Search Results

Search found 395 results on 16 pages for 'acquire'.

Page 15/16 | < Previous Page | 11 12 13 14 15 16  | Next Page >

  • No warning from gcc when function definition in linked source different from function prototype in h

    - by c_c
    Hi, I had a problem with a part of my code, which after some iterations seemed to read NaN as value of a int of a struct. I think I found the error, but am still wondering why gcc (version 3.2.3 on a embedded Linux with busybox) did not warn me. Here are the important parts of the code: A c file and its header for functions to acquire data over USB: // usb_control.h typedef struct{ double mean; short *values; } DATA_POINTS; typedef struct{ int size; DATA_POINTS *channel1; //....7 more channels } DATA_STRUCT; DATA_STRUCT *create_data_struct(int N); // N values per channel int free_data_struct(DATA_STRUCT *data); int aqcu_data(DATA_STRUCT *data, int N); A c and header file with helper function (math, bitshift,etc...): // helper.h int mean(DATA_STRUCT *data); // helper.c (this is where the error is obviously) double mean(DATA_STRUCT *data) { // sum in for loop data->channel1->mean = sum/data->N; // ...7 more channels // a printf here displayed the mean values corretly } The main file // main.c #include "helper.h" #include "usb_control.h" // Allocate space for data struct DATA_STRUCT *data = create_data_struct(N); // get data for different delays for (delay = 0; delay < 500; delay += pw){ acqu_data(data, N); mean(data); // printf of the mean values first is correct. Than after 5 iterations // it is always NaN for channel1. The other channels are displayed correctly; } There were no segfaults nor any other missbehavior, just the NaN for channel1 in the main file. After finding the error, which was not easy, it was of course east to fix. The return type of mean(){} was wrong in the definition. Instead of double mean() it has to be int mean() as the prototype defines. When all the functions are put into one file, gcc warns me that there is a redefinition of the function mean(). But as I compile each c file seperately and link them afterwards gcc seems to miss that. So my questions would be. Why didn't I get any warnings, even non with gcc -Wall? Or is there still another error hidden which is just not causing problems now? Regards, christian

    Read the article

  • Network authentication + roaming home directory - which technology should I look into using?

    - by Brian
    I'm looking into software which provides a user with a single identity across multiple computers. That is, a user should have the same permissions on each computer, and the user should have access to all of his or her files (roaming home directory) on each computer. There seem to be many solutions for this general idea, but I'm trying to determine the best one for me. Here are some details along with requirements: The network of machines are Amazon EC2 instances running Ubuntu. We access the machines with SSH. Some machines on this LAN may have different uses, but I am only discussing machines for a certain use (running a multi-tenancy platform). The system will not necessarily have a constant amount of machines. We may have to permanently or temporarily alter the amount of machines running. This is the the reason why I'm looking into centralized authentication/storage. The implementation of this effect should be a secure one. We're unsure if users will have direct shell access, but their software will potentially be running (under restricted Linux user names, of course) on our systems, which is as good as direct shell access. Let's assume that their software could potentially be malicious for the sake of security. I have heard of several technologies/combinations to achieve my goal, but I'm unsure of the ramifications of each. An older ServerFault post recommended NFS & NIS, though the combination has security problems according to this old article by Symantec. The article suggests moving to NIS+, but, as it is old, this Wikipedia article has cited statements suggesting a trending away from NIS+ by Sun. The recommended replacement is another thing I have heard of... LDAP. It looks like LDAP can be used to save user information in a centralized location on a network. NFS would still need to be used to cover the 'roaming home folder' requirement, but I see references of them being used together. Since the Symantec article pointed out security problems in both NIS and NFS, is there software to replace NFS, or should I heed that article's suggestions for locking it down? I'm tending toward LDAP because another fundamental piece of our architecture, RabbitMQ, has a authentication/authorization plugin for LDAP. RabbitMQ will be accessible in a restricted manner to users on the system, so I would like to tie the security systems together if possible. Kerberos is another secure authentication protocol that I have heard of. I learned a bit about it some years ago in a cryptography class but don't remember much about it. I have seen suggestions online that it can be combined with LDAP in several ways. Is this necessary? What are the security risks of LDAP without Kerberos? I also remember Kerberos being used in another piece of software developed by Carnegie Mellon University... Andrew File System, or AFS. OpenAFS is available for use, though its setup seems a bit complicated. At my university, AFS provides both requirements... I can log in to any machine, and my "AFS folder" is always available (at least when I acquire an AFS token). Along with suggestions for which path I should look into, does anybody have any guides which were particularly helpful? As the bold text pointed out, LDAP looks to be the best choice, but I'm particularly interested in the implementation details (Keberos? NFS?) with respect to security.

    Read the article

  • unattended-upgrades does not reboot

    - by Cheiron
    I am running Debian 7 stable with unattended-upgrades (every morning at 6 AM) to make sure I am always fully updated. I have the following config: $ cat /etc/apt/apt.conf.d/50unattended-upgrades // Automatically upgrade packages from these origin patterns Unattended-Upgrade::Origins-Pattern { // Archive or Suite based matching: // Note that this will silently match a different release after // migration to the specified archive (e.g. testing becomes the // new stable). "o=Debian,a=stable"; "o=Debian,a=stable-updates"; // "o=Debian,a=proposed-updates"; "origin=Debian,archive=stable,label=Debian-Security"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { // "vim"; // "libc6"; // "libc6-dev"; // "libc6-i686"; }; // This option allows you to control if on a unclean dpkg exit // unattended-upgrades will automatically run // dpkg --force-confold --configure -a // The default is true, to ensure updates keep getting installed //Unattended-Upgrade::AutoFixInterruptedDpkg "false"; // Split the upgrade into the smallest possible chunks so that // they can be interrupted with SIGUSR1. This makes the upgrade // a bit slower but it has the benefit that shutdown while a upgrade // is running is possible (with a small delay) //Unattended-Upgrade::MinimalSteps "true"; // Install all unattended-upgrades when the machine is shuting down // instead of doing it in the background while the machine is running // This will (obviously) make shutdown slower //Unattended-Upgrade::InstallOnShutdown "true"; // Send email to this address for problems or packages upgrades // If empty or unset then no email is sent, make sure that you // have a working mail setup on your system. A package that provides // 'mailx' must be installed. E.g. "[email protected]" Unattended-Upgrade::Mail "root"; // Set this value to "true" to get emails only on errors. Default // is to always send a mail if Unattended-Upgrade::Mail is set Unattended-Upgrade::MailOnlyOnError "true"; // Do automatic removal of new unused dependencies after the upgrade // (equivalent to apt-get autoremove) //Unattended-Upgrade::Remove-Unused-Dependencies "false"; // Automatically reboot *WITHOUT CONFIRMATION* if a // the file /var/run/reboot-required is found after the upgrade Unattended-Upgrade::Automatic-Reboot "true"; // Use apt bandwidth limit feature, this example limits the download // speed to 70kb/sec //Acquire::http::Dl-Limit "70"; As you can see Automatic-Reboot is true and thus the server should automaticly reboot. Last time I checked the server was online for over 100 days, which means that the update from Debian 7.1 to Debian 7.2 has happened while the server was up (and indeed, all updates were installed), but this involves kernel updates, which means that the server should reboot. It did not. The server was running very slow, so I rebooted which fixed that. I did some research and found out that unattended-upgrades responds to the reboot-required file in /var/run/. I touched this file and waited one week, the file still exists and the server did not reboot. So I think that unattended-uppgrades ignores the auto-reboot part. So, am I doing somthing wrong here? Why did the server not restart? The upgrade part works perfect by the way, its just the reboot part that does not seem to work as it should.

    Read the article

  • Where to download replacement "Explorerframe.DLL" Files for x64 Windows 7 Pro?

    - by Ben Franchuk
    After posting this question, I did some research to reveal what the problem likely was, and found what I need to fix. Following this is the original post, then my updated question. A few months ago I ended up requiring to change my computer's SID to fix a problem it had been having- Instead of fixing the problem, though, it screwed up my at-the-time current install of windows, to the point of me needing to do a fresh install. As I am in possession of an OEM copy of Windows 7 Pro 64 Bit, I successfully reinstalled over the dead copy with that (all the files that were on the computer previous to this windows install were put in a Windows.old folder). Everything installed and worked absolutely fine, except for one thing. The problem I am experiencing is that, in some Windows Explorer windows, the explorer pane doesn't show. Instead, it simply shows a white area where the pane would show. This makes some software not usable, I recently realized; Software such as Cubase, which use just the explorer pane to select file save locations, cannot save at all as the pane itself is... not operational. Below is a screenshot of this problem as it occurs in cubase; ...and again as it shows in UTorrent in the save location selector window. The highlighted area is where the sidebar would NORMALLY be. Pardon my scribbling over some of the things in the window- I would personally rather the internet did not get a glimpse of my files. I have yet to find a common reason why the pane works in some applications when they pull explorer, and others not. I have yet to see it go away, and the software affected by it has been affected since I reinstalled my copy of windows. Initially, I was able to live with it as I can type out save locations in the file name bar to navigate, but with software like Cubase, I do not have this option. Reinstalling windows again is NOT an option. Here's the updated question. After posting this question originally, I did some research on the problem in question, and it turns out that this is extremely easily fixable via replacing the file "ExplorerFrame.DLL" which is located in the System32 and SystemWOW64 Folders, in the windows folder, on the C:\ drive. As I quite frequently customize my computer, this is a normal thing for me to do and I know exactly how to safely and properly replace this file. The only problem is that I cannot for the life of me find a download of this file that actually works with my computer. I tried a couple from some different sites but they all caused explorer to not restart (I was given an error when starting the application from Task Manager) and was forced to revert to the broken .DLL files. Since there are 2 separate "ExplorerFrame.DLL" files; one for 64 bit and the other for 32 bit, I am assuming that I will need to download 2 separate versions to replace the corrupted ones. Where can I acquire these files? I am currently running Windows 7 Professional x64 Bit.

    Read the article

  • I have finally traded my Blackberry in for a Droid!

    - by Bob Porter
    Over the years I have used a number of different types of phones. Windows Mobile, Blackberry, Nokia, and now Android. Until the Blackberry, which was my last phone (and I still have one issued from my office) I had never found a phone that “just worked” especially with email and messaging. The Blackberry did, and does, excel at those functions. My last personal phone was a Storm 1 which was Blackberry’s first touch screen phone. The Storm 2 was an improved version that fixed some screen press detection issues from the first model and it added Wifi. Over the last few years I have watched others acquire and fall in love with their ‘Droid’s including a number of iPhone users which surprised me. Our office has until recently only supported Blackberry phones, adding iPhones within the last year or so. When I spoke with our internal telecom folks they confirmed they were evaluating Android phones, but felt they still were not secure enough out of the box for corporate use and SOX compliance. That being said, as a personal phone, the Droid Rocks! I am impressed with its speed, the number of apps available, and the overall design. It is not as “flashy” as an iPhone but it does everything that I care about and more. The model I bought is the Motorola Droid 2 Global from Verizon. It is currently running Android 2.2 for it’s OS, 2.3 is just around the corner. It has 8 gigs of internal flash memory and can handle up to a 32 gig SDCard. (I currently have 2 8 gig cards, one for backups, and have ordered a 16 gig card!) Being a geek at heart, I “rooted” the phone which means gained superuser access to the OS on the phone. And opens a number of doors for further modifications down the road. Also being a geek meant I have already setup a development environment and built and deployed the obligatory “Hello Droid” application. I will be writing of my development experiences with this new platform here often, to start off I thought I would share my current application list to give you an idea what I am using. Zedge: http://market.android.com/details?id=net.zedge.android XDA: http://market.android.com/details?id=com.quoord.tapatalkxda.activity WRAL.com: http://market.android.com/details?id=com.mylocaltv.wral Wireless Tether: http://market.android.com/details?id=android.tether Winamp: http://market.android.com/details?id=com.nullsoft.winamp Win7 Clock: http://market.android.com/details?id=com.androidapps.widget.toggles.win7 Wifi Analyzer: http://market.android.com/details?id=com.farproc.wifi.analyzer WeatherBug: http://market.android.com/details?id=com.aws.android Weather Widget Forecast Addon: http://market.android.com/details?id=com.androidapps.weather.forecastaddon Weather & Toggle Widgets: http://market.android.com/details?id=com.androidapps.widget.weather2 Vlingo: http://market.android.com/details?id=com.vlingo.client VirtualTENHO-G: http://market.android.com/details?id=jp.bustercurry.virtualtenho_g Twitter: http://market.android.com/details?id=com.twitter.android TweetDeck: http://market.android.com/details?id=com.thedeck.android.app Tricorder: http://market.android.com/details?id=org.hermit.tricorder Titanium Backup PRO: http://market.android.com/details?id=com.keramidas.TitaniumBackupPro Titanium Backup: http://market.android.com/details?id=com.keramidas.TitaniumBackup Terminal Emulator: http://market.android.com/details?id=jackpal.androidterm Talking Tom Free: http://market.android.com/details?id=com.outfit7.talkingtom Stock Blue: http://market.android.com/details?id=org.adw.theme.stockblue ST: Red Alert Free: http://market.android.com/details?id=com.oldplanets.redalertwallpaper ST: Red Alert: http://market.android.com/details?id=com.oldplanets.redalertwallpaperplus Solitaire: http://market.android.com/details?id=com.kmagic.solitaire Skype: http://market.android.com/details?id=com.skype.raider Silent Time Lite: http://market.android.com/details?id=com.QuiteHypnotic.SilentTime ShopSavvy: http://market.android.com/details?id=com.biggu.shopsavvy Shopper: http://market.android.com/details?id=com.google.android.apps.shopper Shiny clock: http://market.android.com/details?id=com.androidapps.clock.shiny ShareMyApps: http://market.android.com/details?id=com.mattlary.shareMyApps Sense Glass ADW Theme: http://market.android.com/details?id=com.dtanquary.senseglassadwtheme ROM Manager: http://market.android.com/details?id=com.koushikdutta.rommanager Roboform Bookmarklet Installer: http://market.android.com/details?id=roboformBookmarkletInstaller.android.com RealCalc: http://market.android.com/details?id=uk.co.nickfines.RealCalc Package Buddy: http://market.android.com/details?id=com.psyrus.packagebuddy Overstock: http://market.android.com/details?id=com.overstock OMGPOP Toggle: http://market.android.com/details?id=com.androidapps.widget.toggle.omgpop OI File Manager: http://market.android.com/details?id=org.openintents.filemanager nook: http://market.android.com/details?id=bn.ereader MyAtlas-Google Maps Navigation ext: http://market.android.com/details?id=com.adaptdroid.navbookfree3 MSN Droid: http://market.android.com/details?id=msn.droid.im Matrix Live Wallpaper: http://market.android.com/details?id=com.jarodyv.livewallpaper.matrix LogMeIn: http://market.android.com/details?id=com.logmein.ignitionpro.android Liveshare: http://market.android.com/details?id=com.cooliris.app.liveshare Kobo: http://market.android.com/details?id=com.kobobooks.android Instant Heart Rate: http://market.android.com/details?id=si.modula.android.instantheartrate IMDb: http://market.android.com/details?id=com.imdb.mobile Home Plus Weather: http://market.android.com/details?id=com.androidapps.widget.skin.weather.homeplus Handcent SMS: http://market.android.com/details?id=com.handcent.nextsms H7C Clock: http://market.android.com/details?id=com.androidapps.widget.clock.skin.h7c GTasks: http://market.android.com/details?id=org.dayup.gtask GPS Status: http://market.android.com/details?id=com.eclipsim.gpsstatus2 Google Voice: http://market.android.com/details?id=com.google.android.apps.googlevoice Google Sky Map: http://market.android.com/details?id=com.google.android.stardroid Google Reader: http://market.android.com/details?id=com.google.android.apps.reader GoMarks: http://market.android.com/details?id=com.androappsdev.gomarks Goggles: http://market.android.com/details?id=com.google.android.apps.unveil Glossy Black Weather: http://market.android.com/details?id=com.androidapps.widget.weather.skin.glossyblack Fox News: http://market.android.com/details?id=com.foxnews.android Foursquare: http://market.android.com/details?id=com.joelapenna.foursquared FBReader: http://market.android.com/details?id=org.geometerplus.zlibrary.ui.android Fandango: http://market.android.com/details?id=com.fandango Facebook: http://market.android.com/details?id=com.facebook.katana Extensive Notes Pro: http://market.android.com/details?id=com.flufflydelusions.app.extensive_notes_donate Expense Manager: http://market.android.com/details?id=com.expensemanager Espresso UI (LightShow w/ Slide): http://market.android.com/details?id=com.jaguirre.slide.lightshow Engadget: http://market.android.com/details?id=com.aol.mobile.engadget Earth: http://market.android.com/details?id=com.google.earth Drudge: http://market.android.com/details?id=com.iavian.dreport Dropbox: http://market.android.com/details?id=com.dropbox.android DroidForums: http://market.android.com/details?id=com.quoord.tapatalkdrodiforums.activity DroidArmor ADW: http://market.android.com/details?id=mobi.addesigns.droidarmorADW Droid Weather Icons: http://market.android.com/details?id=com.androidapps.widget.weather.skins.white Droid 2 Bootstrapper: http://market.android.com/details?id=com.koushikdutta.droid2.bootstrap doubleTwist: http://market.android.com/details?id=com.doubleTwist.androidPlayer Documents To Go: http://market.android.com/details?id=com.dataviz.docstogo Digital Clock Widget: http://market.android.com/details?id=com.maize.digitalClock Desk Home: http://market.android.com/details?id=com.cowbellsoftware.deskdock Default Clock: http://market.android.com/details?id=com.androidapps.widget.clock.skins.defaultclock Daily Expense Manager: http://market.android.com/details?id=com.techahead.ExpenseManager ConnectBot: http://market.android.com/details?id=org.connectbot Colorized Weather Icons: http://market.android.com/details?id=com.androidapps.widget.weather.colorized Chrome to Phone: http://market.android.com/details?id=com.google.android.apps.chrometophone CardStar: http://market.android.com/details?id=com.cardstar.android Books: http://market.android.com/details?id=com.google.android.apps.books Black Ipad Toggle: http://market.android.com/details?id=com.androidapps.toggle.widget.skin.blackipad Black Glass ADW Theme: http://market.android.com/details?id=com.dtanquary.blackglassadwtheme Bing: http://market.android.com/details?id=com.microsoft.mobileexperiences.bing BeyondPod Unlock Key: http://market.android.com/details?id=mobi.beyondpod.unlockkey BeyondPod: http://market.android.com/details?id=mobi.beyondpod BeejiveIM: http://market.android.com/details?id=com.beejive.im Beautiful Widgets Animations Addon: http://market.android.com/details?id=com.levelup.bw.forecast Beautiful Widgets: http://market.android.com/details?id=com.levelup.beautifulwidgets Beautiful Live Weather: http://market.android.com/details?id=com.levelup.beautifullive BBC News: http://market.android.com/details?id=net.jimblackler.newswidget Barnacle Wifi Tether: http://market.android.com/details?id=net.szym.barnacle Barcode Scanner: http://market.android.com/details?id=com.google.zxing.client.android ASTRO SMB Module: http://market.android.com/details?id=com.metago.astro.smb ASTRO Pro: http://market.android.com/details?id=com.metago.astro.pro ASTRO Bluetooth Module: http://market.android.com/details?id=com.metago.astro.network.bluetooth ASTRO: http://market.android.com/details?id=com.metago.astro AppBrain App Market: http://market.android.com/details?id=com.appspot.swisscodemonkeys.apps App Drawer Icon Pack: http://market.android.com/details?id=com.adwtheme.appdrawericonpack androidVNC: http://market.android.com/details?id=android.androidVNC AndroidGuys: http://market.android.com/details?id=com.handmark.mpp.AndroidGuys Android System Info: http://market.android.com/details?id=com.electricsheep.asi AndFTP: http://market.android.com/details?id=lysesoft.andftp ADWTheme Red: http://market.android.com/details?id=adw.theme.red ADWLauncher EX: http://market.android.com/details?id=org.adwfreak.launcher ADW.Theme.One: http://market.android.com/details?id=org.adw.theme.one ADW.Faded theme: http://market.android.com/details?id=com.xrcore.adwtheme.faded ADW Gingerbread: http://market.android.com/details?id=me.robertburns.android.adwtheme.gingerbread Advanced Task Killer Free: http://market.android.com/details?id=com.rechild.advancedtaskkiller Adobe Reader: http://market.android.com/details?id=com.adobe.reader Adobe Flash Player 10.1: http://market.android.com/details?id=com.adobe.flashplayer Adobe AIR: http://market.android.com/details?id=com.adobe.air 3G Auto OnOff: http://market.android.com/details?id=com.yuantuo --- Generated by ShareMyApps http://market.android.com/details?id=com.mattlary.shareMyApps Sent from my Droid

    Read the article

  • Sending Messages to SignalR Hubs from the Outside

    - by Ricardo Peres
    Introduction You are by now probably familiarized with SignalR, Microsoft’s API for real-time web functionality. This is, in my opinion, one of the greatest products Microsoft has released in recent time. Usually, people login to a site and enter some page which is connected to a SignalR hub. Then they can send and receive messages – not just text messages, mind you – to other users in the same hub. Also, the server can also take the initiative to send messages to all or a specified subset of users on its own, this is known as server push. The normal flow is pretty straightforward, Microsoft has done a great job with the API, it’s clean and quite simple to use. And for the latter – the server taking the initiative – it’s also quite simple, just involves a little more work. The Problem The API for sending messages can be achieved from inside a hub – an instance of the Hub class – which is something that we don’t have if we are the server and we want to send a message to some user or group of users: the Hub instance is only instantiated in response to a client message. The Solution It is possible to acquire a hub’s context from outside of an actual Hub instance, by calling GlobalHost.ConnectionManager.GetHubContext<T>(). This API allows us to: Broadcast messages to all connected clients (possibly excluding some); Send messages to a specific client; Send messages to a group of clients. So, we have groups and clients, each is identified by a string. Client strings are called connection ids and group names are free-form, given by us. The problem with client strings is, we do not know how these map to actual users. One way to achieve this mapping is by overriding the Hub’s OnConnected and OnDisconnected methods and managing the association there. Here’s an example: 1: public class MyHub : Hub 2: { 3: private static readonly IDictionary<String, ISet<String>> users = new ConcurrentDictionary<String, ISet<String>>(); 4:  5: public static IEnumerable<String> GetUserConnections(String username) 6: { 7: ISet<String> connections; 8:  9: users.TryGetValue(username, out connections); 10:  11: return (connections ?? Enumerable.Empty<String>()); 12: } 13:  14: private static void AddUser(String username, String connectionId) 15: { 16: ISet<String> connections; 17:  18: if (users.TryGetValue(username, out connections) == false) 19: { 20: connections = users[username] = new HashSet<String>(); 21: } 22:  23: connections.Add(connectionId); 24: } 25:  26: private static void RemoveUser(String username, String connectionId) 27: { 28: users[username].Remove(connectionId); 29: } 30:  31: public override Task OnConnected() 32: { 33: AddUser(this.Context.Request.User.Identity.Name, this.Context.ConnectionId); 34: return (base.OnConnected()); 35: } 36:  37: public override Task OnDisconnected() 38: { 39: RemoveUser(this.Context.Request.User.Identity.Name, this.Context.ConnectionId); 40: return (base.OnDisconnected()); 41: } 42: } As you can see, I am using a static field to store the mapping between a user and its possibly many connections – for example, multiple open browser tabs or even multiple browsers accessing the same page with the same login credentials. The user identity, as is normal in .NET, is obtained from the IPrincipal which in SignalR hubs case is stored in Context.Request.User. Of course, this property will only have a meaningful value if we enforce authentication. Another way to go is by creating a group for each user that connects: 1: public class MyHub : Hub 2: { 3: public override Task OnConnected() 4: { 5: this.Groups.Add(this.Context.ConnectionId, this.Context.Request.User.Identity.Name); 6: return (base.OnConnected()); 7: } 8:  9: public override Task OnDisconnected() 10: { 11: this.Groups.Remove(this.Context.ConnectionId, this.Context.Request.User.Identity.Name); 12: return (base.OnDisconnected()); 13: } 14: } In this case, we will have a one-to-one equivalence between users and groups. All connections belonging to the same user will fall in the same group. So, if we want to send messages to a user from outside an instance of the Hub class, we can do something like this, for the first option – user mappings stored in a static field: 1: public void SendUserMessage(String username, String message) 2: { 3: var context = GlobalHost.ConnectionManager.GetHubContext<MyHub>(); 4: 5: foreach (String connectionId in HelloHub.GetUserConnections(username)) 6: { 7: context.Clients.Client(connectionId).sendUserMessage(message); 8: } 9: } And for using groups, its even simpler: 1: public void SendUserMessage(String username, String message) 2: { 3: var context = GlobalHost.ConnectionManager.GetHubContext<MyHub>(); 4:  5: context.Clients.Group(username).sendUserMessage(message); 6: } Using groups has the advantage that the IHubContext interface returned from GetHubContext has direct support for groups, no need to send messages to individual connections. Of course, you can wrap both mapping options in a common API, perhaps exposed through IoC. One example of its interface might be: 1: public interface IUserToConnectionMappingService 2: { 3: //associate and dissociate connections to users 4:  5: void AddUserConnection(String username, String connectionId); 6:  7: void RemoveUserConnection(String username, String connectionId); 8: } SignalR has built-in dependency resolution, by means of the static GlobalHost.DependencyResolver property: 1: //for using groups (in the Global class) 2: GlobalHost.DependencyResolver.Register(typeof(IUserToConnectionMappingService), () => new GroupsMappingService()); 3:  4: //for using a static field (in the Global class) 5: GlobalHost.DependencyResolver.Register(typeof(IUserToConnectionMappingService), () => new StaticMappingService()); 6:  7: //retrieving the current service (in the Hub class) 8: var mapping = GlobalHost.DependencyResolver.Resolve<IUserToConnectionMappingService>(); Now all you have to do is implement GroupsMappingService and StaticMappingService with the code I shown here and change SendUserMessage method to rely in the dependency resolver for the actual implementation. Stay tuned for more SignalR posts!

    Read the article

  • How to store generated eigen faces for future face recognition?

    - by user3237134
    My code works in the following manner: 1.First, it obtains several images from the training set 2.After loading these images, we find the normalized faces,mean face and perform several calculation. 3.Next, we ask for the name of an image we want to recognize 4.We then project the input image into the eigenspace, and based on the difference from the eigenfaces we make a decision. 5.Depending on eigen weight vector for each input image we make clusters using kmeans command. Source code i tried: clear all close all clc % number of images on your training set. M=1200; %Chosen std and mean. %It can be any number that it is close to the std and mean of most of the images. um=60; ustd=32; %read and show images(bmp); S=[]; %img matrix for i=1:M str=strcat(int2str(i),'.jpg'); %concatenates two strings that form the name of the image eval('img=imread(str);'); [irow icol d]=size(img); % get the number of rows (N1) and columns (N2) temp=reshape(permute(img,[2,1,3]),[irow*icol,d]); %creates a (N1*N2)x1 matrix S=[S temp]; %X is a N1*N2xM matrix after finishing the sequence %this is our S end %Here we change the mean and std of all images. We normalize all images. %This is done to reduce the error due to lighting conditions. for i=1:size(S,2) temp=double(S(:,i)); m=mean(temp); st=std(temp); S(:,i)=(temp-m)*ustd/st+um; end %show normalized images for i=1:M str=strcat(int2str(i),'.jpg'); img=reshape(S(:,i),icol,irow); img=img'; end %mean image; m=mean(S,2); %obtains the mean of each row instead of each column tmimg=uint8(m); %converts to unsigned 8-bit integer. Values range from 0 to 255 img=reshape(tmimg,icol,irow); %takes the N1*N2x1 vector and creates a N2xN1 matrix img=img'; %creates a N1xN2 matrix by transposing the image. % Change image for manipulation dbx=[]; % A matrix for i=1:M temp=double(S(:,i)); dbx=[dbx temp]; end %Covariance matrix C=A'A, L=AA' A=dbx'; L=A*A'; % vv are the eigenvector for L % dd are the eigenvalue for both L=dbx'*dbx and C=dbx*dbx'; [vv dd]=eig(L); % Sort and eliminate those whose eigenvalue is zero v=[]; d=[]; for i=1:size(vv,2) if(dd(i,i)>1e-4) v=[v vv(:,i)]; d=[d dd(i,i)]; end end %sort, will return an ascending sequence [B index]=sort(d); ind=zeros(size(index)); dtemp=zeros(size(index)); vtemp=zeros(size(v)); len=length(index); for i=1:len dtemp(i)=B(len+1-i); ind(i)=len+1-index(i); vtemp(:,ind(i))=v(:,i); end d=dtemp; v=vtemp; %Normalization of eigenvectors for i=1:size(v,2) %access each column kk=v(:,i); temp=sqrt(sum(kk.^2)); v(:,i)=v(:,i)./temp; end %Eigenvectors of C matrix u=[]; for i=1:size(v,2) temp=sqrt(d(i)); u=[u (dbx*v(:,i))./temp]; end %Normalization of eigenvectors for i=1:size(u,2) kk=u(:,i); temp=sqrt(sum(kk.^2)); u(:,i)=u(:,i)./temp; end % show eigenfaces; for i=1:size(u,2) img=reshape(u(:,i),icol,irow); img=img'; img=histeq(img,255); end % Find the weight of each face in the training set. omega = []; for h=1:size(dbx,2) WW=[]; for i=1:size(u,2) t = u(:,i)'; WeightOfImage = dot(t,dbx(:,h)'); WW = [WW; WeightOfImage]; end omega = [omega WW]; end % Acquire new image % Note: the input image must have a bmp or jpg extension. % It should have the same size as the ones in your training set. % It should be placed on your desktop ed_min=[]; srcFiles = dir('G:\newdatabase\*.jpg'); % the folder in which ur images exists for b = 1 : length(srcFiles) filename = strcat('G:\newdatabase\',srcFiles(b).name); Imgdata = imread(filename); InputImage=Imgdata; InImage=reshape(permute((double(InputImage)),[2,1,3]),[irow*icol,1]); temp=InImage; me=mean(temp); st=std(temp); temp=(temp-me)*ustd/st+um; NormImage = temp; Difference = temp-m; p = []; aa=size(u,2); for i = 1:aa pare = dot(NormImage,u(:,i)); p = [p; pare]; end InImWeight = []; for i=1:size(u,2) t = u(:,i)'; WeightOfInputImage = dot(t,Difference'); InImWeight = [InImWeight; WeightOfInputImage]; end noe=numel(InImWeight); % Find Euclidean distance e=[]; for i=1:size(omega,2) q = omega(:,i); DiffWeight = InImWeight-q; mag = norm(DiffWeight); e = [e mag]; end ed_min=[ed_min MinimumValue]; theta=6.0e+03; %disp(e) z(b,:)=InImWeight; end IDX = kmeans(z,5); clustercount=accumarray(IDX, ones(size(IDX))); disp(clustercount); QUESTIONS: 1.It is working fine for M=50(i.e Training set contains 50 images) but not for M=1200(i.e Training set contains 1200 images).It is not showing any error.There is no output.I waited for 10 min still there is no output. I think it is going infinite loop.What is the problem?Where i was wrong? 2.Instead of running the training set everytime how eigen faces generated are stored so that stored eigen faces are used for future face recoginition for a new input image.So it reduces wastage of time.

    Read the article

  • Vectorization of matlab code for faster execution

    - by user3237134
    My code works in the following manner: 1.First, it obtains several images from the training set 2.After loading these images, we find the normalized faces,mean face and perform several calculation. 3.Next, we ask for the name of an image we want to recognize 4.We then project the input image into the eigenspace, and based on the difference from the eigenfaces we make a decision. 5.Depending on eigen weight vector for each input image we make clusters using kmeans command. Source code i tried: clear all close all clc % number of images on your training set. M=1200; %Chosen std and mean. %It can be any number that it is close to the std and mean of most of the images. um=60; ustd=32; %read and show images(bmp); S=[]; %img matrix for i=1:M str=strcat(int2str(i),'.jpg'); %concatenates two strings that form the name of the image eval('img=imread(str);'); [irow icol d]=size(img); % get the number of rows (N1) and columns (N2) temp=reshape(permute(img,[2,1,3]),[irow*icol,d]); %creates a (N1*N2)x1 matrix S=[S temp]; %X is a N1*N2xM matrix after finishing the sequence %this is our S end %Here we change the mean and std of all images. We normalize all images. %This is done to reduce the error due to lighting conditions. for i=1:size(S,2) temp=double(S(:,i)); m=mean(temp); st=std(temp); S(:,i)=(temp-m)*ustd/st+um; end %show normalized images for i=1:M str=strcat(int2str(i),'.jpg'); img=reshape(S(:,i),icol,irow); img=img'; end %mean image; m=mean(S,2); %obtains the mean of each row instead of each column tmimg=uint8(m); %converts to unsigned 8-bit integer. Values range from 0 to 255 img=reshape(tmimg,icol,irow); %takes the N1*N2x1 vector and creates a N2xN1 matrix img=img'; %creates a N1xN2 matrix by transposing the image. % Change image for manipulation dbx=[]; % A matrix for i=1:M temp=double(S(:,i)); dbx=[dbx temp]; end %Covariance matrix C=A'A, L=AA' A=dbx'; L=A*A'; % vv are the eigenvector for L % dd are the eigenvalue for both L=dbx'*dbx and C=dbx*dbx'; [vv dd]=eig(L); % Sort and eliminate those whose eigenvalue is zero v=[]; d=[]; for i=1:size(vv,2) if(dd(i,i)>1e-4) v=[v vv(:,i)]; d=[d dd(i,i)]; end end %sort, will return an ascending sequence [B index]=sort(d); ind=zeros(size(index)); dtemp=zeros(size(index)); vtemp=zeros(size(v)); len=length(index); for i=1:len dtemp(i)=B(len+1-i); ind(i)=len+1-index(i); vtemp(:,ind(i))=v(:,i); end d=dtemp; v=vtemp; %Normalization of eigenvectors for i=1:size(v,2) %access each column kk=v(:,i); temp=sqrt(sum(kk.^2)); v(:,i)=v(:,i)./temp; end %Eigenvectors of C matrix u=[]; for i=1:size(v,2) temp=sqrt(d(i)); u=[u (dbx*v(:,i))./temp]; end %Normalization of eigenvectors for i=1:size(u,2) kk=u(:,i); temp=sqrt(sum(kk.^2)); u(:,i)=u(:,i)./temp; end % show eigenfaces; for i=1:size(u,2) img=reshape(u(:,i),icol,irow); img=img'; img=histeq(img,255); end % Find the weight of each face in the training set. omega = []; for h=1:size(dbx,2) WW=[]; for i=1:size(u,2) t = u(:,i)'; WeightOfImage = dot(t,dbx(:,h)'); WW = [WW; WeightOfImage]; end omega = [omega WW]; end % Acquire new image % Note: the input image must have a bmp or jpg extension. % It should have the same size as the ones in your training set. % It should be placed on your desktop ed_min=[]; srcFiles = dir('G:\newdatabase\*.jpg'); % the folder in which ur images exists for b = 1 : length(srcFiles) filename = strcat('G:\newdatabase\',srcFiles(b).name); Imgdata = imread(filename); InputImage=Imgdata; InImage=reshape(permute((double(InputImage)),[2,1,3]),[irow*icol,1]); temp=InImage; me=mean(temp); st=std(temp); temp=(temp-me)*ustd/st+um; NormImage = temp; Difference = temp-m; p = []; aa=size(u,2); for i = 1:aa pare = dot(NormImage,u(:,i)); p = [p; pare]; end InImWeight = []; for i=1:size(u,2) t = u(:,i)'; WeightOfInputImage = dot(t,Difference'); InImWeight = [InImWeight; WeightOfInputImage]; end noe=numel(InImWeight); % Find Euclidean distance e=[]; for i=1:size(omega,2) q = omega(:,i); DiffWeight = InImWeight-q; mag = norm(DiffWeight); e = [e mag]; end ed_min=[ed_min MinimumValue]; theta=6.0e+03; %disp(e) z(b,:)=InImWeight; end IDX = kmeans(z,5); clustercount=accumarray(IDX, ones(size(IDX))); disp(clustercount); Running time for 50 images:Elapsed time is 103.947573 seconds. QUESTIONS: 1.It is working fine for M=50(i.e Training set contains 50 images) but not for M=1200(i.e Training set contains 1200 images).It is not showing any error.There is no output.I waited for 10 min still there is no output. I think it is going infinite loop.What is the problem?Where i was wrong?

    Read the article

  • Augmenting your Social Efforts via Data as a Service (DaaS)

    - by Mike Stiles
    The following is the 3rd in a series of posts on the value of leveraging social data across your enterprise by Oracle VP Product Development Don Springer and Oracle Cloud Data and Insight Service Sr. Director Product Management Niraj Deo. In this post, we will discuss the approach and value of integrating additional “public” data via a cloud-based Data-as-as-Service platform (or DaaS) to augment your Socially Enabled Big Data Analytics and CX Management. Let’s assume you have a functional Social-CRM platform in place. You are now successfully and continuously listening and learning from your customers and key constituents in Social Media, you are identifying relevant posts and following up with direct engagement where warranted (both 1:1, 1:community, 1:all), and you are starting to integrate signals for communication into your appropriate Customer Experience (CX) Management systems as well as insights for analysis in your business intelligence application. What is the next step? Augmenting Social Data with other Public Data for More Advanced Analytics When we say advanced analytics, we are talking about understanding causality and correlation from a wide variety, volume and velocity of data to Key Performance Indicators (KPI) to achieve and optimize business value. And in some cases, to predict future performance to make appropriate course corrections and change the outcome to your advantage while you can. The data to acquire, process and analyze this is very nuanced: It can vary across structured, semi-structured, and unstructured data It can span across content, profile, and communities of profiles data It is increasingly public, curated and user generated The key is not just getting the data, but making it value-added data and using it to help discover the insights to connect to and improve your KPIs. As we spend time working with our larger customers on advanced analytics, we have seen a need arise for more business applications to have the ability to ingest and use “quality” curated, social, transactional reference data and corresponding insights. The challenge for the enterprise has been getting this data inline into an easily accessible system and providing the contextual integration of the underlying data enriched with insights to be exported into the enterprise’s business applications. The following diagram shows the requirements for this next generation data and insights service or (DaaS): Some quick points on these requirements: Public Data, which in this context is about Common Business Entities, such as - Customers, Suppliers, Partners, Competitors (all are organizations) Contacts, Consumers, Employees (all are people) Products, Brands This data can be broadly categorized incrementally as - Base Utility data (address, industry classification) Public Master Reference data (trade style, hierarchy) Social/Web data (News, Feeds, Graph) Transactional Data generated by enterprise process, workflows etc. This Data has traits of high-volume, variety, velocity etc., and the technology needed to efficiently integrate this data for your needs includes - Change management of Public Reference Data across all categories Applied Big Data to extract statics as well as real-time insights Knowledge Diagnostics and Data Mining As you consider how to deploy this solution, many of our customers will be using an online “cloud” service that provides quality data and insights uniformly to all their necessary applications. In addition, they are requesting a service that is: Agile and Easy to Use: Applications integrated with the service can obtain data on-demand, quickly and simply Cost-effective: Pre-integrated into applications so customers don’t have to Has High Data Quality: Single point access to reference data for data quality and linkages to transactional, curated and social data Supports Data Governance: Becomes more manageable and cost-effective since control of data privacy and compliance can be enforced in a centralized place Data-as-a-Service (DaaS) Just as the cloud has transformed and now offers a better path for how an enterprise manages its IT from their infrastructure, platform, and software (IaaS, PaaS, and SaaS), the next step is data (DaaS). Over the last 3 years, we have seen the market begin to offer a cloud-based data service and gain initial traction. On one side of the DaaS continuum, we see an “appliance” type of service that provides a single, reliable source of accurate business data plus social information about accounts, leads, contacts, etc. On the other side of the continuum we see more of an online market “exchange” approach where ISVs and Data Publishers can publish and sell premium datasets within the exchange, with the exchange providing a rich set of web interfaces to improve the ease of data integration. Why the difference? It depends on the provider’s philosophy on how fast the rate of commoditization of certain data types will occur. How do you decide the best approach? Our perspective, as shown in the diagram below, is that the enterprise should develop an elastic schema to support multi-domain applicability. This allows the enterprise to take the most flexible approach to harness the speed and breadth of public data to achieve value. The key tenet of the proposed approach is that an enterprise carefully federates common utility, master reference data end points, mobility considerations and content processing, so that they are pervasively available. One way you may already be familiar with this approach is in how you do Address Verification treatments for accounts, contacts etc. If you design and revise this service in such a way that it is also easily available to social analytic needs, you could extend this to launch geo-location based social use cases (marketing, sales etc.). Our fundamental belief is that value-added data achieved through enrichment with specialized algorithms, as well as applying business “know-how” to weight-factor KPIs based on innovative combinations across an ever-increasing variety, volume and velocity of data, will be where real value is achieved. Essentially, Data-as-a-Service becomes a single entry point for the ever-increasing richness and volume of public data, with enrichment and combined capabilities to extract and integrate the right data from the right sources with the right factoring at the right time for faster decision-making and action within your core business applications. As more data becomes available (and in many cases commoditized), this value-added data processing approach will provide you with ongoing competitive advantage. Let’s look at a quick example of creating a master reference relationship that could be used as an input for a variety of your already existing business applications. In phase 1, a simple master relationship is achieved between a company (e.g. General Motors) and a variety of car brands’ social insights. The reference data allows for easy sort, export and integration into a set of CRM use cases for analytics, sales and marketing CRM. In phase 2, as you create more data relationships (e.g. competitors, contacts, other brands) to have broader and deeper references (social profiles, social meta-data) for more use cases across CRM, HCM, SRM, etc. This is just the tip of the iceberg, as the amount of master reference relationships is constrained only by your imagination and the availability of quality curated data you have to work with. DaaS is just now emerging onto the marketplace as the next step in cloud transformation. For some of you, this may be the first you have heard about it. Let us know if you have questions, or perspectives. In the meantime, we will continue to share insights as we can.Photo: Erik Araujo, stock.xchng

    Read the article

  • Online ALTER TABLE in MySQL 5.6

    - by Marko Mäkelä
    This is the low-level view of data dictionary language (DDL) operations in the InnoDB storage engine in MySQL 5.6. John Russell gave a more high-level view in his blog post April 2012 Labs Release – Online DDL Improvements. MySQL before the InnoDB Plugin Traditionally, the MySQL storage engine interface has taken a minimalistic approach to data definition language. The only natively supported operations were CREATE TABLE, DROP TABLE and RENAME TABLE. Consider the following example: CREATE TABLE t(a INT); INSERT INTO t VALUES (1),(2),(3); CREATE INDEX a ON t(a); DROP TABLE t; The CREATE INDEX statement would be executed roughly as follows: CREATE TABLE temp(a INT, INDEX(a)); INSERT INTO temp SELECT * FROM t; RENAME TABLE t TO temp2; RENAME TABLE temp TO t; DROP TABLE temp2; You could imagine that the database could crash when copying all rows from the original table to the new one. For example, it could run out of file space. Then, on restart, InnoDB would roll back the huge INSERT transaction. To fix things a little, a hack was added to ha_innobase::write_row for committing the transaction every 10,000 rows. Still, it was frustrating that even a simple DROP INDEX would make the table unavailable for modifications for a long time. Fast Index Creation in the InnoDB Plugin of MySQL 5.1 MySQL 5.1 introduced a new interface for CREATE INDEX and DROP INDEX. The old table-copying approach can still be forced by SET old_alter_table=0. This interface is used in MySQL 5.5 and in the InnoDB Plugin for MySQL 5.1. Apart from the ability to do a quick DROP INDEX, the main advantage is that InnoDB will execute a merge-sort algorithm before inserting the index records into each index that is being created. This should speed up the insert into the secondary index B-trees and potentially result in a better B-tree fill factor. The 5.1 ALTER TABLE interface was not perfect. For example, DROP FOREIGN KEY still invoked the table copy. Renaming columns could conflict with InnoDB foreign key constraints. Combining ADD KEY and DROP KEY in ALTER TABLE was problematic and not atomic inside the storage engine. The ALTER TABLE interface in MySQL 5.6 The ALTER TABLE storage engine interface was completely rewritten in MySQL 5.6. Instead of introducing a method call for every conceivable operation, MySQL 5.6 introduced a handful of methods, and data structures that keep track of the requested changes. In MySQL 5.6, online ALTER TABLE operation can be requested by specifying LOCK=NONE. Also LOCK=SHARED and LOCK=EXCLUSIVE are available. The old-style table copying can be requested by ALGORITHM=COPY. That one will require at least LOCK=SHARED. From the InnoDB point of view, anything that is possible with LOCK=EXCLUSIVE is also possible with LOCK=SHARED. Most ALGORITHM=INPLACE operations inside InnoDB can be executed online (LOCK=NONE). InnoDB will always require an exclusive table lock in two phases of the operation. The execution phases are tied to a number of methods: handler::check_if_supported_inplace_alter Checks if the storage engine can perform all requested operations, and if so, what kind of locking is needed. handler::prepare_inplace_alter_table InnoDB uses this method to set up the data dictionary cache for upcoming CREATE INDEX operation. We need stubs for the new indexes, so that we can keep track of changes to the table during online index creation. Also, crash recovery would drop any indexes that were incomplete at the time of the crash. handler::inplace_alter_table In InnoDB, this method is used for creating secondary indexes or for rebuilding the table. This is the ‘main’ phase that can be executed online (with concurrent writes to the table). handler::commit_inplace_alter_table This is where the operation is committed or rolled back. Here, InnoDB would drop any indexes, rename any columns, drop or add foreign keys, and finalize a table rebuild or index creation. It would also discard any logs that were set up for online index creation or table rebuild. The prepare and commit phases require an exclusive lock, blocking all access to the table. If MySQL times out while upgrading the table meta-data lock for the commit phase, it will roll back the ALTER TABLE operation. In MySQL 5.6, data definition language operations are still not fully atomic, because the data dictionary is split. Part of it is inside InnoDB data dictionary tables. Part of the information is only available in the *.frm file, which is not covered by any crash recovery log. But, there is a single commit phase inside the storage engine. Online Secondary Index Creation It may occur that an index needs to be created on a new column to speed up queries. But, it may be unacceptable to block modifications on the table while creating the index. It turns out that it is conceptually not so hard to support online index creation. All we need is some more execution phases: Set up a stub for the index, for logging changes. Scan the table for index records. Sort the index records. Bulk load the index records. Apply the logged changes. Replace the stub with the actual index. Threads that modify the table will log the operations to the logs of each index that is being created. Errors, such as log overflow or uniqueness violations, will only be flagged by the ALTER TABLE thread. The log is conceptually similar to the InnoDB change buffer. The bulk load of index records will bypass record locking. We still generate redo log for writing the index pages. It would suffice to log page allocations only, and to flush the index pages from the buffer pool to the file system upon completion. Native ALTER TABLE Starting with MySQL 5.6, InnoDB supports most ALTER TABLE operations natively. The notable exceptions are changes to the column type, ADD FOREIGN KEY except when foreign_key_checks=0, and changes to tables that contain FULLTEXT indexes. The keyword ALGORITHM=INPLACE is somewhat misleading, because certain operations cannot be performed in-place. For example, changing the ROW_FORMAT of a table requires a rebuild. Online operation (LOCK=NONE) is not allowed in the following cases: when adding an AUTO_INCREMENT column, when the table contains FULLTEXT indexes or a hidden FTS_DOC_ID column, or when there are FOREIGN KEY constraints referring to the table, with ON…CASCADE or ON…SET NULL option. The FOREIGN KEY limitations are needed, because MySQL does not acquire meta-data locks on the child or parent tables when executing SQL statements. Theoretically, InnoDB could support operations like ADD COLUMN and DROP COLUMN in-place, by lazily converting the table to a newer format. This would require that the data dictionary keep multiple versions of the table definition. For simplicity, we will copy the entire table, even for DROP COLUMN. The bulk copying of the table will bypass record locking and undo logging. For facilitating online operation, a temporary log will be associated with the clustered index of table. Threads that modify the table will also write the changes to the log. When altering the table, we skip all records that have been marked for deletion. In this way, we can simply discard any undo log records that were not yet purged from the original table. Off-page columns, or BLOBs, are an important consideration. We suspend the purge of delete-marked records if it would free any off-page columns from the old table. This is because the BLOBs can be needed when applying changes from the log. We have special logging for handling the ROLLBACK of an INSERT that inserted new off-page columns. This is because the columns will be freed at rollback.

    Read the article

  • Introduction to Human Workflow 11g

    - by agiovannetti
    Human Workflow is a component of SOA Suite just like BPEL, Mediator, Business Rules, etc. The Human Workflow component allows you to incorporate human intervention in a business process. You can use Human Workflow to create a business process that requires a manager to approve purchase orders greater than $10,000; or a business process that handles article reviews in which a group of reviewers need to vote/approve an article before it gets published. Human Workflow can handle the task assignment and routing as well as the generation of notifications to the participants. There are three common patterns or usages of Human Workflow: 1) Approval Scenarios: manage documents and other transactional data through approval chains . For example: approve expense report, vacation approval, hiring approval, etc. 2) Reviews by multiple users or groups: group collaboration and review of documents or proposals. For example, processing a sales quote which is subject to review by multiple people. 3) Case Management: workflows around work management or case management. For example, processing a service request. This could be routed to various people who all need to modify the task. It may also incorporate ad hoc routing which is unknown at design time. SOA 11g Human Workflow includes the following features: Assignment and routing of tasks to the correct users or groups. Deadlines, escalations, notifications, and other features required for ensuring the timely performance of a task. Presentation of tasks to end users through a variety of mechanisms, including a Worklist application. Organization, filtering, prioritization and other features required for end users to productively perform their tasks. Reports, reassignments, load balancing and other features required by supervisors and business owners to manage the performance of tasks. Human Workflow Architecture The Human Workflow component is divided into 3 modules: the service interface, the task definition and the client interface module. The Service Interface handles the interaction with BPEL and other components. The Client Interface handles the presentation of task data through clients like the Worklist application, portals and notification channels. The task definition module is in charge of managing the lifecycle of a task. Who should get the task assigned? What should happen next with the task? When must the task be completed? Should the task be escalated?, etc Stages and Participants When you create a Human Task you need to specify how the task is assigned and routed. The first step is to define the stages and participants. A stage is just a logical group. A participant can be a user, a group of users or an application role. The participants indicate the type of assignment and routing that will be performed. Stages can be sequential or in parallel. You can combine them to create any usage you require. See diagram below: Assignment and Routing There are different ways a task can be assigned and routed: Single Approver: task is assigned to a single user, group or role. For example, a vacation request is assigned to a manager. If the manager approves or rejects the request, the employee is notified with the decision. If the task is assigned to a group then once one of managers acts on it, the task is completed. Parallel : task is assigned to a set of people that must work in parallel. This is commonly used for voting. For example, a task gets approved once 50% of the participants approve it. You can also set it up to be a unanimous vote. Serial : participants must work in sequence. The most common scenario for this is management chain escalation. FYI (For Your Information) : task is assigned to participants who can view it, add comments and attachments, but can not modify or complete the task. Task Actions The following is the list of actions that can be performed on a task: Claim : if a task is assigned to a group or multiple users, then the task must be claimed first to be able to act on it. Escalate : if the participant is not able to complete a task, he/she can escalate it. The task is reassigned to his/her manager (up one level in a hierarchy). Pushback : the task is sent back to the previous assignee. Reassign :if the participant is a manager, he/she can delegate a task to his/her reports. Release : if a task is assigned to a group or multiple users, it can be released if the user who claimed the task cannot complete the task. Any of the other assignees can claim and complete the task. Request Information and Submit Information : use when the participant needs to supply more information or to request more information from the task creator or any of the previous assignees. Suspend and Resume :if a task is not relevant, it can be suspended. A suspension is indefinite. It does not expire until Resume is used to resume working on the task. Withdraw : if the creator of a task does not want to continue with it, for example, he wants to cancel a vacation request, he can withdraw the task. The business process determines what happens next. Renew : if a task is about to expire, the participant can renew it. The task expiration date is extended one week. Notifications Human Workflow provides a mechanism for sending notifications to participants to alert them of changes on a task. Notifications can be sent via email, telephone voice message, instant messaging (IM) or short message service (SMS). Notifications can be sent when the task status changes to any of the following: Assigned/renewed/delegated/reassigned/escalated Completed Error Expired Request Info Resume Suspended Added/Updated comments and/or attachments Updated Outcome Withdraw Other Actions (e.g. acquiring a task) Here is an example of an email notification: Worklist Application Oracle BPM Worklist application is the default user interface included in SOA Suite. It allows users to access and act on tasks that have been assigned to them. For example, from the Worklist application, a loan agent can review loan applications or a manager can approve employee vacation requests. Through the Worklist Application users can: Perform authorized actions on tasks, acquire and check out shared tasks, define personal to-do tasks and define subtasks. Filter tasks view based on various criteria. Work with standard work queues, such as high priority tasks, tasks due soon and so on. Work queues allow users to create a custom view to group a subset of tasks in the worklist, for example, high priority tasks, tasks due in 24 hours, expense approval tasks and more. Define custom work queues. Gain proxy access to part of another user's tasks. Define custom vacation rules and delegation rules. Enable group owners to define task dispatching rules for shared tasks. Collect a complete workflow history and audit trail. Use digital signatures for tasks. Run reports like Unattended tasks, Tasks productivity, etc. Here is a screenshoot of what the Worklist Application looks like. On the right hand side you can see the tasks that have been assigned to the user and the task's detail. References Introduction to SOA Suite 11g Human Workflow Webcast Note 1452937.2 Human Workflow Information Center Using the Human Workflow Service Component 11.1.1.6 Human Workflow Samples Human Workflow APIs Java Docs

    Read the article

  • PowerShell Script to Deploy Multiple VM on Azure in Parallel #azure #powershell

    - by Marco Russo (SQLBI)
    This blog is usually dedicated to Business Intelligence and SQL Server, but I didn’t found easily on the web simple PowerShell scripts to help me deploying a number of virtual machines on Azure that I use for testing and development. Since I need to deploy, start, stop and remove many virtual machines created from a common image I created (you know, Tabular is not part of the standard images provided by Microsoft…), I wanted to minimize the time required to execute every operation from my Windows Azure PowerShell console (but I suggest you using Windows PowerShell ISE), so I also wanted to fire the commands as soon as possible in parallel, without losing the result in the console. In order to execute multiple commands in parallel, I used the Start-Job cmdlet, and using Get-Job and Receive-Job I wait for job completion and display the messages generated during background command execution. This technique allows me to reduce execution time when I have to deploy, start, stop or remove virtual machines. Please note that a few operations on Azure acquire an exclusive lock and cannot be really executed in parallel, but only one part of their execution time is subject to this lock. Thus, you obtain a better response time also in these scenarios (this is the case of the provisioning of a new VM). Finally, when you remove the VMs you still have the disk containing the virtual machine to remove. This cannot be done just after the VM removal, because you have to wait that the removal operation is completed on Azure. So I wrote a script that you have to run a few minutes after VMs removal and delete disks (and VHD) no longer related to a VM. I just check that the disk were associated to the original image name used to provision the VMs (so I don’t remove other disks deployed by other batches that I might want to preserve). These examples are specific for my scenario, if you need more complex configurations you have to change and adapt the code. But if your need is to create multiple instances of the same VM running in a workgroup, these scripts should be good enough. I prepared the following PowerShell scripts: ProvisionVMs: Provision many VMs in parallel starting from the same image. It creates one service for each VM. RemoveVMs: Remove all the VMs in parallel – it also remove the service created for the VM StartVMs: Starts all the VMs in parallel StopVMs: Stops all the VMs in parallel RemoveOrphanDisks: Remove all the disks no longer used by any VMs. Run this script a few minutes after RemoveVMs script. ProvisionVMs # Name of subscription $SubscriptionName = "Copy the SubscriptionName property you get from Get-AzureSubscription"   # Name of storage account (where VMs will be deployed) $StorageAccount = "Copy the Label property you get from Get-AzureStorageAccount"   function ProvisionVM( [string]$VmName ) {     Start-Job -ArgumentList $VmName {         param($VmName) $Location = "Copy the Location property you get from Get-AzureStorageAccount" $InstanceSize = "A5" # You can use any other instance, such as Large, A6, and so on $AdminUsername = "UserName" # Write the name of the administrator account in the new VM $Password = "Password"      # Write the password of the administrator account in the new VM $Image = "Copy the ImageName property you get from Get-AzureVMImage" # You can list your own images using the following command: # Get-AzureVMImage | Where-Object {$_.PublisherName -eq "User" }         New-AzureVMConfig -Name $VmName -ImageName $Image -InstanceSize $InstanceSize |             Add-AzureProvisioningConfig -Windows -Password $Password -AdminUsername $AdminUsername|             New-AzureVM -Location $Location -ServiceName "$VmName" -Verbose     } }   # Set the proper storage - you might remove this line if you have only one storage in the subscription Set-AzureSubscription -SubscriptionName $SubscriptionName -CurrentStorageAccount $StorageAccount   # Select the subscription - this line is fundamental if you have access to multiple subscription # You might remove this line if you have only one subscription Select-AzureSubscription -SubscriptionName $SubscriptionName   # Every line in the following list provisions one VM using the name specified in the argument # You can change the number of lines - use a unique name for every VM - don't reuse names # already used in other VMs already deployed ProvisionVM "test10" ProvisionVM "test11" ProvisionVM "test12" ProvisionVM "test13" ProvisionVM "test14" ProvisionVM "test15" ProvisionVM "test16" ProvisionVM "test17" ProvisionVM "test18" ProvisionVM "test19" ProvisionVM "test20"   # Wait for all to complete While (Get-Job -State "Running") {     Get-Job -State "Completed" | Receive-Job     Start-Sleep 1 }   # Display output from all jobs Get-Job | Receive-Job   # Cleanup of jobs Remove-Job *   # Displays batch completed echo "Provisioning VM Completed" RemoveVMs # Name of subscription $SubscriptionName = "Copy the SubscriptionName property you get from Get-AzureSubscription"   function RemoveVM( [string]$VmName ) {     Start-Job -ArgumentList $VmName {         param($VmName)         Remove-AzureService -ServiceName $VmName -Force -Verbose     } }   # Select the subscription - this line is fundamental if you have access to multiple subscription # You might remove this line if you have only one subscription Select-AzureSubscription -SubscriptionName $SubscriptionName   # Every line in the following list remove one VM using the name specified in the argument # You can change the number of lines - use a unique name for every VM - don't reuse names # already used in other VMs already deployed RemoveVM "test10" RemoveVM "test11" RemoveVM "test12" RemoveVM "test13" RemoveVM "test14" RemoveVM "test15" RemoveVM "test16" RemoveVM "test17" RemoveVM "test18" RemoveVM "test19" RemoveVM "test20"   # Wait for all to complete While (Get-Job -State "Running") {     Get-Job -State "Completed" | Receive-Job     Start-Sleep 1 }   # Display output from all jobs Get-Job | Receive-Job   # Cleanup Remove-Job *   # Displays batch completed echo "Remove VM Completed" StartVMs # Name of subscription $SubscriptionName = "Copy the SubscriptionName property you get from Get-AzureSubscription"   function StartVM( [string]$VmName ) {     Start-Job -ArgumentList $VmName {         param($VmName)         Start-AzureVM -Name $VmName -ServiceName $VmName -Verbose     } }   # Select the subscription - this line is fundamental if you have access to multiple subscription # You might remove this line if you have only one subscription Select-AzureSubscription -SubscriptionName $SubscriptionName   # Every line in the following list starts one VM using the name specified in the argument # You can change the number of lines - use a unique name for every VM - don't reuse names # already used in other VMs already deployed StartVM "test10" StartVM "test11" StartVM "test11" StartVM "test12" StartVM "test13" StartVM "test14" StartVM "test15" StartVM "test16" StartVM "test17" StartVM "test18" StartVM "test19" StartVM "test20"   # Wait for all to complete While (Get-Job -State "Running") {     Get-Job -State "Completed" | Receive-Job     Start-Sleep 1 }   # Display output from all jobs Get-Job | Receive-Job   # Cleanup Remove-Job *   # Displays batch completed echo "Start VM Completed"   StopVMs # Name of subscription $SubscriptionName = "Copy the SubscriptionName property you get from Get-AzureSubscription"   function StopVM( [string]$VmName ) {     Start-Job -ArgumentList $VmName {         param($VmName)         Stop-AzureVM -Name $VmName -ServiceName $VmName -Verbose -Force     } }   # Select the subscription - this line is fundamental if you have access to multiple subscription # You might remove this line if you have only one subscription Select-AzureSubscription -SubscriptionName $SubscriptionName   # Every line in the following list stops one VM using the name specified in the argument # You can change the number of lines - use a unique name for every VM - don't reuse names # already used in other VMs already deployed StopVM "test10" StopVM "test11" StopVM "test12" StopVM "test13" StopVM "test14" StopVM "test15" StopVM "test16" StopVM "test17" StopVM "test18" StopVM "test19" StopVM "test20"   # Wait for all to complete While (Get-Job -State "Running") {     Get-Job -State "Completed" | Receive-Job     Start-Sleep 1 }   # Display output from all jobs Get-Job | Receive-Job   # Cleanup Remove-Job *   # Displays batch completed echo "Stop VM Completed" RemoveOrphanDisks $Image = "Copy the ImageName property you get from Get-AzureVMImage" # You can list your own images using the following command: # Get-AzureVMImage | Where-Object {$_.PublisherName -eq "User" }   # Remove all orphan disks coming from the image specified in $ImageName Get-AzureDisk |     Where-Object {$_.attachedto -eq $null -and $_.SourceImageName -eq $ImageName} |     Remove-AzureDisk -DeleteVHD -Verbose  

    Read the article

  • SQL SERVER – Concurrency Basics – Guest Post by Vinod Kumar

    - by pinaldave
    This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions from SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. Learning is always fun when it comes to SQL Server and learning the basics again can be more fun. I did write about Transaction Logs and recovery over my blogs and the concept of simplifying the basics is a challenge. In the real world we always see checks and queues for a process – say railway reservation, banks, customer supports etc there is a process of line and queue to facilitate everyone. Shorter the queue higher is the efficiency of system (a.k.a higher is the concurrency). Every database does implement this using checks like locking, blocking mechanisms and they implement the standards in a way to facilitate higher concurrency. In this post, let us talk about the topic of Concurrency and what are the various aspects that one needs to know about concurrency inside SQL Server. Let us learn the concepts as one-liners: Concurrency can be defined as the ability of multiple processes to access or change shared data at the same time. The greater the number of concurrent user processes that can be active without interfering with each other, the greater the concurrency of the database system. Concurrency is reduced when a process that is changing data prevents other processes from reading that data or when a process that is reading data prevents other processes from changing that data. Concurrency is also affected when multiple processes are attempting to change the same data simultaneously. Two approaches to managing concurrent data access: Optimistic Concurrency Model Pessimistic Concurrency Model Concurrency Models Pessimistic Concurrency Default behavior: acquire locks to block access to data that another process is using. Assumes that enough data modification operations are in the system that any given read operation is likely affected by a data modification made by another user (assumes conflicts will occur). Avoids conflicts by acquiring a lock on data being read so no other processes can modify that data. Also acquires locks on data being modified so no other processes can access the data for either reading or modifying. Readers block writer, writers block readers and writers. Optimistic Concurrency Assumes that there are sufficiently few conflicting data modification operations in the system that any single transaction is unlikely to modify data that another transaction is modifying. Default behavior of optimistic concurrency is to use row versioning to allow data readers to see the state of the data before the modification occurs. Older versions of the data are saved so a process reading data can see the data as it was when the process started reading and not affected by any changes being made to that data. Processes modifying the data is unaffected by processes reading the data because the reader is accessing a saved version of the data rows. Readers do not block writers and writers do not block readers, but, writers can and will block writers. Transaction Processing A transaction is the basic unit of work in SQL Server. Transaction consists of SQL commands that read and update the database but the update is not considered final until a COMMIT command is issued (at least for an explicit transaction: marked with a BEGIN TRAN and the end is marked by a COMMIT TRAN or ROLLBACK TRAN). Transactions must exhibit all the ACID properties of a transaction. ACID Properties Transaction processing must guarantee the consistency and recoverability of SQL Server databases. Ensures all transactions are performed as a single unit of work regardless of hardware or system failure. A – Atomicity C – Consistency I – Isolation D- Durability Atomicity: Each transaction is treated as all or nothing – it either commits or aborts. Consistency: ensures that a transaction won’t allow the system to arrive at an incorrect logical state – the data must always be logically correct.  Consistency is honored even in the event of a system failure. Isolation: separates concurrent transactions from the updates of other incomplete transactions. SQL Server accomplishes isolation among transactions by locking data or creating row versions. Durability: After a transaction commits, the durability property ensures that the effects of the transaction persist even if a system failure occurs. If a system failure occurs while a transaction is in progress, the transaction is completely undone, leaving no partial effects on data. Transaction Dependencies In addition to supporting all four ACID properties, a transaction might exhibit few other behaviors (known as dependency problems or consistency problems). Lost Updates: Occur when two processes read the same data and both manipulate the data, changing its value and then both try to update the original data to the new value. The second process might overwrite the first update completely. Dirty Reads: Occurs when a process reads uncommitted data. If one process has changed data but not yet committed the change, another process reading the data will read it in an inconsistent state. Non-repeatable Reads: A read is non-repeatable if a process might get different values when reading the same data in two reads within the same transaction. This can happen when another process changes the data in between the reads that the first process is doing. Phantoms: Occurs when membership in a set changes. It occurs if two SELECT operations using the same predicate in the same transaction return a different number of rows. Isolation Levels SQL Server supports 5 isolation levels that control the behavior of read operations. Read Uncommitted All behaviors except for lost updates are possible. Implemented by allowing the read operations to not take any locks, and because of this, it won’t be blocked by conflicting locks acquired by other processes. The process can read data that another process has modified but not yet committed. When using the read uncommitted isolation level and scanning an entire table, SQL Server can decide to do an allocation order scan (in page-number order) instead of a logical order scan (following page pointers). If another process doing concurrent operations changes data and move rows to a new location in the table, the allocation order scan can end up reading the same row twice. Also can happen if you have read a row before it is updated and then an update moves the row to a higher page number than your scan encounters later. Performing an allocation order scan under Read Uncommitted can cause you to miss a row completely – can happen when a row on a high page number that hasn’t been read yet is updated and moved to a lower page number that has already been read. Read Committed Two varieties of read committed isolation: optimistic and pessimistic (default). Ensures that a read never reads data that another application hasn’t committed. If another transaction is updating data and has exclusive locks on data, your transaction will have to wait for the locks to be released. Your transaction must put share locks on data that are visited, which means that data might be unavailable for others to use. A share lock doesn’t prevent others from reading but prevents them from updating. Read committed (snapshot) ensures that an operation never reads uncommitted data, but not by forcing other processes to wait. SQL Server generates a version of the changed row with its previous committed values. Data being changed is still locked but other processes can see the previous versions of the data as it was before the update operation began. Repeatable Read This is a Pessimistic isolation level. Ensures that if a transaction revisits data or a query is reissued the data doesn’t change. That is, issuing the same query twice within a transaction cannot pickup any changes to data values made by another user’s transaction because no changes can be made by other transactions. However, this does allow phantom rows to appear. Preventing non-repeatable read is a desirable safeguard but cost is that all shared locks in a transaction must be held until the completion of the transaction. Snapshot Snapshot Isolation (SI) is an optimistic isolation level. Allows for processes to read older versions of committed data if the current version is locked. Difference between snapshot and read committed has to do with how old the older versions have to be. It’s possible to have two transactions executing simultaneously that give us a result that is not possible in any serial execution. Serializable This is the strongest of the pessimistic isolation level. Adds to repeatable read isolation level by ensuring that if a query is reissued rows were not added in the interim, i.e, phantoms do not appear. Preventing phantoms is another desirable safeguard, but cost of this extra safeguard is similar to that of repeatable read – all shared locks in a transaction must be held until the transaction completes. In addition serializable isolation level requires that you lock data that has been read but also data that doesn’t exist. Ex: if a SELECT returned no rows, you want it to return no. rows when the query is reissued. This is implemented in SQL Server by a special kind of lock called the key-range lock. Key-range locks require that there be an index on the column that defines the range of values. If there is no index on the column, serializable isolation requires a table lock. Gets its name from the fact that running multiple serializable transactions at the same time is equivalent of running them one at a time. Now that we understand the basics of what concurrency is, the subsequent blog posts will try to bring out the basics around locking, blocking, deadlocks because they are the fundamental blocks that make concurrency possible. Now if you are with me – let us continue learning for SQL Server Locking Basics. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology Tagged: Concurrency

    Read the article

  • Looking Back at MIX10

    - by WeigeltRo
    It’s the sad truth of my life that even though I’m fascinated by airplanes and flight in general since my childhood days, my body doesn’t like flying. Even the ridiculously short flights inside Germany are taking their toll on me each time. Now combine this with sitting in the cramped space of economy class for many hours on a transatlantic flight from Germany to Las Vegas and back, and factor in some heavy dose of jet lag (especially on my way eastwards), and you get an idea why after coming back home I had this question on my mind: Was it really worth it to attend MIX10? This of course is a question that will also be asked by my boss at Comma Soft (for other reasons, obviously), who decided to send me and my colleague Jens Schaller, to the MIX10 conference. (A note to my German readers: An dieser Stelle der Hinweis, dass Comma Soft noch Silverlight-Entwickler und/oder UI-Designer für den Standort Bonn sucht – aussagekräftige Bewerbungen bitte an [email protected]) Too keep things short: My answer is yes. Before I’ll go into detail, let me ask the heretical questions whether tech conferences in general still make sense. There was a time, where actually being at a tech conference gave you a head-start in regard to learning about new technologies. Nowadays this is no longer true, where every bit of information and every detail is immediately twittered, blogged and whatevered to death. In the case of MIX10 you even can download the video-taped sessions shortly after. So: Does visiting a conference still make sense? It depends on what you expect from a conference. It should be clear to everybody that you’ll neither get exclusive information, nor receive training in a small group. What a conference does offer that sitting in front of your computer does not can be summarized as follows: Focus Being away from work and home will help you to focus on the presented information. Of course there are always the poor guys who are haunted by their work (with mails and short text messages reporting the latest showstopper problem), but in general being out of your office makes a huge difference. Inspiration With the focus comes the emotional involvement. I find it much easier to absorb information if I feel that certain vibe when sitting in a session. This still means that I have put work into reviewing the information later, but it’s a better starting point. And all the impressions collected at a (good) conference combined lead to a higher motivation – be it by the buzz (“this is gonna be sooo cool!”) or by the fear to fall behind (“man, we’ll have work on this, or else…”). People At a conference it’s pretty easy to get into contact with other people during breakfast, lunch and other breaks. This is a good opportunity to get a feel for what other development teams are doing (on a very general level of course, nobody will tell you about their secret formula) and what they are thinking about specific technologies. So MIX10 did offer focus, inspiration and people, but that would have meant nothing without valuable content. When I (being a frontend developer with a strong interest in UI/UX) planned my visit to MIX10, I made the decision to focus on the "soft" topics of design, interaction and user experience. I figured that I would be bombarded with all the technical details about Silverlight 4 anyway in the weeks and months to come. Actually, I would have liked to catch a few technical sessions, but the agenda wasn’t exactly in favor of people interested in any kind of Silverlight and UI/UX/Design topics. That’s one of my few complaints about the conference – I would have liked one more day and/or more sessions per day. Overall, the quality of the workshops and sessions was pretty high. In fact, looking back at my collection of conferences I’ve visited in the past I’d say that MIX10 ranks somewhere near the top spot. Here’s an overview of the workshops/sessions I attended (I’ll leave out the keynotes): Day 0 (Workshops on Sunday) Design Fundamentals for Developers Robby Ingebretsen is the man! Great workshop in three parts with the perfect mix of examples, well-structured definition of terminology and the right dose of humor. Robby was part of the WPF team before founding his own company so he not only has a strong interest in design (and the skillz!) but also the technical background.   Design Tools and Techniques Originally announced to be held by Arturo Toledo, the Rosso brothers from ArcheType filled in for the first two parts, and Corrina Black had a pretty general part about the Windows Phone UI. The first two thirds were a mixed bag; the two guys definitely knew what they were talking about, and the demos were great, but the talk lacked the preparation and polish of a truly great presentation. Corrina was not allowed to go into too much detail before the keynote on Monday, but the session was still very interesting as it showed how much thought went into the Windows Phone UI (and there’s always a lot to learn when people talk about their thought process). Day 1 (Monday) Designing Rich Experiences for Data-Centric Applications I wonder whether there was ever a test-run for this session, but what Ken Azuma and Yoshihiro Saito delivered in the first 15 minutes of a 30-minutes-session made me walk out. A commercial for a product (just great: a video showing a SharePoint plug-in in an all-Japanese UI) combined with the most generic blah blah one could imagine. EPIC FAIL.   Great User Experiences: Seamlessly Blending Technology & Design I switched to this session from the one above but I guess I missed the interesting part – what I did catch was what looked like a “look at the cool stuff we did” without being helpful. Or maybe I was just in a bad mood after the other session.   The Art, Technology and Science of Reading This talk by Kevin Larson was very interesting, but was more a presentation of what Microsoft is doing in research (pretty impressive) and in the end lacked a bit the helpful advice one could have hoped for.   10 Ways to Attack a Design Problem and Come Out Winning Robby Ingebretsen again, and again a great mix of theory and practice. The clean and simple, yet effective, UI of the reader app resulted in a simultaneous “wow” of Jens and me. If you’d watch only one session video, this should be it. Microsoft has to bring Robby back next year! Day 2 (Tuesday) Touch in Public: Multi-touch Interaction Design for Kiosks & Architectural Experiences Very interesting session by Jason Brush, a great inspiration with many details to look out for in the examples. Exactly what I was hoping for – and then some!   Designing Bing: Heart and Science How hard can it be to design the UI for a search engine? An input field and a list of results, that should be it, right? Well, not so fast! The talk by Paul Ray showed the many iterations to finally get it right (up to the choice of a specific blue for the links). And yes, I want an eye-tracking device to play around with!   The Elephant in the Room When Nishant Kothary presented a long list of what his session was not about, I told to myself (not having the description text present) “Am I in the wrong talk? Should I leave?”. Boy, was I wrong. A great talk about human factors in the process of designing stuff.   An Hour with Bill Buxton Having seen Bill Buxton’s presentation in the keynote, I just had to see this man again – even though I didn’t know what to expect. Being more or less unplanned and intended to be more of a conversation, the session didn’t provide a wealth of immediately useful information. Nevertheless Bill Buxton was impressive with his huge knowledge of seemingly everything. But this could/should have been a session some when in the evening and not in parallel to at least two other interesting talks. Day 3 (Wednesday) Design the Ordinary, Like the Fixie This session by DL Byron and Kevin Tamura started really well and brought across the message to keep things simple. But towards the end the talk lost some of its steam. And, as a member of the audience pointed out, they kind of ignored their own advice when they used a fancy presentation software other then PowerPoint that sometimes got in the way of showing things.   Developing Natural User Interfaces Speaking of alternative presentation software, Joshua Blake definitely had the most remarkable alternative to PowerPoint, a self-written program called NaturalShow that was controlled using multi-touch on a touch screen. Not a PowerPoint-killer, but impressive nevertheless. The (excellent) talk itself was kind of eye-opening in regard to what “multi-touch support” on various platforms (WPF, Silverlight, Windows Phone) actually means.   Treat your Content Right The talk by Tiffani Jones Brown wasn’t even on my planned schedule, but somehow I ended up in that session – and it was great. And even for people who don’t necessarily have to write content for websites, some points made by Tiffani are valid in many places, notably wherever you put texts with more than a single word into your UI. Creating Effective Info Viz in Microsoft Silverlight The last session of MIX10 I attended was kind of disappointing. At first things were very promising, with Matthias Shapiro giving a brief but well-structured introduction to info graphics and interactive visualizations. Then the live-coding began and while the result was interesting, too much time was spend on wrestling to get the code working. Ending earlier than planned, the talk was a bit light on actual content, but at least it included a nice list of resources. Conclusion It could be felt all across MIX10, UIs will take a huge leap forward; in fact, there are enough examples that have already. People who both have the technical know-how and at least a basic understanding of design (“literacy” as Bill Buxton called it) are in high demand. The concept of the MIX conference and initiatives like design.toolbox shows that Microsoft understands very well that frontend developers have to acquire new knowledge besides knowing how to hack code and putting buttons on a form. There are extremely exciting times before us, with lots of opportunity for those who are eager to develop their skills, that is for sure.

    Read the article

  • OK - What now? How do we become a Social Business?

    - by Michael Snow
    We hope that those of you that attended yesterday's Webcast with Brian Solis enjoyed Brian's discussion with Christian Finn for our last Webcast of the season for the Oracle Social Business Thought Leaders Series.  For those of you that may have missed the webcast or were stuck at a company holiday party - you'll be glad to hear that the webcast will be available On-Demand starting later today (12/14/12). And any of you who'd like to listen to a quick but informative podcast with Brian - can listen to that here. Some of you may still be left with questions about how to get from point A to point B and even more confused than when you started thinking about this new world of Digital Darwinism. The post below, grabbed from an abundance of great thought leadership prose on Brian's blog may help you frame the path you need to start walking sooner versus later to stay off of the endangered species list.  As you explore your path forward, please keep Oracle in mind - we do offer a wide range of solutions to help your organization 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} optimize the engagement for your customers, employees and partners. The Path from a Social Brand to a Social Business Brian Solis Originally posted May 2, 2012 I’ve been a long-time supporter of MediaTemple’s (MT)Residence program along with Gary Vaynerchuk, Neil Patel, and many others whom I respect. I wanted to share my “7 questions to answer to become a social business” with you here.. Social Media is pervasive and is becoming the new normal in corporate marketing. Brands who get this right are starting to build their own media networks rich with customer connections numbering in the millions. Right now, Coca-Cola has over 34 million fans on Facebook, but they’re hardly alone. Disney follows just behind with 29 million fans, Starbucks boasts 25 million, and Oreo, Red Bull, and Converse play host to over 20 million fans. If we were to look at other networks such as Twitter and Youtube, we would see a recurring theme. People are connecting en masse with the businesses they support and new media represents the ability to cultivate consumer relationships in ways not possible with traditional earned or paid media. Sounds great right? This might sound abrupt, but the truth is that we’re hardly realizing the potential of what lies before us. Everything begins with understanding not just how other brands are marketing themselves in social media, but also seeing what they’re not doing and envisioning what’s possible. We’re already approaching the first of many crossroads that new media will present. Do we take the path of a social brand or that of a social business? What’s the difference? A social brand is just that, a business that is remodeling or retrofitting its existing marketing practices to new media. A social business is something altogether different as it embraces introspection and extrospection to reevaluate internal and external processes, systems, and opportunities to transform into a living, breathing entity that adapts to market conditions and opportunities. It’s a tough decision to make right now especially at a time when all we read about is how much success many businesses are finding without having to answer this very question. With all of the newfound success in social networks, the truth is that we’re only just beginning to learn what’s possible and that’s where you come in. When compared to the investment in time and resources across the board, social media represents only a small part of the mix. But with your help, that’s all about to change. The CMO Survey, an organization that disseminates the opinions of top marketers in order to predict the future of markets, recently published a report that gave credence to the fact that social media is taking off. One of the most profound takeaways from the report was this gem; “The “like button” [in Facebook] packs more customer-acquisition punch than other demand-generating activities.” With insights like this, it’s easy to see why the race to social is becoming heated. The report also highlighted exactly where social fits in the marketing mix today and as you can see, despite all of the hype, it’s not a dominant focus yet. As of August 2011, the percentage of overall marketing budgets dedicated to social media hovered at around 7%. However, in 2012 the investment in social media will climb to 10%. And, in five years, social media is expected to represent almost 18% of the total marketing budget. Think about that for a moment. In 2016, social media will only represent 18%? Queue the sound of a record scratching here. With businesses finding success in social networks, why are businesses failing to realize the true opportunity brought forth by the ability to listen to, connect with, and engage with customers? While there’s value in earning views, driving traffic, and building connections through the 3F’s (friends, fans and followers), success isn’t just defined simply by what really amounts to low-hanging fruit. The truth is that businesses cannot measure what it is they don’t know to value. As a result, innovation in new engagement initiatives is stifled because we’re applying dated or inflexible frameworks to new paradigms. Social media isn’t owned by marketing, but instead the entire organization. This changes everything and makes your role so much more important. It’s up to you to learn how to think outside of the proverbial social media box to see what others don’t, the ability to improve customers experiences through the evolution of a social brand into a social business. Doing so will translate customer insights from what they do and don’t share in social networks into better products, services, and processes. See, customers want something more from their favorite businesses than creative campaigns, viral content, and everyday dialogue in social networks. Customers want to be heard and they want to know that you’re listening. How businesses use social media must remind them that they’re more than just an audience, consumer, or a conduit to “trigger” a desired social effect. Herein lies both the challenge and opportunity of social media. It’s bigger than marketing. It’s also bigger than customer service. It’s about building relationships with customers that improve experiences and more importantly, teaches businesses how to re-imagine products and internal processes to better adapt to potential crises and seize new opportunities. When it comes down to it, Twitter, Facebook, Youtube, Foursquare, are all channels for listening, learning, and engaging. It’s what you do within each channel that builds a community around your brand. And, at the end of the day, the value of the community you build counts for everything. It’s important to understand that we cannot assume that these networks simply exist for people to lineup for our marketing messages or promotional campaigns. Nor can we assume that they’re reeling in anticipation for simple dialogue. They want value. They want recognition. They want access to exclusive information and offers. They need direction, answers and resolution. What we’re talking about here is the multidimensional makeup of consumers and how a one-sided approach to social media forces the needs for social media to expand beyond traditional marketing to socialize the various departments, lines of business, and functions to engage based on the nature of the situation or opportunity. In the same CMO study, it was revealed that marketers believe that social media has a long way to go toward integrating into the overall company strategy. On a scale of 1-7, with one being “not integrated at all” and seven being “very integrated,” 22% chose “one.” Critical functions such as service, HR, sales, R&D, product marketing and development, IR, CSR, etc. are either not engaged or are operating social media within a silo disconnected from other efforts or possibilities. The problem is that customers don’t view a company by silo, instead they see one company, one brand, and their experience in social media forms an impression that eventually contributes to their view of your brand. The first step here is to understand business priorities and objectives to assess how social media can be additive in achieving these goals. Additionally, surveying the landscape to determine other areas of interest as its specifically related to your business. • Are customers seeking help or direction? • Who are your most valuable customers and what are they sharing? • How can you use social media to acquire and retain customers? - What ideas are circulating and how can you harness user generated activity and content to innovate or adapt to better meet the needs of customers? - How can you broaden a single customer view to recognize the varying needs of customers and how your organization can organize around each circumstance? - What insights exist based on how consumers are interacting with one another? How can this intelligence inform marketing, service, products and other important business initiatives? - How can your business extend their current efforts to deliver better customer experiences and in turn more effectively unit internal collaboration and communication? Customer demands far exceed the capabilities of the marketing department. While creating a social brand is a necessary endeavor, building a social business is an investment in customer relevance now and over time. Beyond relevance, a social business fosters a culture of change that unites employees and customers and sets a foundation for meaningful and beneficial relationships. Innovation, communication, and creativity are the natural byproducts of engagement and transformation. As a social brand, we are competing for the moment. As a social business, we are competing the future in all that we do today.

    Read the article

  • Software development is (mostly) a trade, and what to do about it

    - by Jeff
    (This is another cross-post from my personal blog. I don’t even remember when I first started to write it, but I feel like my opinion is well enough baked to share.) I've been sitting on this for a long time, particularly as my opinion has changed dramatically over the last few years. That I've encountered more crappy code than maintainable, quality code in my career as a software developer only reinforces what I'm about to say. Software development is just a trade for most, and not a huge academic endeavor. For those of you with computer science degrees readying your pitchforks and collecting your algorithm interview questions, let me explain. This is not an assault on your way of life, and if you've been around, you know I'm right about the quality problem. You also know the HR problem is very real, or we wouldn't be paying top dollar for mediocre developers and importing people from all over the world to fill the jobs we can't fill. I'm going to try and outline what I see as some of the problems, and hopefully offer my views on how to address them. The recruiting problem I think a lot of companies are doing it wrong. Over the years, I've had two kinds of interview experiences. The first, and right, kind of experience involves talking about real life achievements, followed by some variation on white boarding in pseudo-code, drafting some basic system architecture, or even sitting down at a comprooder and pecking out some basic code to tackle a real problem. I can honestly say that I've had a job offer for every interview like this, save for one, because the task was to debug something and they didn't like me asking where to look ("everyone else in the company died in a plane crash"). The other interview experience, the wrong one, involves the classic torture test designed to make the candidate feel stupid and do things they never have, and never will do in their job. First they will question you about obscure academic material you've never seen, or don't care to remember. Then they'll ask you to white board some ridiculous algorithm involving prime numbers or some kind of string manipulation no one would ever do. In fact, if you had to do something like this, you'd Google for a solution instead of waste time on a solved problem. Some will tell you that the academic gauntlet interview is useful to see how people respond to pressure, how they engage in complex logic, etc. That might be true, unless of course you have someone who brushed up on the solutions to the silly puzzles, and they're playing you. But here's the real reason why the second experience is wrong: You're evaluating for things that aren't the job. These might have been useful tactics when you had to hire people to write machine language or C++, but in a world dominated by managed code in C#, or Java, people aren't managing memory or trying to be smarter than the compilers. They're using well known design patterns and techniques to deliver software. More to the point, these puzzle gauntlets don't evaluate things that really matter. They don't get into code design, issues of loose coupling and testability, knowledge of the basics around HTTP, or anything else that relates to building supportable and maintainable software. The first situation, involving real life problems, gives you an immediate idea of how the candidate will work out. One of my favorite experiences as an interviewee was with a guy who literally brought his work from that day and asked me how to deal with his problem. I had to demonstrate how I would design a class, make sure the unit testing coverage was solid, etc. I worked at that company for two years. So stop looking for algorithm puzzle crunchers, because a guy who can crush a Fibonacci sequence might also be a guy who writes a class with 5,000 lines of untestable code. Fashion your interview process on ways to reveal a developer who can write supportable and maintainable code. I would even go so far as to let them use the Google. If they want to cut-and-paste code, pass on them, but if they're looking for context or straight class references, hire them, because they're going to be life-long learners. The contractor problem I doubt anyone has ever worked in a place where contractors weren't used. The use of contractors seems like an obvious way to control costs. You can hire someone for just as long as you need them and then let them go. You can even give them the work that no one else wants to do. In practice, most places I've worked have retained and budgeted for the contractor year-round, meaning that the $90+ per hour they're paying (of which half goes to the person) would have been better spent on a full-time person with a $100k salary and benefits. But it's not even the cost that is an issue. It's the quality of work delivered. The accountability of a contractor is totally transient. They only need to deliver for as long as you keep them around, and chances are they'll never again touch the code. There's no incentive for them to get things right, there's little incentive to understand your system or learn anything. At the risk of making an unfair generalization, craftsmanship doesn't matter to most contractors. The education problem I don't know what they teach in college CS courses. I've believed for most of my adult life that a college degree was an essential part of being successful. Of course I would hold that bias, since I did it, and have the paper to show for it in a box somewhere in the basement. My first clue that maybe this wasn't a fully qualified opinion comes from the fact that I double-majored in journalism and radio/TV, not computer science. Eventually I worked with people who skipped college entirely, many of them at Microsoft. Then I worked with people who had a masters degree who sucked at writing code, next to the high school diploma types that rock it every day. I still think there's a lot to be said for the social development of someone who has the on-campus experience, but for software developers, college might not matter. As I mentioned before, most of us are not writing compilers, and we never will. It's actually surprising to find how many people are self-taught in the art of software development, and that should reveal some interesting truths about how we learn. The first truth is that we learn largely out of necessity. There's something that we want to achieve, so we do what I call just-in-time learning to meet those goals. We acquire knowledge when we need it. So what about the gaps in our knowledge? That's where the most valuable education occurs, via our mentors. They're the people we work next to and the people who write blogs. They are critical to our professional development. They don't need to be an encyclopedia of jargon, but they understand the craft. Even at this stage of my career, I probably can't tell you what SOLID stands for, but you can bet that I practice the principles behind that acronym every day. That comes from experience, augmented by my peers. I'm hell bent on passing that experience to others. Process issues If you're a manager type and don't do much in the way of writing code these days (shame on you for not messing around at least), then your job is to isolate your tradespeople from nonsense, while bringing your business into the realm of modern software development. That doesn't mean you slap up a white board with sticky notes and start calling yourself agile, it means getting all of your stakeholders to understand that frequent delivery of quality software is the best way to deal with change and evolving expectations. It also means that you have to play technical overlord to make sure the education and quality issues are dealt with. That's why I make the crack about sticky notes, because without the right technique being practiced among your code monkeys, you're just a guy with sticky notes. You're asking your business to accept frequent and iterative delivery, now make sure that the folks writing the code can handle the same thing. This means unit testing, the right instrumentation, integration tests, automated builds and deployments... all of the stuff that makes it easy to see when change breaks stuff. The prognosis I strongly believe that education is the most important part of what we do. I'm encouraged by things like The Starter League, and it's the kind of thing I'd love to see more of. I would go as far as to say I'd love to start something like this internally at an existing company. Most of all though, I can't emphasize enough how important it is that we mentor each other and share our knowledge. If you have people on your staff who don't want to learn, fire them. Seriously, get rid of them. A few months working with someone really good, who understands the craftsmanship required to build supportable and maintainable code, will change that person forever and increase their value immeasurably.

    Read the article

  • Passing Strings by Ref

    - by SGWellens
    Humbled yet again…DOH! No matter how much experience you acquire, no matter how smart you may be, no matter how hard you study, it is impossible to keep fully up to date on all the nuances of the technology we are exposed to. There will always be gaps in our knowledge: Little 'dead zones' of uncertainty. For me, this time, it was about passing string parameters to functions. I thought I knew this stuff cold. First, a little review... Value Types and Ref Integers and structs are value types (as opposed to reference types). When declared locally, their memory storage is on the stack; not on the heap. When passed to a function, the function gets a copy of the data and works on the copy. If a function needs to change a value type, you need to use the ref keyword.  Here's an example:     // ---- declaration -----------------     public struct MyStruct    {        public string StrTag;    }     // ---- functions -----------------------     void SetMyStruct(MyStruct myStruct)     // pass by value    {        myStruct.StrTag = "BBB";    }     void SetMyStruct(ref MyStruct myStruct)  // pass by ref    {        myStruct.StrTag = "CCC";    }     // ---- Usage -----------------------     protected void Button1_Click(object sender, EventArgs e)    {        MyStruct Data;        Data.StrTag = "AAA";         SetMyStruct(Data);        // Data.StrTag is still "AAA"         SetMyStruct(ref Data);        // Data.StrTag is now "CCC"    } No surprises here. All value types like ints, floats, datetimes, enums, structs, etc. work the same way. And now on to... Class Types and Ref     // ---- Declaration -----------------------------     public class MyClass    {        public string StrTag;    }     // ---- Functions ----------------------------     void SetMyClass(MyClass myClass)  // pass by 'value'    {        myClass.StrTag = "BBB";    }     void SetMyClass(ref MyClass myClass)   // pass by ref    {        myClass.StrTag = "CCC";    }     // ---- Usage ---------------------------------------     protected void Button2_Click(object sender, EventArgs e)    {        MyClass Data = new MyClass();        Data.StrTag = "AAA";         SetMyClass(Data);          // Data.StrTag is now "BBB"         SetMyClass(ref Data);        // Data.StrTag is now "CCC"    }  No surprises here either. Since Classes are reference types, you do not need the ref keyword to modify an object. What may seem a little strange is that with or without the ref keyword, the results are the same: The compiler knows what to do. So, why would you need to use the ref keyword when passing an object to a function? Because then you can change the reference itself…ie you can make it refer to a completely different object. Inside the function you can do: myClass = new MyClass() and the old object will be garbage collected and the new object will be returned to the caller. That ends the review. Now let's look at passing strings as parameters. The String Type and Ref Strings are reference types. So when you pass a String to a function, you do not need the ref keyword to change the string. Right? Wrong. Wrong, wrong, wrong. When I saw this, I was so surprised that I fell out of my chair. Getting up, I bumped my head on my desk (which really hurt). My bumping the desk caused a large speaker to fall off of a bookshelf and land squarely on my big toe. I was screaming in pain and hopping on one foot when I lost my balance and fell. I struck my head on the side of the desk (once again) and knocked myself out cold. When I woke up, I was in the hospital where due to a database error (thanks Oracle) the doctors had put casts on both my hands. I'm typing this ever so slowly with just my ton..tong ..tongu…tongue. But I digress. Okay, the only true part of that story is that I was a bit surprised. Here is what happens passing a String to a function.     // ---- Functions ----------------------------     void SetMyString(String myString)   // pass by 'value'    {        myString = "BBB";    }     void SetMyString(ref String myString)  // pass by ref    {        myString = "CCC";    }     // ---- Usage ---------------------------------     protected void Button3_Click(object sender, EventArgs e)    {        String MyString = "AAA";         SetMyString(MyString);        // MyString is still "AAA"  What!!!!         SetMyString(ref MyString);        // MyString is now "CCC"    } What the heck. We should not have to use the ref keyword when passing a String because Strings are reference types. Why didn't the string change? What is going on?   I spent hours unssuccessfully researching this anomaly until finally, I had a Eureka moment: This code: String MyString = "AAA"; Is semantically equivalent to this code (note this code doesn't actually compile): String MyString = new String(); MyString = "AAA"; Key Point: In the function, the copy of the reference is pointed to a new object and THAT object is modified. The original reference and what it points to is unchanged. You can simulate this behavior by modifying the class example code to look like this:      void SetMyClass(MyClass myClass)  // call by 'value'    {        //myClass.StrTag = "BBB";        myClass = new MyClass();        myClass.StrTag = "BBB";    } Now when you call the SetMyClass function without using ref, the parameter is unchanged...just like the string example.  I hope someone finds this useful. Steve Wellens

    Read the article

  • Building Enterprise Smartphone App &ndash; Part 4: Application Development Considerations

    - by Tim Murphy
    This is the final part in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Application Development Considerations Now we get to the actual building of your solutions.  What are the skills and resources that will be needed in order to develop a smartphone application in the enterprise? Language Knowledge One of the first things you need to consider when you are deciding which platform language do you either have the most in house skill base or can you easily acquire.  If you already have developers who know Java or C# you may want to use either Android or Windows Phone.  You should also take into consideration the market availability of developers.  If your key developer leaves how easy is it to find a knowledgeable replacement? A second consideration when it comes to programming languages is the qualities exposed by the languages of a particular platform.  How well does that development language and its associated frameworks support things like security and access to the features of the smartphone hardware?  This will play into your overall cost of ownership if you have to create this infrastructure on your own. Manage Limited Resources Everything is limited on a smartphone: battery, memory, processing power, network bandwidth.  When developing your applications you will have to keep your footprint as small as possible in every way.  This means not running unnecessary processes in the background that will drain the battery or pulling more data over the airwaves than you have to.  You also want to keep your on device in as compact a format as possible. Mobile Design Patterns There are a number of design patterns that have either come to life because of smartphone development or have been adapted for this use.  The main pattern in the Windows Phone environment is the MVVM (Model-View-View-Model).  This is great for overall application structure and separation of concerns.  The fun part is trying to keep that separation as pure as possible.  Many of the other patterns may or may not have strict definitions, but some that you need to be concerned with are push notification, asynchronous communication and offline data storage. Real estate is limited on smartphones and even tablets. You are also limited in the type of controls that can be represented in the UI. This means rethinking how you modularize your application. Typing is also much harder to do so you want to reduce this as much as possible.  This leads to UI patterns.  While not what we would traditionally think of as design patterns the guidance each platform has for UI design is critical to the success of your application.  If user find the application difficult navigate they will not use it. Development Process Because of the differences in development tools required, test devices and certification and deployment processes your teams will need to learn new way of working together.  This will include the need to integrate service contracts of back-end systems with mobile applications.  You will also want to make sure that you present consistency across different access points to corporate data.  Your web site may have more functionality than your smartphone application, but it should have a consistent core set of functionality.  This all requires greater communication between sub-teams of your developers. Testing Process Testing of smartphone apps has a lot more to do with what happens when you lose connectivity or if the user navigates away from your application. There are a lot more opportunities for the user or the device to perform disruptive acts.  This should be your main testing concentration aside from the main business requirements.  You will need to do things like setting the phone to airplane mode and seeing what the application does in order to weed out any gaps in your handling communication interruptions. Need For Outside Experts Since this is a development area that is new to most companies the need for experts is a lot greater. Whether these are consultants, vendor representatives or just development community forums you will need to establish expert contacts. Nothing is more dangerous for your project timelines than a lack of knowledge.  Make sure you know who to call to avoid lengthy delays in your project because of knowledge gaps. Security Security has to be a major concern for enterprise applications. You aren't dealing with just someone's game standings. You are dealing with a companies intellectual property and competitive advantage. As such you need to start by limiting access to the application itself.  Once the user is in the app you need to ensure that the data is secure at all times.  This includes both local storage and across the wire.  This means if a platform doesn’t natively support encryption for these functions you will need to find alternatives to secure your data.  You also need to keep secret (encryption) keys obfuscated or locked away outside of the application. People can disassemble the code otherwise and break your encryption. Offline Capabilities As we discussed earlier one your biggest concerns is not having connectivity.  Because of this a good portion of your code may be dedicated to handling loss of connection and reconnection situations.  What do you do if you lose the network?  Back up all your transactions and store of any supporting data so that operations can continue off line. In order to support this you will need to determine the available flat file or local data base capabilities of the platform.  Any failed transactions will need to support a retry mechanism whether it is automatic or user initiated.  This also includes your services since they will need to be able to roll back partially completed transactions.  What ever you do, don’t ignore this area when you are designing your system. Deployment Each platform has different deployment capabilities. Some are more suited to enterprise situations than others. Apple's approach is probably the most mature at the moment. Prior to the current generation of smartphone platforms it would have been Windows CE. Windows Phone 7 has the limitation that the app has to be distributed through the same network as public facing applications. You mark them as private which means that they are only accessible by a direct URL. Unfortunately this does not make them undiscoverable (although it is very difficult). This will change with Windows Phone 8 where companies will be able to certify their own applications and distribute them.  Given this Windows Phone applications need to be more diligent with application access in order to keep them restricted to the company's employees. My understanding of the Android deployment schemes is that it is much less standardized then either iOS or Windows Phone. Someone would have to confirm or deny that for me though since I have not yet put the time into researching this platform further. Given my limited exposure to the iOS and Android platforms I have not been able to confirm this, but there are varying degrees of user involvement to install and keep applications updated. At one extreme the user just goes to a website to do the install and in other case they may need to download files and perform steps to install them. Future Bluetooth Today we use Bluetooth for keyboards, mice and headsets.  In the future it could be used to interrogate car computers or manufacturing systems or possibly retail machines by service techs.  This would open smartphones to greater use as a almost a Star Trek Tricorder.  You would get you all your data as well as being able to use it as a universal remote for just about any device or machine. Better corporation controlled deployment At least in the Windows Phone world the upcoming release of Windows Phone 8 will include a private certification and deployment option that is currently not available with Windows Phone 7 (Mango). We currently have to run the apps through the Marketplace certification process and use a targeted distribution method. Platform independent approaches HTML5 and JavaScript with Web Service has become a popular topic lately for not only creating flexible web site, but also creating cross platform mobile applications.  I’m not yet convinced that this lowest common denominator approach is viable in most cases, but it does have it’s place and seems to be growing.  Be sure to keep an eye on it. Summary From my perspective enterprise smartphone applications can offer a great competitive advantage to many companies.  They are not cheap to build and should be approached cautiously.  Understand the factors I have outlined in this series, do you due diligence and see if there is a portion of your business that can benefit from the mobile experience. del.icio.us Tags: Architecture,Smartphones,Windows Phone,iOS,Android

    Read the article

  • Issues using SoapUI with Eclipse

    - by Epitaph
    I get the following in the Error log when using the latest SoapUI 3.5. plugin in Eclipse Galileo on Ubuntu. Also, this seems to continually freeze Eclipse. I have tried a complete uninstall and restarting Eclipse with -clean argument to no avail. Has anyone encountered the same issue? Is there anything I can do to fix this? Could not acquire children from extension: com.eviware.soapui.eclipse.projectContent for Plugin org.eclipse.ui.navigator java.lang.NullPointerException at org.eclipse.ui.internal.navigator.NavigatorContentService.rememberContribution(NavigatorContentService.java:686) at org.eclipse.ui.internal.navigator.extensions.SafeDelegateTreeContentProvider.getElements(SafeDelegateTreeContentProvider.java:97) at org.eclipse.ui.internal.navigator.NavigatorContentServiceContentProvider.getElements(NavigatorContentServiceContentProvider.java:156) at org.eclipse.jface.viewers.StructuredViewer.getRawChildren(StructuredViewer.java:959) at org.eclipse.jface.viewers.ColumnViewer.getRawChildren(ColumnViewer.java:703) at org.eclipse.jface.viewers.AbstractTreeViewer.getRawChildren(AbstractTreeViewer.java:1330) at org.eclipse.jface.viewers.TreeViewer.getRawChildren(TreeViewer.java:390) at org.eclipse.jface.viewers.AbstractTreeViewer.getFilteredChildren(AbstractTreeViewer.java:636) at org.eclipse.jface.viewers.AbstractTreeViewer.getSortedChildren(AbstractTreeViewer.java:602) at org.eclipse.jface.viewers.AbstractTreeViewer.updateChildren(AbstractTreeViewer.java:2578) at org.eclipse.jface.viewers.AbstractTreeViewer.internalRefreshStruct(AbstractTreeViewer.java:1863) at org.eclipse.jface.viewers.TreeViewer.internalRefreshStruct(TreeViewer.java:716) at org.eclipse.jface.viewers.AbstractTreeViewer.internalRefresh(AbstractTreeViewer.java:1838) at org.eclipse.jface.viewers.AbstractTreeViewer.internalRefresh(AbstractTreeViewer.java:1794) at org.eclipse.ui.navigator.CommonViewer.internalRefresh(CommonViewer.java:566) at org.eclipse.jface.viewers.StructuredViewer$8.run(StructuredViewer.java:1484) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1392) at org.eclipse.jface.viewers.TreeViewer.preservingSelection(TreeViewer.java:402) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1353) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1482) at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:548) at org.eclipse.ui.navigator.CommonViewer.refresh(CommonViewer.java:358) at org.eclipse.ui.navigator.CommonViewer.refresh(CommonViewer.java:515) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1414) at org.eclipse.jface.viewers.StructuredViewer.addFilter(StructuredViewer.java:582) at org.eclipse.ui.internal.navigator.resources.actions.WorkingSetActionProvider.setWorkingSet(WorkingSetActionProvider.java:280) at org.eclipse.ui.internal.navigator.resources.actions.WorkingSetActionProvider$3.propertyChange(WorkingSetActionProvider.java:226) at org.eclipse.ui.internal.navigator.extensions.ExtensionStateModel.firePropertyChangeEvent(ExtensionStateModel.java:135) at org.eclipse.ui.internal.navigator.extensions.ExtensionStateModel.setBooleanProperty(ExtensionStateModel.java:90) at org.eclipse.ui.internal.navigator.resources.actions.WorkingSetActionProvider.restoreState(WorkingSetActionProvider.java:318) at org.eclipse.ui.navigator.NavigatorActionService.initialize(NavigatorActionService.java:372) at org.eclipse.ui.navigator.NavigatorActionService.getActionProviderInstance(NavigatorActionService.java:355) at org.eclipse.ui.navigator.NavigatorActionService.fillActionBars(NavigatorActionService.java:253) at org.eclipse.ui.navigator.CommonNavigatorManager.selectionChanged(CommonNavigatorManager.java:239) at org.eclipse.jface.viewers.Viewer$2.run(Viewer.java:162) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.core.runtime.Platform.run(Platform.java:888) at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:48) at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175) at org.eclipse.jface.viewers.Viewer.fireSelectionChanged(Viewer.java:160) at org.eclipse.jface.viewers.StructuredViewer.updateSelection(StructuredViewer.java:2132) at org.eclipse.jface.viewers.StructuredViewer.setSelection(StructuredViewer.java:1669) at org.eclipse.jface.viewers.TreeViewer.setSelection(TreeViewer.java:1124) at org.eclipse.ui.navigator.CommonViewer.setSelection(CommonViewer.java:380) at org.eclipse.ui.navigator.CommonNavigator.selectReveal(CommonNavigator.java:362) at org.eclipse.ui.internal.navigator.actions.LinkEditorAction$3.run(LinkEditorAction.java:101) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.navigator.actions.LinkEditorAction$2.runInUIThread(LinkEditorAction.java:89) at org.eclipse.ui.progress.UIJob$1.run(UIJob.java:95) at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134) at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3468) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3115) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311)

    Read the article

  • How do I sign my certificate using the root certificate

    - by Asif Alam
    I am using certificate based authentication between my server and client. I have generated Root Certificate. My client at the time of installation will generate a new Certificate and use the Root Certificate to sign it. I need to use Windows API. Cannot use any windows tools like makecert. Till now I have been able to Install the Root certificate in store. Below code X509Certificate2 ^ certificate = gcnew X509Certificate2("C:\\rootcert.pfx","test123"); X509Store ^ store = gcnew X509Store( "teststore",StoreLocation::CurrentUser ); store->Open( OpenFlags::ReadWrite ); store->Add( certificate ); store->Close(); Then open the installed root certificate to get the context GetRootCertKeyInfo(){ HCERTSTORE hCertStore; PCCERT_CONTEXT pSignerCertContext=NULL; DWORD dwSize = NULL; CRYPT_KEY_PROV_INFO* pKeyInfo = NULL; DWORD dwKeySpec; if ( !( hCertStore = CertOpenStore(CERT_STORE_PROV_SYSTEM, 0, NULL, CERT_SYSTEM_STORE_CURRENT_USER,L"teststore"))) { _tprintf(_T("Error 0x%x\n"), GetLastError()); } pSignerCertContext = CertFindCertificateInStore(hCertStore,MY_ENCODING_TYPE,0,CERT_FIND_ANY,NULL,NULL); if(NULL == pSignerCertContext) { _tprintf(_T("Error 0x%x\n"), GetLastError()); } if(!(CertGetCertificateContextProperty( pSignerCertContext, CERT_KEY_PROV_INFO_PROP_ID, NULL, &dwSize))) { _tprintf(_T("Error 0x%x\n"), GetLastError()); } if(pKeyInfo) free(pKeyInfo); if(!(pKeyInfo = (CRYPT_KEY_PROV_INFO*)malloc(dwSize))) { _tprintf(_T("Error 0x%x\n"), GetLastError()); } if(!(CertGetCertificateContextProperty( pSignerCertContext, CERT_KEY_PROV_INFO_PROP_ID, pKeyInfo, &dwSize))) { _tprintf(_T("Error 0x%x\n"), GetLastError()); } return pKeyInfo; } Then finally created the certificate and signed with the pKeyInfo // Acquire key container if (!CryptAcquireContext(&hCryptProv, _T("trykeycon"), NULL, PROV_RSA_FULL, CRYPT_MACHINE_KEYSET)) { _tprintf(_T("Error 0x%x\n"), GetLastError()); // Try to create a new key container _tprintf(_T("CryptAcquireContext... ")); if (!CryptAcquireContext(&hCryptProv, _T("trykeycon"), NULL, PROV_RSA_FULL, CRYPT_NEWKEYSET | CRYPT_MACHINE_KEYSET)) { _tprintf(_T("Error 0x%x\n"), GetLastError()); return 0; } else { _tprintf(_T("Success\n")); } } else { _tprintf(_T("Success\n")); } // Generate new key pair _tprintf(_T("CryptGenKey... ")); if (!CryptGenKey(hCryptProv, AT_SIGNATURE, 0x08000000 /*RSA-2048-BIT_KEY*/, &hKey)) { _tprintf(_T("Error 0x%x\n"), GetLastError()); return 0; } else { _tprintf(_T("Success\n")); } //some code CERT_NAME_BLOB SubjectIssuerBlob; memset(&SubjectIssuerBlob, 0, sizeof(SubjectIssuerBlob)); SubjectIssuerBlob.cbData = cbEncoded; SubjectIssuerBlob.pbData = pbEncoded; // Prepare algorithm structure for self-signed certificate CRYPT_ALGORITHM_IDENTIFIER SignatureAlgorithm; memset(&SignatureAlgorithm, 0, sizeof(SignatureAlgorithm)); SignatureAlgorithm.pszObjId = szOID_RSA_SHA1RSA; // Prepare Expiration date for self-signed certificate SYSTEMTIME EndTime; GetSystemTime(&EndTime); EndTime.wYear += 5; // Create self-signed certificate _tprintf(_T("CertCreateSelfSignCertificate... ")); CRYPT_KEY_PROV_INFO* aKeyInfo; aKeyInfo = GetRootCertKeyInfo(); pCertContext = CertCreateSelfSignCertificate(NULL, &SubjectIssuerBlob, 0, aKeyInfo, &SignatureAlgorithm, 0, &EndTime, 0); With the above code I am able to create the certificate but it does not looks be signed by the root certificate. I am unable to figure what I did is right or not.. Any help with be greatly appreciated.. Thanks Asif

    Read the article

  • Is Multicast broken for Android 2.0.1 (currently on the DROID) or am I missing something?

    - by Gubatron
    This code works perfectly in Ubuntu, in Windows and MacOSX, it also works fine with a Nexus-One currently running firmware 2.1.1. I start sending and listening multicast datagrams, and all the computers and the Nexus-One will see each other perfectly. Then I run the same code on a Droid (Firmware 2.0.1), and everybody will get the packets sent by the Droid, but the droid will listen only to it's own packets. This is the run() method of a thread that's constantly listening on a Multicast group for incoming packets sent to that group. I'm running my tests on a local network where I have multicast support enabled in the router. My goal is to have devices meet each other as they come on line by broadcasting packages to a multicast group. public void run() { byte[] buffer = new byte[65535]; DatagramPacket dp = new DatagramPacket(buffer, buffer.length); try{ MulticastSocket ms = new MulticastSocket(_port); ms.setNetworkInterface(_ni); //non loopback network interface passed ms.joinGroup(_ia); //the multicast address, currently 224.0.1.16 Log.v(TAG,"Joined Group " + _ia); while (true) { ms.receive(dp); String s = new String(dp.getData(),0,dp.getLength()); Log.v(TAG,"Received Package on "+ _ni.getName() +": " + s); Message m = new Message(); Bundle b = new Bundle(); b.putString("event", "Listener ("+_ni.getName()+"): \"" + s + "\""); m.setData(b); dispatchMessage(m); //send to ui thread } } catch (SocketException se) { System.err.println(se); } catch (IOException ie) { System.err.println(ie); } } Over here, is the code that sends the Multicast Datagram out of every valid network interface available (that's not the loopback interface). public void sendPing() { MulticastSocket ms = null; try { ms = new MulticastSocket(_port); ms.setTimeToLive(TTL_GLOBAL); List<NetworkInterface> interfaces = getMulticastNonLoopbackNetworkInterfaces(); for (NetworkInterface iface : interfaces) { //skip loopback if (iface.getName().equals("lo")) continue; ms.setNetworkInterface(iface); _buffer = ("FW-"+ _name +" PING ("+iface.getName()+":"+iface.getInetAddresses().nextElement()+")").getBytes(); DatagramPacket dp = new DatagramPacket(_buffer, _buffer.length,_ia,_port); ms.send(dp); Log.v(TAG,"Announcer: Sent packet - " + new String(_buffer) + " from " + iface.getDisplayName()); } } catch (IOException e) { e.printStackTrace(); } catch (Exception e2) { e2.printStackTrace(); } } Update (April 2nd 2010) I found a way to have the Droid's network interface to communicate using Multicast! _wifiMulticastLock = ((WifiManager) context.getSystemService(Context.WIFI_SERVICE)).createMulticastLock("multicastLockNameHere"); _wifiMulticastLock.acquire(); Then when you're done... if (_wifiMulticastLock != null && _wifiMulticastLock.isHeld()) _wifiMulticastLock.release(); After I did this, the Droid started sending and receiving UDP Datagrams on a Multicast group. gubatron

    Read the article

  • Tomcat 6, JPA and Data sources

    - by asrijaal
    Hi there, I'm trying to get a data source working in my jsf app. I defined the data source in my web-apps context.xml webapp/META-INF/context.xml <?xml version="1.0" encoding="UTF-8"?> <Context antiJARLocking="true" path="/Sale"> <Resource auth="Container" driverClassName="com.mysql.jdbc.Driver" maxActive="20" maxIdle="10" maxWait="-1" name="Sale" password="admin" type="javax.sql.DataSource" url="jdbc:mysql://localhost/sale" username="admin"/> </Context> web.xml <?xml version="1.0" encoding="UTF-8"?> <web-app version="2.5" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"> <filter> <display-name>RichFaces Filter</display-name> <filter-name>richfaces</filter-name> <filter-class>org.ajax4jsf.Filter</filter-class> </filter> <filter-mapping> <filter-name>richfaces</filter-name> <servlet-name>Faces Servlet</servlet-name> <dispatcher>REQUEST</dispatcher> <dispatcher>FORWARD</dispatcher> <dispatcher>INCLUDE</dispatcher> </filter-mapping> <servlet> <servlet-name>Faces Servlet</servlet-name> <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <servlet-mapping> <servlet-name>Faces Servlet</servlet-name> <url-pattern>/faces/*</url-pattern> </servlet-mapping> <session-config> <session-timeout> 30 </session-timeout> </session-config> <welcome-file-list> <welcome-file>faces/welcomeJSF.jsp</welcome-file> </welcome-file-list> <context-param> <param-name>org.richfaces.SKIN</param-name> <param-value>ruby</param-value> </context-param> </web-app> and my persistence.xml <?xml version="1.0" encoding="UTF-8"?> <persistence version="1.0" xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"> <persistence-unit name="SalePU" transaction-type="RESOURCE_LOCAL"> <provider>oracle.toplink.essentials.PersistenceProvider</provider> <non-jta-data-source>Sale</non-jta-data-source> <class>org.comp.sale.AnfrageAnhang</class> <class>org.comp.sale.Beschaffung</class> <class>org.comp.sale.Konto</class> <class>org.comp.sale.Anfrage</class> <exclude-unlisted-classes>false</exclude-unlisted-classes> </persistence-unit> </persistence> But no data source seems to be created by Tomcat, I only get this exception Exception [TOPLINK-7060] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.ValidationException Exception Description: Cannot acquire data source [Sale]. Internal Exception: javax.naming.NameNotFoundException: Name Sale is not bound in this Context The needed jars for the MySQL driver are included into the WEB-INF/lib dir. What I'm doing wrong?

    Read the article

  • Neo4j OutOfMemory problem

    - by Edward83
    Hi! This is my source code of Main.java. It was grabbed from neo4j-apoc-1.0 examples. The goal of modification to store 1M records of 2 nodes and 1 relation: package javaapplication2; import org.neo4j.graphdb.GraphDatabaseService; import org.neo4j.graphdb.Node; import org.neo4j.graphdb.RelationshipType; import org.neo4j.graphdb.Transaction; import org.neo4j.kernel.EmbeddedGraphDatabase; public class Main { private static final String DB_PATH = "neo4j-store-1M"; private static final String NAME_KEY = "name"; private static enum ExampleRelationshipTypes implements RelationshipType { EXAMPLE } public static void main(String[] args) { GraphDatabaseService graphDb = null; try { System.out.println( "Init database..." ); graphDb = new EmbeddedGraphDatabase( DB_PATH ); registerShutdownHook( graphDb ); System.out.println( "Start of creating database..." ); int valIndex = 0; for(int i=0; i<1000; ++i) { for(int j=0; j<1000; ++j) { Transaction tx = graphDb.beginTx(); try { Node firstNode = graphDb.createNode(); firstNode.setProperty( NAME_KEY, "Hello" + valIndex ); Node secondNode = graphDb.createNode(); secondNode.setProperty( NAME_KEY, "World" + valIndex ); firstNode.createRelationshipTo( secondNode, ExampleRelationshipTypes.EXAMPLE ); tx.success(); ++valIndex; } finally { tx.finish(); } } } System.out.println("Ok, client processing finished!"); } finally { System.out.println( "Shutting down database ..." ); graphDb.shutdown(); } } private static void registerShutdownHook( final GraphDatabaseService graphDb ) { // Registers a shutdown hook for the Neo4j instance so that it // shuts down nicely when the VM exits (even if you "Ctrl-C" the // running example before it's completed) Runtime.getRuntime().addShutdownHook( new Thread() { @Override public void run() { graphDb.shutdown(); } } ); } } After a few iterations (around 150K) I got error message: "java.lang.OutOfMemoryError: Java heap space at java.nio.HeapByteBuffer.(HeapByteBuffer.java:39) at java.nio.ByteBuffer.allocate(ByteBuffer.java:312) at org.neo4j.kernel.impl.nioneo.store.PlainPersistenceWindow.(PlainPersistenceWindow.java:30) at org.neo4j.kernel.impl.nioneo.store.PersistenceWindowPool.allocateNewWindow(PersistenceWindowPool.java:534) at org.neo4j.kernel.impl.nioneo.store.PersistenceWindowPool.refreshBricks(PersistenceWindowPool.java:430) at org.neo4j.kernel.impl.nioneo.store.PersistenceWindowPool.acquire(PersistenceWindowPool.java:122) at org.neo4j.kernel.impl.nioneo.store.CommonAbstractStore.acquireWindow(CommonAbstractStore.java:459) at org.neo4j.kernel.impl.nioneo.store.AbstractDynamicStore.updateRecord(AbstractDynamicStore.java:240) at org.neo4j.kernel.impl.nioneo.store.PropertyStore.updateRecord(PropertyStore.java:209) at org.neo4j.kernel.impl.nioneo.xa.Command$PropertyCommand.execute(Command.java:513) at org.neo4j.kernel.impl.nioneo.xa.NeoTransaction.doCommit(NeoTransaction.java:443) at org.neo4j.kernel.impl.transaction.xaframework.XaTransaction.commit(XaTransaction.java:316) at org.neo4j.kernel.impl.transaction.xaframework.XaResourceManager.commit(XaResourceManager.java:399) at org.neo4j.kernel.impl.transaction.xaframework.XaResourceHelpImpl.commit(XaResourceHelpImpl.java:64) at org.neo4j.kernel.impl.transaction.TransactionImpl.doCommit(TransactionImpl.java:514) at org.neo4j.kernel.impl.transaction.TxManager.commit(TxManager.java:571) at org.neo4j.kernel.impl.transaction.TxManager.commit(TxManager.java:543) at org.neo4j.kernel.impl.transaction.TransactionImpl.commit(TransactionImpl.java:102) at org.neo4j.kernel.EmbeddedGraphDbImpl$TransactionImpl.finish(EmbeddedGraphDbImpl.java:329) at javaapplication2.Main.main(Main.java:62) 28.05.2010 9:52:14 org.neo4j.kernel.impl.nioneo.store.PersistenceWindowPool logWarn WARNING: [neo4j-store-1M\neostore.propertystore.db.strings] Unable to allocate direct buffer" Guys! Help me plzzz, what I did wrong, how can I repair it? Tested on platform Windows XP 32bit SP3. Maybe solution within creation custom configuration? thnx 4 every advice!

    Read the article

  • SQL server deadlock between INSERT and SELECT statement

    - by dtroy
    Hi! I've got a problem with multiple deadlocks on SQL server 2005. This one is between an INSERT and a SELECT statement. There are two tables. Table 1 and Table2. Table2 has Table1's PK (table1_id) as foreign key. Index on table1_id is clustered. The INSERT inserts a single row into table2 at a time. The SELCET joins the 2 tables. (it's a long query which might take up to 12 secs to run) According to my understanding (and experiments) the INSERT should acquire an IS lock on table1 to check referential integrity (which should not cause a deadlock). But, in this case it acquired an IX page lock The deadlock report: <deadlock-list> <deadlock victim="process968898"> <process-list> <process id="process8db1f8" taskpriority="0" logused="2424" waitresource="OBJECT: 5:789577851:0 " waittime="12390" ownerId="61831512" transactionname="user_transaction" lasttranstarted="2010-04-16T07:10:13.347" XDES="0x222a8250" lockMode="IX" schedulerid="1" kpid="3764" status="suspended" spid="52" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-04-16T07:10:13.350" lastbatchcompleted="2010-04-16T07:10:13.347" clientapp=".Net SqlClient Data Provider" hostname="VIDEV01-B-ME" hostpid="3040" loginname="DatabaseName" isolationlevel="read uncommitted (1)" xactid="61831512" currentdb="5" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="DatabaseName.dbo.prcTable2_Insert" line="18" stmtstart="576" stmtend="1148" sqlhandle="0x0300050079e62d06e9307f000b9d00000100000000000000"> INSERT INTO dbo.Table2 ( f1, table1_id, f2 ) VALUES ( @p1, @p_DocumentVersionID, @p1 ) </frame> </executionStack> <inputbuf> Proc [Database Id = 5 Object Id = 103671417] </inputbuf> </process> <process id="process968898" taskpriority="0" logused="0" waitresource="PAGE: 5:1:46510" waittime="7625" ownerId="61831406" transactionname="INSERT" lasttranstarted="2010-04-16T07:10:12.717" XDES="0x418ec00" lockMode="S" schedulerid="2" kpid="1724" status="suspended" spid="53" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-04-16T07:10:12.713" lastbatchcompleted="2010-04-16T07:10:12.713" clientapp=".Net SqlClient Data Provider" hostname="VIDEV01-B-ME" hostpid="3040" loginname="DatabaseName" isolationlevel="read committed (2)" xactid="61831406" currentdb="5" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="DatabaseName.dbo.prcGetList" line="64" stmtstart="3548" stmtend="11570" sqlhandle="0x03000500dbcec17e8d267f000b9d00000100000000000000"> <!-- XXXXXXXXXXXXXX...SELECT STATEMENT WITH Multiple joins including both Table2 table 1 and .... XXXXXXXXXXXXXXX --> </frame> </executionStack> <inputbuf> Proc [Database Id = 5 Object Id = 2126630619] </inputbuf> </process> </process-list> <resource-list> <pagelock fileid="1" pageid="46510" dbid="5" objectname="DatabaseName.dbo.table1" id="lock6236bc0" mode="IX" associatedObjectId="72057594042908672"> <owner-list> <owner id="process8db1f8" mode="IX"/> </owner-list> <waiter-list> <waiter id="process968898" mode="S" requestType="wait"/> </waiter-list> </pagelock> <objectlock lockPartition="0" objid="789577851" subresource="FULL" dbid="5" objectname="DatabaseName.dbo.Table2" id="lock970a240" mode="S" associatedObjectId="789577851"> <owner-list> <owner id="process968898" mode="S"/> </owner-list> <waiter-list> <waiter id="process8db1f8" mode="IX" requestType="wait"/> </waiter-list> </objectlock> </resource-list> </deadlock> </deadlock-list> Can anyone explain why the INSERT gets the IX page lock ? Am I not reading the deadlock report properly? BTW, I have not managed to reproduce this issue. Thanks!

    Read the article

  • Java Synchronized List Deadlock

    - by portoalet
    From Effective Java 2nd edition item 67 page 266-268: The background thread calls s.removeObserver, which attempts to lock observers, but it can’t acquire the lock, because the main thread already has the lock. All the while, the main thread is waiting for the background thread to finish removing the observer, which explains the deadlock. I am trying to find out which threads deadlock in the main method by using ThreadMXBean (http://stackoverflow.com/questions/1102359/programmatic-deadlock-detection-in-java) , but why does it not return the deadlocked threads? I used a new Thread to run the ThreadMXBean detection. public class ObservableSet<E> extends ForwardingSet<E> { public ObservableSet(Set<E> set) { super(set); } private final List<SetObserver<E>> observers = new ArrayList<SetObserver<E>>(); public void addObserver(SetObserver<E> observer) { synchronized(observers) { observers.add(observer); } } public boolean removeObserver(SetObserver<E> observer) { synchronized(observers) { return observers.remove(observer); } } private void notifyElementAdded(E element) { synchronized(observers) { for (SetObserver<E> observer : observers) observer.added(this, element); } } @Override public boolean add(E element) { boolean added = super.add(element); if (added) notifyElementAdded(element); return added; } @Override public boolean addAll(Collection<? extends E> c) { boolean result = false; for (E element : c) result|=add(element); //callsnotifyElementAdded return result; } public static void main(String[] args) { ObservableSet<Integer> set = new ObservableSet<Integer>(new HashSet<Integer>()); final ThreadMXBean threadMxBean = ManagementFactory.getThreadMXBean(); Thread t = new Thread(new Runnable() { @Override public void run() { while( true ) { long [] threadIds = threadMxBean.findDeadlockedThreads(); if( threadIds != null) { ThreadInfo[] infos = threadMxBean.getThreadInfo(threadIds); for( ThreadInfo threadInfo : infos) { StackTraceElement[] stacks = threadInfo.getStackTrace(); for( StackTraceElement stack : stacks ) { System.out.println(stack.toString()); } } } try { System.out.println("Sleeping.."); TimeUnit.MILLISECONDS.sleep(1000); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } } } }); t.start(); set.addObserver(new SetObserver<Integer>() { public void added(ObservableSet<Integer> s, Integer e) { ExecutorService executor = Executors.newSingleThreadExecutor(); final SetObserver<Integer> observer = this; try { executor.submit(new Runnable() { public void run() { s.removeObserver(observer); } }).get(); } catch (ExecutionException ex) { throw new AssertionError(ex.getCause()); } catch (InterruptedException ex) { throw new AssertionError(ex.getCause()); } finally { executor.shutdown(); } } }); for (int i = 0; i < 100; i++) set.add(i); } } public interface SetObserver<E> { // Invoked when an element is added to the observable set void added(ObservableSet<E> set, E element); } // ForwardingSet<E> simply wraps another Set and forwards all operations to it.

    Read the article

< Previous Page | 11 12 13 14 15 16  | Next Page >