Search Results

Search found 7435 results on 298 pages for 'hardware'.

Page 15/298 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Virtual PC on Windows 7 - Hardware-assisted virtualization is disabled

  - by DLux

  I am running a Lenovo Thinkpad T61 with an Intel Core 2 Duo T7300 processor. When I run Virtual PC in Windows 7, I get the following error: Unable to start Windows Virtual PC because hardware-assisted virtualization is disabled. When running the Hardware-Assisted Virtualization Detection Tool from Microsoft says: Hardware-assited virtualization is not enabled on this computer. Now, in the BIOS, I do have virtualization enabled and according to Intel this processor supports Intel-VT. What am I missing here?

  Read the article

• Debian as USB hardware portable as possible

  - by James Mitch

  I have recent hardware, 64 bit, pae and so on. But I'd like to have my Debian installation on a USB HDD. Installing Debian to USB is solved. I used the i386 architecture image. But a pae kernel has been installed. I want to be able to travel with my USB HDD and therefore I want best possible hardware compatibility. My friends and family have sometimes older hardware, but always i386, just sometimes without 64 bit or pae. Never met someone with sparc or other architectures. What should I do to get non-pae kernel and maximum hardware compatibility?

  Read the article

• Blackberry device GPS hardware specs [closed]

  - by colemanm

  I'm looking to find out detailed specifications for the built-in GPS hardware in the Blackberry Bold and Curve devices (9000 and 8350). RIM's documentation includes just a rudimentary description of the specs, but I'm looking for things like the actual detailed hardware/chipset info so we can research the accuracy needs for some upcoming projects we have. Knowing simply "A-GPS support" isn't really good enough... Does anyone know of any resources for finding advanced specs for built-in Blackberry hardware?

  Read the article

• RAID - software vs. hardware

  - by Robert MacLean

  I have always used hardware based raid because it (IMHO) it's on the right level (feel free to dispute this) and that OS failures are more common to me than hardware issues. Thus if the OS fails the raid is gone and so is the data, where on a hardware level regardless of OS the data remains. However on a recent Stack Overflow podcast they stated they would not used hardware raid as the software raid is better developed and thus runs better. So my question is, is there any reasons to choose one over the other?

  Read the article

• Easy Install Resets Hardware Settings

  - by bob5972

  I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

  Read the article

• Easy Install Resets Hardware Settings

  - by bob5972

  I think there's a problem with the Easy Install setup. I selected "Installer disc image," and it came up and said that it would use "Easy Install," I think I hit next, and then I went back changed my mind, and selected "I will install the operating system later." After finishing the wizard, I think it still went and ran Easy Install, because it auto-installed VMware tools and I never got to select anything for my windows setup. Then, when it was finished, all the hardware changes I had made were lost. The RAM was changed from 2 GB back to the default of 1 GB, my CD ROM drive was set back to "Use a Physical Drive" and "Connect at Power On", and the Floppy Drive was also set to "Connect at Power On", after I disabled them. I was trying to install Windows 7, and I wasn't sure if I could change the RAM settings after installation without needing to reactivate it, so I deleted the VM and tried to start over. This time, the "Installer disc image" had my Win7 image pre-selected, so I clicked "I will install it myself later," set my hardware again, and tried to boot off my CD. Again,it did an Easy Install, and reset my RAM and my drive settings. So I deleted it again and the third time it still had the Win7 image pre-selected, but this time I unplugged all the drives and let it try to boot off the empty harddrive and fail, and made sure it kept all my hardware settings. Then, I powered it off, put my Win7 image in the guest CD ROM, and powered it on. This time it finally let me run the installer and pick my language, and type a user name. This time when I powered it off it kept my hardware settings. I can duplicate the error by doing exactly the steps above. Creating a new VM, selecting my "Installer Image," hitting next, going back, selecting "I will Install it myself," and then finish the wizard, and customizing my hardware right before the end, setting the CD Rom drive to the same installer media, and setting "Connect on Power On." (If I start it without the CD ROM in the first time, it doesn't do it). When I power on, I'm not prompted for any install information (like language and user name), and when it runs the first timemy hardware choices are reset (like the RAM back to 1 GB). If it helps, I'm running VMware Workstation 7.0.1 build-227600 on Gentoo Linux

  Read the article

• Server Hardware on the Desktop

  - by jcnnghm

  When I rebuild my desktop, I'm thinking of using server hardware instead of desktop hardware. I want to do this so I can easily add a lot of ECC memory (~20GB), and possibly more than one processor. I know that video hardware could be a problem, especially because I use 4 monitors. I should be fine with this, as long as I have two pci-e channels. Are there any downsides to doing this? Anything I'm not seeing?

  Read the article

• Windows Server 2008 R2 bare metal restore to different hardware

  - by S Falken

  Scenario: I have a Windows Server 2008 R2 x64 installation whose main disk drive is now 7 years old and showing signs of age. For the last couple of months it's been displaying increased errors and requirements to run checkdisk. I have successfully created a bare metal restore (BMR) image on a separate data drive on the server, which can be seen from the Windows Recovery console; I tested it by booting to and using the Windows Server installation DVD's recovery utilities. The BMR image includes the system drive with boot partition, system state, and the D:\ drive of the server, which is where I have followed the practice of installing any program that does not require a C:\ installation path. Therefore, the BMR includes both the C:\ and D:\ drives, system state and boot partition. The C:\ drive is a 7-year old Seagate 160GB. The D:\ drive is a rather newer 120GB Western Digital. I have purchased a 128GB solid state Samsung 830 that I want to restore these partitions to, using the BMR. Questions: In the above-referenced article, Microsoft seems to be indicating that I am only able to restore to like-kind hardware, which doesn't help at all and is difficult to believe. Is this really true? I've cleaned these drives up and minimized the size of partition they require. C:\ will need about a 70GB partition, and the data on D:\ will need about 50GB. Will Windows Server backup allow me to restore the BMR to newly-created partitions on the SSD, discarding extra space? I don't need a "how-to": I just need an "is it possible". Justification: Before posting this question, I checked ServerFault articles with the following titles, but none of them were about this exact scenario: Restore SBS 2008 Backup to Same Hardware but Different Disk Configuration Restoring Windows Server 2008 to different hardware - OEM License Restoring II6 server after a hardware failure windows 2008 r2 fail to restore Domain controller failed to restore using windows backup tools How does restore to dissimilar hardware work? Migrating Windows 2008 R2 from a PC to a different PC TFS 2005 Server restore from one hardware to another I also researched Microsoft but only received an oblique answer which was not precisely aimed at my question, at the following URL: http://support.microsoft.com/kb/249694#method3

  Read the article

• How can I know if a computer supports hardware-assisted virtualization before I purchase the computer?

  - by Poaters

  I'm an iPhone programmer who is no longer in possession of a personal Mac computer on which to use XCode. I have two Windows desktops, and I would like to run OS X in VMWare rather than purchase Apple's expensive hardware. However, neither of my machines supports hardware-assisted virtualization, which is required to virtualize OS X. I went shopping online for a computer today, since I've been planning to purchase a laptop anyway, but sites like Best Buy don't appear to give any indication of whether or not a product supports this. Is there any other site out there or some trick to figuring this out other than buying the machine and running Microsoft's nifty little detection tool?

  Read the article

• High end mobile workstations with pointer stick

  - by Elijah Lynn

  I am looking for a list of higher end mobile workstations that run Ubuntu/Kubuntu well and also have a hardware pointer stick. Here's an illustration of one (from sciencesurvivalblog): I wouldn't mind getting a Macbook Pro and wiping it but they refuse to use pointer sticks and to me, they are extremely efficient. I see a lot of potential for Lenovo thinkpads as well. System 76 said they have no plans to implement a hardware pointer stick so that leaves them out as well. Any ideas?

  Read the article

• How to enable desktop effects on Ubuntu 10.04 after upgrade from Ubuntu 8.04?

  - by Manohar Bhattarai

  I upgraded my Ubuntu 8.04 to Ubuntu 10.04. When I try to enable desktop effects it says "Desktop effects could not be enabled". The output of "lspci | grep VGA" is : 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) Hardware drivers says there is no propriority hardware driver. I installed nVidia driver but I think my is an Intel graphics device. Please help.

  Read the article

• How add cpu frequency that should be available?

  - by Andrew Redd

  I have a system with an Intel Core i7 970 that should be able to run at 3.2 GHz. I'm running ubuntu 12.04 and installed the cpufreq indicator to be able to change the governor and noticed that I only had frequencies up to 2.0 GHz available to me. I set to performance and checked with cpufreq-info cpufreq-info -c 0 cpufrequtils 007: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to [email protected], please. analyzing CPU 0: driver: acpi-cpufreq CPUs which run at the same hardware frequency: 0 1 2 3 4 5 6 7 8 9 10 11 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 10.0 us. hardware limits: 1.60 GHz - 2.00 GHz available frequency steps: 2.00 GHz, 1.86 GHz, 1.73 GHz, 1.60 GHz available cpufreq governors: conservative, ondemand, userspace, powersave, performance current policy: frequency should be within 1.60 GHz and 2.00 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 2.00 GHz (asserted by call to hardware). cpufreq stats: 2.00 GHz:4.93%, 1.86 GHz:0.03%, 1.73 GHz:0.02%, 1.60 GHz:95.02% (718654) And to double check: $ cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies 1995000 1862000 1729000 1596000 How do I get all the frequencies that I should have available to me, all up to the 3.2 GHz?

  Read the article

• Solutions for cheaply replacing poorly-supported onboard ATI card with discreet graphics on desktop machine?

  - by echo-flow

  I have put Ubuntu on my mum's desktop computer. Unfortunately, the open source radeon driver does not work well with the onboard ATI graphics, and ATI's proprietary driver no longer supports the hardware at all. In order to use the ATI proprietary driver with this hardware, it is necessary to use an older version of Xorg, which is now only available in versions of Ubuntu older than 8.10. Unfortunately, the open source radeon driver seems to be causing X to lock up intermittently when my mum uses Audacity. I'm willing to accept that some hardware is not well-supported on Ubuntu, and so, because this is a desktop computer with a couple of free PCI slots, I think a better solution might simply be to plug in a new graphics card that might have better driver support, and to disable the onboard ATI card in the BIOS. The requirements for this card are that it be inexpensive and have robust (preferably open source) driver support in Ubuntu 10.04. Heavy-duty graphics processing power is not a requirement. A second-hand card on Ebay would also be fine. Can anyone make some recommendations?

  Read the article

• Which Xorg driver (not kernel driver) to use with GMA500/Poulsbo video hardware in 12.04

  - by Somejan

  I have a Asus EeePC with a GMA500 video card. I followed the instructions on https://wiki.ubuntu.com/HardwareSupportComponentsVideoCardsPoulsbo/, which made the netbook boot correctly. Without any xorg.conf file, Xorg uses the VESA driver, which is quite slow. Manually specifying fbdev as driver in xorg.conf also works. Which one should I use? Are there any other drivers for Xorg that do better at 2d accelleration (since the kernel driver doesn't support 3d acceleration)?

  Read the article

• Hardware Guy

  <b>Praxagora:</b> "The moment the passengers&#8217; coats came down from their faces, he fumed. When they came within hearing he hissed at Elsa, &#8220;What did you do with him? He&#8217;s supposed to be blindfolded.&#8221;"

  Read the article

• Installing Ubuntu on a computer with USB 3.0 hardware

  - by Matt

  I'm installing Ubuntu 10.10 32-bit version on an HP Envy 15. I get the same problem these people have here: "unable to find a medium containing a live file system" error when installing but the question was never resolved. I spent so long researching and got so frustrated that I took my computer down to a shop and asked them to install it for me. It took them a while but they managed to get it installed. The reason for this error they had said was because Ubuntu didn't have the USB 3.0 drivers it needed to install properly. I'm reinstalling Ubuntu yet again and I've run into the same issue so my question is: does anyone know.. a) Where to get these USB 3.0 drivers? b) How to get them installed when installing the Ubuntu OS? Thanks, Matt

  Read the article

• Report: How Compiz Fusion and Chaos Built a Linux Hardware Company

  ZaReason is a popular independent Linux computer company, founded by Cathy and Earl Malmrose. Cathy Malmrose tells the tale of how ZaReason came into existence thanks to chaos and Compiz Fusion.

  Read the article

• wifi hardware switch doesn't work on a Dell 1018

  - by user42566

  I have a problem with my Dell 1018 Inspiron. I can't switch the wifi on, through the key on the keyboard. I think it's a driver problem since Ubuntu 11.10. This are the versions i tried: Ubuntu 10.04 / 10.10 It's possible to install the driver by hand: sudo add-apt-repository ppa:lexical/hwe-wireless sudo apt-get update sudo apt-get install rtl8192ce-dkms Ubuntu 11.04 It works out of the box Ubuntu 11.10 / 12.04 I haven’t found any solution for these versions. The "ppa:lexical/hwe-wireless" doesn't work for these versions. It says Can not find package rtl8192ce-dkms. The window of additional drivers is empty. So I can't install the driver. The wired network works good. Here is some information: 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: yes sudo lshw -class network *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 05 serial: 5c:26:0a:0d:20:10 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:43 ioport:2000(size=256) memory:f0f2c000-f0f2cfff memory:f0f18000-f0f1bfff *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: wlan0 version: 01 serial: 70:f1:a1:fe:15:bd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-22-generic-pae firmware=N/A ip=192.168.1.76 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:3000(size=256) memory:f0100000-f0103fff mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] 00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) 00:1d.0 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA Controller [AHCI mode] [8086:27c1] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01) mark@mark-Inspiron-1018:~$ mark@mark-Inspiron-1018:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 174f:1127 Syntek mark@mark-Inspiron-1018:~$

  Read the article

• Nvidia driver cannot be installed with jockey for old hardware

  - by Alen

  I have a GeForce FX/5-series card and I cannot install the driver using the Additional Drivers (jokey) tool. I just installed Ubuntu 12.04 and installed all nvidia drivers, but my drivers are not activated, when I open Nvidia settings manager I get the following message: You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. Can you help me with this?

  Read the article

• November eSTEP nyhedsbrev til hardware partner presales

  - by user12842157

  Kære partner,Vi vil hermed gøre dig opmærksom på at November versionen af vores eSTEP nyhedsbrev nu kan findes på eSTEP portalen. Du finder omtalte nyhedsbrev på vores portal under eSTEP News ---> Latest Newsletter. For at få access til portalen skal du bruge linket nederst i denne blog. Nyt fra Oracle: Reflektioner over Oracle OpenWorld, Oracle Buys GoAhead Det tekniske hjørne: T4 processor, SPARC SuperCluster T4-4, Pillar Axiom 600,  Oracle ZFS Appliance,  Hybrid Columnar Compression Support for ZFS Storage Appliances and Pillar Axiom Storage Systems, Oracle Exalytics In-memory Machine, Oracle Big Data Appliance, Oracle Database Express Edition 11g Release 2(Oracle Database XE), Oracle Public Cloud Træning og events: eSTEP Events Schedule, Recently Delivered TechCasts, Delivered Campaigns in 2011, Q&A covering Oracle Database Appliance How to ...: Oracle Server Finder - choose the system that is right for your, Power calculator for all the HW, SW documentation search , TO YOUR ATTENTION - Remarks to new configuration-options for 7120 URL: http://launch.oracle.com/PIN: er sendt til vores kontaktliste, ellers henvend dig til : [email protected] versioner af dette nyhedsbrev kan findes på portalen under "Archived Newsletters", mere information findes også under Events, Download og Links.Vi værdsætter enhver feed back på indholdet på portalen og anden information vi leverer.Med venlig hilsenPartner HW Enablement EMEA

  Read the article

• Update ATI 3D Rage Drivers before adding any New Hardware

  The latest version of the ATI 3D Rage drivers are necessary for the graphic cards to perform their job better helping you enjoy an amazing video or gaming experience. Remember that you have to update... [Author: Sunny Makkar - Computers and Internet - March 20, 2010]

  Read the article

• Donate Your Old Hardware

  <b>System 76:</b> "System76 has partnered with a non-profit, Kids on Computers, to help bring computers and free and open source software to disadvantaged kids."

  Read the article

• Circular motion on low powered hardware

  - by Akroy

  I was thinking about platforms and enemies moving in circles in old 2D games, and I was wondering how that was done. I understand parametric equations, and it's trivial to use sin and cos to do it, but could an NES or SNES make real time trig calls? I admit heavy ignorance, but I thought those were expensive operations. Is there some clever way to calculate that motion more cheaply? I've been working on deriving an algorithm from trig sum identities that would only use precalculated trig, but that seems convoluted.

  Read the article

• Ubuntu Enterprise Cloud Deployed on Intel Hardware

  <b>Softpedia:</b> "Canonical, the company behind the very popular Ubuntu Linux distribution, recognizes the potential of the emerging market and has partnered with Intel and Eucalyptus to promote its Ubuntu Enterprise Cloud (UEC) offering as part of Intel's Cloud Builder program."

  Read the article

• Phonon - Audio Hardware Setup

  - by Michael

  Does anyone know what configuration file is modified when I change settings within this area of the system settings? I keep choosing my Logitech USB Headset as the soundard, and, when I hit apply, it accepts that change and all is good. However, as soon as I close the system settings window, it loses the setting, so I have to leave it open all the time. How can I make this setting permanent? Thanks for any assistance. I'm actually running Kubuntu 11.10.

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >