Search Results

Search found 6305 results on 253 pages for 'ankita 13 3'.

Page 149/253 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• iPhone 4.0 SDK UIWebView crashes with DOMHTMLElement error..

  - by hytgbn

  My app have an UIWebView and I open a twitter oauth page with it. when I open oauth page , it works well. after I sign-in, it redirects to another page which have PIN code. and It crashes down with logs below. Is it a bug in 4.0 SDK? 2010-06-14 22:55:11.159 AllFx[1435:2003] -[DOMHTMLElement setHref:]: unrecognized selector sent to instance 0x74e4040 2010-06-14 22:55:11.162 AllFx[1435:2003] *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[DOMHTMLElement setHref:]: unrecognized selector sent to instance 0x74e4040' *** Call stack at first throw: ( 0 CoreFoundation 0x02b6c919 __exceptionPreprocess + 185 1 libobjc.A.dylib 0x02cba5de objc_exception_throw + 47 2 CoreFoundation 0x02b6e42b -[NSObject(NSObject) doesNotRecognizeSelector:] + 187 3 CoreFoundation 0x02ade116 ___forwarding___ + 966 4 CoreFoundation 0x02addcd2 _CF_forwarding_prep_0 + 50 5 DataDetectorsUI 0x0bde8ac4 -[WebTextIterator(DDExtensions) dd_doUrlificationForQuery:forResults:document:DOMWasModified:URLificationBlock:] + 1731 6 DataDetectorsUI 0x0bde2f09 -[DDOperation _doURLificationOnDocument] + 341 7 DataDetectorsUI 0x0bddff9c -[DDDetectionController _doURLificationOnWebThreadAndRelease:] + 563 8 CoreFoundation 0x02add42d __invoking___ + 29 9 CoreFoundation 0x02add301 -[NSInvocation invoke] + 145 10 WebCore 0x039fa2b3 _ZL15HandleAPISourcePv + 147 11 CoreFoundation 0x02b4dd7f __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15 12 CoreFoundation 0x02aac2cb __CFRunLoopDoSources0 + 571 13 CoreFoundation 0x02aab7c6 __CFRunLoopRun + 470 14 CoreFoundation 0x02aab280 CFRunLoopRunSpecific + 208 15 CoreFoundation 0x02aab1a1 CFRunLoopRunInMode + 97 16 WebCore 0x039943c3 _ZL12RunWebThreadPv + 483 17 libSystem.B.dylib 0x98552a19 _pthread_start + 345 18 libSystem.B.dylib 0x9855289e thread_start + 34 ) terminate called after throwing an instance of 'NSException'

  Read the article

• Which are the Extreme Programming "core" practices?

  - by MiKo

  Recently, I began reading about agile methodologies and XP in particular. I am a bit confused, though, about what are considered the practices involved in extreme programming. More precisely: Wikipedia reports 12 practices, which I someway believe to be the "classic" ones. Both Kent Beck and Ron Jeffries indicate 13 practices (you can find the links at the bottom of wikipedia page about "Extreme Programming Practices", I cannot post them here since I am new user of Stack Overflow), while this review of Kent Beck's "XP explained" (2nd edition) report more than 20 somewhat different practices. As a complete beginner in the topic (and basically as a complete beginner as a programmer), I would like to be enlightened on the matter. My impression is that I should look at Beck's book, since the second edition has been written after several years of XPerience, but I can find a lot less material based on that.

  Read the article

• Sed does not work in expect

  - by Sharjeel Sayed

  I made this bash one-liner which I use to list Weblogic instances running along with their full paths.This works well when I run it from the shell. /usr/ucb/ps auwwx | grep weblogic | tr ' ' '\n' | grep security.policy | grep domain | awk -F'=' '{print $2}' | sed 's/weblogic.policy//' | sed 's/security\///' | sort I tried to incorporate this in an expect script send "echo Weblogic Processes: ; /usr/ucb/ps auwwx | grep weblogic | tr ' ' '\n' | grep security.policy | grep domain | awk -F'=' '{print \$2}' | sed 's/weblogic.policy//' | sed 's/security\///' | sort ; echo ; echo\r" but I got this error sed: -e expression #1, char 13: unknown option to `s' Please help

  Read the article

• Oracle(10) SQL: calculating final sum depending on two field

  - by Zsolt Botykai

  First the disclaimer: I never learnt any programming in school, and just have to deal with various SQL problems (too). So now I've got two tables, TABLE1: ACCNO BAL1 BAL2 11111 20 10 And TABLE2 (which has the ACCNO key, of course) related rows to '11111': DATENUM AMT 1 -5 2 -10 3 8 4 -23 5 100 6 -120 7 140 Now I have to find the new BAL1 and BAL2 using the following rules: BAL1 AMT must be substracted from or added to BAL1 until BAL1 == 0 (and BAL2 0) if BAL1 reaches 0 then the (if any) remainder of BAL1 must be substracted from BAL2 if BAL2 reaches 0 too, from then only BAL1 should be modified. So using the above data: DATENUM AMT BAL1 BAL2 0 0 20 10 /*starting record*/ 1 -5 15 10 2 -10 5 10 3 8 13 10 4 -23 0 0 5 100 100 0 6 -120 -20 0 7 140 20 0 And I need the last two BAL1 and BAL2. How can I calculate them using (Oracle 10) SQL?

  Read the article

• Custom Designers deserialize SplitContainer problem

  - by Hamid

  Hi I just using this link http://msdn.microsoft.com/en-us/magazine/cc163634.aspx for extent custom designer. I using BasicDesignerLoader type because need xml data for save in db. all thing work properly. I try add SplitContainer to form and then serialize form, it's ok, but when try deserialize it, items that contains in SplitContainer Panel, failed. after i check it see not implement ReadRefrence method (only wrote WriteReference method) How to implement it fast ? Note: After download sample from http://download.microsoft.com/download/f/2/7/f279e71e-efb0-4155-873d-5554a0608523/DesignerHosting.exe, you must add typeof(System.Windows.Forms.SplitContainer) to ToolboxXmlManager.cs(Line 13) in ToolBox project. Note2: Find (De)Serialize method in BasicHostLoader.cs at Loader Project Thanks in advanced

  Read the article

• a question on common lisp

  - by kostas

  Hello people, I'm getting crazy with a small problem here, I keep getting an error and I cant seem to figure out why, the code is supposed to change the range of a list, so if we give it a list with values (1 2 3 4) and we want to change the range in 11 to fourteen the result would be (11 12 13 14) the problem is that the last function called scale-list will give back an error saying: Debugger entered--Lisp error: (wrong-type-argument number-or-marker-p nil) anybody has a clue why? I use aquamacs as an editor thanks in advance ;;finds minimum in a list (defun minimum(list) (car (sort list #'<))) ;;finds maximum in a list (defun maximum(list) (car (sort list #'>))) ;;calculates the range of a list (defun range(list) (- (maximum list) (minimum list))) ;;this codes scales a value from a list (defun scale-value(list low high n) (+ (/ (* (- (nth (- n 1) list) (minimum list)) (- high low)) (range list)) low)) ;and this code is supposed to scale the whole list (defun scale-list(list low high n) (unless (= n 0) (cons (scale-value list low high n) (scale-list list low high (- n 1))))) (scale-list '(0.1 0.3 0.5 0.9) 20 30 4)

  Read the article

• How to render partial.js in rails 3

  - by julian-mann

  Using rails3 - I have a project with many tasks. I want to use javascript to build the UI for each task. I figured I could display those tasks on the projects show page by rendering a javascript partial for each. I can't get 'tasks/show' to see tasks/show.js.erb Any ideas? In projects/show.html.erb <div id="tasks"> <%= render(:partial => "tasks/show", :collection => @project.tasks) %> </div> tasks/show.js.erb $("tasks").append(new TaskWidget(task.id)) I get the errors ActionView::MissingTemplate in Projects#show Missing partial tasks/show with {:handlers=>[:erb, :rjs, :builder, :rhtml, :rxml], :formats=>[:html], :locale=>[:en, :en]} in view paths .... around line #13 Thanks

  Read the article

• gethostname() returns accurate hostname, bind() doesn't like it

  - by user2072848

  Doing a python socket tutorial, entire codebase is as follows import socket as so s = so.socket() host = so.gethostname() port = 12345 s.bind((host, port)) s.listen(5) while True: c, addr = s.accept() print 'Got connection from', addr c.send('Thank you for connecting') c.close() and error message: Traceback (most recent call last): File "server.py", line 13, in <module> s.bind((host, port)) File "/Users/solid*name*/anaconda/lib/python2.7/socket.py", line 224, in meth return getattr(self._sock,name)(*args) socket.gaierror: [Errno 8] nodename nor servname provided, or not known Printing hostname gives me super*name* Which is, in fact, my computer's hostname.

  Read the article

• IRQ problem with 2.6.32/2.6.39 kernel on Debian Squeeze x86_64

  - by MasterM

  I recently assembled a new computer so that all hardware is pretty new. Since then I've been experiencing some problem with IRQs when running Debian 6.0. On random occasions, usually after an hour or so of running I hear a beep and this shows up in dmesg: [ 3537.762795] irq 16: nobody cared (try booting with the "irqpoll" option) [ 3537.762797] Pid: 0, comm: swapper Tainted: P W O 2.6.39-2-amd64 #1 [ 3537.762798] Call Trace: [ 3537.762799] <IRQ> [<ffffffff810924d4>] ? __report_bad_irq+0x3a/0xa2 [ 3537.762803] [<ffffffff810926a4>] ? note_interrupt+0x168/0x1da [ 3537.762805] [<ffffffff81090dd4>] ? handle_irq_event_percpu+0x171/0x18f [ 3537.762807] [<ffffffff8100e0e2>] ? read_tsc+0x5/0x16 [ 3537.762809] [<ffffffff8106b8a2>] ? update_ts_time_stats+0x32/0x6b [ 3537.762810] [<ffffffff81090e26>] ? handle_irq_event+0x34/0x52 [ 3537.762812] [<ffffffff81063fb7>] ? sched_clock_idle_wakeup_event+0x12/0x1c [ 3537.762813] [<ffffffff81092df2>] ? handle_fasteoi_irq+0x82/0xa4 [ 3537.762815] [<ffffffff8100aadb>] ? handle_irq+0x1a/0x23 [ 3537.762816] [<ffffffff8100a384>] ? do_IRQ+0x45/0xaa [ 3537.762818] [<ffffffff81332c93>] ? common_interrupt+0x13/0x13 [ 3537.762818] <EOI> [<ffffffff81332c8e>] ? common_interrupt+0xe/0x13 [ 3537.762821] [<ffffffff81026800>] ? native_safe_halt+0x2/0x3 [ 3537.762829] [<ffffffffa016ed58>] ? acpi_idle_do_entry+0x39/0x62 [processor] [ 3537.762831] [<ffffffffa016edde>] ? acpi_idle_enter_c1+0x5d/0xad [processor] [ 3537.762834] [<ffffffff81261033>] ? cpuidle_idle_call+0x11f/0x1cc [ 3537.762835] [<ffffffff81008dd2>] ? cpu_idle+0xab/0xe1 [ 3537.762837] [<ffffffff8169fc60>] ? start_kernel+0x3e0/0x3eb [ 3537.762838] [<ffffffff8169f3c8>] ? x86_64_start_kernel+0x102/0x10f [ 3537.762839] handlers: [ 3537.762840] [<ffffffffa0358d5a>] (rtl8169_interrupt+0x0/0x2d7 [r8169]) [ 3537.762842] [<ffffffffa08ff2ca>] (nv_kern_isr+0x0/0x54 [nvidia]) [ 3537.762902] Disabling IRQ #16 After that Xorg either hogs on CPU or is unstable (up to hanging the system completely). When I restart Xorg everything is fine again and the problem doesn't occur until next reboot. I tried to upgrade the kernel from stock 2.6.32 to 2.6.39 from unstable repository but that didn't help. Booting with irqpoll option only seems to prolong the initial time period after which the problem occurs. I'm using latest NVIDIA drivers and Realtek firmware from firmware-realtek package. I have two GTX 560Ti that run in SLI. Disabling SLI or taking out one card completely doesn't solve the problem either. Output of uname -a is: Linux whitestar 2.6.39-2-amd64 #1 SMP Wed Jun 8 11:01:04 UTC 2011 x86_64 GNU/Linux Output of lspci is: 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 02:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 02:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 07:00.0 PCI bridge: Device 1b21:1080 (rev 01) 08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) 08:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) Contents of /proc/interrupts: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 77 0 0 0 0 0 0 0 IO-APIC-edge timer 1: 2 0 0 0 0 0 0 0 IO-APIC-edge i8042 8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 12: 4 0 0 0 0 0 0 0 IO-APIC-edge i8042 16: 699083 0 0 0 0 0 0 0 IO-APIC-fasteoi nvidia, eth0 17: 87810 0 0 0 0 0 0 0 IO-APIC-fasteoi firewire_ohci, hda_intel, nvidia 18: 242 0 0 0 0 0 0 0 IO-APIC-fasteoi hda_intel 23: 85925 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb5, ehci_hcd:usb6 40: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 41: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 42: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 43: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 44: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 45: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 46: 79853 0 0 0 0 0 0 0 PCI-MSI-edge ahci 48: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 49: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 50: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 51: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 52: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 53: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 54: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 55: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 56: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 57: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 58: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 59: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 60: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 61: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 62: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 63: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 64: 173506 0 0 0 0 0 0 0 PCI-MSI-edge hda_intel NMI: 482 89 25 13 277 24 11 10 Non-maskable interrupts LOC: 783857 194752 114133 70577 372438 179065 117179 162016 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 482 89 25 13 277 24 11 10 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RES: 131917 46750 7432 3291 150003 9576 3435 3067 Rescheduling interrupts CAL: 2759 6563 7150 6997 5387 7140 7269 6678 Function call interrupts TLB: 4396 2038 1336 492 5434 1896 1121 606 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 37 37 37 37 37 37 37 37 Machine check polls ERR: 0 MIS: 0 Last but not least, right after boot-up those lines are usually present in dmesg: [ 18.367094] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 18.458859] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. I'm not sure if it's related or a symptom of a bigger problem so I'm posting it just in case. I don't really know what other information might be of relevance here. Don't hesitate to ask for more in the comments.

  Read the article

• Millions of SYN_RECV connections, no DDoS

  - by ThomK

  We have such server structure: reverse proxy (nginx) - worker (uwsgi) - postgresql / memcached. All servers are in local network behind router, with NATed external ip:ports (http/s 80/443 to proxy, and ssh 22 to all servers). Problem is, that sometimes proxy server netstat reports MILLIONS of SYN_RECV connections. From same IP / same ports. Like that: nginx ~ # netstat -n | grep 83.238.153.195 tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV tcp 0 0 192.168.1.1:80 83.238.153.195:3107 SYN_RECV [...] And this is not DDoS, because all IPs affected belongs to our website users. On side note, users says that it's not affecting them. Website is online and working, but... that particular one (from example above) told me that website is down and Firefox can't connect. I've done tcpdump. 19:42:14.826011 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:14.826042 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:17.887331 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:17.887343 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:19.065497 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:23.918064 IP 83.238.153.195.zephyr-srv > 192.168.1.1.http: Flags [S], seq 1845850583, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:23.918076 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:25.265499 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:37.265501 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:37.758051 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:37.758069 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:40.714360 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:40.714374 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:41.665503 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:46.751073 IP 83.238.153.195.2107 > 192.168.1.1.http: Flags [S], seq 564208067, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:42:46.751087 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:47.665498 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:42:59.865499 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:01.265500 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:13.320382 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:13.320399 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:16.320556 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:16.320569 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:17.665498 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:22.250069 IP 83.238.153.195.2114 > 192.168.1.1.http: Flags [S], seq 2136055006, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:22.250080 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:23.665500 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:23.865501 IP 192.168.1.1.http > 83.238.153.195.2107: Flags [S.], seq 3188568660, ack 564208068, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:35.665498 IP 192.168.1.1.http > 83.238.153.195.2114: Flags [S.], seq 3754336171, ack 2136055007, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:37.903038 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:37.903054 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:40.772899 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:40.772912 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:41.865500 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:46.793057 IP 83.238.153.195.2213 > 192.168.1.1.http: Flags [S], seq 2918118729, win 65535, options [mss 1412,nop,wscale 0,nop,nop,sackOK], length 0 19:43:46.793069 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:47.865500 IP 192.168.1.1.http > 83.238.153.195.2213: Flags [S.], seq 4145523337, ack 2918118730, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 19:43:49.465503 IP 192.168.1.1.http > 83.238.153.195.zephyr-srv: Flags [S.], seq 2835837547, ack 1845850584, win 5840, options [mss 1460,nop,nop,sackOK,nop,wscale 7], length 0 Anyone have some thoughts on that?

  Read the article

• IE Mixed Content Warining when using https URLs and http:443 URLs?

  - by Campbeln

  I'm getting the good ole' "This page contains both secure and nonsecure items." dialog in IE when connecting to an HTTPS site. No big deal... I've just got something coming in over a non-secure connection so that should be an easy fix, right? So I go into "View Web Page Privacy Policy..." to look to see where I've included an HTTP file, and this is what I see... https://blah/path/to/file.htm https://blah/path/to/file.js http://blah:443/path/to/file.css Um... ok... so... there is an HTTP only URL being requested, but it is going over port 443 ("https://blah/" is shorthand for "http://blah:443/") so... What is the deal with this!? IE 7.0.5730.13 can't possibly be THAT stupid, can it? Is there an IIS setting that needs to be tweaked?

  Read the article

• Merge and match oracle

  - by Dante

  I really need some help with my query. I am trying to merge two tables together, but I only want the data were Cast_Date and Sched_Cast_Date are the same. I try to run the query but I get the error missing keyword in the line 21 column 13. I am sure that this is not the only potential error that I have. Could someone help me to get this query up and running? Below is the query that I am running. merge into Dante5 d5 using (SELECT bbp.subcar treadwell, bbp.BATCH_ID batch_id, bcs.SILICON silicon, bcs.SULPHUR sulphur, bcs.MANGANESE manganese, bcs.PHOSPHORUS phosphorus, bofcs.temperature temperature, to_char(bbp.START_POUR, 'dd-MON-yy hh24:MI') start_pour, to_char(bbp.END_POUR, 'dd-MON-yy hh24:MI') end_pour, to_char(bbp.sched_cast_date, 'dd-mon-yy hh24:mi') Sched_cast_date FROM bof_chem_sample bcs, bof_batch_pour bbp, bof_celox_sample bofcs WHERE bcs.SAMPLE_CODE= to_char('D1') and bofcs.sample_code=bcs.sample_code and bofcs.batch_id=bcs.batch_id and bcs.batch_id = bbp.batch_id and bofcs.temperature0 AND bbp.START_POUR=to_DATE('01012011000000','ddMmyyyyHH24MISS') and bbp.sched_cast_date<=sysdate)d3 ON (d3.sched_cast_date=d5.sched_cast_date) when matched then delete where (d5 sched_cast_date=to_date('18012011','ddmmyyyy')) when not matched then update set d5=batch_id='99999'

  Read the article

• Java Charset problem on linux

  - by scot

  Hi, problem: I have a string containing special characters which i convert to bytes and vice versa..the conversion works properly on windows but on linux the special character is not converted properly.the default charset on linux is UTF-8 as seen with Charset.defaultCharset.getdisplayName() however if i run on linux with option -Dfile.encoding=ISO-8859-1 it works properly.. how to make it work using the UTF-8 default charset and not setting the -D option in unix environment. edit: i use jdk1.6.13 edit:code snippet works with cs = "ISO-8859-1"; or cs="UTF-8"; on win but not in linux String x = "½"; System.out.println(x); byte[] ba = x.getBytes(Charset.forName(cs)); for (byte b : ba) { System.out.println(b); } String y = new String(ba, Charset.forName(cs)); System.out.println(y); ~regards daed

  Read the article

• Why unsigned int contained negative number

  - by Daziplqa

  Hi All, I am new to C, What I know about unsigned numerics (unsigned short, int and longs), that It contains positive numbers only, but the following simple program successfully assigned a negative number to an unsigned int: 1 /* 2 * ===================================================================================== 3 * 4 * Filename: prog4.c 5 * 6 * ===================================================================================== 7 */ 8 9 #include <stdio.h> 10 11 int main(void){ 12 13 int v1 =0, v2=0; 14 unsigned int sum; 15 16 v1 = 10; 17 v2 = 20; 18 19 sum = v1 - v2; 20 21 printf("The subtraction of %i from %i is %i \n" , v1, v2, sum); 22 23 return 0; 24 } The output is : The subtraction of 10 from 20 is -10

  Read the article

• How to create Shared VB Array Initialisors for NerdDinner

  - by David A Gibson

  Hello, I am trying to work my way through the NerdDinner tutorial - and as an exercise I'm converting it to VB as I go. I'm not very far in and after having gotten past the C# Yield statement I'm stuck on Shared VB Array Initialisors. static IDictionary<string, Regex> countryRegex = new Dictionary<string, Regex>() { { "USA", new Regex("^[2-9]\\d{2}-\\d{3}-\\d{4}$")}, { "UK", new Regex("(^1300\\d{6}$)|(^1800|1900|1902\\d{6}$)|(^0[2|3|7|8]{1}[0- 9]{8}$)|(^13\\d{4}$)|(^04\\d{2,3}\\d{6}$)")}, { "Netherlands", new Regex("(^\\+[0-9]{2}|^\\+[0- 9]{2}\\(0\\)|^\\(\\+[0-9]{2}\\)\\(0\\)|^00[0-9]{2}|^0)([0-9]{9}$|[0-9\\- \\s]{10}$)")}, Can anyone please help me write this in VB? Public Shared countryRegex As IDictionary(Of String, Regex) = New Dictionary(Of String, Regex)() {("USA", New Regex("^[2-9]\\d{2}-\\d{3}-\\d{4}$"))} This code has an error as it does not accept the String and the Regex as an item for the array. Thanks

  Read the article

• Strlen of MAX 16 chars string using bitwise operators

  - by fabrizioM

  The challenge is to find the fastest way to determine in C/C++ the length of a c-string using bitwise operations in C. char thestring[16]; The c-string has a max size of 16 chars and is inside a buffer If the string is equal to 16 chars doesn't have the null byte at the end. I am sure can be done but didn't got it right yet. I am working on this at the moment, but assuming the string is memcpied on a zero-filled buffer. len = buff[0] != 0x0 + buff[1] != 0x0 + buff[2] != 0x0 + buff[3] != 0x0 + buff[4] != 0x0 + buff[5] != 0x0 + buff[6] != 0x0 + buff[7] != 0x0 + buff[8] != 0x0 + buff[9] != 0x0 + buff[10] != 0x0 + buff[11] != 0x0 + buff[12] != 0x0 + buff[13] != 0x0 + buff[14] != 0x0 + buff[15] != 0x0;

  Read the article

• BinaryFormatter with MemoryStream Question

  - by Changeling

  I am testing BinaryFormatter to see how it will work for me and I have a simple question: When using it with the string HELLO, and I convert the MemoryStream to an array, it gives me 29 dimensions, with five of them being the actual data towards the end of the dimensions: BinaryFormatter bf = new BinaryFormatter(); MemoryStream ms = new MemoryStream(); byte[] bytes; string originalData = "HELLO"; bf.Serialize(ms, originalData); ms.Seek(0, 0); bytes = ms.ToArray(); returns - bytes {Dimensions:[29]} byte[] [0] 0 byte [1] 1 byte [2] 0 byte [3] 0 byte [4] 0 byte [5] 255 byte [6] 255 byte [7] 255 byte [8] 255 byte [9] 1 byte [10] 0 byte [11] 0 byte [12] 0 byte [13] 0 byte [14] 0 byte [15] 0 byte [16] 0 byte [17] 6 byte [18] 1 byte [19] 0 byte [20] 0 byte [21] 0 byte [22] 5 byte [23] 72 byte [24] 69 byte [25] 76 byte [26] 76 byte [27] 79 byte [28] 11 byte Is there a way to only return the data encoded as bytes without all the extraneous information?

  Read the article

• Opening Microsoft Word files in c# .net

  - by Dave

  Hi, I'm trying to use the simple code here: http://www.c-sharpcorner.com/UploadFile/Globalking/fileAccessingusingcsharp02242006050207AM/fileAccessingusingcsharp.aspx But I get the following error message when trying to declare a "Word" object. Error 1 The type or namespace name 'Word' could not be found (are you missing a using directive or an assembly reference?) C:\Users..\Documents\Visual Studio 2010\WebSites\Copying1_1\Default.aspx.cs 89 13 C:...\Copying1_1\ Any suggestions? N.b. I went to "add reference" and added "Microsoft Word 12 library", but it doesn't appear in the solution explorer. I also added:"using Microsoft.Office;"

  Read the article

• Amazon EC2 EBS automatic backup one-liner works manually but not from cron

  - by dan

  I am trying to implement an automatic backup system for my EBS on Amazon AWS. When I run this command as ec2-user: /opt/aws/bin/ec2-create-snapshot --region us-east-1 -K /home/ec2-user/pk.pem -C /home/ec2-user/cert.pem -d "vol-******** snapshot" vol-******** everything works fine. But if I add this line into /etc/crontab and restart the crond service: 15 12 * * * ec2-user /opt/aws/bin/ec2-create-snapshot --region us-east-1 -K /home/ec2-user/pk.pem -C /home/ec2-user/cert.pem -d "vol-******** snapshot" vol-******** that doesn't work. I checked var/log/cron and there is this line, therefore the command gets executed: Dec 13 12:15:01 ip-10-204-111-94 CROND[4201]: (ec2-user) CMD (/opt/aws/bin/ec2-create-snapshot --region us-east-1 -K /home/ec2-user/pk.pem -C /home/ec2-user/cert.pem -d "vol-******** snapshot" vol-******** ) Can you please help me to troubleshoot the problem? I guess is some environment problem - maybe the lack of some variable. If that's the case I don't know what to do about it. Thanks.

  Read the article

• How can I get FreeNAS to respond to libvirt shutdown requests

  - by ptomli

  I have a KVM VM of FreeNAS 0.7.1 Shere (revision 5127) running on Ubuntu Server 10.04 and I'm unable to convince the VM to shutdown from the host virsh shutdown freenas I would expect this to send some ACPI? trigger to the VM and FreeNAS then do what it's told. I'm not a FreeBSD fundi so I don't really know what packages or processes to poke to get this running. I have tried to convince powerd to run, but the VM cpus don't have the required freq entry Sysctl HW $ sysctl hw hw.machine: amd64 hw.model: QEMU Virtual CPU version 0.12.3 hw.ncpu: 1 hw.byteorder: 1234 hw.physmem: 523116544 hw.usermem: 463806464 hw.pagesize: 4096 hw.floatingpoint: 1 hw.machine_arch: amd64 hw.realmem: 536850432 hw.aac.iosize_max: 65536 hw.amr.force_sg32: 0 hw.an.an_cache_iponly: 1 hw.an.an_cache_mcastonly: 0 hw.an.an_cache_mode: dbm hw.an.an_dump: off hw.ata.to: 15 hw.ata.wc: 1 hw.ata.atapi_dma: 1 hw.ata.ata_dma_check_80pin: 1 hw.ata.ata_dma: 1 hw.ath.txbuf: 200 hw.ath.rxbuf: 40 hw.ath.regdomain: 0 hw.ath.countrycode: 0 hw.ath.xchanmode: 1 hw.ath.outdoor: 1 hw.ath.calibrate: 30 hw.ath.hal.swba_backoff: 0 hw.ath.hal.sw_brt: 10 hw.ath.hal.dma_brt: 2 hw.bce.msi_enable: 1 hw.bce.tso_enable: 1 hw.bge.allow_asf: 0 hw.cardbus.cis_debug: 0 hw.cardbus.debug: 0 hw.cs.recv_delay: 570 hw.cs.ignore_checksum_failure: 0 hw.cs.debug: 0 hw.cxgb.snd_queue_len: 50 hw.cxgb.use_16k_clusters: 1 hw.cxgb.force_fw_update: 0 hw.cxgb.singleq: 0 hw.cxgb.ofld_disable: 0 hw.cxgb.msi_allowed: 2 hw.cxgb.txq_mr_size: 1024 hw.cxgb.sleep_ticks: 1 hw.cxgb.tx_coalesce: 0 hw.firewire.hold_count: 3 hw.firewire.try_bmr: 1 hw.firewire.fwmem.speed: 2 hw.firewire.fwmem.eui64_lo: 0 hw.firewire.fwmem.eui64_hi: 0 hw.firewire.phydma_enable: 1 hw.firewire.nocyclemaster: 0 hw.firewire.fwe.rx_queue_len: 128 hw.firewire.fwe.tx_speed: 2 hw.firewire.fwe.stream_ch: 1 hw.firewire.fwip.rx_queue_len: 128 hw.firewire.sbp.tags: 0 hw.firewire.sbp.use_doorbell: 0 hw.firewire.sbp.scan_delay: 500 hw.firewire.sbp.login_delay: 1000 hw.firewire.sbp.exclusive_login: 1 hw.firewire.sbp.max_speed: -1 hw.firewire.sbp.auto_login: 1 hw.mfi.max_cmds: 128 hw.mfi.event_class: 0 hw.mfi.event_locale: 65535 hw.pccard.cis_debug: 0 hw.pccard.debug: 0 hw.cbb.debug: 0 hw.cbb.start_32_io: 4096 hw.cbb.start_16_io: 256 hw.cbb.start_memory: 2281701376 hw.pcic.pd6722_vsense: 1 hw.pcic.intr_mask: 57016 hw.pci.honor_msi_blacklist: 1 hw.pci.enable_msix: 1 hw.pci.enable_msi: 1 hw.pci.do_power_resume: 1 hw.pci.do_power_nodriver: 0 hw.pci.enable_io_modes: 1 hw.pci.host_mem_start: 2147483648 hw.syscons.kbd_debug: 1 hw.syscons.kbd_reboot: 1 hw.syscons.bell: 1 hw.syscons.saver.keybonly: 1 hw.syscons.sc_no_suspend_vtswitch: 0 hw.usb.uplcom.interval: 100 hw.usb.uvscom.interval: 100 hw.usb.uvscom.opktsize: 8 hw.wi.debug: 0 hw.wi.txerate: 0 hw.xe.debug: 0 hw.intr_storm_threshold: 1000 hw.availpages: 127714 hw.bus.devctl_disable: 0 hw.ste.rxsyncs: 0 hw.busdma.total_bpages: 32 hw.busdma.zone0.total_bpages: 32 hw.busdma.zone0.free_bpages: 32 hw.busdma.zone0.reserved_bpages: 0 hw.busdma.zone0.active_bpages: 0 hw.busdma.zone0.total_bounced: 0 hw.busdma.zone0.total_deferred: 0 hw.busdma.zone0.lowaddr: 0xffffffff hw.busdma.zone0.alignment: 2 hw.busdma.zone0.boundary: 65536 hw.clockrate: 2808 hw.instruction_sse: 1 hw.apic.enable_extint: 0 hw.kbd.keymap_restrict_change: 0 hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 0 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.cpu.cx_lowest: C1 Processes $ ps ax PID TT STAT TIME COMMAND 0 ?? DLs 0:00.00 [swapper] 1 ?? ILs 0:00.00 /sbin/init -- 2 ?? DL 0:00.08 [g_event] 3 ?? DL 0:00.29 [g_up] 4 ?? DL 0:00.33 [g_down] 5 ?? DL 0:00.00 [crypto] 6 ?? DL 0:00.00 [crypto returns] 7 ?? DL 0:00.00 [xpt_thrd] 8 ?? DL 0:00.00 [kqueue taskq] 9 ?? DL 0:00.00 [acpi_task_0] 10 ?? RL 34:12.42 [idle: cpu0] 11 ?? WL 0:01.13 [swi4: clock sio] 12 ?? WL 0:00.00 [swi3: vm] 13 ?? WL 0:00.00 [swi1: net] 14 ?? DL 0:00.04 [yarrow] 15 ?? WL 0:00.00 [swi6: task queue] 16 ?? WL 0:00.00 [swi2: cambio] 17 ?? DL 0:00.00 [acpi_task_1] 18 ?? DL 0:00.00 [acpi_task_2] 19 ?? WL 0:00.00 [swi5: +] 20 ?? DL 0:00.01 [thread taskq] 21 ?? WL 0:00.00 [swi6: Giant taskq] 22 ?? WL 0:00.00 [irq9: acpi0] 23 ?? WL 0:00.09 [irq14: ata0] 24 ?? WL 0:00.11 [irq15: ata1] 25 ?? WL 0:00.57 [irq11: ed0 uhci0] 26 ?? DL 0:00.00 [usb0] 27 ?? DL 0:00.00 [usbtask-hc] 28 ?? DL 0:00.00 [usbtask-dr] 29 ?? WL 0:00.01 [irq1: atkbd0] 30 ?? WL 0:00.00 [swi0: sio] 31 ?? DL 0:00.00 [sctp_iterator] 32 ?? DL 0:00.00 [pagedaemon] 33 ?? DL 0:00.00 [vmdaemon] 34 ?? DL 0:00.00 [idlepoll] 35 ?? DL 0:00.00 [pagezero] 36 ?? DL 0:00.01 [bufdaemon] 37 ?? DL 0:00.00 [vnlru] 38 ?? DL 0:00.14 [syncer] 39 ?? DL 0:00.01 [softdepflush] 1221 ?? Is 0:00.00 /sbin/devd 1289 ?? Is 0:00.01 /usr/sbin/syslogd -ss -f /var/etc/syslog.conf 1608 ?? Is 0:00.00 /usr/sbin/cron -s 1692 ?? Ss 0:00.03 /usr/local/sbin/mDNSResponderPosix -b -f /var/etc/mdn 1730 ?? S 0:00.43 /usr/local/sbin/lighttpd -f /var/etc/lighttpd.conf -m 1882 ?? DL 0:00.00 [system_taskq] 1883 ?? DL 0:00.00 [arc_reclaim_thread] 4139 ?? S 0:00.03 /usr/local/bin/php /usr/local/www/exec.php 4144 ?? S 0:00.00 sh -c ps ax 4145 ?? R 0:00.00 ps ax 1816 v0 Is 0:00.01 login [pam] (login) 1818 v0 I+ 0:00.03 -tcsh (csh) 1817 v1 Is+ 0:00.00 /usr/libexec/getty Pc ttyv1 1402 con- I 0:00.00 /usr/local/sbin/afpd -F /var/etc/afpd.conf 1404 con- S 0:00.00 /usr/local/sbin/cnid_metad 1682 con- I 0:02.78 /usr/local/sbin/mt-daapd -m -c /var/etc/mt-daapd.conf 1789 con- S 0:00.18 /usr/local/bin/fuppesd --config-dir /var/etc --config Libvert snippet <domain type='kvm'> <name>freenas</name> <uuid>********-****-****-****-************</uuid> <memory>524288</memory> <currentMemory>524288</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> Is this possible? Ideally I'd like to be able to stop the host without having to manually deal with shutting down the VM.

  Read the article

• Excel VBA: importing CSV with dates as dd/mm/yyyy

  - by Michael Smith

  ello I understand this is a fairly common problem, but I'm yet to find a reliable solution. I have data in a csv file with the first column formatted dd/mm/yyyy. When I open it with Workbooks.OpenText it defaults to mm/dd/yyyy until it figures out that what it thinks is the month exceeds 12, then reverts to dd/mm/yyyy. This is my test code, which tries to force it as xlDMYFormat, and I've also tried the text format. I understand this problem only applies to *.csv files, not *.txt, but that isn't an acceptable solution. Option Base 1 Sub TestImport() Filename = "test.csv" Dim ColumnArray(1 To 1, 1 To 2) ColumnsDesired = Array(1) DataTypeArray = Array(xlDMYFormat) ' populate the array for fieldinfo For x = LBound(ColumnsDesired) To UBound(ColumnsDesired) ColumnArray(x, 1) = ColumnsDesired(x) ColumnArray(x, 2) = DataTypeArray(x) Next x Workbooks.OpenText Filename:=Filename, DataType:=xlDelimited, Comma:=True, FieldInfo:=ColumnArray End Sub test.csv contains: Date 11/03/2010 12/03/2010 13/03/2010 14/03/2010 15/03/2010 16/03/2010 17/03/2010 Thanks Michael

  Read the article

• Authlogic Facebook Connect and cucumber

  - by jspooner

  I added the authlogic_facebook_connect plugin to my project and I'm now having problem running my cucumber test because of a NoMethodError. undefined method `set_facebook_session' for nil:NilClass (NoMethodError) In authlogic_facebook_connect/Session.rb the method "authenticating_with_facebook_connect?" is called as some sort of callback and the controller is defined but is missing the 'set_facebook_session' method. def authenticating_with_facebook_connect? controller.set_facebook_session attempted_record.nil? && errors.empty? && controller.facebook_session end I don't understand why the cucumber test is not loading the controller with this method. I also test the app in development and cucumber environments and everything works perfect. Here is the full cucumber output. Feature: Authentication In order to keep security a user should only be able to edit their own profile Background: # features/authorization.feature:4 Given a valid user record for joe_runner # features/step_definitions/user_steps.rb:4 undefined method `set_facebook_session' for nil:NilClass (NoMethodError) ./vendor/plugins/authlogic/lib/authlogic/controller_adapters/abstract_adapter.rb:63:in `send' ./vendor/plugins/authlogic/lib/authlogic/controller_adapters/abstract_adapter.rb:63:in `method_missing' ./vendor/plugins/authlogic_facebook_connect/lib/authlogic_facebook_connect/session.rb:132:in `authenticating_with_facebook_connect?' ./vendor/plugins/authlogic/lib/authlogic/session/callbacks.rb:83:in `validate' ./vendor/plugins/authlogic/lib/authlogic/session/validation.rb:64:in `valid?' ./vendor/plugins/authlogic/lib/authlogic/session/existence.rb:65:in `save' ./vendor/plugins/authlogic/lib/authlogic/session/existence.rb:30:in `create' ./vendor/plugins/authlogic/lib/authlogic/acts_as_authentic/session_maintenance.rb:113:in `create_session' ./vendor/plugins/authlogic/lib/authlogic/acts_as_authentic/session_maintenance.rb:103:in `maintain_sessions' ./features/step_definitions/user_steps.rb:5:in `/^a valid user record for ([\w]*)$/' features/authorization.feature:5:in `Given a valid user record for joe_runner' Scenario: Jonathan can edit his profile but not other users profiles # features/authorization.feature:7 Given jonathan is logged in as an user # features/step_definitions/user_steps.rb:13 When I go to my user edit page # features/step_definitions/web_steps.rb:18 And I press "Update" # features/step_definitions/web_steps.rb:22 Then I should see "Account updated!" # features/step_definitions/web_steps.rb:142 When I go to joe_runner's user edit page # features/step_definitions/web_steps.rb:18 Then I should see "You do not allowed to access to view that page" # features/step_definitions/web_steps.rb:142 Failing Scenarios: cucumber features/authentication.feature:9 # Scenario: Signup cucumber features/authorization.feature:7 # Scenario: Jonathan can edit his profile but not other users profiles 2 scenarios (2 failed) 15 steps (2 failed, 13 skipped) 0m0.173s rake aborted! Command failed with status (1): [/System/Library/Frameworks/Ruby.framework/...] /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:995:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1010:in `call' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1010:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1094:in `sh' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1029:in `ruby' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1094:in `ruby' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.4/lib/cucumber/rake/task.rb:68:in `run' /Library/Ruby/Gems/1.8/gems/cucumber-0.6.4/lib/cucumber/rake/task.rb:138:in `define_task' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in `call' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:636:in `execute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:631:in `execute' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:597:in `invoke_with_call_chain' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in `synchronize' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in `invoke_with_call_chain' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:607:in `invoke_prerequisites' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:604:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:604:in `invoke_prerequisites' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:596:in `invoke_with_call_chain' /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/1.8/monitor.rb:242:in `synchronize' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:590:in `invoke_with_call_chain' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:583:in `invoke' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2051:in `invoke_task' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `each' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2029:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2023:in `top_level' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2001:in `run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:2068:in `standard_exception_handling' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/lib/rake.rb:1998:in `run' /Library/Ruby/Gems/1.8/gems/rake-0.8.7/bin/rake:31 /usr/bin/rake:19:in `load' /usr/bin/rake:19 activespoon:base_project jspooner$ There are a couple of blogs that give examples on how to test facebook apps with cucumber but they didn't help because my error comes before these. http://opensoul.org/2009/3/6/testing-facebook-with-cucumber http://ryanbigg.com/2010/03/testing-facebook/

  Read the article

• ASP.NET AJAX postback and jQuery

  - by Echilon

  I have a Textbox, a LinkButton and a RadioButtonList inside an UpdatePanel. When the button is clicked, the UpdatePanel shows matching items in the radiobuttonlist. This works fine, but I now need to make the same happen OnKeyDown on the TextBox. I'm trying to cancel all AJAX requests in progress but not having much luck. Firstly, on every keypress the UpdatePanel posts back, so only one letter can be changed at a time. Secondly, the textbox loses focus on postback. I need to show the list as normal, but OnKeyDown as well as when the button is pressed. This is what I have (control IDs shortened) $('#textBoxId').live('keydown', function(e) { if((e.keyCode >= 47 && e.keyCode <= 90) || e.keyCode == 13) { Sys.WebForms.PageRequestManager.getInstance().abortPostBack(); $('#buttonId').click(); $('#textBoxId').focus(); } }); Thanks for any insight.

  Read the article

• How to use Django's filesizeformat

  - by Scott LaPlant

  I have a small app I'm working on where I'm trying to use Django's built in filesizeformat. Currently, the format looks like this: {{ value|filesizeformat }} I understand I need to define this in my view.py file but, I can't seem to figure out how to do that. I've tried to use the syntax below: def filesizeformat(bytes): """ Formats the value like a 'human-readable' file size (i.e. 13 KB, 4.1 MB, 102 bytes, etc). """ try: bytes = float(bytes) except (TypeError,ValueError,UnicodeDecodeError): return u"0 bytes" if bytes < 1024: return ungettext("%(size)d byte", "%(size)d bytes", bytes) % {'size': bytes} if bytes < 1024 * 1024: return ugettext("%.1f KB") % (bytes / 1024) if bytes < 1024 * 1024 * 1024: return ugettext("%.1f MB") % (bytes / (1024 * 1024)) return ugettext("%.1f GB") % (bytes / (1024 * 1024 * 1024)) filesizeformat.is_safe = True I've then replaced 'value' with 'bytes' in the template but, this does not seem to work. Any suggestions?

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >