageView icon; //Buttons private Button set_deck; //Edit Texts private EditText enter_no_of_decks; //text Views private TextView count_label; //Integer Data Types private int no_of_cards, count; private int card_multiplier; //Contexts final Context context = this; //Pile Model public Pile pile; //Card Model public Card card; //create View @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.play_2_player_mode); //-----[ Search for Views ]----- //Initialize for Image View draw_card = (ImageView) findViewById(R.id.IV_Draw_Card); player_1 = (ImageView) findViewById(R.id.IV_Player_1_Card); player_2 = (ImageView) findViewById(R.id.IV_Player_2_Card); //Initialize for Text view or Label count_label = (TextView) findViewById(R.id.Text_View_Count_Card); //-----[ Adding Values ]----- //Integer Values count = 0; no_of_cards = 0; //-----[ Adding Dialog ]----- //Initializing Dialog final Dialog deck_dialog = new Dialog(context); deck_dialog.setContentView(R.layout.dialog); deck_dialog.setTitle("Deck Dialog"); //-----[ Initializing Views for Dialog's Contents ]----- //Initialize for Edit Text enter_no_of_decks = (EditText) deck_dialog.findViewById(R.id.Edit_Text_Set_Number_of_Decks); //Initialize for Button set_deck = (Button) deck_dialog.findViewById(R.id.Button_Deck); //-----[ Setting onClickListener() ]----- //Set Event Listener for Image view draw_card.setOnClickListener(new Draw_Card_Model()); //Set Event Listener for Setting the Deck set_deck.setOnClickListener(new OnClickListener() { public void onClick(View v) { if(card_multiplier <= 8) { //Use "Integer.parseInt()" method to instantly convert from String to int value. card_multiplier = Integer.parseInt(enter_no_of_decks.getText().toString()); //Shuffling cards... pile = new Pile(card_multiplier); //Multiply no. of decks //Dismiss or close the dialog. deck_dialog.dismiss(); } else { Toast.makeText(getApplicationContext(), "Please choose a number from 1 to 8.", Toast.LENGTH_SHORT).show(); } } }); //Show dialog. deck_dialog.show(); } //Shuffling the Array public void Shuffle_Cards(Integer[][] Shuffle_Deck) { Random random = new Random(); for(int i = Shuffle_Deck[no_of_cards].length - 1; i >=0; i--) { int Index = random.nextInt(i + 1); //Simple Swapping Integer swap = Shuffle_Deck[card_multiplier-1][Index]; Shuffle_Deck[card_multiplier-1][Index] = Shuffle_Deck[card_multiplier-1][i]; Shuffle_Deck[card_multiplier-1][i] = swap; } } //Private Class for Random Card Draw private class Draw_Card_Model implements OnClickListener { public void onClick(View v) { //Just printing the card drawn from pile int suit = 0, value = 0; String strSuit = "", strValue = ""; draw_deck draw = new draw_deck(context); //This line is where issued the Null Pointer Exception. if (count == card_multiplier*52) { // A message shows up when all cards are draw out. Toast.makeText(getApplicationContext(), "All cards have been used up.", Toast.LENGTH_SHORT).show(); draw_card.setEnabled(false); } else { draw.draw(suit, value, strSuit, strValue, pile, context); count_label.setText(count); //This is where I got force closed error, although "int count" have initialized the number. This was supposed to accept in the setText() method. count++; } } } } Take note that the issues on Null Pointer Exception is the Image View and the Edit Text. I got to test it. Thanks. If you have any info about my question, let me know it frankly.

    Read the article

  • Ping Access to a Nested VM !! Plz Help

    - by Shivaramakrishnan
    I have a problem in communication between the host and the nested VM.This is my layout. I have installed KVM on host machine having a single nic interface (public ip) running Ubuntu.On top of this,I have VM running Ubuntu.I have installed KVM in this VM too.I then have a VM inside this running a web server. I am able to ping the host from this web server VM and ssh into it.But from host to VM ,ping is being unsuccessful. The VM (named L1hyp) on host was created using libvirt-manager and has IP of 192.168.122.8. The vswitch interface created at host is in default config (NAT-ed). Its IP is 192.168.122.1. Now this VM is also having a vswitch interface which is in default config (NAT-ed).Its IP is 192.168.100.1. The Web server VM is created on top of this L1hyp VM, is having an IP of 192.168.100.186. The Webserver VM uses 192.168.100.1 as its default gw. The L1hyp uses 192.168.122.1 as its default gw. From Host: ping 192.168.122.8 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS ping 192.168.100.1 - SUCCEEDS ping 192.168.100.186 - FAILS Comes up with Destination Host Unreachable From 192.168.122.1. But there is route to 192.168.100.0/24 subnet from host.Ping to 192.168.100.1 succeeds. From Webserver VM: ping 192.168.100.1 - SUCCEEDS ping 192.168.122.1 - SUCCEEDS SSH from web server VM to host succeeds. Can anyone help me out what needs to be modified to have two way communication between the host and Webserver VM at the earliest? I am pondering over this problem for over a week now.

    Read the article

  • Design for object with optional and modifiable attributtes?

    - by Ikuzen
    I've been using the Builder pattern to create objects with a large number of attributes, where most of them are optional. But up until now, I've defined them as final, as recommended by Joshua Block and other authors, and haven't needed to change their values. I am wondering what should I do though if I need a class with a substantial number of optional but non-final (mutable) attributes? My Builder pattern code looks like this: public class Example { //All possible parameters (optional or not) private final int param1; private final int param2; //Builder class public static class Builder { private final int param1; //Required parameters private int param2 = 0; //Optional parameters - initialized to default //Builder constructor public Builder (int param1) { this.param1 = param1; } //Setter-like methods for optional parameters public Builder param2(int value) { param2 = value; return this; } //build() method public Example build() { return new Example(this); } } //Private constructor private Example(Builder builder) { param1 = builder.param1; param2 = builder.param2; } } Can I just remove the final keyword from the declaration to be able to access the attributes externally (through normal setters, for example)? Or is there a creational pattern that allows optional but non-final attributes that would be better suited in this case?

    Read the article

  • Spring + JSR 303 Validation group is ignored [closed]

    - by nsideras
    we have a simple bean with JSR annotations public class CustomerDTO { private static final long serialVersionUID = 1L; private Integer id; @NotEmpty(message = "{customer.firstname.empty}") private String firstName; @NotEmpty(message = "{customer.lastname.empty}") private String lastName; @NotEmpty(groups={PasswordChange.class}, message="{password.empty}") private String password; @NotEmpty(groups={PasswordChange.class}, message="{confirmation.password.empty}") private String password2; } and we have a Spring Controller @RequestMapping(value="/changePassword", method = RequestMethod.POST) public String changePassword(@Validated({ PasswordChange.class }) @ModelAttribute("customerdto") CustomerDTO customerDTO, BindingResult result, Locale locale) { logger.debug("Change Password was submitted with information: " + customerDTO.toString()); try { passwordStrengthPolicy.checkPasswordStrength(locale, customerDTO.getPassword()); if (result.hasErrors()) { return "changePassword"; } logger.debug("Calling customer service changePassword: " + customerDTO); customerOnlineNewService.changePassword(customerDTO); } catch (PasswordNotChangedException e) { logger.error("Could not change password PasswordNotChangedException: " + customerDTO.toString()); return "changePassword"; } catch (PasswordNotSecureException e) { return "changePassword"; } return createRedirectViewPath("changePassword"); } Our problem is that when changePassword is invoked the validator ignores the group(PasswordChange.class) and validates only firstName and lastName which are not in the group. Any idea? Thank you very much for your time.

    Read the article

  • Connecting to VPN / proxy with different port number

    - by user779159
    I have an IP address, port, username, and password for one of those VPN / proxy services that allows you to use an IP address other than what your ISP gives you, but in the 'Edit Connections VPN' GUI I don't see where to enter a port. I enter the IP address under 'Gateway' and the username and password where it asks for it, but it doesn't work. I try to enter it with the IP address ending with a colon, followed by the port, but that doesn't work either (e.g. "1.1.1.1:9999"). Any idea how I could make it work? I'm using Ubuntu 12.04 LTS. Thanks.

    Read the article

  • iptables question

    - by RubyFreak
    i have a small network, with one valid IP and a firewall with 3 network interfaces (LAN, WAN, DMZ). I want to enable PAT on this valid IP to redirect http traffic to a server in my DMZ. (done) I want to enable MASQ on this ip from traffic that comes from my LAN (done) I want from my LAN as well to access my http server at DMZ. (partially) Question: in the above scenario, i cannot from my LAN, to access my http server in the DMZ, since it has the IP used by the MASQ (the only valid ip that i have). What would be the best option to solve this problem? network interfaces: eth0 (WAN) eth1 (DMZ) eth2 (LAN) /sbin/iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE /sbin/iptables -A FORWARD --o eth1 -d 2.2.2.2 -p tcp --dport 80 -j ACCEPT /sbin/iptables -t nat -A PREROUTING -i eth0 -d 1.1.1.1 -p tcp --dport 80 -j DNAT --to 2.2.2.2 /sbin/iptables -A FORWARD -i eth0 -o eth1 -m state --state RELATED,ESTABLISHED -j ACCEPT /sbin/iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT /sbin/iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT

    Read the article

  • ARP replies contain wrong MAC address

    - by Jayen
    I've got a robot running linux with wired and wireless adapters. When I boot up, it connects to the wireless fine. When I assign an IP to the wired (either statically or with DHCP), it looks like it works. As in, ifconfig shows a proper IP and route shows proper routes. However, when I do an ARP request of the wired IP, the ARP reply contains the wireless MAC. ??? There's no bridge running on the robot, so why don't I get the wired MAC??? When the wire is disconnected, the wired IP replies to ping... Why is the robot replying over the wireless interface to IP requests on the wired???

    Read the article

  • Android - Efficient way to draw tiles in OpenGL ES

    - by Maecky
    Hi, I am trying to write efficient code to render a tile based map in android. I load for each tile the corresponding bitmap (just one time) and then create the according tiles. I have designed a class to do this: public class VertexQuad { private float[] mCoordArr; private float[] mColArr; private float[] mTexCoordArr; private int mTextureName; private static short mCounter = 0; private short mIndex; As you can see, each tile has it's x,y location, a color array, texture coordinates and a texture name. Now, I want to render all my created tiles. To reduce the openGL api calls (I read somewhere that the state changes are costly and therefore I want to keep them to a minimum), I first want to hand ALL the coordinate-arrays, color-arrays and texture-coordinates over to OpenGL. After that I run two for loops. The first one iterates over the textures and binds the texture. The second for loop iterates over all Tiles and puts all tiles with the corresponding texture into an IndexBuffer. After the second for loop has finished, I call gl.gl_drawElements() whith the corresponding index buffer, to draw all tiles with the texture associated. For the next texture I do the same again. Now I run into some problems: Allocating and filling the FloatBuffers at the start of each rendering cycle costs very much time. I just run a test, where i wanted to put 400 coordinates into a FloatBuffer which took me about 200ms. My questions now are: Is there a better way, handling the coordinate and color structures? How is this correctly done, this is obviously not the optimal way? ;) thanks in advance, regards Markus

    Read the article

  • Network interface selection

    - by Antonino
    Hello. Suppose I have more than a network interfaces and I want to selectively use them per application. eth0 is the standard interface with the standard gateway in the main routing table eth1 is another interface with a different gateway. Suppose I launch an application as a user "user_eth1". I used the following set of rules for iptables / ip rules. IPTABLES: iptables -t mangle -A OUTPUT -m user --uid-owner user_eth1 -j MARK --set-mark 100 iptables -t nat -A POSTROUTING -m user -uid-owner -o eth1 user_eth1 -j SNAT --to-source <eth_ipaddress> IPRULE: ip rule add fwmark 100 lookup table100 and i build "table100" as follows (no doubts on that) ip route show table main | grep -Ev ^default | while read ROUTE; do ip route add table table100 $ROUTE; done ip route add default via <default_gateway> table table100 It doesn't work at all. What's wrong with this? Thank you in advance!

    Read the article

  • Cross-Forest Trust

    - by cdalley
    I am looking at testing a cross-domain trust we can have two domain controllers (with different forests and domain names) setup so we can move everyone onto the new domain. We do NOT run exchange on site and we do not have any links to O365 to AD currently. Onto the problem: I have setup two DCs in a Virtual Machine: They are on the same network 192.168.0.* The Windows 2003 server: Name: OLDSRVR "Clone" of our current Domain Controller IP: 192.168.0.1 Domain: internal.test.com The Windows 2012 server: Name: ADCTEST01 Brand new domain setup from scratch separate to internal.test.com Domain: internal.test2.com IP: 192.168.0.2 OLDSRVR can only see ADCTEST if it has dynamic IP set. If I set a static IP it cannot see it. If I try using the dynamic IP and try to join it gets to the end then complains "??The trust relationship between this workstation and the primary domain failed" Any ideas?

    Read the article

  • LibGdx, Texture an Object

    - by Gigi10012
    I want to set texture to an Object, this is my playerobject class: private boolean up; private float speed; private float fallacceleration = 20; private float acceleration = 15; private float maxSpeed = 300; SpriteBatch batch; public Player() { x = MyGdxGame.WIDTH - 9*MyGdxGame.WIDTH/10; y = MyGdxGame.HEIGHT - 3 * MyGdxGame.HEIGHT/10; shapex = new float[4]; shapey = new float[4]; radians = 2*MathUtils.PI; batch = new SpriteBatch(); } private void setShape() { //Simple Arrow Shape ...... } public void update(float dt) { setShape(); } public void draw(ShapeRenderer sr) { sr.setColor(0F, 0F, 0F, 1F); sr.begin(ShapeType.Line); //Drawing Shape .............. sr.end(); } What I have to do to add texture to that object? (I'm using LibGdx)

    Read the article

  • Redirect public traffic to a different subfolder, while local traffic remains unchanged

    - by ecnepsnai
    I would like to have local (intranet) HTTP traffic go to the /var/www/html folder while any public traffic goes to the subfolder, /var/www/html/public I've tried this configuration, with some variation, in httpd.conf <VirtualHost PRIVATE-IP> DocumentRoot /var/www/html ServerName ecn ErrorLog /var/www/logs/error/private CustomLog /var/www/logs/access/private common </VirtualHost> <VirtualHost PUBLIC-IP> DocumentRoot /var/www/html/public ServerName PUBLIC-DOMAIN-NAME ErrorLog /var/www/logs/error/public CustomLog /var/www/logs/access/public common </VirtualHost> PUBLIC-IP, PRIVATE-IP, and PUBLIC-DOMAIN name are all replaced with the correct values in the actual document. The problem is, local traffic can browse fine but remote traffic is directed to the root folder and getting 403d (because I have that folder blocked off through my .htaccess file). If I append /public to the URL it works fine.

    Read the article

  • Application to organize / manage installed networks

    - by vicmp3
    I was wondering if there is a Application where you can organize networks. I mean if you have installed some networks you have to note every pc's name, his ip-address and so on. Is there a Application where you can manage it? I saw the monitoring tools but that is not exactly what I'm looking for. Maybe I didnt explain me well, after all my englis his not so good :) For example if I install many different networks I write in a book how I configured them. I write pc-name ip-address ip-gateway ip-broadcast and so on for each network. It will be great if I can do it in a program to organize it well, and for example it gives me a node view of the network.

    Read the article

  • Route eth0 to internet traffic and eth1 to local traffic

    - by Romain Caire
    How can I route all my internet traffic on eth0 (everything except 192.168.1.0/24) and route my local traffic through eth1 (192.168.1.0)? Here is my attempt : # Flush ALL THE THINGS. ip route flush table main # Restore the main table. I flushed it because OpenVPN does weird things to it. ip route add 127.0.0.0/8 via 127.0.0.1 dev lo ip route add 0.0.0.0/0 via 164.67.195.1 ip route add 192.168.1.0/24 via 192.168.1.1 ip route flush cache

    Read the article

  • Can connect to WAN via PC but router doesnt.

    - by user16877
    I have a very strange problem regarding the office network. We are currenltly in a executive suite and when i connect to wan via ethernet cable i get dhcp assigned IP address in my network config. I hooked up the linksys router to the wall expecting it to receive all the necessary ip info but that didnt work. So we have been assigned static ip address to put in to our router later but even with the static ip router doesnt seem to connect to internet. But using the same ip address and assigning to laptop works. I m very puzzled what might be the cause of this so any help is really appreciated.

    Read the article

  • How to connect two subnet with Windows Server?

    - by 9dan
    Hello, I have some work to do in a small office. This office has two separate Internet connections. One is a kind of DSL line and connected through the Internet sharing router (DHCP). One is a leased line with public IP adresses (No DHCP). This leased line provide only 30 IP addresses and the gateway is provided by the ISP. Some workers use private IP provided by the router, some workers use manually setup public IP. There is a Windows 2008 R2 server with two NICs, connected to each lines. I want to connect/merge(?)/bridge(?) two subnet with this server so that users from the different subnet can access each other. How can I accomplish this? Something like, add gateway function to this server and public IP users change the gateway to point this server.. It it possible ? Sorry for my rambling. Thanks in advance.

    Read the article

  • Routing between two VLANs on Single Dell 6200 Switch

    - by jenglee
    I want to be able to route between two vlans that I have created and I am not sure how to go about it. So I have created, VLAN 5 with IP Address 192.168.5.1/24 and VLAN 10 with IP Address 192.168.0.1/24 //main IP addresses that I use. How would I be able to get (for example) the IP Address 192.168.0.144 to see any ip addresses in 192.168.5.1/24? Also do you have to set a default gateway for each VLAN or do you set the default gateway for the switch.

    Read the article

  • Routing using Linux with 2 NIC cards

    - by Kevin Parker
    Configured Clear OS to be in Gateway mode on a machine with two NIC cards. eth0:192.168.2.0/24 with ip 192.168.2.27 which is connected to a modem and thus have internet connectivity. eth1:192.168.122.0/24 with ip 192.168.122.10 which is connected to other machines in LAN through switch. LAN machines with network 192.168.122.0 is not getting internet.How can they get internet Through Clear OS gateway.I have enabled packet forwarding in clear os using "ip_forward=1" What am i missing?.Can you please help me in this. Following are the static routing i have added: on LAN machine1 with ip address 192.168.122.11 ip route add 192.168.2.0/24 via 192.168.122.10 dev eth0 ip route show 192.168.2.0/24 via 192.168.122.10 dev eth0 192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.11 But still 192.168.2.0/24 network is not reachable.Where can be the problem??

    Read the article

  • How two use 2 subnets on one network

    - by BGuy2010
    I have some servers at a colocation. They've given us an IP range,subnet,and gateway. Now we have run out of IP's and they've given us a new range of IP's but with a different subnet and gateway. We have a Juniper NetScreen firewall and a load balancer, and I am not sure how to proceed in order to be able to use these new IPS that are on a different subnet. Do I need to setup a new VLAN? on our firewall? I tried adding one of the new IP's on one of our servers, with the new subnet and gateway. I could ping the alternate gateway, but could not ping the assigned IP from outside or from inside.

    Read the article

  • Can Ping but Cannot Telnet directly to SQL Server 2012 Cluster Nodes

    - by tresstylez
    We have a monitoring tool (Solarwinds Orion) that needs to connect to a 2-node failover SQL Server Cluster. For reasons outside of our control -- we cannot monitor the CLUSTER IP directly at this time, so we have fallen back to monitoring each cluster node IP directly. This is not working. Upon troubleshooting, we tried to test that the cluster node was listening on the proper (fixed) port by using telnet to the cluster node IP/port -- and the telnet failed. However, telnet'ing to the Cluster IP/Port was SUCCESSFUL! Each node has its own IP. Each node is listening on the identical FIXED port. Each node has Dynamic Ports disabled. Each node can be PINGED successfully from the monitoring tool. Windows Firewall is DISABLED. How can I troubleshoot why I cannot telnet to the listening port on the cluster nodes?

    Read the article

  • DNS Help: Move domain, not mailserver

    - by Preserved
    I'm in the middle of launching a new website for an already-in-use domain. The domain has a complicated email system so we'd like to move that over to the new server a bit later on. Currently the domain DNS is managed by the current webhost. I plan on moving the DNS management back to Network Solutions, then point the A record to the new website's IP. However, currently the DNS has the MX record the same as the A record. When NetworkSolutions is managing the DNS, and I point the A record to the new IP, then the MX record can't be the A record.. Right now: A Record mydomain.com points to IP address 198.198.198.198 MX record mydomain.com points to IP address 198.198.198.198 What I want: A Record mydomain.com points to IP address of new server MX record somehow points to current existing mailserver Does this even make sense?

    Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >