Search Results

Search found 9280 results on 372 pages for 'wireless card'.

Page 149/372 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

  • Lenovo Wi-Fi Replacement

    - by user22910
    I recently got my T500 with a very poor signal Wi-Fi, Thinkpad BGN, a Realtek chipset. I would like to replace my Wi-Fi card with either the Intel WiFi Link 5100 or 5300. However, I read somewhere that Lenovo specfically "whitelist" their Wi-Fi cards to only work with their laptops. I could not find any of the Intel Wi-Fi, moreover any Wi-Fi cards on the Lenovo site. So, I went to hunt around in Amazon and found several sellers. Plus what sort of card do I require? There is a difference between mini cards and the full sized card, though I do not know which one my laptop supports. Here are the specifications for my laptop: http://privatepaste.com/8b0537bce0 I would like to have confirmation which one of these specific cards as posted below will work on my laptop (or the one you recommend to have): Intel Wifi Link 5300 Intel WiFi Link 5100 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft 2.0) Intel WiFi Link 5100 - Network adapter - PCI Express Half Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft) Intel WiFi Link 5300 - Network adapter - PCI Express Mini Card - 802.11b, 802.11a, 802.11g, 802.11n (draft)

    Read the article

  • Experience with AMCC 3ware 9650se raid cards? Ours seems dead

    - by antiduh
    We have a 8-port 3ware 9650se raid card for our main disk array. We had to bring the server down for a pending power outage, and when we turned the machine back on, the raid card never started. This card has been in service for a couple years without problems, and was working up until the shutdown. Now, when we turn the machine on, the bios option rom that normally kicks in before the bootloader doesn't show up, none of the drives start, and when the OS tries to access the device, it just times out. The firmware on it has been upgraded in the past, so it's possible we've hit some sort of firmware bug. We're using it in a Silicon Mechanics R272 machine with gentoo for the OS. The OS eventually boots, but alas, without the card. We've ordered a new one, but I'm worried that if we replace the card it won't recognize the existing array. Has anybody performed a card swap before? Any help would be greatly appreciated. Edit: These are the kernel errors we see: 3ware 9000 Storage Controller device driver for Linux v2.26.02.012. 3w-9xxx 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 3w-9xxx 0000:09:00.0: setting latency timer to 64 3w-9xxx: scsi0: ERROR: (0x06:0x000D): PCI Abort: clearing. 3w-9xxx: scsi0: ERROR: (0x06:0x001F): Microcontroller not ready during reset sequence. 3w-9xxx: scsi0: ERROR: (0x06:0x0036): Response queue (large) empty failed during reset sequence. 3w-9xxx 0000:09:00.0: PCI INT A disabled

    Read the article

  • Optimal Networking Setup for a 2-Story unit?

    - by user29336
    I am moving into a 4 bedroom two-story unit. It’s roughly 2,200 sq ft. I want absolute max throughput possible to be achieved in all focal points. We’re all in internet related industries. Between gaming and web-development latency and throughput are major factors for us. Here’s our main focal points: 1) Garage (office). downstairs 2) Each bedroom x4. upstairs 3) Living room. downstairs The fastest line we can get is Comcast 50mbdown/5up (Wideband). I am looking for the best way to achieve wireless and wired performance for our setup. Our gaming computers may be in our bedroom, and we also may bring it down to the office every now and then for “LAN” sessions. Most wireless will be happening downstairs with our laptops, but since we may do LAN sessions then hard wired latency may be important there too. My concerns: If we do only wireless there would be too much latency for gaming. I don’t know if placing one D-link DGL 4500 on the top floor would be enough; which I currently own. (http://dlink.com/us/en/home-solutions/support/product/dgl-4500-xtreme-n-gaming-router) As far as I’m aware wireless signals transfer best top down. Would this wireless router be enough on top floor and that’s it? My second strategy was a combination of wiring and wireless but I’m not sure what’s easiest way to do this? This is a place we’re renting, so I’m not sure how much leeway we have with wiring, but we’re all pretty competent... if we can’t drill through a wall we can probably “stitch” them across the edges wherever needed. Thoughts on the optimal way to do this?

    Read the article

  • vyatta Server Reboots by itself

    - by Fernando
    I have an issue regarding some hardware, maybe you can help me. First, I set up a Supermicro Superserver SYS-5016I-NTF with a Intel Xeon X3470 and 4 GB of Ram with a Hotlava Card Tambora 64G4 with Intel Chipset 82599EB and 4x10G SPF+ ports. Installed Vyatta community edition 6.3. I used it as router making BGP connections with 2 operators. No load at all, temp ranges normal. But the issue is that it reboots by itself in a ramdom way. Not very often, once every few days. But it is unacceptable for production purposes. So I try to test on different hardware, and installed Vyatta community edition 6.3 on a Dell PowerEdge 2950, with Xeon(R) E5345 @ 2.33GHz and 4 GB of Ram. Same Vyatta configuration as Supermicro Server. With same hotlava Card model ( I bought two of them ) Well I have reboots with this equipment as well. Same frecuency as above. I have checked syslog no strange logs until boot process starts to be logged. So it seems server reboot suddenly. I have installed latest driver for the chipset of the Hotlava card. Servers are placed in a datacenter with UPS So finally two things in common in both servers: Hotlava Card. Someone with issues with this card, or the chipset?? Could be it this card?? Vyatta 6.3 community edition. I don't thing is the problem. Is a regular Debian with packages to glue together different services. Or maybe is something I am missing. Andy ideas, suggestions?? Thank you very much... Fernando

    Read the article

  • Weird PCI bug: lots of missed packets, or data comes in "bursts"

    - by Thomas O
    I have an ABIT KN9 motherboard. It has one PCI-e x16 slot, three PCI-e x4 slots and two legacy PCI. My problem is with the legacy PCI (which I shall just call "PCI".) I currently have an Nvidia GeForce 8600 GT (a low end card) installed in the x16 slot and a TV card in PCI #1; the x4 slots are unused, as is PCI #2. I plan to upgrade the graphics card soon, the current card was spare. I sometimes install a USB expander in PCI #2 but it causes a lot of problems - see below. The problem is under Linux (Ubuntu 10.10, Linux 2.6.35-22-generic), but probably under all operating systems (I have not yet been able to test Windows, but I suspect it will do the same as the problems occur on the BIOS/POST side too, e.g. when using a USB keyboard on the expander the keyboard will not work at all) PCI has an enourmous delay, and packets arrive in large chunks. For example, when using the USB expander, my USB mouse lags and jumps in large steps every second or so, while using the motherboard USB does not present this problem. My TV card will only do one or two frames per second, and the program (xawtv) usually times out and crashes. In dmesg, I'm getting messages like: bttv0: timeout: drop=74, irq=154/100476, risc=31f6256c, bits: VSYNC HSYNC OFLOW RISCI for my TV card, and similar timeout issues for my USB expander with a mouse. I received the motherboard, processor and RAM second hand and have only just got around to building it, so I don't know if this problem has always existed, or if it's a result of my set up. If anyone has any hints or solutions it would be appreciated - this is kind of a show-stopper for me.

    Read the article

  • Which upgrade path for disk IO bound postgres server?

    - by user41679
    Hi all, We currently have a Sun x4270 with 2xquad core Xeon Nehalmen 2.93ghz cores (16 threads), 72 gig of ram and 16 x 10k SAS disks split between the os raid 1, a partition for the Write Ahead Logs which is raid 10 and a partition for the database tables and indexes which is also raid 10, all xfs. I'm currently evaluating which path to go down in terms of upgrades. We'll be sharding the DB at some point soon, but for now I need to focus on hardware upgrades specifically. The machine is not CPU or memory bound at all at the moment, just IOWait is become an issue. The machine is mostly write access as we have a heavy caching layer. We're seeing about 300 write IOPS average on both the database partitions. We don't have any additional storage infrastructure like a Fiber Channel or ISCSI network. Budget isn't too much of a concern, something inline with the size of this server (i.e no $1m IBM machines) Space is ok on the DB side of things, we're running out obviously but there's also some reduction we can do. Additional space would be good though. My current thoughts are either: * ISCSI SAN, possible with 10Gbit network that has solid state acceleration. * FusionIO card / Sun F20 card (will the FusionIO card work in the Sun box? * DAS shelf (something like this http://www.broadberry.co.uk/das-direct-attached-storage-servers/cyberstore-224s-das) which a combination of 15k sas disks and some Intel X25-E drives for DB indexes etc) what would I need to put in the x4270 to add a DAS shelf? I think it's a SAS HBA card, do I have to use Sun's own card or will any PCI Express card work? Anything else??? what would you guys do from your experience? I appreciate it's a lot of questions, but I haven't expanded a DB machine for a number of years and the landscape has changed dramatically since then! Any advice or feedback would be very much appreciated. Let me know if there's anything else I can clarify. Thanks in advance!

    Read the article

  • Wake-on-lan only works so many times

    - by Chance
    I have Wake-on-lan configured on my Windows XP machine so that the computer will wake up from Standby. Waking the computer from Standby via network traffic seems to work a certain number of times, say 4 or 5, then it stops working. If I restart the computer it seems to reset this behavior so that I can use WOL a few more times before it starts working. I use the command "wol" on my other, Linux machine with the appropriate IP address and MAC address of the card. I looked at the network card to see if it had different lights when WOL worked and when it didn't. When it has a solid amber light where the ethernet cable connects, WOL seems to work. When it has a flashing amber light, WOL does not. It seems that the system seems to almost "shut off" the card when it falls to sleep, but I don't know if this is a function of time or number of standby/wakeups. I have a 3Com 3c920 network card. If I look at the properties in Device Manager, I have "Allow this Device to bring the Computer out of Standby" checked. In the Advanced tab I have anything related to RWU (Remote Wake Up) enabled. I also believe I have the appropriate settings in BIOS related to Remote Wake-Up and I have tried both S1 and S3 power configurations in the BIOS. Intuitively, I would think I would uncheck "Allow the Computer to turn off this device to save power", but doing so disables the "Allow this Device to bring the Computer out of Standby" option. Does anyone know what is happening here or if there is a way to fix it? I have an integrated network card; would getting one that goes into a slot be better? I am running Windows XP on a Dell Optiplex GX240 with a 3Com 3c920 network card.

    Read the article

  • How can I connect my Xbox to my Mac on my network

    - by codecowboy
    I have a wireless router/modem (Router 1) in my living room. This is connected to the internet (cable). Wireless is disabled as the router has a terrible wireless range. My Xbox is connected via ethernet to Router 1. Another LAN output from Router 1 connects to a powerline adapter. Router 1 acts as a DHCP server on 192.168.0.x and has the IP 192.168.0.1 In a second room I have Router 2. This has the powerline feed from Router 1 going into the WAN socket. This router runs the Tomato Firmware and acts as a wireless router for the rest of the house using the IP range 192.168.1.x. Router 2 IP is 192.168.1.1. My Mac is connected to Router 2 using a LAN cable and has the IP 192.168.0.133. Several mobile devices need wireless access. I want an ethernet connection to my Mac, not wireless. I should be able to use software like Connect360 to share media from my Mac to the XBox but the XBox does not see my Mac. I can ping 192.168.0.1 from the Mac. Is this possible using my current setup? If so, how?

    Read the article

  • Help finding longest non-repeating path through connected nodes - Python

    - by Jordan Magnuson
    I've been working on this for a couple of days now without success. Basically, I have a bunch of nodes arranged in a 2D matrix. Every node has four neighbors, except for the nodes on the sides and corners of the matrix, which have 3 and 2 neighbors, respectively. Imagine a bunch of square cards laid out side by side in a rectangular area--the project is actually simulating a sort of card/board game. Each node may or may not be connected to the nodes around it. Each node has a function (get_connections()), that returns the nodes immediately around it that it is connected to (so anywhere from 0 to 4 nodes are returned). Each node also has an "index" property, that contains it's position on the board matrix (eg '1, 4' - row 1, col 4). What I am trying to do is find the longest non-repeating path of connected nodes given a particular "start" node. I've uploaded a couple of images that should give a good idea of what I'm trying to do: In both images, the highlighted red cards are supposedly the longest path of connected cards containing the most upper-left card. However, you can see in both images that a couple of cards that should be in the path have been left out (Romania and Maldova in the first image, Greece and Turkey in the second) Here's the recursive function that I am using currently to find the longest path, given a starting node/card: def get_longest_trip(self, board, processed_connections = list(), processed_countries = list()): #Append this country to the processed countries list, #so we don't re-double over it processed_countries.append(self) possible_trips = dict() if self.get_connections(board): for i, card in enumerate(self.get_connections(board)): if card not in processed_countries: processed_connections.append((self, card)) possible_trips[i] = card.get_longest_trip(board, processed_connections, processed_countries) if possible_trips: longest_trip = [] for i, trip in possible_trips.iteritems(): trip_length = len(trip) if trip_length > len(longest_trip): longest_trip = trip longest_trip.append(self) return longest_trip else: print card_list = [] card_list.append(self) return card_list else: #If no connections from start_card, just return the start card #as the longest trip card_list = [] card_list.append(board.start_card) return card_list The problem here has to do with the processed_countries list: if you look at my first screenshot, you can see that what has happened is that when Ukraine came around, it looked at its two possible choices for longest path (Maldova-Romania, or Turkey, Bulgaria), saw that they were both equal, and chose one indiscriminantly. Now when Hungary comes around, it can't attempt to make a path through Romania (where the longest path would actually be), because Romania has been added to the processed_countries list by Ukraine. Any help on this is EXTREMELY appreciated. If you can find me a solution to this, recursive or not, I'd be happy to donate some $$ to you. I've uploaded my full source code (Python 2.6, Pygame 1.9 required) to: http://www.necessarygames.com/junk/planes_trains.zip The relevant code is in src/main.py, which is all set to run.

    Read the article

  • C++ enum in foreach

    - by Spencer
    I've have a card class for a blackjack game with the following enums: enum Rank { Ace, Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten, Jack, Queen, King }; enum Suit { Clubs, Diamonds, Hearts, Spades }; When I create the deck I want to write the code like this: // foreach Suit in Card::Suit // foreach Rank in Card::Rank // add new card(rank, suit) to deck I believe there is no foreach in c++. However, how do I traverse an enum? Thanks, Spencer

    Read the article

  • What's the right way to display a DBIx::Class ResultSet in my Catalyst project that uses Template To

    - by Thelema
    Given a DBIx::Class resultset, for example: my $rs = $c->model("DB::Card")->search({family_name => "Smith"}); the tutorials I've read use the stash to pass an arrayref of rows: $c->stash->{cards} = [$rs->all]; This results in the query getting executed at this point, and the resulting objects stuffed into the stash, so they can be used in TemplateToolkit as: [% FOREACH card IN cards %] [% card.given_name %] [% card.family_name %] [%END%] Is there a proper way to have TT iterate over the rows as they get fetched from the DB?

    Read the article

  • Initialize a Variable Again.

    - by SoulBeaver
    That may sound a little confusing. Basically, I have a function CCard newCard() { /* Used to store the string variables intermittantly */ std::stringstream ssPIN, ssBN; int picker1, picker2; int pin, bankNum; /* Choose 5 random variables, store them in stream */ for( int loop = 0; loop < 5; ++loop ) { picker1 = rand() % 8 + 1; picker2 = rand() % 8 + 1; ssPIN << picker1; ssBN << picker2; } /* Convert them */ ssPIN >> pin; ssBN >> bankNum; CCard card( pin, bankNum ); return card; } that creates a new CCard variable and returns it to the caller CCard card = newCard(); My teacher advised me that doing this is a violation of OOP principles and has to be put in the class. He told me to use this method as a constructor. Which I did: CCard::CCard() { m_Sperre = false; m_Guthaben = rand() % 1000; /* Work */ /* Convert them */ ssPIN >> m_Geheimzahl; ssBN >> m_Nummer; } All variables with m_ are member variables. However, the constructor works when I initialize the card normally CCard card(); at the start of the program. However, I also have a function, that is supposed to create a new card and return it to the user, this function is now broken. The original command: card = newCard(); isn't available anymore, and card = new CCard(); doesn't work. What other options do I have? I have a feeling using the constructor won't work, and that I probably should just create a class method newCard, but I want to see if it is somehow at all possible to do it the way the teacher wanted. This is creating a lot of headaches for me. I told the teacher that this is a stupid idea and not everything has to be classed in OOP. He has since told me that Java or C# don't allow code outside of classes, which sounds a little incredible. Not sure that you can do this in C++, especially when templated functions exist, or generic algorithms. Is it true that this would be bad code for OOP in C++ if I didn't force it into a class?

    Read the article

  • Easy Regex question

    - by Aaron
    Trying to replace the first 12 digits of credit card numbers with X's in a predictable blob of text that contains the string: Credit Card Number: 1234123412341234 Here's my PHP function: preg_replace('/Credit Card Number: ([0-9]{12})/','Credit Card Number: XXXXXXXXXXXX',$str); Help?

    Read the article

  • Problem installing Cardbus/PCMCIA drivers (USB 2.0 2-port)

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Device Manager - does USB listing look right?

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Problem with USB drivers (Windows-XP)

    - by Carl
    I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

    Read the article

  • Logitech USB headphones detected and selected in Debian Squeeze but sound still coming from speakers

    - by mattalexx
    I have a pair of Logitech wireless USB headphones that work with Ubuntu Natty but aren't working in Debian Squeeze. When they are selected as the default audio output, the sound comes out of the speakers instead of the headphones. I have rebooted and tried using a different USB port. My computer is a Thinkpad T510. How can I fix this problem? Here is lsusb: Bus 002 Device 005: ID 046d:0a29 Logitech, Inc. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 046d:c52f Logitech, Inc. Wireless Mouse M305 Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Here is cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xf2420000 irq 17 1 [Headset ]: USB-Audio - Logitech Wireless Headset Logitech Logitech Wireless Headset at usb-0000:00:1d.0-1.1, full speed 2 [NVidia ]: HDA-Intel - HDA NVidia HDA NVidia at 0xcdefc000 irq 17 Here is the gnome-volume-control GUI: Here's lsmod | grep usb: snd_usb_audio 50670 0 snd_usb_lib 11192 1 snd_usb_audio usbhid 28008 0 hid 50909 1 usbhid snd_rawmidi 12513 2 snd_usb_lib,snd_seq_midi snd_hwdep 4054 2 snd_usb_audio,snd_hda_codec snd_pcm 47226 3 snd_usb_audio,snd_hda_intel,snd_hda_codec usbcore 98969 5 snd_usb_audio,snd_usb_lib,usbhid,ehci_hcd snd 34423 11 snd_usb_audio,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device nls_base 4541 1 usbcore Here's cat /etc/modprobe.d/alsa-base.conf: # autoloader aliases install sound-slot-0 /sbin/modprobe snd-card-0 install sound-slot-1 /sbin/modprobe snd-card-1 install sound-slot-2 /sbin/modprobe snd-card-2 install sound-slot-3 /sbin/modprobe snd-card-3 install sound-slot-4 /sbin/modprobe snd-card-4 install sound-slot-5 /sbin/modprobe snd-card-5 install sound-slot-6 /sbin/modprobe snd-card-6 install sound-slot-7 /sbin/modprobe snd-card-7 # Cause optional modules to be loaded above generic modules install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; } install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && { /sbin/modprobe --quiet snd-seq-midi ; : ; } install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && { /sbin/modprobe --quiet snd-emu10k1-synth ; : ; } # Prevent abnormal drivers from grabbing index 0 options bt87x index=-2 options cx88_alsa index=-2 options snd-atiixp-modem index=-2 options snd-intel8x0m index=-2 options snd-via82xx-modem index=-2 # Keep snd-pcsp from beeing loaded as first soundcard options snd-pcsp index=-2 # Keep snd-usb-audio from beeing loaded as first soundcard options snd-usb-audio index=-2 EDIT In VLC, I reset VLC prefs (Output: Default) and sound still comes out of speakers as expected. Then I change it to "Output: ALSA Audio output" and a Device menu appears. I select the headphones. When I then save the prefs, the audio switch to the headphones! But here's what's weird: I go back to prefs, change it to "Output: Default" and the headphones keep working. Maybe the ALSA option is actually what is being chosen as the "Default" option, but the Device menu (whose selection is still being used) is still set to the headphones. Anyway, now I need to figure out how to make it work as the default for the whole system.

    Read the article

  • iPhone Horizontal Scrolling Table

    - by Wireless Designs
    Hello all - I need to create a view on the iPhone that scrolls horizontally through a gallery of images. The issue is that this gallery has the potential to have 100s to 1000s of images that needs to be presented, so I would like to avoid loading them all into a single UIScrollView at once and destroying performance. I need to create a view that recycles the view objects (like UITableView) to increase performance and reduce memory overhead, but it needs to scroll in a horizontal fashion. Any ideas? Is it possible to make UITableView operation horizontally? Thanks!

    Read the article

  • What is a Delphi version of the C++ header for the DVP7010B video card DLL?

    - by grzegorz1
    I need help with converting c++ header file to delphi. I spent several days on this problem without success. Below is the original header file and my Delphi translation. C++ header #if _MSC_VER > 1000 #pragma once #endif // _MSC_VER > 1000 #ifdef DVP7010BDLL_EXPORTS #define DVP7010BDLL_API __declspec(dllexport) #else #define DVP7010BDLL_API __declspec(dllimport) #endif #define MAXBOARDS 4 #define MAXDEVS 4 #define ID_NEW_FRAME 37810 #define ID_MUX0_NEW_FRAME 37800 #define ID_MUX1_NEW_FRAME 37801 #define ID_MUX2_NEW_FRAME 37802 #define ID_MUX3_NEW_FRAME 37803 typedef enum { SUCCEEDED = 1, FAILED = 0, SDKINITFAILED = -1, PARAMERROR = -2, NODEVICES = -3, NOSAMPLE = -4, DEVICENUMERROR = -5, INPUTERROR = -6, // VERIFYHWERROR = -7 } Res; typedef enum tagAnalogVideoFormat { Video_None = 0x00000000, Video_NTSC_M = 0x00000001, Video_NTSC_M_J = 0x00000002, Video_PAL_B = 0x00000010, Video_PAL_M = 0x00000200, Video_PAL_N = 0x00000400, Video_SECAM_B = 0x00001000 } AnalogVideoFormat; typedef enum { SIZEFULLPAL=0, SIZED1, SIZEVGA, SIZEQVGA, SIZESUBQVGA } VideoSize; typedef enum { STOPPED = 1, RUNNING = 2, UNINITIALIZED = -1, UNKNOWNSTATE = -2 } CapState; class IDVP7010BDLL { public: int AdvDVP_CreateSDKInstence(void **pp); virtual int AdvDVP_InitSDK() PURE; virtual int AdvDVP_CloseSDK() PURE; virtual int AdvDVP_GetNoOfDevices(int *pNoOfDevs) PURE; virtual int AdvDVP_Start(int nDevNum, int SwitchingChans, HWND Main, HWND hwndPreview) PURE; virtual int AdvDVP_Stop(int nDevNum) PURE; virtual int AdvDVP_GetCapState(int nDevNum) PURE; virtual int AdvDVP_IsVideoPresent(int nDevNum, BOOL* VPresent) PURE; virtual int AdvDVP_GetCurFrameBuffer(int nDevNum, int VMux, long* bufSize, BYTE* buf) PURE; virtual int AdvDVP_SetNewFrameCallback(int nDevNum, int callback) PURE; virtual int AdvDVP_GetVideoFormat(int nDevNum, AnalogVideoFormat* vFormat) PURE; virtual int AdvDVP_SetVideoFormat(int nDevNum, AnalogVideoFormat vFormat) PURE; virtual int AdvDVP_GetFrameRate(int nDevNum, int *nFrameRate) PURE; virtual int AdvDVP_SetFrameRate(int nDevNum, int SwitchingChans, int nFrameRate) PURE; virtual int AdvDVP_GetResolution(int nDevNum, VideoSize *Size) PURE; virtual int AdvDVP_SetResolution(int nDevNum, VideoSize Size) PURE; virtual int AdvDVP_GetVideoInput(int nDevNum, int* input) PURE; virtual int AdvDVP_SetVideoInput(int nDevNum, int input) PURE; virtual int AdvDVP_GetBrightness(int nDevNum, int input, long *pnValue) PURE; virtual int AdvDVP_SetBrightness(int nDevNum, int input, long nValue) PURE; virtual int AdvDVP_GetContrast(int nDevNum, int input, long *pnValue) PURE; virtual int AdvDVP_SetContrast(int nDevNum, int input, long nValue) PURE; virtual int AdvDVP_GetHue(int nDevNum, int input, long *pnValue) PURE; virtual int AdvDVP_SetHue(int nDevNum, int input, long nValue) PURE; virtual int AdvDVP_GetSaturation(int nDevNum, int input, long *pnValue) PURE; virtual int AdvDVP_SetSaturation(int nDevNum, int input, long nValue) PURE; virtual int AdvDVP_GPIOGetData(int nDevNum, int DINum, BOOL* value) PURE; virtual int AdvDVP_GPIOSetData(int nDevNum, int DONum, BOOL value) PURE; }; Delphi unit IDVP7010BDLL_h; interface uses Windows, Messages, SysUtils, Classes; //{$if _MSC_VER > 1000} //pragma once //{$endif} // _MSC_VER > 1000 {$ifdef DVP7010BDLL_EXPORTS} //const DVP7010BDLL_API = __declspec(dllexport); {$else} //const DVP7010BDLL_API = __declspec(dllimport); {$endif} const MAXDEVS = 4; MAXMUXS = 4; ID_NEW_FRAME = 37810; ID_MUX0_NEW_FRAME = 37800; ID_MUX1_NEW_FRAME = 37801; ID_MUX2_NEW_FRAME = 37802; ID_MUX3_NEW_FRAME = 37803; // TRec SUCCEEDED = 1; FAILED = 0; SDKINITFAILED = -1; PARAMERROR = -2; NODEVICES = -3; NOSAMPLE = -4; DEVICENUMERROR = -5; INPUTERROR = -6; // TRec // TAnalogVideoFormat Video_None = $00000000; Video_NTSC_M = $00000001; Video_NTSC_M_J = $00000002; Video_PAL_B = $00000010; Video_PAL_M = $00000200; Video_PAL_N = $00000400; Video_SECAM_B = $00001000; // TAnalogVideoFormat // TCapState STOPPED = 1; RUNNING = 2; UNINITIALIZED = -1; UNKNOWNSTATE = -2; // TCapState type TCapState = Longint; TRes = Longint; TtagAnalogVideoFormat = DWORD; TAnalogVideoFormat = TtagAnalogVideoFormat; PAnalogVideoFormat = ^TAnalogVideoFormat; TVideoSize = ( SIZEFULLPAL, SIZED1, SIZEVGA, SIZEQVGA, SIZESUBQVGA); PVideoSize = ^TVideoSize; P_Pointer = ^Pointer; TIDVP7010BDLL = class function AdvDVP_CreateSDKInstence(pp: P_Pointer): integer; virtual; stdcall; abstract; function AdvDVP_InitSDK():Integer; virtual; stdcall; abstract; function AdvDVP_CloseSDK():Integer; virtual; stdcall; abstract; function AdvDVP_GetNoOfDevices(pNoOfDevs : PInteger) :Integer; virtual; stdcall; abstract; function AdvDVP_Start(nDevNum : Integer; SwitchingChans : Integer; Main : HWND; hwndPreview: HWND ) :Integer; virtual; stdcall; abstract; function AdvDVP_Stop(nDevNum : Integer ):Integer; virtual; stdcall; abstract; function AdvDVP_GetCapState(nDevNum : Integer ):Integer; virtual; stdcall; abstract; function AdvDVP_IsVideoPresent(nDevNum : Integer; VPresent : PBool) :Integer; virtual; stdcall; abstract; function AdvDVP_GetCurFrameBuffer(nDevNum : Integer; VMux : Integer; bufSize : PLongInt; buf : PByte) :Integer; virtual; stdcall; abstract; function AdvDVP_SetNewFrameCallback(nDevNum : Integer; callback : Integer ) :Integer; virtual; stdcall; abstract; function AdvDVP_GetVideoFormat(nDevNum : Integer; vFormat : PAnalogVideoFormat) :Integer; virtual; stdcall; abstract; function AdvDVP_SetVideoFormat(nDevNum : Integer; vFormat : TAnalogVideoFormat ) :Integer; virtual; stdcall; abstract; function AdvDVP_GetFrameRate(nDevNum : Integer; nFrameRate : Integer) :Integer; virtual; stdcall; abstract; function AdvDVP_SetFrameRate(nDevNum : Integer; SwitchingChans : Integer; nFrameRate : Integer) :Integer; virtual; stdcall; abstract; function AdvDVP_GetResolution(nDevNum : Integer; Size : PVideoSize) :Integer; virtual; stdcall; abstract; function AdvDVP_SetResolution(nDevNum : Integer; Size : TVideoSize ) :Integer; virtual; stdcall; abstract; function AdvDVP_GetVideoInput(nDevNum : Integer; input : PInteger) :Integer; virtual; stdcall; abstract; function AdvDVP_SetVideoInput(nDevNum : Integer; input : Integer) :Integer; virtual; stdcall; abstract; function AdvDVP_GetBrightness(nDevNum : Integer; input: Integer; pnValue : PLongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_SetBrightness(nDevNum : Integer; input: Integer; nValue : LongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_GetContrast(nDevNum : Integer; input: Integer; pnValue : PLongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_SetContrast(nDevNum : Integer; input: Integer; nValue : LongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_GetHue(nDevNum : Integer; input: Integer; pnValue : PLongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_SetHue(nDevNum : Integer; input: Integer; nValue : LongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_GetSaturation(nDevNum : Integer; input: Integer; pnValue : PLongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_SetSaturation(nDevNum : Integer; input: Integer; nValue : LongInt) :Integer; virtual; stdcall; abstract; function AdvDVP_GPIOGetData(nDevNum : Integer; DINum:Integer; value : PBool) :Integer; virtual; stdcall; abstract; function AdvDVP_GPIOSetData(nDevNum : Integer; DONum:Integer; value : Boolean) :Integer; virtual; stdcall; abstract; end; function IDVP7010BDLL : TIDVP7010BDLL ; stdcall; implementation function IDVP7010BDLL; external 'DVP7010B.dll'; end.

    Read the article

  • Sharing a UIView between UIViewControllers in a UITabBarController

    - by Wireless Designs
    Hi all - I have a UIScrollView that houses a gallery of images the user can scroll through. This view needs to be visible on each of three separate UIViewControllers that are housed within a UITabBarController. Right now, I have three separate UIScrollView instances in the UITabBarController subclass, and the controller manages keeping the three synchronized (when a user scrolls the one they can see, programmatically scrolling the other two to match, etc.), which is not ideal. I would like to know if there is a way to work with only ONE instance of the UIScrollView, but have it show up only in the UIViewController that the user is currently interacting with. This would completely eliminate all the synchronization code. Here is basically what I have now in the UITabBarController (which is where all this is currently managed): @interface ScrollerTabBarController : UITabBarController { FirstViewController *firstView; SecondViewController *secondView; ThirdViewController *thirdView; UIScrollView *scrollerOne; UIScrollView *scrollerTwo; UIScrollView *scrollerThree; } @property (nonatomic,retain) IBOutlet FirstViewController *firstView; @property (nonatomic,retain) IBOutlet SecondViewController *secondView; @property (nonatomic,retain) IBOutlet ThirdViewController *thirdView; @property (nonatomic,retain) IBOutlet UIScrollView *scrollerOne; @property (nonatomic,retain) IBOutlet UIScrollView *scrollerTwo; @property (nonatomic,retain) IBOutlet UIScrollView *scrollerThree; @end @implementation ScrollerTabBarController - (void)layoutScroller:(UIScrollView *)scroller {} - (void)scrollToMatch:(UIScrollView *)scroller {} - (void)viewDidLoad { [self layoutScroller:scrollerOne]; [self layoutScroller:scrollerTwo]; [self layoutScroller:scrollerThree]; [scrollerOne setDelegate:self]; [scrollerTwo setDelegate:self]; [scrollerThree setDelegate:self]; [firstView setGallery:scrollerOne]; [secondView setGallery:scrollerTwo]; [thirdView setGallery:scrollerThree]; } - (void)scrollViewDidEndDecelerating:(UIScrollView *)scrollView { [self scrollToMatch:scrollView]; } @end The UITabBarController gets notified (as the scroll view's delegate) when the user scrolls one of the instances, and then calls methods like scrollToMatch: to sync up the other two with the user's choice. Is there something that can be done, using a many-to-one relationship on IBOutlet or something like that, to narrow this down to one instance so I'm not having to manage three scroll views? I tried keeping a single instance and moving the pointer from one view to the next using the UITabBarControllerDelegate methods (calling setGallery:nil on the current and setGallery:scrollerOne on the next each time it changed), but the scroller never moved to the other tabs. Thanks in advance!

    Read the article

  • memory available to 64bit Fedora guest under 32bit XP host running virtualbox

    - by Chris Card
    I have successfully installed a 64 bit Fedora 11 guest os using VirtualBox on a host machine (AMD64) running 32 bit Windows XP . At the moment the host machine has 2 Gb ram installed and I've allocated 1 Gb to the guest, which all works well. The host machine can hold a maximum of 4 Gb ram, so I was wondering if it's worth buying an extra 2 Gb for it. I know that 32 bit Windows XP can't use all of the 4 Gb, but can the guest os use any of the ram that the host os can't use?

    Read the article

  • Is JavaFx suitable for creating online multiplayer board/card games?

    - by Piniu
    In JavaFx i can easy create animations, moving pieces etc., but as far as i see there is better to write program logic and communication in java. Worst i see at the moment is calling javafx part as a result of data incoming from server. Is there any convenient way to do it or its better to change to other technology (flex, qt?) assuming it is not important if program will run in browser or outside as a standalone application? I just started to learn javafx but can drop it and move to other technology and consider c++ + wxWidgets or Qt which im more comforatable with.

    Read the article

  • create a dict of lists from a string

    - by Chris Card
    I want to convert a string such as 'a=b,a=c,a=d,b=e' into a dict of lists {'a': ['b', 'c', 'd'], 'b': ['e']} in Python 2.6. My current solution is this: def merge(d1, d2): for k, v in d2.items(): if k in d1: if type(d1[k]) != type(list()): d1[k] = list(d1[k]) d1[k].append(v) else: d1[k] = list(v) return d1 record = 'a=b,a=c,a=d,b=e' print reduce(merge, map(dict,[[x.split('=')] for x in record.split(',')])) which I'm sure is unnecessarily complicated. Any better solutions?

    Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >