Search Results

Search found 682 results on 28 pages for 'imhotep is invisible'.

Page 15/28 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• How to connect to my own WiFi using Broadcom STA drivers?

  - by Chris

  I'm trying hard to switch to Linux from Windows because of my engineering project. Unfortunately, everything is against that change! Before I have installed Broadcom STA proprietary drivers, I was seeing on NetworkManager and nm-applet only local radio-internet-access networks. After I installed Broadcom STA, I see my neighbor's wireless network (channel 11, WEP) Neither before nor after the installation is own wireless network available. Computer: Asus Lamborghini VX6 Ubuntu: 12.04 LTS 64-bit Router: ASUS N55U (A1) with newest AsusWRT firmware Network: Channel 5 (tried also 10 and 11, both on 20 and 40MHz bands), WPA2 Personal, 2,4 + 5 GHz (what is not very important, 'cause the wlan card in VX6 is only 2,4GHz). Network works fine on Windows, also through D-Link repeater on the other floor. Unfortunately, same network is invisible to Ubuntu on same machine. I have tried some combinations with other GUIs but it did not work. Are there any better drivers for Ubuntu? I need that network badly, but I'm an Ubuntu newbie, so I don't know how to solve that problem. Please help.

  Read the article

• How can I remove unmounted SD Card icons from my desktop?

  - by user75286

  I have been using some audio utilities in Ubuntu 11.10 to tweak .mp3 files on my phone (Motorola Photon 4G). I connect via USB... both my phone and the internal SD card are mounted as two separate drives. The SD card has an unusual drive name with some odd characters. When I'm finished, I unmount my phone (or "safely remove drive"), but the SD card can't be unmounted. I've mounted and unmounted my phone on 4 occasions now, and there are now 4 SD card drive icons that I can't remove from the desktop. I tried using the gconf-editor/apps/nautilus/desktop trick to make drives invisible and it's not working. Right-clicking on the icons and selecting "unmount" produced the following error message; (I can't type the unusual drive name characters... replaced with xxx) Unable to unmount xxx umount: /media/xxx is not mounted (according to mtab) How can I remove the unwanted icons from the desktop and is there a method for avoiding this problem in the future? Thanks!

  Read the article

• How do you proactively guard against errors of omission?

  - by Gabriel

  I'll preface this with I don't know if anyone else who's been programming as long as I have actually has this problem, but at the very least, the answer might help someone with less xp. I just stared at this code for 5 minutes, thinking I was losing my mind that it didn't work: var usedNames = new HashSet<string>(); Func<string, string> l = (s) => { for (int i = 0; ; i++) { var next = (s + i).TrimEnd('0'); if (!usedNames.Contains(next)) { return next; } } }; Finally I noticed I forgot to add the used name to the hash set. Similarly, I've spent minutes upon minutes over omitting context.SaveChanges(). I think I get so distracted by the details that I'm thinking about that some really small details become invisible to me - it's almost at the level of mental block. Are there tactics to prevent this? update: a side effect of asking this was fixing the error it would have for i 9 (Thanks!) var usedNames = new HashSet<string>(); Func<string, string> name = (s) => { string result = s; if(usedNames.Contains(s)) for (int i = 1; ; result = s + i++) if (!usedNames.Contains(result)) break; usedNames.Add(result); return result; };

  Read the article

• Does Exchange have ability to run hidden mailboxes?

  - by MadBoy

  Hello, Title of my question may sound a little bit odd but I was thinking if Exchange 2010 or 2007 or any program that would work in conjunction with Exchange has ability to create this structure: Users having their normal mailboxes connected and using them as everyone would in Outlook 2003/2007/2010. Users having additional mailboxes (from old Exchange 2003) attached but hidden on demand of Administrator. For example administrator could easy disable them just like they never been attached making them invisible to users and everyone else. Would be good if such mailboxes could be easily removed out of system (lets say on external drive) by simple step not manual job for 100 mailboxes. Users without ability to copy/move their mails to outside storage (like a local .pst file)? Do you guys have any suggestions on this? I was thinking maybe using public folders but this seems like overkill and not really suited for this. And please don't ask me why I need this type of security (it's not something I requested).

  Read the article

• Unity, changing gravity game & stopping character when he hit a wall.

  - by Sylario

  i am currently working on a 2d puzzle game in the unity engine. One of the aspect of this game is the possibility to rotate the level of 90°. It also rotate the gravity. The main character is not directly controlled by the player, but instead fall when the level is rotated. When the main character hit a wall, he should stop to move. If i do not stop it, it kind of blink ans shake against the wall. To stop it i detect collision and depending on the current rotation state, the player will stop at "vertical" or "horizontal" tags when a OnCollisonEnter occurs. I must do that because when the player fall on his relative ground, He must not stop like if he had touch a wall. My problem is the 'side' of platform, or the 'top' of wall, they use the same tag and thus do not give the correct tag to my character. I tried to put a very small invisible box on top/side of elements but the collision occurs nevertheless. It seems when the player falls and hit something he go through a bit before being replaced at correct position by unity. Is there a way : 1 ) to doesn't stop my character but to make it appear immobile on screen 2 ) To detect a "i cannot move anymore" collision other than by using collision?

  Read the article

• Looking for a way to give acces to some programs for a limited period of time

  - by R. L.

  I install Linux on computers and add to the base installation some other programs. This computer then is sold to a customer as a larger instrument. Now, I am looking for a way to implement some kind licence for this computer so the user can use it for a year and then he would need to "renew" the licence. It is not my intention to lock the whole computer , blocking or deleting some folders should be enough. The only way I could think of was to setup a cron job that deletes my programs, or a second way would be to set the user account to expire after a year. But I give the computer with sudo privilages so the above solutions wouldn't be 100% safe. It is not my intention to encrypt any code, I just want block the possibility to execute certain programs. Is there a way or a program that would "licence the computer" ? Ideally it should be invisible to the user. After one year the program stops working and "he doesn't know why."

  Read the article

• How to select the account on the login screen of Windows7 by start typing the name?

  - by akira

  When MacOS boots up and the users is prompted to select the account (s)he wants to login into, the users can either click the name / icon of the account with the mouse or just type in the name of the account. I want to do the same at the login screen of Windows7: Login screen pops up, I start to type my account name, I select the account with enter and then I type the password and enter again. No usage of the mouse involved. (I am aware of tab-cycling and hard-to-follow-the-almost-invisible-marker-of-where-the-focus-is-right-now)

  Read the article

• Cannot resolve a single A Record from client machine

  - by Alex

  I set up a simple Bind server on my VPS and it is working properly. The problem occurs with my local windows machines, which are connected to internet through the home router. I created an A-record named 'dev' and it is invisible from my local network for some reason, though people from other locations can resolve dev.mydomain.com. Ironically, dev.mydomain.com cannot be resolved for myself only. If I add another A-record, say, 'gamma' then it becomes visible from my local windows machines instantly. So this is just for that particular 'dev' name. The only difference is that I had dev.mydomain.com server on another IP but that was a month ago; all nameservers have been changed since then. I tried to reboot my router and flushed dns cache on windows machines: no result. Thank you in advance.

  Read the article

• Windows server 2008 - Access Based Enumeration (ABE) not working correctly

  - by Napster100

  I have a folder shared with permissions of only one user account, admin account and admin group having access to it, but when I open the shared area from a second user account which dose not have access to it, the folder is still visible to the second account despite ABE being enabled on it and all other parent directories/folders and even the the drive. The user can't access the shared folder (which is what I want), but I'd like the folder to also be invisible to that user, just to make it look cleaner and theirs no confusion between what they can access and what they cannot. How would I stop the folder appearing for users who don't have permissions to use it? Thanks in advanced. EDIT: I've just added the second user account to the permissions list but denied it access so that the account definitely has no permissions to access it in any way but that's still not hiding it.

  Read the article

• Unable to delete files in Temporary Internet Files folder

  - by Johnny

  I'm on Win7. I have a large number of of large .bin files, totaling 183GB, in my Temporary Internet Files folder. They all seem to come from video sharing sites like youtube. The files are invisible in Explorer even after allowing viewing of hidden files. The only way I can see them is by issuing "dir /fs" on the command line. Now when I try to delete them from the command line nothing happens. Trying to delete the whole folder from Explorer results in access denied because another process is using a file in the folder (IE is not running while I'm doing this). Trying to clear the folder using IE is also unsuccessful. How do I delete these files? How did they end up being there without being deleted by IE?

  Read the article

• How can one make the title bar text/buttons have better contrast on dark colors in Windows 8?

  - by zeel

  When Windows 8 color setting are set to a very dark color, such as black or navy blue, the title bar text and the minimize/maximize buttons are nearly invisible. This makes dark colors difficult to work with. In Windows 7 there was an advanced color options, this is gone in 8. The registry keys associated with this seem to still be present, but they have no effect. Is there a way to change this? Or a third party application that can do it? I don't want to use the ugly high contrast theme, I want to use the nice Win 8 theme with a dark color.

  Read the article

• Can't see CMD.EXE on Windows 7

  - by Andrea

  I have a problem with Windows 7 and cmd.exe with these conditions: Logon as non admin user Launch cmd.exe I can see cmd.exe in task manager but it's invisible in the desktop and I don't know what to do, everything is fine and I can see cmd.exe if I do login with an admin account. I can see it in the "Process" tab but not in the "Application" tab, and if I launch five cmd.exe's, I see five processes, but from that tab I have no "Bring to front" or "Maximise" I can't find any WOW folder under C:\Windows, even with show hidden and system files enabled. I'm running Windows 7 32-bit running on a 64-bit Intel Core 2 Duo E7500

  Read the article

• How to set individual NTFS partitions permissions behaviour for each user account?

  - by ryniek

  I have two NTFS partitions (DOWNLOADS for downloaded files and VM for my VirtualBox .vdi file) for which i must have full permissions for my allday use account. They should be also automounting when i login to this account. But i've also set Guest account for guests. For Guest account, i want make VM partition fully disabled and invisible (and thus it mustn't automount) but DOWNLOADS partition should be shared with limited privileges with Guest account. Editing fstab i'm able to share DOWNLOADS partition with Guest on limited privileges but VM can be only set to limited and have disabled automounting - so guest can't mount it but it still can be seen in Nautilus, plus I must always mount it manually when i login to allday account. Is there some trick to make what i want? Here's my fstab config: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda1 : UUID=35e66658-5ee9-40cf-bf56-8204959e3df0 / xfs defaults 01 #Entry for /dev/sda2 : UUID=26c714cf-4236-45e7-9c46-cfcf91a215ae /home xfs defaults 02 #Entry for /dev/sda5 : UUID=1315BCB027C44639 /media/DOWNLOADS ntfs-3g auto,uid=1000,gid=1000,umask=0022,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda6 : UUID=60FF39EB72B72264 /media/VM ntfs noauto,uid=1000,gid=1000,umask=0077,nodev,locale=pl_PL.utf8 0 0 #Entry for /dev/sda7 : UUID=c52411f5-105c-45d1-971f-412f962c350e none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks

  Read the article

• Mail.app slow to include new messages

  - by Chris Tompsett

  With Leopard I was able to link to the University's Exchange 2003 server with and IMAP connection and mail out directly vie the SMTP client. With Snow Leopard I attempted to update to a full Exchange service (Exchange 2007). Almost all has worked OK (ical, address, etc.) except that new mail posted to my email account, which is visible using a 'web' interface to Exchange remains invisible for some random number of hours. Those who are running the Exchange server have no interest in discussing the problem. Has anyone else had a similar experience?

  Read the article

• How do spambots work?

  - by rlb.usa

  I have a forum that's getting hit a lot by forum spambots, and of course the best way to defeat something is to know thy enemy. I'll worry about defeating those spambots later, but right now I'd like to know more about them. Reading around, I felt surprised about the lack of thorough information on the subject (or perhaps my ineptness to input the correct search terms for better google results). I'm interested in learning all about spambots. I've asked on other forums and gotten brush-off answers like "Spambots are always users registering on your site." How do forum spambots work? How do they find the 'new user registration' page? (I'm especially surprised because some forums don't have a dedicated URL for this eg, www.forum.com/register.html , but instead use query strings or even other methods invisible to the URL bar) How do they know what to enter into each 'new user registration' field? How do they determine what's a page they can spam / enter data into and what is not? Do they even 'view' this page at all? ..If not, then I'd assume they're communicating with the server directly - how is - this possible? How do they do it? Can forum spambots break CAPTCHAs? Can they solve logic questions (how?)? Math questions? Do they reverse-engineer client-side anti-bot validation scripts? Server-side scripts? What techniques are still valid to prevent them? Where do spambots come from? Is someone sitting behind the computer snickering as they watch their bot destroy site after site? Or are they snickering as they simply 'release' it onto the internet somehow? Are spambots 'run' by an infected computer somewhere? Do they replicate themselves? etc

  Read the article

• external usb hard drive is not being seen anymore

  - by incrediblehulk

  I think my problem is a little different than several other similar titled questions. Everything started while I was using 10.10. External drive was always recognized and mounted, but the timing of this differed. I mean when I booted, the OS sometimes saw the drive immediately, sometimes after a few minutes, sometimes after hours. Although this was annoying, I tolerated this somehow. Then this problem persisted after I upgraded to 11.04 with a clean install. Afterwards, the drive became totally invisible to the OS. It is not even detected as an usb device anymore. However, there is one thing I can do to make it seen. If I boot to another operating system which can detect the drive, and then boot back to ubuntu, everything is perfect. but this is of course very impractical. To summarize, the usb drive is recognized by ubuntu if and only if another OS in the same computer could recognize it first. I should also say I have not had any problems with the same drive in any other OS or a different computer. My drive is philips with a hitachi hdd inside, has its own power source and any other usb powered drives have never caused this kind of a problem. I've tried almost all recommendations in similar topics but none of them seems to be related to this one. What can I possibly do to fix this?

  Read the article

• Release Notes for 3/2/2012

  Here are the notes for today’s release: Added a progress indicator when saving issues. Added support for viewing CodePlex RSS feeds in Chrome. Deployed several bug fixes: Fixed an issue where the back button on Internet Explorer was not working as intended when browsing code. Fixed an issue where long commit comments would push the source control info box outside of the boundaries of the page. Fixed an issue where Internet Explorer users were not able to widen the frame of the source code browser until a file was selected. Fixed an issue where opening a source code file directly from a URL in Internet Explorer would cause the source code tree to be collapsed. Fixed an issue where adding a code snippet with long lines of text to a discussion thread using Internet Explorer would needlessly display a vertical scrollbar, limiting the amount of code visible. Fixed an issue where tabbing through some links would render them invisible. We deprecated support for embedding PreEmptive analytics statistics on the project statistics page. If you’re interested in collecting and reporting your own statistics, PreEmptive’s RunTime Intelligence Endpoint Starter Kit offers a good starting point for capturing data. Have ideas on how to improve CodePlex? Visit our ideas page! Vote for your favorite ideas or submit a new one. Got Twitter? Follow us and keep apprised of the latest releases and service status at @codeplex.

  Read the article

• Disappearing mouse cursor in Word, Notepad, Outlook

  - by user161548

  I purchased a lenovo led monitor as a second monitor so I have dual screens now. Everything works great except all text programs make my cursor disappear on the new monitor. Everything works great on the old monitor but if I drag a text document to the new screen the cursor is invisible. Any ideas on what to try? Odd to me that it works on one and not the other so assuming it has something to do with the monitor but none of the settings seem to make a difference.

  Read the article

• Clean Install Windows on a Acer Aspire Laptop with a Hybrid Drive

  - by user1325179

  I'd like to do a clean install of Windows 8 on my Acer Aspire laptop (Aspire M5-481PT) with a hybrid drive. Physically, there seem to be two hard drives (an HDD and an SSD). So when I try to clean install Windows, I am asked to pick a drive. The HDD has five partitions (some seem to be recovery related), and the SSD has two partitions. Which partitions should I delete (if any), and onto which drive should I install Windows 8? And then how can I instruct Windows 8 to use the HDD-SSD combination as a hybrid drive? Edit: Currently, the operating system seems to be installed (from the factory) on the HDD. The SSD is invisible in File Explorer. It is only visible in disk utilities. I'm betting I need to install Windows to the HDD, and then point Windows to use the SSD for the hybrid relationship. Also, the SSD is about 20 GB. The HDD is about 450 GB.

  Read the article

• How can one make the title bar text have better contrast on dark colors in Windows 8?

  - by zeel

  When Windows 8 color setting are set to a very dark color, such as black or navy blue, the title bar text and the minimize/maximize buttons are nearly invisible. This makes dark colors difficult to work with. In Windows 7 there was an advanced color options, this is gone in 8. The registry keys associated with this seem to still be present, but they have no effect. Is there a way to change this? Or a third party application that can do it? I don't want to use the ugly high contrast theme, I want to use the nice Win 8 theme with a dark color.

  Read the article

• How can I set `less` or `more` max lines (scrollable height) limit/boundary in linux?

  - by Rudie

  (Sorry for the title. Any suggestions?) I've set my commandline PS1 to cover 3 lines: white space user, server and pwd $ or # to input I think less (or more?) is configured to break after window's height - 1, because when I do a $ git log, the first two lines are invisible at the top of the window and the rest is scrollable. I'm not sure who handles this scrolling and its configuration, but I assume GIT uses less/more. Where can I configure that my scrollable window is window height - 3 lines and not window height - 1? More info: If I cat lines.txt | less with a 23 line file, it shows the entire file and no scrolling. If I do the same with a 24 line file, it doesn't show line 1 (and no scrolling). With 25 lines: doesn't show lines 1 and 2 (and no scrolling). With 26 lines: shows line 1 and scrolling! The less breakpoint is at the wrong height...

  Read the article

• How can I guarantee a solvable Fifteen Puzzle shuffle?

  - by Codemiester

  I am making a 15 Puzzle game in C# that allows the user to enter a custom row and column value up to a maximum of a 10 x 10 puzzle. I am having problems with the shuffle method. I want to make it so the puzzle is always solvable by first creating a winning puzzle then shuffling the empty space. The problem is it is too inefficient to call every click event each time. I need a way to invoke the click event of a button adjacent to the empty space but not diagonal. I also use an invisible static button for the empty spot. The PuzzlePiece class inherits from Button. I am not too sure how to do this. Here is what I have: private void shuffleBoard() { //5 is just for test purposes for (int i = 0; i < 5; i++) { foreach (Control item in this.Controls) { if (item is PuzzlePiece) { ((PuzzlePiece)item).PerformClick(); } } } } void PuzzlePiece_Click(object sender, EventArgs e) { PuzzlePiece piece = (PuzzlePiece)sender; if (piece.Right == puzzleForm.emptyPiece.Left && piece.Top == puzzleForm.emptyPiece.Top) { movePiece(piece); } else if (piece.Left == puzzleForm.emptyPiece.Right && piece.Top == puzzleForm.emptyPiece.Top) { movePiece(piece); } else if (piece.Top == puzzleForm.emptyPiece.Bottom && piece.Left == puzzleForm.emptyPiece.Left) { movePiece(piece); } else if (piece.Bottom == puzzleForm.emptyPiece.Top && piece.Left == puzzleForm.emptyPiece.Left) { movePiece(piece); } }

  Read the article

• What is the best way to browse the web safely? [closed]

  - by cedivad

  At the recent pwnown we saw every single browser, from IE to Chrome, miserably hacked. That scares me. How should we browse the Internet safely but continuing to enjoy it? (using lynx is not an option) Virtual machines? Different users with non-administrative privileges? Keep the work and "Facebook" on 2 separate machines? (or on 2 hard disks, invisible each other?) I think that they should write a book on the matter.

  Read the article

• How do I make two different Google Chrome profiles?

  - by ldigas

  I have a laptop which I use for (the major part) of my work and private life, and would like to set those two apart starting with Google Chrome. So far, my Google Chrome contains my work bookmarks, logins/passwords and everything else ... which I use for work, which I use privately, which I use in my spare time (funny Youtube videos, what else :) Is it possible to define multiple Google Chrome profiles, let's say work and free-time, so one can quickly switch between them, where bookmarks, logins and so on, from one would be invisible in the other, and vice versa? Also, is it possible to put them into some directory different from the default, so one can easily backup them, when needed? If it is, could anyone describe it in simple terms, or his experiences if she/he has a better way of going about this?

  Read the article

• Smooth Div Scroll jquery not scrolling

  - by Razor

  The Smooth Div Scroll is great but for some reason the area no longer scrolls when I edit or remove the #makeMeScrollable or #makeMeScrollable div.scrollableArea * When I leave it as is it works. Which is a problem for customization. and it won't work after I take the "*" out of div.scrollableArea * If I edit the part with the It's been frustrating figuring out why that part which is supposed to be editable not work at all. Any help with this jquery would be helpful! Thanks in advance! /* You can alter this CSS in order to give SmoothDivScroll your own look'n'feel */ /* Invisible left hotspot */ div.scrollingHotSpotLeft { /* The hotspots have a minimum width of 75 pixels and if there is room the will grow and occupy 10% of the scrollable area (20% combined). Adjust it to your own taste. */ min-width: 75px; width: 10%; height: 100%; /* There is a big background image and it's used to solve some problems I experienced in Internet Explorer 6. */ background-image: url(../images/big_transparent.gif); background-repeat: repeat; background-position: center center; position: absolute; z-index: 200; left: 0; /* The first cursor url is for Firefox and other browsers, the second is for Internet Explorer */ cursor: url(../images/cursors/cursor_arrow_left.cur), url(images/cursors/cursor_arrow_left.cur),w-resize; } /* Visible left hotspot */ div.scrollingHotSpotLeftVisible { background-image: url(../images/arrow_left.gif); background-color: #fff; background-repeat: no-repeat; /* Standard CSS3 opacity setting */ opacity: 0.35; /* Opacity for really old versions of Mozilla Firefox (0.9 or older) */ -moz-opacity: 0.35; /* Opacity for Internet Explorer. */ filter: alpha(opacity = 35); /* Use zoom to Trigger "hasLayout" in Internet Explorer 6 or older versions */ zoom: 1; } /* Invisible right hotspot */ div.scrollingHotSpotRight { min-width: 75px; width: 10%; height: 100%; background-image: url(../images/big_transparent.gif); background-repeat: repeat; background-position: center center; position: absolute; z-index: 200; right: 0; cursor: url(../images/cursors/cursor_arrow_right.cur), url(images/cursors/cursor_arrow_right.cur),e-resize; } /* Visible right hotspot */ div.scrollingHotSpotRightVisible { background-image: url(../images/arrow_right.gif); background-color: #fff; background-repeat: no-repeat; opacity: 0.35; filter: alpha(opacity = 35); -moz-opacity: 0.35; zoom: 1; } /* The scroll wrapper is always the same width and height as the containing element (div). Overflow is hidden because you don't want to show all of the scrollable area. */ div.scrollWrapper { position: relative; overflow: hidden; width: 100%; height: 100%; } div.scrollableArea { position: relative; width: auto; height: 100%; } #makeMeScrollable { width:100%; height: 330px; position: relative; } #makeMeScrollable div.scrollableArea * { position: relative; float: left; margin: 0; padding: 0; } http://www.smoothdivscroll.com/ //^above link to the jquery I am talking about

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >