Search Results

Search found 6920 results on 277 pages for 'block'.

Page 149/277 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

  • Creating bootable Fedora USB with persistent storage

    - by dooffas
    I am attempting to burn the full Fedora 19 x86_64 DVD iso to a USB drive and have a separate partition on it for a kickstart file / other media that will be installed in the kickstart process. With the Ubuntu server 12 iso, you can simply dd the iso to the usb drive: dd if=/path/to/iso of=/dev/sdb Once the iso has been burnt, open gparted and create a ext2 parition in the allocated space. However, this does not seem to work with the Fedora ISO. When loading the USB drive in gparted I get a warning and an error: Warning: The driver descriptor says the physical block size is 2048 bytes, but Linux says it is 512 bytes. Error: The partition's data region doesn't occupy the entire partition. Ignoring both of these errors allows gparted to load the usb drive, however it shows a blank drive with no partition table. Has anyone come across this before? From what I have found, it may have something to do with the fact that Fedora use isohybrid.

    Read the article

  • Apache2: How do I restrict access to a directory, but allow access to one file within it?

    - by Nick
    I've inherited a poorly designed web app, which has a certain file that needs to be publicly accessible, but that file is inside a directory which should not. In other words, I need a way to block all files and sub-directories within a directory, but over-ride it for a single file. I'm trying this: # No one needs to access this directly <Directory /var/www/DangerousDirectory/> Order Deny,allow Deny from all # But this file is OK: <Files /var/www/DangerousDirectory/SafeFile.html> Allow from all </Files> </Directory> But it's not working- it just blocks everything including the file I want to allow. Any suggestions?

    Read the article

  • Database implementation question? [closed]

    - by gundam
    consider a disk with a sector size of 512 bytes, 2000 tracks/surface, 50 sectors/track, 5 doubled sided platters, average seek time is 10 msec. Assume a block size of 1024-byte is selected. Assume a file that contains 100,000 records of 100-byte each is to be stored on the disk, and NONE of the reocd can be spanned 2 blocks. How many blocks are needed to store the entire file?? If the file is arranged sequentially on disk, how many surfaces are required?? Now, i have calculated that 10,000 blocks are needed to store 100,000 records. But i am not sure how to find out the answer of the surfaces required. I only calculated the capacity of track is 25KB and capacity of surface is 50,000 KB But I don't know how to calculate the number of surfaces... Could anyone help me how to get the answer? Thanks a lot!!

    Read the article

  • Nginx HTTPS when only matching admin subfolder

    - by sebastyuiop
    I have managed to get all /admin requests redirected to https by: server { listen 80; location /admin { rewrite ^ https://$server_name$request_uri?$args permanent; } } But can't figure out how to get all https requests that are not within /admin redirected to http, so far I have: server { listen 443; location ~ /admin { rewrite ^ http://$server_name$request_uri?$args permanent; } } EDIT: I have got the redirects working as required but can't stop the /admin url going to 404. It feels like I need to put something in the empty block. server { listen 443; location /admin { } location / { rewrite ^ http://$server_name$request_uri?$args permanent; } } Thanks

    Read the article

  • Limiting to the ServerName in Apache2

    - by David
    I have 2 sites defined in my Apache2. Each one has a servername. For example: Server 1 (first in sites-enabled) responds to www.example.com Server 2 (second in sites-enabled) responds to www.example2.com Ok, the problem is when I type the server IP in the URL, the first server responds. How could I limit the response to only specifying its servername? I would like to block the IP calls. If that is not possible, I would like the second server to respond, not the first. I cannot change the order because there are aliases defined in the second server that would override the first server config.

    Read the article

  • Setting Events in Matlab/Simulink Stateflow

    - by GuiccoPiano
    How can I set an event in a Simulink Stateflow (statechart) based on some value. What I mean is this. I have a variable called "choice". This "choice" comes in as an input from a simulink block.The value of choice is between 1 and 4. So all I want to do is this: if choice == 1 then trigger/set eventBlue if choice == 2 then trigger/set eventRed if choice == 3 then trigger/set eventWhite if choice == 4 then trigger/set eventGreen else trigger/set eventYellow So how do i do that? what is the command?

    Read the article

  • Best way to copy large amount of data between partitions

    - by skinp
    I'm looking to transfer data across 2 lv of an HP-UX server. I have a couple of those transfers to do, some of which are mostly binary (Oracle tablespace...) and some others are more text files (logs...). Used data size of the volumes is between 100Gb and 1Tb. Also, I will be changing the block size from 1K to 8K on some of these partitions... Things I'm looking for: Guarantees data integrity Fastest data transfer speed Keeps file ownership and permissions Right now, I've thought about dd, cp and rsync, but I'm not sure on the best one to use and the best way to use them...

    Read the article

  • Is it possible with Google searches to ban any and all results from a domain? [closed]

    - by Stu Thompson
    Is it possible to configure Google somehow to permanently ban search results from domains that I know 100% are never, ever going to make me happy? Something cookie/session based maybe? E.g. I want to ban (permanently, forever and always) results from experts-exchange.com. Every time I click results that take me to their page I just want to scream. Update! Google has released a Chrome Extension to allow users to block individual site from Google search results! Personal Blocklist (by Google). (Since this question has been closed, I cannot answer it.)

    Read the article

  • How do I get `set show-all-if-ambiguous on` in my .inputrc to play nice with the Python interpreter?

    - by ysim
    I noticed that after I added the set show-all-if-ambiguous on line to my ~/.inputrc, whenever I pressed tab to indent a block, it would show me the bash Display all ... possibilities? (y or n) prompt, and leave me unable to indent the actual code. Is there any way to keep that line in my .inputrc but still have the tab key work as expected in the Python interpreter? This is in my VirtualBox Ubuntu 12.04 VM, if it matters. EDIT: Curiously, I now have a different issue with the Python shell that comes with Django -- when I press tab, I get Python tab completion, but only with one Tab press. I've opened a separate question here for it.

    Read the article

  • Mimicking Google's Persistant Disks -- Is this a logical FreeBSD disaster recovery strategy?

    - by Casey Jordan
    I am looking into FreeBSD to provide a more comprehensive backup and disaster recovery strategy for database servers. Ideally I want to mimic what google is doing with "Persistant disks" https://developers.google.com/compute/docs/disks#snapshots I am hoping someone who knows more about FreeBSD can validate these ideas/questions: I have read that FreeBSD can take instant disk snapshots, therefore if our databases trigger a consistent state (Block all writes, and flush buffers to disk), I would assume I could take snapshots every hour without service interruption for more than a few seconds. Is this true? Is there a way to take snapshots and back them up offsite easily? Can this be done incrementally as to save how much disk space is actually used? If a rollback needed to be done, how long does this typically take? Is a rollback also instantaneous? Thanks!

    Read the article

  • Is there a way to create a copy-on-write copy of a directory?

    - by BCS
    I'm thinking of a situation where I would have something that creates a copy of a directory, tweaks a few files, and then does some processing on the result. This wold be done fairly often, maybe a few dozen times a day. (The exact use case is testing patch submissions; dupe the code, patch it, build/test/report/etc.) What I'm looking for could be done by creating a new directory structure and populating it with hard links from the origonal. However this only works if all the tools you use delete and recreate files rather than edit them in place. Is there a way to have the file system do copy-on-write for a file? Note: I'm aware that many FSs use COW at a block level (all updates are done via writes to new blocks) but this is not what I want.

    Read the article

  • 56.6 Modem with CallerID

    - by Fuod
    Does anyone still know anything about the 56.6 modems? I'm looking for one that is easy to access via C#/VB.Net, has Caller ID and is either low-profile or USB. Also that neat little feature that lets the modem block the call from the phone (pass-through) until it has received the CallerID info would be really nice! Obviously I could just go to Best Buy and get what they have but I have no way of knowing how friendly it would be to write code for and I don't want to make multiple trips returning/exchanging etc. I'm not going to be doing anything with voice or voice mail, just recording the number from CallerID. Thanks!

    Read the article

  • Iptables to lock down compromised server to a single ip

    - by ollybee
    I have a Linux server which is compromised, I can see nasty looking perl scripts executing with root privileges. I want to get some data off it before I wipe it. How can I block all inbound and outbound traffic except for my ip? It's a Centos server I assume i can do this with iptables? I'm aware a the server is rooted there is a possibility that attackers could have made changes on the server that would prevent this from working. Ill be testing to make sure and only have the server online for a couple of hours before it is nuked.

    Read the article

  • What kind of website traffic can a 10mpbs connection handle?

    - by Blankman
    I need some help understanding firewalls. I played around with Amazon EC2 and it seems to provide a firewall out-of-the-box. When I say firewall, to me that means the ability to block ports from being accessed from the outside world, or to only specific security groups. I'm looking at a dedicated server hosting provider and they provide a hardware firewall for $50/month and it is limited to 10mbps. Can someone explain to me what kind of traffic this correlates to? Are these usually limited to the number of simultaneous connections also?

    Read the article

  • Squid 2.7.6 not honoring ACL rules

    - by peppery
    Hello there, I have a /24 block of IP addresses assigned to a single server that I have been attempting to install Squid on an Ubuntu server machine. All of the IP addresses are set up correctly (aliases of eth0) in /etc/networking and work as they should be, using cURL I can specify an interface and it goes out on the correct address as it should be. I would like Squid to take the incoming IP address the request was sourced to and proxy the request out on the same IP (e.g incoming 123.123.123.1:3128 - 123.123.123.1, .2 - .2, etc) and have set up these ACL rules in /etc/squid.conf acl ip1 myip x.x.x.1 tcp_outgoing_address x.x.x.1 ip1 acl ip2 myip x.x.x.2 tcp_outgoing_address x.x.x.2 ip2 acl ip3 myip x.x.x.3 tcp_outgoing_address x.x.x.3 ip3 and so on, as this seems to be the only way to do what I want (from research). However, after much frustration, Squid seems to be ignoring these rules and sending requests out on the default interface. Does anybody have any suggestions? Thanks.

    Read the article

  • Redirect all ports to my server in a simple way

    - by Dorian
    I have a server with SSH access (on port 22 and 443). My ISP block everything except ports 80 and 443. I there a simple way to make everything go to my server (via SSH) then return the response via the same SSH connection, but in a way I can use all the ports in my client. Like : Me ? SSH connection ? My server ? request ? Server ? My server ? Me It's like a VPN but I don't have any port available for a VPN (443 is already taken by SSH).

    Read the article

  • Shrink NTFS Partition Windows 2003

    - by Coops
    We have an iSCSI target provided by a CentOS server attached to a Windows Server 2003 Standard box, formatted in NTFS. My question is this - I know we can resize the backend block device fine (LVM et al.), however how do you tell Windows the NTFS filesystem has shrunk afterwards? [note we want to shrink]. I'm imagining a world of pain if it's not done correctly! This is a production box, so ideally we'd like the process to keep the drive mounted and online during the process, but downtime can be scheduled if need be. 90% of what I've found on the subject so far basically involves using the 'ntfsresize' command in Linux to do the job -- but surely Windows can do this itself? Cheers!

    Read the article

  • Eclipse style autohotkey commands

    - by Ph4g3
    Is autohotkey capable of interpreting hotkeys in the style of Ctrl + Shift + W, W? I would assume a script like the following would work: ^+W:: ; Windows hotkeys (Ctrl + Shift + W) O:: Run Outlook ; Subsequent 'o' pressed => Run outlook E:: Run Explorer ; return From the documentation I note that these are called vertically stacked hotkeys and cause each line to perform the same action. In the case above, I think Ctrl+Shift+W and o will both cause outlook to be launched, whereas pressing e would cause explorer to be launched. What I would like is Ctrl+Shift+W, O runs outlook and Ctrl+Shift+W, e runs windows explorer. Is there any way to cause a hotkey to perform context specific actions (much like in Eclipse), where I can press Ctrl+Shift+W to activate a block of specific hotkeys?

    Read the article

  • What's a worthwhile test for a new HD?

    - by Michael Kohne
    I work for a company that uses standard 2.5" SATA HD's in our product. We presently test them by running the Linux 'badblocks -w' command on them when we get them - but they are 160 gig drives, so that takes like 5 hours (we boot parted magic onto a PC to do the scan). We don't actually build that many systems at a time, so this doable, but seriously annoying. Is there any research or anecdotal evidence on what a good incoming test for a hard drive should be? I'm thinking that we should just wipe them with all zeros, write out our image, and do a full drive read back. That would end up being only about 1 hour 45 minutes total. Given that drives do block remapping on their own, would what I've proposed show up any infant mortality just as well as running badblocks?

    Read the article

  • Vostro 1520 crash during bios update

    - by Deadmilkman
    My Vostro 1520 (P8700 C2D) originally came with BIOS A02. This bios version have known problems with VT, so I had to upgrade to A05. During the upgrade, the notebook crashed. Needless to say, it won't boot anymore. The simple question is: is there a way to access the bios boot block to recover the bad flash with a crisis disk? I know that the MINI and the ALIENWARE models have this feature, but I can't seem to find anything about it in the Vostro machines. Any help will be much appreciated. PS: Dell's solution is to change the motherboard, but it will take several days, as the board isn't available in my country :( Regards, Deadmilkman

    Read the article

  • iptables to allow input and output traffic to and from web server only

    - by Caedmon
    I have an Elastic Search server which seems to have been exploited (it's being used for a DDoS attack having had NO firewall for about a month). As a temporary measure while I create a new one I was hoping to block all traffic to and from the server which wasn't coming from or going to our web server. Will these iptables rules achieve this: iptables -I INPUT \! --src 1.2.3.4 -m tcp -p tcp --dport 9200 -j DROP iptables -P FORWARD \! --src 1.2.3.4 DROP iptables -P OUTPUT \! --src 1.2.3.4 DROP The first rule is tried and tested but obviously wasn't preventing traffic coming from my server to other IP addresses so I was hoping I could add the second two rules to full secure it.

    Read the article

  • Managing multiple ssh keys

    - by Mathijs Kwik
    I have a lot of ssh keys, they are all passphrase protected and managed by ssh-agent. As a result of this, I am now getting "Too many authentication failures" on some connections. As has been explained on this site before, this is because ssh will try all keys the agent throws at it. The proposed solution is to use IdentitiesOnly in the config, together with an IdentityFile. While this indeed stops offering wrong keys, it seems it completely disables the agent in full, so now I have to type the passphrase on every connection. I could not find clear info about this. Does IdentitiesOnly just disable getting keys from ssh-agent in full? Or should it just block out the keys that aren't mentioned? Thanks, Mathijs # here's my config ~% cat .ssh/config Host bluemote HostName some.host.com IdentitiesOnly yes IdentityFile /home/mathijs/.ssh/keys/bluebook_ecdsa # I had the key loaded into the agent, shown here ~% ssh-add -L ecdsa-sha2-nistp521 SOME_LONG_BASE64_NUMBER== /home/mathijs/.ssh/keys/bluebook_ecdsa # but it doesn't seem to get used ~% ssh bluemote Enter passphrase for key '/home/mathijs/.ssh/keys/bluebook_ecdsa':

    Read the article

  • Is there any IP which refers to the internet?

    - by victorferreira
    Hello, guys, good morning. 127.0.0.1 is the local IP, isnt it? Is there a IP that I can use in order to refer to the any user in the internet? The thing is: i want to block a specific file to be accessed by the internet using IIS6. but i doesnt show me a clear way to do this. But i can define some security rules, for example: give IP restrictions for some file. So, i can deny for everybody (using that IP i am asking about) and allow for the internal IP. any suggestions?

    Read the article

  • How to avoid loop limitation in a openvz container?

    - by mat.viguier
    On a openVZ containing Deb7 I need to lock the maximum size of a folder, which is used to upload on a php based web server. The directory is synced, so I have to lock the maxsize. MAXSIZE should be upgradable by adding some physical disk later ... I want to use a file as a block device for a file system. So I have done : dd if=/dev/zero of=/disk2/filesystem.dat bs=1M count=100 Then, I made the filesystem on it mkfs.ext4 filesystem.dat Then I tried to mount it : mkdir /opt/filesystem ; mount /disk2/filesystem.dat /opt/filesystem My OpenVZ (it is on a VPS) has no loop module in the kernerl. So I got Could not find any loop device as usual under OpenVz So i think I have to use FUSE, but I really do not know HOW .... Any idea on locking the size of directory under OpenVZ ?

    Read the article

  • /etc/hosts in Windows 8.1 doesnt work like in Windows 7 [on hold]

    - by user225438
    Last time when i installed Win7, i configured it to block some netbios names in LAN with hosts file. Something like this: 192.168.0.10 computer_name 192.168.0.10 computer_IP where 192.168.0.10 some ip-address in network, where user need to login to access it. So, when user trying to access computer_name via \\computer_name, he will redirect to 192.168.0.10 rather then going to computer_name. In Windows 8.1 I can't do this trick. I tried to disable Windows Defender, flushed DNS, nbtstat -R. Nothing works. When I pinging computer_name, IP address returning 192.168.0.10, but when I accessing it via explorer (\\computer_name\d$), it opening computer partitions. In Win7, when I trying to access \\computer_name, its trying to open 192.168.0.10 one. Maybe its not the best solution to do this, but it works in Windows 7.

    Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >