Search Results

Search found 109076 results on 4364 pages for 'ubuntu server edition'.

Page 148/4364 | < Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >

• Connect to Nonencrypted Wireless Network Using Ubuntu Commands

  - by Tim

  I failed to connect to an open i.e. nonencrypted wireless network using Ubuntu command lines. Here is what I did: $ sudo /etc/init.d/NetworkManager stop * Stopping network connection manager NetworkManager [ OK ] $ sudo /sbin/ifconfig wlan0 up $ sudo iwconfig wlan0 essid "Cavalier High-Speed 866-4-CAVTEL" $ sudo dhclient wlan0 There is already a pid file /var/run/dhclient.pid with pid 10812 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ wmaster0: unknown hardware address type 801 wmaster0: unknown hardware address type 801 Listening on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on LPF/wlan0/00:0e:9b:cd:4e:18 Sending on Socket/fallback DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPREQUEST of 192.168.1.67 on wlan0 to 255.255.255.255 port 67 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 21 DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. Trying recorded lease 192.168.1.67 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Trying recorded lease 192.168.1.45 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. --- 192.168.1.1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms No working leases in persistent database - sleeping. $ sudo /sbin/iwconfig wlan0 wlan0 IEEE 802.11bg Mode:Managed Frequency:2.422 GHz Access Point: Not-Associated Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2352 B Encryption key:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 I was wondering what the problem is and how I can do it right? Thanks and regards!

  Read the article

• SeLinux blocking connection to sshd on Ubuntu 9.10

  - by Barton Chittenden

  When I try to log on to my laptop, which runs Ubuntu 9.10, the server rejects my login attempts. Checking /var/log/auth.log, I see the following: Feb 14 12:41:16 tiger-laptop sshd[6798]: error: ssh_selinux_getctxbyname: Failed to get default SELinux security context for tiger I googled for this, and ran across the following: http://www.spinics.net/lists/fedora-.../msg13049.html Here's the part that I think relates to the problem that I'm having: Quote: What's wrong on my system? Why it's not possible to login even if selinux is in permissive mode? Any suggestions? I'd start by trying to figure out why sshd isn't running in sshd_t (it seems to be running in sysadm_t). Paul. selinux mailing list selinux@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mail...stinfo/selinux Yes, sshd is running in sysadm_t: ps axZ | grep sshd system_u:system_r:sysadm_t 3632 ? Ss 0:00 /usr/sbin/sshd -o PidFile=/var/run/sshd.init.pi ls -Z /usr/sbin/sshd system_ubject_r:sshd_exec_t /usr/sbin/sshd Don't know why it's not sshd_t. I didn't modified something. It's a standard installation of sles11 with the default reference policy from tresys. Maybe this code snippet from policy/modules/services/ssh.te is responsible for that: Allow ssh logins as sysadm_r:sysadm_t gen_tunable(ssh_sysadm_login, true) Any ideas? Do you have boolean init_upstart set to on? if not try setting it to on. I do not believe ssh_sysadm_login boolean works currently but i may be mistaken. -- Yeah, setting init_upstart to on did the trick! THANK A LOT! Do you know why this prevents the user from logging in through ssh even if selinux is set to permissive?? Ok, so the million dollar question is "where do I set 'init_upstart=1'"? It's not clear from context which configuration file needs to be edited, and I'm not at all familiar with SELinux configuration.

  Read the article

• System Slow After Uprading Ubuntu

  - by Aragon N

  I have an Ubuntu network machine which has release of 10.04.1 LTS Lucid. On this system I have Apache, PostgreSQL and django. For some app. development I have to install PGP and php-curl. Due to being on network, I have exported a VMware machine to the Internet and firstly I have upgraded the system and then installed php5 packages on it. I don't know is it all about django or apache configuration. Maybe some Apache settings had changed. In this case in apache where I have to look at ? After all replacing it with its old place, I see that the new system query is slow according to another. Old system query time : 140 ms New system query time : 9.11 s I have checked /etc/network interface and it seems there is no problem. I have checked /etc/resolv.conf and it seems OK I have checked /etc/nsswitch.conf and only host section is different from old one which old system has hosts: files mdns4_minimal [NOTFOUND=return] dns mdns4 and then I have checked time host -t A services.myapp.com and I got real 0m0.355s user 0m0.010s sys 0m0.020s and I have checked apache2 HostnameLookups : find /etc/apache2/ -type f | xargs grep -i HostnameLookups It returned : /etc/apache2/apache2.conf:# HostnameLookups: Log the names of clients or just their IP addresses /etc/apache2/apache2.conf:HostnameLookups Off and now what can I have to check for boosting my system as before?

  Read the article

• Simple Voip server for ubuntu

  - by Stalkerh

  I have a network that connects 2 households and would like to setup a simple voip server so that I can call between the houses. It needs to be for ubnutu , I have used the free 3CX system and while it works brilliantly it doesnt support linux and I can get a windows box. The users will never need to call external lines. They will only make 'calls' between laptops/pc. Can someone please make a recommendation and maybe even a tutorial that I can follow

  Read the article

• Server memory issues, and expected level of service from hosting company

  - by Greg

  I'm involved in maintaining an Ubuntu VPS which runs our django websites (nginx/apache/mod_wsgi) and we've been having some memory spikes which have either caused the database to die, or induced kernel panic when the memory management system can't find any killable processes. I'm working on fixing the memory spikes, but I'm wondering whether there's anything I can do to better deal with the problem if it occurs again. Are there any tools I could use to detect the memory spikes and then, say, kill the offending process and email the server admin to fix it up? Killing off one website so that the server can remain operational is certainly preferable to the whole thing falling over. Also, we were charged $600 for after-hours service because we had to get the hosting company to restart the server - is this standard practice among hosting companies? Another provider I work with provides a panel with which I can stop and start the server myself, and given that a restart was all that was needed, $600 seems mightily excessive. (That's NZD, it's around $445 USD)

  Read the article

• Tracd + varnish ( + nginx) setup on ubuntu 10.10

  - by user66831

  I have a currently setup trac server in domain.tld/subdir which is being proxied via nginx, I setup varnish and passed trac directly and the difference was visible to the naked eye, so I was wondering if anyone has setup tracd + varnish or tracd + nginx + varnish and would share the configs or pointers on the setup. would appreciate it :) thank you. my varnish config : http://kingpin.pastebin.com/fRLmckTk

  Read the article

• Is it possible to dedicate the physical screen of a vmware server machine to a guest vm graphically?

  - by matnagel

  I have a vmware server 2.x running on ubuntu server (8.04). So the graphics card and the screen of the physical box are unused (I log in remotely and the host os has only the cli console installed). I wonder if it is possible to assign this graphics card to a virtual machine directly and use it for the gui of this guest? Or maybe if I add a second graphics card to the machine?

  Read the article

• Setup: Eclipse in Ubuntu with Apache2 and Subversion

  - by Ricalsin

  Trying to setup Eclispe. I am running ubuntu 10.10 (Maverick). Apache2.2.16 Subversion 1.6.12 The Eclipse help/about/installed software says: Eclipse Platform 3.5.2 Subclipse 1.0.0 Version Control with Subversion 1.1.1 The Subclips wiki I followed is here I have installed the libsvn-java app as discussed. I added the line "-Djava.library.path=/usr/lib/jni" to the eclipse.ini file I checked the Eclipse help/about/confirguration settings and both of these lines are listed: eclipse.vmargs=-Djava.library.path=/usr/lib/jni java.library.path=/usr/lib/jni I checked that those files are in those directories. Still, when I check the preferencesteamsvn an error dialog shows: Failed to load JavaHL Library. These are the errors that were encountered: no libsvnjavahl.1 in java.library.path Incompatible JavaHL library loaded 1.3.x or later required I followed the "Testing JavaHL libraries" troubleshooting section at the bottom of the wiki: I downloaded the tarbal and ran it in a folder on my desktop with no problems. Then, I followed the instructions and placed that file INSIDE the path (usr/lib/jni/testJavaHL) and ran it from there. There are 50 tests performed and each one of them came back with this same error (posting only one for brevity): 50) testCommitRevprops(org.tigris.subversion.javahl.BasicTests)java.io.FileNotFoundException: /usr/lib/jni/testJavaHL/local_tmp/greek_files/iota (No such file or directory) at java.io.FileOutputStream.open(Native Method) at java.io.FileOutputStream.<init>(FileOutputStream.java:209) at java.io.FileOutputStream.<init>(FileOutputStream.java:160) at org.tigris.subversion.javahl.WC.materialize(WC.java:70) at org.tigris.subversion.javahl.SVNTests.buildGreekFiles(SVNTests.java:303) at org.tigris.subversion.javahl.SVNTests.setUp(SVNTests.java:222) at org.tigris.subversion.javahl.RunTests.main(RunTests.java:111) FAILURES!!! Tests run: 50, Failures: 0, Errors: 50 Any ideas as to how/why the "local_tmp/greek_files/iota" is appended to the directory? I assume that's my problem.. I'm also having a problem with newrepository location = ...as the directory location of my svn repository is one level above the home directory - which is prepended to whatever I place in the dialog box - resulting in this error: svn: '/home/ricalsin/file:/home/svn' does not exist Thank you for any help.

  Read the article

• Ubuntu 10.04 bind9 local zone include files and apparmor

  - by Gilgongo

  Rather than putting all my zones in one named.conf.local file, I'd like to have them in groups that I can manage as separate files. So, I've tried putting the following into named.conf.local: include "/home/zones/group1.conf"; include "/home/zones/group2.conf"; include "/home/zones/group3.conf"; However, when I restart named, I see "permission denied" errors in the logs. Ubuntu uses apparmor for bind, so I also added the following in /etc/apparmor.d/usr.sbin.named: /home/zones/group1.conf r, /home/zones/group1.conf r, /home/zones/group1.conf r, Now, when I re-start named, all appears to be well. Zones are loaded (I think). However, a day or two later, I see my secondary name server complaining that the primary is telling it that it's not authoritative for those domains. I then have to put all the domains back into the named.conf.local file again. How can I get bind9 to use include files in this way? I don't know much about apparmor, so that may or may not be the issue here, but I've used include files in this way on Debian OK.

  Read the article

• Guide To Setting Accessing PhpMyAdmin On NGINX, Ubuntu 11.04, EC2 Remote MySQL Instance

  - by darkAsPitch

  I have setup a domain name to run on amazon ec2 running ubuntu 11.04, nginx and php5-fpm. The domain name works great, I have setup it's own sites-available configuration file and sym-linked it to sites-enabled. I installed phpmyadmin via sudo apt-get install phpmyadmin and followed the instructions. I then added this just above my /etc/nginx/nginx.conf file and restarted nginx. server { listen 80; server_name phpmyadmin.domain.com; location / { root /usr/share/phpmyadmin; index index.php; } #make sure all php files are processed by fast_cgi location ~ \.php { # try_files $uri =404; fastcgi_index index.php; fastcgi_pass 127.0.0.1:9000; include fastcgi_params; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_param PATH_INFO $fastcgi_path_info; fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; } } I have also added the appropriate dns A records for phpmyadmin.domain.com phpmyadmin.domain.com just shows a 404 error code. All other subdomains do not respond at all so at least something is working here. FYI I have edited the /etc/phpmyadmin/config.inc.php file so that I can connect to a remote MySQL Database. What else do I need to do?

  Read the article

• Is this distributed database server idea feasible?

  - by David

  I often use SQLite for creating simple programs in companies. The database is placed on a file server. This works fine as long as there are not more than about 50 users working towards the database concurrently (though depending on whether it is reads or writes). Once there are more than this, they will notice a slowdown if there are a lot of concurrent writing on the server as lots of time is spent on locks, and there is nothing like a cache as there is no database server. The advantage of not needing a database server is that the time to set up something like a company Wiki or similar can be reduced from several months to just days. It often takes several months because some IT-department needs to order the server and it needs to conform with the company policies and security rules and it needs to be placed on the outsourced server hosting facility, which screws up and places it in the wrong localtion etc. etc. Therefore, I thought of an idea to create a distributed database server. The process would be as follows: A user on a company computer edits something on a Wiki page (which uses this database as its backend), to do this he reads a file on the local harddisk stating the ip-address of the last desktop computer to be a database server. He then tries to contact this computer directly via TCP/IP. If it does not answer, then he will read a file on the file server stating the ip-address of the last desktop computer to be a database server. If this server does not answer either, his own desktop computer will become the database server and register its ip-address in the same file. The SQL update statement can then be executed, and other desktop computers can connect to his directly. The point with this architecture is that, the higher load, the better it will function, as each desktop computer will always know the ip-address of the database server. Also, using this setup, I believe that a database placed on a fileserver could serve hundreds of desktop computers instead of the current 50 or so. I also do not believe that the load on the single desktop computer, which has become database server will ever be noticable, as there will be no hard disk operations on this desktop, only on the file server. Is this idea feasible? Does it already exist? What kind of database could support such an architecture?

  Read the article

• High Availability Exchange 2010 Support on Server 2008 Standard?

  - by RSXAdmin

  I could not find an answer so I thought I'd ask here: Is Microsoft Exchange 2010 High Availability possible on Exchange 2010 Standard running on Server 2008 R2 Standard boxes? This is one of the features I like about Exchange 2010. My concern is that if it can be avoided the business does not necessarily need a Enterprise server license.

  Read the article

• Apache mod_proxy to another server

  - by trobrock

  I am using the proxy_balancer in Apache2 to proxy requests to a Rails application to my rails server on the port the application is running on. This is how its set up... Rails Server Mongrel running on port 8000, when accessing the url directly to http://rails_server:8000 the site loads fine Apache Server Conf file for the site: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName myserver.com ServerAlias application.myserver.com <Proxy balancer://application_cluster> Allow from localhost BalancerMember http://ip.to.server:8000 retry=10 </Proxy> ProxyPass / balancer://application_cluster </VirtualHost> The problem I am having is going to http://rails_server:8000 works fine, but going to http://application.myserver.com Loads the right content, but is displaying all the HTML as text and not rendering it as html

  Read the article

• mount.nfs: access denied by server while mounting (Kerberos authentication)

  - by Nick

  There's plenty of references to this error on Goggle, and even a question here with the same title, but it seems that "access denied by server while mounting" is a catch-all error. I've tried suggestions that others have used to fix this problem, but they did not work in my case. I'm trying to set-up a Kerberos-based NFS file server with shared homes for a Linux network. I'm using Ubuntu 11.04 Servers and clients. When trying to mount a share using: mount 192.168.1.115:/export/home/ /media/tmp I get: mount.nfs: access denied by server while mounting 192.168.1.115:/export/home/ This is the same if I mount it from a client machine or from the server itself. On the server, in /var/log/syslog I get: Aug 25 06:22:37 nfs mountd[1580]: authenticated mount request from 192.168.1.115:835 for /export/home (/export/home) Aug 25 06:22:37 nfs mountd[1580]: authenticated unmount request from 192.168.1.115:766 for /export/home (/export/home) Which is odd, since it says it's authenticated the request, not denying it. /etc/exports: /export *(rw,fsid=0,crossmnt,insecure,async,no_subtree_check,sec=krb5p:krb5i:krb5) /export/home *(rw,insecure,async,no_subtree_check,sec=krb5p:krb5i:krb5) On client: me@dt1:/$ rpcinfo -p 192.168.1.115 program vers proto port 100000 2 tcp 111 portmapper 100024 1 udp 37320 status 100024 1 tcp 48460 status 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 2 tcp 2049 100227 3 tcp 2049 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100227 2 udp 2049 100227 3 udp 2049 100021 1 udp 58625 nlockmgr 100021 3 udp 58625 nlockmgr 100021 4 udp 58625 nlockmgr 100021 1 tcp 49616 nlockmgr 100021 3 tcp 49616 nlockmgr 100021 4 tcp 49616 nlockmgr 100005 1 udp 45627 mountd 100005 1 tcp 60265 mountd 100005 2 udp 45627 mountd 100005 2 tcp 60265 mountd 100005 3 udp 45627 mountd 100005 3 tcp 60265 mountd Any suggestions I could try?

  Read the article

• Ubuntu 12.10 64bit host reboots when trying to install any guest system using VirtualBox

  - by gts123

  I am having a really nasty problem with VirtualBox as everytime I try to install any guest OS(using ISO file as CD for installation media), the installation starts normally but as soon as it is about to start either installing to virtual hard drive or loading(e.g. as LiveFS) it causes the host system to reboot abruptly. Config is as below: Host system: Ubuntu 12.10 64bit - Intel® Core i7-2640M CPU @ 2.80GHz × 4 Virtualbox version: 4.1.18_Ubuntu r78361 Guest OS systems tried: 32bit version of FreeBSD 9, Debian 6, Tails 0.14 VM setup Tried to have the minimal setup necessary just in case it would avoid for each system to make sure I'd avoid conflicts, but to no avail. I've tried different values and combinations of the below but the problem still persists: Shared Clipboard: Disabled Show in fullscreen/seamless: Disabled Remember runtime changes: DIsabled Base Memory: 2048 MB Chipset: PIIX3 IO APIC: Disabled EFI: Disabled Absolute Pointing device: Disabled Processor(s): 1 CPU PAE/NX: Disabled VT-x/AMD-V: Disabled Video Memory: 12 MB 3d/2d acceleration: Disabled Storage IDE COntroller: PIIX3 (same as chipset instead of PIIX4) Use host I/O cache: No Audio: disabled Network adapter: NAT USB controller: disabled No shared folder Also another sideeffect of the reboot is that it appears that it does not log any information in the error log files; not making things any easier. Please help.

  Read the article

• SQL server environment

  - by Olegas D

  Hello I'm considering a bit of changes in current sales environment. And trying to check all cons and pros. Current situation. SQL server (quite decent HP server - server1) + backup server (smaller Dell server - server2). all sql files and sql server itself are on the server1. If something goes wrong with server1 I will have to manually move to server2. Connecting to the sql server: 1 HQ (where server located) + 4 sites through VPN. Now I'm considering 2 scenarios: Buy some storage system + update existing servers (add ram, upgrade processors) and go for VMWare ESXI. Rent a server at a datacenter + rent virtual server in case real server goes down. Also rent some space at data storage to keep SQL files there. Have anyone considered these things and maybe found some good pros/cons list? ;) Thanks

  Read the article

• Configure static IPv6 on Ubuntu

  - by Charles Offenbacher

  I'm trying to configure IPv6 on a dedicated Ubuntu server. My provider gave me a "/64" (whatever that is - I'm still confused) of IPv6 addresses. However, when I try to use them, I can't ping anything. What do I do? :( # ping6 ipv6.google.com PING ipv6.google.com(vx-in-x63.1e100.net) 56 data bytes From fe80::219:d1ff:fefb:42d8 icmp_seq=1 Destination unreachable: Address unreachable From fe80::219:d1ff:fefb:42d8 icmp_seq=2 Destination unreachable: Address unreachable From fe80::219:d1ff:fefb:42d8 icmp_seq=3 Destination unreachable: Address unreachable --- ipv6.google.com ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2014ms # tracepath6 ipv6.google.com 1?: [LOCALHOST] 0.025ms pmtu 1500 1: fe80::219:d1ff:fefb:42d8%eth0 2000.022ms !H Resume: pmtu 1500 # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 64.***.***.*** netmask 255.255.255.248 gateway 64.***.***.*** iface eth0 inet6 static pre-up modprobe ipv6 address 2607:F878:1:***::1 netmask 64 gateway 2607:F878:1:***(same as address)::1 # ifconfig eth0 Link encap:Ethernet HWaddr 00:19:d1:fb:42:d8 inet addr:64.***.***.*** Bcast:64.***.***.*** Mask:255.255.255.248 inet6 addr: fe80::219:d1ff:fefb:42d8/64 Scope:Link inet6 addr: 2607:f878:1:***::1/64 Scope:Global UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52451 errors:0 dropped:0 overruns:0 frame:0 TX packets:39729 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6817761 (6.8 MB) TX bytes:6153835 (6.1 MB) Interrupt:41 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:166 errors:0 dropped:0 overruns:0 frame:0 TX packets:166 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:31714 (31.7 KB) TX bytes:31714 (31.7 KB)

  Read the article

• Adding Multiple Interfaces to EC2 Ubuntu 12.04

  - by nocode

  I have a m1.medium Ubuntu 12.04 instance with two ENI's. I have a VPC setup with a private and public subnet. Private: 10.50.1.0/24 Public: 10.50.101.0/24 I initiated the instance on the private subnet. I configured a NAT instance and route all servers in the private subnet internet access. The route tables on the private subnet point towards the NAT instance and the route table on the public subnet point to the internet gateway. I am trying to add a public interface on the machine so that I can put it behind a ELB. When I added the second ENI and configured a static IP in /etc/network/interfaces and restarted the network services, I can no longer access from the Public subnet to the Private Subnet. Works Private private Private public Does not work Public private From Public Private, I ran a TCPDUMp on the private machine and can see the request coming in. My guess is it's trying to route over the new Public interface instead of the Private. Here's my route: default 10.50.1.1 0.0.0.0 UG 100 0 0 eth0 10.50.1.0 * 255.255.255.0 U 0 0 0 eth0 10.50.101.0 * 255.255.255.0 U 0 0 0 eth1 My networking knowledge is limited and I believe I have to add some routes but unsure of what command/syntax needs to be.

  Read the article

• Adding file to /etc/cron.d doesn't make it run (ubuntu 10.04)

  - by tom

  If I scp a cron file into /etc/cron.d it doesn't run unless I edit the file and change the command. Then crond seems to pick up the cron file. How can I make cron reload its cron files in ubuntu 10.04? 'touch'ing the file doesn't work nor does 'restart cron' or 'reload cron'. My cron file is set to run every minute and logs to a file. Nothing ends up in the log file until I edit the command, and there's no entry for it in /var/log/syslog I'm stumped. Here's my cron file saved to /etc/cron.d/runscript # Runs the script every minute. This is safe because it will exit with success if it's already running * * * * * www-data if [ -f /usr/local/bin/thing ]; then exec /usr/bin/php /usr/local/bin/thing mode:prod -a 14 -d >> /var/log/thing/mything.log 2>&1; else echo `date +'[%D %T]'` "Thing not deployed. Command not run\n" >> /var/log/thing/mything.log; fi &

  Read the article

• ERROR : MySQL server has gone away while running query

  - by Rashmi Nama

  I am using ubuntu 12.04 version. I am connecting properly to MariaDB from command prompt,I have a database named Dealer and have some tables in it but when i running any query, it gives an error.My steps as follow: mysql -uroot -proot use dealer; select * from dealer_outlet limit 1; now error occours ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 3 Current database: dealer ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111 "Connection refused") ERROR: Can't connect to the server

  Read the article

• View changelog of all packages to be upgraded before upgrading

  - by Stein G. Strindhaug

  When using synaptic on my Ubuntu desktop computer i can review all changelog of all the packages to be upgraded, and unselect a package for upgrade if I want. On my desktop I usually install everything, but I like to at least review what the changes are so that I can delay the upgrade if I suspect it could cause problems with the development tools I use. On a server (Ubuntu Server) with no x-server how can I do the same thing on the console: list all packages that will be updated (apt-get --dry-run upgrade does this along with a lot of noisy simulated install messages), view the changelog (if any) from last upgrade to the version it will be upgraded to. select which packages I want to ignore, or which I want to upgrade I've searched a lot for this but I haven't found anything, possibly I'm not using the correct terminology; but surely this must be possible. Synaptic must get it's info from some some low-level tool I assume? Complicated shellscripts are welcome too, if this is not already easily done with the existing tools.

  Read the article

• How do I enable Ubuntu Gnome system tools

  - by RussellW

  I am running Ubuntu 10 with Gnome 2.30.2. This is a VMWare workstation image provided by another company that I do not have support in this regard. I am trying to access the graphical tools for configuring the network, users, and services but the System-Administration menu does not have these options listed. The main issue I am trying to solve is to correct the problems with the gnome menu options and network settings I have the gnome-system-tools package installed, and I am unable to run command-line versions of the tools, such as nm-applet (I get no GUI if I run that command, the process is running in the background). I realize that I can perform many tasks command-line, but I would like to use the GUI for administrative functions as I am not overly proficient for all command for restarting services and setting a static IP with a specific gateway. Further, I can run gnome-nettool, but I cannot change the IP, I can only see my network card. nm-connection-editor does not show any network cards that I can configure to change the IP. Currently, I am getting a DHCP through my NAT in VMWare, I want to set it to a specific IP address though. Preferences Menu (note some missing options) ![Preferences Menu][1] Admin Menu (note some missing options) ![Admin Menu][2] Network Tools (I can view but not change IP address) ![Network Tools][3] Network Settings (Unable to change IP address) ![Network Settings][4] Network Connections (no connections listed, not even my existing ethernet NAT connection through VMWare) ![Network Connections][5] See images here that I have referenced: 1- http://i.imgur.com/kl8pP.png 2- http://i.imgur.com/K3Cjz.png 3- Iq7Xb.png 4- 7wheV.png 5- J2ad8.png

  Read the article

• Automatically update SVN repository on another server

  - by Mikey C

  We have 2 Ubuntu web servers, one of which is our staging server (Staging) and the other is our live server (Live). Staging has our Subversion repository, as well as the latest version of our sites on it. Because the SVN server is running on Staging, I've added post-commit hook scripts so that the staging server automatically has the latest code. Easy. However, I'd like one of the repositories on Live to also stay updated. This is a repository of images, PDFs and suchlike. When a team member commits to this, I'd like it to automatically update on the live servers so it can be used in mailings, content managed pages etc. I'd add something to the post-commit to SSH across and update, but for security, we can only SSH from one server to another as user 'commandLine', whereas the 'www-data' user runs the post-commit. I'd rather not run a cron on Live to update every 5 minutes, but I can't see another way of doing it without altering all our user permissions. Any ideas?

  Read the article

• Reasonably Secure Alternative to Poptop PPTP Server for Ubuntu server and Windows clients?

  - by wag2639

  I have a poptp server running on a old Fedora server but I'm upgrading to an Ubuntu 10.04 server. I was wondering if there are any good, reasonable secure alternatives to poptop that in can install on our new Ubuntu server as a way to get VPN access from Windows clients (XP and 7) to get remote access into our Intranet. We only use the VPN to access files located inside the network; we do not need to use it as a proxy/gateway. I've looked into openVPN but it seemed way too complicated and I would prefer something built into Windows. A Windows 7 only solution is OK.

  Read the article

• Which linux server distrabution best to run lamp server for production enviroment?

  - by meyosef

  Which Linux server distribution the best to run lamp server for production environment? 1. sharing hosting 2. virtual hosting 3. dedicated hosting (Ubuntu server, redhat,....) Thanks, Yosef

  Read the article

< Previous Page | 144 145 146 147 148 149 150 151 152 153 154 155  | Next Page >