Search Results

Search found 971 results on 39 pages for 'disconnect'.

Page 15/39 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• SpinRite and USB blues - does a solution exist?

  - by Peter Mortensen

  I use SpinRite to recover hard disks and their content, and to a lesser degree for preventive maintenance. However, if a USB drive (USB thumb drive and/or external hard disk with a USB interface) is connected when SpinRite scans for devices, then SpinRite never finishes/hangs. The work-around is of course to disconnect the drive, but there is value in being able to use SpinRite on USB drives. Some external drives have no screws and it is difficult to take out the hard disk without damaging the casing. And for those that have it would save the disassembling time. Is there a way to fix this problem (e.g. BIOS changes or a modified SpinRite boot CD) without resorting to floppy disks?

  Read the article

• Are there any 5.1 surround audio switches on the market?

  - by thepurplepixel

  (Somewhat related to this question) I have a set of Logitech 5.1 surround speakers, which use 3 stereo 3.5mm TRS connectors (minijacks) to transfer the audio (the typical green/black/orange audio outputs). I have a Griffin Firewave hooked up to my MacBook Pro, and my desktop has a Realtek ALC889 audio chipset. I have looked for a way to, essentially, switch the speaker inputs between my Firewave and my desktop without having to disconnect the cables from one, route them around my desk, and plug them into the other. I'd love to have something like an old Belkin DB-25/LPT switch, but for these audio cables. Of course, purchasing one and soldering my own cables on the connection terminals is always an option, but, is there a reasonably priced 5.1 audio switch (or 3x stereo) on the market that will accomplish the simple task of switching audio outputs between two computers into a set of 5.1 speakers? Thanks in advance!

  Read the article

• Double default gateway ubuntu server

  - by Elena

  I've just installed an Ubuntu server 9.10 on an EEEBox. This is my /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 192.168.48.16 netmask 255.255.248.0 wireless-essid mynet auto eth0 iface eth0 inet static address xx.xx.xx.xx netmask 255.255.255.224 gateway xx.xx.yy.yy When I restart /etc/init.d/networking, I can access the eth0 ip address from the internet and I can ping the machines in my wifi network mynet. Everything works fine and I have one default gateway. But after some time if I check again the route I just find two default gateways: one is correct and is the previous one, but the other is the one of the wifi network. I have a quite low signal of mynet where my server is and sometimes the wifi just disconnect and then reconnect again. Then I think that this can be a problem and the dhcp of the wifi net, when reconnecting it also add a default gateway. Any idea on how to resolve this issue?

  Read the article

• Virus disturbing my audio

  - by Mike M

  i had a desktop.ini virus on my computer. I managed to get rid of it (i think) but now my Mcafee firewall will not stay on for more than 3 secs before it turns off again. Also something is freezing my computer for a few secs when a window is open, also my audio goes in and out when watching videos and listening to music. I figured out that it only happens when i connect to the internet. I have to restart my PC and quickly disconnect the internet if i want to listen to music. also i have vista

  Read the article

• irc client with good logging/autoconnect/authorize upon connect capabilities

  - by ldigas

  I need an IRC client with good logging / autoconnect upon disconnect / authorize upon succesful connect capabilities. Simply, something that will sit in the background and record some channels so I can quickly reread them later. Windows XP platform. Is there something like that on the market ? I knew of one or two 'in the old days' (of ibm terminals :-), but nowadays, all I see are simple gui clients without even the basic features. I know of mIRC (with which I've had some problems with reconnecting after server drops). Anything better out there ? Just to clarify ... I'm not interested in a general irc client ... for that I have mIRC, with which I'm reasonably happy ... I just need something which is really good at the above mentioned three things.

  Read the article

• Two network cards in one Windows 7 PC

  - by Martin

  Hi, I've upgraded from Vista to Windows 7. On Vista I used to run one network card (Intel 82566DC -2 Gigabit) for my internet which was connected to a Dovado USB mobile broadband router connected to a 3G modem. The IP setup on the card is set on DHCP. The second card (3com Ethernet link) was used to connect to our town's local WUG (wireless user group) and all worked fine. Now the problem I have with Windows 7 is that when I connect to the internet with the (Intel) first card, the internet work fine but as soon as I connect the second card to the wug my internet drops. If I then disconnect the first card (internet one) and try to connect to the wug it works. It seems that the two cards are fighting each other. Is there maybe something I can do to fix the problem? As you probably can gather from this post is that I am not an expert on PC's so please if you do answer do I in simple terms. :) Thanks, Martin

  Read the article

• local cache for NAS or network folder

  - by HugoRune

  I am planning to build a network attached storage (NAS) server. Is there a way to cache frequently acccessed files from the remote storage automatically on the local PC? (I am not looking for a way to sync whole folders like rsync, but rather something that automatically and transparently caches the last accessed 50 gb of files.) Ideally I am searching for something that caches writes as well as reads, since only one pc will be accessing the server (and one day of lost changes if the local cache is damaged would be acceptable) I looked into windows offline files, but as far as I could tell this requires manual interaction to disconnect the server or go into offline mode in order to use the cache. The server would probably be running Linux or freeNAS, the pc runs Windows xp, but could be upgraded to 7 if required.

  Read the article

• Unable to sync the Zune software with my HTC HD7

  - by Varpi

  I have a brand new HTC HD7 with Windows Phone 7, with no Software installed. I am running on Windows 7 64 bit. Whenever I try to sync my Mobile Device with Zune- I get this message: Can't connect to your phone. Disconnect it, restart it, then try connecting again I've downloaded latest Zune software and all updates. I don't have any certificates on my personal certificates. My phone is listed under Portable devices in Device manager (It shows as phone with driver version 4.7.965.0). I've restarted both my computer and the mobile device few times. I tried unlocking the device during the Zune sync Any ideas as to how I can sync my phone ?

  Read the article

• how to pass traffic for port 80 not through openvpn?

  - by moti

  Is there a way to configure OpenVPN clients to route traffic for HTTP port 80 and HTTPS port 443 directly (i.e. not through the VPN), but through the regular default gateway the clients have. All other traffic should go through the VPN. My client is running OpenVPN on Windows and my current configuration looks like this: client dev tun proto tcp remote my-server-2 1194 resolv-retry infinite nobind persist-key persist-tun ca ../keys/ca.crt cert ../keys/client1.crt key ../keys/client1.key ns-cert-type server verb 3 route-metric 1 show-net-up dhcp-renew dhcp-release route-delay 0 120 hand-window 180 management localhost 13010 management-hold management-query-passwords management-forget-disconnect management-signal auth-user-pass

  Read the article

• Linux process management

  - by tanascius

  Hello, I started a long running background-process (dd with /etc/urandom) in my ssh console. Later I had to disconnect. When I logged in, again (this time directly, without ssh), the process still seemed to to run. I am not sure what happened - I did not use disown. When I logged in later, the process was not listed in top at first, but after a while it reclaimed a high CPU percentage, as I expected. So I assume dd is still running. Now, I'd like to see the progress. I use kill -USR1 <pid> but nothing is printed. Is there any way to get the output again?

  Read the article

• Problem with Lenovo x200s Wifi under Ubutu Karmic

  - by oneself

  Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

  Read the article

• Only one user at once through remote

  - by Lazlo

  Hi, This is probably an easy question for anyone used to servers, and I know I once managed to do it, but I don't remember how. I purchased a VPS and am able to connect correctly as Administrator, and can start, let's say, MyServer.exe. Problem is, if I connect as Administrator on another device, this process is still there, but I can't see it. What I want to do is limit the connection per user to 1, and disconnect others when one logs in. I know there was a simpler term, a simple way, but I truly don't remember. And since I'm not used to the vocabulary of servers, I couldn't find it in the S/F questions. Thanks in advance!

  Read the article

• Remote Desktop session on Windows Server 2003

  - by Dels

  I have some problem when I use Remote Desktop, here some description. I set some application to autorun each time Administrator (console) was login on W2K3 SP2 server I use Remote Desktop from XP SP3, using the same login as Administrator It creates a new session with the same username and the application starts autorun which make duplicity in application I just hoping i can enforce the Remote Desktop client to connect into only one session (console session), toying with Group Policy setting, successfully enforce the one session, but whenever i close remote desktop (disconnect) the console got disconnected too (which I didn't want it to behave like that). I also try some setting to limit connection, still it doesn't behave as I want it too. Simple i just want to use 1 session, but each time we close remote desktop the session still alive, much like when we use VNC solution (RealVNC, UltraVNC, TinyVNC etc.) Any solution(s)?

  Read the article

• ssh auto-forward?

  - by Jakobud

  I'm not sure if there is a specific name for this type of activity or not, but anyways: When a user ssh's into machine1, is there someway to force them to automatically ssh to machine2? For example, if user Bob ssh's into server1, can you set something up on server1 so that when Bob successfully logs in, he automatically ssh's to server2, so that he only has access to server2 and isn't really able to do anything on server1? Also, when he exits, it would disconnect him from server2 but also server1. Does that make sense? Is that possible?

  Read the article

• Linux and GeForce 8400 dual monitor

  - by Andrea Polci

  I'm trying to install a linux distribution on my PC. I have a GeForce 8400 GS with two connected monitors. I tried with Fedora 12 and Ubuntu 9.10 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on Ubuntu, it simply hangs up during the boot. With Fedora I get this error: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Do I need to install something else? (a driver for my video card for example).

  Read the article

• Utility to unmap a network drive when the screen saver starts

  - by JimR

  I'm looking for a way to unmap network drives when the screen saver turns on. I have a few users that share an external, encrypted drive (Samba share, not windows) and they have a requirement to disconnect the drive mapping when the local machine is idle. I'd also like it to warn them if there are open files on the mapped drive, if possible. There is also a requirement to force the password to be reentered before mapping when the machine comes back from idle. Is there a Windows setting or utility out there in the wild that meets these requirements?

  Read the article

• MP3 player no longer syncs after installing Sixaxis drivers

  - by zildjohn01

  I recently installed third-party drivers for the (Sony) PS3 controller on my friend's PC (Windows XP). I found out a few days later that his MP3 player (also Sony) is no longer recognized by Windows. He gets the "connect device" sound, and about 250ms later, the "disconnect device" sound. I figured the controller driver took over the Walkman's device ID, so I went through the registry and C:\Windows\inf removing all references to Sony's VID (054C), but I haven't had any luck. What would you do in this situation?

  Read the article

• Simple copy to pen-drive - 0x80070057

  - by yzraeu

  Hello guys, I have this problem for a while and still didn't find the answer. I'm copying a specifc 10mb file to my pen-drive, from any folder on PC to any folder on the pen-drive and all i get is this: 0x80070057 The parameter is incorrect I simply cannot copy the file at all!! The pen-drive in case is my Nokia 5800, in "Mass Storage" mode. Sometimes I cannot copy a single MP3 file, 5 or 7mb. So i have to disconnect and connect again. The source file is not corrupted, the destination works fine with other files. It's just with some files. If I change to another pen-drive, works fine.

  Read the article

• Windows 7 recognises the wrong router.

  - by Henry

  I have a cable router connected to my cable ISP. On the LANs are 4 computers, one of which is a dual boot XP/Win7 machine. I was given an ADSL wireless router which I connected to one of the LAN sockets on my cable router. I don't have an ADSL connection. All the machines connect correctly, some wirelessly, when my dual boot machine is in XP or off. However, when I go into Win 7 on that machine it finds the ADSL router and wants to connect through that (there's no ADSL connection) instead of my cable router and modem. I've turned DHCP off on the ADSL modem and even tried bridging its connections but neither of these have any effect. To get 7 connected, I have to either disconnect the ADSL router, or switch it off. Remember, the SAME computer on the same LAN works perfectly with the same router connected in XP! How then, can I get Win 7 to recognise the correct router?

  Read the article

• Problems with RDC into Win2008 Server

  - by Jason

  I'm having the same problem with a variety of new machines that I have built. When I RDC into the machine, the display does not update correctly. I get partial images, or refreshes only every 20-30 seconds. It is completely unusable. Eventually, it will even disconnect even though I am logged in. From RDCing into the machine, it looks like the machine is down, but it is fine. I can connect to it with an monitor and the problem is not visible. I think it is a problem with my network configuration. What should I look for to resolve this?

  Read the article

• HDD is not readable - can I fix this

  - by user1983017

  I have two HDD in my system, but today morning the additional hard disk is not readable. My all data are kept inside the additional HDD. When I disconnect the additional HDD from my system then system boot as usual, but when I connect HDD my system hangs Up in windows boot logo. Please note this problem is not related to HDD order. When I connect only the additional HDD then system shows this error: disk not readable press ctrl+alt+del to restart I can see the name of additional HDD in BIOS. When I connect both HDD i get a continues beep... beeep .. beep sound. Please tell me is my HDD gone dead ? How do I get the data back ? is there any kit for recovering HDD data ?

  Read the article

• Graphics card failure, anything I could try...

  - by ILMV

  My gaming PC has decided to die, it's not the first time but usually a quick ATX reset brings it back to life. Today it didn't. I disconnect all unessasary devices so I've only got the case button / LED cables, GPU, CPU, RAM and power connected, the computer still didn't turn on. I've not got a speaker on my motherboard so found a spare one I have for testing and when the machine starts up I get one long beep and two short beeps from my Award BIOS, which apparently means a video card error. I change it with the GPU from another machine and all works well. Q: So I have a faulty graphics card (an nVidia 8800GT OC), is there anything I can try to resurect it?

  Read the article

• Can't reconnect to my RDP session

  - by Jeremy Stein

  I use a VM through RDP. When I'm done for the day, I just disconnect the session and reconnect in the morning. That allows me to pick up what I was doing and not close all the applications. As I'm the only user, this generally works well. Today, I can't reconnect to my session from yesterday. When I RDP, I get a new session. When I run query user, I can see my other session: USERNAME SESSIONNAME ID STATE IDLE TIME LOGON TIME me rdp-tcp#82 1 Active 15:00 4/22/2010 9:00 AM me rdp-tcp#91 2 Active . 4/30/2010 9:00 AM If I try to use Terminal Services Manager to remote control the other session, I get this error: Session (ID 1) remote control failed (Error 7044 - The request to control another session remotely was denied. ) Is there any way to reconnect to this session, or do I need to just kill it?

  Read the article

• ssh agent forwarding with many identities

  - by Eddified

  I have setup ssh agent forwarding, and I know it works. I also have many keys setup in the agent. The problem is there are so many keys that I get: Received disconnect from XXX.XXX.XXX.XXX: 2: Too many authentication failures for bob The way around this is to use IdentitiesOnly=yes so that ssh will only send the identity you want it to for the specified host. I've also gotten this implemented and I know it works, without agent forwarding. Now, I'm trying to combine the two features. That is, I want to use agent forwarding, but also be able to specify which identity to use when connecting. Problem is, I can't figure out how to do this. So, I want to connect from box A through box B to box C. Box A has all of the identity files and the ssh agent running. I want to edit box A or B's ssh config file(s) to use a specific identity that exists in box A's agent (which is being forwarded).

  Read the article

• All nework interfaces hang for seconds while one interface goes up/down

  - by user3698377

  I am building a client/server application that uses several network interfaces in parallel for redundancy, and I have noticed that while one network interface goes down or goes up, the communication on other interfaces hangs for several seconds. I could reproduce this behavior without my application in a simple way: there are 2 interfaces available on computer 1 ( Ethernet and WiFi ) ping from computer 2 the IP address of the Ethernet connection of computer 1 disconnect the WiFi of computer 1 ping hangs for seconds, and then the packets are traveling again between the 2 computers. The hanging happens as well if I turn back on the WiFi connection on computer 1. It happens as well if I ping the WiFi IP, and turn off/on the Ethernet connection ( or unplug/plug the cable). I am using Linux Ubuntu 12.04 on both computers. Any ideas why is this happening, and if / how can it be avoided?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >