Search Results

Search found 5619 results on 225 pages for 'starts'.

Page 149/225 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

  • Wireless router blocking some sites while using ethernet is fine

    - by Micke
    I'm using Windows 7 and my router is a wireless Apple Airport Express that is approximately two years old. Suddenly I can't access some sites (for example www.sthlm.friskissvettis.se, or www.vegetarian-shoes.co.uk, some streamed tv-shows on svtplay.se, and a number of other random sites) when connecting to internet with my router. It worked good until recently and I'm fairly sure this problem emerged when my ISP upgraded from 10/10mbit to 100/10mbit speed. Most other sites like facebook and google works fine. When using my network cable to connect to internet everything works fine and I can access these sites. Firmware is current and I've tried reseting the router to factory defaults. Tried different browsers, and I can't ping the "blocked" sites either. Tracert www.sthlm.friskissvettis.se starts with 10.0.0.1 and continues through a number of long addresses until it says timeout. The last working address before timeout was sth-tcy-ipcore01-ge-0-2-0.neq.dgcsystems.net [83.241.252.13], if it matters. Tracert www.vegetarian-shoes.co.uk also eventually gives me a timeout. When the network cable is plugged in, I still get timeout on tracert www.sthlm.friskissvettis.se even though I can access the site in Chrome. Weird. www.vegetarian-shoes.co.uk doesn't give me a tracert timeout when the cable is plugged in, and I can access the site as usual. I've tried changing DNS servers to use opendns servers instead, but to no use. I've tried pinging these two sites with a lower MTU packet size (with this method: http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/), but still can't access them through ping... I don't know what to do anymore.... any suggestions???

    Read the article

  • Mysql queries stuck in "sending data" state

    - by MarkPW
    I'm running a Litespeed web server and a database server (2 x Clovertown 5335) with MySQL 5.1.52-log (running on Cent OS 4.5 and 4.6 32bit respectively). Last week, I upgraded from 5.0.51a-community-log and since then I've been having a problem whereby my database server's load starts increasing for no apparent reason. Running SHOW PROCESSLIST; I see all of my SQL_CACHE queries that use a wildcard in WHERE, backing up and getting stuck in "sending data" state. However, other queries that use SQL_CACHE but no wildcard do not get caught up in this. To get things going again, the first time it happens (after about 24 hours), I have to restart mysql. 4/5 times it will re-occur after about 20 minutes or so and this time and for subsequent occurrences it is not necessary to restart mysql. Simply stopping the web server for a few minutes will suffice while I allow the stuck queries to clear themselves up. I had no such problem with the the previous mysql install. What could be causing the issue and how do I resolve it? Thanks

    Read the article

  • Windows Media Sharing not 'always' being detected by PS3

    - by Ahmad
    I'm having a weird problem with Windows Media Sharing on Windows 7 .. I have the following hardware in my network: PC 1 --- My main PC --- runs Windows 7 Ultimate x64 PC 2 --- My backup PC --- runs Windows 7 Ultimate x32 PS3 PC 1 is my main PC which has all my data/media on it .. PC 2 is a backup PC I have, but I use it like once in 2 months .. It has nothing installed on it apart from some very very basic software ... Problem is, my PS3 always sees the media sharing service coming from PC 2, but it never sees the media sharing service coming from PC 1 initially .. Both PC 1 and PC 2 have the same media sharing configuration (All everything on all devices on all networks) ... But when I restart both PCs, the PS3 will only detect PC 2's media sharing service, not PC1 .... However here's the twist .. When PC 1 is restarted, and if I view my 'Network' on PC 2, I do see PC 1's Media Sharing Service, and I'm able to play from it too on PC 2 .. To get my PS3 to also see PC 1's media sharing service, I have to do either of the following 2 things: 1) Play something from PC 1's media sharing service on PC 2 ... The PS3 will then magically also detect PC 1's media sharing service .. 2) Go into the Services area on PC 1 and restart the 'Windows Media Player Network Sharing Service' ... After this, the PS3 also instantly starts to see PC 1's media sharing service .. Since my PS3 is like a month old and is properly detecting PC 1's media sharing service, I think the problem is somewhere in the configuration of PC 1's media sharing service ... Also, on PC 1 I have Norton Internet Security 2012 installed, but I've disabled it completely, and have also disabled Windows Firewall (from PC 1 only) .. Can someone shed some light onto this ?

    Read the article

  • Linux Mint reset display resolution from console

    - by wullxz
    I have a Linux Mint 13 Xfce in a VMware Workstation 8 VM and set the resolution from 800x600 to 1280x768 and now I get permanently logged out when I try to login. I knew how to get back to my old resolution back in the xorg.conf days but Linux Mint now uses xrandr which won't display any displays when running # xrandr because X is not running (of course not - I can't login over GUI). I know that there are configuration files in /etc/X11/Xsession.d/ because I configured a debian based thinclient's resolution in a file called /etc/X11/Xsession.d/91configure_display but that file doesn't exist in my Linux Mint VM. So, how do I reset my X screen resolution from console? Edit: I forgot to tell you that I can't change resolution in console: # xrandr -s 800x600 Can't open display This message appears every time I use xrandr or xrandr -s *resolution* Update: I tried what bWowk suggested: # export DISPLAY=:0.0 # xrandr -s 800x600 No protocol specified No protocol specified Can't open display :0.0 So, that doesn't work either. Isn't there a configuration file that is executed every time X starts? X is running btw - ps aux | grep X shows one process /usr/bin/X running.

    Read the article

  • Login failed for user 'XXX' on the mirrored sql server

    - by hp17
    We have 4 web servers that host our asp.net (3.5) application. Randomly, we get error messages like : 1) "Login failed for user 'userid'" 2) "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)" we are running sql2005 and have a principle and a mirror db (sync). When these exceptions are thrown, I look at the SQL error logs on the mirrored db and noticed the failed login messages in there. The principle db is running fine and the other web apps are working great. this will happen for maybe 10 min, then the app pool recycles and it starts hitting the principle db again. Is there a configuration I have incorrect? my theory is that our principle db is forwarding the request to the mirror, but that should never happen. any help??

    Read the article

  • SYS-5016T-MTFB will not POST without manual assistance (Motherboard: X8STi-F)

    - by Dan
    I have a Supermicro 5016T-MTFB 1U server which I am in the process of setting up, but it has a really strange problem. When the system is powered on it will not POST until I press the reset button a few times, followed by pressing the delete key on the keyboard to "wake it up". If I power it on and do nothing, the fans spin up but nothing else happens at all. After pressing the reset button once, the red "overheat" light comes on and blinks which is supposed to indicate a fan failure - but all the fans are working. Pressing reset again usually stops the blinking, and the system starts the normal POST routine but it will not actually get to the bios screen unless I press delete. If I don't press delete, it just continues to hang. After pressing delete it will take me into the bios setup screen, if I exit without saving changes I can boot the system normally. I was able to successfully install Linux with no trouble...but upon rebooting the same problem happened again. This board has integrated IPMI which I thought was the problem, so I disabled it via the jumper on the board. Did not help. Each time this system powers on, it goes on for a second, then turns off again for another second, then turns back on again. I don't know why it does that. Here is what I put in the system: 1 x Xeon E5630 (Nehalem) 80W TDP (it's not overheating, CPU temps stay under 40 degrees C) 2 x Kingston 2GB x 3 DDR3-1066 Memory ECC, unbuffered, unregistered (kvr1066d3e7sk3/6g) 1 x Intel X25-M 160 GB 2 x Western Digital RE3 1TB

    Read the article

  • nginx not serving admin static files?

    - by toto_tico
    First, I want to clarify that this error is just for the admin static files. This means my problem is specific just to the static files that corresponds to the Django admin. The rest of the static files are working perfect. Basically my problem is that for some reason I cannot access those admin static files with the ngix server. It works perfect with the micro server of Django and the collect static is doing its job. This means it is putting the files on the expected place in the static folder. The urls are correct but I cannot even access the admin static files directly, but the others I can. So, for example, I am able to access this url (copying it in the browser): myserver.com:8080/static/css/base/base.css but i am not able to access this other url (copying it in the browser): myserver.com:8080/static/admin/css/admin.css I also tried to copy the admin/ directory structure into other_admin_directory_name/. Then I can access myserver.com:8080/static/other_admin_directory_name/css/admin.css Then, it works. So, I checked permissions and everything is fine. I tried to change ADMIN_MEDIA_PREFIX = '/static/admin/' to ADMIN_MEDIA_PREFIX = '/static/other_admin_directory_name/', it doesn't work. This a mistery in itself that I am exploring but still no luck. Finally, and it seems to be an important clue: I tried to copy the admin/ directory structure into admin_and_then_any_suffix/. Then I cannot access myserver.com:8080/static/admin_and_then_any_suffix//css/admin.css So, if the name of the directory starts with admin (for example administration or admin2) it doesn't work. * added thanks to sarnold observation ** the problem seems to be in the nginx configuration file /etc/nginx/sites-available/mysite location /static/admin { alias /home/vl3/.virtualenvs/vl3/lib/python2.7/site-packages/django/contrib/admin/media/; }

    Read the article

  • OS X Client & Ubuntu Server - Best way for client to access files on server?

    - by Camsoft
    I've got a local development web server running Ubuntu. I also have an iMac running OS X 10.6 which I use a client and is my development machine. I'm currently have Samba server installed on my Ubuntu server. I have shares setup for all the website directories. I then use my Mac and Coda to edit the files via their shares. This generally works really well but I noticed that my Mac was writing loads of resource fork ._filename files everywhere. I found out the following about the files: These files are created on volumes that don't natively support full HFS file characteristics (e.g. ufs volumes, Windows fileshares, etc). When a Mac file is copied to such a volume, its data fork is stored under the file's regular name, and the additional HFS information (resource fork, type & creator codes, etc) is stored in a second file (in AppleDouble format), with a name that starts with "._". (These files are, of course, invisible as far as OS-X is concerned, but not to other OS's; this can sometimes be annoying...) Does anyone know of a way of sharing files between a Mac client and a Linux server that is most compantable between the two operation systems? Ideally it needs to support the HFS filesystem so that the resource forks are not created and it also needs to support the permissions between server and client.

    Read the article

  • USB Mouse and Keyboard not working in Linux 4 Tegra

    - by Sijo
    I am a new person in Tegra Linux development. I have Tamontem NG Evaluation board with Tegra 3 Chip. I installed L4T sample file system from NVIDIA tegra Resources (https://developer.nvidia.com/linux-tegra) and installed the file system as described in the documentation provided in NVIDIA site. Already these was an SD card with L4T running. i dont want to change the boot loader. So I copied the boot.scr.uimg to root (/) folder and uImage to boot(/boot/) and it starts booting from the existing SD card. After that while booting, some errors occurred in some Bluetooth devices (there is no bluetooth device in the board). So I disabled Bluetooth by giving the following command sudo mv /etc/init/bluetooth.conf /etc/init/bluetooth.conf.noexec Now the problem is that mouse and keyboard are not working. So i cannot login. Even though i installed desktop, the mouse and keyboard are not working. But mouse and keyboard are enumerating. lsusb command is showing the USB mouse and keyboard. The installed file system is Ubuntu 13.04. Linux Kernel version is 3.1 What to do. Please help.Thanks in Advance.

    Read the article

  • VMware Virtual Infrastructure Web Access not starting on Fedora 14

    - by FusionHammer
    I am running a Fedora 14 server with VMware Server 2. When I initially installed VMware Server, everything was working fine. This included accessing Web Access on port 8333 (https) and 8222 (http). I had to perform a server restart and afterwards, the Web Access is not starting when I run: /etc/init.d/vmware-mgmt start The VMware Server Host Agent starts [OK], but the Web Access has no [OK] or [Failed] next to it. I also checked ports 8333 and 8222 by running a netstat, but neither are showing up. In addition, I checked the proxy.log and client.log files in the following directory: /usr/lib/vmware/webAccess/tomcat/apache-tomcat-6.0.16/logs/ The proxy.log doesn't have entries in it past 9-18-2012, which is the date the server restart occurred. The client.log is empty. I not sure what is causing this issue or what log files will be helpful in narrowing down the cause. I could re-install VMware Server, but I would like to narrow down the cause as it could occur again with the new re-installed environment.

    Read the article

  • Yum installing wrong MySQL version on CentOS 5 (Amazon)

    - by Marius Stuparu
    I'm having trouble with a CentOS server running on AWS. This is CentOS 5.6 i386 from RightImage, but the problem was the same on all RightScale AMIs. When issuing the following command: yum install mysql mysql-server mysql-devel the only packages proposed by yum are MySQL-devel-community and MySQL-server-community. Which would't be a problem, except this package is old/incomplete, because it does not create a "mysqld" service, only a /etc/init.d/mysql (notice the missing d). That would't be a problem, I can start the service by doing ./etc/init.d/mysql start, and it starts OK, but there is no "mysql" (or other mysql*) command available. If I try to force a different version (yum install mysql50-server...) I get this yum error: mysql-5.0.77-4.el5_6.6.i386 from updates has depsolving problems --> mysql conflicts with MySQL-server-community (even when I don't have MySQL-server-community installed). I have tried this before and after yum update, in a fresh image. How can I install a working version of MySQL? I'm stuck on CentOS 5 because I want to install Kloxo (which does not yet support CentOS 6). I'm not interested in Webmin, and I can't afford cPanel. Thanks!

    Read the article

  • Cisco QoS Guidence

    - by Kyle Brandt
    I have a 10M connection to the internet that is hooked into a 100M port. I am getting started with QoS, and am hopping for a little guidance on setting it up on a Cisco 3825 router. Right now I am going forward with the idea that I have to implement it on my router, and the provider can't provide QoS for me. How I envision it working is that the QoS will drop or queue packets on my router and that will help prevent a situation where the provider has to start dropping a lot of packets. Right now all I am tasked with is making sure that one of the 3 LANs gets a certain slice (say 3M for Gig Lan1) of the 10M internet connection (But ideally this will be more flexible in the Future). 10M Internet on 100M port on HWIC-4ESW +-----------------------+ | | Gig Lan1 | Cisco 3825 | Lan3 on HWIC-4ESW | | +-----------------------+ Gig Lan2 I need to learn more about QoS, but having a target technology and maybe example configuration will help me wrap my head around the reading I am doing a little more. Which Cisco QoS Technology do you recommend for this particular situation? Have a basic sample config of how this might work? Right now the 10M line is not congested, so this more to have something in place in case it starts to become mildly congested in the future.

    Read the article

  • How to activate Win XP from Windows 7 compatibility mode on MacOS Parallels 5

    - by Ben Hammond
    I am running Parallels Desktop 5.0.9344 for Mac. I am running Mac OS 10.6.3 10D2094 I have bought a retail copy of Window 7 professional specifically because I need the XP compatibility. Windows 7 is installed and working. I have problems with the XP activation Windows7 'Virtual PC' does not run under Parallels (strange error about Server Execution failed 0x80080005). I have used the Parallels Transporter to convert the "Windows XP Mode Base.vhd" file into a parallels Virtual Machine. This copy of XP now starts normally, however it records itself as unregistered. There was a KEY.txt file in the same directory as the .vhd file; although this file contains a valid-looking activation key, it does not appear to activate the instance of XP. I have also tried to enter the Win7 activation key; this does not work either. I have tried calling the two phone numbers; an automated system asked me to enter 56 digits through the telephone and then accused me of being a pirate. I believe it may be possible to install Win7 via Bootcamp, start WinXP under Virtual PC, activate it and then import this activated .vhd into Parallels; but that seems a long way round, and is far from certain. What can I do to get WinXP running under Mac Parallels Desktop ?

    Read the article

  • What breaks in a Windows domain if a member has a high time skew?

    - by Ryan Ries
    It's taken for granted by most IT people that in a Windows domain, if a member server's clock is off by more than 5 minutes (or however many minutes you've configured it for) from that of its domain controller - logons and authentications will fail. But that is not necessarily true. At least not for all authentication processes on all versions of Windows. For instance, I can set my time on my Windows 7 client to be skewed all to heck - logoff/logon still works fine. What happens is that my client sends an AS_REQ (with his time stamp) to the domain controller, and the DC responds with KRB_AP_ERR_SKEW. But the magic is that when the DC responds with the aforementioned Kerberos error, the DC also includes his time stamp, which the client in turn uses to adjust his own time and resubmits the AS_REQ, which is then approved. This behavior is not considered a security threat because encryption and secrets are still being used in the communication. This is also not just a Microsoft thing. RFC 4430 describes this behavior. So my question is does anyone know when this changed? And why is it that other things fail? For instance, Office Communicator kicks me off if my clock starts drifting too far out. I really wish to have more detail on this. edit: Here's the bit from RFC 4430 that I'm talking about: If the server clock and the client clock are off by more than the policy-determined clock skew limit (usually 5 minutes), the server MUST return a KRB_AP_ERR_SKEW. The optional client's time in the KRB-ERROR SHOULD be filled out. If the server protects the error by adding the Cksum field and returning the correct client's time, the client SHOULD compute the difference (in seconds) between the two clocks based upon the client and server time contained in the KRB-ERROR message. The client SHOULD store this clock difference and use it to adjust its clock in subsequent messages. If the error is not protected, the client MUST NOT use the difference to adjust subsequent messages, because doing so would allow an attacker to construct authenticators that can be used to mount replay attacks.

    Read the article

  • TeamCity sends inadequate responses after Selenium tests

    - by Dmitriy Sukharev
    I have a TeamCity 7.0.2 at CentOS 6.2 server without X Server. I've installed x11-fonts*, xvfb, firefox, xauth, extracted env. variable DISPLAY=localhost:1, and started xvfb. After that I could start Selenium tests using maven. Tests are executed, but there's an issue with TeamCity. Usually TeamCity starts hehaves absolutely inadequate (it confuses images at the page, sends xml or strange text ampersants and numbers in responses and is a bit slower), also tests are executed 4 times slower (1h 15m) at server than at tester Windows 7-based machine (25m). It worth to notice that tests launch two Jetty servers for tested application (one for REST-services application and another for client). In TeamCity I set JVM command line parameters: -Xms256m -Xmx1224m -XX:MaxPermSize=320m, and Additional Maven command line parameters ends with "-DMAVEN_OPTS=-Xmx1024m" (without quotes). Also both web-services and TeamCity uses the same Oracle server (but different Oracle users). Finally TeamCity and its build agent is at the same server. Server has only 4GB of RAM, but during testing there're 400MB of RAM and 1.2GB of swap. TeamCity and Firefox uses about 65% of CPU during testing. There's no firefox process after end of testing. My knowledge about Selenium is weak. I only know that we use 2.20.0 version of selenium-java maven dependency. Please help me to determine why TeamCity sends wrong responces after Selenium tests. I've tried to give you all information I have, but feel free to ask me for more information.

    Read the article

  • Mysql Fail to start

    - by John Naegle
    I'm running a Ubuntu 12.04 LTS Virtual Machine. Last week, the VM stopped unexpectedly now mysql will not start on the VM. These two events may be related, they may not be. When I try to connect: $ mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2) Then: $ sudo service mysql start start: Job failed to start And $ dmesg [ 1838.218400] type=1400 audit(1374633238.253:50): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=18473 comm="apparmor_parser" [ 1838.358656] init: mysql main process (18477) terminated with status 1 [ 1838.358695] init: mysql main process ended, respawning [ 1839.269303] init: mysql post-start process (18478) terminated with status 1 And $ service mysql status mysql stop/waiting I think this means mysql is crashing when it starts: $ sudo mysqld start 130723 21:51:24 InnoDB: Assertion failure in thread 3064211200 in file fut0lst.ic line 83 InnoDB: Failing assertion: addr.page == FIL_NULL || addr.boffset >= FIL_PAGE_DATA InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: about forcing recovery. 02:51:24 UTC - mysqld got signal 6 ; Per the manual, I went to the data directory (/var/lib/mysql) and ran this: myisamchk --silent --force */*.MYI Then: $ sudo mysqld ... InnoDB: Your database may be corrupt or you may have copied the InnoDB InnoDB: tablespace but not the InnoDB log files. See InnoDB: http://dev.mysql.com/doc/refman/5.5/en/forcing-innodb-recovery.html InnoDB: for more information. ... Is my database corrupt? What can I do to recover? Re-install mysql? Something less drastic? I'm fine with losing the database, I just want a working system.

    Read the article

  • VMware vSphere 4.1 and BackupExec 2010

    - by Josh
    I'm sure a common problem with most shops is backups, their size, and the window in which you have to back up the data. What we are working with: VMware vSphere 4.1 Cluster PS4000XV Equallogic Storage Array (1.6TB Volume dedicated for Backup to Disk) Physical Backup Server with a single LTO4 drive. BackupExec 2010 R3 with the following agents, Exchange, SQL, Active Directory, VMware. Dual Gigabit MPIO Connections between all devices (Storage Array, Backup Server, VM Hosts) What we would like to accomplish: I would like to implement an efficient Backup to Disk to Tape solution where all of our VMs are backed up to the Storage Array first, and then once completely backed up to the array are replicated to tape. In the event we needed to recover, we would be able to do so directly from tape. Where we are at currently. Of the several ways I have setup the jobs in Backup Exec 2010 R3 the backup jobs all queue up at the same time, as soon as a job is finished backing up to disk it then starts that same job to tape, but pulling from the original source instead of the designated B2D location. I understand that I could create a job that backs up the "Backup to Disk" folder to tape, but in the event of restoration, I would first need to stage the data in the B2D folder before I could restore the VM. I would really like to hear from individuals in similar situations. Any and all comments and critiques are appreciated.

    Read the article

  • Virtual host config issues in osx 10.7 server app

    - by Benno
    I have two mac mini lion servers setup to run as production and staging machines. My sysadmin decided on these machines over the previous CentOS we had because it had an "interface" to be able to manage it, rather than just the terminal. To be honest, I prefer the terminal. My problem is, the mac osx 10.7 server.app seems to be having issues with the creation of virtual hosts in the 'Web' section. It seems VERY touchy. For example, I cannot create a http virtual host first. I have to create a https host first with a unique dns name 9e..g vuly6), then create the http host with a different dns name to the first (e.g. www), or it appears to override it the first one, even though one is ssl and one is non-ssl. Further, it seems to override perfectly good configurations at random. For example, the default sites directory is usually /Users/default/Sites/Customsites or something, but sometimes when I load the server.app it changes to /var/empty. Also, if I change or add extra virtual hosts after the first one or two, it starts to mess up and the first two virtual hosts start having issues. Has anyone had any experience with setting up virtual hosts via this app? Am I able to manually create these virtual hosts, without using the app, and without the app overriding my settings when I restart apache?

    Read the article

  • USB mouse disconnecting and reconnecting in windows and linux

    - by Kalak
    I have a problem similar to what is described at "Why is my USB mouse disconnecting and reconnecting randomly and often?" except is is happening in both Windows 7 and Linux (Ubuntu 12/04TLS, fully patched), multiple mice, multiple OSs. It stops responding to input for about 3-5 seconds, then starts responding again. It's more frequent and lasts longer when running games (TF2, L4D, Dishonored, Borderlands 2, and more), but happens when just running the OS as well. I was hoping it was the motherboard so I bought a USB 2.0 PCI card to try that, but it's still happening. I've stripped it down to just the keyboard and mouse (different keyboard too just in case the keyboard was the problem), but it's still happening. All the hardware (mice and keyboards) work fine on other computers. I have literally pulled the mouse and keyboard out and plugged them into another computer (laptop) and re-joined the online game and had no problem with the keyboard and mouse combo that just failed on my gaming rig. Please no driver / Windows or Linux only suggestions, as that wouldn't effect both OSs. edit: known good mice I've brought home are now going bad. I suspect the hardware is messed up (voltage?) and has been frying the mice.

    Read the article

  • Apache process consuming all memory on the server

    - by jemmille
    I have an apache process that suddenly appears on a particular server. When it shows up it starts consuming memory at a very rapid rate, then moves on to all the swap. In all it consumes about 11GB (including swap) of memory and the server eventually becomes unresponsive. The load on the server is under 1 at all other times. The process runs as nobody and I am having a hard time tracking down the source. If i run an strace on the process and all it did was continuously dump out mprotect over and over again If i run lsof -p <pid>, I get this, but only sometimes: httpd 19229 nobody 152u IPv4 175050 crawl-66-249-67-216.googlebot.com:62336 (CLOSE_WAIT) httpd 19229 nobody 153u IPv4 179104 crawl-66-249-71-167.googlebot.com:58012 (ESTABLISHED) As long as I catch it, I can kill the process and the server almost immediately stabilizes. I have on site on the server that is getting a few thousand hits a a day that I think might be the source, but I still can't find the exact reason. Also, this is a cPanel server and I have upcp'd the server, rebuilt apache with easy apache, and rebuilt httpd.conf. It is not spawing any related processes, meaning I can find any php, mysql, cgi, etc. processes that relate to this process. It's just a loner process that balloons fast and consumes ever last MB of memory. This is on a XenServer 5.6 based VM. No other servers in the cluster are having this issue.

    Read the article

  • ownCloud WebDAV interface seems to be broken

    - by Nobleleader13245
    I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : [hostname]/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files the web version of ownCloud the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

    Read the article

  • ownCloud WebDAV interface seems to be broken

    - by Nobleleader13245
    I've been trying to host ownCloud on my server but everytime I try to it tells me this : Your web server is not yet properly setup to allow files synchronization because the WebDAV interface seems to be broken. Please double check the installation guides. This is my setup : Windows Server 2012 R2 IIS 8.5 PHP 5.5.11 ownCloud 6.0.3 MySQL 5.6.17 I tried google the error but I can't seem to find anything usefull. Some say I should try if this works : https://cloud.mcsoftworks.net/remote.php/webdav/ and yes I can navigate to this folder and I can open files from there. The calendar works and I can also just upload files from here https://cloud.mcsoftworks.net/ the only thing that doesn't seem to work is the sync client. The sync client doesn't say anything it just doesn't connect (Screenshot : http://prntscr.com/3p2apz) This is the error log : Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:56:00+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:47+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:55:34+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:37+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Fatal webdav Sabre_DAV_Exception_Forbidden: Path does not exist, or escaping from the base path was detected 2014-06-02T19:54:36+00:00 Warning core isWebDAVWorking: NO - Reason: [CURL] Error while making request: Could not resolve host: cloud.mcsoftworks.net (error code: 6) (Sabre_DAV_Exception) 2014-06-02T19:51:24+00:00 This is my php.ini : http://pastebin.com/es3MB8Uh Does anyone have any idea on how I should get this to work? I've been trying to get this to work for about 14 days now and it starts to annoy me =P

    Read the article

  • How to solve SocketException: Permission denied: connect

    - by luxinxian
    I recently encountered a problem that is giving me a headache and I need help ... The System consists of two subsystems, called A and B, each running on a standalone Tomcat instance and currently running on the same machine. A invokes B's service via Spring httpInvoker (i.e. over HTTP). B system also invokes the other system's services via HTTP. Symptoms: the system starts to run and appears to work normally for around 10-15 days; the system will run for a period of time after an exception: org.springframework.remoting.RemoteAccessException: Could not access HTTP invoker remote service at [http://xxx.xxx.xxx.xxx/remoting/call]; The nested exception is java. net.SocketException: **Permission denied: connect** when the exception occurs, the system continues. This happens always, not only occasionally. (It looks like some resources are exhausted, but CPU rate < 5%, memory < 15%, network < 5%). when the system call between A and B fails, the B system call over HTTP to an external service also failed, with the same exception. Restarting both Tomcat services makes the whole system work properly. So repeatedly following steps 1 - 5, I have not found the root reason. Environment: windows 2008 R2 tomcat7.0.42 x86_64 oralce-jdk-1.7.0_40 Any ideas?

    Read the article

  • How can I debug user mode driver failures in Windows 8

    - by Tom
    I have a 32 GB SD Card. Whenever I insert this card in to my newly upgraded Windows 8 laptop the OS stops responding normally. Metro Apps won't work. The system may or may not log in. Desktop apps may or may not be able to do things. When I remove the card and restart then all is fine. As soon as I put the card back in, the system starts misbehaving again. I've run Windows Update, so I have the latest drivers from Microsoft. This does not occur with the 8 GB cards I have. Unfortunately I only have one 32 GB card, so I can't test with others. From examining the system event log I've determined this is happening due to a user mode driver failure. How can I best debug this issue from here? How can I figure out which driver this is related to? Will there be a Dr. Watson crash dump somewhere? Details - System - Provider [ Name] Microsoft-Windows-DriverFrameworks-UserMode [ Guid] {2E35AAEB-857F-4BEB-A418-2E6C0E54D988} EventID 10110 Version 1 Level 1 Task 64 Opcode 0 Keywords 0x2000000000000000 - TimeCreated [ SystemTime] 2012-10-29T00:51:57.532718300Z EventRecordID 40417 Correlation - Execution [ ProcessID] 1056 [ ThreadID] 3796 Channel System Computer thebrain - Security [ UserID] S-1-5-18 - UserData - UMDFHostProblem [ lifetime] {811E3DC4-FBC6-420B-ABCC-AD7505A36F3B} - Problem [ code] 3 [ detectedBy] 2 ExitCode 3 - Operation [ code] 259 Message 72448 Status 4294967295 Edit 1 So I tried using Debug View from SysInternals (you can get it here: http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx). That gave me this information: which is not especially helpful. Then I tried connecting WinDbg to WUDFHost.exe (the process that seems to host user mode drivers) to see if it could catch the error. Get it here: http://msdn.microsoft.com/en-US/windows/hardware/hh852363 Instructions: http://msdn.microsoft.com/en-US/library/windows/hardware/ff554716(v=vs.85).aspx That didn't help much. It didn't catch any exceptions as I'd hoped (which would point me to the cause of the crash at least). Here's the stack of one of the threads:

    Read the article

  • Problems starting autossh on boot [ubuntu]

    - by Ken
    I'm trying to automatically start an SSH tunnel to my server on boot from a ubuntu box. I have an ubuntu box that's mounted on an 18-wheeler and is networked behind an air card. The box hosts a mysql database that i'm trying to have replicated when the aircard is connected. As I can never be sure of my IP and how many or which routers I'm behind I'm connected to my replication server with an SSH tunnel. I got that working using the following command: ssh -R 3307:localhost:3307 [email protected] Now I'd like that to start whenever the box is, and be alive all the time, so I installed auto-ssh and setup this little script: ID=xkenneth HOST=erdosmiller.com AUTOSSH_POLL=15 AUTOSSH_PORT=20000 AUTOSSH_GATETIME=30 AUTOSSH_DEBUG=yes AUTOSSH_PATH=/usr/bin/ssh export AUTOSSH_POLL AUTOSSH_DEBUG AUTOSSH_PATH AUTOSSH_GATETIME AUTOSSH_PORT autossh -2 -fN -M 20000 -R 3307:localhost:3306 ${ID}@${HOST} I've tried putting this scrip in /etc/init.d/ and using a post-up command in /etc/network/interfaces as well as putting it in /etc/network/if-up.d/. In both situations the script starts on boot, but the tunnel doesn't appear to be correctly established. The script works when run manually.

    Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >