delimiter - Page 15 - Developer IT

Simplest way to mix sequences of types with iostreams?

- by Kylotan

I have a function void write<typename T>(const T&) which is implemented in terms of writing the T object to an ostream, and a matching function T read<typename T>() that reads a T from an istream. I am basically using iostreams as a plain text serialisation format, which obviously works fine for most built-in types, although I'm not sure how to effectively handle std::strings just yet. I'd like to be able to write out a sequence of objects too, eg void write<typename T>(const std::vector<T>&) or an iterator based equivalent (although in practice, it would always be used with a vector). However, while writing an overload that iterates over the elements and writes them out is easy enough to do, this doesn't add enough information to allow the matching read operation to know how each element is delimited, which is essentially the same problem that I have with a single std::string. Is there a single approach that can work for all basic types and std::string? Or perhaps I can get away with 2 overloads, one for numerical types, and one for strings? (Either using different delimiters or the string using a delimiter escaping mechanism, perhaps.)

Read the article

mysql stored funtion usage

- by shikhar

I just wrote a stored function to calculate the working days between two dates. This works select CountWeekDays('2010-03-07','2010-04-07') This doesn't work select CountWeekDays(o.order_date,o.created_date) from orders o; Any idea how to make this one work ?? function definition delimiter $$; CREATE FUNCTION CountWeekDays (sdate VARCHAR(50), edate VARCHAR(50)) RETURNS INT BEGIN DECLARE wdays, tdiff, counter, thisday smallint; DECLARE newdate DATE; SET newdate := sdate; SET wdays = 0; if DATEDIFF(edate, sdate) = 0 THEN RETURN 1; END IF; if DATEDIFF(edate, sdate) < 0 THEN RETURN 0; END IF; label1: LOOP SET thisday = DAYOFWEEK(newdate); IF thisday BETWEEN 2 AND 6 THEN SET wdays := wdays + 1; END IF; SET newdate = DATE_ADD(newdate, INTERVAL 1 DAY); IF DATEDIFF(edate, newdate) < 0 THEN LEAVE label1; END IF; END LOOP label1; RETURN wdays; END

Read the article

Reserve space for initially hidden widget in QVBoxLayout

- by Skinniest Man

I am using a QVBoxLayout to arrange a vertical stack of widgets. I want some of them to be initially hidden and only show up when a check box is checked. Here is an example of the code I'm using. MyWidget::MyWidget(QWidget *parent) : QWidget(parent) { QVBoxLayout *layout = new QVBoxLayout(this); QLabel *labelLogTypes = new QLabel(tr("Log Types")); m_checkBoxCsv = new QCheckBox(tr("&Delimited File (CSV)")); m_labelDelimiter = new QLabel(tr("Delimiter:")); m_lineEditDelimiter = new QLineEdit(","); checkBoxCsv_Toggled(m_checkBoxCsv-isChecked()); connect(m_checkBoxCsv, SIGNAL(toggled(bool)), SLOT(checkBoxCsv_Toggled(bool))); QHBoxLayout *layoutDelimitedChar = new QHBoxLayout(); layoutDelimitedChar-addWidget(m_labelDelimiter); layoutDelimitedChar-addWidget(m_lineEditDelimiter); m_checkBoxXml = new QCheckBox(tr("&XML File")); m_checkBoxText = new QCheckBox(tr("Plain &Text File")); // Now that everything is constructed, put it all together // in the main layout. layout-addWidget(labelLogTypes); layout-addWidget(m_checkBoxCsv); layout-addLayout(layoutDelimitedChar); layout-addWidget(m_checkBoxXml); layout-addWidget(m_checkBoxText); layout-addStretch(); } MyWidget::checkBoxCsv_Toggled(bool checked) { m_labelDelimiter-setVisible(checked); m_lineEditDelimiter-setVisible(checked); } I want m_labelDelimiter and m_lineEditDelimiter both to be initially invisible and I want their visibility to toggle with the state of m_checkBoxCsv. This code acheives the functionality I desire, but it doesn't seem to reserve space for the two initially hidden widgets. When I check the checkbox, they become visible, but everything is kind of scrunched to accomodate them. If I leave them initially visible, everything is laid out just the way I would like it. Is there any way to make the QVBoxLayout reserve space for these widgets even if they're initially invisible?

Read the article

Improve Efficiency in Array comparison in Ruby

- by user2985025

Hi I am working on Ruby /cucumber and have an requirement to develop a comparison module/program to compare two files. Below are the requirements The project is a migration project . Data from one application is moved to another Need to compare the data from the existing application against the new ones. Solution : I have developed a comparison engine in Ruby for the above requirement. a) Get the data, de duplicated and sorted from both the DB's b) Put the data in a text file with "||" as delimiter c) Use the key columns (number) that provides a unique record in the db to compare the two files For ex File1 has 1,2,3,4,5,6 and file2 has 1,2,3,4,5,7 and the columns 1,2,3,4,5 are key columns. I use these key columns and compare 6 and 7 which results in a fail. Issue : The major issue we are facing here is if the mismatches are more than 70% for 100,000 records or more the comparison time is large. If the mismatches are less than 40% then comparison time is ok. Diff and Diff -LCS will not work in this case because we need key columns to arrive at accurate data comparison between two applications. Is there any other method to efficiently reduce the time if the mismatches are more thatn 70% for 100,000 records or more. Thanks

Read the article

Is it necessary to var scope loop variables in CFScript?

- by Mel

When using CFML and CF9 I usually var scope my loop variables; in this case local.i, for example: <cfloop list="#this.list#" index="local.i"> <cfif Len(local.i) GT 10> // do something </cfif> </cfloop> I recently started converting some stuff into CFScript, and (to my disappointment I found out that there is no way to loop over a list in CFScript) I'm wondering if I should still var scope my loop variables, and how: for (i = 1; LTE ListLen(this.list); i = i + 1 ) { if (Len(ListGetAt(this.list, i) GT 10)) { // do something } } Should I be doing local.i = 1 and local.i = local.i + 1 istead of the sample code in my example? Is it necessary? EDIT: I should also ask if the CFScript form of my CFML loop is correct; I ask because I just noticed that my CFML loop uses a , (comma and space) for the delimiter argument, which seems non-existence in the CFScript version of the loop.

Read the article

PHP Form - Edit & Delete via Text File Db

- by Jax

hi, I pieced together the script below from various tutorials, examples, etc... Right now the script currently: Saves Id, Name, Url with a "|" delimiter to a text file Db like: 1|John|http://www.john.com| 2|Mark|http://www.mark.com| 3|Fred|http://www.fred.com| But I'm having a hard time trying to make the "UPDATE" and "DELETE" buttons work. Can someone please post code which will: let me update/save any changed data for that row (for UPDATE button) let me delete that row (for DELETE button) PLEASE copy n paste the code below and try for yourself. I would like to keep the output format of the script below too. thanks D- $file = "data.txt"; $name = $_POST['name']; $url = $_POST['url']; $data = file('data.txt'); $i = 1; foreach ($data as $line) { $line = explode('|', $line); $i++; } if (isset($_POST['submits'])) { $fp = fopen($file, "a+"); fwrite($fp, $i."|".$name."|".$url."|\n"); fclose($fp); } ? '); } ?

Read the article

JSON Array Created in PHP/MySQL incorrectly decoded using JQuery

- by Zak

I am attempting to make an AJAX call to a very small PHP script that should return me an array that could be echo'd and decoded using JQuery. Here is what I have: My PHP page called to by AJAX: $web_q=mysql_query("select * from sec_u_g where uid='$id' "); $rs = array(); while($rs[] = mysql_fetch_assoc($web_q)) { } print_r(json_encode($rs)); This outputs: [{"id":"3","uid":"39","gid":"16"},{"id":"4","uid":"39","gid":"4"},{"id":"5","uid":"39","gid":"5"},{"id":"6","uid":"39","gid":"6"},{"id":"7","uid":"39","gid":"7"},{"id":"8","uid":"39","gid":"8"},{"id":"9","uid":"39","gid":"9"},false] I don't understand the "false" at the end for one .. But then I send to to JQuery and use: $.each(json.result, function(i, object) { $.each(object, function(property, value) { alert(property + "=" + value); }); }); This just fails. I try to alert "result" by itself which is set by: $.post("get_ug.php",{id:txt},function(result){ }); My output alerts are as follows: 1) The key is '0' and the value is '[' 2) The key is '1' and the value is 'f' 3) The key is '2' and the value is 'a' 4) The key is '3' and the value is 'l' 5) The key is '4' and the value is 's' 6) The key is '5' and the value is 'e' 7) The key is '6' and the value is ']' 8) The key is '7' and the value is ' ' (<-- Yes the line break is there in the alert) I am exhausted from trying different ideas and scripts. Other than setting a delimiter myself and concatenating my own array and decoding it with a custom script, does anyone have any ideas?? Thank you!!

Read the article

MySQL error code:1329 in function

- by Sharad Sharma

DELIMITER // CREATE DEFINER=`root`@`localhost` FUNCTION `formatMovieNames`(lID int) RETURNS varchar(1000) CHARSET latin1 BEGIN DECLARE output varchar(1000); DECLARE done INT DEFAULT 0; declare a varchar(200); declare cur1 cursor for select fileName from swlp4_movie where movieID in (select movieID from lesson_movie_map where lessonID = lID order by lm_map_id); DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = 1; open cur1; read_loop: loop fetch cur1 into a; if done = 1 then leave read_loop; end if; set output = concat(output, 'movie:[',a,'] '); set output = substr(output, 0, length(@output)-5); end loop; close cur1; RETURN output; END// I have create this function and when I run it I do not get any output (select fileName from swlp4_movie where movieID in (select movieID from lesson_movie_map where lessonID = 24 order by lm_map_id)); brings correct result I am trying to get result as movie:['movieName']< br / movie:['movieName1'] and so on (had to change br tag, cause it was adding a line break) cant't figure out what I am doing wrong

Read the article

How could I eliminate the meter names with an 'x' after them?

- by Rose Comete

Hi I imported some Excel data into MatLab - it is a list of about 200 meter names with about 28 rows each, but the problem is that for each there is a duplicate for the other direction - with the same meter name with an 'x' after it. Does anyone have any ideas as to how I can eliminate these ones with an 'x' after wards? Attached is the part of my code that imports the data, but unfortunately I have not got enough points on this site yet to be allowed to upload data/photos x clear all fid=fopen('sue1.csv'); % Open the file sue1.csv and read it all and put it into an array data = textscan(fid,'%s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s %s','Delimiter',',','CollectOutput',1); fclose(fid) j = 1; k = 1; % j - turbine number, k - date number for i = 1:length(data{1,1}) % Run through all the data if strcmp(data{1,1}(i),'') == 0 meterold{j}(k,:) = data{1,1}(i,:); % if strcmp(data{1,1}(i),'MeterName') == 0 % nummeter{j}(k,:) = str2num(data{1,1}(i,3:end)); % end k = k + 1; else % These commands are followed in the strings match (empty line) k = 1; % Reset the day counter as we're back to the beginning j = j + 1; % Add one to the meter counter as we're now looking at % a new turbine end end

Read the article

need to clean malformed tags using regular expression

- by Brian

Looking to find the appropriate regular expression for the following conditions: I need to clean certain tags within free flowing text. For example, within the text I have two important tags: <2004:04:12 and . Unfortunately some of tags have missing "<" or "" delimiter. For example, some are as follows: 1) <2004:04:12 , I need this to be <2004:04:12> 2) 2004:04:12>, I need this to be <2004:04:12> 3) <John Doe , I need this to be <John Doe> I attempted to use the following for situation 1: String regex = "<\\d{4}-\\d{2}-\\d{2}\\w*{2}[^>]"; String output = content.replaceAll(regex,"$0>"); This did find all instances of "<2004:04:12" and the result was "<2004:04:12 ". However, I need to eliminate the space prior to the ending tag. Not sure this is the best way. Any suggestions. Thanks

Read the article

Need some ideas on how to acomplish this in Java (parsing strings)

- by Matt

Sorry I couldn't think of a better title, but thanks for reading! My ultimate goal is to read a .java file, parse it, and pull out every identifier. Then store them all in a list. Two preconditions are there are no comments in the file, and all identifiers are composed of letters only. Right now I can read the file, parse it by spaces, and store everything in a list. If anything in the list is a java reserved word, it is removed. Also, I remove any loose symbols that are not attached to anything (brackets and arithmetic symbols). Now I am left with a bunch of weird strings, but at least they have no spaces in them. I know I am going to have to re-parse everything with a . delimiter in order to pull out identifiers like System.out.print, but what about strings like this example: Logger.getLogger(MyHash.class.getName()).log(Level.SEVERE, After re-parsing by . I will be left with more crazy strings like: getLogger(MyHash getName()) log(Level SEVERE, How am I going to be able to pull out all the identifiers while leaving out all the trash? Just keep re-parsing by every symbol that could exist in java code? That seems rather lame and time consuming. I am not even sure if it would work completely. So, can you suggest a better way of doing this?

Read the article

parsing python to csv

- by user185955

I'm trying to download some game stats to do some analysis, only problem is each season the data their isn't 100% consistent. I grab the json file from the site, then wish to save it to a csv with the first line in the csv containing the heading for that column, so the heading would be essentially the key from the python data type. #!/usr/bin/env python import requests import json import csv base_url = 'http://www.afl.com.au/api/cfs/afl/' token_url = base_url + 'WMCTok' player_url = base_url + 'matchItems/round' def printPretty(data): print(json.dumps(data, sort_keys=True, indent=2, separators=(',', ': '))) session = requests.Session() # session makes it simple to use the token across the requests token = session.post(token_url).json()['token'] # get the token session.headers.update({'X-media-mis-token': token}) # set the token Season = 2014 Roundno = 4 if Roundno<10: strRoundno = '0'+str(Roundno) else: strRoundno = str(Roundno) # get some data (could easily be a for loop, might want to put in a delay using Sleep so that you don't get IP blocked) data = session.get(player_url + '/CD_R'+str(Season)+'014'+strRoundno) # print everything printPretty(data.json()) with open('stats_game_test.csv', 'w', newline='') as csvfile: spamwriter = csv.writer(csvfile, delimiter="'",quotechar='|', quoting=csv.QUOTE_ALL) for profile in data.json()['items']: spamwriter.writerow(['%s' %(profile)]) #for key in data.json().keys(): # print("key: %s , value: %s" % (key, data.json()[key])) The above code grabs the json and writes it to a csv, but it puts the key in each individual cell next to the value (eg 'venueId': 'CD_V190'), the key needs to be just across the first row as a heading. It gives me a csv file with data in the cells like this Column A B 'tempInCelsius': 17.0 'totalScore': 32 'tempInCelsius': 16.0 'totalScore': 28 What I want is the data like this tempInCelsius totalScore 17 32 16 28 As I mentioned up the top, the data isn't always consistent so if I define what fields to grab with spamwriter.writerow([profile['tempInCelsius'], profile['totalScore']]) then it will error out on certain data grabs. This is why I'm now trying the above method so it just grabs everything regardless of what data is there.

Read the article

whats wrong with strcpy()

- by blacktooth

What is wrong with strcpy() in this code? void process_filedata(char *filename) { void* content; const char * buffer; char * temp; char * row; char * col; int lsize,buflen,tmp,num_scan; //num_scan - number of characters scanned int m=0,p=0,d=0,j=0; //m - machine, p - phase, d- delimiter, j - job FILE *file_pointer = fopen("machinetimesnew.csv","r"); if(file_pointer == NULL) { error_flag = print_error("Error opening file"); if(error_flag) exit(1); } fseek(file_pointer, 0 ,SEEK_END); lsize = ftell(file_pointer); buflen = lsize; rewind(file_pointer); // content = (char*) malloc(sizeof(char)*lsize); fread(content,1,lsize,file_pointer); buffer = (const char*) content; strcpy(temp,buffer); row = strtok(temp,"\n"); ............... ............... I am getting a segmentation fault..

Read the article

How do I parse file paths separated by a space in a string?

- by user1130637

Background: I am working in Automator on a wrapper to a command line utility. I need a way to separate an arbitrary number of file paths delimited by a single space from a single string, so that I may remove all but the first file path to pass to the program. Example input string: /Users/bobby/diddy dum/ding.mp4 /Users/jimmy/gone mia/come back jimmy.mp3 ... Desired output: /Users/bobby/diddy dum/ding.mp4 Part of the problem is the inflexibility on the Automator end of things. I'm using an Automator action which returns unescaped POSIX filepaths delimited by a space (or comma). This is unfortunate because: 1. I cannot ensure file/folder names will not contain either a space or comma, and 2. the only inadmissible character in Mac OS X filenames (as far as I can tell) is :. There are options which allow me to enclose the file paths in double or single quotes, or angle brackets. The program itself accepts the argument of the aforementioned input string, so there must be a way of separating the paths. I just do not have a keen enough eye to see how to do it with sed or awk. At first I thought I'll just use sed to replace every [space]/ with [newline]/ and then trim all but the first line, but that leaves the loophole open for folders whose names end with a space. If I use the comma delimiter, the same happens, just for a comma instead. If I encapsulate in double or single quotation marks, I am opening another can of worms for filenames with those characters. The image/link is the relevant part of my Automator workflow. -- UPDATE -- I was able to achieve what I wanted in a rather roundabout way. It's hardly elegant but here is working generalized code: path="/Users/bobby/diddy dum/ding.mp4 /Users/jimmy/gone mia/come back jimmy.mp3" # using colon because it's an inadmissible Mac OS X # filename character, perfect for separating # also, unlike [space], multiple colons do not collapse IFS=: # replace all spaces with colons colpath=$(echo "$path" | sed 's/ /:/g') # place words from colon-ized file path into array # e.g. three spaces -> three colons -> two empty words j=1 for word in $colpath do filearray[$j]="$word" j=$j+1 done # reconstruct file path word by word # after each addition, check file existence # if non-existent, re-add lost [space] and continue until found name="" for seg in "${filearray[@]}" do name="$name$seg" if [[ -f "$name" ]] then echo "$name" break fi name="$name " done All this trouble because the default IFS doesn't count "emptiness" between the spaces as words, but rather collapses them all.

Read the article

Unable to use TweetDeck on Windows due to "Ooops, TweetDeck can't find your data" and "Sorry, Adobe

- by Matt

I'm running Adobe AIR 1.5.2 (latest) on Windows 7 (64-bit RTM) and downloaded TweetDeck 0.31.1 (latest). When I run TweetDeck I get the following errors: Ooops, TweetDeck can't find your data and Sorry, Adobe AIR has a problem running on this computer Other AIR applications install and run fine. I've uninstalled both TweetDeck and AIR and reinstalled. Following the uninstalls I've also removed all on-disk references to both TweetDeck and AIR, but no luck. UPDATE: Using Process Monitor I did a trace of Tweetdeck from the moment it launched until the first error occurred. I saw the following information in the output of the trace: 1 5:22:18.6522338 PM TweetDeck.exe 5580 CreateFile D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\??\d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS\TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak NAME INVALID Desired Access: Generic Write, Read Attributes, Disposition: OverwriteIf, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: N, ShareMode: Read, Write, AllocationSize: 0 In this trace output, Tweetdeck.exe is trying to create the file D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\??\d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS\TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak but the path specified is invalid. When looking at the path you can see that it is indeed an invalid path. First, there’s the “??” portion which doesn’t exist in the file system since the “?” is an invalid character in Windows/NTFS file systems. Additionally, looking at this path, it actually seems to be composed of two parts (is the "??" a delimiter?): Part 1: D:\ProgramData\Microsoft\Windows\Start Menu\Programs\rs\?? Part 2: d:\Use\myusername\AppData\Roaming\Adobe\AIR\ELS \TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1\PrivateEncryptedDatak (the problem here is that d:\Use... doesn’t even exist. What seems to be happening here is that Tweetdeck is looking for the user credentials (the “PrivateEncryptedDatak” file) but it’s looking in the wrong place, can’t find the file, and hence the error that Tweetdeck is giving (shown in the screenshot). I'm trying to determine how TweetDeck is getting this path. I searched the contents of all files on my hard disk hoping to find some TweetDeck or Adobe AIR configuration file containing this incorrect path, but I was unable to find anything. UPDATE: See Carl's comment regarding directory junctions and symbolic links under my accepted answer. This ended up being the problem. Edit by Gnoupi: People, the answer section is there to provide an actual ANSWER, not to say you have the same issue. It doesn't help anyone that you have the same problem. Eventually, if you think this is really worth mentioning, put it as a comment under the question. But simply, if what you want to add is not an answer to the question, then don't post it as an answer. This is not a forum, I recommend new users to read the FAQ: http://superuser.com/faq

Read the article

add a from to backup routine

- by Gerard Flynn

hi how do you put a process bar and button onto this code i have class and want to add a gui on to the code using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Text; using System.Windows.Forms; using System.Data.SqlClient; using System.IO; using System.Threading; using Tamir.SharpSsh; using System.Security.Cryptography; using ICSharpCode.SharpZipLib.Checksums; using ICSharpCode.SharpZipLib.Zip; using ICSharpCode.SharpZipLib.GZip; namespace backup { public partial class Form1 : Form { public Form1() { InitializeComponent(); } /// <summary> /// Summary description for Class1. /// </summary> public class Backup { private string dbName; private string dbUsername; private string dbPassword; private static string baseDir; private string backupName; private static bool isBackup; private string keyString; private string ivString; private string[] backupDirs = new string[0]; private string[] excludeDirs = new string[0]; private ZipOutputStream zipOutputStream; private string backupFile; private string zipFile; private string encryptedFile; static void Main() { Backup.Log("BackupUtility loaded"); try { new Backup(); if (!isBackup) MessageBox.Show("Restore complete"); } catch (Exception e) { Backup.Log(e.ToString()); if (!isBackup) MessageBox.Show("Error restoring!\r\n" + e.Message); } } private void LoadAppSettings() { this.backupName = System.Configuration.ConfigurationSettings.AppSettings["BackupName"].ToString(); this.dbName = System.Configuration.ConfigurationSettings.AppSettings["DBName"].ToString(); this.dbUsername = System.Configuration.ConfigurationSettings.AppSettings["DBUsername"].ToString(); this.dbPassword = System.Configuration.ConfigurationSettings.AppSettings["DBPassword"].ToString(); //default to using where we are executing this assembly from Backup.baseDir = System.Reflection.Assembly.GetExecutingAssembly().Location.Substring(0, System.Reflection.Assembly.GetExecutingAssembly().Location.LastIndexOf("\\")) + "\\"; Backup.isBackup = bool.Parse(System.Configuration.ConfigurationSettings.AppSettings["IsBackup"].ToString()); this.keyString = System.Configuration.ConfigurationSettings.AppSettings["KeyString"].ToString(); this.ivString = System.Configuration.ConfigurationSettings.AppSettings["IVString"].ToString(); this.backupDirs = GetSetting("BackupDirs", ','); this.excludeDirs = GetSetting("ExcludeDirs", ','); } private string[] GetSetting(string settingName, char delimiter) { if (System.Configuration.ConfigurationSettings.AppSettings[settingName] != null) { string settingVal = System.Configuration.ConfigurationSettings.AppSettings[settingName].ToString(); if (settingVal.Length > 0) return settingVal.Split(delimiter); } return new string[0]; } public Backup() { this.LoadAppSettings(); if (isBackup) this.DoBackup(); else this.DoRestore(); Log("Finished"); } private void DoRestore() { System.Windows.Forms.OpenFileDialog fileDialog = new System.Windows.Forms.OpenFileDialog(); fileDialog.Title = "Choose .encrypted file"; fileDialog.Filter = "Encrypted files (*.encrypted)|*.encrypted|All files (*.*)|*.*"; fileDialog.InitialDirectory = Backup.baseDir; if (fileDialog.ShowDialog() == System.Windows.Forms.DialogResult.OK) { //string encryptedFile = GetFileName("encrypted"); string encryptedFile = fileDialog.FileName; string decryptedFile = this.GetDecryptedFilename(encryptedFile); //string originalFile = GetFileName("original"); this.Decrypt(encryptedFile, decryptedFile); //this.UnzipFile(decryptedFile, originalFile); } } //use the same filename as the backup except replace ".encrypted" with ".decrypted.zip" private string GetDecryptedFilename(string encryptedFile) { string name = encryptedFile.Substring(0, encryptedFile.LastIndexOf(".")); name += ".decrypted.zip"; return name; } private void DoBackup() { this.backupFile = GetFileName("bak"); this.zipFile = GetFileName("zip"); this.encryptedFile = GetFileName("encrypted"); this.DeleteFiles(); this.zipOutputStream = new ZipOutputStream(File.Create(zipFile)); try { //backup database first if (this.dbName.Length > 0) { this.BackupDB(backupFile); this.ZipFile(backupFile, this.GetName(backupFile)); } //zip any directories specified in config file this.ZipUserSpecifiedFilesAndDirectories(this.backupDirs); } finally { this.zipOutputStream.Finish(); this.zipOutputStream.Close(); } this.Encrypt(zipFile, encryptedFile); this.SCPFile(encryptedFile); this.DeleteFiles(); } /// <summary> /// Deletes any files created by the backup process, namely the DB backup file, /// the zip of all files backuped up, and the encrypred zip file /// </summary> private void DeleteFiles() { File.Delete(this.backupFile); File.Delete(this.zipFile); ///File.Delete(this.encryptedFile); } private void ZipUserSpecifiedFilesAndDirectories(string[] fileNames) { foreach (string fileName in fileNames) { string name = fileName.Trim(); if (name.Length > 0) { Log("Zipping " + name); this.ZipFile(name, this.GetNameFromDir(name)); } } } private void SCPFile(string inputPath) { string sshServer = System.Configuration.ConfigurationSettings.AppSettings["SSHServer"].ToString(); string sshUsername = System.Configuration.ConfigurationSettings.AppSettings["SSHUsername"].ToString(); string sshPassword = System.Configuration.ConfigurationSettings.AppSettings["SSHPassword"].ToString(); if (sshServer.Length > 0 && sshUsername.Length > 0 && sshPassword.Length > 0) { Scp scp = new Scp(sshServer, sshUsername, sshPassword); //Copy a file from local machine to remote SSH server scp.Connect(); Log("Connected to " + sshServer); //scp.Put(inputPath, "/home/wal/temp.txt"); scp.Put(inputPath, GetName(inputPath)); scp.Close(); } else { Log("Not SCP as missing login details"); } } private string GetName(string inputPath) { FileInfo info = new FileInfo(inputPath); return info.Name; } private string GetNameFromDir(string inputPath) { DirectoryInfo info = new DirectoryInfo(inputPath); return info.Name; } private static void Log(string msg) { try { string toLog = DateTime.Now.ToString() + ": " + msg; System.Diagnostics.Debug.WriteLine(toLog); System.IO.FileStream fs = new System.IO.FileStream(baseDir + "app.log", System.IO.FileMode.OpenOrCreate, System.IO.FileAccess.ReadWrite); System.IO.StreamWriter m_streamWriter = new System.IO.StreamWriter(fs); m_streamWriter.BaseStream.Seek(0, System.IO.SeekOrigin.End); m_streamWriter.WriteLine(toLog); m_streamWriter.Flush(); m_streamWriter.Close(); fs.Close(); } catch (Exception e) { Console.WriteLine(e.ToString()); } } private byte[] GetFileBytes(string path) { FileStream stream = new FileStream(path, FileMode.Open); byte[] bytes = new byte[stream.Length]; stream.Read(bytes, 0, bytes.Length); stream.Close(); return bytes; } private void WriteFileBytes(byte[] bytes, string path) { FileStream stream = new FileStream(path, FileMode.Create); stream.Write(bytes, 0, bytes.Length); stream.Close(); } private void UnzipFile(string inputPath, string outputPath) { ZipInputStream zis = new ZipInputStream(File.OpenRead(inputPath)); ZipEntry theEntry = zis.GetNextEntry(); FileStream streamWriter = File.Create(outputPath); int size = 2048; byte[] data = new byte[2048]; while (true) { size = zis.Read(data, 0, data.Length); if (size > 0) { streamWriter.Write(data, 0, size); } else { break; } } streamWriter.Close(); zis.Close(); } private bool ExcludeDir(string dirName) { foreach (string excludeDir in this.excludeDirs) { if (dirName == excludeDir) return true; } return false; } private void ZipFile(string inputPath, string zipName) { FileAttributes fa = File.GetAttributes(inputPath); if ((fa & FileAttributes.Directory) != 0) { string dirName = zipName + "/"; ZipEntry entry1 = new ZipEntry(dirName); this.zipOutputStream.PutNextEntry(entry1); string[] subDirs = Directory.GetDirectories(inputPath); //create directories first foreach (string subDir in subDirs) { DirectoryInfo info = new DirectoryInfo(subDir); string name = info.Name; if (this.ExcludeDir(name)) Log("Excluding " + dirName + name); else this.ZipFile(subDir, dirName + name); } //then store files string[] fileNames = Directory.GetFiles(inputPath); foreach (string fileName in fileNames) { FileInfo info = new FileInfo(fileName); string name = info.Name; this.ZipFile(fileName, dirName + name); } } else { Crc32 crc = new Crc32(); this.zipOutputStream.SetLevel(6); // 0 - store only to 9 - means best compression FileStream fs = null; try { fs = File.OpenRead(inputPath); } catch (IOException ioEx) { Log("WARNING! " + ioEx.Message);//might be in use, skip file in this case } if (fs != null) { byte[] buffer = new byte[fs.Length]; fs.Read(buffer, 0, buffer.Length); ZipEntry entry = new ZipEntry(zipName); entry.DateTime = DateTime.Now; // set Size and the crc, because the information // about the size and crc should be stored in the header // if it is not set it is automatically written in the footer. // (in this case size == crc == -1 in the header) // Some ZIP programs have problems with zip files that don't store // the size and crc in the header. entry.Size = fs.Length; fs.Close(); crc.Reset(); crc.Update(buffer); entry.Crc = crc.Value; this.zipOutputStream.PutNextEntry(entry); this.zipOutputStream.Write(buffer, 0, buffer.Length); } } } private void Encrypt(string inputPath, string outputPath) { RijndaelManaged rijndaelManaged = new RijndaelManaged(); byte[] encrypted; byte[] toEncrypt; //Create a new key and initialization vector. //myRijndael.GenerateKey(); //myRijndael.GenerateIV(); /*des.GenerateKey(); des.GenerateIV(); string temp1 = Convert.ToBase64String(des.Key); string temp2 = Convert.ToBase64String(des.IV);*/ //Get the key and IV. byte[] key = Convert.FromBase64String(keyString); byte[] IV = Convert.FromBase64String(ivString); //Get an encryptor. ICryptoTransform encryptor = rijndaelManaged.CreateEncryptor(key, IV); //Encrypt the data. MemoryStream msEncrypt = new MemoryStream(); CryptoStream csEncrypt = new CryptoStream(msEncrypt, encryptor, CryptoStreamMode.Write); //Convert the data to a byte array. toEncrypt = this.GetFileBytes(inputPath); //Write all data to the crypto stream and flush it. csEncrypt.Write(toEncrypt, 0, toEncrypt.Length); csEncrypt.FlushFinalBlock(); //Get encrypted array of bytes. encrypted = msEncrypt.ToArray(); WriteFileBytes(encrypted, outputPath); } private void Decrypt(string inputPath, string outputPath) { RijndaelManaged myRijndael = new RijndaelManaged(); //DES des = new DESCryptoServiceProvider(); byte[] key = Convert.FromBase64String(keyString); byte[] IV = Convert.FromBase64String(ivString); byte[] encrypted = this.GetFileBytes(inputPath); byte[] fromEncrypt; //Get a decryptor that uses the same key and IV as the encryptor. ICryptoTransform decryptor = myRijndael.CreateDecryptor(key, IV); //Now decrypt the previously encrypted message using the decryptor // obtained in the above step. MemoryStream msDecrypt = new MemoryStream(encrypted); CryptoStream csDecrypt = new CryptoStream(msDecrypt, decryptor, CryptoStreamMode.Read); fromEncrypt = new byte[encrypted.Length]; //Read the data out of the crypto stream. int bytesRead = csDecrypt.Read(fromEncrypt, 0, fromEncrypt.Length); byte[] readBytes = new byte[bytesRead]; Array.Copy(fromEncrypt, 0, readBytes, 0, bytesRead); this.WriteFileBytes(readBytes, outputPath); } private string GetFileName(string extension) { return baseDir + backupName + "_" + DateTime.Now.ToString("yyyyMMdd") + "." + extension; } private void BackupDB(string backupPath) { string sql = @"DECLARE @Date VARCHAR(300), @Dir VARCHAR(4000) --Get today date SET @Date = CONVERT(VARCHAR, GETDATE(), 112) --Set the directory where the back up file is stored SET @Dir = '"; sql += backupPath; sql += @"' --create a 'device' to write to first EXEC sp_addumpdevice 'disk', 'temp_device', @Dir --now do the backup BACKUP DATABASE " + this.dbName; sql += @" TO temp_device WITH FORMAT --Drop the device EXEC sp_dropdevice 'temp_device' "; //Console.WriteLine("sql="+sql); Backup.Log("Starting backup of " + this.dbName); ExecuteSQL(sql); } /// <summary> /// Executes the specified SQL /// Returns true if no errors were encountered during execution /// </summary> /// <param name="procedureName"></param> private void ExecuteSQL(string sql) { SqlConnection conn = new SqlConnection(this.GetDBConnectString()); try { SqlCommand comm = new SqlCommand(sql, conn); conn.Open(); comm.ExecuteNonQuery(); } finally { conn.Close(); } } private string GetDBConnectString() { StringBuilder builder = new StringBuilder(); builder.Append("Data Source=127.0.0.1; User ID="); builder.Append(this.dbUsername); builder.Append("; Password="); builder.Append(this.dbPassword); builder.Append("; Initial Catalog="); builder.Append(this.dbName); builder.Append(";Connect Timeout=30"); return builder.ToString(); } } } }

Read the article

Working with Reporting Services Filters–Part 1

- by smisner

There are two ways that you can filter data in Reporting Services. The first way, which usually provides a faster performance, is to use query parameters to apply a filter using the WHERE clause in a SQL statement. In that case, the structure of the filter depends upon the syntax recognized by the source database. Another way to filter data in Reporting Services is to apply a filter to a dataset, data region, or a group. Using this latter method, you can even apply multiple filters. However, the use of filter operators or the setup of multiple filters is not always obvious, so in this series of posts, I'll provide some more information about the configuration of filters. First, why not use query parameters exclusively for filtering? Here are a few reasons: You might want to apply a filter to part of the report, but not all of the report. Your dataset might retrieve data from a stored procedure, and doesn't allow you to pass a query parameter for filtering purposes. Your report might be set up as a snapshot on the report server and, in that case, cannot be dynamically filtered based on a query parameter. Next, let's look at how to set up a report filter in general. The process is the same whether you are applying the filter to a dataset, data region, or a group. When you go to the Filters page in the Properties dialog box for whichever of these items you selected (dataset, data region, group), you click the Add button to create a new filter. The interface looks like this: The Expression field is usually a field in the dataset, so to make it easier for you to make a selection,the drop-down list displays all of the current dataset fields. But notice the expression button to the right, which means that you can set up any type of expression-not just a dataset field. To the right of the expression button, you'll find a data type drop-down list. It's important to specify the correct data type for the field or expression you're using. Now for the operators. Here's a list of the options that you have: This Operator Performs This Action =, <>, >, >=, <, <=, Like Compares expression to value Top N, Bottom N Compares expression to Top (Bottom) set of N values (N = integer) Top %, Bottom % Compares expression to Top (Bottom) N percent of values (N = integer or float) Between Determines whether expression is between two values, inclusive In Determines whether expression is found in list of values Last, the Value is what you're comparing to the expression using the operator. The construction of a filter using some operators (=, <>, >, etc.) is fairly simple. If my dataset (for AdventureWorks data) has a Category field, and I have a parameter that prompts the user for a single category, I can set up a filter like this: Expression Data Type Operator Value [Category] Text = [@Category] But if I set the parameter to accept multiple values, I need to change the operator from = to In, just as I would have to do if I were using a query parameter. The parameter expression, [@Category], which translates to =Parameters!Category.Value, doesn’t need to change because it represents an array as soon as I change the parameter to allow multiple values. The “In” operator requires an array. With that in mind, let’s consider a variation on Value. Let’s say that I have a parameter that prompts the user for a particular year – and for simplicity’s sake, this parameter only allows a single value, and I have an expression that evaluates the previous year based on the user’s selection. Then I want to use these two values in two separate filters with an OR condition. That is, I want to filter either by the year selected OR by the year that was computed. If I create two filters, one for each year (as shown below), then the report will only display results if BOTH filter conditions are met – which would never be true. Expression Data Type Operator Value [CalendarYear] Integer = [@Year] [CalendarYear] Integer = =Parameters!Year.Value-1 To handle this scenario, we need to create a single filter that uses the “In” operator, and then set up the Value expression as an array. To create an array, we use the Split function after creating a string that concatenates the two values (highlighted in yellow) as shown below. Expression Data Type Operator Value =Cstr(Fields!CalendarYear.Value) Text In =Split( CStr(Parameters!Year.Value) + ”,” + CStr(Parameters!Year.Value-1) , “,”) Note that in this case, I had to apply a string conversion on the year integer so that I could concatenate the parameter selection with the calculated year. Pay attention to the second argument of the Split function—you must use a comma delimiter for the result to work correctly with the In operator. I also had to change the Expression value from [CalendarYear] (or =Fields!CalendarYear.Value) so that the expression would return a string that I could compare with the values in the string array. More fun with filter expressions in future posts!

Read the article

What's New In 11.1.2.1 (Talleyrand SP1)

- by russ.bishop

This release is primarily about bug fixes and that's what we spent the most time on, but we also addressed a number of other things: 1. Performance improvements We've done a lot of work to improve the performance of page load and execution times. For example, the View Compare page is about half the size it was previously! We've also done a lot of work on the server to improve performance of queries, exports, action scripts, etc. We implemented some finer-grained locking so fewer operations will block other users while they are in progress. We made some optimizations to improve performance when you have a lot of network or database latency as well. Just a few examples: An Import that previously took 8 GB of memory and hours to complete now runs in about 30 minutes and never takes more than 1 GB of RAM. Searching by exact Node Name now completes within 2 seconds even for a hierarchy with millions of nodes. Another search that was taking 30 seconds to run now completes in less than 5 seconds. 2. Upgrade support This release supports automatic upgrade from previous releases, built right into the console. 3. Console Improvements The Console has been reorganized and made easier to use. It is also much more multi-threaded so it responds quicker without freezing up when you save changes or when it needs to get status. 4. Property Namespaces Properties now have a concept called a Namespace. This is tied into the Application Templates to prevent conflicts with duplicate property names. Right now, if you have an AccountType and you pull in the HFM template, it also has AccountType so you end up creating properties with decorations on the name like "Account Type (HFM)". This is no longer necessary. In addition, properties within a namespace must have unique labels but they can be duplicated across namespaces. So in the Property Grid when you click on the HFM category, you just see "AccountType". When you click on MyCategory, you see "AccountType", but they are different properties with different values. Within formulas, the names are still unique (eg: Custom.AccountType vs HFM.AccountType). I'll write more about this one later. 5. Single Sign On DRM now supports Single Sign-On via HSS. For example, if you are using Oracle's OAM as your SSO solution then you configure HSS to use OAM just like you would before. You also configure DRM to use HSS, again just like before. Then you configure OAM to protect the DRM web app, like you would any other website. However once you do those things, users are no longer prompted to enter their username/password. They simply get redirected to OAM if they don't already have a login token, otherwise they pick their application and sail right into DRM. You can also avoid having to pick an application (see the next item) 6. URL-based navigation You can now specify the application you want to log into via the URL. Combined with SSO and your Intranet, it becomes easy to provide links on our intranet portal that take users directly into a specific DRM application. We also support specifying the Version, Hierarchy, and Node. Again, this can be used on your internal portal, but the scenarios get even more interesting when you are using workflow like Oracle BPEL you can automatically generate links within emails that will take users directly to a specific node in the UI. 7. Job status and cancellation A lot of the jobs now report their status and support true cancellation. Action Scripts also report a progress complete percentage since the amount of work is known ahead of time. 8. Action Script Options Action scripts support Option declarations at the top of the file so a script can self-describe (when specified in the file, the corresponding item in the file is ignored). For example: Option|DetectDelimiter Option|UsePropertyNames|true This will tell DRM to automatically detect the delimiter (a pipe symbol in this case) and that all references to properties are by Name, not by Label. Note that when you load a script in the UI, if you use Labels we automatically try to match them up if they are unique. Any duplicates are indicated and you are presented with a choice to pick which property you actually referred to. This is somewhat similar to Version substitution, but tailored for properties. There are other more minor changes and like I said earlier a lot of bug fixes and performance improvements. Hopefully I will get a chance to dig into some of these things in future blog posts.

Read the article

How do I copy all referenced jars of an eclipse project using ant4eclipse?

- by interstellar

I've tried like this (link): <taskdef resource="net/sf/antcontrib/antlib.xml" /> <taskdef resource="net/sf/ant4eclipse/antlib.xml" /> <target name="copy_jars"> <getEclipseClasspath workspace="${basedir}/.." projectname="MyProject" property="classpath" relative="false" runtime="true" pathseparator="#" />  <foreach list="${classpath}" delimiter="#" target="copy_jar_file" param="classpath.entry" /> </target> <target name="copy_jar_file">  <if> <isfileselected file="${classpath.entry}"> <filename name="**/*.jar" /> </isfileselected> <then>  <copy file="${classpath.entry}" tofile="${dest.dir}"/> </then> </if> </target> But I get the exception: [getEclipseClasspath] net.sf.ant4eclipse.model.FileParserException: Could not parse plugin project 'E:\...\MyProject' since it contains neither a Bundle-Manifest nor a plugin.xml! [getEclipseClasspath] at net.sf.ant4eclipse.model.pdesupport.plugin.PluginDescriptorParser.parseEclipseProject(Unknown Source) [getEclipseClasspath] at net.sf.ant4eclipse.model.pdesupport.plugin.PluginProjectRoleIdentifier.applyRole(Unknown Source) [getEclipseClasspath] at net.sf.ant4eclipse.model.roles.RoleIdentifierRegistry.applyRoles(Unknown Source) [getEclipseClasspath] at net.sf.ant4eclipse.tools.ProjectFactory.readProjectFromWorkspace(Unknown Source) [getEclipseClasspath] at net.sf.ant4eclipse.tools.resolver.AbstractClasspathResolver.resolveEclipseClasspathEntry(Unknown Source) [getEclipseClasspath] at net.sf.ant4eclipse.tools.resolver.AbstractClasspathResolver.resolveProjectClasspath(Unknown Source) [getEclipseClasspath] at net.sf.ant4eclipse.tools.resolver.ProjectClasspathResolver.resolveProjectClasspath(Unknown Source) [getEclipseClasspath] at net.sf.ant4eclipse.ant.task.project.GetEclipseClassPathTask.resolvePath(Unknown Source) [getEclipseClasspath] at net.sf.ant4eclipse.ant.task.project.AbstractGetProjectPathTask.execute(Unknown Source) [getEclipseClasspath] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288) [getEclipseClasspath] at sun.reflect.GeneratedMethodAccessor1.invoke(Unknown Source) [getEclipseClasspath] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) [getEclipseClasspath] at java.lang.reflect.Method.invoke(Method.java:597) [getEclipseClasspath] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105) [getEclipseClasspath] at org.apache.tools.ant.Task.perform(Task.java:348) [getEclipseClasspath] at org.apache.tools.ant.Target.execute(Target.java:357) [getEclipseClasspath] at org.apache.tools.ant.Target.performTasks(Target.java:385) [getEclipseClasspath] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329) [getEclipseClasspath] at org.apache.tools.ant.Project.executeTarget(Project.java:1298) [getEclipseClasspath] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41) [getEclipseClasspath] at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32) [getEclipseClasspath] at org.apache.tools.ant.Project.executeTargets(Project.java:1181) [getEclipseClasspath] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423) [getEclipseClasspath] at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137) BUILD FAILED E:\...\build.xml:132: Exception whilst resolving the classpath of project MyProject! Reason: Could not parse plugin project 'E:\...\MyProject' since it contains neither a Bundle-Manifest nor a plugin.xml! I wan't to copy just the jars, not the referenced projects. Is there a way to parametrize the task getEclipseClasspath so it only gets the jars, not the projects?

Read the article

Performance of tokenizing CSS in PHP

- by Boldewyn

This is a noob question from someone who hasn't written a parser/lexer ever before. I'm writing a tokenizer/parser for CSS in PHP (please don't repeat with 'OMG, why in PHP?'). The syntax is written down by the W3C neatly here (CSS2.1) and here (CSS3, draft). It's a list of 21 possible tokens, that all (but two) cannot be represented as static strings. My current approach is to loop through an array containing the 21 patterns over and over again, do an if (preg_match()) and reduce the source string match by match. In principle this works really good. However, for a 1000 lines CSS string this takes something between 2 and 8 seconds, which is too much for my project. Now I'm banging my head how other parsers tokenize and parse CSS in fractions of seconds. OK, C is always faster than PHP, but nonetheless, are there any obvious D'Oh! s that I fell into? I made some optimizations, like checking for '@', '#' or '"' as the first char of the remaining string and applying only the relevant regexp then, but this hadn't brought any great performance boosts. My code (snippet) so far: $TOKENS = array( 'IDENT' => '...regexp...', 'ATKEYWORD' => '@...regexp...', 'String' => '"...regexp..."|\'...regexp...\'', //... ); $string = '...CSS source string...'; $stream = array(); // we reduce $string token by token while ($string != '') { $string = ltrim($string, " \t\r\n\f"); // unconsumed whitespace at the // start is insignificant but doing a trim reduces exec time by 25% $matches = array(); // loop through all possible tokens foreach ($TOKENS as $t => $p) { // The '&' is used as delimiter, because it isn't used anywhere in // the token regexps if (preg_match('&^'.$p.'&Su', $string, $matches)) { $stream[] = array($t, $matches[0]); $string = substr($string, strlen($matches[0])); // Yay! We found one that matches! continue 2; } } // if we come here, we have a syntax error and handle it somehow } // result: an array $stream consisting of arrays with // 0 => type of token // 1 => token content

Read the article

Adding objects to an NSMutableArray, order seems odd when parsing from an XML file

- by diatrevolo

Hello: I am parsing an XML file for two elements: "title" and "noType". Once these are parsed, I am adding them to an object called aMaster, an instance of my own Master class that contains NSString variables. I am then adding these instances to an NSMutableArray on a singleton, in order to call them elsewhere in the program. The problem is that when I call them, they don't seem to be on the same NSMutableArray index... each index contains either the title OR the noType element, when it should be both... can anyone see what I may be doing wrong? Below is the code for the parser. Thanks so much!! #import "XMLParser.h" #import "Values.h" #import "Listing.h" #import "Master.h" @implementation XMLParser @synthesize sharedSingleton, aMaster; - (XMLParser *) initXMLParser { [super init]; sharedSingleton = [Values sharedValues]; aMaster = [[Master init] alloc]; return self; } - (void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qualifiedName attributes:(NSDictionary *)attributeDict { aMaster = [[Master alloc] init]; //Extract the attribute here. if ([elementName isEqualToString:@"intro"]) { aMaster.intro = [attributeDict objectForKey:@"enabled"]; } else if ([elementName isEqualToString:@"item"]) { aMaster.item_type = [attributeDict objectForKey:@"type"]; //NSLog(@"Did find item with type %@", [attributeDict objectForKey:@"type"]); //NSLog(@"Reading id value :%@", aMaster.item_type); } else { //NSLog(@"No known elements"); } //NSLog(@"Processing Element: %@", elementName); //HERE } - (void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string { if(!currentElementValue) currentElementValue = [[NSMutableString alloc] initWithString:string]; else { [currentElementValue appendString:string];//[tempString stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]]; CFStringTrimWhitespace((CFMutableStringRef)currentElementValue); } } - (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName { if ([elementName isEqualToString:@"item"]) { [sharedSingleton.master addObject:aMaster]; NSLog(@"Added %@ and %@ to the shared singleton", aMaster.title, aMaster.noType); //Only having one at a time added... don't know why [aMaster release]; aMaster = nil; } else if ([elementName isEqualToString:@"title"]) { [aMaster setValue:currentElementValue forKey:@"title"]; } else if ([elementName isEqualToString:@"noType"]) { [aMaster setValue:currentElementValue forKey:@"noType"]; //NSLog(@"%@ should load into the singleton", aMaster.noType); } NSLog(@"delimiter"); NSLog(@"%@ should load into the singleton", aMaster.title); NSLog(@"%@ should load into the singleton", aMaster.noType); [currentElementValue release]; currentElementValue = nil; } - (void) dealloc { [aMaster release]; [currentElementValue release]; [super dealloc]; } @end

Read the article

Read variable-length records from a buffer - weird memory issues

- by bsg

Hi, I'm trying to implement an i/o intensive quicksort (C++ qsort) on a very large dataset. In the interests of speed, I'd like to read in a chunk of data at a time into a buffer and then use qsort to sort it inside the buffer. (I am currently working with text files but would like to move to binary soon.) However, my data is composed of variable-length records, and qsort needs to be told the length of the record in order to sort. Is there any way to standardize this? The only thing I could think of was rather convoluted: my program currently reads from the buffer until it hits a linefeed character ('10' in ascii), transferring each character over to another array. When it finds a linefeed (the delimiter in the input file), it fills the number of spaces remaining in the buffer for that record (record size is set to 30) with null characters. This way, I should end up with a buffer full of fixed-size records to give qsort. I know there are several problems with my approach, one being that it's just clumsy, another that the record size might conceivably be larger than 30, but is generally much less. Is there a better way of doing this? As well, my current code doesn't even work. When I debug it, it seems to be transferring characters from one buffer to the other, but when I try to print out the buffer, it contains only the first record. Here is my code: FILE *fp; unsigned char *buff; unsigned char *realbuff; FILE *inputFiles[NUM_INPUT_FILES]; buff = (unsigned char *) malloc(2048); realbuff = (unsigned char *) malloc(NUM_RECORDS * RECORD_SIZE); fp = fopen("postings0.txt", "r"); if(fp) { fread(buff, 1, 2048, fp); /*for(int i=0; i <30; i++) cout << buff[i] <<endl;*/ int y=0; int recordcounter = 0; //cout << buff; for(int i=0;i <100; i++) { if(buff[i] != char(10)) { realbuff[y] = buff[i]; y++; recordcounter++; } else { if(recordcounter < RECORD_SIZE) for(int j=recordcounter; j < RECORD_SIZE;j++) { realbuff[y] = char(0); y++; } recordcounter = 0; } } cout << realbuff <<endl; cout << buff; } else cout << "sorry"; Thank you very much, bsg

Read the article

php array code with regular expressions

- by user551068

there are few mistakes which it is showing as Warning: preg_match() [function.preg-match]: Delimiter must not be alphanumeric or backslash in array 4,9,10,11,12... can anyone resolve them <?PHP $hosts = array( array("ronmexico.kainalopallo.com/","beforename=$F_firstname%20$F_lastname&gender=$F_gender","Your Ron Mexico Name is ","/the ultimate disguise, is ([^<]+)<\/b><\/u>/s"), array("www.fjordstone.com/cgi-bin/png.pl","gender=$F_gender&submit=Name%20Me","Your Pagan name is ","/COLOR=#000000 SIZE=6> *([^<]*)<\/FONT>/"), array("rumandmonkey.com/widgets/toys/mormon/index.php","gender=$F_gender&firstname=$F_firstname&surname=$F_lastname","Your Mormon Name is ","/My Mormon name is ([^<]+)<\/b>! /s"), array("cyborg.namedecoder.com/index.php","acronym=$F_firstname&design=edox&design_click-edox.x=0&design_click-edox.y=0&design_click-edox=edo","","Your Cyborg Name is ","/([^<]+)<\/p>/"), array("rumandmonkey.com/widgets/toys/namegen/10/","nametype=$brit&page=2&id=10&submit=God%20save%20the%20Queen!&name=$F_firstname%20$F_lastname","Your Very British Name is ","/My very British name is \&lt\;b\>([^&]+)\<\/b\>\.\<br/"), array("blazonry.com/name_generator/usname.php","realname=$F_firstname+$F_lastname&gender=$F_gender","Your U.S. Name is ","/also be known as ([^<]+)<\/b>/s"), array("www.spacepirate.org/rogues.php","realname=$F_firstname%20$F_lastname&formentered=Yes&submit=Arrrgh","Your Space Pirate name is ","/Your pirate name is ([^<]+)<\/b><\/font>/s"), array("rumandmonkey.com/widgets/toys/ghetto/","firstname=$F_firstname&lastname=$F_lastname","Your Ghetto Name is ","/\s* \s*([^<]*) /"), array("www.emmadavies.net/vampire/default.aspx","mf=$emgender&firstname=$F_firstname&lastname=$F_lastname&submit=Find+My+Vampire+Name","","Your Vampire Name is ","/([^<]*)<\/i>/"), array("www.emmadavies.net/fairy/default.aspx","mf=$emgender&firstname=$F_firstname&lastname=$F_lastname&submit=Seek+Fairy","","Your Fairy Name is ","/([^<]*)<\/i>/"), array("www.irielion.com/israel/reggaename.html","phase=3&oldname=$F_firstname%20$F_lastname&gndr=$reggender","","Your Rasta Name is ","/Yes I, your irie new name is ([^\n]*)\n/"), array("www.ninjaburger.com/fun/games/ninjaname/ninjaname.php","realname=$F_firstname+$F_lastname","Your Ninja Burger Name is ","/ Ninja Burger ninja name will be ([^<]*)<\/FONT>/"), array("gangstaname.com/pirate_name.php","sex=$F_gender&name=$F_firstname+$F_lastname","Your Pirate Name is ","/We\'ll now call ye:<\/strong><\/p> *<h2 class=\"newName\">([^<]*)<\/h2>/"), array("www.xach.com/nerd-name/","name=$F_firstname+$F_lastname&gender=$F_gender","Your Nerd Name is ","/<div align=center class=\"nerdname\">([^<]*)<\/div>/"), array("rumandmonkey.com/widgets/toys/namegen/5941/","page=2&id=5941&nametype=$dj&name=$F_firstname+$F_lastname","Your DJ Name is ","/My disk spinnin nu name is &lt\;b&gt\;([^<]*)&lt\;\/b&gt\;\./"), array("pizza.sandwich.net/poke/pokecgi.cgi","name=$F_firstname%20$F_lastname&color=black&submit=%20send%20","Your Pokename is ","/Your Pokéname is: <h1>([^<]*)<\/h1>/") ); return $hosts; ?>

Read the article

File sizing issue in DOS/FAT

- by Heather

I've been tasked with writing a data collection program for a Unitech HT630, which runs a proprietary DOS operating system that can run executables compiled for 16-bit MS DOS with some restrictions. I'm using the Digital Mars C/C++ compiler, which is working well thus far. One of the application requirements is that the data file must be human-readable plain text, meaning the file can be imported into Excel or opened by Notepad. I'm using a variable length record format much like CSV that I've successfully implemented using the C standard library file I/O functions. When saving a record, I have to calculate whether the updated record is larger or smaller than the version of the record currently in the data file. If larger, I first shift all records immediately after the current record forward by the size difference calculated before saving the updated record. EOF is extended automatically by the OS to accommodate the extra data. If smaller, I shift all records backwards by my calculated offset. This is working well, however I have found no way to modify the EOF marker or file size to ignore the data after the end of the last record. Most of the time records will grow in size because the data collection program will be filling some of the empty fields with data when saving a record. Records will only shrink in size when a correction is made on an existing entry, or on a normal record save if the descriptive data in the record is longer than what the program reads in memory. In the situation of a shrinking record, after the last record in the file I'm left with whatever data was sitting there before the shift. I have been writing an EOF delimiter into the file after a "shrinking record save" to signal where the end of my records are and space-filling the remaining data, but then I no longer have a clean file until a "growing record save" extends the size of the file over the space-filled area. The truncate() function in unistd.h does not work (I'm now thinking this is for *nix flavors only?). One proposed solution I've seen involves creating a second file and writing all the data you wish to save into that file, and then deleting the original. Since I only have 4MB worth of disk space to use, this works if the file size is less than 2MB minus the size of my program executable and configuration files, but would fail otherwise. It is very likely that when this goes into production, users would end up with a file exceeding 2MB in size. I've looked at Ralph Brown's Interrupt List and the interrupt reference in IBM PC Assembly Language and Programming and I can't seem to find anything to update the file size or similar. Is reducing a file's size without creating a second file even possible in DOS?

Read the article

How to implement a tagging plugin for jQuery

- by anxiety

Goal: To implement a jQuery plugin for my rails app (or write one myself, if necessary) that creates a "box" around text after a delimiter is typed. Example: With tagging on SO, the user begins typing a tag, then selects one from the drop-down list provided. The input field recognizes that a tag has been selected, puts a space and then is ready for the next tag. Similarly, I am attempting to use this plugin to put a box around the previously entered tag before moving to to accept the next tag/input. The instructions in the README.txt seem simple enough, however I have been receiving a $(".tagbox").tagbox is not a function error when debugging my app with firebug. Here is what I have in my application.js: $(document).ready( function(){ $('.tagbox').tagbox({ separator: /\[,]/, // specifying comma separation for <code>tags</code> }); }); And here is my _form.html.erb: <% form_for @tag do |f| %> <%= f.error_messages %> <%= f.label :name %> <%= text_field :tag, :name, { :method => :get, :class => "tagbox" } %> <%= f.submit "Submit" %> <% end %> I have omitted some other code (namely the implementation of an autocomplete plugin) existing within my _form.html.erb and application.js for sake of readability. The inclusion or exclusion of this omitted code does not affect the performance of this plugin. I have included all of the necessary files for the tagbox plugin (as well as application.js after all other included JS files) within the javascript_include_tag in my application.html.erb file. I'm pretty much confused as to why I'd be getting this "not a function" error when jquery.tagbox.js clearly defines the function and is included in the head of my html page in question. I've been struggling with this plugin for longer than I'd like to admit, so any help would really be appreciated. And, of course, I'm open to any other plugins or from-scratch suggestions you may have in mind.. This tagbox plugin does not seem to have a wealth of documentation or any currently working examples. Also to note, I'm trying to avoid using jrails. Thanks for your time

Search Results

Search found 409 results on 17 pages for 'delimiter'.

Page 15/17 | < Previous Page | 11 12 13 14 15 16 17 | Next Page >

- by Kylotan

- by shikhar

- by Skinniest Man

- by user2985025

- by Mel

- by Jax

- by Zak

- by Sharad Sharma

- by Rose Comete

- by Brian

- by Matt

- by user185955

- by blacktooth

- by user1130637

- by Matt

- by Gerard Flynn

- by smisner

- by russ.bishop

- by interstellar

- by Boldewyn

- by diatrevolo

- by bsg

- by user551068

- by Heather

- by anxiety

< Previous Page | 11 12 13 14 15 16 17 | Next Page >