Search Results

Search found 16166 results on 647 pages for 'conexant high def audio'.

Page 149/647 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

  • Integrated webcam in lenovo t410 not working with 12.04

    - by kristianp
    I have a Lenovo T410 with an inbuilt webcam and I haven't been able to get the webcam working. I tried skype, cheese, both just give me a black window. The microphone works fine with skype, by the way. Can anyone provide any clues please? The webcam is enabled in the bios, but there is no light indicating the webcam is on (not sure if there should be, though). I tried this on Kubuntu 11.10 and have upgraded to 12.04 with the same results. The Fn-F6 keyboard combination doens't seem to do anything either. EDIT: I got the webcam replaced, it looks like it was a hardware problem, because it works fine now. Thanks guys. $ ls /dev/v4l/* /dev/v4l/by-id: usb-Chicony_Electronics_Co.__Ltd._Integrated_Camera-video-index0 /dev/v4l/by-path: pci-0000:00:1a.0-usb-0:1.6:1.0-video-index0 And lsusb: $ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 147e:2016 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 001 Device 004: ID 0a5c:217f Broadcom Corp. Bluetooth Controller Bus 001 Device 005: ID 17ef:480f Lenovo Integrated Webcam [R5U877] Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc. Bus 002 Device 004: ID 17ef:1003 Lenovo Integrated Smart Card Reader Here is the output from guvcview, minus lots of lines describing the available capture formats. It says "unable to start with minimum setup. Please reconnect your camera.". guvcview 1.5.3 ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } Time interval between frame: 1/30, .... { discrete: width = 1600, height = 1200 } Time interval between frame: 1/15, vid:17ef pid:480f driver:uvcvideo checking format: 1196444237 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! Init video returned -2 trying minimum setup ... video device: /dev/video0 Init. Integrated Camera (location: usb-0000:00:1a.0-1.6) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 640, height = 480 } .... vid:17ef pid:480f driver:uvcvideo checking format: 1448695129 libv4l2: error setting pixformat: Device or resource busy VIDIOC_S_FORMAT - Unable to set format: Device or resource busy Init v4L2 failed !! ERROR: Minimum Setup Failed. Exiting... VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22) cleaned allocations - 100% Closing portaudio ...OK Terminated.

    Read the article

  • Hardware and Software Working Together - What Does LJE say?

    - by Stephen Slade
     IDG News Service - Oracle CEO Larry Ellison said Oracle will continue to bet on selling high-end custom hardware for its software products, even amidst a growing trend toward roomfuls of cheap, generic servers. "You have to be in the hardware business and the software business, to get the best possible system," he said during a keynote speech at Oracle's OpenWorld conference in Tokyo. "We believe it's the right idea, we believe it's the next generation of computing, we believe all the pieces have to fit together." Ellison, as he has often done in the past, repeatedly referred to Apple as his "favorite example" of such tight integration. He was a close friend of Apple's co-founder Steve Jobs and previously served on Apple's board of directors.He said sales of Oracle's advanced servers were booming and generating around a billion dollars a year in revenue for the company, which has until recent years focused almost exclusively on its software offerings. With the explosion of popular online services and the increasing number of mobile devices that access them, demand is high for databases that can quickly respond to high numbers of relatively simple queries. While Oracle is pitching its expensive, finely-tuned machines to meet this requirement, Internet behemoths like Google, Facebook and Microsoft increasingly rely on armies of low-cost, easily replaceable servers. Ellison emphasized the high specifications of Oracle's servers, which come packed with multiple terabytes of RAM and flash-based storage for speed. Such machines are superior to large server farms, he said, because they require far less electricity and floor space, and are also cost competitive. When asked about whether purchasing such products would lock customers in to expensive hardware from Oracle, he promised that the company's software would always run on "multiple hardware sources."  Ellison, who spoke from Kyoto, Japan's ancient capital, was shown live online via webcast. The Oracle founder has a fondness for Japanese architecture and is staying in his large garden residence in the city Source: Ellison: Hardware-software integration key, Apple is best example. Oracle's founder and CEO reaffirmed his commitment to custom hardware for its software products  LINK to Computerworld article Apr 5, 2012 http://www.computerworld.com/s/article/9225858/Ellison_Hardware_software_integration_key_Apple_is_best_example?source=CTWNLE_nlt_entsoft_2012-04-09&utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+computerworld%2Fs%2Ffeed%2Ftopic%2F173+%28Computerworld+Databases+News%29#disqus_thread

    Read the article

  • Radeon Mobility HD 5470 Not Working

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Radeon Mobility HD 5470 Not Working on Ubuntu 10.10

    - by Promather
    I recently bought a new HP DV6-3118SA laptop, but I am having a very discouraging problem with the graphics card. The graphics card is Radeon Mobility HD 5470. It doesn't install by default, but I do get some message suggesting to install the driver. If I install that driver, the next time I reboot, the screen goes blank and that's it! The same happens if I install the proprietary driver (fglrx) from ATI website. Could you please help me with this? EDIT: Following @Ronald and @Oli advice, I am dumping the output of lspci -k: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) Kernel driver in use: pcieport Kernel modules: shpchp 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: i915 Kernel modules: i915 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Hewlett-Packard Company Device 144a 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: radeon Kernel modules: radeon 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 02:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe Subsystem: Hewlett-Packard Company Device 1453 Kernel driver in use: rt2800pci Kernel modules: rt2860sta, rt2800pci 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) Subsystem: Hewlett-Packard Company Device 144a Kernel driver in use: r8169 Kernel modules: r8169 7f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a 7f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Hewlett-Packard Company Device 144a

    Read the article

  • Indentify Codecs & Technical Information About Video Files

    - by DigitalGeekery
    Have you ever wanted to play an audio or video file but didn’t have the proper codec installed? Today we’ll show how to determine codecs, along with a host of other technical details about your media files with MediaInfo. Installation Download and install MediaInfo. You can find the download link at the bottom of the page. Note: When installing MediaInfo there is a recommended software bundle which you can opt out of by selecting Do not install option. Each recommended software choice may be different, like in this example it offers Spyware Terminator. The cool thing though is they use Open Candy which opts you out of the install. Just double check to make sure you’re not installing extra crapware. Using MediaInfo The first time you run MediaInfo it will display the Preferences window. There are various option such as language, output format, and whether or not you want MediaInfo to check for new versions. Click OK. Select a file or folder to analyze by clicking on the File or Folder icons on the left of the application window or by selecting File > Open from the menu. You can also drag and drop a file directly onto the application. MediaInfo will display details of your media file. In Basic view, you’ll see basic information. Notice in the example below the video and audio codecs, along with file size, running time of the media file, and even the application used to create the video file (Writing application).    You can switch to some of the other views by selecting View from the Menu and choosing form the dropdown list.   Sheet View will present the information a bit more clearly. You can see in the example below that the video and audio codec are listing in clearly identified columns. (AVC is often more commonly referred to H.264.)   Tree View is perhaps the most detailed. You can see from the example below the codec used for this AVI file is XviD.   Scrolling down even further you’ll see additional information like video and audio bit rates, frame rate, aspect ratio, and more.   In Basic View (and also in Sheet view) you can click to find a player for your file. In this instance with an MP4 file, it took me to the download page for Quicktime. This is by no means the only media player for this file, but if you are stuck for how to play a media file, this will forward you to a solution that works. You can do the same thing with Video codec. Click Go to the web site of this video codec to find a download.   MediaInfo is a simple but powerful tool that can be used to discover the details of a media file, or just to find a compatible codec. It works with most any video file type and is available for Windows, Mac, and Linux. Some Mac and Linux versions, however, are currently command line only. Download MediaInfo Similar Articles Productive Geek Tips How to Convert Videos to 3GP for Mobile PhonesFix for VLC Skipping and Lagging Playing High-Def Video FilesUsing VLC Player Under VistaUse Your Mac Mini as a Media Server Part 2How to Play .OGM Video Files in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

    Read the article

  • USB Flash not recognised by Windows and BIOS, but works fine in Linux

    - by bbalegere
    I have a Transcend JetFLash 2GB USB Drive.It was working fine and I had been using it occasionally. All of sudden it stopped working in all versions of Windows . The USB Drive is also not recognised by the BIOS.It does not show in the list of bootable devices.(It used show up in the list earlier) However the USB Drive works fine in my Linux Mint 11 OS. Running dmesg gives this [ 941.812192] usb 1-2: new high speed USB device using ehci_hcd and address 4 [ 941.936178] usb 1-2: device descriptor read/64, error -71 [ 942.164188] usb 1-2: device descriptor read/64, error -71 [ 942.380189] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 942.504138] usb 1-2: device descriptor read/64, error -71 [ 942.732179] usb 1-2: device descriptor read/64, error -71 [ 942.948154] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 943.364134] usb 1-2: device not accepting address 6, error -71 [ 943.476172] usb 1-2: new high speed USB device using ehci_hcd and address 7 [ 943.892140] usb 1-2: device not accepting address 7, error -71 [ 943.892191] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 944.296190] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 944.438251] usb 2-2: not running at top speed; connect to a high speed hub [ 944.709928] usbcore: registered new interface driver uas [ 944.729999] Initializing USB Mass Storage driver... [ 944.730509] scsi6 : usb-storage 2-2:1.0 [ 944.730908] usbcore: registered new interface driver usb-storage [ 944.730917] USB Mass Storage support registered. [ 945.736320] scsi 6:0:0:0: Direct-Access JetFlash Transcend 2GB 8.07 PQ: 0 ANSI: 2 [ 945.744547] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 945.753316] sd 6:0:0:0: [sdb] 3944448 512-byte logical blocks: (2.01 GB/1.88 GiB) [ 945.758274] sd 6:0:0:0: [sdb] Write Protect is off [ 945.758288] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 [ 945.765167] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.765181] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 945.784309] sd 6:0:0:0: [sdb] No Caching mode page present [ 945.784323] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.239512] sdb: sdb1 [ 946.257279] sd 6:0:0:0: [sdb] No Caching mode page present [ 946.257292] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 946.257302] sd 6:0:0:0: [sdb] Attached SCSI removable disk Looks like there is something wrong the USB Drive.It is not recognised in any computer running Windows. Is there any way to fix this? Any idea why this problem occurred ?

    Read the article

  • SEO Techniques to Be Used by Every Website

    Search engine optimization is the buzz word in the world of internet. Every website wants to rank high in the search engine listings. There are different techniques and measures that you can take up for the process of search engine optimization. Here are some sure shot techniques that every website should apply in order to rank high.

    Read the article

  • Convert old AVI files to a modern format

    - by iWerner
    Hi, we have a collection of old home videos that were saved in AVI format a long time ago. I want to convert these files to a more modern format because the Totem Movie Player that comes with Ubuntu 10.4 seems to be the only program capable of playing them. The files seem to be encoded with a MJPEG codec, and playing them in VLC or Windows Media Player plays only the sound but there is no video. Avidemux was able to open the files, but the quality of the video is severely degraded: The video skips frames and is interlaced (it's not interlaced when playing it in Totem). Neither ffmpeg nor mencoder seems to be able to read the video stream. mencoder reports that it is using ffmpeg's codec. Here's a section from its output: ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family [mjpeg @ 0x92a7260]mjpeg: using external huffman table [mjpeg @ 0x92a7260]mjpeg: error using external huffman table, switching back to internal Unsupported PixelFormat -1 Selected video codec: [ffmjpeg] vfm: ffmpeg (FFmpeg MJPEG) while running ffmpeg produces the following: $ ffmpeg -i input.avi output.avi FFmpeg version SVN-r0.5.1-4:0.5.1-1ubuntu1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.1-1ubuntu1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Mar 4 2010 12:35:30, gcc: 4.4.3 [avi @ 0x87952c0]non-interleaved AVI Input #0, avi, from 'input.avi': Duration: 00:00:15.24, start: 0.000000, bitrate: 22447 kb/s Stream #0.0: Video: mjpeg, yuvj422p, 720x544, 25 tbr, 25 tbn, 25 tbc Stream #0.1: Audio: pcm_s16le, 44100 Hz, stereo, s16, 1411 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 720x544, q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream #0.1: Audio: mp2, 44100 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #0.1 -> #0.1 Press [q] to stop encoding frame= 0 fps= 0 q=0.0 Lsize= 143kB time=15.23 bitrate= 76.9kbits/s video:0kB audio:119kB global headers:0kB muxing overhead 20.101777% So the problem is that output does not contain any video, as evidenced by the video:0kB at the end. In all of the above cases the audio comes out fine. So my question is: What can I do to convert these files to a more modern format with more modern codecs?

    Read the article

  • Disaster, or Migration?

    - by Rob Farley
    This post is in two parts – technical and personal. And I should point out that it’s prompted in part by this month’s T-SQL Tuesday, hosted by Allen Kinsel. First, the technical: I’ve had a few conversations with people recently about migration – moving a SQL Server database from one box to another (sometimes, but not primarily, involving an upgrade). One question that tends to come up is that of downtime. Obviously there will be some period of time between the old server being available and the new one. The way that most people seem to think of migration is this: Build a new server. Stop people from using the old server. Take a backup of the old server Restore it on the new server. Reconfigure the client applications (or alternatively, configure the new server to use the same address as the old) Make the new server online. There are other things involved, such as testing, of course. But this is essentially the process that people tell me they’re planning to follow. The bit that I want to look at today (as you’ve probably guessed from my title) is the “backup and restore” section. If a SQL database is using the Simple Recovery Model, then the only restore option is the last database backup. This backup could be full or differential. The transaction log never gets backed up in the Simple Recovery Model. Instead, it truncates regularly to stay small. One that’s using the Full Recovery Model (or Bulk-Logged) won’t truncate its log – the log must be backed up regularly. This provides the benefit of having a lot more option available for restores. It’s a requirement for most systems of High Availability, because if you’re making sure that a spare box is up-and-running, ready to take over, then you have to be interested in the logs that are happening on the current box, rather than truncating them all the time. A High Availability system such as Mirroring, Replication or Log Shipping will initialise the spare machine by restoring a full database backup (and maybe a differential backup if available), and then any subsequent log backups. Once the secondary copy is close, transactions can be applied to keep the two in sync. The main aspect of any High Availability system is to have a redundant system that is ready to take over. So the similarity for migration should be obvious. If you need to move a database from one box to another, then introducing a High Availability mechanism can help. By turning on the Full Recovery Model and then taking a backup (so that the now-interesting logs have some context), logs start being kept, and are therefore available for getting the new box ready (even if it’s an upgraded version). When the migration is ready to occur, a failover can be done, letting the new server take over the responsibility of the old, just as if a disaster had happened. Except that this is a planned failover, not a disaster at all. There’s a fine line between a disaster and a migration. Failovers can be useful in patching, upgrading, maintenance, and more. Hopefully, even an unexpected disaster can be seen as just another failover, and there can be an opportunity there – perhaps to get some work done on the principal server to increase robustness. And if I’ve just set up a High Availability system for even the simplest of databases, it’s not necessarily a bad thing. :) So now the personal: It’s been an interesting time recently... June has been somewhat odd. A court case with which I was involved got resolved (through mediation). I can’t go into details, but my lawyers tell me that I’m allowed to say how I feel about it. The answer is ‘lousy’. I don’t regret pursuing it as long as I did – but in the end I had to make a decision regarding the commerciality of letting it continue, and I’m going to look forward to the days when the kind of money I spent on my lawyers is small change. Mind you, if I had a similar situation with an employer, I’d do the same again, but that doesn’t really stop me feeling frustrated about it. The following day I had to fly to country Victoria to see my grandmother, who wasn’t expected to last the weekend. She’s still around a week later as I write this, but her 92-year-old body has basically given up on her. She’s been a Christian all her life, and is looking forward to eternity. We’ll all miss her though, and it’s hard to see my family grieving. Then on Tuesday, I was driving back to the airport with my family to come home, when something really bizarre happened. We were travelling down the freeway, just pulled out to go past a truck (farm-truck sized, not a semi-trailer), when a car-sized mass of metal fell off it. It was something like an industrial air-conditioner, but from where I was sitting, it was just a mass of spinning metal, like something out of a movie (one friend described it as “holidays by Michael Bay”). Somehow, and I’m really don’t know how, the part of it nearest us bounced high enough to clear the car, and there wasn’t even a scratch. We pulled over the check, and I was just thanking God that we’d changed lanes when we had, and that we remained unharmed. I had all kinds of thoughts about what could’ve happened if we’d had something that size land on the windscreen... All this has drilled home that while I feel that I haven’t provided as well for the family as I could’ve done (like by pursuing an expensive legal case), I shouldn’t even consider that I have proper control over things. I get to live life, and make decisions based on what I feel is right at the time. But I’m not going to get everything right, and there will be things that feel like disasters, some which could’ve been in my control and some which are very much beyond my control. The case feels like something I could’ve pursued differently, a disaster that could’ve been avoided in some way. Gran dying is lousy of course. An accident on the freeway would have been awful. I need to recognise that the worst disasters are ones that I can’t affect, and that I need to look at things in context – perhaps seeing everything that happens as a migration instead. Life is never the same from one day to the next. Every event has a before and an after – sometimes it’s clearly positive, sometimes it’s not. I remember good events in my life (such as my wedding), and bad (such as the loss of my father when I was ten, or the back injury I had eight years ago). I’m not suggesting that I know how to view everything from the “God works all things for good” perspective, but I am trying to look at last week as a migration of sorts. Those things are behind me now, and the future is in God’s hands. Hopefully I’ve learned things, and will be able to live accordingly. I’ve come through this time now, and even though I’ll miss Gran, I’ll see her again one day, and the future is bright.

    Read the article

  • Best way to render card images

    - by user1065145
    I have high-quality SVG card images, but they drastically lose their quality when I downsize them. I have tried two ways of rendering cards (using Inkscape and Imagemagics): 1) Render SVG to high-res PNG and resize it then; 2) Render SVG to image of proper size at once. Both approaches generate blurry card images, which looks even worse than old Windows cards. What are the best way to generate smaller card images from SVG sources and not to loose their quality a lot?

    Read the article

  • OVERVIEW ORACLE SALES PLAYS

    - by michaela.seika(at)oracle.com
    As an EMEA VAD partner, please update your knowledge on Oracle's Hardware and Software Solutions. Please join us at one of the following WebConferences and sent us a short mail for your registration: Tuesday, 15. February 2011 Sales Play 1: Overview of the High Impact Sales Plays - SALES Thursday, 17. February 2011 Sales Play 2: High Impact Sales Plays - TECHNICAL Further information: Database Application Acceleration with Flash Storage  Oracle's Sun Hardware Solutions

    Read the article

  • Artec TV18R Tuner not working :(

    - by Antillar Maximus
    Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

    Read the article

  • lowering the use of the memory controller in OpenCL based applications

    - by user827992
    With my first experiments I noticed that OpenCL is a good technology but often hampered by the X86 architecture and finding a mid-range VGA driven by a low-end chipset is not that unusual in the real world scenarios, sometimes this can happen with some high-end VGA too. Are there some caching techniques? Something that can bypass this inconvenience in some ways. The amount of dedicated memory on today's VGA is usually high, it's possible to use this memory to create some kind of buffer with instructions.

    Read the article

  • APress Deal of the Day 4/Jan/2011 - Pro SQL Server 2008 Mirroring

    - by TATWORTH
    Todays Apress $10 deal of the day at http://www.apress.com/info/dailydeal is "Pro SQL Server 2008 Mirroring is your complete guide to planning, using, deploying, and maintaining database mirroring as a high-availability option. Mirroring protects you by maintaining one or more duplicate copies of your database for use in the event the primary copy is damaged. It is a key component of any production-level, high-availability solution. This book covers the full spectrum of database mirroring, taking you from the planning phase through the implementation to the maintenance phase and beyond."

    Read the article

  • Why does my Messaging Menu code not work when split into functions?

    - by fluteflute
    Below are two python programs. They're exactly the same, except for one is split into two functions. However only the one that's split into two functions doesn't work - the second function doesn't work. Why would this be? Note the code is taken from this useful blog post. Without functions (works): import gtk def show_window_function(x, y): print x print y # get the indicate module, which does all the work import indicate # Create a server item mm = indicate.indicate_server_ref_default() # If someone clicks your server item in the MM, fire the server-display signal mm.connect("server-display", show_window_function) # Set the type of messages that your item uses. It's not at all clear which types # you're allowed to use, here. mm.set_type("message.im") # You must specify a .desktop file: this is where the MM gets the name of your # app from. mm.set_desktop_file("/usr/share/applications/nautilus.desktop") # Show the item in the MM. mm.show() # Create a source item mm_source = indicate.Indicator() # Again, it's not clear which subtypes you are allowed to use here. mm_source.set_property("subtype", "im") # "Sender" is the text that appears in the source item in the MM mm_source.set_property("sender", "Unread") # If someone clicks this source item in the MM, fire the user-display signal mm_source.connect("user-display", show_window_function) # Light up the messaging menu so that people know something has changed mm_source.set_property("draw-attention", "true") # Set the count of messages in this source. mm_source.set_property("count", "15") # If you prefer, you can set the time of the last message from this source, # rather than the count. (You can't set both.) This means that instead of a # message count, the MM will show "2m" or similar for the time since this # message arrived. # mm_source.set_property_time("time", time.time()) mm_source.show() gtk.mainloop() With functions (second function is executed but doesn't actually work): import gtk def show_window_function(x, y): print x print y # get the indicate module, which does all the work import indicate def function1(): # Create a server item mm = indicate.indicate_server_ref_default() # If someone clicks your server item in the MM, fire the server-display signal mm.connect("server-display", show_window_function) # Set the type of messages that your item uses. It's not at all clear which types # you're allowed to use, here. mm.set_type("message.im") # You must specify a .desktop file: this is where the MM gets the name of your # app from. mm.set_desktop_file("/usr/share/applications/nautilus.desktop") # Show the item in the MM. mm.show() def function2(): # Create a source item mm_source = indicate.Indicator() # Again, it's not clear which subtypes you are allowed to use here. mm_source.set_property("subtype", "im") # "Sender" is the text that appears in the source item in the MM mm_source.set_property("sender", "Unread") # If someone clicks this source item in the MM, fire the user-display signal mm_source.connect("user-display", show_window_function) # Light up the messaging menu so that people know something has changed mm_source.set_property("draw-attention", "true") # Set the count of messages in this source. mm_source.set_property("count", "15") # If you prefer, you can set the time of the last message from this source, # rather than the count. (You can't set both.) This means that instead of a # message count, the MM will show "2m" or similar for the time since this # message arrived. # mm_source.set_property_time("time", time.time()) mm_source.show() function1() function2() gtk.mainloop()

    Read the article

  • Take the Oracle Database Assessment for Midsize Businesses and Enterprise Departments

    - by David Swanger
    Midsize businesses and enterprise departments often face the dual challenge of having to ensure 24x7 availability while operating with limited resources.  Take this assessment to see how your organization stacks up in terms of simplicity, reliability, and affordability.  And find out how the Oracle Database Appliance helps midsize businesses balance the challenge of high availability and limited resources by simplifying deployment, maintenance, and support of high-availability database workloads. Visit this link to take the assessment: http://www.oracle.com/us/media/survey/index-dbapp-1518659.html

    Read the article

  • Your Way to Increase Your Website PageRank

    As a rule, the importance and relevance of your website page for a given keyword are depending on all the other sites that link to you and their respective PageRank. So you have to build many links from high PageRank sites and relevant to your site theme to gain the high ranking web page on the internet, these links are also referred to as backlinks.

    Read the article

  • Article Submission - A Crucial Tool For SEO

    Article creation and submission is a powerful tool for getting back-links in SEO. While it helps in maximizing the number of back-links a site has, also it helps in attaining high PR for the targeted page. One can submit article to various article directories. High PR article directories are generally preferred for submission.

    Read the article

  • Best Strategy on How to Choose a Good Keyword For SEO on Your Website

    The secrets to success is consistent with the right choice of keyword. With the correct SEO Phrases, your sites will be well search engine optimized. This means that when people search for the keyword, your web pages will be high on search engines. Internet users go for sites which are high on the list of results and so the better visibility will also increase their sales.

    Read the article

  • Drivers for Atheros AR928X?

    - by Pato7
    I am new in Ubuntu and I had a big trouble with wifi. My ubuntu 12.10 doesn't detect my wifi card and I can't toggle the "activate wireless" option on the tasks bar (it is grey). I searched for drivers to make it work, but nothing worked for me. Can anyone give me a hand? Many thanks in advanced! lspci output 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] 01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV710/730 HDMI Audio [Radeon HD 4000 series] 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8057 PCI-E Gigabit Ethernet Controller (rev 10) 03:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01) 0c:03.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 0c:03.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 0c:03.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) lshw -c network output *-network descripción: Ethernet interface producto: 88E8057 PCI-E Gigabit Ethernet Controller fabricante: Marvell Technology Group Ltd. id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: eth0 versión: 10 serie: 00:24:be:83:b2:4f tamaño: 100Mbit/s capacidad: 1Gbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=sky2 driverversion=1.30 duplex=full ip=192.168.1.123 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s recursos: irq:45 memoria:d3520000-d3523fff ioport:c000(size=256) memoria:d3500000-d351ffff *-network DESACTIVADO descripción: Interfaz inalámbrica producto: AR928X Wireless Network Adapter (PCI-Express) fabricante: Atheros Communications Inc. id físico: 0 información del bus: pci@0000:03:00.0 nombre lógico: wlan0 versión: 01 serie: 2c:81:58:e6:b6:03 anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.5.0-18-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:d2100000-d210ffff rfkill list all output 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: yes 1: sony-wifi: Wireless LAN Soft blocked: yes Hard blocked: no

    Read the article

  • Bounding Box Collision Glitching Problem (Pygame)

    - by Ericson Willians
    So far the "Bounding Box" method is the only one that I know. It's efficient enough to deal with simple games. Nevertheless, the game I'm developing is not that simple anymore and for that reason, I've made a simplified example of the problem. (It's worth noticing that I don't have rotating sprites on my game or anything like that. After showing the code, I'll explain better). Here's the whole code: from pygame import * DONE = False screen = display.set_mode((1024,768)) class Thing(): def __init__(self,x,y,w,h,s,c): self.x = x self.y = y self.w = w self.h = h self.s = s self.sur = Surface((64,48)) draw.rect(self.sur,c,(self.x,self.y,w,h),1) self.sur.fill(c) def draw(self): screen.blit(self.sur,(self.x,self.y)) def move(self,x): if key.get_pressed()[K_w] or key.get_pressed()[K_UP]: if x == 1: self.y -= self.s else: self.y += self.s if key.get_pressed()[K_s] or key.get_pressed()[K_DOWN]: if x == 1: self.y += self.s else: self.y -= self.s if key.get_pressed()[K_a] or key.get_pressed()[K_LEFT]: if x == 1: self.x -= self.s else: self.x += self.s if key.get_pressed()[K_d] or key.get_pressed()[K_RIGHT]: if x == 1: self.x += self.s else: self.x -= self.s def warp(self): if self.y < -48: self.y = 768 if self.y > 768 + 48: self.y = 0 if self.x < -64: self.x = 1024 + 64 if self.x > 1024 + 64: self.x = -64 r1 = Thing(0,0,64,48,1,(0,255,0)) r2 = Thing(6*64,6*48,64,48,1,(255,0,0)) while not DONE: screen.fill((0,0,0)) r2.draw() r1.draw() # If not intersecting, then moves, else, it moves in the opposite direction. if not ((((r1.x + r1.w) > (r2.x - r1.s)) and (r1.x < ((r2.x + r2.w) + r1.s))) and (((r1.y + r1.h) > (r2.y - r1.s)) and (r1.y < ((r2.y + r2.h) + r1.s)))): r1.move(1) else: r1.move(0) r1.warp() if key.get_pressed()[K_ESCAPE]: DONE = True for ev in event.get(): if ev.type == QUIT: DONE = True display.update() quit() The problem: In my actual game, the grid is fixed and each tile has 64 by 48 pixels. I know how to deal with collision perfectly if I moved by that size. Nevertheless, obviously, the player moves really fast. In the example, the collision is detected pretty well (Just as I see in many examples throughout the internet). The problem is that if I put the player to move WHEN IS NOT intersecting, then, when it touches the obstacle, it does not move anymore. Giving that problem, I began switching the directions, but then, when it touches and I press the opposite key, it "glitches through". My actual game has many walls, and the player will touch them many times, and I can't afford letting the player go through them. The code-problem illustrated: When the player goes towards the wall (Fine). When the player goes towards the wall and press the opposite direction. (It glitches through). Here is the logic I've designed before implementing it: I don't know any other method, and I really just want to have walls fixed in a grid, but move by 1 or 2 or 3 pixels (Slowly) and have perfect collision without glitching-possibilities. What do you suggest?

    Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >