Search Results

Search found 1121 results on 45 pages for 'arrow'.

Page 15/45 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • ray collision with rectangle and floating point accuracy

    - by phq
    I'm trying to solve a problem with a ray bouncing on a box. Actually it is a sphere but for simplicity the box dimensions are expanded by the sphere radius when doing the collision test making the sphere a single ray. It is done by projecting the ray onto all faces of the box and pick the one that is closest. However because I'm using floating point variables I fear that the projected point onto the surface might be interpreted as being below in the next iteration, also I will later allow the sphere to move which might make that scenario more likely. Also the bounce coefficient might be as low as zero, making the sphere continue along the surface. So my naive solution is to project not only forwards but backwards to catch those cases. That is where I got into problems shown in the figure: In the first iteration the first black arrow is calculated and we end up at a point on the surface of the box. In the second iteration the "back projection" hits the other surface making the second black arrow bounce on the wrong surface. If there are several boxes close to each other this has further consequences making the sphere fall through them all. So my main question is how to handle possible floating point accuracy when placing the sphere on the box surface so it does not fall through. In writing this question I got the idea to have a threshold to only accept back projections a certain amount much smaller than the box but larger than the possible accuracy limitation, this would only cause the "false" back projection when the sphere hit the box on an edge which would appear naturally. To clarify my original approach, the arrows shown in the image is not only the path the sphere travels but is also representing a single time step in the simulation. In reality the time step is much smaller about 0.05 of the box size. The path traveled is projected onto possible sides to avoid traveling past a thinner object at higher speeds. In normal situations the floating point accuracy is not an issue but there are two situations where I have the concern. When the new position at the end of the time step is located very close to the surface, very unlikely though. When using a bounce factor of 0, here it happens every time the sphere hit a box. To add some loss of accuracy, the motivation for my concern, is that the sphere and box are in different coordinate systems and thus the sphere location is transformed for every test. This last one is why I'm not willing to stand on luck that one floating point value lying on top of the box always will be interpreted the same. I did not know voronoi regions by name, but looking at it I'm not sure how it would be used in a projection scenario that I'm using here.

    Read the article

  • Google Calendar as Default Handler of iCal/ICS files

    - by Rasmus
    I would like for Google Calendar to open ICS files when I open them. In a way analogous to how Gmail can be set to be the default handler for mailto: links. More specifically, I would like for Google Calendar to import them to my primary calendar, which can manually be achieved by, when on Google Calendar, clicking the small arrow next to Other Calendars, then choosing Import Calendar, picking the appropriate file and choosing Import. I don't know if this is possible, but I'm hoping somebody will have a great idea.

    Read the article

  • Emaroo 1.4.0 Released

    - by WeigeltRo
    Emaroo is a free utility for browsing most recently used (MRU) lists of various applications. Quickly open files, jump to their folder in Windows Explorer, copy their path - all with just a few keystrokes or mouse clicks. tl;dr: Emaroo 1.4.0 is out, go download it on www.roland-weigelt.de/emaroo   Why Emaroo? Let me give you a few examples. Let’s assume you have pinned Emaroo to the first spot on the task bar so you can start it by hitting Win+1. To start one of the most recently used Visual Studio solutions you type Win+1, [maybe arrow key down a few times], Enter This means that you can start the most recent solution simply by Win+1, Enter What else? If you want to open an Explorer window at the file location of the solution, you type Ctrl+E instead of Enter.   If you know that the solution contains “foo” in its name, you can type “foo” to filter the list. Because this is not a general purpose search like e.g. the Search charm, but instead operates only on the MRU list of a single application, you usually have to type only a few characters until you can press Enter or Ctrl+E.   Ctrl+C copies the file path of the selected MRU item, Ctrl+Shift+C copies the directory If you have several versions of Visual Studio installed, the context menu lets you open a solution in a higher version.   Using the context menu, you can open a Visual Studio solution in Blend. So far I have only mentioned Visual Studio, but Emaroo knows about other applications, too. It remembers the last application you used, you can change between applications with the left/right arrow or accelerator keys. Press F1 or click the Emaroo icon (the tab to the right) for a quick reference. Which applications does Emaroo know about? Emaroo knows the MRU lists of Visual Studio 2008/2010/2012/2013 Expression Blend 4, Blend for Visual Studio 2012, Blend for Visual Studio 2013 Microsoft Word 2007/2010/2013 Microsoft Excel 2007/2010/2013 Microsoft PowerPoint 2007/2010/2013 Photoshop CS6 IrfanView (most recently used directories) Windows Explorer (directories most recently typed into the address bar) Applications that are not installed aren’t shown, of course. Where can I download it? On the Emaroo website: www.roland-weigelt.de/emaroo Have fun!

    Read the article

  • PPA Shows Up Under "All Software" That Is No Longer Enabled

    - by Icedrake
    I used to use the Aurora builds of Firefox, but now I've uninstalled Firefox and gone back to Chromium. I've removed the PPA, but it still shows up under "All Software" in the Ubuntu Software Center, when I click on the arrow to the side of it to display my PPAs. I've checked the Software Sources to see if there's anything leftover, and there's nothing. I use Y PPA Manager, and there's nothing there to remove as well. How do I get rid of it?

    Read the article

  • Icons can't be seen on Ubuntu 12.04 LTS's Launcher after updates

    - by Jan Tait
    After updating yesterday, (can unfortunately not remember the specific updates) the launcher could not be made to appear. Rebooting the system showed the launcher only as a black bar at the left edge of the screen without any icons in the launcher. If the mouse arrow is moved over the black launcher bar, the names of the applications next to the launcher appears. What could be done to have the icons to be visible in the launcher?

    Read the article

  • ubuntu 14.04 gnome crashed after installation

    - by agha rehan abbas
    i have recently installed ubuntu 14.04 gnome and i was dual booting with gnome and unity but suddenly gnome crashed as when i open it it shows just a blank screen with a single arrow mark and nothing else i have waited for 20 minutes but the screen did not changed i have made a264gb partition for gnome and now as gnome has stopped working can i get that partition again into unity or can i repair gnome to work properly i have used gnome once and it worked properly that time can any one solve this issue

    Read the article

  • How to model a many to many from a DDD perspective in UML?

    - by JD01
    I have a two entity objects Site and Customer where there is a many to many relationship. I have read you try not to model this in DDD as it is in the data model and go for a unidirectional flow. If I wanted to show this in UML, would I show it as it is in the data model: Site * ----->*Customer but the direction arrow gives the flow? or as following Site ----->*Customer But then this would imply that Customer can only go in one site.

    Read the article

  • Mouse Not Working Properly

    - by James
    I just did a clean install of Ubuntu 11.10 but for some reason the mouse isn't working properly. Problems I'm experiencing are: left button on the mouse doesn't work, the cursor doesn't highlight anything, as well, the right side will not do a double click function. Doesn't seem to bring up the mouse menu to "go back" as well, "go forward" options. In order to make things work, I have to use the Enter key, and arrow keys.

    Read the article

  • Control mouse pointer with keyboard without a number pad

    - by mloman
    I have dell laptop which does not have a numberpad, only a set of numbers above the qwerty layout. I want to be able to control the mouse cursor with my arrow keys. I activated the mouse keys by going to "System Setting" - "Universal Access" - "Pointing and Clicking" and activate "Mouse Keys" But still, I am unable to control the mouse cursor. How do I get this going so I don't have to take my hands off the keyboard?

    Read the article

  • How do I "alt-tab" between windows using Gnome 3?

    - by josmh
    All of the references I've found for Gnome 3 keyboard shortcuts list that alt+tab switches between applications and alt+` switches between windows (some actually say alt+~, but I think they're mistaken, and I've tried both anyway). Maybe that functionality works for Gnome 3 on Fedora or something, because no matter the key combo I try, nothing will switch between windows except for opening the alt+tab dialog and using arrow keys to navigate it (and at that point it's faster to just use a mouse..). How do I quickly switch between windows in Gnome 3?

    Read the article

  • jQuery facebook like popbox top navigation [migrated]

    - by Firz
    i just want to make facebook like popbox top navigation as below: http://i.stack.imgur.com/kQqJi.png the problem is, how to toggle another popbox named POPBOX2 with btn2, POPBOX3 with btn3 and so on. The LAYOUT of popBox2 and popBox3 same as popBox1, but the arrow of the popBox is under the btn. How to do this? i've copied my problem at this fiddle http://jsfiddle.net/FArIZzX77/dNVUj/ thanks for the answer :)

    Read the article

  • Converting Degrees to X and Y Coordinate change

    - by gopgop
    I am using a float positioning system in my game. IE float x,y,z now I want to get the location of the mouse, then to fire an arrow to it. X0 = the players X location X1 = the mouse X location Y0 = the players Y location Y1 = the mouse Y location I want to make a method that the parameters are Degrees and it sets my Yspeed and my Xspeed accordingly to get to the mouse xy starting at player xy How do would I accomplish this?

    Read the article

  • How to control gnome-terminal from Python scrypt?

    - by user936401
    I am developing an application in PyGtk, and would like to launch a gnome-terminal and output commands to it. My user should then be able to modify the command, or maybe ignore using the up arrow ... etc. I have been able to launch a terminal, but can't work out how to send commands. This is how my application starts: class App(Gtk.Window): def __init__(self): Gtk.Window.__init__(self) process=subprocess.Popen(["gnome-terminal", "--class=App", "--name=app"], shell=False, stdout=subprocess.PIPE, stderr=subprocess.PIPE) response,error=process.communicate()

    Read the article

  • SSIS 2012 formating quirks

    - by Kevin Shyr
    There are so many funny quirks in SSIS 2012 that I have to list them, to save other people from the misery. If you want to move items to one direction, make sure you "grab" the opposite side.  For example, you want a whole bunch of data flows to move up, select them all and grab the lowest item. When you drag the arrow to connect Precendence Constraint, make sure you drop it on the area of target that has no text, otherwise, it thinks you want to edit the text and change the target item layout

    Read the article

  • What is the shortcut key to skip the song in rhythmbox?

    - by orca
    When Rhythmbox is not active/not focused and when I am on some other application window. How to skip/stop/resume songs that are playing in Rhythmbox. Is there any shortcut key to do that? I know when I am on Ubuntu desktop I can press Alt+10 to get the focus of indicator applets from there I can navigate to Rhythmbox and use arrow keys to skip it ( <- / - ) but is there any other direct shortcut to do this? Thanks

    Read the article

  • How do I make camera move at same speed when rotating and moving forward

    - by dez
    I made a camera in DX9. To move forward I press the Up arrow. To rotate on the Y axis I use the mouse. When I perform these movements on their own the camera moves at the speed I want. However, if I hold down Up and move the mouse at the same time then the camera moves a lot faster than it should. I want it to move at the same speed as it does when only the Up arrow is pressed. I think I need to normalize something somewhere but not sure what and not sure where. Have tried various combinations without success so if anyone can point me in the right direction that would be great. Thanks. I've post code below. #define KEY_DOWN(vk_code) ((GetAsyncKeyState(vk_code) & 0x8000) ? 1 : 0) LRESULT WINAPI MsgProc( HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam ) { if( KEY_DOWN(VK_UP)) MovePlayer(D3DXVECTOR3(0, 0, -1.0f)); if( KEY_DOWN(VK_DOWN)) MovePlayer(D3DXVECTOR3(0, 0, 1.0f)); switch( msg ) { case WM_MOUSEMOVE: ProcessMouseInput(); } } void MovePlayer( D3DXVECTOR3 in_vec ) { D3DXMATRIX CameraRot; D3DXMatrixRotationY(&CameraRot,D3DXToRadian(AngleY)); D3DXVECTOR3 CameraRotTarget; D3DXVec3TransformNormal(&CameraRotTarget,&in_vec,&CameraRot); CameraPos += (m_timeElapsed * CameraRotTarget); } void ProcessMouseInput() { GetCursorPos( &CurrentMouseState ); if ((CurrentMouseState.x != GameMouseState.x) || (CurrentMouseState.y != GameMouseState.y)) { int dx = CurrentMouseState.x - GameMouseState.x; int dy = CurrentMouseState.y - GameMouseState.y; AngleY+=m_timeElapsed*dx*7.0f; } GameMouseState = CurrentMouseState; // Set back to window center in Render function } VOID UpdateCamera() { D3DXVECTOR3 CameraOrigTarget(0, 0, -1); D3DXVECTOR3 CameraOrigUp(0, 1, 0); D3DXMATRIX CameraRot; D3DXMATRIX CameraRotX; D3DXMatrixRotationX(&CameraRotX,D3DXToRadian(AngleX)); D3DXMATRIX CameraRotY; D3DXMatrixRotationY(&CameraRotY,D3DXToRadian(AngleY)); CameraRot = CameraRotX * CameraRotY; D3DXVECTOR3 CameraRotTarget; D3DXVec3TransformNormal(&CameraRotTarget,&CameraOrigTarget,&CameraRot); D3DXVECTOR3 CameraTarget; CameraTarget = CameraPos + CameraRotTarget; D3DXVECTOR3 vUpVec( 0.0f, 1.0f, 0.0f ); D3DXMatrixLookAtLH( &matView, &CameraPos, &CameraTarget, &vUpVec ); g_pd3dDevice->SetTransform( D3DTS_VIEW, &matView ); D3DXMatrixPerspectiveFovLH( &matProj, D3DX_PI / 4, 1.0f, 1.0f, 100.0f ); g_pd3dDevice->SetTransform( D3DTS_PROJECTION, &matProj ); }

    Read the article

  • What type of command can I use for shortcut assignment?

    - by navie
    We all know that Ubuntu 12 has a shortcut mapper under "Keyboard" utility. I wonder when it asks for "command" in the new shortcut dialog, what type of command can I use? I used to think that commands in terminal can also be used here, but it seems xdotool is not like that. btw, if xdotool is not the right solution, how to map a key combination to a another key? for e.g.: alt+j to Down arrow key Thank you

    Read the article

  • Synaptics Touchpad v7.4 cannot move while pressing a key?

    - by Miguel30215
    My Synaptics Touchpad v7.4 won't move when I'm using my arrow keys. Everywhere I've looked on the internet is telling me to go to Device Pointer Properties Settings Pointing Sensitivity Palm Check and adjust those Palm Check settings, but that option isn't there and it isn't anywhere else. I've also read about going to something called "Smart Sense" but I didn't see that either. If someone could please help me, I would really appreciate it.

    Read the article

  • Camera not working

    - by user17548
    I made a camera in DX9. To move forward I press the Up arrow. To rotate on the Y axis I use the mouse. When I perform these movements on their own the camera moves at the speed I want. However, if I hold down Up and move the mouse at the same time then the camera moves a lot faster than it should. I want it to move at the same speed as it does when only the Up arrow is pressed. I think I need to normalize something somewhere but not sure what and not sure where. Have tried various combinations without success so if anyone can point me in the right direction that would be great. Thanks. My code #define KEY_DOWN(vk_code) ((GetAsyncKeyState(vk_code) & 0x8000) ? 1 : 0) LRESULT WINAPI MsgProc( HWND hWnd, UINT msg, WPARAM wParam, LPARAM lParam ) { if( KEY_DOWN(VK_UP)) MovePlayer(D3DXVECTOR3(0, 0, -1.0f)); if( KEY_DOWN(VK_DOWN)) MovePlayer(D3DXVECTOR3(0, 0, 1.0f)); switch( msg ) { case WM_MOUSEMOVE: ProcessMouseInput(); } } void MovePlayer( D3DXVECTOR3 in_vec ) { D3DXMATRIX CameraRot; D3DXMatrixRotationY(&CameraRot,D3DXToRadian(AngleY)); D3DXVECTOR3 CameraRotTarget; D3DXVec3TransformNormal(&CameraRotTarget,&in_vec,&CameraRot); CameraPos += (m_timeElapsed * CameraRotTarget); } void ProcessMouseInput() { GetCursorPos( &CurrentMouseState ); if ((CurrentMouseState.x != GameMouseState.x) || (CurrentMouseState.y != GameMouseState.y)) { int dx = CurrentMouseState.x - GameMouseState.x; int dy = CurrentMouseState.y - GameMouseState.y; AngleY+=m_timeElapsed*dx*7.0f; } GameMouseState = CurrentMouseState; // Set back to window center in Render function } VOID UpdateCamera() { D3DXVECTOR3 CameraOrigTarget(0, 0, -1); D3DXVECTOR3 CameraOrigUp(0, 1, 0); D3DXMATRIX CameraRot; D3DXMATRIX CameraRotX; D3DXMatrixRotationX(&CameraRotX,D3DXToRadian(AngleX)); D3DXMATRIX CameraRotY; D3DXMatrixRotationY(&CameraRotY,D3DXToRadian(AngleY)); CameraRot = CameraRotX * CameraRotY; D3DXVECTOR3 CameraRotTarget; D3DXVec3TransformNormal(&CameraRotTarget,&CameraOrigTarget,&CameraRot); D3DXVECTOR3 CameraTarget; CameraTarget = CameraPos + CameraRotTarget; D3DXVECTOR3 vUpVec( 0.0f, 1.0f, 0.0f ); D3DXMatrixLookAtLH( &matView, &CameraPos, &CameraTarget, &vUpVec ); g_pd3dDevice->SetTransform( D3DTS_VIEW, &matView ); D3DXMatrixPerspectiveFovLH( &matProj, D3DX_PI / 4, 1.0f, 1.0f, 100.0f ); g_pd3dDevice->SetTransform( D3DTS_PROJECTION, &matProj ); }

    Read the article

  • Useful Excel keyboard shortcuts

    - by Ben Lings
    What keyboard shortcuts do you use in Excel? Things I've discovered recently and found very useful are: Shift + Space - select the current row Ctrl + Space - select the current column Ctrl + Shift + Space - select the block of contiguous cell Ctrl + + - Insert (as in the context menu). If the current row is selected, will insert a new row. Ctrl + - - Delete (as in the context menu). If the current row is selected, will delete entire row. What (apart from the normal cut, copy, paste, etc) do you use? Ctrl + 1 to open the Format dialog. Shift + F2 to add/edit a cell comment. Shift + F2, followed by Esc to select the current cell comment, which can then be moved around with the arrow keys (????) or deleted by pressing Del. Ctrl + ???? to move to the last non-blank cell in a series. This is usually the edge of a table, but not if you have blank cells in the path. Pressing End followed by an arrow key does the same thing. Alt + F11 to open the VBA editor. Alt + = to start a SUM() formula and go straight to selecting cells to be summed. Ctrl + G or F5 to jump to a cell by typing its coordinates (e.g. C3) Ctrl + Home to jump to the top left, usually A1 unless you you are in a frozen split view, in which case it will jump to the top left of the "data" area. Ctrl + ; and Ctrl + Shift + ; to insert the current date and time, respectively. I know Ben Lings already posted this one, but I find it indispensable.

    Read the article

  • See former key sequences in vim

    - by Vasiliy Sharapov
    Sometimes I share screen shots and clips of vim usage with others. It would be nice to expand on the part of the status bar highlighted in this picture: I would like some way to make previous key sequences visible as well, such as: y2w jj f[ p 2d - You can see the key sequences leading up to the current one. I'll elaborate on my wish list at the bottom. Is something like this is available as a plugin or vim script? The sheer number of scripts available on vim online makes this hard to find by keyword. Some features I would hope for (but seem improbable): Delimit key sequences with a non-keyboard character instead of space, and a different one for the current command, so y2w jj f[ p 2d might become y2w¦jj¦f[¦p » 2d Replace keys that have a letter alternative with the alternative, such as the right arrow key - ^[[C with the equivalent l. Edit: To clarify, the right arrow key is a valid key in vim, but has no character to represent it, the l key preforms the same function and could/should substitute it. Have previous keystrokes run all the way to the beginning of the line (instead of just one or two), and just have vim's command prompt overwrite it when necessary. Replace some keystrokes with a more elegant alternative, for example hhhhh with 5h or more impressively d2f) with d% (in the appropriate situation).

    Read the article

  • Outlook 2007 message formatting - pasted images

    - by Jack
    When you cut and past an image into a message window when composing a new email, the image will display as you would expect and formatting the image appears straight forward, However the pain happens when you click send. The recipient notices that the image will resize with the size of there outlook window. The original image size is ignored and no scrollbars appear. Howe do you stop this behaviour. When said image is pasted, say you want to place a graphic on top of the image such as an arrow. By using the ribbon, selecting the insert tab and choosing shapes, you go ahead and select the arrow shape and plonk it on to of the image, just where you want it, give it a nice colour and then send the email. As the recipient resizes there outlook message window, the image resizes but the shape remains where it was, now who wants that micros*a*ft! So, how do you A) make the shape resize with the image, so the shape stays where I put it in relation to the image, and b) stop the image resizing in the first place.

    Read the article

  • RTorrent stops my torrents, crashes, and I have to manually re-add torrents and start them. How can I stop this cycle of doom?

    - by meder
    I cannot use transmission which is the best torrent client because it's banned from one of the trackers I use, so I am forced to use rtorrent. Normally I am all for command-line programs, however rtorrent ( 0.8.6/0.12.6 ) is simply frustrating. It is not intuitive, imo. I have 400 MB left on the HD and that's more than enough to dl this 200 MB avi. Rtorrent stops the download, though. It says [CLOSED] near the torrent. I do ctrl-r and that invokes the local hash check, and after that's done rtorrent simply dies ( wtf? ). Afterwards, it gives me rtorrent: TrackerManager::send_later() m_control->set() == DownloadInfo::STOPPED. So that leads me to open rtorrent again, then hit ENTER and /home/meder/file.avi.torrent, down arrow, and ctrl-S. I am looking for multiple things... How can I tell rtorrent to not worry about disk space? Again, it stops the torrent if my HD only has 400 mb when the torrent I'm dling is 200 mb ( there are no other torrents ). Why does ctrl-R fail hard? Why does it cause rtorrent to crash? If #2 is not solvable, can someone provide an easy way to add a torrent and start it, a more efficient method than typing the torrent name, hitting the down arrow, and ctrl-S?

    Read the article

  • Need guidance on a Google Map application that has to show 250 000 polylines.

    - by lucian.jp
    I am looking for advice for an application I am developing that uses Google Map. Summary: A user has a list of criteria for searching a street segment that fulfills the criteria. The street segments will be colored with 3 colors for showing those below average, average and over average. Then the user clicks on the street segment to see an information window showing the properties of that specific segment hiding those not selected until he/she closes the window and other polyline becomes visible again. This looks quite like the Monopoly City Streets game Hasbro made some month ago the difference being I do not use Flash, I can’t use Open Street Map because it doesn’t list street segment (if it does the IDs won’t be the same anyway) and I do not have to show Google sketch building over. Information: I have a database of street segments with IDs, polyline points and centroid. The database has 6,000,000 street segment records in it. To narrow the generated data a bit we focus on city. The largest city we must show has 250,000 street segments. This means 250,000 line segment polyline to show. Our longest polyline uses 9600 characters which is stored in two 8000 varchar columns in SQL Server 2008. We need to use the API v3 because it is faster than the API v2 and the application will be ported to iPhone. For now it's an ASP.NET 3.5 with SQl Server 2008 application. Performance is a priority. Problems: Most of the demo projects that do this are made with API v2. So besides tutorial on the Google API v3 reference page I have nothing to compare performance or technology use to achieve my goal. There is no available .NET wrapper for the API v3 yet. Generating a 250,000 line segment polyline creates a heavy file which takes time to transfer and parse. (I have found a demo of one polyline of 390,000 points. I think the encoder would be far less efficient with more polylines with less points since there will be less rounding.) Since streets segments are shown based on criteria, polylines must be dynamically created and cache can't be used. Some thoughts: KML/KMZ: Pros: Since it is a standard we can easily load Bing maps, Yahoo! maps, Google maps, Google Earth, with the same KML file. The data generation would be the same. Cons: LineString in KML cannot be encoded polyline like the Google map API can handle. So it would probably be bigger and slower to display. Zipping the file at the size it will take more processing time and require the client side to uncompress the data and I am not quite sure with 250,000 data how an iPhone would handle this and how a server would handle 40 users browsing at the same time. JavaScript file: Pros: JavaScript file can have encoded polyline and would significantly reduce the file to transfer. Cons: Have to create my own stripped version of API v3 to add overlays, create polyline, etc. It is more complex than just create a KML file and point to the source. GeoRSS: This option isn't adapted for my needs I think, but I could be wrong. MapServer: I saw some post suggesting using MapServer to generate overlays. Not quite sure for the connection with our database and the performance it would give. Plus it requires a plugin for generating KML. It seems to me that it wouldn't allow me to do better than creating my own KML or JavaScript file. Maintenance would be simpler without. Monopoly City Streets: The game is now over, but for those who know what I am talking about Monopoly City Streets was showing at max zoom level only the streets that the centroid was inside the Bounds of the window. Moving the map was sending request to the server for the new streets to show. While I think this was ingenious, I have no idea how to implement something similar. The only thing I thought about was to compare if the long was inside the bound of map area X and same with Y. While this could improve performance significantly at high zoom level, this would give nothing when showing a whole city. Clustering: While cluster is awesome for marker, it seems we cannot cluster polylines. I would have liked something like MarkerClusterer for polylines and be able to cluster by my 3 polyline colors. This will probably stay as a “would have been freaking awesome but forget it”. Arrow: I will have in a future version to show a direction for the polyline and will have to show an arrow at the centroid. Loading an image or marker will only double my data so creating a custom overlay will probably be my only option. I have found that demo for something similar I would like to achieve. Unfortunately, the demo is very slow, but I only wish to show 1 arrow per polyline and not multiple like the demo. This functionality will depend on the format of data since I don't think KML support custom overlays. Criteria: While the application is done with ASP.NET 3.5, the port to the iPhone won't use the web to show the application and be limited in screen size for selecting the criteria. This is why I was more orienting on a service or page generating the file based on criteria passed in parameters. The service would than generate the file I need to display the polylines on the map. I could also create an aspx page that does this. The aspx page is more documented than the service way. There should be a reason. Questions: Should I create a web service to returns the street segments file or create an aspx page that return the file? Should I create a JavaScript file with encoded polyline or a KML with longitude/latitude based on the fact that maximum longitude/latitude polyline have 9600 characters and I have to render maximum 250,000 line segment polyline. Or should I go with a MapServer that generate the overlay? Will I be able to display simple arrow on the polyline on the next version. In case of KML generation is it faster to create the file with XDocument, XmlDocument, XmlWriter and this manually or just serialize the street segment in the stream? This is more a brainstorming Stack Overflow question than an actual code problem. Any answer helping narrow the possibilities is as good as someone having all the knowledge to point me out a better choice.

    Read the article

  • Recover Data Like a Forensics Expert Using an Ubuntu Live CD

    - by Trevor Bekolay
    There are lots of utilities to recover deleted files, but what if you can’t boot up your computer, or the whole drive has been formatted? We’ll show you some tools that will dig deep and recover the most elusive deleted files, or even whole hard drive partitions. We’ve shown you simple ways to recover accidentally deleted files, even a simple method that can be done from an Ubuntu Live CD, but for hard disks that have been heavily corrupted, those methods aren’t going to cut it. In this article, we’ll examine four tools that can recover data from the most messed up hard drives, regardless of whether they were formatted for a Windows, Linux, or Mac computer, or even if the partition table is wiped out entirely. Note: These tools cannot recover data that has been overwritten on a hard disk. Whether a deleted file has been overwritten depends on many factors – the quicker you realize that you want to recover a file, the more likely you will be able to do so. Our setup To show these tools, we’ve set up a small 1 GB hard drive, with half of the space partitioned as ext2, a file system used in Linux, and half the space partitioned as FAT32, a file system used in older Windows systems. We stored ten random pictures on each hard drive. We then wiped the partition table from the hard drive by deleting the partitions in GParted. Is our data lost forever? Installing the tools All of the tools we’re going to use are in Ubuntu’s universe repository. To enable the repository, open Synaptic Package Manager by clicking on System in the top-left, then Administration > Synaptic Package Manager. Click on Settings > Repositories and add a check in the box labelled “Community-maintained Open Source software (universe)”. Click Close, and then in the main Synaptic Package Manager window, click the Reload button. Once the package list has reloaded, and the search index rebuilt, search for and mark for installation one or all of the following packages: testdisk, foremost, and scalpel. Testdisk includes TestDisk, which can recover lost partitions and repair boot sectors, and PhotoRec, which can recover many different types of files from tons of different file systems. Foremost, originally developed by the US Air Force Office of Special Investigations, recovers files based on their headers and other internal structures. Foremost operates on hard drives or drive image files generated by various tools. Finally, scalpel performs the same functions as foremost, but is focused on enhanced performance and lower memory usage. Scalpel may run better if you have an older machine with less RAM. Recover hard drive partitions If you can’t mount your hard drive, then its partition table might be corrupted. Before you start trying to recover your important files, it may be possible to recover one or more partitions on your drive, recovering all of your files with one step. Testdisk is the tool for the job. Start it by opening a terminal (Applications > Accessories > Terminal) and typing in: sudo testdisk If you’d like, you can create a log file, though it won’t affect how much data you recover. Once you make your choice, you’re greeted with a list of the storage media on your machine. You should be able to identify the hard drive you want to recover partitions from by its size and label. TestDisk asks you select the type of partition table to search for. In most cases (ext2/3, NTFS, FAT32, etc.) you should select Intel and press Enter. Highlight Analyse and press enter. In our case, our small hard drive has previously been formatted as NTFS. Amazingly, TestDisk finds this partition, though it is unable to recover it. It also finds the two partitions we just deleted. We are able to change their attributes, or add more partitions, but we’ll just recover them by pressing Enter. If TestDisk hasn’t found all of your partitions, you can try doing a deeper search by selecting that option with the left and right arrow keys. We only had these two partitions, so we’ll recover them by selecting Write and pressing Enter. Testdisk informs us that we will have to reboot. Note: If your Ubuntu Live CD is not persistent, then when you reboot you will have to reinstall any tools that you installed earlier. After restarting, both of our partitions are back to their original states, pictures and all. Recover files of certain types For the following examples, we deleted the 10 pictures from both partitions and then reformatted them. PhotoRec Of the three tools we’ll show, PhotoRec is the most user-friendly, despite being a console-based utility. To start recovering files, open a terminal (Applications > Accessories > Terminal) and type in: sudo photorec To begin, you are asked to select a storage device to search. You should be able to identify the right device by its size and label. Select the right device, and then hit Enter. PhotoRec asks you select the type of partition to search. In most cases (ext2/3, NTFS, FAT, etc.) you should select Intel and press Enter. You are given a list of the partitions on your selected hard drive. If you want to recover all of the files on a partition, then select Search and hit enter. However, this process can be very slow, and in our case we only want to search for pictures files, so instead we use the right arrow key to select File Opt and press Enter. PhotoRec can recover many different types of files, and deselecting each one would take a long time. Instead, we press “s” to clear all of the selections, and then find the appropriate file types – jpg, gif, and png – and select them by pressing the right arrow key. Once we’ve selected these three, we press “b” to save these selections. Press enter to return to the list of hard drive partitions. We want to search both of our partitions, so we highlight “No partition” and “Search” and then press Enter. PhotoRec prompts for a location to store the recovered files. If you have a different healthy hard drive, then we recommend storing the recovered files there. Since we’re not recovering very much, we’ll store it on the Ubuntu Live CD’s desktop. Note: Do not recover files to the hard drive you’re recovering from. PhotoRec is able to recover the 20 pictures from the partitions on our hard drive! A quick look in the recup_dir.1 directory that it creates confirms that PhotoRec has recovered all of our pictures, save for the file names. Foremost Foremost is a command-line program with no interactive interface like PhotoRec, but offers a number of command-line options to get as much data out of your had drive as possible. For a full list of options that can be tweaked via the command line, open up a terminal (Applications > Accessories > Terminal) and type in: foremost –h In our case, the command line options that we are going to use are: -t, a comma-separated list of types of files to search for. In our case, this is “jpeg,png,gif”. -v, enabling verbose-mode, giving us more information about what foremost is doing. -o, the output folder to store recovered files in. In our case, we created a directory called “foremost” on the desktop. -i, the input that will be searched for files. This can be a disk image in several different formats; however, we will use a hard disk, /dev/sda. Our foremost invocation is: sudo foremost –t jpeg,png,gif –o foremost –v –i /dev/sda Your invocation will differ depending on what you’re searching for and where you’re searching for it. Foremost is able to recover 17 of the 20 files stored on the hard drive. Looking at the files, we can confirm that these files were recovered relatively well, though we can see some errors in the thumbnail for 00622449.jpg. Part of this may be due to the ext2 filesystem. Foremost recommends using the –d command-line option for Linux file systems like ext2. We’ll run foremost again, adding the –d command-line option to our foremost invocation: sudo foremost –t jpeg,png,gif –d –o foremost –v –i /dev/sda This time, foremost is able to recover all 20 images! A final look at the pictures reveals that the pictures were recovered with no problems. Scalpel Scalpel is another powerful program that, like Foremost, is heavily configurable. Unlike Foremost, Scalpel requires you to edit a configuration file before attempting any data recovery. Any text editor will do, but we’ll use gedit to change the configuration file. In a terminal window (Applications > Accessories > Terminal), type in: sudo gedit /etc/scalpel/scalpel.conf scalpel.conf contains information about a number of different file types. Scroll through this file and uncomment lines that start with a file type that you want to recover (i.e. remove the “#” character at the start of those lines). Save the file and close it. Return to the terminal window. Scalpel also has a ton of command-line options that can help you search quickly and effectively; however, we’ll just define the input device (/dev/sda) and the output folder (a folder called “scalpel” that we created on the desktop). Our invocation is: sudo scalpel /dev/sda –o scalpel Scalpel is able to recover 18 of our 20 files. A quick look at the files scalpel recovered reveals that most of our files were recovered successfully, though there were some problems (e.g. 00000012.jpg). Conclusion In our quick toy example, TestDisk was able to recover two deleted partitions, and PhotoRec and Foremost were able to recover all 20 deleted images. Scalpel recovered most of the files, but it’s very likely that playing with the command-line options for scalpel would have enabled us to recover all 20 images. These tools are lifesavers when something goes wrong with your hard drive. If your data is on the hard drive somewhere, then one of these tools will track it down! Similar Articles Productive Geek Tips Recover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDUse an Ubuntu Live CD to Securely Wipe Your PC’s Hard DriveReset Your Ubuntu Password Easily from the Live CDBackup Your Windows Live Writer SettingsAdding extra Repositories on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook Recycle !

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >