Search Results

Search found 22380 results on 896 pages for 'hard drive failure'.

Page 15/896 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • Which hard drive to buy?

    - by caymansoftware
    I have an HP fh607av laptop (dv7 cnd85123hk) and I'd like to replace the hard drive. Which hard drive can I buy? I've never bought or installed a hard drive before (but would like to try). Links would be appreciated!

    Read the article

  • One USB flash drive to rule them all

    - by Chris
    Yesterday I purchased a 32GB USB flash drive. I have a myrid of systems in my home, and would like to have one flash drive with setup files for all the various systems throughout the house. I kept the Fat 32 filesystem on the drive, as I figured that is probably the most universal. I then made the partition bootable using fdisk. I then copied the Windows 7 setup files to the drive. I then installed grub 2 (1.98) onto the drive using backtrack 5. I was then able to load the windows 7 setup / install from the flash drive on an older BIOS type motherboard. Now I would like to know how to get this to work on my MacBook Pro 8,2 with still retaining support for legacy computers. Is this possible, or is this just a pipe dream. I plan on getting OS X on the drive, gparted, and OS X86 on the drive when all is said and done. I've done various google searches but really haven't found a guide on how to setup a swiss army usb flash drive.

    Read the article

  • DVD-drive detected by BIOS and UEFI but not by Ubuntu 12.04

    - by user97591
    I have build a new tower containing; Asrock Z77 extreme4 (motherboard) Core i7 (processor) Hitachi LGE-DMGH 12 L (B) GH15F SATA (SATA DVD-drive) Problem is; BIOS and UEFI has no problems detecting the DVD-drive but it is not detected by Ubuntu 12.04. It is not present in /etc/fstab or /etc/mtab. Below is the contents of fstab and mtab. Thanks for all your help. fstab: # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=f007bc60-da4c-4f36-99a7-77083c5f3654 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=5d59949c-aed9-442a-877d-5abf1ccaadc3 none swap sw 0 0 mtab: /dev/sda1 / ext4 rw,errors=remount-ro 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 none /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/tom/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=tom 0 0

    Read the article

  • External drive hanging, load average through the roof

    - by Paul Tomblin
    I have an external USB drive, and I run an hourly rsync to it as a backup. This has been working fine for years. This weekend, I got two new 2Tb internal drives, and decided it was time to re-install Ubuntu from scratch to clear out all the old cruft. About once a day since the re-install, the backup script hangs hard, usually in the "rm -rf" I do before the rsync. By the time I notice the problem, my load average is in the stratosphere and climbing fast (one time, it was over 150), but anything that doesn't touch the drive seems to be running fine. One thing that I find suspicious is that something, I don't know what, is doing a "smartctl" and a "hdparm" command on the USB drive. I'm pretty sure smartctl isn't supposed to run on external drives. I can't figure out what's doing it, either. Here's part of ps auwwfx when it's hung: root 7310 0.0 0.0 4248 352 ? D 20:15 0:00 /sbin/hdparm -C /dev/sdd root 7808 0.0 0.0 17372 1632 ? D 20:15 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 8427 0.0 0.0 4248 356 ? D 20:20 0:00 /sbin/hdparm -C /dev/sdd root 8925 0.0 0.0 17372 1628 ? D 20:20 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 9529 0.0 0.0 4248 356 ? D 20:25 0:00 /sbin/hdparm -C /dev/sdd root 10026 0.0 0.0 17372 1628 ? D 20:25 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 10655 0.0 0.0 4248 356 ? D 20:30 0:00 /sbin/hdparm -C /dev/sdd root 11151 0.0 0.0 17372 1632 ? D 20:30 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 11774 0.0 0.0 4248 356 ? D 20:35 0:00 /sbin/hdparm -C /dev/sdd root 12271 0.0 0.0 17372 1628 ? D 20:35 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 12878 0.0 0.0 4248 352 ? D 20:40 0:00 /sbin/hdparm -C /dev/sdd root 13374 0.0 0.0 17372 1632 ? D 20:40 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 14011 0.0 0.0 4248 352 ? D 20:45 0:00 /sbin/hdparm -C /dev/sdd root 14507 0.0 0.0 17372 1628 ? D 20:45 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 15116 0.0 0.0 4248 352 ? D 20:50 0:00 /sbin/hdparm -C /dev/sdd root 15612 0.0 0.0 17372 1632 ? D 20:50 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 16223 0.0 0.0 4248 352 ? D 20:55 0:00 /sbin/hdparm -C /dev/sdd root 16734 0.0 0.0 17372 1632 ? D 20:55 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 17345 0.0 0.0 4248 352 ? D 21:00 0:00 /sbin/hdparm -C /dev/sdd root 17842 0.0 0.0 17372 1628 ? D 21:00 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 18463 0.0 0.0 4248 352 ? D 21:05 0:00 /sbin/hdparm -C /dev/sdd root 18960 0.0 0.0 17372 1628 ? D 21:05 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 19598 0.0 0.0 4248 356 ? D 21:10 0:00 /sbin/hdparm -C /dev/sdd root 20096 0.0 0.0 17372 1628 ? D 21:10 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 21280 0.0 0.0 4244 356 ? D 21:15 0:00 /sbin/hdparm -C /dev/sdd root 21784 0.0 0.0 17372 1632 ? D 21:15 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 22414 0.0 0.0 4244 356 ? D 21:20 0:00 /sbin/hdparm -C /dev/sdd root 22912 0.0 0.0 17372 1628 ? D 21:20 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 23541 0.0 0.0 4244 356 ? D 21:25 0:00 /sbin/hdparm -C /dev/sdd root 24038 0.0 0.0 17372 1632 ? D 21:25 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd root 24658 0.0 0.0 4244 356 ? D 21:30 0:00 /sbin/hdparm -C /dev/sdd root 25157 0.0 0.0 17372 1628 ? D 21:30 0:00 /usr/sbin/smartctl -a -n standby -A -i /dev/sdd Why is this happening, and how can I stop it?

    Read the article

  • Splitting a drive which has layout as mirrored and type as dynamic

    - by shiva
    I have a C drive/volume in my server with layout = mirror and type =dynamic and status as healthy(boot,pagefile,crashdump). I have some questions regarding this configuration: I think it is a raid configuration.Please correct me if I am wrong. I read that, mirroring is nothing but raid-1 configuration. All my software and OS is in this drive. I want my software to be in a separate drive, but I am not sure if I can create a separate drive from the above mentioned c drive. I want to know: a. If I can do it and how ?(using disk management) b. If this is a right approach ?

    Read the article

  • Windows 8.1 installation: Which drive is the F drive?

    - by sammyg
    I am doing a clean install of Windows 8.1 on an old PC. It was purchased as download from Microsoft Store and written to and booted from a USB flash drive. It went through all of these steps: Copying Windows Files Getting files ready for installation Installing features Installing updates Then at "Getting finished" I am stuck at this stupid dialog box. Please unplug the following external drive and click OK to restart your computer and finish installing Windows. F: How do I tell what physical drive this is? Can I drop to command prompt during installation? And is it safe to unplug it while powered on? There is no external hard drive connected, none that I can see. There is no USB or FireWire drive connected externally. I think it sees one of the internal drives as external... in some weird way?!

    Read the article

  • Writing to external drive runs out of space prematurely

    - by steve
    I have a USB 2.0, 500 GB HDD. I am writing a bunch of data to it, that I previously recovered from the drive. I have formatted the drive in exFAT, since the drive will be used with Windows and OSX. At first, I tried using Windows explorer to move the files over to the drive (about 160 GiB worth) but after copying about 30% of the data (according to TeraCopy), Windows Explorer reported the drive as out of space, and that it was completely full. WinDirStat only showed the size of data that had been copied over... Where did this extra space go? Why is there a 300+ GiB discrepancy between the usage reported by the files and what Explorer sees?

    Read the article

  • My new Xbox 360 drive doesn't show up

    - by RobbieGee
    I bought an Xbox 360 Arcade version a while ago and today I got a 120GB drive from a shop that had a closedown sale. I put the drive on the side as per the picture on the back side of the drive. When I go to settings and look at memory, it only finds the built in memory chip, not the harddrive. Am I doing it correct? I have almost never used my Xbox so I'm not sure if there's anything more to it. I don't think I fitted the drive wrong either, it seems pretty much impossible to do it wrong. The box came with only the drive, it doesn't have any transfer kit or the likes.

    Read the article

  • Drive still usable if Seatools reports errors?

    - by Rob
    I have a Seagate 3TB Expansion Desktop drive that was part of a Linux RAID 6 array that failed. I eventually did a zero fill both through Seagate DiscWizard and via Linux dd, neither reported errors. When I ran Seatools now, I got: Short DST - Started 5/31/2014 10:04:36 PM Short DST - Pass 5/31/2014 10:05:37 PM Long Generic - Started 5/31/2014 10:15:19 PM Bad LBA: 518242762 Not Repaired (whole bunch of bad LBAs ommited) Bad LBA: 518715255 Not Repaired Long Generic Aborted 6/1/2014 3:12:18 AM i.e. the short test passed, the long test failed. Unfortunately, the drive is out of warranty, so I can't just RMA it. But I hate tossing a drive that can still be used. So, my questions are: If the zero fill succeeded, and the short test passed, can I still use the whole drive? if not, since I'm using LVM on top of RAID, is there a way to tell either of these to just skip the bad area? If not the above, can I just create partitions before and after the part of the drive with the bad LBAs?

    Read the article

  • Problems with making a bootable USB Drive on a Mac

    - by Jason
    I am following this http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx to create a Bootable USB Drive for me Mac and this is the output I get on step 8. new-host:~ Jason$ sudo dd if=/Users/Jason/Desktop/ubuntu-12.04-desktop-amd64.dmg of=/dev/rdisk1s2 bs=1m dd: /dev/rdisk1s2: Invalid argument 691+1 records in 691+0 records out 724566016 bytes transferred in 164.544659 secs (4403461 bytes/sec) What should I do?

    Read the article

  • How to recover data from a failing hard drive?

    - by intuited
    An external 3½" HDD seems to be in danger of failing — it's making ticking sounds when idle. I've acquired a replacement drive, and want to know the best strategy to get the data off of the dubious drive with the best chance of saving as much as possible. There are some directories that are more important than others. However, I'm guessing that picking and choosing directories is going to reduce my chances of saving the whole thing. I would also have to mount it, dump a file listing, and then unmount it in order to be able to effectively prioritize directories. Adding in the fact that it's time-consuming to do this, I'm leaning away from this approach. I've considered just using dd, but I'm not sure how it would handle read errors or other problems that might prevent only certain parts of the data from being rescued, or which could be overcome with some retries, but not so many that they endanger other parts of the drive from being saved. I guess ideally it would do a single pass to get as much as possible and then go back to retry anything that was missed due to errors. Is it possible that copying more slowly — e.g. pausing every x MB/GB — would be better than just running the operation full tilt, for example to avoid any overheating issues? For the "where is your backup" crowd: this actually is my backup drive, but it also contains some non-critical and bulky stuff, like music, that aren't backups, i.e. aren't backed up. The drive has not exhibited any clear signs of failure other than this somewhat ominous sound. I did have to fsck a few errors recently — orphaned inodes, incorrect free blocks/inodes counts, inode bitmap differences, zero dtime on deleted inodes; about 20 errors in all. The filesystem of the partition is ext3.

    Read the article

  • Boot Ubuntu on USB flash drive in Mac OS X 10.4... and Ubuntu

    - by thetester
    I would like to create an OS-agnostic installation of Ubuntu on a flash drive, that boots under Ubuntu and under Mac OS X. Ideally the process would look like: Install Ubuntu 11.10 (or 12.04 if necessary) on a flash drive (from Ubuntu). Boot from flash drive (on PC) to modify files, etc. Plug drive into Mac with OS X 10.4, boot to Ubuntu from it, and use. I have an 8G flash drive. What is the sanest way to do this?

    Read the article

  • What precautions should I take when moving a hard drive from one computer to another?

    - by Colin Dean
    I'm planning to move a hard drive from one server machine to another. The hard drive is an IDE drive. The motherboards are different, as are the memory and such. In this instance, graphics isn't a problem because this is just Ubuntu Server. Are there any precautions I should take, or steps I can do beforehand, in order to make this go as smoothly as possible? I've of course already backed up /home directories and configurations in /etc and /var.

    Read the article

  • Universal Pen Drive Linux Will Not Burn IOS Ubuntu 13.10 To USB [duplicate]

    - by Nick
    This question already has an answer here: How to create a bootable USB stick? 4 answers Universal Pen Drive Linux will not let me burn the iso to my usb. Whenever I attempt it it says 'can not open file 'E:*where I put my downloads*\ubuntu-13.10-desktop-amd64.iso' as archive'. Any help please. I just want to move to ubuntu and hopefully never have to use windows again :D Please help me and walk me through this process.

    Read the article

  • Ubuntu not mounting brand-new external drive

    - by user245115
    I bought a brand new 3TB external drive for my birthday coming up, It's a WD My Book, it came as NTFS, and I'm trying to make it mount using a simple script on boot. (Not /etc/fstab, I ruined my comp. using that by accident and had to re-install, I'm instead having a script run in /etc/init.d) The thing is, it's under /dev/sdf and I want it to mount in /exhd, the script seems to run but it doesn't mount it, any help here?

    Read the article

  • How can I format my active hard drive to NTFS?

    - by Ghost
    Believe it or not, I'm not too happy with Ubuntu. Well, let me rephrase that. I like it, but the only thing I don't like about it is that it's too much of a hassle to get a game to work. I'm trying to install Windows 7 with a 4GB flash drive, but my error that comes up is that my hard drive I'm trying to install on is in ext4. I need to format it to read NTFS. I can't seem to find any topics on how to format an active hard drive. I found a topic that explains how to move Ubuntu to a new drive, but it's a bit confusing to me. Please help! (Please don't disregard this topic just because I want to go back to windows)

    Read the article

  • In a pinch, is it worthwhile to run a bootable USB drive for my primary PC for an extended period?

    - by jason
    My hard drive has crashed, and I won't be able to buy a new one for a month or two. I've got a 16GB USB 3.0 flash drive that I'd like to have running a persistent ubuntu or ubuntu gnome distro. While it's not the best solution, is it a solution, or is it just a good way to wear out a flash drive? I plan on mostly storing things in Google Drive, so other than wearing out the flash drive, are there any risks involved?

    Read the article

  • How to run a bootable USB drive as my primary PC for an extended period?

    - by jason
    My hard drive has crashed, and I won't be able to buy a new one for a month or two. I've got a 16GB USB 3.0 flash drive that I'd like to have running a persistent ubuntu or ubuntu gnome distro. While it's not the best solution, is it a solution, or is it just a good way to wear out a flash drive? I plan on mostly storing things in Google Drive, so other than wearing out the flash drive, are there any risks involved?

    Read the article

  • Software for RAID Failure Alerts?

    - by QF_Developer
    I have two 256 GB Samsung 840 Pro SSD disks in a RAID 1 array. I would like to receive a notification if one of the disks in the array fails. Can anybody recommend an application I can install on the server to fire an email if such an event occurs? Here are some additional specs: Supermicro X9SCM-IIF motherboard utilising the hardware RAID controller. OS = Windows 2012 Standard Also is it possible to simulate a disk failure by pulling it out of the bay? SSDs appear to fail close together when in a mirrored config so I'd like to know ASAP if one goes down so I can swap them out with minimum delay. UPDATE 26th June 2013 ------------------------ None of the software that ships with the Supermicro X9SCM-* motherboards offer support for RAID monitoring. As has been pointed out here, these boards are built on an Intel chipset for RAID and so I installed Intel Rapid Storage Technology that supports automated email notifications on RAID failure http://www.intel.com/support/chipsets/imsm/sb/cs-020784.htm One small issue, the software only allows you to send email notifications without SMTP authentication. There's a bunch of different workarounds here: http://communities.intel.com/thread/30771

    Read the article

  • Replacing Failing RAID 1 Drive

    - by mrduclaw
    I hope this is a simple question, but I simply don't know anything about RAID. Some time ago I received a machine that, as I understand it, has two drives in it under RAID 1 (or so that one drive is mirrored on the other and appears as just 1 drive to the OS). Recently, one of these drives has started marking a clicking noise and I would like to replace it. I believe the machine has a hardware RAID controller on the motherboard that handles the RAID stuff, but if it matters the Operating System is Windows XP 32-bit. Is the solution to my problem as simple as buying another drive that is of the same capacity and plugging it in where the clicking drive is currently? Or could I possibly lose everything if the drive that's clicking is the one being mirrored on to the other drive? Is there some menu I need to find before unhooking things? Any best practices out there? I'm sure I'm leaving out some required information, so please just tell me what I'm missing. Thanks!

    Read the article

  • Can I rename the CD or DVD RW drive to meaning ful name

    - by Mirage
    I have 7 cd drives. Now i am writing the CDs using NTI MEdia Maker. The problem is all the drive have weird name in the writer like HL DVD RW S224 or something. IT is very hard to find which drive is which. Is there any way to define the Name liek Drive 1, Drive 2 so that in the writer the name come up like that so that if some cd fails to write i can find which drive is that

    Read the article

  • power management of USB-enclosed hard drives

    - by intuited
    With a typical USB hard drive enclosure, is the full range of drive power management functionality available? In what may be an unrelated matter: is it possible to suspend a PC without unmounting an attached USB-powered drive, and then remounting it on resume? This is the behaviour I'm currently seeing (running Ubuntu linux 10.10). Are there certain models or brands that provide more complete control over this aspect of drive operation? My Friendly Neighbourhood Computer Store carries (part of) the Vantec Nexstar product line.

    Read the article

  • How to update the hard disk device drivers for a ghosted hard drive image so it can run on different hardware: Ultra ATA > SATA

    - by rism
    I've ghosted a Winxp machine from one laptop with Ultra ATA drive, and would like to set it up on another laptop as a multiboot option on another hard driver with a SATA drive. I can install the partition fine but if i make it active and try to boot it it blue screens. The blue screen is so fast i cant even read it, other than to make out it's saying "something", im picking probably hard drive as it goes through POST fine. So basically i would like to boot into my Win7 OS, and then somehow manipulate the XP partition to use updated drivers for the new hard drive/laptop so that i can then at least boot into the XP OS on the new machine and update all the other drivers in safe mode or whatever to get it to run. I assume someone is going to tell me to just do a fresh install, but that kinda defeats the purpose of ghosting at this point. There is a significant amount of personalisation, development setup on the XP machine that i would like to just transfer as is. As it stands ive invested minmal time in getting it to run, just a ghost and recovery and then a blue screen boot or two, so its still well worth it to me, time wise to try this way. Thanks.

    Read the article

  • How harmful is a hard disk spin cycle?

    - by Gilles
    It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

    Read the article

  • How harmful is a hard disk spin cycle?

    - by Gilles
    It is conventional wisdom¹ that each time you spin a hard disk down and back up, you shave some time off its life expectancy. The topic has been discussed before: Is turning off hard disks harmful? What's the effect of standby (spindown) mode on modern hard drives? Common explanations for why spindowns and spinups are harmful are that they induce more stress on the mechanical parts than ordinary running, and that they cause heat variations that are harmful to the device mechanics. Is there any data showing quantitatively how bad a spin cycle is? That is, how much life expectancy does a spin cycle cost? Or, more practically, if I know that I'm not going to need a disk for X seconds, how large should X be to warrant spinning down? ¹ But conventional wisdom has been wrong before; for example, it is commonly held that hard disks should be kept as cool as possible, but the one published study on the topic shows that cooler drives actually fail more. This study is no help here since all the disks surveyed were powered on 24/7.

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >