Search Results

Search found 1060 results on 43 pages for 'andy rose'.

Page 15/43 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Running Webapp on Mac in UTC (either changing MacBook timezone or tomcat timezone)

  - by Andy A

  To run my web app, I need to set my timezone to UTC on my MacBook. I can do this temporarily by opening a Konsole and entering sudo ln -sf /usr/share/zoneinfo/UTC /etc/localtime However, my timezone returns to normal when I restart my machine! Any advice? Edit : The response to this question by 'Celada' implies that I can just make my Server UTC. I am using Apache Tomcat 7. Adding to Celada's response, how can I make it UTC? Update - 3rd April : Following Celada's response, I have tried adding SetEnv TZ UTC at the top of startup.sh. This didn't seem to make a difference. After some research, I tried adding export JAVA_OPTS="-Duser.timezone=UTC" to startup.sh, but this too had no effect. Am I adding the correct command to the correct file?

  Read the article

• Why have my Aperture referenced files disappeared without trace?

  - by Andy Harvey

  I have an Aperture library that I've been using for several years. In the past week a number of recent photos and movies have mysteriously disappeared. The missing files were all safely imported within the last week (I had reviewed some of the movies within Aperture, so know this to be true). The files were all referenced on an external drive. Within Aperture the files now have a "referenced file can't be found" icon. I've tried searching for the missing files manually, including within the Aperture library package, but they cannot be found anywhere. How can I (a) work out where the missing files have gone, and (b) identify the cause and ensure it doesn't happen again? I'm using Aperture 3.3.2.

  Read the article

• Passenger throwing undefined method `-@' for "master":String after Puppet 3.0.0 upgrade

  - by Andy Shinn

  My Puppet master is using Passenger to serve. After upgrading to Puppet 3.0.0 I am getting the following error: [ pid=17576 thr=70231398486460 file=utils.rb:176 time=2012-10-01 17:37:12.892 ]: *** Exception NoMethodError in PhusionPassenger::Rack::ApplicationSpawner (undefined method `-@' for "master":String) (process 17576, thread #): from config.ru:7 from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `instance_eval' from /usr/lib/ruby/gems/1.8/gems/rack-1.4.1/lib/rack/builder.rb:51:in `initialize' from config.ru:1:in `new' from config.ru:1 My config.ru is as follows: # a config.ru, for use with every rack-compatible webserver. # SSL needs to be handled outside this, though. # if puppet is not in your RUBYLIB: # $LOAD_PATH.unshift('/opt/puppet/lib') $0 = "master" # if you want debugging: # ARGV << "--debug" ARGV << "--rack" # Rack applications typically don't start as root. Set --confdir to prevent # reading configuration from ~/.puppet/puppet.conf ARGV << "--confdir" << "/etc/puppet" # NOTE: it's unfortunate that we have to use the "CommandLine" class # here to launch the app, but it contains some initialization logic # (such as triggering the parsing of the config file) that is very # important. We should do something less nasty here when we've # gotten our API and settings initialization logic cleaned up. # # Also note that the "$0 = master" line up near the top here is # the magic that allows the CommandLine class to know that it's # supposed to be running master. # # --cprice 2012-05-22 require 'puppet/util/command_line' # we're usually running inside a Rack::Builder.new {} block, # therefore we need to call run *here*. run Puppet::Util::CommandLine.new.execute Any idea what may be happening?

  Read the article

• VPN Error 691 but server says authenticated on server

  - by Andy

  Hello all, I have a problem with a vpn connection on Windows XP SP3 that appears to be related to an account (maybe privilleges or an option that I have missed). When connecting using my account, which is a domain administrator account it will connect to through the vpn fine. However, using an account created for another person they receive Error 691: Username or Password is not valid for this domain. On the domain controller (windows 2003) I see a logon successful message: User DOMAIN\user was granted access. Fully-Qualified-User-Name = int.company.net.au/People/Management/User NAS-IP-Address = 10.30.0.3 NAS-Identifier = not present Client-Friendly-Name = MelbourneCore Client-IP-Address = Router-ip Calling-Station-Identifier = not present NAS-Port-Type = Virtual NAS-Port = 77 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = undetermined Policy-Name = Remote VPN Access Authentication-Type = MS-CHAPv1 EAP-Type = Does anyone have any ideas as to where else I should look for finding a solution? If i use the wrong password it gives a logon failure error in the event viewer. Also removing them from the remote access group gives a logon failure error. Nothing appears in the event viewer on the local machine. In the past all that is required is to add them into our Remote Access Users group. Any help?

  Read the article

• How can I suppress /etc/issue without losing error messages?

  - by Andy

  Is it possible to tell the ssh client to not print the connects of /etc/issue to stdout when connecting to a remote host, but to print out any other diagnostic (e.g. error) messages? Either using ssh -q or having LogLevel quiet in ~/.ssh/config suppresses the /etc/issue printing, but also turn off error messages. I've tried touching ~/.hushlogin as well - that stops /etc/motd being printed, but doesn't affect /etc/issue. The most obvious solution is just to remove /etc/issue, but company policy dictates the file be there with dire warnings about unauthorised access. This is non-negotiable. Unfortunately, I've got a bunch of scripts that run across quite a few hosts via ssh, and the log files are a) very large and b) full of legalese. Since quite a lot of stuff runs unattended, I don't want to lose any error messages that are printed.

  Read the article

• How do I get a Wireless N PCi card to connect to a wireless G router?

  - by Andy

  I'm having some problems setting up a new wireless PCI card on a WinXP SP3 PC. I know that the router is configured correctly. It is a Linksys WRT54GL, using 802.11b/g. Security mode is WPA2 Personal with TKIP+AES encryption. I am able to connect to this fine using my laptop (first gen MacBook with a 802.11b built in card). The new PCI card is also Linksys, but it supports 802.11n. Card seems to be installed ok (Windows sees it fine, doesn't list any errors in Device Manager), however when it scans for available wireless networks it can't find my wireless network (the router is set to broadcast the SSID). I tried to enter the network SSID manually, but that didn't seem to help. I chose WPA2-PSK for network authentication. The only options for encryption are TKIP or AES - I've tried both, neither worked. I am sure that I typed in my wireless key correctly. At this point, I don't think the problem is with encryption, but something else. It almost seems like I need to switch the wireless card into g mode, but I haven't found a way to do that (if that is even possible/necessary - I thought n was fully backwards compatible with g). Also, the PC is in the same room as the router, and my laptop, so I don't think that it is an interference issue. Any ideas what I'm doing wrong? I'm running out of things to try at this point. :(

  Read the article

• Full Disk Encryption for Mac (Not PGP)

  - by Andy

  I purchased PGP Whole Disk Encryption for my Macbook Pro, and it's exactly what I need. After the Symantec acquisition, PGP no longer sells single licenses of the software so I can't purchase a second copy for my iMac. Since I can no longer buy PGP Whole Disk Encryption, can anyone suggest an alternative? I'm currently using Filevault, but I specifically want whole disk encryption. I'm using a quad-core i7 iMac running Snow Leopard and I'm also hoping to protect my Windows Bootcamp partition.

  Read the article

• Getting error 0x000003eb when installing DDK sample printer drivers

  - by Andy

  I've got a development machine, which has been severly abused when it comes to installing and removing printer drivers. I'm now at the stage where I want to install some sample printer drivers from the DDK (WDK), but unfortunately I get the message 'Unable to install printer. Operation could not be completed (error 0x000003eb). So I tried installing the same printer driver built from the DDK in a clean Win 7 x64 VM, and it works, so the only thing I can imagine is that the driver store or driver folder may be slightly corrupt from the many previous printer drivers I had installed. So my question is, is there anyway I can clean my system of old printer drivers / file? Or any repair functionality in windows that may replace the common windows printer drivers?

  Read the article

• Mobile Intel® GMA 4500MHD boost

  - by Andy Smith

  My machine has a Mobile Intel® GMA 4500MHD integrated graphics chipset. The machine is currently running 64 bit windows 7 premium with 3GB of ram (1x1gb and 1x2gb). I note that the Mobile Intel® GMA 4500MHD shares the physical memory to process the graphics. now, the total available graphics memory can be up to 1,340 MB with a 32-bit operating system and 3 GB system memory or 1,759 MB with a 64-bit operating system and 4 GB system memory. I am considering investing in a 4GB stick to replace the 1gb stick bringing the total up to 6gb, mainly for an increase in graphics processing ability. Can anyone let me know what sort of power (if any over the 4gb) I could expect by upgrading to 6GB?

  Read the article

• Bridging Network Devices with Multiple IPs

  - by Andy

  I have a small server with a single NIC that I am trying to get a bridge functioning on so that I can run KVM. On this NIC I have a couple IPs statically assigned to it: eth0 = 192.168.1.1 eth0:1 = 192.168.1.2 eth0:2 = 192.168.1.3 eth0:3 -> Assign the bridge to this I am attempting to set up a bridge using the following instructions: sudo brctl addbr br0 sudo brctl addif br0 eth0:3 sudo ifconfig br0 192.168.1.120 netmask 255.255.255.0 up sudo route add -net 192.168.1.0 netmask 255.255.255.0 br0 sudo route add default gw 192.168.1.1 br0 sudo tunctl -b -u root -t tap0 > /dev/null sudo ifconfig tap0 up sudo brctl addif br0 tap0 However, when I do the second command: sudo brctl addif br0 eth0:3 It puts the ENTIRE eth0 device into promiscuous mode. This knocks the server offline and inaccessible by anything other than locally. Is there a way to bridge JUST eth0:3 to br0 and not put the entire device into promiscuous mode?

  Read the article

• Exchange enrypted messages with a single recipient

  - by Andy

  I need to exchange encrypted messages with another party. These would be in the form of email like communication (not instant chat). The solution needs to be portable (USB stick). I've tried "Portable Thunderbird/Enigmail/Gnupg/Hotmail account" but it's just impossible to setup portable, countless meaningless error messages. Anyway, I would prefer something more straightforward. Notes: We won't know each others IP addresses. Our computers will often be switched off. Encryption would ideally be using a common password. Is there a solution to this?

  Read the article

• Sun 280R architecture

  - by Andy

  How do I find out which architecture my Sun 280R is based on (eg . 501-6485 or 501-6690 etc) The command arch returns "sun4". Im running Solaris 10 Thanks

  Read the article

• Best Wordpress Last.fm plugin?

  - by Andy White

  Can anyone recommend a good Last.fm plugin for Wordpress? I've tried a few, but have not be entirely satisfied. I'm not looking for any specific features, just a good general plugin with maybe a few options.

  Read the article

• monitoring TCP/IP performance on Solaris

  - by Andy Faibishenko

  I am trying to tune a high message traffic system running on Solaris. The architecture is a large number (600) of clients which connect via TCP to a big Solaris server and then send/receive relatively small messages (.5 to 1K payload) at high rates. The goal is to minimize the latency of each message processed. I suspect that the TCP stack of the server is getting overwhelmed by all the traffic. What are some commands/metrics that I can use to confirm this, and in case this is true, what is the best way to alleviate this bottleneck?

  Read the article

• PERC 5/i Enable alarm on disks failures

  - by Andy M

  I'm trying to enable one the alarm of my server's raid controller PERC 5/i. Using this documentation, under the chapter Audible Alarm Warnings, it's explained that enabling an audible alarm is allowed in order to quickly spot failures on my hard disks. My trouble is that when entering the disk controller configuration (Ctrl+R at boot time), I'm able to set up lot of things but I cannot navigate to Enable Audible Alarm. I have : Enable Controller BIOS Enable Alarm Enable BIOS stop on Error I can navigate with my arrow keys to both the first and third items, but I cannot navigate to or select the second! It's not greyed out, and seems like I should be able to select go on this entry, but my cursor keep skipping it. Any ideas about what I'm missing here?

  Read the article

• SCTP stability and performance?

  - by Andy Faibishenko

  Anyone out there using SCTP? Especially on Solaris and Linux? What are your experiences - is it ready for production?

  Read the article

• CREDSSP 500 errors

  - by Andy Milsark

  Hello all, We are experience a 500 http error when trying to run remote powershell on a win 2008 R2 server. I have run enable-wsmancredssp for both client and server roles on this machine. I have also run "winrm quickconfig". Also the allowfreshcredentials delegation group policy is setup correctly as well. There are active listeners running and credssp is enabled for client and service. I can connect with kerberos (by not specifing authentication type), but the following remote powershell command fails: Enter-PSSession -ComputerName serverX -credential domain\user -Authentication Credssp Error: Enter-PSSession : Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information, see the about_Remote_Troubleshooting Help topic. At line:1 char:16 I have not been able to find any useful information on how to troubleshoot this. I have restarted Winrm, rebooted, disabled and re-enabled credssp. Please help.

  Read the article

• Monitoring bespoke software with Zenoss

  - by Andy S

  We've got a lot of back-end applications that we need to monitor the performance of (metrics such as orders waiting to be processed, time since last run, etc). Currently, this is done by an in-house watchdog application that fires out emails whenever a threshold is exceeded, but there's no way to acknowledge an issue and squelch these alerts. Rather than build our own complete alerting system, we'd like to tie in to the Zenoss installation we use to monitor our servers. I've found a few articles on creating events programmatically, but I'd rather Zenoss itself monitors the values that the current watchdog app is looking at (so we get the benefits of graphing and history as well). Is it possible, then, to programmatically provide a data feed (rather than an event) to Zenoss? Or is there another way to go about this?

  Read the article

• How can you test communication on a COM/Serial port?

  - by Andy

  We have a OHAUAS Weighting scales with a COM port. if we connect this to a PC we should be able to get the weight on the computer by sending a command to it. Is there a way to test this? i tried the command line echo "LP" com1 but this does nothing. A small C# application that listens to this port seems to be continuously receive Hexadecimal numbers (2 digits then an enter), however sending a command through this application doesn't give readable results. When i do listen on the port though, the echo "LP" com1 command gives an unavaible error, so sending the command works in cmd. Does anyone have any knowledge on a simple way to test a send and receive on a com port?

  Read the article

• Puppet performance compared to cfengine

  - by Andy

  I'm considering using Puppet or cfengine. Key factors are performance, and research on the internet suggests cfengine uses less memory and CPU cycles compared to puppet. However, puppet seems easier to use. I need to manage several web servers, as well as handheld tablets and machines that will only connect to some central control servers periodically. All are Linux machines. Would I be able to use either puppet or cfengine for this? And if so, does puppet still make poor use of resources? I'd like to use puppet because it seems simpler, but a lot of the articles I've found refer to cfengine 2 - is cfengine 3 easier to configure? Thanks

  Read the article

• What's the most popular portable applications manager?

  - by Andy Mikula

  I have a bunch of applications I carry around on a small flash drive, but I find it hard to keep everything up to date. I know about portableapps.com, but are there any other websites / repositories / resources on the subject? Ideally I'd like something that can manage both the 'installation' and updates for a range of tools.

  Read the article

• Chrome not selecting correct language for Help tab

  - by Andy

  When I click Help in Chrome, a new tab appears with the Google help links etc as expected, but I have a message saying: "This Help Centre is not currently available in your language...", etc. The drop down box at the bottom is not selected correctly for en-GB (my location). Instead it is set at the first language on the list. This happens if I am signed in to my Google account or not. Selecting English from the drop-down works ok, so no great drama. Just wondering if anybody else sees this behaviour? EDIT: Using current stable build 8.0.552.224

  Read the article

• Change location of RSS Dynamic Desktops

  - by Andy

  I'm currently using CCleaner to take care of my computer, but I also have a dynamic desktop background provided by Bing (I'm running Windows 7 HP) - and unfortunately the two conflict. Whenever I 'clean' my computer using CCleaner it messes up my destop backgrounds as they are stored in the temporary internet files directory, and for some reason I don't appear to be able to get as far as the 'Enclosures' sub directory in order to tell CCleaner to exclude the directory (I can see it in Windows Explorer but not in CCleaner's directory browser). Therefore, I am looking for an alternative solution to this problem and wondered if I could change the directory to which the images were downloaded on the RSS feed. If anybody knows how to do this, I would be grateful if you could share or indeed, I would be equally as greatful if anyone knows any other ways of getting around CCleaner. Please note that I don't want to stop cleaning the whole of my temporary internet files though - I just don't want the wallpapers that have been downloaded to be deleted... Thanks in advance!

  Read the article

• Modifier key bug with Adobe Design Standard CS4 (Mac OS 10.6.6)

  - by Andy

  When I launch the Adobe apps, they ask me if I want to delete the preferences file. I say 'no'. Then, when using the apps, none of the tools seem to work properly, eg in Illustrator, I can't move objects without it duplicating the object. Photoshop constantly displays the contextual menu icon that usually only appears when you hold down the control key. I can't do any work in them when this happens, so I am forced to log out and then back in. They work for a while and then this annoying bug happens again. I think it must be to do with the modifier keys (command option and control). I think Adobe's apps must think I'm permanently pressing the modifier keys down - the thing is, no other app on my machine has this problem! Does anyone else experience this? Or have a fix for it? Any suggestions much appreciated. Running: Mac OS X 10.6.6 on an iMac. Adobe CS4 Design standard installed.

  Read the article

• Step by step USB Wi-Fi driver install for mint 15

  - by Andy

  I'm running Linux mint 15 32 bit on a Dell inspiron 2200. I have given up trying to get the Broadcom BCM4318 built in wireless working, so bought a Dynamode Nano 802.11n wireless USB adapter. It came with an install disc. I have no idea how to install it. Could someone please point me in the right direction for full, idiot proof, step by step instructions. I've been using Ubuntu 12.04 but am totally new to mint 15, so best to assume no previous knowledge. Thanks in advance.

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >