Search Results

Search found 4726 results on 190 pages for 'ram jaiswal'.

Page 149/190 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

  • 12.04 Booting into Terminal

    - by user170796
    To preface this, I would like to say that I am completely new to Ubuntu and have essentially zero programming experience/experience working with command line and terminal. I installed Ubuntu because I would like to get into programming. If you could provide me with the simplest instructions possible, I would be grateful. I have a Lenovo Ideapad Y500 (Intel i7, NVidia GT 750m, 1TB HDD, 16GB SSD cache, 8GB RAM) with Windows 8 on it. Using a Live CD, I installed Ubuntu 12.04 onto a 75 GB partition. During the installation, I kept all default settings except for one thing; I decided to encrypt my home folder, and so checked the corresponding box. The installation completed, and I restarted. Once I restarted, I saw the options "Ubuntu, with Linux 3.2.0-23-generic" "Ubuntu, with Linux 3.2.0-23-generic (recovery mode)" "Memory test (memtest86+)" "Memory test (memtest86+, serial console 115200)" "Windows Recovery Environment (loader) (on /dev/sdb3)" "Windows 8 (loader) (on /dev/sdb5)" "System Setup" I chose the first option, and was directed to a screen with the Ubuntu logo and the row of five dots below that change from orange to white. Then, I was brought to a full screen terminal that prompted me to login, which I did. I saw no option to boot into GUI at all, and am lost. I've been searching around and have tried the "startx" command to no avail. Should the command have some sort of context or something? I've also tried selecting the recovery mode option from the boot manager. I've tried the resume option from the following menu, which eventually just shuts down the computer after displaying a lot of scrolling text that's too fast for me to read. I've also tried the failsafex mode from the recovery mode menu, which only brings up a terminal box at the bottom of the window that covers the entire bottom part of the screen. Commands won't work in this window. When I try to access Windows 8, I get a message saying that the EFI file path was not specified or something along those lines. I had to enable Secure Boot in order to access Windows 8 (I had disabled it to be able to boot from the Live CD), which is functioning normally. I am at a complete loss for what to do. Any help will be extremely appreciated. EDIT: Bonus question! If you could figure out a way for me to boot to Windows 8 without having to enable Secure Boot, it would save me a lot of trouble. I can deal with switching every time, but I'd rather not have to.

    Read the article

  • Why is firefox 4 not HW accelerated?

    - by acidzombie24
    At first i thought it was my computer but then i tried chrome. Why isnt firefox not hardware accelerated? The first screenshot shows chrome at 23% usage. The 2nd shows 59%. I have 2 cpus which is why it isnt 100% usage. The game pictured is biolab Heres the text for about:support Application Basics Name Firefox Version 4.0 User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:2.0) Gecko/20100101 Firefox/4.0 Profile Directory Open Containing Folder Enabled Plugins about:plugins Build Configuration about:buildconfig Extensions Name Version Enabled ID Modified Preferences Name Value accessibility.typeaheadfind.flashBar 0 browser.places.importBookmarksHTML false browser.places.smartBookmarksVersion 2 browser.startup.homepage_override.buildID 20110303194838 browser.startup.homepage_override.mstone rv:2.0 extensions.lastAppVersion 4.0 gfx.font_rendering.directwrite.enabled true network.cookie.prefsMigrated true places.history.expiration.transient_current_max_pages 127602 privacy.sanitize.migrateFx3Prefs true Graphics Adapter Description Mobile Intel(R) 4 Series Express Chipset Family Vendor ID 8086 Device ID 2a42 Adapter RAM Unknown Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32 Driver Version 8.15.10.2202 Driver Date 8-25-2010 Direct2D Enabled true DirectWrite Enabled true (6.1.7600.16385, font cache n/a) WebGL Renderer Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.541) GPU Accelerated Windows 1/1 Direct3D 10

    Read the article

  • Dell VRTX - slow cluster shared storage

    - by NorbyTheGeek
    I have a brand new Dell VRTX box set up as a Failover Cluster running HA Hyper-V virtual machines. This is my first time setting up clustering, and my first time with one of these boxes, so I'm sure I've missed something. The virtual machines are experiencing high disk latency and bad performance when accessing their VHD(x) files located on a Cluster Shared Volume. The VRTX has 10 x 900 GB 10K SAS drives in RAID 6 configuration, and the VRTX has the redundant Shared PERC 8 controllers. Both blades have full access to the virtual disks. There are two M520 blades installed, each with 128 GB RAM. MPIO is configured for the PERC 8 controllers. Operating system on the blades is Server 2012 (NOT R2). The RAID 6 array is split into a small (8 GB) volume for cluster quorum witness and a large (6.5 TB) volume for a Cluster Shared Volume (mounted on the nodes as C:\ClusterStorage\Volume1) An example of slow disk access: logging into a Server 2012 VM and having Server Manager come up automatically. Disk access goes to 100%, with write speeds at 20 MB or so, read speeds of 500 KB or so, and Average Response Time of over 1000 ms, sometimes spiking at 4000-5000 ms or so. It's the latency that really worries me. Is there something specific I should look at in my configuration? It doesn't seem to matter whether I use VHD or VHDX, dynamic or static.

    Read the article

  • Varnish 3.0.2 and ISPConfig 3.0.4

    - by Warren Bullock III
    I followed the tutorial The Perfect Server - Ubuntu 11.10 [ISPConfig 3] here. I'm running an Ubuntu 11.04 (Natty Narwhal) server with 1024 RAM on Rackspace. I've gone through and updated to ISPConfig 3.0.4. Everything has been working great up to now when I decided to try and install Varnish. Initially I did an install of Varnish by issuing: apt-get update apt-get upgrade apt-get install varnish Apparently the version that was installed was Varnish 2.x so I went back and added the repositories for packages provided by varnish-cache.org curl http://repo.varnish-cache.org/debian/GPG-key.txt | apt-key add - echo "deb http://repo.varnish-cache.org/ubuntu/ lucid varnish-3.0" >> /etc/apt/sources.list apt-get update apt-get install varnish This updated my version of Varnish to 3.0.2 I then proceeded to make the following changes: vim /etc/default/varnish change DAEMON_OPTS to port 80: vim /etc/apache2/ports.conf NameVirtualHost *:8000 Listen 8000 vim /etc/apache2/sites-available/default <VirtualHost *:8000> vim /etc/apache2/sites-available/ispconfig.vhost Listen 8080 NameVirtualHost *:8080 <VirtualHost _default_:8080> I then proceeded to set my other vhosts to use 8000 (the apache2 port) so with all this set I reset both Apache2 and Varnish to test. I used Firebug in Firefox 11.0 The output from what I see doesn't seem to indicate that Varnish is working completely correct: First of all I see: X-Varnish 1644834493 but I've heard that unless you have two timestamps side by side than it's probably not working correctly so for example I was thinking I might see something like: X-Varnish 1644834493 1644837493 Also if I noticed this in the output which seems to be inconstant: X-Drupal-Cache MISS There are times when it will say HIT as well.... So the question here that I have is I think Varnish is partially working, however, why don't I see two timestamps on X-Varnish like I'm thinking I should and does the output of the screenshot I have look correct? If Varnish isn't working can someone tell me what I might being doing wrong? Thanks in advance.

    Read the article

  • Setting up Tomcat6 properly in Ubuntu 10.04

    - by aasukisuki
    We have a Tomcat6 instance running on Ubuntu 10.04LTS. Our test box was just a Windows machine running Tomcat6. Both machines (Linux and Windows) have 1GB of ram. Via the Tomcat configuration tool in windows, I was able to set the min/max/permgen sizes of the JVM. Those were set to 256/512/128 respectively. Now on the Ubuntu box, I've tried setting the JVM options in several different places including: Adding JAVA_OPTS & CATALINA_OPTS in /etc/environment Adding JAVA_OPTS in $CATALINA_HOME/bin/catalina.sh Creating setenv.sh and adding JAVA_OPTS in $CATALINA_HOME/bin Adding JAVA_OPTS directly to /etc/init.d/tomcat6 Un-commenting the JAVA_OPTS and modifying it in /etc/default/tomcat6 Nearly all of those methods did not work, except for modifying /etc/init.d/tomcat6 directly (and possibly the /etc/default/tomcat6 change, but I just did that). However, my understanding is that when you change these settings, only one JVM should be used for the entire tomcat6 instance, and that memory is shared among the applications. On our windows box, tomcat6 is run as a service, and appears to behave this way. However, when I look at htop on the linux box, there are 20+ tomcat6 instances (I have an app that triggers internal jobs every X seconds using chron, so maybe these are threads? Or are they actual instances) all with those memory settings. The app runs fine for a bit, but eventually ends up locking up. I'm guessing each of these apps thinks it has 512m to work with and never GC's and then locks tomcat up completely. What is the proper way to set all of this up?

    Read the article

  • Managing scalability and availability with two servers running Apache Httpd, Apache Mina and MySQL

    - by celalo
    Hello, I am not a developer and I don't much experience with scalable server architectures. But I am in need of a highly available and scalable system for one of my projects. There is going to be two servers I am going to use for the time being. Both with 4 core CPUs and 8 GB RAM with RAID structures running CentOS 5.4. I will also have feature called "Failover IP" which enables to direct an IP address to another server within short time. The applications which will be run on the servers: There is going to be a Java application based on Apache Mina server for handling TCP requests from some hundreds of network devices where the devices are going to send request as much as one request per minute. Handling those requests, includes parsing the requests and inserting a few rows to the Database. Parsing requests before inserting data to the DB does take neglectable time. There is going to be MySQL server, as I stated above. Also there is going to be a PHP web application running on Apache Httpd Server which uses the same DB with the Java application. What I wish to have is to make use of those two servers at the most. I was imagining to have the servers identical, sharing the work load. MySQL could be a cluster maybe? And if some application fails or the whole machine goes down, the other will continue serving the requests seamlessly. Reminding that a "Failover IP" feature will be available for me to take advantage of. Also, It should be kept in mind that number of servers could increase in time, to meet the demand. What can you suggest? Which kind of tools I can make use of? Which kind of monitoring software (paid/unpaid) I have? Thanks in advance.

    Read the article

  • BIOS interrupts, privilege levels and paging

    - by Jack
    Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only address RAM? Next thing I don't understand is about privilege levels. I know about ring model, and access rights, but how does the CPU know which privilege level has executed an instruction? I think that these privileges apply only when intruction is trying to address memory, but how does an application get its privilege level? I mean I know its level 3, but how is it set? And last thing, I know that paging is address scheme that is used to support aplication-transparent virtual memory, or swapping, but I could not find any information about how paging is tied with protected mode. Like if paging is like next mode independent of protected mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first address application space, then offset, and then paging folder, page and offset once again?

    Read the article

  • i5 540M or i7 720QM for laptop running VMs and software development tools?

    - by Donald Hughes
    I'm a software developer that would primarily be running Windows 7 as the primary operating system. On a typical day, I might, at any given moment, be running Visual Studio, Expression Web, SQL Server developer (and Management Console), IIS, Photoshop, a dozen browser tabs in 2-3 different browsers, Skype video chat, streaming music, and a couple of VMs (WinXP and Ubuntu) for testing/experimentation. Obviously, RAM is a concern, which is why I plan to use 8 GB so I can devote enough to the VMs to be usable. I'm also tempted to use an ExpressCard SSD for storing the VM disks to ease disk contention. And I know that that is asking a lot from a laptop, and I should just use a desktop, but I need to be able to take my work with me between several locations. It seems that at a reasonable price point, it comes down to the i5 540M versus the i7 720QM. I'm leaning toward the i7 since it would allow me to dedicate a whole hyperthreaded core to each VM, and still have two cores left for the primary OS. I've heard that the i5 has better battery life, but I'm curious for my scenario if there would be a meaningful difference. I don't usually work without a plug, but I do occasionally ride the train or fly and it would be nice to have at least 3 hours of juice for unusual circumstances. And, finally, for this usage scenario, would a dedicated video option be preferred over the i5's integrated video? It sounds like Visual Studio 2010 (and Windows 7) can take advantage of the video card.

    Read the article

  • AclPermissionsFacet fault install SQL-2008-R2

    - by photo_tom
    While attempting to do an installation repair of SQL-2008R2, I'm failing the pre-check rules. Module that is failing is AclPermissionsFacet - with this message "The SQL Server registry keys from a prior installation cannot be modified. To continue, see SQL Server Setup documentation about how to fix registry keys." In the log file "Detail_GlobalRules.txt", I've been able to find the following error messages - 2010-09-05 07:24:39 Slp: Could not open sub key key HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSearch. 2010-09-05 07:24:39 Slp: Could not open sub key key HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSSQL10.MSSQLSERVER\SQLServerSCP. 2010-09-05 07:24:39 Slp: Could not open sub key key HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQLServer. 2010-09-05 07:24:39 Slp: Could not open sub key key HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\MSSQL10.MSSQLSERVER\SQLServerAgent. When I look at these keys in the registry, all of their permissions are blank. My problem is that I cannot find any good information on how to reset these keys. This is on my new home dev and I think during the migration from my previous machine, these settings got corrupted on my new box. In reviewing the web, there doesn't seem to be good infomration. And what there is suggests using subinacl.exe. But after trying it and seeing it is an XP based program, I'm at a loss on how to continue. Configuration - Windows 7/64bit Home Edition, SQL2008R2, 6gb ram. Suggestions? Su

    Read the article

  • BIOS interrupts, priviledge levels and paging

    - by Jack
    Hi, I was learning about Intel 8086-80486 CPUs and their interactions with HW. But I still don´t understand it quite well. Please, help me fill blank spots. First, I know that CPU communicates with HW using BIOS interrupts. But, what really happens in PC, when I call some INT instruction? I know that according the interrupt table some instructions begin to execute, but how by executing some instructions can BIOS recognize what I want to do? Becouse as far as I know, CPU has no extra communication channel with BIOS, it can only adress memory and receive data. So how can I instruct BIOS to do something, when I can only adress RAM? Next thing I dont understand is about priviledge levels. I know about ring model, and acess rights, but how CPU knows which priviledge level has executed instruction? I think that these priviledges apply only when intruction is trying to adress memory, but how applications gets its priviledge level? I mean I know its level 3, but how its set? And last thing, I know that paging is adress scheme that is used to support aplication-transparent virtual memory, or swaping, but I could not find any informations about how is paging tied with protected mode. Like if paging is like next mode independent of protectet mode, or its somehow implemented within protected mode. And if it is implemented in protected mode, isn´t it too slow, to first adress application space, than offset, and than paging folder, page and offset once again? Thank you for every response.

    Read the article

  • Primary IDE Channel: Ultra DMA Mode 5 >> PIO Mode

    - by Wesley
    Hi, my netbook was having huge audio lag and just abnormally slow processing. After doing some searching on the internet, I found out that I needed to uninstall/reinstall the Primary IDE Channel found under the IDE controller section in the Device Manager. I would then set the Transfer Mode to DMA if available and everything would be great. For a period of time, I would see that "Ultra DMA Mode 5" was the current transfer mode, but every so often, it'd revert back to "PIO Mode", which is when it's really laggy. What can I do to prevent the Primary IDE Channel to revert from Ultra DMA Mode to PIO Mode? Also, my netbook has BSODed a few times when it is in PIO Mode, without any real explanation. I have a Samsung N120. Specs are as follows: http://www.samsung.com/ca/consumer/office/mobile-computing/netbook/NP-N120-KA01CA/index.idx?pagetype=prd_detail&tab=spec&fullspec=F. Only difference is that I have upgraded to 2.0 GB of DDR2 RAM. EDIT: For all who are looking for an answer to this problem, click the link in Kythos's answer and look at number 6 (Re-enable DMA using the Registry Editor). This always works for me now. If on reboot, you seem to only have a black screen after XP is loading, just wait... it is still loading and will show signs of life after 2-3 minutes.

    Read the article

  • NetBSD Networking

    - by Mike
    Hello, everyone! I have an old Toshiba Satellite 4015CDT, with Pentium II MMX, 32MB RAM, 4GB HDD. It also has one USB 1.0 port, parallel and serial ports, a 3.5" floppy drive and a CD-ROM drive (probably almost dead). I've installed NetBSD on this machine (full install) and now I want to connect it to the Internet. Although it has one PCMCIA modem card in it, it is obviously not an option. I've narrowed down my available options to the following: Connect a USB wireless adapter. I have a Realtek RTL8192 adapter, but although the system gives me the device's name (through dmesg) it fails to recognize it as a network adapter. Connect the laptop to another machine through a serial connection, so that the other machine will serve as a bridge to the Internet. Here is the page from the NetBSD documentation on serial connections. Unfortunately, I was not able to find anything on bridging there. I would very much appreciate your suggestions on the topic. Thanks in advance.

    Read the article

  • Existing open source software for wireless mesh networking?

    - by user70352
    Hello! My goal: Build a wireless mesh network with some ALIX 2D2 (500 MHz AMD Geode LX800 x86 CPU, 256MB RAM, Atheros wireless card) Aside from working like a normal wireless mesh network users should be able to read/write data from/to the ALIX Boxes and the ALIX boxes should be able to process data. Questions: Should I try to flash dd-wrt x86, voyage linux (linux.voyage.hk) or something else? What (open source) software should I look into before I start? Should I use a 'server' for data storage and processing instead of the ALIX boxes? Is it even possible to use the ALIX boxes for routing AND data storage and processing? Final notes: Data can be anything, for example, I want to setup a wireless mesh using the OLSRD protocol so my whole town gets wifi and can access songs on the network. It's not for that, but that's the idea. I'm not afraid of programing, compiling or working with *nix. This is mostly 'for fun' rather than for practicality. Thanks in advance for any feedback.

    Read the article

  • VMWare ESXi 4.1- 5.1 installation hang

    - by osij2is
    I'm well aware that I'm trying to install VMWare ESXi 5.1 on hardware that's not on the HCL. I can't find my motherboard on the ultimatewhitebox site as well. I acknowledge these issues in advance. What I'm trying to find is someway to access the logs during installation or see a console or log file to see where the installation is hanging at and remove a device or change a setting in the BIOS. The installation is hanging, not getting a purple screen of death. I thought by hitting ALT+F10 or F12 (or some key combination as such) would enable me to see the console but no such luck. I haven't been able to find much within the ESXi online documentation either. Here's the parts I'm using: AMD Phenom II x3 700 MSI 890FXA-GD70 (IOMMU capable) 16GB DDR3 1333 RAM (2x8GB DIMMs) Intel Pro 1000 (Dual-GbE) PCIe x4 (removed during installation) LSI 9211-8i PCIe (removed during installation) LSI 9201-16i PCIe (removed during installation) Matrox video card BIOS settings: IOMMU is enabled (during 5.1 IOMMU successfully loads) AHCI is enabled (hangs for 4.1) Both onboard Realtek NICs are disabled For ESXi 5.1, the installation hangs after vmkapi_v2_0_0_0 is loaded. For ESXi 5.0, it hangs when loading the vmklinux_9 module. For ESXi 4.1 U3, the installation hangs during loading of ahci module. Again, I'm looking for some way to view a console (service console?) or log file during or after an installation attempt to see what verbose error messages or logging can lead me to solving this problem.

    Read the article

  • Ubuntu12.04 crashed while trying to install Ubuntu14.04, no longer have access

    - by FACE
    Posting from my laptop, as my Compaq desktop crashed. Not very computer saavy, and not sure what info I should provide...but here's a start: 9 year old desktop Compaq SR 1650NX, AMD Athlon 3500+ probably 1 gB ram (duh....) Was running 12.04....was attempting to upgrade to 14.04, not sure if I interrupted it. Pretty much stuck on (constantly redirected to) a page which says "GNU Grub version 1.99-2"; it offers several choices (as written): Ubuntu, with Linux 3.2.0-67-generic Ubuntu, with Linux 3.2.0-67-generic (recovery mode) Previous Linux versions Memory Test (memtest86+) Memory Test (memtest86+, serial console 115200) But none of the selections seem to be able to get me anywhere (i.e., I click yes, but can't seem to run any commands - not that I know anything useful); I escape from those pages by repeatedly hitting CTRL-ALT-DEL Any help would be appreciated; will provide additional info when requested. Thanx (hopefully), in advance. (If I don't respond immediately, it just means I had to attend to other concerns...will leave page open and check back in as often as possible). FACE

    Read the article

  • Inkscape: what are "line" objects?

    - by Peter Mortensen
    What is a "line" object in Inkscape? Drawing lines in Inkscape is by using the tool "Draw Bezier curves and straight lines (Shift+F6)". This creates objects of another type, "path". Using Inkscape: is there a way to convert an object of type "line" into an object of the more general type "path"? I have imported a drawing (mostly lines, rectangles and text) that has been through Adobe Illustrator: originally made in Inkscape, imported into Illustrator, edited, saved from Illustrator as SVG, imported into Inkscape. Sample from the imported SVG file: <path id="path5855" stroke="#000000" d=" M320.198,275.935" /> <line fill="none" stroke="#000000" x1="348.553" y1="45.097" x2="348.553" y2="185.346" id="line3368" /> Update 1: I have inspected the original XML (SVG) file from 2006 and it does not contain any "line" XML tags. Thus it must be a crime of Adobe Illustrator. When a line is selected in this imported SVG file the bottom panel displays: "Line in root. Click selection to toggle scale/rotation handles.". When a line is selected that was drawn in Inkscape the bottom panel displays: "Path (2 nodes) in Layer 1. Click selection to toggle scale/rotation handles." What is the difference between "line" and "path"? Is "line" some kind of read-only/non-editable object? A generic term like "line" is not easy to use in search, but I have now found the definitions for "line" and "path": SVG line: http://www.w3schools.com/svg/svg_line.asp SVG path: http://www.w3schools.com/svg/svg_path.asp Platform: Inkscape v0.46 (2008-03-10), Windows XP 64 bit, 8 GB RAM.

    Read the article

  • FTP timing out after login

    - by Imran
    For some reasons I cant access any of my accounts on my dedicated server via FTP. It simply times out when it tried to display the directories. Heres a log from FileZila... Status: Resolving address of testdomain.com Status: Connecting to 64.237.58.43:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [TLS] ---------- Response: 220-You are user number 3 of 50 allowed. Response: 220-Local time is now 19:39. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 15 minutes of inactivity. Command: USER testaccount Response: 331 User testaccount OK. Password required Command: PASS ******** Response: 230-User testaccount has group access to: testaccount Response: 230 OK. Current restricted directory is / Command: SYST Response: 215 UNIX Type: L8 Command: FEAT Response: 211-Extensions supported: Response: EPRT Response: IDLE Response: MDTM Response: SIZE Response: REST STREAM Response: MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*; Response: MLSD Response: ESTP Response: PASV Response: EPSV Response: SPSV Response: ESTA Response: AUTH TLS Response: PBSZ Response: PROT Response: 211 End. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is your current location Command: TYPE I Response: 200 TYPE is now 8-bit binary Command: PASV Response: 227 Entering Passive Mode (64,237,58,43,145,153) Command: MLSD Response: 150 Accepted data connection Response: 226-ASCII Response: 226-Options: -a -l Response: 226 18 matches total Error: Connection timed out Error: Failed to retrieve directory listing I have restarted the FTP service serveral times but still It doesnt loads. I only have this problem when my server is reaching it peak usage which is still only 1.0 (4 cores), 40% of 4GB ram. The ftp connections isnt maxed out because only me and my colleague have access to FTP on the server.

    Read the article

  • swapping or trashing with vast amounts of unmapped pagecache

    - by Marco
    I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only Firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happens: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this?

    Read the article

  • swapping or trashing with vast amounts of unmapped pagecache

    - by Marco
    I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happes: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this? TIA, Marco

    Read the article

  • DVD-ROM: Pioneer DVD-115GA not being detected.

    - by Wesley
    Specs to put things in context: AMD Athlon XP 2400+ @ 2.00 GHz / 2 x 512 MB PC-3200 DDR RAM / 160 GB IDE HDD / 128 MB GeForce 6200 AGP / FIC AM37 / Windows XP Pro SP3 So this computer is actually an upgraded EMachines T2482. I found a used DVD-ROM for cheap... the Pioneer DVD-115GA. I originally had a plain DVD Reader (Lite-On XJ-HD166S) which was quite useless. So I basically did a simple swap of the drive and powered up the computer. The drive could open and close, and I put in a DVD and it was spinning, but no detection. Going into the BIOS, the drive was not detected. (The IDE cable connecting the DVD-ROM is connected to the CD-ROM below it and then attached to the secondary IDE port on the motherboard.) So I started all the way up and tried to scan for hardware changes in Computer Management. Still, nothing. I have the software downloaded from the Pioneer site, and that couldn't detect anything. So what else can I try to hopefully get my DVD-ROM recognized by the BIOS? Thanks in advance!

    Read the article

  • PHP-FPM and APC for shared hosting?

    - by Tiffany Walker
    We are looking into finding a way to get APC to only create one cache per account / site. This can be done with Fastcgi (last update 2006…) but with Fastcgid APC will have to create multiple caches for multiple processes run by the same account. To get around this problem, we have been looking into PHP-FPM PHP process manager allows multiple PHP processes to share a single APC cache. But from what I have read (I hope I'm wrong) , even if you create a pool per process, all sites accross all pools will share the same APC cache. This brings us back to the same problem as with shared Memcached: it's not secure ! On php-fpm's site I read that you can chroot php-fpm pools and define a specific UID and GID per pool… if this is the case then shouldn't APC have to use this user and not have access to other pools cache ? An article here (in 2011) suggests that you would need to run one process per pool creating multiple launchers on different ports and different config files with one pool per config file : http://groups.drupal.org/node/198168 Is this still neceessary ? If so what would be the impact of running say 800 processes of php-fpm ? Would it be mainly memory ? If so how can I work out what the memory impact would be ? I guess that it would be better to run 800 times php-fpm then to have accounts creating multiple APC caches for a single site ? If on average an account creates a 50MB cache and creates 3 caches per account that makes 150Mb per account which makes 120GB… However if each account uses on average only 50Mb that would make 40GB We will have at least 128GB of ram on our next server so 40GB is acceptable if running 800 x PHP-FPM does not create an overhead of more than 20GB ! What do you think is PHP-FPM the best way to go to provide secure APC cache on shared hosting with a server that has a decent amount of memory ? Or should I be looking at another system ? Thanks !

    Read the article

  • How to make 7zip faster

    - by user34463
    I normally use winRAR over 7Zip simply because its faster and only a little less efficient with compression. I did a few tests on different filetypes and sizes comparing the 7zip and winRAR default settings on their normal compression and their best compression, and in a lot of cases winRAR was 50% faster and in some it was actually 100% faster. But, I do like FOSS more. So here are my questions: Is there a way to make 7zip speed up? I'd like it to at least be on par with rar's speed Is there a way to make recovery segments in 7zip like you can in rar? I didn't see any, but I guess it could be a command line thing. I tested winrar and 7zip using the latest stable version of each (4.something with 7zip). Is the 9.x beta release noticeably faster at compression? I'm talking about faster at a comparable setting in WinRAR, not just lowering to bare minimum compression. If it matters, I use a quad core intel i7 720 (1.6ghz)/(2.8ghz) with 4gb DDR3 ram, and the 64-bit version of 7zip.

    Read the article

  • Problem booting virtual machine after converting VMDK to VHD

    - by vg1890
    I used the VMWare VCenter Converter Standalone Client to convert a physical drive on my old PC to a virtual drive. The conversion worked fine and I ended up with a valid VMDK file. Next, I wanted to convert the VMDK to a VHD for use with Microsoft Virtual PC, since that's what I use on my new box. I used WinImage for the conversion and that worked fine, too. I can access the files from the virtual drive through WinImage. However, when I create a new virtual machine using Virtual PC and add the existing VHD file, the machine doesn't boot. The initial boot screen flashes with the amount of RAM and then the screen goes black. If I turn off the VM and reboot in safe mode I can see the drivers being loaded until eventually it gets to crcdisk.sys and hangs indefinitely. Any ideas how to fix this? I'm not opposed to starting over from scratch if there's another method to turn my physical machine into a Virtual PC VM. Thanks! EDIT - I should add that the virtual drive is a system boot drive and not a secondary drive. EDIT - I tried booting from the install CD and doing a repair. The result was that the system could not be repaired due to a "driver error."

    Read the article

  • Windows Clients: Windows or Linux Domain Controller?

    - by Ramon Marco Navarro
    I'm planning to set up a domain controller for our small computer laboratory. I'm a little confused as to what operating system to use for our domain controller. What's in the lab: The lab has 25 units running a mix of Windows 7 and Windows XP. The domain controller will only have 2GB of RAM running a C2D E7200. (Is this enough?) What we want: The Domain Controller will also be running a git server. The Domain Controller will also be used as a general development machine (mostly Java, PHP). A way to centralize the updates for the windows clients, so that they won't have to download the same patches from the remote site. The machines would just query them from the local domain controller and get the updates from there. Our head recommended that I virtualize a Windows Server 2008 system under a Linux host and use the former as a domain controller and the latter for development or the other way around. A comparison of the advantages and disadvantages of using a Linux distribution or Windows Server 2008 in this situation would also be appreciated. As you may have noticed by now, I'm kinda new to setting up a domain so I hope you guys will be able to help me. Thank you.

    Read the article

  • How to troubleshoot web server lock-up (Debian Squeeze)

    - by Ryan
    Every once in a while, my web server slows so significantly, it seems locked up. Can't SSH in, no sites being served. It's a VPS that started out as Debian 5 which I upgraded to testing (squeeze). It's a typical LAMP set-up with the sole purpose of running a couple of wordpress sites. One time when it locked up, I got to one of the sites, but it was wordpress complaining it couldn't establish a database connection. So it seemed as if something was really chewing up the CPU and mysqld either timed out, or possibly failed and couldn't restart. But since I couldn't SSH in I feel more inclined to attribute it to CPU. But the only processes running now, aside from OS and kernel stuff: apache mysqld python (for fail2ban) sshd exim4 It has 512M of RAM and 1.5 GB of swap. Every time I check on it, it has plenty of free memory and is using virtually no swap (usually 2-3M). And since I am running fail2ban I don't think I'm getting ddosed. I did find this in my logwatch email this morning (it locked up late last night, when there would have been very little traffic): 6 Time(s): [<ffffffff810a0ebc>] ? oom_kill_process+0x7e/0x23d 6 Time(s): [<ffffffff810a1505>] ? __out_of_memory+0x12a/0x141 6 Time(s): [<ffffffff810a1586>] ? out_of_memory+0x6a/0x94 I didn't find anything else suspicious. It can't be my provider's host because I can SSH in and restart the VM, and everything seems fine. Anybody know which logs I should start poring through to find the core of my problem? Thanks guys.

    Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >